CATALOG TOOL STEEL ELECTRIC

Size: px

Start display at page:

Download "CATALOG TOOL STEEL ELECTRIC"

Abel Lucas
6 years ago
Views:

1 CATALOG TOOL STEEL ELECTRIC 1/26

2 BENDING MACHINES Biegeboy bending machine For bending panels with turned-up edges up to a turn-up height of 50mm. Very small radii are produced in several passes. 40 cm 17 cm 12 kg RBM25 round arch shaping machine For the production of curved profiled panels, for applications such as dormers, round arches, cupolas, barrel roofs etc. with variable radii starting from 300 mm, depending on the material. Equipped with infinitely variable speed control between 0 and 12 m/min, making it possible to produce even changing radii with no difficulty. The infinitely variable width adjustment between 300 and 800 mm is matched to the production possibilities of the EPM, Mini-Prof, SPM 30/80 und QUADRO series. The RBM can also be used for other profile heights between 25 and 40 mm by exchanging the pressure rollers. Adjustment range: minimum radii : Material thicknesses: Operating speed: Axial dimension mm NF-metals from 300 mm radius Sheet steel from 1,500 mm radius Edelstahl ab Radius mm NF-metals up to 0.8 mm Sheet steel up to 0.7 mm Stainless steel up to 0.5 mm 0-12 m/min infinitely variable 1000 mm 1000 mm 2/26

3 1200 mm 230 kg 230 volts, single ph., 0.55 kw RBM50 3/26

Koni 2000 oblique cutting system For perfect, rapid and simple cutting of parallel, oblique or trapezoidal sheets from the coil or from blanks, up to a thickness of 0.80 mm.

4 Koni 2000 oblique cutting system For perfect, rapid and simple cutting of parallel, oblique or trapezoidal sheets from the coil or from blanks, up to a thickness of 0.80 mm. An operator-friendly programmable control system calculates the set position of the special cutting head and of the cross-cutting shears. As the material is fed in the cutting head moves in accordance with the preset angle. A roller cutter for trimming the material makes handling easy and flexible. The inlet width adjustment is infinitely variable up to 1,250 mm. Additional components for cutting and cleaving systems: AH1250A1 Uncoiling reel up to 1 tonne, on wheels, internal chucking AH1250K5A1 Uncoiling reel up to 5 tonnes, internal chucking Strip intake widths: Material thicknesses: Dimensions: Forward feed speed: from 300 mm to 1250 mm NF-metals mm Sheet steel mm Stainless steel mm L x W x H 1860 x 2100 x 1300 mm approx. 700 kg 10 m/min. 1.1 kw, 400 volts, 3-ph., 4/26

5 MSS 1250 cleaving system Longitudinal cut and cut-to-length system for wide strip up to 1,250 mm in width and with a maximum thickness of 1.25 mm. Equipped with 4 pairs of roller cutters, electric cross-cutting disc shears with automatic cut and adjustable end point, special control system for single and continuous operation. The following optional extras are available: Expansion up to 10 pairs of blades, depending on the thickness of the material. 3-roller straightening system Cross-cutting with motorised squaring shears, automatic cut AH1250A1 AH 1250K5 Strip intake widths: from 300 mm to 1250 mm Material thicknesses: steel up to 1.25 mm (400 N/mm 2 Dimensions: Forward feed speed: L x W x H 1550 x 2420 x 1350 mm approx kg max. 22 m/min. controllable 230 volts, single-ph., 1.1 kw braking motor for cleaving, 0.75 kw braking motor for cross-cutting 5/26

6 Electro-hydraulic coping unit EHA For preparing profiled panels for installation. For the top and bottom ends of seams on roofs, façades and breastwork with different focal points such as break points at the eaves and on the roof, channels, monopitch roofs, façade bases, faceplates, verge flashing, window lintels. Parallel, tapered and oblique possible Sequence of operations: Coping Advancing Folding back The machine is equipped with a segmented rail in the top clamping bar, bending cheek and supporting table. As a result, edging work is also possible, e.g. on tiles, for transom covering and cassettes. Infinitely variable width adjustment between 300 and 800 mm; the length and angle of the folded edge (internal and external) are adjustable. Adjustment range: mm Coping depth: 0-80 mm, variable Length of folded edge: mm Angle of fold: mm 1500 mm 1200 mm Intake height: Infinitely adjustable between mm 590 kg 1.1 kw, 400 volts, 3-ph., 6/26

strip profiles between 40 and 60 mm in height can be produced in two passes.

