MODEL T10815 GRINDING ATTACHMENTS INSTRUCTIONS
|
|
- Gordon Watkins
- 6 years ago
- Views:
Transcription
1 MODEL T10815 GRINDING ATTACHMENTS INSTRUCTIONS For questions or help with this product contact Tech Support at (570) or Introduction Designed to work exclusively with the T10814 Tool Grinder, the Model T10815 Grinding Attachments Kit includes three attachments for sharpening different types of tools: end mills and reamers, lathe tools, and drill bits. Inventory Operation End Mill & Reamer Attachment This attachment mounts on the cross-slide bedway of the T10814 index It is equipped with an adjustable index pin for precise tool alignment when side-grinding or end-grinding. It also includes a stop collar to control depth of movement during grinding operations. A B C Tools Needed Qty Hex Wrench 4mm... 1 Hex Wrench 5mm... 1 To use end mill and reamer attachment: Figure 1. Model T10815 components. Description Qty A. End Mill & Reamer Attachment... 1 B. Handwheel... 1 C. Lathe Tool Attachment... 1 D. Drill Bit Attachment... 1 D 1. DISCONNECT MACHINE FROM POWER! 2. Insert attachment into cross-slide dovetails on T10814 Tool Grinder (see Figure 2), and secure with cross-slide gib lock on index Index Bracket Damage to your eyes, lungs, and ears could result from using this item without proper protective gear, such as safety glasses, a respirator, and hearing protection. Cross Slide Gib Lock Figure 2. End mill and reamer attachment mounted in cross-slide bedway on T10814 index COPYRIGHT NOVEMBER, 2014 BY GRIZZLY INDUSTRIAL, INC. NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC. #MN16650 PRINTED IN CHINA V
2 3. Insert end mill into collet size closest to shank diameter. The T10814 Tool Grinder comes with five collets. 4. Place collet in quill (see Figure 3). Collet 6. Align index pin with end mill by positioning pin at top of flute (see Figure 5), then secure pin by tightening cap screws with 5mm hex wrench. Note: For end-grinding and side-grinding operations, index pin provides a fixed point of reference to achieve the same grinding angle on each cutting edge. Cap Screws Quill Index Pin Figure 3. Collet and workpiece installed in quill. Note: Interior of quill has a pin that must be aligned with slot in collet (see Figure 4). Collet Slot End Mill Flute Figure 5. Index pin aligned with top of flute. 7. Using 4mm hex wrench, loosen cap screw on quill stop collar (see Figure 6) and position for maximum depth of operation. This position will vary with each tool, and finding it is a process of trial and error. Adjust stop collar until satisfied with depth of movement. Quill Stop Collar Figure 4. Collet slot must be aligned with pin inside of quill. 5. Thread handwheel onto end of collet and tighten. Cap Screw Figure 6. Stop collar positioned on quill for depth of operation. 8. Adjust T10814 index bracket controls and carriage slides to position end mill at correct angle for grinding operation. End mill should be approximately 2mm from face of grinding wheel. -2- T10815 Grinding Attachments (Mfd. 4/14)
3 Note: See T10814 owner's manual for detailed instructions on how to operate index 9. Turn machine ON. 10. Rotate T10814 spindle handwheel (see Figure 7) toward you to move grinding wheel against end mill. T10814 Spindle Handwheel Lathe Tool Attachment This attachment mounts on the cross-slide bedway of the T10814 index bracket and uses an adjustment wheel to fine-tune the positioning of the cross slide. It also includes two 5mm cap screws to secure lathe tools for grinding operations. Tools Needed Qty Hex Wrench 5mm... 1 To use lathe tool attachment: 1. DISCONNECT MACHINE FROM POWER! 