Note1: Max Cap Load is tested at minimum input and full resistive load. Connections (3) Case Style (1)
|
|
- Basil Lyons
- 5 years ago
- Views:
Transcription
1 Features Regulated Converter Long 5 year warranty 2MOPP/2VAC Suitable for built in Class II applications Wide input voltage range (85-264VAC) Low leakage current (<75µA) m operation - C to +85 C operating temperature Description The is a compact 3 x 2 high effi ciency AC/DC power supply with 2xMOPP safety approval for medical applications. These space saving enclosed power supplies have an universal input voltage range (85-264VAC), 4kVAC isolation, require no minimum load and can be used at ambient temperatures of between - C and +85 C. The 5V, 12V, 15V, 24V or 48V output voltages are fully protected and have tolerances of less than ±.2% over the entire input voltage range and less than ±.5% over the entire load range. The output voltage can be trimmed over a ±1% range. The series is certifi ed to medical safety standard IEC/ES/EN-1-1 3rd Edition and with less than 75µA leakage current. It has a built-in Class B EMI fi lter and comes with a 5 year warranty. 65 Watt Enclosed & Open Frame Case Style Single Output Selection Guide Part Input Output Output Efficiency Max. Capacitive Number Voltage Range Voltage Current typ. Load (1) [VAC] [VDC] [A] [%] [µf] -5S (1,2) S (1,2) S (1,2) S (1,2) S (1,2) MOPP 2VAC Notes: Note1: Max Cap Load is tested at minimum input and full resistive load Model Numbering Output Power Output Voltage Single - S / - Connections (3) Case Style (1) E CSA/CAN-C22.2 No 1-1:14 certified ANSI/AAMI ES1-1 certified EN1-1-2 CISPR11 FCC Part 15 & 18 Notes: Note2: Case Style: without suffi x, standard enclosed case add suffi x /OF for open frame style Note3: Connections: without suffi x, standard connection with connector with suffi x -ST connection with screw terminals Examples: -12S = 12Vout, standard enclosed case -48S/OF = 48Vout, open frame style -15S/OF-ST = 15Vout, open frame style with screw terminal connection REV.: 7/19 MED-1
2 BASIC CHARACTERISTICS Parameter Condition Min. Typ. Max. Input Voltage Input Current 115VAC, full load 2VAC, full load 85VAC 2VAC 264VAC VDC (4) 3VDC Inrush Current cold start, 2VAC A No load Power Consumption.11W Input Frequency Range AC Input /Hz 4Hz (4) Output Voltage Trimming on-board trimpot ±1.% Minimum Load % Start-up Time Rise Time Hold up Time 115VAC, full load 16ms Operating Frequency Range Output Ripple and Noise MHz BW) -24S Efficiency [%] Efficiency vs. Load 5VDC, 2VAC others, 2VAC 5VDC, 12VDC and 15VDC with 1µF/25V MLCC 24VDC, with 1µF/V MLCC 48VDC, with.1µf/v MLCC ms khz 1kHz 75mVp-p 75mVp-p 1mVp-p Notes: Note4: Confi rmed performance, but not covered in certifi cates. V input voltage with derating 115VAC 1 2VAC 1 Efficiency [%] Line Derating Efficiency vs. Input Voltage 1.6A.9A 1 % load % load Input Voltage [VAC] 1s Input Voltage [VAC] REV.: 7/19 MED-2
3 REGULATIONS Parameter Condition Value Set Voltage Accuracy 2VAC, full load ±1.% Line Voltage Regulation low line to high line, full load ±.2% Load Voltage Regulation % to % load 1% to % load Transient Peak Deviation load step from % - 75% change at 2.5A/µs 3.% Vout max. Transient Recovery Time load step from % - 75% change at 2.5A/µs µs typ. Deviation vs. Load Deviation [%] VAC 2VAC -24S 5VDC others 5VDC others %.5%.6%.4% PROTECTIONS Parameter Condition Value Input Fuse Short Circuit Protection (SCP) internal line neutral T3.15A / 2VAC, slow blow type T3.15A / 2VAC, slow blow type continuous, auto-recovery Over Load Protection (OLP) % of Iout rated (Hiccup) 145% typ. Over Voltage Protection (OVP) % of Vout nominal (Latch off) 125% min / 1% max. Isolation Voltage (5) tested for 1 minute I/P to O/P I/P to Case, O/P to Case 4kVAC 2.5kVAC Isolation Resistance VDC MΩ min. Insulation Grade reinforced Leakage Current 264VAC 75µA max. Means of Protection working voltage 2VAC/continuous 2MOPP Medical Device Classifi cation Internal clearance creepage Notes: Note5: For repeat Hi-Pot testing, reduce the time and/or the test voltage built-in power supply >8.mm >8.mm REV.: 7/19 MED-3
4 ENVIRONMENTAL Parameter Condition Value Operating Temperature Range refer to derating graph - C to +85 C Temperature Coeffi cient Operating Altitude ±.2%/K m max. Operating Humidity non-condensing 5% to 95% RH Pollution Degree Shock Vibration PD2 according to IEC according to IEC MTBF according to MIL-HDBK-217F, full load, +25 C 1494 x 1 3 hours Derating Graph (@ natural convection.1m/s) -5,12,48S(/OF) 1 115VAC 2VAC Ambient Temperature [ C] ,24S(/OF) 1 115VAC 2VAC Ambient Temperature [ C] SAFETY AND CERTIFICATIONS Certificate Type (Safety) Report / File Number Standard Medical Electric Equipment, General Requirements for Safety and Essential Performance Medical Electric Equipment, General Requirements for Safety and Essential Performance (CB Scheme) E CAN/CSA-C22.2 No. 1-1:14 ANSI/AAMI ES1-1:5 + A2:1 IEC1-1:5 + C2:7, 3rd Edition EN1-1:6 Information Technology Equipment - General Requirements for Safety (LVD) EN9-1:6 + A2:13 TW18-1 Information Technology Equipment - General Requirements for Safety IEC9-1:5, 2nd Edition + A2:13 EAC RU-AT TP TC 4/11 TP TC 4/11 RoHs2+ RoHS-11/65/EU + AM-15/863 EMC Compliance (Medical) Conditions Standard / Criterion Medical electrical equipment - Part 1-2: General requirements for basic safety and essential performance - Collateral standard: Electromagnetic compatibility - Requirements and tests Industrial, scientifi c and medical equipment - Radio frequency disturbance characteritics - Limits and methods of measurement EN1-1-2:15 CISPR11:9 + A1:1, Class B continued on next page REV.: 7/19 MED-4
