18V 35V 65V 40A 60A 1.5W 1.2W ms 40ms. 20ms 20ms
|
|
- Bertha Nichols
- 6 years ago
- Views:
Transcription
1 Features DIN Rail Description Universal AC Input (85264VAC) Protections: SCP, OVP, OLP, OTP DC OK Indicator LED with Relay Contacts 5% (8W) peak load capacity Builtin active PFC,PF>,95 High effciency up to 92.5% These DINrail mounted power supplies have a robust case, 4mm screw terminal connectors and use high reliability components to give a long, troublefree life. The REDIN2 can be end mounted to save rail space or side mounted for use in lowprofile cabinets. The units can deliver up to 5% startup power and allow n parallel operation to increase the continuous output current or for supply redundancy. Relay contacts simplify DC OK monitoring. The REDIN2 series is designed for demanding commercial and industrial applications with UL58, UL695, IEC695 CB report and CE (LVD EMC RoHS) certifications. They come with a full 5year warranty. Selection Guide Part nom. Input Output Output Rated Efficiency Number Voltage Range Voltage Adjustability Current typ. 23VAC full load [VAC] [VDC] [VDC] [A] [%] REDIN REDIN REDIN BASIC CHARACTERISTICS Parameter Condition Min. Typ. Max. Input Voltage Range 85VAC 264VAC Absolute Maximum Input Voltage Input Current Return Voltage Immunity Inrush Current No Load Power Consumption max. 3s, full load 23VAC, full load 2Vout 24Vout 48Vout, cold start 23VAC, cold start 23VAC 8V 35V 65V 4A 6A.5W.2W 3VAC 375VDC.5A.65A Input Frequency Range 47Hz 63Hz Output Voltage Trimming 6.67% Power Factor Startup time Holdup time Ripple and Noise () 23VAC, full load 23VAC, full load, full load 23VAC, full load 7 C 25 C 7 C 25 C 2Vout 24Vout 2ms 2ms ms 4ms 3W 3W 5ms 25ms mvpp 2mVpp 2mVpp 24mVpp 25 C 7 C 48Vout 24mVpp Notes: Note: Measured at 2MHz bandwidth by using a 2 twisted pairwire terminated with a.µf & µf parallel capacitor. AC/DC Converter REDIN2 2 Watt DINRail Power Supply E UL695 Certified UL58 Certified IEC/EN695 Certified 5 5 YEAR w a r r a n t y REV.: /26 PDR
2 REDIN2 REDIN22 Efficiency [%] Input Current [A] REDIN224 Efficiency [%] Efficiency vs. Load 2 4 Input Current vs Load VAC 264VAC 6 8 Iin [A] Iin 23VAC [A] Efficiency vs. Load VAC 264VAC Dissipated Power [W] Dissipated Power [W] Power Factor [%] Power Dissipation vs Load 2 4 Power Factor vs Load over Vin Power Dissipation vs Load 23VAC VAC VAC Input Current vs Load.9 Power Factor vs Load over Vin Input Current [A] Iin [A] Iin 23VAC [A] 4 5 Power Factor [%] VAC PDR2 REV.: /26
3 REDIN2 REDIN248 Efficiency [%] Efficiency vs. Load 2 23VAC 264VAC Dissipated Power [W] Power Dissipation vs Load VAC Input Current [A] Input Current vs Load.5.5 Iin [A] Iin 23VAC [A] Power Factor [%] Power Factor vs Load over Vin 23VAC REGULATION Parameter Condition Value Output Accuracy ±.25% typ. / ±% max. Line Regulation ±.% typ. / ±.5% max. Load Regulation % to % load ±.25% typ. / ±.% max. Transient Response Hz & khz, 5% duty ±% typ. / ± 5% max. PROTECTION Parameter Condition Value Input Fuse internal T5A, slow blow type Short Circuit Protection (SCP) Over Voltage Protection (OVP) Over Voltage Category (OVC) Over Load Protection (OLP) Over Temperature Protection (OTP) Power OK LED 2Vout 24Vout 48Vout ON (green) OFF (red) Relay Contact Rating Hiccup Mode (current limit) 58VDC, Hiccup Mode 2933VDC, Hiccup Mode 5865VDC, Hiccup Mode OVC II Constant power (current limit) ±5 C, detect on Heatsink of power transistor; shut down O/P, auto recovery after temperature goes down Vout up to 9% of rated Vout Vout down to 8% of rated Vout Max. 3V/A or 6V/.3 or 3VAC/.3A Resitive Load REV.: /26 PDR3
4 REDIN2 Isolation Voltage Isolation Resistance Leakage Current I/P to O/P I/P to PE O/P to PE I/P to O/P I/P to PE, 24VAC 5Hz 3.kVAC / minute 2.5kVAC / minute.5kvac / minute MW min..ma typ. /.25mA max..ma max. Overload Capability Pout [%] y Time (x) [s] Pout (y) [%] x 6 Time [s] ENVIRONMENTAL Parameter Condition Value Operating Temperature Range with derating 25 C to 7 C Temperature Coefficient ±.3%/ C Operating Altitude 3m Operating Humidity noncondensing 2% 9% RH IP Rating IP2 Pollution Degree (PD) PD2 Shock 5Hz 2G, 6min. Vibration G /ms, along x,y and z axis MTBF MILHDBK27F, full load, 25 C 3 x ³ hours Derating Graph Output Power [%] Pout cont. Pout 23VAC cont Ambient Temperature [ C] PDR4 REV.: /26