2. Insert attachment into cross-slide dovetails on T10814 Tool Grinder index bracket (see Figure 8). Ensure that cross-slide adjustment nut slides into bedway guide. Secure by tightening guide screw. Figure 7. Location of spindle handwheel on T10814 Tool Grinder. If end-grinding, sharpen one cutting face, rotate spindle handwheel counterclockwise to disengage grinding wheel from end mill. Then rotate attachment quill to next flute and repeat grinding procedure until each cutting face has been sharpened. If side-grinding, turn attachment quill clockwise, ensuring that end mill flute follows index pin through length of cut. Rotate spindle handwheel counterclockwise to disengage grinding wheel from end mill, then rotate attachment quill to top of next flute and repeat grinding procedure until each cutting edge has been sharpened. Cross-Slide Bedway Guide Screw Adjustment Nut Figure 8. Lathe cutting tool attachment installed in cross-slide on T10814 index 11. Continue until desired finish is achieved. 12. Turn spindle handwheel counterclockwise to disengage grinding wheel from end mill, then turn machine OFF. 13. Unscrew quill handwheel and remove workpiece. T10815 Grinding Attachments (Mfd. 4/14) -3-
4 5. Turn machine ON. Always ensure that workpiece is held securely by BOTH cap screws on lathe attachment. Failure to do so could result in lathe cutting tool being ejected from attachment during grinding operation, resulting in serious injury to operator and bystanders. 6. Rotate T10814 spindle handwheel (see Figure 7 on previous page) clockwise to move grinding wheel against lathe cutting tool, as shown in Figure Install lathe cutting tool in attachment (see Figure 9) with cutting edge oriented vertically. Secure by tightening two cap screws. Depending on size of lathe cutting tool, it may be necessary to use steel shims to ensure cap screws are able to tighten against the tool. Cap Screws Figure 10. Lathe cutting tool positioned for grinding operation. 7. Once desired finish is achieved, turn spindle handwheel counterclockwise to disengage grinding wheel from lathe tool, then turn machine OFF. Lathe Cutting Tool 8. Loosen cap screws securing lathe cutting tool and remove it from attachment. Figure 9. Lathe cutting tool installed in attachment. 4. Adjust T10814 index bracket controls and carriage slides to position lathe cutting tool at correct angle for grinding operation. Tip of lathe cutting tool should be approximately 2mm from face of grinding wheel. Note: See T10814 owner's manual for detailed instructions on how to operate index -4- T10815 Grinding Attachments (Mfd. 4/14)
5 Drill Bit Attachment This attachment mounts in the index head quill included with the T10814 Tool Grinder. It can accommodate drill bits from 3 18mm. Tools Needed Qty Hex Wrenches 2.5, 4, 5mm... 1 EA. To use drill bit attachment: 1. DISCONNECT MACHINE FROM POWER! 2. Make sure index head on T10814 Tool Grinder is installed on index 4. Loosen cap screw on rotating base, then slide collet locating pin into collet (see Figure 12). The smaller locating pin on attachment slides into cross-slide base. Note: The index pin on the T10814 index head must be removed before the cross-slide locating pin on the drill bit attachment can be inserted. Cap Screw 3. Insert 12mm collet into index head quill on T10814 Tool Grinder (see Figure 11). T10814 Index Head Quill Cross Slide Locating Pin Collet Locating Pin Figure 12. Locating pins and rotating base cap screw on drill bit attachment. 5. Tighten handwheel on index head quill to secure attachment in collet. 12mm Collet Figure mm collet installed in T10814 index head quill. 6. Place drill bit in V-guide so that bit extends approximately 0.02" (0.5mm) beyond tip of attachment (see Figure 13). V Guide Sliding Swivel Clamp Figure 13. Drill bit should extend 0.02" (0.5mm) beyond tip of attachment. T10815 Grinding Attachments (Mfd. 4/14) -5-
