Electrical Specifications
|
|
|
- Kristian Norman Powers
- 5 years ago
- Views:
Transcription
1 450 Watt Medical Features 4 x 6.5 x 1.61 inches Approval to EN rd Edition Dual Fusing Current Sharing Option Cover and Fan Options Peak Power Capability Class B EMI & Medical (BF) Safety Approvals Meets standard IEC : 2014 (4th Edition) 79 Electrical Specifications Input Voltage VAC/ VDC, Universal Input Frequency Hz Input Current 120 VAC: 4.5 A max. 230 VAC: 2.3 A max. Input Protection Dual Fusing, T8A/250 V in Live & Neutral No Load Power 120 VAC: VAC: 0.8 Inrush Current 120 VAC: 40 A max. 230 VAC: 75 A max. Leakage Current Earth Leakage Current µa, Touch Leakage Current VAC / 63 Hz Efficiency 120 VAC: 88% (24 V, 48 V, 30 V) 86% (12 V) 83% (5 V) Typical 230 VAC: 90% (24 V, 48 V, 30 V) Hold-up Time 120 VAC: 10 ms 230 VAC: 10 ms Power Factor 120 VAC: VAC: 0.95 Output Power 155 to 450 W (475 W for 24 V, 30 V & 500 W for 48 V model only for 5 seconds max.) Line Regulation +/-0.5% Load Regulation +/-3% Transient Response < 10%, 50% to 100% load change, 50 Hz, 50% duty cycle, 0.1 A/µs, recovery time < 5 ms Rise Time < 100 ms Set Point Tolerance +/-1% Output Adjustability +/-3% Over Current Protection 120 to 150%, Hic-Up Type Over Voltage Protection 114%, Latch Type Short Circuit Protection Short term, autorecovery Over Temperature Protection 130 C primary heat sink, autorecovery Current Share Upto 2 Supplies connected in parallel (optional) Switching Frequency PFC converter:variable, khz typical Resonant converter:variable, khz;90 khz typical Operating Temperature -0 to +70 C, refer derating curve Storage Temperature -40 to +85 C Relative Humidity 95% Rh, noncondensing Altitude Operating: 10,000 ft.; Nonoperating: 40,000 ft. MTBF 1.28m Hours, Telcordia -SR332-issue 3 Isolation Voltage 2MOPP 5940 VDC between input to output,1mopp 2121 VDC input to Earth (Ref. Note: 9) Cooling Convection: 300 W; 420 LFM: 450 W (24 V, 30 V & 48 V model) Convection: 250 W; 420 LFM: 450 W (12 V & 15 V model) Convection: 155 W; 420 LFM: 275 W (5 V model)
2 Model Number Type Voltage Max. Load Max. Load Min. Load Ripple 1 (Convection) (420 LFM) LFMWLT U-Channel 5 V 31.0 A 55.0 A 0.0 A 2% LFMWLT I U-Channel + OR-ing MOSFET 5 V 31.0 A 55.0 A 0.0 A 2% LFMWLT T Top Fan 5 V 31.0 A 55.0 A 0.0 A 2% LFMWLT I-T Top Fan + OR-ing MOSFET 5 V 31.0 A 55.0 A 0.0 A 2% LFMWLT S Side Fan 5 V 31.0 A 55.0 A 0.0 A 2% LFMWLT I-S Side Fan + OR-ing MOSFET 5 V 31.0 A 55.0 A 0.0 A 2% LFMWLT U-Channel 12 V A 37.5 A 0.0 A 2% LFMWLT I U-Channel + OR-ing MOSFET 12 V A 37.5 A 0.0 A 2% LFMWLT T Top Fan 12 V A 37.5 A 0.0 A 2% LFMWLT I-T Top Fan + OR-ing MOSFET 12 V A 37.5 A 0.0 A 2% LFMWLT S Side Fan 12 V A 37.5 A 0.0 A 2% LFMWLT I-S Side Fan + OR-ing MOSFET 12 V A 37.5 A 0.0 A 2% LFMWLT U-Channel 15 V A 30.0 A 0.0 A 2% LFMWLT I U-Channel + OR-ing MOSFET 15 V A 30.0 A 0.0 A 2% LFMWLT T Top Fan 15 V A 30.0 A 0.0 A 2% LFMWLT I-T Top Fan + OR-ing MOSFET 15 V A 30.0 A 0.0 A 2% LFMWLT S Side Fan 15 V A 30.0 A 0.0 A 2% LFMWLT I-S Side Fan + OR-ing MOSFET 15 V A 30.0 A 0.0 A 2% LFMWLT U-Channel 24 V 12.3 A A 0.0 A 2% LFMWLT I U-Channel + OR-ing MOSFET 24 V 12.3 A A 0.0 A 2% LFMWLT T Top Fan 24 V 12.3 A A 0.0 A 2% LFMWLT I-T Top Fan + OR-ing MOSFET 24 V 12.3 A A 0.0 A 2% LFMWLT S Side Fan 24 V 12.3 A A 0.0 A 2% LFMWLT I-S Side Fan + OR-ing MOSFET 24 V 12.3 A A 0.0 A 2% LFMWLT U-Channel 48 V 6.25 A 9.37 A 0.0 A 2% LFMWLT I U-Channel + OR-ing MOSFET 48 V 6.25 A 9.37 A 0.0 A 2% LFMWLT T Top Fan 48 V 6.25 A 9.37 A 0.0 A 2% LFMWLT I-T Top Fan + OR-ing MOSFET 48 V 6.25 A 9.37 A 0.0 A 2% LFMWLT S Side Fan 48 V 6.25 A 9.37 A 0.0 A 2% LFMWLT I-S Side Fan + OR-ing MOSFET 48 V 6.25 A 9.37 A 0.0 A 2% LFMWLT U-Channel 30 V 10.0 A 15.0 A 0.0 A 2% LFMWLT I U-Channel + OR-ing MOSFET 30 V 10.0 A 15.0 A 0.0 A 2% LFMWLT T Top Fan 30 V 10.0 A 15.0 A 0.0 A 2% LFMWLT I-T Top Fan + OR-ing MOSFET 30 V 10.0 A 15.0 A 0.0 A 2% LFMWLT S Side Fan 30 V 10.0 A 15.0 A 0.0 A 2% LFMWLT I-S Side Fan + OR-ing MOSFET 30 V 10.0 A 15.0 A 0.0 A 2% 2 Innovations in Power
3 Connectors J1 Pin 1 AC LINE Pin 3 AC NEUTRAL Pin 5 EARTH Spade Connector (J5) J2 Pin 1 V1 Pin 2 RTN J3 Pin 1 NC Pin 2 PF OK Pin 3 POWER GOOD Pin 4 DC RETURN Pin 5 +5 VSTBY Pin 6 +VE REMOTE SENSE Pin 7 -VE REMOTE SENSE Pin 8 CS Pin 9 DC RETURN Pin 10 REMOTE ON/OFF J4 (FAN OUTPUT) Pin 1 + VE Pin 2 - VE Notes 1. Ripple is peak to peak with 20 MHz bandwidth and 10 µf (Tantalum capacitor) in parallel with a 0.1 µf capacitor at rated line voltage and load ranges. Please contact factory/ sales representative for minimum load required for ripple to be within specification. 2. Combined output power of main output, fan supply and standby supply shall not exceed max. power rating. 