Features. Regulated Converters. RAC01-C RAC02-C 1-2 Watt Single Output RAC0_- C. AC/DC Converter

Transcription

1 Features Regulated Converters Description Compact low profile AC-DC power supply mw no load power consumption Class II power supply with kvac isolation Universal input voltage range (~VAC) Low output ripple/noise EN, UL and CE certified The RAC1-SC and RAC-SC series are ultra-compact universal input AC/DC power modules for PCB mounting. They feature high efficiency, low standby power, high operating temperature, soft start and short-circuit protection as well as a built-in EMC Class B filter. Output voltages range from.vdc to VDC. 1- Watt Single Output Selection Guide Part Input Output Output Efficiency Max. Capacitive Number Voltage Range Voltage Current typ Load (1,) [VAC] [VDC] [ma] [%] [µf] RAC1-.SC -. 5 RAC1-5SC RAC1-9SC RAC1-1SC RAC1-15SC RAC1-SC RAC-.SC -. RAC-5SC - 5 RAC-9SC RAC-1SC RAC-15SC RAC-SC Note1: / Hz / Ta=5 C with constant resistive load Note: If / Hz with full load, max. capacitive load is less, please contact techsupportat@recom-power.com for detailed information Model Numbering nom. Output Power () nom. Output Voltage RAC_- C Single Note: 1 for 1 Watt, for Watt * E7 EN9-1 certified UL9-1 certified *EN5-1 certified (only W version) Ordering Examples: RAC1-1SC 1 Watt 1Vout Single Output RAC1-5SC 1 Watt 5Vout Single Output RAC-.SC Watt.Vout Single Output RAC-SC Watt Vout Single Output REV.: 1/18 PA-1

2 BASIC CHARACTERISTICS Parameter Condition Min. Typ. Max. Input Voltage Range () Input Current nom. Vin = Inrush Current <.5ms cold start at 5 C No load Power Consumption VAC 115VDC mw mw Input Frequency Range AC Input 7Hz Hz Minimum Load (5) % Start-up Time Rise Time / ms Hold-up time ms 1.5ms Internal Operating Frequency % load at nominal Vin khz Output Ripple and Noise () MHz BW.Vout all others ms ms VAC VDC ma ma 55mA ma A A 1mVp-p mvp-p Note: Refer to line derating graph on page Note5: Operation below % load won t harm the converter, but specifications may not be met Note: Ripple and Noise is the maximum peak-to-peak voltage value measured at the output with a MHz bandwidth, at rated line voltage and full load Efficiency vs. Load RAC1-5SC RAC1-1SC continued on next page REV.: 1/18 PA-

3 RAC-5SC RAC-1SC Line Derating Input Voltage [VAC] REGULATIONS Parameter Condition Value Output Accuracy ±5.% typ. Line Regulation low line to high line ±.% max. Load Regulation % to % load.% max. continued on next page REV.: 1/18 PA-

4 Deviation vs. Load 1 RAC1-5SC RAC1-1SC RAC-5SC RAC-1SC PROTECTIONS Parameter Type Value Short Circuit Protection (SCP) below mw Hiccup mode, automatic recovery Over Voltage Category Class of Equipment Isolation Voltage I/P to O/P rated for 1 minute kvac Isolation Resistance Isolation Capacitance Insulation Grade Leakage Current Note7: Refer to local wiring regulations if input over-current protection is also required Note8: An external MOV is recommended for operation. The Varistor should comply with IEC-51-. e.g. EPCOS S1 Series OVCII Class II 1GΩ min. pf max. reinforced.5ma max. continued on next page REV.: 1/18 PA-

5 Protection Circuit Circuit for AC/DC Components (RAC s) + > operation L N FUSE U ENVIRONMENTAL Parameter Condition Value Operating Temperature natural convection.1m/s Maximum Case Temperature full load refer to derating graph -5 C to + C -5 C to +75 C -5 C to +85 C Temperature Coefficient +5 C to +75 C.1% C Thermal Impedance.1m/s, horizontal 7 C/W Operating Altitude Operating Humidity non-condensing 95% RH max. Pollution Degree Vibration MTBF Derating Graph (@ Chamber and natural convection.1m/s) according to MIL-HDBK-17F, G.B. +5 C +55 C + C +95 C m PD according to MIL-STD-8F x hours 95 x hours 15 x hours Ambient Temperature [ C] Note9: Start-up is only guaranteed at temperatures down to -5 C; otherwise specifications may not be met REV.: 1/18 PA-5