6 7. Secure sliding swivel clamp at base of drill bit. 8. Position drill bit so that index plate sits just inside flute (see Figure 14), then tighten index plate set screw. Index Plate 11. Adjust T10814 index bracket controls and carriage slides to position drill bit at correct angle for grinding operation. Because the cutting edge of the drill bit is rounded, you must rotate the attachment side to side across the face of the grinding wheel during operation. Note: See T10814 owner's manual for detailed instructions on how to operate index 12. Turn machine ON. Set Screw 13. With drill bit positioned approximately 2mm from grinding wheel, rotate T10814 spindle handwheel (see Figure 7 on Page 3) clockwise to move grinding wheel against drill bit, as shown in Figure 16. Figure 14. Index plate positioned just inside drill bit flute. 9. Position drill bit clamp as far forward as practical to secure bit firmly in V-guide, then tighten cap screw on adjustable slide (see Figure 15). Note: Moving this clamp too far back could result in tool chatter and a poor finish on drill bit. Drill Bit Clamp Figure 16. Drill bit being fed into face of grinding wheel. 14. Slowly rotate attachment left to right across face of drill bit cutting edge. Repeat movement until desired finish is achieved. 15. Turn machine OFF. Cap Screw Figure 15. Adjustable drill bit clamp and cap screw. 10. Tighten drill bit clamp on drill bit by turning knob clockwise (see Figure 15 above). 16. Loosen drill bit clamp. Rotate drill bit 180 and align index plate with flute, as described in Step Repeat Steps When desired finish on both cutting edges is achieved, turn machine OFF and remove drill bit from attachment. -6- T10815 Grinding Attachments (Mfd. 4/14)
7 Lathe Tool Attachment T10815 Parts Diagram REF PART # DESCRIPTION REF PART # DESCRIPTION 1 PT TOOL BRACKET 7 PT HEX NUT M6-1 2 PT KNURLED KNOB M6-1 X 72 8 PT CAP SCREW M6-1 X 16 3 PT TOP PLATE 9 PT CAP SCREW M4-.7 X 10 4 PT FRONT PLATE 10 PT GUIDE SLEEVE 5 PT FLAT WASHER 8MM 11 PT CAP SCREW M5-.8 X 12 6 PT FLAT WASHER 6MM End Mill & Reamer Attachment REF PART # DESCRIPTION REF PART # DESCRIPTION 101 PT SLIDE BRACKET 110 PT CAP SCREW M6-1 X PT STOP COLLAR 111 PT CAP SCREW M6-1 X PT QUILL 113 PT OIL CUP 7.5MM 104 PT SQUARE NUT M PT CAP SCREW M5-.8 X PT INDEX ROD 115 PT HEX NUT M PT FIXED BLOCK 116 PT HANDWHEEL 59MM 107 PT CLAMP BLOCK 117 PT HANDLE M PT INDEX PIN 118 PT HANDWHEEL ROD 109 PT CAP SCREW M6-1 X PT SET SCREW M5-.8 X 4 CONE-PT T10815 Grinding Attachments (Mfd. 4/14) -7-
8 Drill Bit Attachment REF PART # DESCRIPTION REF PART # DESCRIPTION 201 PT GUIDE PLATE 212 PT CLAMP SCREW 202 PT CLAMP ROD 213 PT STAR KNOB 203 PT INDEX PLATE 214 PT SET SCREW M4-.7 X PT CLAMP BLOCK 215 PT SWIVEL CLAMP 205 PT LOCATING BLOCK 216 PT SWIVEL CLAMP LOCATOR 206 PT CROSS-SLIDE LOCATING PIN 217 PT STAR KNOB BOLT M6-1 X 16 CONE-PT 207 PT COLLET LOCATING PIN 218 PT CAP SCREW M4-.7 X PT CAP SCREW M6-1 X PT FLAT WASHER 6MM 209 PT CAP SCREW M6-1 X PT CAP SCREW M5-.8 X PT PHLP HD SCR M4-.7 X PT SET SCREW M4-.7 X PT FIXED BLOCK 222 PT CAP SCREW M4-.7 X 20 Please Note: We do our best to stock replacement parts whenever possible, but we cannot guarantee that all parts shown here are available for purchase. Call (800) or visit our online parts store at to check for availability. -8- T10815 Grinding Attachments (Mfd. 4/14)
MODEL T28173/T28174 ROLLER TABLES INSTRUCTIONS
MODEL T28173/T28174 ROLLER TABLES INSTRUCTIONS FOR MODELS MFD. SINCE 10/17 For questions or help with this product contact Tech Support at (570) 546-9663 or techsupport@grizzly.com Rails Rollers Reversible
More informationMODEL T TON HYDRAULIC PRESS INSTRUCTIONS (For Machines Mfd. Since 10/17)