3. Standby output voltage 5 V/ 1.5A(convection) / 2A(420LFM) with tolerance including set point accuracy, line and load regulation is +/-10%. Ripple and noise is less than 5%. 4. Fan supply output voltage 12V/ 500mA with tolerance including set point accuracy, line and load regulation is +/-30% and needs min. 1% load on main output to be within regulation band. Ripple and noise is less than 10%. 5. Specifications are for nominal input voltage, 25 C unless otherwise stated. 6. PSU is supplied with J3, pin-9 and pin-10 shorted to enable main output without remote on/off feature. 7. Derate output power linearly to 80% from 90 VAC to 80 VAC input. 8. For ordering current sharing with OR-ing option add I suffix with the model number. 9. Output to GND- 1500VAC for type BF. 10. The J5(Earth) spade connector can be used for U-Channel option products only. When fan options are required the earth connection provided in the input AC connector should be used (Pin 5 J1) 81
4 Mechanical Specifications AC Input Connector (J1) Tyco: Mating: EARTH (J5) Molex: Mating: DC Output Connector (J2) 6-32 inches Screw Pan HD Mating: Designed to accept Ring Tongue Terminal AMP : , wherein one 16 AWG(max) wire can be crimped. Note : One Ring Tongue Terminal with 16 AWG is recommended for current upto 11A only. Use multiple tongue terminals with wire for more current. Signal Connector (J3) Molex: Mating: ; Pins: Dimensions 4.0 x 6.5 x 1.61 inches (101.6 x x 41.0 mm) Weight 900 gm EMC Parameter Conducted Emissions Radiated Emissions Input Current Harmonics Voltage Fluctuation and Flicker ESD Immunity Radiated Field Immunity Electrical Fast Transient Immunity Surge Immunity Conducted Immunity Magnetic Field Immunity Voltage dips, interruptions Conditions/Description EN B,CISPR22-B, FCC PART15-B EN B EN EN EN EN EN EN EN EN EN Safety Criteria Pass Pass Class D Pass Level 4, Criterion A Level 3, Criterion A Level 3, Criterion A Level 3, Criterion A Level 3, Criterion A Level 4, Criterion A Criterion A & B CE Mark Complies with LVD Directive Approval Agency Nemko, UL, C-UL Safety Standard(s) EN , IEC (ed.3), ANSI / AAMI ES , CSA C22.2 No Safety File Number(s) NEMKO: P , NO79068 UL: E Signal(s) Power Good Signal Remote Sense Remote on/off TTL signal goes high after main output is within regulation band, delay is 0.1 to 0.3 s Compensates for 200 mv drop To turn on PSU short remote pin to ground 4 Innovations in Power
5 Derating Curve (From 90 V to 264 V AC I/P) Convection load: 155W up to 40 C De-rate above % per C Forced air cooled load : 275W up to 40 C De-rate above % per C Convection load: 250W up to 40 C De-rate above % per C Forced air cooled load : 450W up to 40 C De-rate above % per C Convection load: 300W up to 50 C De-rate above % per C Forced air cooled load : 450W up to 50 C De-rate above % per C 83
6 Mechanical Drawing 6 Innovations in Power
7 Mechanical Drawing 85
8 Mechanical Drawing 8 Innovations in Power
9 Installtion instruction for current sharing: During the installation and setup of parallel supplies in a system it is important that a single remote sense point be used for all the supplies. The remote sense voltage between the supplies must be adjusted to within 2% to ensure the supplies are inside the 3% capture window. If the supplies are not initially adjusted inside the capture window the supplies will not current share. Note: CURRENT SHARING facility is inclusive with the unit only with ordering of the CURRENT SHARING option unit i.e. LFWLT450-1XXX-I or LF(M)WLT450-1XXX-I. Set-Up Procedures: 1. Connect load cables to the outputs of each supply. 2. Connect the remote sense lines to the load in twisted style. (A common remote sense point must be used for all the supplies in parallel). 3. Connect all the current share pins on the J3 connector between the supplies. 4. Adjust remote sense voltage of each supply to within 1% of rated output voltage or readjust to required set point. (Adjustment to be done with all other parallel supplies off). 5. Current sharing between the supplies can be verified by monitoring the output current of each supply with a hall effect DC current probe. The supplies should share to within 10% of the total load current. 6. The current share circuit has a capture window voltage of +/- 3% of the rated output voltage. If the output remote sense voltage of one of the supplies is adjusted outside the 3% window the supplies will not current share. 87
Electrical Specifications
300 Watt Industrial Features 3 x 5 x 1.5 inches Wide range AC input EMI Class B CE marked to LVD Class 1 & Class 2 options Input Voltage Input Frequency Electrical Specifications 90-264 VAC/120-390 VDC,
These medical power supplies are ideal for monitoring, home health equipment as well as surgical devices.