5 REDIN2 SAFETY AND CERTIFICATIONS Certificate Type Report / File Number Standard Information Technology Equipment, General Requirements for Safety Industrial Control Equipment Information Technology Equipment General Requirments for Safety EMC Compliance Report / Condition Standard / Criterion Information technology equipment Radio disturbance characteristics Limits and methods of measurement Information technology equipment Immunity characteristics Limits and methods of measurement Limitations on the amount of electromagnetic intererence allowed from digital and electronic devices Methods of Measurement of RadioNoise Emissions from LowVoltage Electrical and Electronic Equipment in the Range of 9 khz to 4 GHz EN5522, Class B, 2 EN5524, Class B, 2 47 CFR FCC Part 5, Subpart B: 24 ANSI C63.4: 24 ESD Electrostatic discharge immunity test Air ±8kV, Contact ±4kV EN642, Criteria B, 29 Radiated, radiofrequency, electromagnetic field immunity test 3V/m EN643, Criteria A, 26 Fast Transient and Burst Immunity AC Power Port: LNPE ±kv EN644, Criteria B, 22 Surge Immunity AC Power Port LN ±kv, LPE NPE ±2kV EN645, Criteria B, 24 Immunity to conducted disturbances, induced by radiofrequency fields AC Power Port 3V EN646, Criteria A, 24 Power Magnetic Field Immunity 5Hz, A/m EN648, Criteria A, 2 Voltage Dips and Interruptions E E4772 SA586S SA586S 2 Voltage Dips >95% Voltage Dips 3% Voltage Interruptions >95% UL695, 2nd Edition, 24 CSA C22.2 No. 6957, 2nd Edition, 24 UL58, 7th Edition, 23 CSA C22.2 No. 7., 3rd Edition, 2 IEC695, 2nd Edition 25, AM:29 AM2:23 EN695:26, A:29 A:2 A2:2 A2:23 EN64, Criteria B, 24 EN64, Criteria C, 24 EN64, Criteria C, 24 Limits of Harmonic Current Emissions EN632, Criteria A, 24 Voltage Fluctuations & Flicker EN633, Clause 5: 23 DIMENSION and PHYSICAL CHARACTERISTICS Parameter Type Value Material Case Cover Aluminium Nickel plated steel Package Dimension (LxWxH) without mounting clip 4.5 x 33. x 24.4mm Package Weight 59g typ. REV.: /26 PDR5
6 REDIN2 Dimension Drawing (mm) DC OK V V N L PE Type Terminals and Wiring Screw Connector Solid Wire 2.56mm Stranded Wire 2.54mm 2 American Wire Gauge (AWG) Wire Stripping Length Screwdriver (slotted / cross) AWG6 8mm 3.5mm Recommended tightening torque.5nm.8nm Tolerance: X.X ±.5mm X.XX ±.25mm PDR6 REV.: /26
7 REDIN2 INSTALLATION and APPLICATION Mounting Instruction Mounting Releasing Click 2 2 Mounting Multiple Power Supplies 5mm 5mm leave 5mm gap between supplies 5mm Minimum Abstand REV.: /26 PDR7
8 REDIN2 Parallel Operation L L2 L3 N PE L N PE V V DC OK V V DC OK Load V V DC OK DC OK Single Operation: ) Make sure that the front panel switch is set to single Use. 2) The output voltage can be increased by trim pot to compensate any cable losses. Parallel Operation: ) Make sure that the front panel switch is set to single Use on each power supply. 2) Adjust each power supply to the exact same output voltage with same load and cooling conditions. 3) Set the front panel switches to. Use the same wire length for each power supply (star connection) and energize all units at the same time to avoid triggering overload protection. Application Circuit Derate the maximum output power to 9% of nominal ratings. For operation with more than three power supplies in parallel or series operation, please contact RECOM technical support for advice. L N T5A Input Filter Power Stage Output Filter V V E OTP Shut Down Protection Relay LED DC OK OCP Limit OVP Shut Down Output Voltage Regulation Single / Parallel PACKAGKING INFORMATION Parameter Type Value Packaging Dimension (LxWxH) cardboard box 4. x 5. x 42.mm Packaging Quantity cardboard box pcs. Storage Temperature Range Storage Humidity 4 C to 85 C 5% 95% RH The product information and specifications are subject to change without prior notice. RECOM products are not authorized for use in safetycritical applications (such as life support) without RECOM s explicit written consent. A safetycritical application is defined as an application where a failure of a RECOM product may reasonably be expected to endanger or cause loss of life, inflict bodily harm or damage property. The buyer shall indemnify and hold harmless RECOM, its affiliated companies and its representatives against any damage claims in connection with the unauthorized use of RECOM products in such safetycritical applications. PDR8 REV.: /26
18V 35V 65V 40A 60A 1.5W 1.2W ms 40ms. 20ms 20ms. 100mVp-p 200mVp-p 120mVp-p 240mVp-p -25 C - 70 C 48Vout 240mVp-p