MODEL T1241 20-TON HYDRAULIC PRESS INSTRUCTIONS (For Machines Mfd. Since 10/17) For questions or help with this product contact Tech Support at (570) 546-9663 or techsupport@grizzly.com Identification
More informationInventory MODEL T10096 TAPER ATTACHMENT FOR G0509 & G0509G LATHE INSTRUCTIONS. Inventory (Figure 1) Needed Items
MODEL T10096 TAPER ATTACHMENT FOR G0509 & G0509G LATHE INSTRUCTIONS Inventory The Model T10096 taper attachment was carefully packed when it left our warehouse. If you discover it is damaged after you
More informationMODEL T " X 72" BEECH CABINETMAKER'S WORKBENCH INSTRUCTIONS
MODEL T1251 25" X 72" BEECH CABINETMAKER'S WORKBENCH INSTRUCTIONS For questions or help with this product contact Tech at (570) 546-663 or techsupport@grizzly.com Introduction This cabinetmaker's workbench
More informationREAD THIS FIRST. For questions or help with this product contact Tech Support at (570) or
READ THIS FIRST Model G4002/G4003 ***IMPORTANT UPDATE*** For Machines Mfd. Since December, 2014 and Owner's Manual Printed April, 2014 For questions or help with this product contact Tech Support at (570)
More informationREAD THIS FIRST. For questions or help with this product contact Tech Support at (570) or
READ THIS FIRST Model G5912Z/G7214Z/G8621 ***IMPORTANT UPDATE*** For Machines Mfd. Since 1/17 and Owner's Manual Printed 2001 For questions or help with this product contact Tech Support at (570) 546-9663
More informationIMPORTANT: Chuck guard MUST be installed before drill chuck!
IMPORTANT: Chuck guard MUST be installed before drill chuck! Model G7945/G7946 ***IMPORTANT UPDATE*** For Machines Mfg. Since December, 2012 and Owner's Manual Revised August, 2009 The following changes
More informationInventory MODEL H7937 TAPER ATTACHMENT FOR THE G0600 LATHE INSTRUCTIONS. Inventory (Figure 1) Needed Items
MODEL H7937 TAPER ATTACHMENT FOR THE G0600 LATHE INSTRUCTIONS Inventory The Model H7937 taper attachment was carefully packed when it left our warehouse. If you discover it is damaged after you have signed
More informationREAD THIS FIRST. For questions or help with this product contact Tech Support at (570) or
READ THIS FIRST Model G0728-31 ***IMPORTANT UPDATE*** For Machines Mfd. Since 01/17 and Owner's Manual Revised 09/14 For questions or help with this product contact Tech Support at (570) 546-9663 or techsupport@grizzly.com
More informationTaper Attachment for G4016 Gear Head Lathe
Taper Attachment for Gear Head Lathe MODEL H0775 INSTRUCTION SHEET COPYRIGHT AUGUST, 2004 BY GRIZZLY INDUSTRIAL, INC. WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE OR FORM WITHOUT THE
More informationMODEL T " BENCH SHEAR INSTRUCTIONS
MODEL T10051 12" BENCH SHEAR INSTRUCTIONS 1. Overloading this tool can cause injury from flying parts if the tool breaks. Do not exceed the tool capacities. 2. NEVER operate the bench shear without the
More informationInventory (Figure 2) Copyright November, 2007 By Grizzly Industrial, Inc. Revised MAY, 2011 (JB)
MODEL T10024 ACCESSORY KIT #2 FOR T10010/T10097 WET GRINDER INSTRUCTION SHEET Introduction The Model T10024 Accessory Kit #2 for the Model T10010/T10097 Wet Grinder helps sharpen chisels and dress grinding
More informationMODEL T1238 MOBILE TOOL TABLE INSTRUCTIONS For Models Mfd. Since 10/17
MODEL T128 MOBILE TOOL TABLE INSTRUCTIONS For Models Mfd. Since 10/17 For questions or help with this product contact Tech Support at (570) 56-966 or techsupport@grizzly.com Introduction The Model T128
More informationMODEL T10050 RIGHT ANGLE IRON BENDER INSTRUCTIONS
MODEL T10050 RIGHT ANGLE IRON BENDER INSTRUCTIONS Damage to your eyes, face, and hands could result from using this item without proper protective gear, such as safety glasses or a face shield, and gloves.