5 EMC Compliance (Medical) Conditions Standard / Criterion ESD Electrostatic discharge immunity test Air ±15kV; Contact ±8kV IEC-4-2:8 Radiated, radio-frequency, electromagnetic fi eld immunity test V/m (-MHz) 27V/m (385MHz) 28V/m (4MHz) IEC-4-3:6 + A2:1 Fast Transient and Burst Immunity AC Power Port: ±2kV IEC-4-4:12 Surge Immunity AC Port: L-N= ±1kV L-GND= ±2kV IEC-4-5:14 Immunity to conducted disturbances, induced by radio-frequency fi elds Vr.m.s IEC-4-6:13 Power Frequency Magnetic Field Hz, A/m IEC-4-8:9 Voltage Dips and Interruptions Limits of Voltage Fluctuations and Flicker Dips: >95%; %; Interruptions >95% IEC-4-11:4 EN-3-3:13 Limitations on the amount of electromagnetic intererence allowed from digital & electronic devices 47CFR FCC Part 15 Subpart B, Class B Methods of Measurement of Radio-Noise Emissions from Low-Voltage Electrical and Electronic Equipment in the Range of 9 khz to GHz ANSI C63.4:14 FCC methods of measurement of radio noise emissions from industrial, scientifi c, and medical equipment FCC OST/MP-5 EMC Compliance (Industrial) Conditions Standard / Criterion Electromagnetic compatibility of multimedia equipment Emission Requirements Information technology equipment - Immunity characteristics - Limits and methods of measurement EN532:15+AC:13, Class B EN524:1+A1:15 ESD Electrostatic discharge immunity test Air ±15kV; Contact ±6kV IEC-4-2:8, Criteria A Radiated, radio-frequency, electromagnetic fi eld immunity test 1V/m (-MHz) V/m (-MHz) IEC-4-3:6 + A2:1, Criteria A Fast Transient and Burst Immunity AC Power Port: ±4kV IEC-4-4:12, Criteria A Surge Immunity AC Port: L-N= ±2kV L-PE= ±4kV IEC-4-5:14, Criteria A Immunity to conducted disturbances, induced by radio-frequency fi elds AC Power Port 1V, V IEC-4-6:13, Criteria A Power Frequency Magnetic Field Voltage Dips and Interruptions Damped oscillatory wave immunity test Limits of Voltage Fluctuations and Flicker Hz/Hz, A/m, A/m Dips: >95%; %; % Interruptions >95% AC Port: L-N= ±1kV L/N-G= ±2.5kV IEC-4-8:9, Criteria A IEC-4-11:4, Criteria A IEC-4-11:4, Criteria B IEC-4-18:6 + A1:1, Criteria A EN-3-3:13 DIMENSION and PHYSICAL CHARACTERISTICS Parameter Type Value Material Dimension (LxWxH) Weight enclosed case PCB enclosed case open frame enclosed case open frame + -ST version aluminum FR4, (UL94V-) 91.4 x.5 x 33.3mm 76.2 x.8 x 26.5mm 172g 137g continued on next page REV.: 7/19 MED-5
6 Dimension Drawing Enclosed Case (mm) Top View FC FC Side View logo embossed AC Input Connector () Pin# Terminal Mating Housing 1 AC/L 3 AC/N (SD-2478) (931) DC Output Connector () Pin# Terminal Mating Housing 1,2 V- 3,4 V+ (SD-2478) (941) Bottom View M3 screws continued on next page REV.: 7/19 MED-6
7 Dimension Drawing Open Frame (/OF) (mm) Top View Connector Version Ø FC 69.8 Screw Terminal Version -ST DC Output Connector () Pin# Trim Terminal Adj. Mating Housing Screw Terminal Connection -ST Top View logo embossed Screw Terminal Version -ST Enclosed Version logo embossed Open Frame Version logo embossed 2.5 FC Side View AC Input Connector () Pin# Terminal Mating Housing 1 AC/L 3 AC/N 1,2 V- 3,4 V+ (SD-2478) (SD-2478) (931) (941) Screw terminal information # Function AWG Model 1 VAC in (L) ETB 3 VAC in (N) (EK381V) 1,2 -Vout ETB 3,4 +Vout (EK381V) recommended tightening torque:.2nm REV.: 7/19 MED-7
8 PACKAGING INFORMATION Parameter Type Value Packaging Dimension (LxWxH) cardboard box enclosed case 1. x. x 85.mm open frame 111. x 94. x 51.mm Packaging Quantity 1pcs Storage Temperature Range - C to +85 C Storage Humidity non-condensing 5% to 95% RH The product information and specifications may be subject to changes even without prior written notice.the product has been designed for various applications; its suitability lies in the responsibility of each customer. The products are not authorized for use in safety-critical applications without RECOM s explicit written consent. A safety-critical application is an application where a failure may reasonably be expected to endanger or cause loss of life, inflict bodily harm or damage property. The applicant shall indemnify and hold harmless RECOM, its affiliated companies and its representatives against any damage claims in connection with the unauthorized use of RECOM products in such safety-critical applications. REV.: 7/19 MED-8
Features. Regulated Converter RACM Watt Enclosed & Open Frame Case Style Single Output RACM65- S / - AC/DC Converter.