Features DIN Rail Universal AC Input (85) Protections: SCP, OVP, OLP, OTP DC OK Indicator LED with Relay Contacts 15% (18W) peak load capacity Builtin active PFC,PF>,95 High effciency up to 9.5% AC/DC
More information4.59A 2.36A 6.8A 13A 3.85W 2.85W ms 21ms. 31ms 100ms 48Vout 49ms 100ms. 240mVp-p 480mVp-p C 48Vout 480mVp-p
Features DI Rail Description Universal AC Input (85264VAC) Protections: SCP, OVP, OP, OTP DC OK Indicator ED with Relay Contacts 15% (72W) peak load capacity Builtin active PFC, PF>.95 High effciency up
More informationNotes: Note1: Efficiency is tested at nominal input and full load at +25 C ambient. Output Voltage 400VAC 400VAC
Features DIN-Rail Description 2 and 3-phase operation Input voltage range: 320 575VAC Output trim range: 22.5 29.5VDC High electrical strength; high reliability Permanent overload and short-circuit protection
More informationNotes: Note1: Efficiency is tested at nominal input and full load at +25 C ambient. Output Voltage 400VAC 320VAC 360VAC 400VAC 400VAC
Features DIN-Rail 2 and 3-phase operation Input voltage range: 320 575VAC Output trim range: 22.5 29.5VDC High electrical strength; high reliability Permanent overload and short-circuit protection Parallel
More informationFeatures. Regulated Converter RAC05- SK/C14. RAC 5 Watt Single Output RAC05-3.3SK/C14. AC/DC Converter
Features Regulated Converter Unique, patent-pending design Isolated power supply with integrated mains filter Packaged inside of line filter case Safe, touchable DC outputs Easy installation Worldwide
More informationFeatures. Regulated Converters. RAC05-K 5 Watt 1 x 1 Single Output RAC05- SK. AC/DC Converter
Features Regulated Converters 5W Class II Power Supply in Compact 1 x 1 Package (High Power Density) Internal EMC Class B Filter UL/IEC/EN695-1 certified UL/IEC/EN62368-1 certified Electrical Protection
More informationIEC/EN/UL60950 & CE certified, EN55032 Class B
Features Regulated Converter Universal input VAC 3W PCB mount package
More informationEfficiency [%] 115VAC 230VAC. Parameter Condition Value. Line Regulation low line to high line ±0.5% max. Load Regulation 10% to 100% load ±0.5% max.
Features Regulated Converter Universal Input VAC 3W PCB Mount Package
More informationNote1: Efficiency is tested at nominal input and full load at +25 C ambient Note2: Max Cap Load is tested at nominal input and full resisitive load
Features Regulated Converter Description 4mW max. no load power consumption High efficiency up to 76% Isolated output 3kVAC / 1 min SCP, OVP protection Wide operating temperature range: -4 C to +85 C Universal
More informationParameter Condition Min. Typ. Max. Internal Input Filter 115VAC 230VAC 115VAC 230VAC. No load Power Consumption
Features Regulated Converter Universal input VAC 3W PCB mount package
More informationFeatures. Regulated Converter. RAC02-SE/277/W 2 Watt Single Output. RAC02- SE/277/W Wired. AC/DC Converter
Features Regulated Converter Description 35mW max. no load power consumption Efficiency up to 76% Isolated output 3kVAC / 1 minute SCP, OVP protection Wide operating temperature range: -4 C to +85 C Universal
More informationParameter Condition Min. Typ. Max. Internal Input Filter. refer to line derating graph on PA-4 115VAC 230VAC 115VAC 230VAC. No load Power Consumption
Features Regulated Converter Universal input 85-35VAC 3W PCB mount package
More informationFeatures. Regulated Converter. RAC05-K 5 Watt 1 x 1. Single Output RAC05- SK. AC/DC Converter
Features Regulated Converter Description 5W Class II power supply in compact 1 x 1 Package (high power density) Internal EMC class B filter UL/IEC/EN695-1 certified UL/IEC/EN62368-1 certified Electrical
More informationFeatures. Regulated Converter. RAC05-K/277 5 Watt Single Output RAC05- SK/277/W. AC/DC Converter
Features Regulated Converter Description Wide input range 85-5VAC Standby mode optimized (eco design Lot 6) High efficiency over the entire load range Operating temperature range: - C to + C Overvoltage
More informationFeatures. Regulated Converter. RAC10-K/ Watt 2 x 1 Single and Dual Output RAC10- K/277. AC/DC Converter
Features Regulated Converter Description Wide input range 85-35Vac Full load temperature range: -4 C to +65 C Ultra-high efficiency over entire load range No external components necessary International
More informationFeatures. Regulated Converters. RACM Watt Enclosed Case Style Single Output. RACM150- S/ _ Fan Option (1) Single. AC/DC Converter.