7 Edging machine DSM 1000N Edging machine for parallel panels, both edges of which can be turned up in one operation. Edge turn-up height infinitely adjustable between mm and intake width from 350 to 1,0000 mm Special versions DSM cover strip In addition to the possibilities offered by the DSM 1000N, cover strip profiles between 40 and 60 mm in height can be produced in two passes. DSM1250E This machine is used for turning up the edges of stainless steel sheets of up to 1,250 mm intake width, the turn-up rollers being made of stainless steel. DSM4 with 4 roller units for more delicate shaping Material thickness: Intake width: Turn-up heights: Operating speed: NF-metals up to 0.8 mm Sheet steel up to 0.7 mm; Stainless steel up to 0.5 mm 350-1,000 mm mm approx. 11 m / min 1270 mm 960 mm 420 mm 90 kg 230 volts, single-ph., 0.37 KW 7/26

PROFILING MACHINES Profiling machine EPM 25 The Schlebach EPM 25 is the ideal profiling machine for panels that are short, tapered or converge to a point.

8 PROFILING MACHINES Profiling machine EPM 25 The Schlebach EPM 25 is the ideal profiling machine for panels that are short, tapered or converge to a point. The panels are quickly produced in two passes by means of one-sided profiling, and without any width adjustment. Its light weight and the use of detachable handles make it easy to move and quick to deploy. Working height: Forward feed: 950 mm 600 mm 1070 mm 870 mm 1.1 kw, 230 V, single-ph., 50 Hz 11 m/min. 145 kg 8/26

Mini-Prof profiling machine The small, handy, alternative for entry-level profiling technology. Or the second machine for the professional. Infinitely variable width adjustment, between 230-850 mm.

9 Mini-Prof profiling machine The small, handy, alternative for entry-level profiling technology. Or the second machine for the professional. Infinitely variable width adjustment, between mm. Parallel panels are profiled in one pass. Angled, fitting and tapered panels are produced in a single pass. Minimum axial dimension 50 mm for a single pass. The Mini-Prof is height-adjustable and portable. Material thicknesses: Width adjustment: Intake height: NF-metals up to 0.8 mm Steel up to 0.7 mm Stainless steel up to 0.5 mm thick mm in the intake / mm axial dimension 1200 mm with intake guides / 900 mm with stops folded down 1300 mm Infinitely adjustable between mm Infinitely adjustable between mm approx. 220 kg 1.1 kw, 400 volt, 3-ph., or alternatively 230 volt, single-ph 9/26

Mini-Prof-Plus Compact version based on the Mini-Prof profiling unit, with the following standard equipment: Electro-mechanical length measurement in units of 1 cm Disc shears for cross-cutting

10 Mini-Prof-Plus Compact version based on the Mini-Prof profiling unit, with the following standard equipment: Electro-mechanical length measurement in units of 1 cm Disc shears for cross-cutting before profiling, with material intake feed Disc shears for longitudinal cutting before profiling, for fitting sheets. AC uncoiler for max. load of 300 kg Material thicknesses: Width adjustment: Intake height: NF-metals up to 0.8 mm Steel up to 0.7 mm Stainless steel up to 0.5 mm thick mm in the intake / mm axial dimension 1600 mm 1300 mm Infinitely adjustable between mm Infinitely adjustable between mm approx. 315 kg 1.1 kw, 400 volt, 3-ph., or alternatively 230 volt, single-ph 10/26