Features Regulated Converter Long 5 year warranty 2MOPP/250VAC Suitable for built in Class II applications Wide input voltage range (85-264VAC) Low leakage current (
More informationFeatures. Regulated Converters. RACM40 40 Watt Enclosed & Open Frame Case Style Single Output RACM40- S / - AC/DC Converter.
Features Regulated Converters Description Long 5 Year Warranty 2MOPP/250VAC Suitable for built in Class II Applications Wide Input Voltage Range (85-264VAC) Low Leakage Current (
More informationFeatures. Regulated Converters. RACM Watt Enclosed Case Style Single Output. RACM150- S/ _ Fan Option (1) Single. AC/DC Converter.
Features Regulated Converters Description Long 5 Year Warranty 2MOPP/250VAC Suitable for built in Class II Applications Wide Input Voltage Range (85-264VAC) Low Leakage Current (
More informationFeatures. Regulated Converter. RAC04-C/277 4 Watt Single and Dual Output RAC04- C/277 -_. AC/DC Converter
Features Regulated Converter Description mw max. no load power consumption High efficiency up to 79% Isolated Output 3.75kVAC / 1 minute SCP, OVP protection Wide operating temperature range: -4 C to +
More informationFeatures. Regulated Converter. RAC05-K 5 Watt 1 x 1. Single Output RAC05- SK. AC/DC Converter
Features Regulated Converter Description 5W Class II power supply in compact 1 x 1 Package (high power density) Internal EMC class B filter UL/IEC/EN695-1 certified UL/IEC/EN62368-1 certified Electrical
More informationFeatures. Regulated Converters. RAC01-C RAC02-C 1-2 Watt Single Output RAC0_- C. AC/DC Converter
Features Regulated Converters Description Compact low profile AC-DC power supply mw no load power consumption Class II power supply with kvac isolation Universal input voltage range (~VAC) Low output ripple/noise
More informationParameter Condition Min. Typ. Max. Internal Input Filter 115VAC 230VAC 115VAC 230VAC. No load Power Consumption
Features Regulated Converter Universal input VAC 3W PCB mount package
More informationNote1: Efficiency is tested at nominal input and full load at +25 C ambient Note2: Max Cap Load is tested at nominal input and full resisitive load
Features Regulated Converter Description 4mW max. no load power consumption High efficiency up to 76% Isolated output 3kVAC / 1 min SCP, OVP protection Wide operating temperature range: -4 C to +85 C Universal
More informationParameter Condition Min. Typ. Max. Internal Input Filter. refer to line derating graph on PA-4 115VAC 230VAC 115VAC 230VAC. No load Power Consumption
Features Regulated Converter Universal input 85-35VAC 3W PCB mount package
More informationFeatures. Regulated Converter. REM6 6 Watt 2:1 & 4:1 DIP24 Single and Dual. Output. DC/DC Converter
Features Regulated Converter Reinforced insulation for 250VAC working voltage Clearance and creepage distance: 8mm 5kVAC I/P to O/P 2MOPP isolation 2µA patient leakage current Industry standard pinout
More informationFeatures. Regulated Converter. RAC05-K/277 5 Watt Single Output RAC05- SK/277/W. AC/DC Converter
Features Regulated Converter Description Wide input range 85-5VAC Standby mode optimized (eco design Lot 6) High efficiency over the entire load range Operating temperature range: - C to + C Overvoltage
More informationFeatures. Regulated Converter. RAC02-SE/277/W 2 Watt Single Output. RAC02- SE/277/W Wired. AC/DC Converter
Features Regulated Converter Description 35mW max. no load power consumption Efficiency up to 76% Isolated output 3kVAC / 1 minute SCP, OVP protection Wide operating temperature range: -4 C to +85 C Universal
More informationFeatures. Regulated Converter. RAC02-SE/277 2 Watt Single Output RAC02- SE/277. AC/DC Converter
Features Regulated Converter Description 5mW max. no load power consumption Efficiency up to 76% Isolated output kvac / min SCP, OVP protection Wide operating temperature range: -4 C to +85 C Universal
More informationFeatures. Regulated Converters. RAC05-K 5 Watt 1 x 1 Single Output RAC05- SK. AC/DC Converter
Features Regulated Converters 5W Class II Power Supply in Compact 1 x 1 Package (High Power Density) Internal EMC Class B Filter UL/IEC/EN695-1 certified UL/IEC/EN62368-1 certified Electrical Protection
More informationIEC/EN/UL60950 & CE certified, EN55032 Class B
Features Regulated Converter Universal input VAC 3W PCB mount package
More informationFeatures. Regulated Converter RAC05- SK/C14. RAC 5 Watt Single Output RAC05-3.3SK/C14. AC/DC Converter
Features Regulated Converter Unique, patent-pending design Isolated power supply with integrated mains filter Packaged inside of line filter case Safe, touchable DC outputs Easy installation Worldwide
More informationFeatures. Regulated Converter RAC Watt Single Output. AC/DC Converter
Features Regulated Converter Description Wide input range 8-64VAC Standby mode optimized PSU (ENER Lot 6) Ultra-high efficiency over entire load range Operating temperature range: -4 C to +8 C Class II