Features Regulated Converters Description Long 5 Year Warranty 2MOPP/250VAC Suitable for built in Class II Applications Wide Input Voltage Range (85-264VAC) Low Leakage Current (
More informationFeatures. Regulated Converters. RAC01-C RAC02-C 1-2 Watt Single Output RAC0_- C. AC/DC Converter
Features Regulated Converters Description Compact low profile AC-DC power supply mw no load power consumption Class II power supply with kvac isolation Universal input voltage range (~VAC) Low output ripple/noise
More informationFeatures. Regulated Converter. RAC04-C/277 4 Watt Single and Dual Output RAC04- C/277 -_. AC/DC Converter
Features Regulated Converter Description mw max. no load power consumption High efficiency up to 79% Isolated Output 3.75kVAC / 1 minute SCP, OVP protection Wide operating temperature range: -4 C to +
More informationFeatures. Regulated Converter. RAC02-SE/277 2 Watt Single Output RAC02- SE/277. AC/DC Converter
Features Regulated Converter Description 5mW max. no load power consumption Efficiency up to 76% Isolated output kvac / min SCP, OVP protection Wide operating temperature range: -4 C to +85 C Universal
More informationFeatures. Regulated Converter RAC Watt Single Output. AC/DC Converter
Features Regulated Converter Description Wide input range 8-64VAC Standby mode optimized PSU (ENER Lot 6) Ultra-high efficiency over entire load range Operating temperature range: -4 C to +8 C Class II
More informationNote1: Max Cap Load is tested at minimum input and full resistive load. Connections (3) Case Style (1)
Features Regulated Converter Long 5 year warranty 2MOPP/2VAC Suitable for built in Class II applications Wide input voltage range (85-264VAC) Low leakage current (
More informationFeatures. LED Driver RACT Watt. TRIAC Dimmable. Single Output RACT AC/DC Converter
Features TRIAC Dimmable LED Driver Triac dimmable with leading or trailing edge dimmers Class II with SELV output (no earth required) Extra-large screw terminals and integrated cable clamps for easy installation
More informationFeatures. LED Driver RACT Watt. TRIAC Dimmable. Single Output RACT12- AC/DC Converter
Features TRIAC Dimmable LED Driver Triac dimmable with leading or trailing edge dimmers Class II with SELV output (no earth required) Extra-large screw terminals and integrated cable clamps for easy installation
More informationFeatures. Regulated Converter RACM Watt Enclosed & Open Frame Case Style Single Output RACM65- S / - AC/DC Converter.
Features Regulated Converter Long 5 year warranty 2MOPP/250VAC Suitable for built in Class II applications Wide input voltage range (85-264VAC) Low leakage current (
More informationFeatures. Regulated Converters. RACM40 40 Watt Enclosed & Open Frame Case Style Single Output RACM40- S / - AC/DC Converter.
Features Regulated Converters Description Long 5 Year Warranty 2MOPP/250VAC Suitable for built in Class II Applications Wide Input Voltage Range (85-264VAC) Low Leakage Current (
More informationFeatures. Switching Regulator. 2.0 Amp SIP3 Single Output R-78B-2.0 R-78B DC/DC Converter
Features Switching Regulator Description Efficiency up to 96%, no need for heatsinks 2A continuous output current Vin up to 32V Vout: 1.2V - 15V Wide operating temperature - C to +7 C at full load Continuous
More informationHigh power density 3W Converter in SIP7 case. 3kVDC and 4kVDC Isolation Options
Features Unregulated Converters Description High power density 3W Converter in SIP7 case 3kVDC and 4kVDC Isolation Options Efficiency to 9% Certified to IEC/EN62368 The series of 3W high isolation DC/DC
More informationNotes: Note3: without suffix, standard isolation voltage (1kVDC/1 second) with suffix /H, high isolation voltage (3kVDC/1 second)
Features Unregulated Converters Description 1W Power In SMD Package Pin Compatible With R1S -4 C To +1 C Operating Temperature @ Full Load high 3kVDC/1 Second or 1kVDC/1 Second Isolation IEC/EN/UL62368-1
More informationFeatures. Regulated Converter. REM6 6 Watt 2:1 & 4:1 DIP24 Single and Dual. Output. DC/DC Converter
Features Regulated Converter Reinforced insulation for 250VAC working voltage Clearance and creepage distance: 8mm 5kVAC I/P to O/P 2MOPP isolation 2µA patient leakage current Industry standard pinout
More informationFeatures. Regulated Converter. REM10 10 Watt. 2:1 & 4:1 DIP24 Single and Dual Output REM10- / DC/DC Converter
Features Regulated Converter Description Reinforced insulation for 250VAC working voltage Clearance and creepage distance: 8mm 5kVAC I/P to O/P 2MOPP isolation 2µA patient leakage current Industry standard
More informationNotes: Note1: Max. capacitive load is tested at nominal input voltage and full load. Single or Dual
Features Regulated Converters Description 6-Side Shielding External ON/OFF control 1.6kV Isolation UL/CSA/EN-695-1 Certified 2:1 Input Voltage Range Continuous Short Circuit Protection Efficiency up to
More informationPackaging. nom. Output Voltage
Features Unregulated Converters 1W Power in SMD package Pin compatible with R1S series -40 C to +100 C operating temperature @ full load High 3kVDC/1 second or 1kVDC/1 second isolation IEC/EN/UL62368-1
More informationPinning (3) 4:1 Input Single or Dual. Notes: Note3: /X2 is without ON/OFF CTRL and without Output Voltage Trimming
Features Regulated Converters 4:1 wide input voltage range Compact size 1 x1 package Efficiency up to % Wide operating temperature from - C to +75 C without derating Continuous short circuit protection
More informationLoad (2) Single or Dual
Features Regulated Converter Reinforced insulation for 2VAC working voltage Clearance and creepage distance >8.mm 5kVAC I/P to O/P 2MOPP isolation 2µA patient leakage current Industry standard pinout 4:
More informationFeatures. Unregulated Converters. R1SX/R1DX 1 Watt SMD Single & Dual Output R1_X- /_ -R. DC/DC Converter
Features Unregulated Converters Description 1W Power in SMD package Pin compatible with R1S/R1D series - C To + C Operating temperature @ full load High 3kVDC/1 second or 1kVDC/1 second isolation IEC/EN/UL62368-1
More informationFeatures. Unregulated Converters. R1SX/R1DX 1 Watt SMD Single & Dual Output R1_X- /_ -R. DC/DC Converter
Features Unregulated Converters Description 1W Power in SMD package Pin compatible with R1S/R1D series -4 C To +1 C Operating temperature @ full load High 3kVDC/1 second or 1kVDC/1 second isolation IEC/EN/UL62368
More informationLoad (2) Single or Dual
Features Regulated Converter Reinforced insulation for VAC working voltage Clearance and creepage distance >8.mm kvac I/P to O/P 2MOPP isolation 2µA patient leakage current Industry standard pinout 4:
More informationFeatures. Switching Regulator. 0.5 Amp SIP3 Single Output R R DC/DC Converter
Features Switching Regulator Description Efficiency up to 97%, no need for heatsinks Pin-out compatible with LM78XX linears Very low profile 4.75V - 32V Wide input range Short circuit protection, thermal
More informationOutput Current 1.2VDC 1.5VDC 1.5VDC 1.2VDC 1.5VDC 1.5VDC 0.65VDC. Vout=3.6VDC 180µA. Vout=1.8VDC, use E-cap 330µF Vout=3.3VDC and 3.6VDC.