11 QUADRO profiling machine The smart, versatile profiling system for Double standing seam profile SNAP LOCK seam profile NAIL STRIP profile Seam profile U-profile Plug-in seam profile Minimal conversion times are achieved by means of pivoting rails. Equipped with a special control system and electrically operated cross-cutting disc shears, the Quadro automatically processes pre-selected lengths and quantities. Equipment: Cross-cutting, automatic with electrically operated disc shears Special control system for a maximum of 3,000 different lengths and quantities. Single or continuous operation Fitted with pivoting cassettes, with profile rollers arranged on both sides The components fitted are determined by the customer. Various profiles with one machine Expandable at any time by means of interchangeable cassettes Material thicknesses: Width adjustment: Profiling speed: NF metals mm or mm sheet steel mm stainless steel mm mm infinitely variable in the intake 3,120 mm 1,720 mm 1,200 mm approx. 14 m / min. approx. 1,260 kg (varies according to components fitted) 2.2 KW, 50 Hz., 400 volts, 3-phase 11/26

Electronic length measurement device, in units of 1 mm Hydraulic drive with smooth intake and runout Hydraulic cutting device for angular

12 SPA automatic profiling machine This compact system based on the basic SPM machine is supplied equipped as follows: Dialog control for 10 different lengths and quantities, with set-up mode, for single and continuous operation. Electronic length measurement device, in units of 1 mm Hydraulic drive with smooth intake and runout Hydraulic cutting device for angular cross-cutting after profiling, with HSS - segmented blade system. Cut is made automatically on reaching the length. Operating speed: 1550 mm 1500 mm 1100 mm approx. 390 kg 11 m / min 1.1 kw, 400 volts, 3-ph., 12/26

SPM 30/80 profiling machine The SPM 30/80 profiling machine is designed as a modular unit and as the basic machine for many different versions. Infinitely adjustable intake width, 290-880 mm.

13 SPM 30/80 profiling machine The SPM 30/80 profiling machine is designed as a modular unit and as the basic machine for many different versions. Infinitely adjustable intake width, mm. Can be used for onesided passes for angled, fitting and tapered converging panels above 50 mm axial dimension. The standard profile height is 25 mm. Various extension modules are available, which can also be subsequently retrofitted. Special versions: 32 mm profile height = SPM mm inlet width = SPM 30/100 Material thicknesses: Width adjustment: Intake height: NF metals up to 0.8mm steel up to 0.7mm stainless steel up to 0.5mm thick NF metals 0.9 and 1.0 mm possible by changing the profile gap mm in the intake / mm axial dimension 1150 mm 1550 mm ready for operation 1150 mm 890 mm 350 kg 1.1 kw,400 volts, 3-ph. or alternatively 230 volts, single-ph. 13/26

SPM 30/80-LM-HYT profiling machine The SPM 30/80 serves as a basic machine with the following components: LM - electronic length measurement in units of 1 mm and two-speed drive for slow intake and

14 SPM 30/80-LM-HYT profiling machine The SPM 30/80 serves as a basic machine with the following components: LM - electronic length measurement in units of 1 mm and two-speed drive for slow intake and runout. HYT Hydraulic HSS - segmented blade cutting device with automatic separation cut, suitable for all metals. With hardened profile guides for burr and distortion-free angled cuts. These are automatically moved into position when setting the width on the profiling machine. The cutting bars can be used on four sides, cutting blades can be reground. Automatically activated dripfeed lubrication prevents the build-up of material on the cutters. Material thicknesses: Width adjustment: Intake height: NF metals up to 0.8mm steel up to 0.7mm stainless steel up to 0.5mm thick NF metals 0.9 and 1.0 mm possible by changing the profile gap mm in the intake / mm axial dimension 1800 mm without uncoiler/unspooler 1500 mm ready for operation 1200 mm 890 mm 660 kg 0.37/1.5 kw, 400 volts, 3-ph 14/26