The ABC450 Series of open-frame power supplies, with its wide universal 90-264 VAC input range and high power density, is available at 450 W of output power and a variety of single and multiple output
150 Watt Industrial (WLT)
150 Watt Industrial (WLT) Features 4 x 2 x 1.3 inches form factor 150 W with forced-air cooling Class 1 & Class 2 options 12 V @ 0.5 A fan voltage auxiliary output High efficiency > 86% Low conducted and
Electrical Specifications VAC/390 VDC, Universal (Derate from 100% at 115VAC to 78% at 90VAC)
MWLC550 Medical Features 5 x 3 x 1.5 Inches Form factor Up to 550 Watts with Forced Air Cooled Efficiencies up to 92% -40 to 70 degree operating temperature* 12V / 0.5A Fan Output, Thermal Shut-Down feature
Electrical Specifications. Input Current 115 VAC: 1.2 A max. 230 VAC: 0.65 A max.
WLP120 Industrial Features 3 x 2 foot print Height 1 above PCB 120 Watts with Forced Air Cooling Efficiencies upto 93% -40 to 70 degree operating temperature Thermal Shut-Down feature >3.00m Hours, Telcordia-SR332-issue
The MBC550 range is ideally suited to a wide variety of medical applications, and also where airflow is limited or not available.
The MBC550 Series of open frame medical power supplies feature a wide universal AC input range of 90 264 VAC, offering up to 550 W of output power with forced air cooling, or 250 W with conduction cooling
These power supplies are ideal for telecom, datacom, industrial equipment and other applications.
The ABC350 Series of open frame power supplies feature a wide universal AC input range of 90 264 VAC, offering 350 W of output power in a compact 3 x 5 x 1 inch footprint, with a variety of isolated single
These medical power supplies are ideal for, monitoring, home health equipment as well as surgical devices.
The MBC40 Series of open-frame medical power supplies, with its wide universal 90-264 VAC input range, is available at 40 W of output power and a variety of single and multiple output voltages. The MBC
These power supplies are ideal for medical, telecom, datacom, industrial equipment and other applications.
The MBC75 Series of open frame medical power supplies feature a wide universal AC input range of 85 V 264 VAC, offering 75 W of output power in a compact footprint, with a variety of isolated single output
3 x 2 x 0.75 Inches Form factor. PCB Mount option available. 40 Watts Convection. Approved to EN/IEC Efficiencies 85% Typical
The MBC41 Series of ultra-low open frame medical power supplies feature a wide universal AC input range of 85 V 264 VAC, offering output power 40 W with natural convection cooling. They are available in
These power supplies are ideal for medical, telecom, datacom, industrial equipment and other applications.
The ABC550 Series of open frame power supplies feature a wide universal AC input range of 90 264 VAC, offering up to 550 W of output power with forced air cooling, or 250 W with conduction cooling in a
5 x 3 x 0.75 Inches form factor. 275 Watts with Forced Air Cooling. Efficiencies up to 92% Standby Power < 0.5 W
The ABC275 Series of ultra low profile open frame power supplies feature a wide universal AC input range of 80 264 VAC, offering output power 275 W with 13 CFM forced air cooling, or up to 160 W with convection
ABC Series power supplies are ideal for telecom, datacom, industrial equipment and other applications.
The ABC120 Series of open frame power supplies feature a wide universal AC input range of 85 V 264 VAC, offering 120 W of output power in a compact footprint, with a variety of isolated single output voltages.
ABC Series power supplies are ideal for telecom, datacom, industrial equipment and other applications.
The ABC75 Series of open frame power supplies feature a wide universal AC input range of 85 V 264 VAC, offering 75 W of output power in a compact 3 x 2 x 1 inch footprint, with a variety of isolated single
3 x 2 x 0.75 Inches Form factor. PCB Mount option available. 40 Watts Convection. Approved to EN/IEC Efficiencies 85% Typical
The ABC41 Series of ultra low open frame power supplies feature a wide universal AC input range of 85 V 264 VAC, offering output power 40 W with natural convection cooling. They are available in a variety
These power supplies are ideal for medical, telecom, datacom, industrial equipment and other applications.