More informationFeatures. Regulated Converter. RAC10-K/ Watt 2 x 1 Single and Dual Output RAC10- K/277. AC/DC Converter
Features Regulated Converter Description Wide input range 85-35Vac Full load temperature range: -4 C to +65 C Ultra-high efficiency over entire load range No external components necessary International
More informationFeatures. Switching Regulator. 2.0 Amp SIP3 Single Output R-78B-2.0 R-78B DC/DC Converter
Features Switching Regulator Description Efficiency up to 96%, no need for heatsinks 2A continuous output current Vin up to 32V Vout: 1.2V - 15V Wide operating temperature - C to +7 C at full load Continuous
More informationFeatures. Regulated Converter. REM10 10 Watt. 2:1 & 4:1 DIP24 Single and Dual Output REM10- / DC/DC Converter
Features Regulated Converter Description Reinforced insulation for 250VAC working voltage Clearance and creepage distance: 8mm 5kVAC I/P to O/P 2MOPP isolation 2µA patient leakage current Industry standard
More informationLoad (2) Single or Dual
Features Regulated Converter Reinforced insulation for 2VAC working voltage Clearance and creepage distance >8.mm 5kVAC I/P to O/P 2MOPP isolation 2µA patient leakage current Industry standard pinout 4:
More informationLoad (2) Single or Dual
Features Regulated Converter Reinforced insulation for VAC working voltage Clearance and creepage distance >8.mm kvac I/P to O/P 2MOPP isolation 2µA patient leakage current Industry standard pinout 4:
More informationPackaging. nom. Output Voltage
Features Unregulated Converters 1W Power in SMD package Pin compatible with R1S series -40 C to +100 C operating temperature @ full load High 3kVDC/1 second or 1kVDC/1 second isolation IEC/EN/UL62368-1
More informationHigh power density 3W Converter in SIP7 case. 3kVDC and 4kVDC Isolation Options
Features Unregulated Converters Description High power density 3W Converter in SIP7 case 3kVDC and 4kVDC Isolation Options Efficiency to 9% Certified to IEC/EN62368 The series of 3W high isolation DC/DC
More informationFeatures. LED Driver RACT Watt. TRIAC Dimmable. Single Output RACT12- AC/DC Converter
Features TRIAC Dimmable LED Driver Triac dimmable with leading or trailing edge dimmers Class II with SELV output (no earth required) Extra-large screw terminals and integrated cable clamps for easy installation
More informationFeatures. LED Driver RACT Watt. TRIAC Dimmable. Single Output RACT AC/DC Converter
Features TRIAC Dimmable LED Driver Triac dimmable with leading or trailing edge dimmers Class II with SELV output (no earth required) Extra-large screw terminals and integrated cable clamps for easy installation
More informationNotes: Note1: Efficiency is tested at nominal input and full load at +25 C ambient. Output Voltage 400VAC 320VAC 360VAC 400VAC 400VAC
Features DIN-Rail 2 and 3-phase operation Input voltage range: 320 575VAC Output trim range: 22.5 29.5VDC High electrical strength; high reliability Permanent overload and short-circuit protection Parallel
More informationEfficiency [%] 115VAC 230VAC. Parameter Condition Value. Line Regulation low line to high line ±0.5% max. Load Regulation 10% to 100% load ±0.5% max.
Features Regulated Converter Universal Input VAC 3W PCB Mount Package
More informationNotes: Note1: Efficiency is tested at nominal input and full load at +25 C ambient. Output Voltage 400VAC 400VAC
Features DIN-Rail Description 2 and 3-phase operation Input voltage range: 320 575VAC Output trim range: 22.5 29.5VDC High electrical strength; high reliability Permanent overload and short-circuit protection
More informationNotes: Note3: without suffix, standard isolation voltage (1kVDC/1 second) with suffix /H, high isolation voltage (3kVDC/1 second)
Features Unregulated Converters Description 1W Power In SMD Package Pin Compatible With R1S -4 C To +1 C Operating Temperature @ Full Load high 3kVDC/1 Second or 1kVDC/1 Second Isolation IEC/EN/UL62368-1
More informationPinning (3) 4:1 Input Single or Dual. Notes: Note3: /X2 is without ON/OFF CTRL and without Output Voltage Trimming
Features Regulated Converters 4:1 wide input voltage range Compact size 1 x1 package Efficiency up to % Wide operating temperature from - C to +75 C without derating Continuous short circuit protection
More information3kVDC or 4kVDC isolation Optional continuous short circuit protection UL94V-0 package material Efficiency up to 84% Suitable for IGBT applications
Features Unregulated Converters Description 3kVDC or 4kVDC isolation Optional continuous short circuit protection UL94V- package material Efficiency up to 84% Suitable for IGBT applications The RK and
More informationFeatures. Unregulated Converters. 1 Watt SIP6 Micro Size, Single and Dual Output RBM. RBM- / Protection (3) Single or Dual.
