Visit our web site:

Transcription

1 Compliance and Applications ICAO Annex NATO STANAG BS: Part, inset fixtures IEC: Category I, II and III all weather operation airfield lighting systems. Our ZA medium intensity, omnidirectional fixture is suitable for use as a taxiway edge and taxiway intersection light. Why Our ZA is Better Lightweight and robust aluminum alloy construction. ZA has been tested to, PSI (pounds per square inch) and conforms with both FAA and IEC requirements. Long life lamps (objective life of, hours at full brilliancy). Pressure test plug ensures moisture -proof light cavity. Prism removal and replacement achieved without need for adhesives or sealants. Pre-focused optics simplify maintenance. Corrosion resistant anodized finish. Available for non-airport applications such as heliport and architectural lighting with W, V or V lamps. Specifications Low profile:." (mm). Light channel within." (mm) of grade. Corrosion resistant finish meets U.S. Military Standard Salt Fog Test (MIL-STD-E, Method.) and IEC EN -- (Test Kb, severity ). Color beam variations achieved by dichroic coating. Exceeds L- photometric requirements when used as a medium intensity white runway edge light..a from W, W or W isolating transformer. Taxiway edge (LT) uses W lamp (blue), taxiway intersection (LE) uses W lamp (yellow), and taxiway intersection (LF) uses W lamp (yellow). Ordering Code Fixture Color Lamp Wattage* -ZAA -ZAA G: Green Y: Yellow R: Red B: Blue W: White : W,.A (LT, E) : W,.A (LF) * Also available in voltage powered, please contact us. Lamp bypass options available if required. Installation and maintenance manual AVD. Suitable for direct installation onto FAA L-B base can with -AA mounting adapter or onto " diameter base. Commonality of parts with the ZA RWCL-TDZ and the ZA TWCL fixture. " style: net weight. lb. (kg), gross weight. lb. (.kg). Carton size:. cu. ft. (. cu. meters); " (d) x " (w) x " (h) (mm (w) x mm (d) x mm (h)) Anodized finish fixtures (." B.C.): Order with - AA adapter ring if mounting on LB base, sold separately. Golden yellow finish fixtures (" B.C.): Order with - adapter ring if mounting on LB base, sold separately (golden yellow fixtures restricted to existing customers and replacements). Page of

2 ZA OMNI-DIRECTIONAL GENERAL ARRANGEMENT ZA INSTALLED ON FAA L-B BASE " dia.." dia.." bolt circle."." " holes." dia. on." bolt circle Grade ". ZA fixture. " mounting adapter. FAA L-B base (one piece). Outer earth terminal (optional). Inner earth terminal (optional).".". Isolating transformer. Secondary connection. Primary connection. Grommet Mounting Configurations L-B "-" Adapter/Flange Ring Anodized fixture (." B.C.): -AA Golden yellow fixture (" B.C.): -."." Page of

3 Common Replacement Parts Body Casting (Std) Bottom Cover Casting - Elkay Gland Set -// Bottom Cover Gasket - Prism Clamp - Bottom Cover Spinning Clamp - Prism Clamp Gasket - Prism Gasket - Blue Prism Dome - ALT White (Clear) Prism Dome - ALT Green Prism Dome - ALT Yellow Prism Dome - ALT Red Prism Dome - W.A Reflector Lamp LA- ALT W.A Reflector Lamp LA- ALT W /V Reflector Lamp LA- Lamp Gasket - Lamp Retaining Spring - B-Type Male Lead TRC---DO Pressure Test Plug - ALT Schrader Tank Valve - V/V lamp holder - Page of

4 ZA Taxiway Intersection Yellow performance ( watts) (FAA L- F) Minimum average specification Yellow performance ( watts) (FAA L- E) Minimum average specification ZA Taxiway Edge Blue performance ( watts) (CAP) Minimum average specification (FAA) Minimum Average specification (STANNAG) Minimum sverage specification ZA Heli-pad ZA Taxiway Edge (Stannag) White performance ( watts) Final approach and take off perimeter specification Yellow performance ( watts) Touchdown and lift off and aiming point specification Yellow performance ( watts) Yellow specification Green performance ( watts) Green specification Red performance ( watts) Red specification Page of

5 L- to " Split Ring Adapter (---) L- to " Split Ring Adapter (P/N ---) Page of

6 L-B "-" Adapter/Flange Ring (-AA). Approved and Certified to FAA Advisory Circular AC/-F Size: B=". Adapter Plates are galvanized to ASTM-A/ AM-. () /" equally spaced, thru holes with -/" x /" deep counter bore. Standard Plate: () /"- tapped holes Metric Plate: () M-. tapped holes. Standard Adapter Plates are shipped with: () /"- x -/" SS hex head bolts () () /", piece locking washers () () Bolt Set () containing: () /"- x " SS hex head bolts () () /", piece locking washers () Metric Adapter Plates are shipped with: () Mx.xmm SS hex head bolts () () /", piece locking washers () () Bolt Set (M) containing: () Mx.xmm SS hex head bolts () () /", piece locking washers () TYPE OD BC OD ID BC ID -AA." [.]." [.]." [.]." [.]." [.]." [.] Add M to the end of the part number to note Metric Adapter Plate [ ] = metric dimensions in mm Page of