The MBC75 Series of open frame medical power supplies feature a wide universal AC input range of 85 V 264 VAC, offering 75 W of output power in a compact footprint, with a variety of isolated single output
Medical Safety Approvals (-M versions) Industrial Heavy Duty Terminals. Output Power up to 1500 W. High Power Density - 18W/in 3
HPU1K5 Series Low Profile 1.7 (43.2 mm), Industrial Supply Medical Safety Approvals (-M versions) Industrial Heavy Duty Terminals Output Power up to 1500 W Load dependant variable speed fans for audible
LFWLP W 12V 15.00A 25.00A 92%
WLP350 Series 350 Watts Low profile 1 5 x 3 footprint 200W / 350W Fan Up to 94% efficient Cover kits available EN55032 Level B conducted & radiated 5 Year warranty The LFWLP350 series of low profile, open
NLP65 SERIES 75 Watt Open Frame Power Supply Measures: 5.00 x 3.00 x 1.26
Total Power: 65-75 W Input Voltage: 85-264 VAC 120-370 VDC* # of Outputs: Single, dual, triple SPECIAL FEATURES Universal Input 3 x 5 footprint Low profile fits 1U applications EN61000-3-2 compliance option
General. Environmental. EMC & Safety
65// Watts ECS Series IT & Medical Safety Approvals xppower.com 65// W - Ratings Class I & Class II Construction Industry Standard 2 x 4 Package
DSA150 Series. xxx Series. 150 Watts. AC-DC Power Supplies. Models & Ratings. Mechanical Details 3.92 (99.8) 2.18 (55.5) 4.92 (125.
15 Watts xxx Series Ultra Slim Design 15% Peak Load for 3 seconds Ambient Operation from -1 C to +7 C High Efficiency Selectable Overload Characteristic Selectable Remote Inhibit or Enable 3 Year Warranty
Electrical Specifications. Adjustment range Main output ± 5% Total regulation (line and load) ± 2.0% ± 5.0% Turn-on 120 Vac Input 2.0 s max.
POWER Data Sheet NLP250 Series Single Output Total Power: 250 W Input Voltage: 85-264 Vac # of Outputs: Single SPECIAL FEATURES Active PFC and EN61000-3-2 compliant 250 W on main channel with forced air
LCL Series. SIngle Output Industrial Supplies. High Efficiency. Low Cost. 150 W Convection Cooled. 300 W & 500 W with Internal Fans
LCL Series SIngle Output Industrial Supplies High Efficiency Low Cost 150 W Convection Cooled 300 W & 500 W with Internal Fans Outputs form 12 V to 48 V 3 Year Warranty The LCL series is a low cost chassis
IMA 400 Watts Power Supply Series. for medical and industrial applications. Product data sheet
IMA 400 Watts Power Supply Series for medical and industrial applications Product data sheet 400 Watts Power Supply Series for medical and industrial applications Features Safety rated for Medical, Industrial
IMA 600 Watts Power Supply Series. for medical and industrial applications. Product datasheet
IMA 600 Watts Power Supply Series for medical and industrial applications Product datasheet 600 Watts Power Supply Series for medical and industrial applications Features Safety rated for Medical, Industrial
IMA 1000 Watts Power Supply Series. for medical and industrial applications. Product data sheet
IMA 1000 Watts Power Supply Series for medical and industrial applications Product data sheet Features 1000 Watts Power Supply Series for medical and industrial applications Safety rated for Medical, Industrial
PEAK OUTPUT CURRENT 1. MAP V 4.7V to 5.8V 8A 11A 0.2% ±1% 1% 4.9V to 5.1V PEAK OUTPUT CURRENT 4 LINE REGULATION
The Bel Power Solutions MAP30/40/42 Series of power supplies combines low cost and universal input in a board-only power solution to meet commercial and industrial requirements. Full international safety,
C B. Models. Models 2MOPP
AC/DC Medical Power Supplies High power density 3" x 5" open frame medical power supply 450 Watt with forced air cooling 320 Watt convection cooled without derating up to 50 C Medical certification to
DSR120 Series. xxx Series. 120 Watts. AC-DC Power Supplies. Models & Ratings. Mechanical Details
120 Watts xxx Series Ultra Slim Design - 32 mm 150% Peak Load for 3 seconds Ambient Operation from -25 C to +70 C Full Load at 60 C (24V/48V) High Efficiency - Up to 92% Volt-Free Contact for OK Selectable
NLP40 SERIES 50 Watt Open Frame Power Supply Measures: 4.25 x 2.50 x 1.15
Total Power: 40-50 W Input Voltage: 90-264 VAC 120-370 VDC # of Outputs: Single, dual, triple SPECIAL FEATURES 4.25 x 2.5 x 1.15 inch package (1U applications) Universal input Overvoltage and short circuit
All specifications valid at normal input voltage, full load and +25 C after warm-up time unless otherwise stated.
KEY FEATURES Open Frame Switching Power Supply Remote ON/OFF Function 240 Watt with Free Air Convection 500 Watt with 30CFM FAN Built-in 12V/0.3A Auxiliary Output Standby 5V@1A with Fan, @0.4A without
Model and Output Power Output Nominal Voltage Package Option Means of Protection Grade. 12 V DC: -US12 Open Frame: -OF. 24 V DC: -US24 U-Chassis: -UC
2XMOPP MEDICAL, 400 W ACDC COMPACT, EFFICIENT POWER SUPPLY MDP400 SERIES DESCRIPTION The MDP400 series of medical ACDC power supplies feature a compact form factor, high conversion efficiency and 2x MoPP
PDAM500 Series 500W Power Supply
UL / IEC / EN 60601 3.1 Edition & UL / IEC / EN 60950 AM2 Safety Approvals High power density: 500W in 3 x 5 footprint Open Frame or Enclosed Versions Available Remote ON/OFF Function Built-in 12V/0.3A
ECP225-A Series. 225 Watts. AC-DC Power Supplies. Models & Ratings
ECP225- Series C-DC Power Supplies 225 Watts Low Profile High Power Density 3 by 5.0 Footprint 50 W Convection/ 225 W Force Cooled Ratings 5 V Standby and 2 V Fan Outputs Medical and ITE pprovals High
Watts HCP Series
ACDC 6 Watts HCP Series High Efficiency up to 9% xppower.com High Power Density Programmable Output Voltage (%%) Programmable (%%) Parallel Operation Fully Featured Signals & Controls Year Warranty Specification
All specifications valid at normal input voltage, full load and +25 C after warm-up time unless otherwise stated.