Features Switching Regulator Description The is a DC/DC boost converter designed to run from single cell batteries. The input voltage range of.65v-3.3v means that alkaline, NiCd, NiMH, zinc-carbon or lithium
More informationFeatures. Regulated Converters. RS6 6 Watt. SIP8 Single and Dual Output. DC/DC Converter. Description. Selection Guide
Features Regulated Converters Description Highest Power Density In SIP Package 1.6kVDC/1 Minute Isolation Efficiency Up To 88% -4 C To +75 C Operating Temperature Range @ Full Load EN695 And UL/EN62368-1
More informationNote1: Measured at nominal input voltage and full load Note2: Measured at minimum input voltage and constant resistive load
Features Regulated Converters Description :1 wide input voltage range 1.kV isolation UL certified Efficiency up to 88% Fixed operating frequency Six-Sided continuous shield No minimum load required The
More informationFeatures. Switching Regulator. 0.5 Amp SIP3 Single Output R-78HB-0.5(L) R-78HB - /L. DC/DC Converter
Features Switching Regulator Description Efficiency up tpo 96%, no heatsinks required Pin-out compatible with LM78XX linears Low profile (L/W/H=.5 x 8.5 x 7.5mm) High input voltage range, up to 7V Short
More informationDSA150 Series. xxx Series. 150 Watts. AC-DC Power Supplies. Models & Ratings. Mechanical Details 3.92 (99.8) 2.18 (55.5) 4.92 (125.
15 Watts xxx Series Ultra Slim Design 15% Peak Load for 3 seconds Ambient Operation from -1 C to +7 C High Efficiency Selectable Overload Characteristic Selectable Remote Inhibit or Enable 3 Year Warranty
More informationFeatures. Switching Regulator. 0.5 Amp SIP3 Single Output R-78HB-0.5(L) DC/DC Converter
Features Switching Regulator Description Efficiency up to 96%, no heatsinks required Pin-out compatible with LM78XX linears Low profile (L/W/H=.5 x 8.5 x 7.5mm) High input voltage range, up to 7V Short
More information3kVDC or 4kVDC isolation Optional continuous short circuit protection UL94V-0 package material Efficiency up to 84% Suitable for IGBT applications
Features Unregulated Converters Description 3kVDC or 4kVDC isolation Optional continuous short circuit protection UL94V- package material Efficiency up to 84% Suitable for IGBT applications The RK and
More informationOutput Voltage* (nom.)(adjustable)
Industrial Power Supplies TIB Series, 80 480 W Slim profile, reduced module width High Power Factor up to 99% High efficiency up to 94% True back power immunity Low heat dissipation 150% peak current Automatic
More informationNote1: Typical values at nominal input voltage and full load. 17.5VDC. Open, 4.5V Short, 0V. 5mA. Efficiency vs. Input Voltage.
Features ICE Technology* Description +115 C Maximum Case Temperature -45 C Minimum Case Temperature Built-in EMC Filter Ribbed Case Style 22VDC Isolation Built-in EMC Filter, EN-522 Class B The RPP20 series
More informationNote1: Typical values at nominal input voltage and full load. 17.5VDC. Open, 4.5V Short, 0V. 5mA. Efficiency vs. Input Voltage.
Features ICE Technology* Description +115 C Maximum Case Temperature -45 C Minimum Case Temperature Built-in EMC Filter Ribbed Case Style 22VDC Isolation Built-in EMC Filter, EN-522 Class B The RPP20 series
More informationNote1: Max. capacitive load is tested at nominal input and constant resistive load. RI3- _/_ Isolation (2) Single
Features Unregulated Converters 3 Watt in a SIP4 Package -3kVDC Isolation Efficiency up to 9% -4 C to + C Operating Temperature Range IEC/EN/UL69 (Pending) CB Report (Pending) Industry Standard Pinout
More informationFeatures. Unregulated Converters. 1 Watt SIP6 Micro Size, Single and Dual Output RBM. RBM- / Protection (3) Single or Dual.