Features Unregulated Converters Micro size SIP 6 package Industry standard pinout Power sharing on dual output version 3kVDC/1s basic isolation Optional continuous short circuit protection Efficiency up
More informationFeatures. Unregulated Converters. R1SX/R1DX 1 Watt SMD Single & Dual Output R1_X- /_ -R. DC/DC Converter
Features Unregulated Converters Description 1W Power in SMD package Pin compatible with R1S/R1D series - C To + C Operating temperature @ full load High 3kVDC/1 second or 1kVDC/1 second isolation IEC/EN/UL62368-1
More information18V 35V 65V 40A 60A 1.5W 1.2W ms 40ms. 20ms 20ms. 100mVp-p 200mVp-p 120mVp-p 240mVp-p -25 C - 70 C 48Vout 240mVp-p
Features DIN Rail Universal AC Input (85) Protections: SCP, OVP, OLP, OTP DC OK Indicator LED with Relay Contacts 15% (18W) peak load capacity Builtin active PFC,PF>,95 High effciency up to 9.5% AC/DC
More information18V 35V 65V 40A 60A 1.5W 1.2W ms 40ms. 20ms 20ms
Features DIN Rail Description Universal AC Input (85264VAC) Protections: SCP, OVP, OLP, OTP DC OK Indicator LED with Relay Contacts 5% (8W) peak load capacity Builtin active PFC,PF>,95 High effciency up
More informationFeatures. Switching Regulator. 0.5 Amp SIP3 Single Output R R DC/DC Converter
Features Switching Regulator Description Efficiency up to 97%, no need for heatsinks Pin-out compatible with LM78XX linears Very low profile 4.75V - 32V Wide input range Short circuit protection, thermal
More informationFeatures. Unregulated Converters. R1SX/R1DX 1 Watt SMD Single & Dual Output R1_X- /_ -R. DC/DC Converter
Features Unregulated Converters Description 1W Power in SMD package Pin compatible with R1S/R1D series -4 C To +1 C Operating temperature @ full load High 3kVDC/1 second or 1kVDC/1 second isolation IEC/EN/UL62368
More informationFeatures. Regulated Converter. 5 Watt DIP24 Single Output. Rxx-B R - B. DC/DC Converter
Features Regulated Converter High output voltage DIP24 converter Adjustable output voltage up to VDC Cascadable for output voltages up to VDC 3kVDC input/output isolation Remote voltage programming by
More informationFeatures. Regulated Converters. RS6 6 Watt. SIP8 Single and Dual Output. DC/DC Converter. Description. Selection Guide
Features Regulated Converters Description Highest Power Density In SIP Package 1.6kVDC/1 Minute Isolation Efficiency Up To 88% -4 C To +75 C Operating Temperature Range @ Full Load EN695 And UL/EN62368-1
More informationOutput Current 1.2VDC 1.5VDC 1.5VDC 1.2VDC 1.5VDC 1.5VDC 0.65VDC. Vout=3.6VDC 180µA. Vout=1.8VDC, use E-cap 330µF Vout=3.3VDC and 3.6VDC.
Features Switching Regulator Description The is a DC/DC boost converter designed to run from single cell batteries. The input voltage range of.65v-3.3v means that alkaline, NiCd, NiMH, zinc-carbon or lithium
More informationNote1: Measured at nominal input voltage and full load Note2: Measured at minimum input voltage and constant resistive load
Features Regulated Converters Description :1 wide input voltage range 1.kV isolation UL certified Efficiency up to 88% Fixed operating frequency Six-Sided continuous shield No minimum load required The
More informationFeatures. Switching Regulator. 0.5 Amp SIP3 Single Output R-78HB-0.5(L) R-78HB - /L. DC/DC Converter
Features Switching Regulator Description Efficiency up tpo 96%, no heatsinks required Pin-out compatible with LM78XX linears Low profile (L/W/H=.5 x 8.5 x 7.5mm) High input voltage range, up to 7V Short
More informationFeatures. Switching Regulator. 0.5 Amp SIP3 Single Output R-78HB-0.5(L) DC/DC Converter
Features Switching Regulator Description Efficiency up to 96%, no heatsinks required Pin-out compatible with LM78XX linears Low profile (L/W/H=.5 x 8.5 x 7.5mm) High input voltage range, up to 7V Short
More informationNotes: Note1: Max. capacitive load is tested at nominal input voltage and full load. Single or Dual
Features Regulated Converters Description 6-Side Shielding External ON/OFF control 1.6kV Isolation UL/CSA/EN-695-1 Certified 2:1 Input Voltage Range Continuous Short Circuit Protection Efficiency up to
More informationFeatures. Non Isolated Power Module ROF-78E ROF-78E - SMD-R. DC/DC Converter
Features Low profile 4.mm Low cost Wide input range (5V - 36V) Short circuit protection Casellated connections Description The is a switching regulator with a wide input voltage range, high effi ciency
More information4.59A 2.36A 6.8A 13A 3.85W 2.85W ms 21ms. 31ms 100ms 48Vout 49ms 100ms. 240mVp-p 480mVp-p C 48Vout 480mVp-p
Features DI Rail Description Universal AC Input (85264VAC) Protections: SCP, OVP, OP, OTP DC OK Indicator ED with Relay Contacts 15% (72W) peak load capacity Builtin active PFC, PF>.95 High effciency up
More informationC B. Models. Models 2MOPP
AC/DC Medical Power Supplies High power density 3" x 5" open frame medical power supply 450 Watt with forced air cooling 320 Watt convection cooled without derating up to 50 C Medical certification to
More informationTPP 40 Series, 40 Watt. Order code Output voltage Output current max. Efficiency. max. screw terminal pin connector Vout 1 Vout 2 Vout 3
, Features High power density 40 W power supply (enclosed / open frame) 2 x MOPP Medical safety according to AAMI/ANSI ES 60601-1:2005(R) and IEC/EN 60601-1 3rd edition Ready to meet ErP directive, < 0.3
More informationMAD40 MULTI -OUTPUT SERIES OPP SCP OVP. 2 X 3.5 Inch AC-DC POWER SUPPLIES. UNIVERSAL INPUT RANGE UP TO 40Watts PART NUMBER STRUCTURE LOW CROSS REG.