DPO-500 KEY FEATURES Open Frame Switching Power Supply Remote ON/OFF Function 240 Watt with Free Air Convection 500 Watt with 30CFM FAN Built-in 12V/0.3A Auxiliary Output Standby 5V@1A with Fan, @0.6A
LB115S 115W Single Output
Features Small size of 2 x 4 x 1.3 75W convection cooled/115 Watts with 200 LFM Universal Input 90-264Vac Meets EN55015 Conducted EMI Meets IEC61000-3-2 Class C for less than 1 Watt to full power Approved
IP67 DESCRIPTION KEY FEATURES MARKET SEGMENT AND APPLICATIONS TRC ELECTRONICS, INC
DESCRIPTION DDP400HV is a series of high efficiency, small form factor AC DC power supplies operating at 277/347/480V AC inputs. The series provides a steady 400 W of regulated DC power through the full
Output Voltage (Vfan) & Current
C-DC Power Supplies 50/80/250/350 Watts Convection/Forced-cooled Ratings Universal 85-264 VC Input IT & Medical Safey pprovals (Class I & II) < 0.5 W Standby Power (50 & 80 Models) -40 C to +70 C Operation
DDP400 SERIES KEY FEATURES DESCRIPTION MARKET SEGMENTS AND APPLICATIONS
400 W ACDC COMPACT, EFFICIENT POWER SUPPLY DDP400 SERIES KEY FEATURES Universal input voltage range (85 264 V AC ) Active PFC, EN 6100032 Class C, D compliant Steady 400W output power (440 W peak) INDUS
POWER. CPS250-M Series. 250 Watt AC-DC Power Supplies. Data Sheet. Total Power: 250 Watts Input Voltage: V # of Outputs: Single
POWER Data Sheet CPS50-M Series 50 Watt AC-DC Power Supplies Total Power: 50 Watts Input Voltage: 90-64 V # of Outputs: Single SPECIAL FEATURES Designed for forced air and natural convection cooling Medical
M A D 65 U S 12 B - PART NUMBER STRUCTURE Page 1. P-DUKE Technology Co., Ltd.
Medical Automation Datacom IPC Industry Measurement Telecom Automobile Boat Charger PV Railway PART NUMBER STRUCTURE M A D 65 U S 12 B - Application Package Dimension Output Input Output Output Protection
PART NUMBER STRUCTURE. P-DUKE Technology Co., Ltd Page 1
Medical Automation Datacom IPC Industry Measurement Telecom Automobile Boat Charger PV Railway PART NUMBER STRUCTURE M A D 40 U S 12 B - Application Package Dimension Output Input Output Output Protection
Output Voltage (Vfan) Convection-cooled (6,7) Forced-cooled (8) & Current
C-DC Power Supplies 5/8/25/35 Watts Convection/Forced-cooled Ratings Universal 85-264 VC Input IT & Medical Safety pprovals (Class I & II)
420 W High Line Output Power. Rugged Industrial Construction. -40 C to +70 C Operation. 5 V Standby. Screw Terminals. SEMI F47 Compliant
SHP350 Series 420 W High Line Output Power Rugged Industrial Construction Variable Speed Fan for Noise Reduction -40 C to +70 C Operation AC OK, Remote On/Off and Active Current Share Screw Terminals SEMI
MB120S 120W Single Output Medical Series
Features 2 x 4 x 1.25 Package, Ideal for 1U Applications 10-year Life design with Premium E-Caps 100 Watts convection cooled Class B Conducted and Radiated EMI performance BF Isolation Type Rated Designed
Electrical Specifications
POWER Data Sheet NLP65 Series Single, Dual and Triple Output Total Power: 65-75 W Input Voltage: 85-264 Vac 120-370 Vdc* # of Outputs: Single, dual, triple SPECIAL FEATURES Universal input 3 x 5 footprint
MVAB120 Series 120W 2" x 4" AC-DC Power Supply Converter
www.murata-ps.com MVAB120 Series FEATURES ITE (2nd) and Medical 3rd ed. 1MOPP (primarysecondary) safety approved 120W compact high density 2" x 4" standard footprint High effi ciency up to 91% Universal
ECC100 Series. -40 ºC to +75 ºC Operation. 100 W - Baseplate Cooled. High Efficiency Resonant Topology. Screw Terminals Available.
ECC100 Series -40 ºC to +75 ºC Operation 100 W - Baseplate Cooled High Efficiency Resonant Topology Screw Terminals Available 5V Standby Output Remote On/Off & Power OK Signal 3 Year Warranty The ECC100
solo Ultra-high efficiency 1U size Xsolo Single Output Power Supply 500W W 2 FEATURES APPLICATIONS INCLUDE
XS XS solo Ultra-high efficiency 1U size FEATURES The family of single output power supplies provides up to an incredible 1008W in an extremely compact package. Single output: 24V, 36V or 48V IEC60950
CLP0205 Open Frame Power Supply Vac input; 5Vdc output; 200W Output Power; 0.25A stdby
; 12Vout @ 0.25A stdby Applications Industrial equipment LED Signage Telecommunications equipment Description Features Compact size 50.8mm x 101.6mm x 36.1mm (2in x 4in x 1.4in) with density of 18W/in
MAD40 MULTI -OUTPUT SERIES OPP SCP OVP. 2 X 3.5 Inch AC-DC POWER SUPPLIES. UNIVERSAL INPUT RANGE UP TO 40Watts PART NUMBER STRUCTURE LOW CROSS REG.