More informationMODELS T10502, T10556, & T26300 TAPER ATTACHMENT INSTRUCTIONS
MODELS T10502, T10556, & T26300 TAPER ATTACHMENT INSTRUCTIONS For questions or help with this product contact Tech Support at (570) 546-9663 or techsupport@grizzly.com Introduction This taper attachment
More informationModel D3348 Extension Block Kit Instruction Sheet
INTRODUCTION Model D3348 Extension Block Kit Instruction Sheet Phone #: (360) 734-3482 Online Tech Support: tech-support@shopfox.biz Web: www.shopfox.biz This Extension Block Kit increases the maximum
More informationREAD THIS FIRST. For questions or help with this product contact Tech Support at (570) or
READ THIS FIRST Model G5912Z/G7214Z/G8621 ***IMPORTANT UPDATE*** For Machines Mfd. Since 1/17 and Owner's Manual Printed 2001 For questions or help with this product contact Tech Support at (570) 546-9663
More informationSECTION 9: PARTS G7945/G7946
SECTION 9: PARTS G7945/G7946 Main Parts 22 53 25 26 31 139 32 32-1 60 38 59 38-1 119 35 37 31 38-3 124 125 45A-2 45A-4 45A-1 31 60 45A-3V2 120 121 62 28 28-1 28 27 34 50 51 39 41 126 137 36 46 40 63 33
More informationQuill Stop V2 Installation Guide 11/16/2014
Thank you for purchasing the Quill Stop for the Sieg X3 (Grizzly G0463) and SX3 (Grizzly G0619) mills. Your feedback is always appreciated. Please email questions and comments to gregpriest@cox.net. What
More informationMODEL M1023 QUICK CHANGE COLLET ATTACHMENT INSTRUCTION MANUAL. Phone: On-Line Technical Support:
MODEL M1023 QUICK CHANGE COLLET ATTACHMENT INSTRUCTION MANUAL Phone: 1-360-734-3482 On-Line Technical Support: tech-support@shopfox.biz #6727BL COPYRIGHT JANUARY, 2005 BY WOODSTOCK INTERNATIONAL, INC.
More informationSECTION 9: PARTS Jointer Breakdown
Model G0490/G0490X (Mfd. Since 8/12) -49-1 3 8 7 9 12 14 15 16 18 21 23 24 24 28 29 32 33 37 38 38 44 45 49 50 51 53 55 56 57 58 59 61 60 64 65 66 68 72 75 80 81 82 83 84 85 86 87 88 90 91 92 94 93 96
More informationSECTION 9: PARTS Main
-64- Model G0765 (Mfd. Since 5/15) 1 2 3 4 5 6 7 8 9 9 10 10 11 11 12 12 13 14 15 16 17 18 19 20 21 21 22 23 23 24 25 26 27 28 29 30 31 32 33 35 36 37 38 39 40 41 42 43 44 44 45 157 46 47 48 49 50 50 51
More informationSECTION 10: PARTS. Headstock
33 32 31 30 7 SECTION 10: PARTS 34 23 36 22 15 14 12 35 37 48 39 41 42 50 40 25 38 38 26 39 42 44 41 25 26 40 51 43 52 10 5 53 9 4 1 27 2 21 19 20 Headstock 8 16 11 17 18 14 13 7 6 45 47 46 3 1 P0768001
More informationMODEL T28000 HEAVY-DUTY MOBILE BASE INSTRUCTIONS
MODEL T28000 HEAVY-DUTY MOBILE BASE INSTRUCTIONS For questions or help with this product contact Tech Support at (570) 546-9663 or techsupport@grizzly.com Introduction Your new Model T28000 Heavy-Duty
More informationMODEL T26413, T26414, & T26415 ARBOR PRESS INSTRUCTIONS
MODEL T26413, T26414, & T26415 ARBOR PRESS INSTRUCTIONS For questions or help with this product contact Tech Support at (570) 546-9663 or techsupport@grizzly.com Introduction This arbor press is designed
More informationSECTION 9: PARTS. Headstock
SECTION 9: PARTS We do our best to stock replacement parts when possible, but we cannot guarantee that all parts shown are available for purchase. Call (800) 52-4777 or visit www.grizzly.com/parts to check