MAD40 MULTI -OUTPUT SERIES 2 X 3.5 Inch AC-DC POWER SUPPLIES UNIVERSAL INPUT RANGE UP TO 40Watts FEATURES 0.15 WATT LOW STANDBY POWER CONSUMPTION ULTRA LOW CROSS REGULATION UNDER 1.5 WIDE INPUT VOLTAGE
More informationFeatures. Power Module. 2 Amp Single Output RBB RBB DC/DC Converter
Features Power Module 1W buck/boost converter with up to 4A output Input voltage can be higher, lower or same as output voltage >9% efficiency from 1mA 3mA load 7µA standby power consumption Low profile,
More informationM A D 65 U S 12 B - PART NUMBER STRUCTURE Page 1. P-DUKE Technology Co., Ltd.
Medical Automation Datacom IPC Industry Measurement Telecom Automobile Boat Charger PV Railway PART NUMBER STRUCTURE M A D 65 U S 12 B - Application Package Dimension Output Input Output Output Protection
More informationFeatures. Switching Regulator. 1-2 Amp SIP12 Vertical & Horizontal Single Output. R-6xxxP_D. R-6 x. DC/DC Converter
Features Switching Regulator Description Non-isolated Adjustable output voltage 1-2AMP adjustable positive step down integrated switching regulator Internal short circuit protection ON/OFF control (ground
More informationPART NUMBER STRUCTURE. P-DUKE Technology Co., Ltd Page 1
Medical Automation Datacom IPC Industry Measurement Telecom Automobile Boat Charger PV Railway PART NUMBER STRUCTURE M A D 40 U S 12 B - Application Package Dimension Output Input Output Output Protection
More informationNote1: Max. capacitive load is tested at nominal input and constant resistive load. RI3- _/_ Isolation (2) Single
Features Unregulated Converters 3 Watt in a SIP4 Package -3kVDC Isolation Efficiency up to 9% -4 C to + C Operating Temperature Range IEC/EN/UL69 (Pending) CB Report (Pending) Industry Standard Pinout
More informationFeatures. Switching Regulator. 2,3,4 Amp SIP12 Vertical & Horizontal Single Output. R-7xxxP_D. R-7 x. DC/DC Converter
Features Switching Regulator Description Non-isolated Synchronous rectification design Adjustable output voltage 2, 3, 4Amp adjustable positive step down Integrated switching regulator Over load protection
More informationFeatures. Switching Regulator. 2,3,4,5 Amp SIP12 Vertical & Horizontal Single Output. R-5xxxPA_DA. R-5 xa. DC/DC Converter
Features Switching Regulator Description Non-isolated Synchronous rectification design Adjustable output voltage 2, 3, 4 & 5AMP adjustable positive step down integrated switching regulator Over load protection
More informationNote1: Typical values at nominal input voltage and full load. 17.5VDC. Open, 4.5V Short, 0V. 5mA. Efficiency vs. Input Voltage.
Features ICE Technology* Description +115 C Maximum Case Temperature -45 C Minimum Case Temperature Built-in EMC Filter Ribbed Case Style 22VDC Isolation Built-in EMC Filter, EN-522 Class B The RPP20 series
More informationPART NUMBER STRUCTURE. P-DUKE Technology Co., Ltd Page 1
Medical Automation Datacom IPC Industry Measurement Telecom Automobile Boat Charger PV Railway PART NUMBER STRUCTURE M A D 30 U S 12 B - Application Package Dimension Output Input Output Output Protection
More informationPART NUMBER STRUCTURE. P-DUKE Technology Co., Ltd Page 1. Automation Datacom IPC. Industry Measurement Telecom
Automation Datacom IPC Industry Measurement Telecom Automobile Boat Charger Medical PV Railway PART NUMBER STRUCTURE TAD 65 U B - xx yy - Series Name Output Input Output Output Output Output Output Protection
More informationNote1: Typical values at nominal input voltage and full load. 17.5VDC. Open, 4.5V Short, 0V. 5mA. Efficiency vs. Input Voltage.
Features ICE Technology* Description +115 C Maximum Case Temperature -45 C Minimum Case Temperature Built-in EMC Filter Ribbed Case Style 22VDC Isolation Built-in EMC Filter, EN-522 Class B The RPP20 series
More informationPART NUMBER STRUCTURE. P-DUKE Technology Co., Ltd Page 1
Medical Automation Datacom IPC Industry Measurement Telecom Automobile Boat Charger PV Railway PART NUMBER STRUCTURE M S D 30 U S 12 B - T Application Package Dimension Output Input Output Output Protection
More informationVOF XX - XXX - X
date 01/31/018 page 1 of 10 SERIES: VOF-300 DESCRIPTION: AC-DC POWER SUPPLY FEATURES up to 300W continuous power universal input voltage range industry standard 3 x 5 footprint power factor correction
More informationPower Factor (2) 600 ma 90 ~ 305 Vac Vdc 34.2 W 86% 0.95 LUC-040S060RSP. Efficiency (2) Parameter Min. Typ. Max. Notes
Features Trailing Edge AC Dimmable Constant Current Output High Efficiency (Up to 86%) Active Power Factor Correction (Up to 0.95) All-Around Protection: OVP, SCP and OLP Description The series operates
More informationDSA150 Series. xxx Series. 150 Watts. AC-DC Power Supplies. Models & Ratings. Mechanical Details 3.92 (99.8) 2.18 (55.5) 4.92 (125.