MAD40 MULTI -OUTPUT SERIES 2 X 3.5 Inch AC-DC POWER SUPPLIES UNIVERSAL INPUT RANGE UP TO 40Watts FEATURES 0.15 WATT LOW STANDBY POWER CONSUMPTION ULTRA LOW CROSS REGULATION UNDER 1.5 WIDE INPUT VOLTAGE
Model Vnom Power Description Set Point Dynamic Vtrim Imax Remote Power (V) (W) Adjust Range (V) Range (V) (A) Sense Good
XS XS Xsolo 400W-800W solo Ultra-high efficiency 1U size FEATURES Single output: 24V or 48V EN60950 2 nd Edition & EN60601-1 2 nd and 3 rd Edition Ultra high efficiency, >92% Low profile: 1U height (40mm)
VOF XX - XXX - X
date 01/31/018 page 1 of 10 SERIES: VOF-300 DESCRIPTION: AC-DC POWER SUPPLY FEATURES up to 300W continuous power universal input voltage range industry standard 3 x 5 footprint power factor correction
Model Vnom Power Description Set Point Dynamic Vtrim Imax Remote Power (V) (W) Adjust Range (V) Range (V) (A) Sense Good
XS XS 400W-800W solo Ultra-high efficiency 1U size FEATURES Single output: 24V or 48V EN60950 2 nd Edition & EN60601-1 2 nd and 3 rd Edition Ultra high efficiency, >92% Low profile: 1U height (40mm) Convection
CLP0112 Open Frame Power Supply Vac input; 12Vdc output; 150W Output Power
Applications Telecommunications equipment Embedded Computing Storage Systems Industrial equipment Features Compact size 50.8 mm x 101.6 mm x 36.1 mm (2 in x 4 in x 1.4 in) with density of 13.4W/in 3 Universal
POWER. CPS250-M Series. 250 Watt AC-DC Power Supplies. Data Sheet. Total Power: 250 Watts Input Voltage: V # of Outputs: Single
POWER Data Sheet CPS50-M Series 50 Watt AC-DC Power Supplies Total Power: 50 Watts Input Voltage: 90-6 V # of Outputs: Single SPECIAL FEATURES Designed for forced air and natural convection cooling Medical
DDP400 and MDP400, SC series, are sealed, full potted, compact, high efficiency, small form factor AC-DC power supplies.
KEY FEATURES Universal input voltage range (90 264 V AC ) Input surge current limiting 400 W rated power (440 W peak up to 10 s) High efficiency up to 94% Low standby consumption (
XSOLO ULTRA-COMPACT, HIGH-EFFICIENCY 500 W AND 1000 W SINGLE OUTPUT POWER SUPPLIES
XSOLO ULTRA-COMPACT, HIGH-EFFICIENCY 500 W AND 1000 W SINGLE OUTPUT POWER SUPPLIES Advanced Energy's Xsolo series, part of our low voltage solutions, delivers an incredible convection-cooled 504 W in an
TB65 65W Single Output Test and Measurement/Industrial Series
Features 2.0 x 3.5 x 1.3 Package TB65 Up to 65W Convection Cooled Output Power Compliant to high levels of EMC per EN61000-4 15kV ESD (Air), 8kV (Contact) 4kV Surge Meets Class B Conducted EMI with 6db
General. Environmental. EMC & Safety
AC-DC 400-2500 Watts f lexpower Series Configurable for Fast Time to Market SEMI F47 Compliant xppower.com Flexible Series & Parallel Capability -20 C Operation Extra Power Available at High Line Optional
Electrical Specifications
POWER Data Sheet NFS110 Medical Series Single and quad output Total Power: 80-110 W Input Voltage: 100-240Vac 127-357 Vdc # of Outputs: Single, quad Special Features 7.0 x 4.25 x 1.8 inch package Medical,
Compliance. Safety Approvals USA Canada Europe. Isolation: General. Dimensions. AC Input CN1 Output CN2 Optional CN3. Weight
IEC 1-1-2 4th Edition Compliant BF (Body Floating) Rated Class II Construction for Home Health Care Applications Class I With Functional Ground Connection 3 x 5 Footprint ua @ 264VAC Earth Leakage Current
70 Watt Switching Medical Grade Switching Power Supply with Active PFC CONTENTS 1. GENERAL CIRCUIT TOPOLOGY...2
SNP-Z077 Specification Page 1 of 7 70 Watt Switching Medical Grade Switching Power Supply with Active PFC CONTENTS 1. GENERAL...2 2. CIRCUIT TOPOLOGY...2 3. AC INPUT...2 3.1. INPUT VOLTAGE...2 3.2. INPUT
PART NUMBER STRUCTURE. P-DUKE Technology Co., Ltd Page 1. Automation Datacom IPC. Industry Measurement Telecom
Automation Datacom IPC Industry Measurement Telecom Automobile Boat Charger Medical PV Railway PART NUMBER STRUCTURE TAD 65 U B - xx yy - Series Name Output Input Output Output Output Output Output Protection
Features. Regulated Converters. RACM Watt Enclosed Case Style Single Output. RACM150- S/ _ Fan Option (1) Single. AC/DC Converter.