More informationMODEL T21973 METAL BLADE GUIDE SET INSTRUCTIONS
MODEL T21973 METAL BLADE GUIDE SET INSTRUCTIONS Introduction (Figure 1) These Euro-style blade guides replace the blade guides on the G0531, G0531B, G0566, G0568, and G0569 bandsaw. Tools Needed Wrench
More informationSECTION 10: PARTS. Headstock
33 32 31 30 7 SECTION 10: PARTS 34 23 36 22 15 14 12 35 37 48 39 41 42 50 40 25 38 38 26 39 42 44 41 25 26 40 51 43 52 10 5 53 9 4 1 27 2 21 19 20 Headstock 8 16 11 17 18 14 13 7 6 45 47 46 3 1 P0768001
More informationREAD THIS FIRST. For questions or help with this product contact Tech Support at (570) or
READ THIS FIRST Model G0811 ***IMPORTANT UPDATE*** For Machines Mfd. Since 02/16 and Owner's Manual Printed 11/16 For questions or help with this product contact Tech Support at (570) 546-9663 or techsupport@grizzly.com
More informationMODEL T1184/T1185/T1186
MODEL T1184/T1185/T1186 RATCHETING ARBOR PRESS INSTRUCTIONS For questions or help with this product contact Tech Support at (570) 546-9663 or techsupport@grizzly.com Introduction This machine is designed
More informationMODEL T /2-TON ARBOR PRESS INSTRUCTIONS
MODEL T27033 1/2-TON ARBOR PRESS INSTRUCTIONS For questions or help with this product contact Tech Support at (570) 546-9663 or techsupport@grizzly.com Introduction This arbor press is designed to perform
More informationSECTION 9: PARTS Main Breakdown
SECTION 9: PARTS Main Breakdown 2 115 75 113 112 8 9 7 8 11 4 5 3 3 85 81 79 78 90 84 68 69 69 68 87 86 86 91 95 98-2 98-1 98-3 98-4 98 98-8 98-9 98-5 98-6 99 97 98-7 100 92 114 108 107 110 109 111 104
More informationSECTION 9: PARTS. Headstock A 126A 127A-1 REF PART # DESCRIPTION REF PART # DESCRIPTION
SECTION 9: PARTS Headstock 120 121 113 115 112 111 110 109 108 105 106 107 135 101 119A 121 120 118 114 115 107 106 104 123 122 118 114 126A 105 126 103 102 126B 127A-1 131 127A 124 133 134 126C 129 130
More informationMODEL T1248/T1249 HEAVY-DUTY BEECH WORKBENCH INSTRUCTIONS
MODEL T14/T14 HEAVY-DUTY BEECH WORKBENCH INSTRUCTIONS For questions or help with this product contact Tech Support at (0) 4- or techsupport@grizzly.com Introduction These workbenches are designed to be
More informationMODEL T " HELICAL CUTTERHEAD INSTALLATION INSTRUCTIONS
MODEL T27696 12" HELICAL CUTTERHEAD INSTALLATION INSTRUCTIONS For questions or help with this product contact Tech Support at (570) 546-9663 or techsupport@grizzly.com Introduction The Model T27696 indexable
More informationMODEL T10809 WOOD LATHE CHUCK SET INSTRUCTIONS
MODEL T10809 WOOD LATHE CHUCK SET INSTRUCTIONS For questions or help with this product contact Tech Support at (570) 546-9663 or techsupport@grizzly.com Introduction The T10809 3 3 4" Wood Lathe Chuck
More informationSECTION 10: PARTS. Main Model G0771Z (Mfd. Since 09/16)
SECTION 10: PARTS Main 96 103 105 119 104 120 102 101 124 29-1 29-4 29-2 29-5 29-3 29-6 29-7 29-8 29-9 29-10 97 98 99 121 100 106 97 98 99 100 121 96 29 27 28 125 24 25 26 30 53 41 40 39 31 34 114 115
More informationSECTION 9: PARTS Fence & Cutterhead