SPM 30/80-LM-QA 45 profiling machine TheSPM 30/80 serves as the basic machine with the following additional modules: LM - electronic length measurement in units of 1 mm and two-speed drive for slow

15 SPM 30/80-LM-QA 45 profiling machine TheSPM 30/80 serves as the basic machine with the following additional modules: LM - electronic length measurement in units of 1 mm and two-speed drive for slow intake and runout. QA45 - Cut-to-length device for manual cross-cutting after profiling, with a circular saw and a special saw blade, adjustable up to 45 to either side Material thicknesses: Width adjustment: Intake height: NF metals up to 0.8mm, steel up to 0.7mm, stainless steel up to 0.5mm thick NF metals 0.9 and 1.0 mm possible by changing the profile gap mm in the intake / mm axial dimension 2900 mm without uncoiler/unspooler 1850 mm ready for operation 1100 mm 890 mm 480 kg 0.37/1.5 KW, 400 volts, 3-ph. 15/26

SPM 30/80-RS profiling machine Based on the SPM 30/80, equipped with the following additional modules: EL - electro-mechanical length measurement in units of 1 cm RS - Disc shears for cross-cutting

16 SPM 30/80-RS profiling machine Based on the SPM 30/80, equipped with the following additional modules: EL - electro-mechanical length measurement in units of 1 cm RS - Disc shears for cross-cutting with roller cutter before profiling with a material feed unit With additional modular unit: SPM 30/80-RS-LS profiling machine LS - Disc shears for longitudinal cutting before profiling Material thicknesses: Width adjustment: Intake height: NF metals up to 0.8mm steel up to 0.7mm stainless steel up to 0.5mm thick NF metals 0.9 and 1.0 mm possible by changing the profile gap mm in the intake / mm axial dimension 1850 mm without uncoiler/unspooler 1550 mm ready for operation 1150 mm 890 mm 450 kg 1.1 kw,400 volts, 3-ph. or alternatively 230 volts, single-ph. 16/26

ROLLER FORMER Profiling machine MULTIPRO The MULTIPRO is equipped as standard with: 16 profiling stations Material intake adjustable from 300 800 mm Electrically operated material intake Automatic

17 ROLLER FORMER Profiling machine MULTIPRO The MULTIPRO is equipped as standard with: 16 profiling stations Material intake adjustable from mm Electrically operated material intake Automatic cross-cutting with electrically operated disc shears Slow startup and runout of materials for gentle intake of materials and precise length Setting of the profile edges by means of individually adjustable intake guides Operator-friendly positioning control, with 96 programs for length and quantity, with single and continuous modes With interchangeable cassettes for different profile shapes. Material thicknesses: Cassette weight: mm coated sheet steel mm stainless steel mm NF metal for soffit panels 5800 mm 2000 mm 1930 mm approx. 5,100 kg without cassette 1,200 1,400 kg (depending on the components fitted) 400 volts, 50 Hz. 5.5 KW 17/26

18 Panel roller former Standard for the manufacture of plug-in seam panels. Plug-in seam panelling is a good option for façade cladding and even in the interior on walls and ceilings, in order to create valuable and lasting protection for the building. The profile permits numerous variations in terms of design and installation. The joints can be set to any width between 2-30 mm, and the panel width can be anything from mm. There are various machine solutions available for the manufacture of profiles Available options: Cutting device with saw and special saw blade for NF metals Hydraulic cutting device with HSS segmented blade system Coping tools for separation cut and end bases Uncoiling reel, various models Dialogue and SPS control Complete unit as production line Strip intake widths: Material thicknesses: Forward feed speed: from mm NF metals: mm sheet steel: mm 4300 mm 1500 mm 1200 mm approx kg 12 m/min. 0.3 kw, 230 volts, single-ph. 18/26

Roller former QuadFlex On the basis of the successful developments to the Quadro profiling system, the QuadFlex was developed as a flexible profiling unit for various profiles.