Features Regulated Converters Description Long 5 Year Warranty 2MOPP/250VAC Suitable for built in Class II Applications Wide Input Voltage Range (85-264VAC) Low Leakage Current (
VP ELECTRONIQUE MASSY - Tel:
KEY FEATURES Switching Power Module for PCB Mountable Fully Encapsulated Plastic Case Universal Input Range 90-264VAC, 47-440 Hz Regulated Low Ripple and Noise Small Size But Higher Wattage Screw Terminal
MTC Series 15 W AC/DC Switching Power Supply Module Medical
Switching Power Modules for PCB Mounting Fully Encapsulated Plastic Case Universal Input Range 90-264VAC, 47-440 Hz Regulated Low Ripple and Noise & High Efficiency Isolation class II UL60601-1 / IEC60601-1
All specifications valid at normal input voltage, full load and +25 C after warm-up time unless otherwise stated.
KEY FEATURES Din Rail Switching Power Supply 180 Watt with 18CFM FAN for 12V to 48V Output Voltage 150 Watt with 30CFM FAN for 5V Output Voltage High Efficiency up to 93% Universal Input: 90-264 VAC Low
The MPB150 product line is approved to the latest international regulatory standards, and displays the CE Mark.
The MPB150 Series incorporates patented high efficiency circuitry, high power density and active Power Factor Correction (PFC) to meet the requirements of networking and data communications systems, as
Electrical Specifications
Single & Quad output 1 of 5 Total Power: 80-110 W Input Voltage: 85-264 Vac 120-370 Vdc # of Outputs: Single, quad Special Features 7.0 x 4.25 x 1.8 inch package Overvoltage and short circuit protection
Features. Regulated Converters. RACM40 40 Watt Enclosed & Open Frame Case Style Single Output RACM40- S / - AC/DC Converter.
Features Regulated Converters Description Long 5 Year Warranty 2MOPP/250VAC Suitable for built in Class II Applications Wide Input Voltage Range (85-264VAC) Low Leakage Current (
Model Selection Model Output Current Total OVP Number Class Volts (Convection Cooled) Efficiency 1 Ripple &Noise 2 Regulation Threshold
Features 2 x 3.5 x 1.3 Package, Ideal for 1U Applications 10-year life design with Premium E-Caps 65 Watts convection cooled Class I and Class II models Class B Conducted and Radiated EMI Performance BF
PART NUMBER STRUCTURE. P-DUKE Technology Co., Ltd Page 1
Medical Automation Datacom IPC Industry Measurement Telecom Automobile Boat Charger PV Railway PART NUMBER STRUCTURE M A D 30 U S 12 B - Application Package Dimension Output Input Output Output Protection
POWER. NLP40 Series. Single, Dual and Triple Output. Data Sheet
POWER Data Sheet NLP40 Series Single, Dual and Triple Output Total Power: 40-50 W Input Voltage: 90-264 Vac 120-370 Vdc # of Outputs: Single, dual, triple SPECIAL FEATURES 4.25 x 2.5 x 1.15 inch package
AC-DC ITE & Medical Switching Power Supply
KEY FEATURES U Bracket Medical Switching Power Supply Remote ON/OFF Function 200 Watt with Free Air Convection 500 Watt with 30CFM FAN Built-in 12V/0.3A Auxiliary Standby 5V@1A with Fan, @0.4A without
CLP0224 Open Frame Power Supply Vac input; 24Vdc output; 200W Output Power
Applications Industrial equipment Telecommunications equipment Features Compact size 50.8 mm x 101.6 mm x 37.25 mm (2 in x 4 in x 1.47 in) with density of 18 W/in 3 Universal AC Input Range (90 264VAC)
1000W Single Output Medical Type. MSP-1000 series. File Name:MSP-1000-SPEC
000W Single Output Medical Type MSP-000 series File Name:MSP-000-SPEC 08-05-04 000W Single Output Medical Type MSP-000 series SPECIFICATION MODEL MSP-000- MSP-000-5 MSP-000-4 MSP-000-48 DC VOLTAGE V 5V
PART NUMBER STRUCTURE. P-DUKE Technology Co., Ltd Page 1
Medical Automation Datacom IPC Industry Measurement Telecom Automobile Boat Charger PV Railway PART NUMBER STRUCTURE M S D 30 U S 12 B - T Application Package Dimension Output Input Output Output Protection
Single-output models feature wide-range output adjustability to meet a wide variety of standard and user-specific output voltage requirements.
Bel Power Solutions MAP55 Series of power supplies provides reliable, tightly-regulated DC power for commercial and industrial systems. Wide-range AC input and full international safety, EMI, and ESD compliance
3 in 1 Dimmable (0-10Vdc, PWM signal, or resistance)
FEATURES: AC Input 100~277VAC Built-in Active PFC Function Protection: SCP / OVP / OTP 12V Auxiliary Output Built-in 3 in 1 dimming function (0-10Vdc, 10V PWM signal, or resistance) Power saving < 0.35W
All specifications valid at normal input voltage, full load and +25 C after warm-up time unless otherwise stated.
KEY FEATURES U Bracket Switching Power Supply Universal Input: 90-264 VAC Active P.F.C. Function, PF>0.95 300W Convection without FAN 480W Convection with 18CFM FAN Protections: Over Load / Over Voltage
DDP400 and MDP400, SC series, are sealed, full potted, compact, high efficiency, small form factor AC-DC power supplies.