15 Watts xxx Series Ultra Slim Design 15% Peak Load for 3 seconds Ambient Operation from -1 C to +7 C High Efficiency Selectable Overload Characteristic Selectable Remote Inhibit or Enable 3 Year Warranty
More informationFor more information, please visit the product page. output. output current max (A)
date 12/12/217 page 1 of 1 SERIES: VMS-2 DESCRIPTION: AC-DC POWER SUPPLY FEATURES compact 2 x 4 high power-density design (CNF version is 2.4 x 4.6 ) universal input range efficiencies up to 93.5% 4th
More informationDSR120 Series. xxx Series. 120 Watts. AC-DC Power Supplies. Models & Ratings. Mechanical Details
120 Watts xxx Series Ultra Slim Design - 32 mm 150% Peak Load for 3 seconds Ambient Operation from -25 C to +70 C Full Load at 60 C (24V/48V) High Efficiency - Up to 92% Volt-Free Contact for OK Selectable
More informationOutput Full Load
SERIES DC-DC CONVERTER 2:1 & 4:1 WIDE INPUT RANGE UP TO 3.3 WATTS FEATURES REINFORCED INSULATION FOR 2VAC WORKING VOLTAGE CLEARANCE AND CREEPAGE DISTANCE :8.0mm/2MOPP 00VAC INPUT TO OUTPUT 2MOPP ISOLATION
More informationLCL Series. SIngle Output Industrial Supplies. High Efficiency. Low Cost. 150 W Convection Cooled. 300 W & 500 W with Internal Fans
LCL Series SIngle Output Industrial Supplies High Efficiency Low Cost 150 W Convection Cooled 300 W & 500 W with Internal Fans Outputs form 12 V to 48 V 3 Year Warranty The LCL series is a low cost chassis
More informationUL/ RAILWAYS Certified Constant Current LED Driver Wide Input and Output Voltage Range Digital PWM and Analogue Voltage Dimming
Features Regulated Converters Selection Guide UL/ RAILWAYS Certified Constant Current LED Driver Wide Input and Output Voltage Range Digital PWM and Analogue Voltage Dimming Short Circuit Protected Pinned
More informationGeneral. Environmental. EMC & Safety
65// Watts ECS Series IT & Medical Safety Approvals xppower.com 65// W - Ratings Class I & Class II Construction Industry Standard 2 x 4 Package
More informationDoc. EA Model Number:
VPS-030AAC Series / VPS-030AAC 030AAC Highlights & Features VPS-030AAC05, 12, 15, 24 Meet DOE Level VI & ErP 2017 Low touch current. Suitable for type BF applications Detachable AC plug with multiple country
More informationMetal Case Power Supplies
, 120 480 Watt Features Compact U-bracket and enclosed power supplies Screw terminal block Very high efficiency up to 93 % No internal fan for 120 W & 240 W models. Universal input 90 264 VAC Adjustable
More informationMVAB120 Series 120W 2" x 4" AC-DC Power Supply Converter
www.murata-ps.com MVAB120 Series FEATURES ITE (2nd) and Medical 3rd ed. 1MOPP (primarysecondary) safety approved 120W compact high density 2" x 4" standard footprint High effi ciency up to 91% Universal
More informationHEC-70LCN-350TDAF Rev B
A. Features High Efficiency (Up to 90%). Active Power Factor Correction (Up to 0.96). Isolation Class II. All-Round Protection: OVP/SCP/OPP Fully isolated metal case with IP20 and dry location. Class 2
More informationHEC-45LTN-45PFAS Rev A
A. Features High Efficiency (Up to 85%). Active Power Factor Correction (Typical 0.96). Isolation Class II. All-Round Protection: OVP/SCP/OPP. Fully isolated plastic case with IP20 and dry location. Class
More informationIMA 600 Watts Power Supply Series. for medical and industrial applications. Product datasheet
IMA 600 Watts Power Supply Series for medical and industrial applications Product datasheet 600 Watts Power Supply Series for medical and industrial applications Features Safety rated for Medical, Industrial
More informationTMT Series, 10 to 50 Watt. Order Code Output Power Output 1 PCB-Mount Chassis Mount max.
TMT Series, 10 to 50 Watt Features Ultra compact, fully encapsulated plastic case Single-, dual- and triple output models 2 package styles: - with screw terminal block for chassis mount - with solder pins
More informationHEC-30/35LTA-33TDAA Rev A
A. Features High Efficiency (Up to 86%). Active Power Factor Correction (Typical 0.95). Isolation Class II All-Round Protection: OVP/SCP/OTP/OPP. Fully isolated metal case with IP20 and dry location. 1-10V,
More informationHEC-35LTA-XXTSAA Rev A
A. Features High Efficiency (Up to 87%). Active Power Factor Correction (Typical 0.95). Isolation Class II. All-Round Protection: OVP/SCP/OTP/OPP. Fully isolated plastic case with IP20 and dry location.