Features Unregulated Converters Micro size SIP 6 package Industry standard pinout Power sharing on dual output version 3kVDC/1s basic isolation Optional continuous short circuit protection Efficiency up
More informationFeatures. Regulated Converter. 5 Watt DIP24 Single Output. Rxx-B R - B. DC/DC Converter
Features Regulated Converter High output voltage DIP24 converter Adjustable output voltage up to VDC Cascadable for output voltages up to VDC 3kVDC input/output isolation Remote voltage programming by
More informationHEC-150RTN-48QSCA. A. Features. B. Description. C. Models. D. Electronic Specifications - Input Specifications
HEC130/150RTN48QSCA A. Features High Efficiency (Up to 90%). Active Power Factor Correction (Typical 0.96). Isolation Class I (With FG) AllRound Protection: OVP/SCP/OTP/OPP. Fully isolated Metal case with
More informationLCL Series. SIngle Output Industrial Supplies. High Efficiency. Low Cost. 150 W Convection Cooled. 300 W & 500 W with Internal Fans
LCL Series SIngle Output Industrial Supplies High Efficiency Low Cost 150 W Convection Cooled 300 W & 500 W with Internal Fans Outputs form 12 V to 48 V 3 Year Warranty The LCL series is a low cost chassis
More informationTPP 40 Series, 40 Watt. Order code Output voltage Output current max. Efficiency. max. screw terminal pin connector Vout 1 Vout 2 Vout 3
, Features High power density 40 W power supply (enclosed / open frame) 2 x MOPP Medical safety according to AAMI/ANSI ES 60601-1:2005(R) and IEC/EN 60601-1 3rd edition Ready to meet ErP directive, < 0.3
More informationPower Factor (2) 600 ma 90 ~ 305 Vac Vdc 34.2 W 86% 0.95 LUC-040S060RSP. Efficiency (2) Parameter Min. Typ. Max. Notes
Features Trailing Edge AC Dimmable Constant Current Output High Efficiency (Up to 86%) Active Power Factor Correction (Up to 0.95) All-Around Protection: OVP, SCP and OLP Description The series operates
More informationCP-E range Benefits and advantages
Benefits and advantages Characteristics Output voltages 5 V, 12 V, 2 V, 8 V DC Adjustable output voltages Benefits Signalling output/contact Output currents 0.625 A / 0.75 A / 1.25 A / 2.5 A / A / 5 A
More informationTypical Efficiency (2) Max. Output Power. 24 Vdc 90 ~ 305 Vac 0~1080mA 26 W 84% EUV-026S024PS(3)
EUV026SxxxPS Features High Efficiency (Up to 86%) Active Power Factor Correction (Typical 0.95) Constant Output Voltage Waterproof (IP66) and Damp Location AllAround Protection: OVP, SCP, OCP Class 2 and
More informationHEC-40LTN-XXPSCA Rev A
HEC40LTNXXPSCA Rev A A. Features High Efficiency (Up to 89%). Active Power Factor Correction (Typical 0.95). Isolation Class II AllRound Protection: OVP/SCP/OTP/OPP. Fully isolated plastic case with IP67
More informationCB Scheme UL508 UL ATEX II3G
Industrial Power Supplies UL Hazloc Class I, division 2 approval and ATEX certification SEMI F47 compliant for voltage sag immunity Rugged metal case with optional side-mounting Very high efficiency up
More informationWatts HCP Series
ACDC 6 Watts HCP Series High Efficiency up to 9% xppower.com High Power Density Programmable Output Voltage (%%) Programmable (%%) Parallel Operation Fully Featured Signals & Controls Year Warranty Specification
More informationDSR120 Series. xxx Series. 120 Watts. AC-DC Power Supplies. Models & Ratings. Mechanical Details
120 Watts xxx Series Ultra Slim Design - 32 mm 150% Peak Load for 3 seconds Ambient Operation from -25 C to +70 C Full Load at 60 C (24V/48V) High Efficiency - Up to 92% Volt-Free Contact for OK Selectable
More informationHEC-100RTA-48QSCA Rev A1.0
HEC100RTA48QSCA Rev A1.0 A. Features High Efficiency (Up to 90%). Active Power Factor Correction (Typical 0.96). Isolation Class I (With FG) AllRound Protection: OVP/SCP/OTP/OPP. Fully isolated Metal case
More informationMax. Output Power. Typical Efficiency (2) 12 Vdc 90 ~ 305 Vac 0~22.9 A 275 W 91.5% EUV-300S012ST
EUV300SxxxST Features High Efficiency (Up to 93.0%) Constant Voltage Output Input Surge Protection: 4kV lineline, 6kV lineearth AllAround Protection: OVP, OCP, SCP, OTP Waterproof (IP67) and UL Dry / Damp
More informationFeatures. Power Module. 2 Amp Single Output RBB RBB DC/DC Converter
Features Power Module 1W buck/boost converter with up to 4A output Input voltage can be higher, lower or same as output voltage >9% efficiency from 1mA 3mA load 7µA standby power consumption Low profile,
More informationHEC-45LTN-45PFAS Rev A
A. Features High Efficiency (Up to 85%). Active Power Factor Correction (Typical 0.96). Isolation Class II. All-Round Protection: OVP/SCP/OPP. Fully isolated plastic case with IP20 and dry location. Class
More informationPower Factor (1) Efficiency (1)
LUC012SxxxDSP(SSP) Rev. B Features 0 10V Dimmable (Compatible with Passive Dimmers) Constant Current High Efficiency Active Power Factor Correction AllRound Protection: OLP, SCP and Open Lamp Protection
More informationVOF XX - XXX - X
date 01/31/018 page 1 of 10 SERIES: VOF-300 DESCRIPTION: AC-DC POWER SUPPLY FEATURES up to 300W continuous power universal input voltage range industry standard 3 x 5 footprint power factor correction
More informationMax. Output Power. Typical Efficiency (2) 12 Vdc 90 ~ 305 Vac 0~12.5 A 150 W 92% EUV-150S012ST
EUV150SxxxST Features High Efficiency (Up to ) Constant Voltage Output Input Surge Protection: 4kV lineline, 6kV lineearth AllAround Protection: OVP, OCP, SCP, OTP Waterproof (IP67) and UL Dry / Damp /
More informationC B. Models. Models 2MOPP
AC/DC Medical Power Supplies High power density 3" x 5" open frame medical power supply 450 Watt with forced air cooling 320 Watt convection cooled without derating up to 50 C Medical certification to
More informationElectrical Specifications. Input Current 115 VAC: 1.2 A max. 230 VAC: 0.65 A max.