6 SAFETY AND CERTIFICATIONS Certificate Type (Safety) Report / File Number Standard Information Technology Equipment - General Requirments for Safety 18 EN9-1: + A:1 IEC9-1:5, nd Edition + A:1 Information Technology Equipment - General Requirments for Safety (CB Scheme) L9m-CB-1-B1 IEC9-1:5, nd Edition + A:1 Information Technology Equipment, General Requirements for Safety E7-A5 UL9-1, nd Edition, 7 CSA C. 9-1, nd Edition, 7 Household and similar electrical appliances - Safety - Part 1: General requirements () L9L-B-L EN5-1:1 + A11:1 EAC Safety of Low Voltage Equipment RU-AT TP TC /11 RoHS RoHS-11/5/EU + AM-15/8 EMC Compliance (Industrial) Condition Standard / Criterion Electromagnetic compatibility of multimedia equipment Emission Requirements Information technology equipment - Immunity characteristics - Limits and methods of measurement EN5:15 EN5: + A1:15 ESD Electrostatic discharge immunity test ±8kV air, ±kv contact IEC--:8, Criteria A Radiated, radio-frequency, electromagnetic field immunity test V/m IEC--: + A:, Criteria A Fast Transient and Burst Immunity AC Power Port: ±1.kV IEC--:1, Criteria A Surge Immunity AC Power Port: L-N ±1.kV IEC--5:5, Criteria A Immunity to conducted disturbances, induced by radio-frequency fields AC Power Port Vr.m.s. IEC--:8, Criteria A Voltage Dips and Interruptions Voltage Dips >95% Voltage Dips % Voltage Interruptions >95% Limits of Voltage Fluctuations & Flicker IEC--11:, Criteria A IEC--11:, Criteria A IEC--11:, Criteria C EN--:1 EMC Compliance (Household) only Watt version Condition Standard / Criterion Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 1: Emission Information technology equipment - Immunity characteristics - Limits and methods of measurement EN51-1:+A:11 EN51-:15 ESD Electrostatic discharge immunity test ±8kV air, ±kv contact IEC--:8, Criteria A Radiated, radio-frequency, electromagnetic field immunity test V/m IEC--: + A:, Criteria A Fast Transient and Burst Immunity Surge Immunity AC Power Port: ±1kV DC Output: ±.5kV AC Power Port:L to N ±kv DC Output: L to N ±1kV EC--:1, Criteria A IEC--5:1, Criteria B Immunity to conducted disturbances, induced by radio-frequency fields Vr.m.s. IEC--:1, Criteria A Voltage Dips and Interruptions Voltage Dips >95% Voltage Dips % Voltage Interruptions >95% Limits of Harmonic Current Emissions Limits of Voltage Fluctuations & Flicker Note: series is excluded IEC--11:, Criteria B IEC--11:, Criteria C IEC--11:, Criteria C EN--:1 EN--:1 REV.: 1/18 PA-

7 DIMENSION AND PHYSICAL CHARACTERISTICS Parameter Type Value Material Dimension (LxWxH) Weight Dimension Drawing (mm) case potting PCB black plastic (UL9V-) silicone (UL9V-) FR, (UL9V-1).7 x. x 17.75mm 5g typ..7 embossed logo Bottom View ± Allow 5mm clearance around converter for air circulation Ø. ±.1 Recommended Footprint Details Top View Leave Clear of PCB Traces Pin Connections Pin # Single 1 VAC in (N) VAC in (L) -Vout +Vout Tolerance: xx.x= ±.5mm xx.xx= ±.5mm PACKAGING INFORMATION Parameter Type Value Packaging Dimension (LxWxH) tube 5. x 7. x 8.mm Packaging Quantity pcs Storage Temperature Range - C to + C Storage Humidity non-condensing 95% RH max. The product information and specifications may be subject to changes even without prior written notice.the product has been designed for various applications; its suitability lies in the responsibility of each customer. The products are not authorized for use in safety-critical applications without RECOM s explicit written consent. A safety-critical application is an application where a failure may reasonably be expected to endanger or cause loss of life, inflict bodily harm or damage property. The applicant shall indemnify and hold harmless RECOM, its affiliated companies and its representatives against any damage claims in connection with the unauthorized use of RECOM products in such safety-critical applications. REV.: 1/18 PA-7