19 Roller former QuadFlex On the basis of the successful developments to the Quadro profiling system, the QuadFlex was developed as a flexible profiling unit for various profiles. The machine is extremely sturdily constructed, and equipped with pivoting and interchangeable cassettes. The 14 profiling stations can also be used to produce complex profiles. A special control system and electrically operated cross-cutting enable a fully automated process. The following profiles have so far been created for the QuadFlex according to customer requirements: Width adjustment: Material thicknesses: Forward feed speed: from mm up to 0.8 mm, in the case of plug-in seams up to 1.00 mm depending on the cassette(s) fitted approx. 20 m/min 19/26

20 Flitzer folding machine Folding machine for folding square-lock and double standing seams, each in one operation, with straight profiled panels. L/W/H: Output: 370 mm / 250 mm / 280 mm approx. 15 kg 0.3 kw, 230 volts, single-ph. approx. 11 m / min 20/26

When using profiled panels the folding cycle is concluded in one operation.

21 Seam folding machine FK1 Double standing seam machine for folding double seams and sheets with turned-up edges. Two folding processes are required. When using profiled panels the folding cycle is concluded in one operation. Seam height: Sheet thickness: Infinitely adjustable between mm NF-metal up to 0.8 mm Sheet steel up to 0.8 mm Stainless steel sheet up to 0.5 mm 450 mm 300 mm 440 mm 37 kg 21/26

Piccolo folding machine Universal folding machine for folding square-lock and double standing seams, each in one operation, with straight and curved profiled panels with a radius of more than 600 mm.

22 Piccolo folding machine Universal folding machine for folding square-lock and double standing seams, each in one operation, with straight and curved profiled panels with a radius of more than 600 mm. Einstellbar für Falzhöhe 25 und 38 mm. Additional components: Cutting rollers for cutting off seamed strips Special roller set for stainless steel sheets L/W/H: Output: 450 mm / 310 mm / 230 mm approx. 23 kg 0.3 kw, 230 volts, single-ph. approx. 9 m / min 22/26

AG bending device The sliding attachment press is supplemented by the

The pre-manufactured segments are fed into this machine by hand and

devices for the manufacture of hook-in attachments (upper sections for

23 AG bending device The sliding attachment press is supplemented by the bending device. The pre-manufactured segments are fed into this machine by hand and bent up EHS-Phook-in press Hook-in press, made up of 2 hand-operated devices for the manufacture of hook-in attachments (upper sections for sliding attachment), matched with the folded profile, for either 25, 32 or 38 mm profile height, made of 29 mm metal strips. 23/26

24 Fixed attachment press FHS Electro-hydraulic combination press FSE For the efficient production of fixed, sliding and hook-in attachments from strips of material. 24/26

25 Options: Processing station with automatic belt feed and automatic production sequence, with preset quantity. Sliding attachments optionally available in a special version with 60 or 70 mm slot width L/W/H: 1550 mm / 700 mm / 1200 mm 280 kg 0.3 kw, 230 volts, single-ph. Automatic feed: L/W/H: 1350 mm / 900 mm / 930 mm 115 kg HS Two-legged attachment press This hand-operated device is used for the manufacture of two-legged attachments from 39 mm metal strips, which are needed for the installation of panels with turned-up edges. Attachment height 75 mm 25/26

Sliding attachment press SHM Sliding attachment press, motorised device for the manufacture of lower sections of sliding attachments,

26 LHS Horizontal attachment press This hand-operated device is used for the manufacture of horizontal attachments. 39 mm metal strips are fed into this device, and then hole-punching, bending and cutting to length are carried out in one operation. Sliding attachment press SHM Sliding attachment press, motorised device for the manufacture of lower sections of sliding attachments, with a choice of 50 mm, 60 mm or 70 mm slots, made of metal strip 39 mm wide. Bending is carried out in a separate operation, us the AG bending device. 26/26

Profile technology for the roofs of the world.

Profile technology for all the roofs of the world Profile technology for the roofs of the world. CONTENTS More than 30 years of experience. The company 2 Cut-to-length line QTAR 125 4 Slitting machine