WLP120 Industrial Features 3 x 2 foot print Height 1 above PCB 120 Watts with Forced Air Cooling Efficiencies upto 93% -40 to 70 degree operating temperature Thermal Shut-Down feature >3.00m Hours, Telcordia-SR332-issue
More informationVGM Series. 100 & 60 W, Efficient, CV Class 2 LED Drivers for Signage Applications ORDERING INFORMATION
Nominal Input Voltage Max. Output Power Nominal Output Voltage Max. Output Current 120/277 Vac 12, 24, Vdc 5, 3.92 A Efficiency up to 90% typical Max. Case Temperature 100 C (measured at the hot spot)
More information3 in 1 Dimmable (0-10Vdc, PWM signal, or resistance)
FEATURES: AC Input 100~277VAC Built-in Active PFC Function Protection: SCP / OVP / OTP 12V Auxiliary Output Built-in 3 in 1 dimming function (0-10Vdc, 10V PWM signal, or resistance) Power saving < 0.35W
More informationHEC-70LCN-350TDAF Rev B
A. Features High Efficiency (Up to 90%). Active Power Factor Correction (Up to 0.96). Isolation Class II. All-Round Protection: OVP/SCP/OPP Fully isolated metal case with IP20 and dry location. Class 2
More informationOutput Voltage nom. (adjustable)
Industrial Power Supplies TIB Series, 80 480 W Slim profile, reduced module width Alternative side-mounting for flat panels Active Power Factor High efficiency up to 94% Back power immunity 150% peak current
More information50W Constant Current (700mA) Dimming LED Driver
50W Constant Current (700mA) Dimming LED Driver IZC070-050A-9267C-SA Product Overview The IZC070-050A-9267C-SA operate from a 90-305 Vac input range. This unit will provide up to a 700mA of output current
More informationTMT Series, 10 to 50 Watt. Order Code Output Power Output 1 PCB-Mount Chassis Mount max.
TMT Series, 10 to 50 Watt Features Ultra compact, fully encapsulated plastic case Single-, dual- and triple output models 2 package styles: - with screw terminal block for chassis mount - with solder pins
More informationOutput Current Range. Max. Output Power. 12 Vdc 90 ~ 305 Vac 10.8~13.2V 0~2900mA 35 W 82% EUV-035S012ST(3)
EUV035SxxxST Features High (Up to 86%) Active Power Factor Correction (Typical 0.92) Constant Waterproof (IP67) and Damp & Wet Location AllRound Protection: OVP, SCP, OCP Description The EUV035SxxxST Series
More informationSTRATO 70W LED P DESCRIPTION KEY FEATURES APPLICATIONS AND BENEFITS MODEL CODING AND OUTPUT RATINGS TRC ELECTRONICS, INC
STRATO 70W LED P S DESCRIPTION STRATO switch mode driver technology is designed to generate one constant voltage output from a wide range AC input. The size and performance of these products make them
More informationOutput Voltage nom. (adjustable)
Industrial Power Supplies TIB Series, 80 480 W Slim profile, for DI-rail mounting Alternative side-mounting for flat panels High power factor by active power correction Very high efficiency up to 94.5%
More informationHEC-30/35LTA-33TDAA Rev A
A. Features High Efficiency (Up to 86%). Active Power Factor Correction (Typical 0.95). Isolation Class II All-Round Protection: OVP/SCP/OTP/OPP. Fully isolated metal case with IP20 and dry location. 1-10V,
More informationHEC-35LTA-XXTSAA Rev A
A. Features High Efficiency (Up to 87%). Active Power Factor Correction (Typical 0.95). Isolation Class II. All-Round Protection: OVP/SCP/OTP/OPP. Fully isolated plastic case with IP20 and dry location.