More informationOrdercode Output Power Output 1 Output 2 Output 3 PCB-mounting Chassis mounting max. with solder pins with screw terminals
Features PCB Mounting with Solder Pins or Chassis Mounting with Screw Terminals Single, Dual and Triple Output Models Universal Input 8-2 VAC, 0 0 Hz EMI meets EN 022, Class B and FCC, Level B Low Ripple
More informationTE60 60W Single Output External Power Test & Measurement/Industrial Series
Features Meets DoE Efficiency Level VI and EU CoC Tier 2 Requirements No load input power Average Efficiency Up to 60W of AC-DC Power Universal Input 90-264Vac Input Range Meets Heavy Industrial Levels
More informationIMA 400 Watts Power Supply Series. for medical and industrial applications. Product data sheet
IMA 400 Watts Power Supply Series for medical and industrial applications Product data sheet 400 Watts Power Supply Series for medical and industrial applications Features Safety rated for Medical, Industrial
More informationMB120S 120W Single Output Medical Series
Features 2 x 4 x 1.25 Package, Ideal for 1U Applications 10-year Life design with Premium E-Caps 100 Watts convection cooled Class B Conducted and Radiated EMI performance BF Isolation Type Rated Designed
More informationTE60 60W Single Output External Power Test & Measurement/Industrial Series
Features Meets DoE Efficiency Level VI Requirements No load input power Average Efficiency Up to 60W of AC-DC Power Universal Input 90-264Vac Input Range IP22 Rated Enclosure Meets Heavy Industrial Levels
More informationVMS-300A - XX - XXX - X
date 05/16/017 page 1 of 10 SERIES: VMS-A DESCRIPTION: AC-DC POWER SUPPLY FEATURES up to W continuous power universal input voltage range industry standard 3 x 5 footprint power factor correction remote
More informationThe MBC550 range is ideally suited to a wide variety of medical applications, and also where airflow is limited or not available.
The MBC550 Series of open frame medical power supplies feature a wide universal AC input range of 90 264 VAC, offering up to 550 W of output power with forced air cooling, or 250 W with conduction cooling
More informationIMA 1000 Watts Power Supply Series. for medical and industrial applications. Product data sheet
IMA 1000 Watts Power Supply Series for medical and industrial applications Product data sheet Features 1000 Watts Power Supply Series for medical and industrial applications Safety rated for Medical, Industrial
More informationElectrical Specifications. Input Current 115 VAC: 1.2 A max. 230 VAC: 0.65 A max.
WLP120 Industrial Features 3 x 2 foot print Height 1 above PCB 120 Watts with Forced Air Cooling Efficiencies upto 93% -40 to 70 degree operating temperature Thermal Shut-Down feature >3.00m Hours, Telcordia-SR332-issue
More informationOutput Voltage* (nom.)(adjustable)
Industrial Power Supplies TIB Series, 80 480 W Slim profile, reduced module width High Power Factor up to 99% High efficiency up to 94% True back power immunity Low heat dissipation 150% peak current Automatic
More informationHEC-150RTN-48QSCA. A. Features. B. Description. C. Models. D. Electronic Specifications - Input Specifications
HEC130/150RTN48QSCA A. Features High Efficiency (Up to 90%). Active Power Factor Correction (Typical 0.96). Isolation Class I (With FG) AllRound Protection: OVP/SCP/OTP/OPP. Fully isolated Metal case with
More informationModel Number Output V1/V2/V3 Output I1/I2/I3 max. Ripple & Noise Efficiency(min/nom) Capacitive Load
130 Watts Output Power Triple Outputs Universal 90-264VAC Input 4242VDC Input to Output Isolation Active Power Factor Correction 3 x 5 x 1.4 Model Number Output V1/V2/V3 Output I1/I2/I3 max. Ripple & Noise
More information50W Constant Current (700mA) Dimming LED Driver
50W Constant Current (700mA) Dimming LED Driver IZC070-050A-9267C-SA Product Overview The IZC070-050A-9267C-SA operate from a 90-305 Vac input range. This unit will provide up to a 700mA of output current
More informationFor more information, please visit the product page If your application requires forced air, view our Dc Fans. output. output current max (ma)
date 12/08/2017 page 1 of 10 SERIES: PBO-1 DESCRIPTION: AC-DC POWER SUPPLY FEATURES up to 1 W continuous power ultra-compact SIP package available in straight-pin and bent-pin configurations wide input
More informationCompliance. Safety Approvals USA Canada Europe. Isolation: General. Dimensions. AC Input CN1 Output CN2 Optional CN3. Weight
IEC 1-1-2 4th Edition Compliant BF (Body Floating) Rated Class II Construction for Home Health Care Applications Class I With Functional Ground Connection 3 x 5 Footprint ua @ 264VAC Earth Leakage Current
More information75W Constant Current (700mA) LED Driver
75W Constant Current (700mA) LED Driver IZC070-075A-9267C-SA Product Overview The IZC070-075A-9267C-SA operates from a 90-305 Vac input range. This unit will provide up to 700mA of output current and a
More informationElectrical Specifications
450 Watt Medical Features 4 x 6.5 x 1.61 inches Approval to EN60601 3rd Edition Dual Fusing Current Sharing Option Cover and Fan Options Peak Power Capability Class B EMI & Medical (BF) Safety Approvals
More informationThese power supplies are ideal for telecom, datacom, industrial equipment and other applications.
The ABC350 Series of open frame power supplies feature a wide universal AC input range of 90 264 VAC, offering 350 W of output power in a compact 3 x 5 x 1 inch footprint, with a variety of isolated single
More informationTE W Single Output External Power Test & Measurement/Industrial Series
Features Meets DoE Efficiency Level VI Requirements No load input power Average Efficiency Up to 120W of AC-DC Power Universal Input 90-264Vac Input Range IPX-2 Rated Enclosure for protection against liquid
More informationMedical Safety Approvals (-M versions) Industrial Heavy Duty Terminals. Output Power up to 1500 W. High Power Density - 18W/in 3
HPU1K5 Series Low Profile 1.7 (43.2 mm), Industrial Supply Medical Safety Approvals (-M versions) Industrial Heavy Duty Terminals Output Power up to 1500 W Load dependant variable speed fans for audible
More information