SEALED, 400W, IT AND 2XMOPP MEDICAL RATED ACDC POWER SUPPLY KEY FEATURES Universal input voltage range (90 264 V AC ) Input surge current limiting 400 W rated power (440 W peak up to 10 s) High efficiency
18V 35V 65V 40A 60A 1.5W 1.2W ms 40ms. 20ms 20ms
Features DIN Rail Description Universal AC Input (85264VAC) Protections: SCP, OVP, OLP, OTP DC OK Indicator LED with Relay Contacts 5% (8W) peak load capacity Builtin active PFC,PF>,95 High effciency up
Output Power Output Voltage (3) Output Current Total Regulation (2) Efficiency (5) Model Number (1,6) 8 W 3.3 VDC 2.50 A 7% 68% AEL15US03 (4) 12 W
AEL15-80 Series 15-80 Watts Energy Efficiency Level V CEC 2008 and EISA 2007 Compliant Limited Power Source Approval China Compulsory Certification (CCC) Qualified +60 C Operating Temperature Compact Dimensions
The MDU150 Series provides the same benefits as the MPU150 Series, with nominal 48 volt DC input.
The innovative MPU products incorporate Power Factor Correction (PFC) with a low-profile package designed to meet 1U height constraints. The MPU150-4530G and MPU150-4350G provide high current +3.3 V and
TPP 40 Series, 40 Watt. Order code Output voltage Output current max. Efficiency. max. screw terminal pin connector Vout 1 Vout 2 Vout 3
, Features High power density 40 W power supply (enclosed / open frame) 2 x MOPP Medical safety according to AAMI/ANSI ES 60601-1:2005(R) and IEC/EN 60601-1 3rd edition Ready to meet ErP directive, < 0.3
Metal Case Power Supplies
, 120 480 Watt Features Compact U-bracket and enclosed power supplies Screw terminal block Very high efficiency up to 93 % No internal fan for 120 W & 240 W models. Universal input 90 264 VAC Adjustable
HEC-45LTN-45PFAS Rev A
A. Features High Efficiency (Up to 85%). Active Power Factor Correction (Typical 0.96). Isolation Class II. All-Round Protection: OVP/SCP/OPP. Fully isolated plastic case with IP20 and dry location. Class
AC-DC ITE & Medical Switching Power Supply
KEY FEATURES U Bracket Medical Switching Power Supply Cooling by Free Air Convection 160 Watts and 240 Watt with 10CFM Forced Air 4000VAC Input to 2MOPP Insulation High Efficiency up to 94% With P.F.C.
Sirius 250/350 Watts, Single / Multi output AC-DC, modular power solution
Up to 350W Up to 6 outputs Voltages up to 28V, Current up to 50 mps Fast-on output connection Worldwide approvals 3 Year Warranty Sirius 250/350 Watts, Single / Multi output C-DC, modular power solution
HRPG-1000 series. 1000W Single Output with PFC Function. File Name:HRPG-1000-SPEC Sicherheit ID
000W Single Output with PFC Function HRPG-000 series Bauart gepruft Sicherheit egelma ge od o s be wac g www. tuv.com ID 000000000 File Name:HRPG-000-SPEC 08-05-04 000W Single Output with PFC Function
TE60 60W Single Output External Power Test & Measurement/Industrial Series
Features Meets DoE Efficiency Level VI Requirements No load input power Average Efficiency Up to 60W of AC-DC Power Universal Input 90-264Vac Input Range IP22 Rated Enclosure Meets Heavy Industrial Levels
CCH400 & CCH600 Series
CCH4 & CCH6 Series 4 W & 6 W - Baseplate Cooled Compact 8.4 (214 mm) x 4 (12 mm) x 1.69 (43 mm) Package High Efficiency up to 9% -4 C to +85 C Baseplate Operating Temperature No Fan, Quiet Operation MIL-STD-461
For more information, please visit the product page. output. output current max (A)
date 12/12/217 page 1 of 1 SERIES: VMS-2 DESCRIPTION: AC-DC POWER SUPPLY FEATURES compact 2 x 4 high power-density design (CNF version is 2.4 x 4.6 ) universal input range efficiencies up to 93.5% 4th
COMPACT MEDICAL GRADE 365 W AC-DC POWER SUPPLY MFA350 SERIES
COMPCT MEDICL GRDE 365 W CDC POWER SUPPLY MF350 SERIES DS_MF350 SERIES_REV0 _ SEPTEMER 203 DESCRIPTION The MF350 is a series of high efficiency, small form factor and single output CDC power supplies.
Asia-Pacific North America Europe, Middle East Bel Power Solutions, Inc. BCD.
The MPU200/MDU200 Series is based upon the proven architecture of the MPU150/MDU150 product line. The MPU products incorporate Power Factor Correction (PFC) with a low-profile package designed to meet
Output Full Load
SERIES DC-DC CONVERTER 2:1 & 4:1 WIDE INPUT RANGE UP TO 3.3 WATTS FEATURES REINFORCED INSULATION FOR 2VAC WORKING VOLTAGE CLEARANCE AND CREEPAGE DISTANCE :8.0mm/2MOPP 00VAC INPUT TO OUTPUT 2MOPP ISOLATION
Efficiency [%] 115VAC 230VAC. Parameter Condition Value. Line Regulation low line to high line ±0.5% max. Load Regulation 10% to 100% load ±0.5% max.
![Efficiency [%] 115VAC 230VAC. Parameter Condition Value. Line Regulation low line to high line ±0.5% max. Load Regulation 10% to 100% load ±0.5% max.](/thumbs/96/127072968.jpg "Efficiency [%] 115VAC 230VAC. Parameter Condition Value. Line Regulation low line to high line ±0.5% max. Load Regulation 10% to 100% load ±0.5% max.")
Features Regulated Converter Universal Input VAC 3W PCB Mount Package
Features. Regulated Converter RACM Watt Enclosed & Open Frame Case Style Single Output RACM65- S / - AC/DC Converter.
Features Regulated Converter Long 5 year warranty 2MOPP/250VAC Suitable for built in Class II applications Wide input voltage range (85-264VAC) Low leakage current (