More information75W Constant Current (700mA) LED Driver
75W Constant Current (700mA) LED Driver IZC070-075A-9267C-SA Product Overview The IZC070-075A-9267C-SA operates from a 90-305 Vac input range. This unit will provide up to 700mA of output current and a
More informationCP-T range Product group picture
Product group picture /1 ABB Catalog Electronic Products and Relays 1/1 2CDC 110 00 C09 Table of contents CP-T range Product group picture /1 Table of contents /2 Benefits and advantages / Ordering details
More informationVIM Series. 90 & 60 W, Efficient, CV Class 2 LED Drivers ORDERING INFORMATION
060W-12 100W-24 Nominal Input Voltage 90 &, Efficient, CV Class 2 Max. Output Power Nominal Output Voltage Max. Output Current 120 & 277 Vac 12, 24 Vdc 5, 3.75 A Efficiency up to 90% typical Max. Case
More informationPrimary switch mode power supplies Product group picture
Primary switch mode power supplies Product group picture /1 ABB Catalog Electronic Products and Relays 2015 2CDC 110 004 C0210 Primary switch mode power supplies Table of contents Primary switch mode power
More informationElectrical Specifications VAC/390 VDC, Universal (Derate from 100% at 115VAC to 78% at 90VAC)
MWLC550 Medical Features 5 x 3 x 1.5 Inches Form factor Up to 550 Watts with Forced Air Cooled Efficiencies up to 92% -40 to 70 degree operating temperature* 12V / 0.5A Fan Output, Thermal Shut-Down feature
More informationType CP-S, CP-C & CP-A Switch mode
Switch mode power CP-S, CP-C & CP-A Switch mode Characteristics CP-S and CP-C range Output current 5 A, 10 A and 20 A Integrated power reserve of up to 50 % 5 A and 10 A devices with pluggable connecting
More informationMax. Output Power. Efficiency (1) 110Vac 220Vac
LED Driver EUV150SxxxST 20100531 H Features Ultra High (Up to ) High Power Factor (0.99 Typical) 150 W Continuous Power Lightning Protection AllRound Protection: OVP, OCP, SCP, OTP Waterproof (IP67) Comply
More informationIndustrial Serie +600S
D A T A S H E E T Industrial Serie +6S Modular Configurable Reduced fan noise Enhanced Line Derating 6 watts in the palm of your hand The +6S series fetures improved low input line derating delivers 6
More informationFeatures. Non Isolated Power Module ROF-78E ROF-78E - SMD-R. DC/DC Converter
Features Low profile 4.mm Low cost Wide input range (5V - 36V) Short circuit protection Casellated connections Description The is a switching regulator with a wide input voltage range, high effi ciency
More informationMAD40 MULTI -OUTPUT SERIES OPP SCP OVP. 2 X 3.5 Inch AC-DC POWER SUPPLIES. UNIVERSAL INPUT RANGE UP TO 40Watts PART NUMBER STRUCTURE LOW CROSS REG.
MAD40 MULTI -OUTPUT SERIES 2 X 3.5 Inch AC-DC POWER SUPPLIES UNIVERSAL INPUT RANGE UP TO 40Watts FEATURES 0.15 WATT LOW STANDBY POWER CONSUMPTION ULTRA LOW CROSS REGULATION UNDER 1.5 WIDE INPUT VOLTAGE
More informationVLM60/40 Series. 60 & 40 W, Efficient, Compact Constant Voltage Class 2 LED Drivers
/40 Nominal Input Voltage 120/277 Vac, 220 to 240 Vac Max. Output Power Nominal Output Voltage Max. Output Current 12, 24, 48 Vdc 5, 2.5, 1.25 A Efficiency up to 90% typical Max. Case Temperature 90 C
More informationMax. Output Power. Typical Efficiency (1) 12 Vdc 90 ~ 305 Vac 0~8.33 A 100 W 91% EUV-100S012ST
EUV100SxxxST Features Ultra High Efficiency (Up to ) High Power Factor (0.99 Typical) Constant Voltage Lightning Protection AllRound Protection: OVP, OCP, SCP, OTP Waterproof (IP67) Description The EUV100SxxxST
More informationElectrical Specifications
450 Watt Medical Features 4 x 6.5 x 1.61 inches Approval to EN60601 3rd Edition Dual Fusing Current Sharing Option Cover and Fan Options Peak Power Capability Class B EMI & Medical (BF) Safety Approvals
More informationCP-T range Benefits and advantages
Benefits and advantages Characteristics Rated output voltages V, V DC Output voltage adjustable via front-face rotary potentiometer OUTPUT Adjust Rated output currents 5 A, 10 A, A, A Rated output powers
More informationPower Factor (1) Efficiency (1) Parameter Min. Typ. Max. Notes A Measured at full load and 100 Vac input
LUC018SxxxDSP(SSP) Features 0 10V Dimmable (Compatible with Passive Dimmers) Constant Current Output High Efficiency Active Power Factor Correction AllRound Protection: OVP, SCP and Open Lamp Protection
More informationTB65 65W Single Output Test and Measurement/Industrial Series
Features 2.0 x 3.5 x 1.3 Package TB65 Up to 65W Convection Cooled Output Power Compliant to high levels of EMC per EN61000-4 15kV ESD (Air), 8kV (Contact) 4kV Surge Meets Class B Conducted EMI with 6db
More informationMB120S 120W Single Output Medical Series
Features 2 x 4 x 1.25 Package, Ideal for 1U Applications 10-year Life design with Premium E-Caps 100 Watts convection cooled Class B Conducted and Radiated EMI performance BF Isolation Type Rated Designed
More informationPower Factor (2) Efficiency (2) 25~ 49 Vdc 66 W 87 % 0.96 LUC-066T045DDM(SDM) 20~ 40 Vdc 66 W 86 % 0.96 LUC-066T056DDM(SDM)
Features 0 10V Dimmable (Compatible with Passive Dimmers) 5% Minimum Dimming Level Three Channels of Constant Current Output High Efficiency (Up to 87%) Active Power Factor Correction (0.96 Typical) Waterproof
More informationPower supply CP-E 24/20.0
2CDC 271 027 F0008 a OUTPUT L+, L+, L, L-: terminals output b INPUT L, N, PE: terminals input c 13-14: terminals - signalling contact d OUTPUT OK: green LED output voltage OK e OUTPUT LOW: red LED output
More information