(G0855 Only) (G0856 Only) SECTION 9: PARTS Fence & Cutterhead 1 2 3 4 65 6 5 23 111 111 7 27 130 131 132 133 136 134 135 117 12 40 8 9 13 10 9 14 15 8 11 18 25 29 63 19 20 21 17 22 28 26 26 24 40-3 40-2
More informationMODEL G0760 8" X 29" MILL/DRILL w/stand & POWER FEED MANUAL INSERT
MODEL G0760 8" X 29" MILL/DRILL w/stand & POWER FEED MANUAL INSERT The Model G0760 is the same machine as the Model G0705 except the Model G0760 has an X-axis table power feed. Except for the differences
More informationPARTS. W1669 & W1670 Parts PARTS. Model W1669/W1670 (For Machines Mfd. Since 04/18) 66V A A A 28A
W1669 & W1670 Parts 23 66V2 22 21 25 26 53A 62 63 89 64 9 65 24 20 15 16A 54 93 10 16A-1 81 77 94 53 79 102 103 28 36 8 30 19 31 32 32-1 109 28A 28 27 34 33 56 49 76 76 19-3 19-1 19-2 38-1 89 35 60 59
More informationINSTRUCTION MANUAL TAPER ATTACHMENT MODEL M1022. Phone: (360) On-Line Technical Support: FOR USE WITH MODEL M1019
MODEL M1022 TAPER ATTACHMENT FOR USE WITH MODEL M1019 INSTRUCTION MANUAL Phone: (360) 734-3482 On-Line Technical Support: tech-support@shopfox.biz #6809BL COPYRIGHT DECEMBER, 2004 BY WOODSTOCK INTERNATIONAL,
More informationG0513X2 Main. G0513 Series Bandsaws (Mfd. Since 07/18) A V2
G0513X2 Main 55 17 48 7 16 55A 14 15 49 13 47 50 12 10 71 70 72 73 59 69 74 46 11 9 8 76 5 75 4 68 81 80 67 66 48 50 39 78 79 23 17-3 17-2 17-1 17-4 17-2 21 22 24 17-5 32 33 34 35 28 2 45 3 38 44 39 43
More informationMODEL G4017 G4020 ARBOR PRESS INSTRUCTIONS
MODEL G4017 G4020 ARBOR PRESS INSTRUCTIONS For questions or help with this product contact Tech Support at (570) 546-9663 or techsupport@grizzly.com Introduction This arbor press is designed to perform
More informationREAD THIS FIRST. The following changes were recently made to these machines since the owner's manual was printed:
READ THIS FIRST Model G0656/P/PX/X ***IMPORTANT UPDATE*** For Machines Mfg. Since April, 2014 & Owner's Manual Printed September, 2009 The following changes were recently made to these machines since the
More informationSECTION 9: PARTS. Accessories
SECTION 9: PARTS Accessories 2 1 1-1 1-2 3 4 39 138 35 135 40 34 33 7 6 5 401V2 36 36-3 36-2 28 29 30 27 26 31 32 25 22 24 23 16-21 15 14 10 11 9 13 12 36-1 37 38 1 P4003G0001 4-JAW INDEPENDENT CHUCK ASSEMBLY
More informationMODEL H9565 BALL BEARING GUIDE FOR G0513/G0514 INSTRUCTION SHEET
MODEL H9565 BALL BEARING GUIDE FOR G0513/G0514 INSTRUCTION SHEET Introduction The Model H9565 replaces the upper and lower Euro-style guides on your G0513 or G0514 Bandsaw. Inventory (Figure 1) A. Upper
More informationSECTION 9: PARTS Cabinet & Base
SECTION 9: PARTS 5 5-1 48 3 75 90 49 4 91 333 46 47 30 89 88 2 34 33 37 36 78 35 32 326 316 49 42 45 83 84V2 43 1 7 8 9 12 87 10 11 Cabinet & Base 31 17 20 40 39 136 41 135 85 86 8 28 26 18 19 21 19 370
More informationMODEL T " PORTABLE BENCHTOP BRAKE INSTRUCTIONS
MODEL T10052 14" PORTABLE BENCHTOP BRAKE INSTRUCTIONS 1. Overloading this tool can cause injury from flying parts. Do not exceed the machine capacities. 2. Secure bench hand brake to a sturdy surface before
More informationPARTS. Model W1701W (For Machines Mfd. Since 1/16) -47- REF PART # DESCRIPTION REF PART # DESCRIPTION
Base Breakdown 29 25 2 3 31 8 9 32 28 27 26 23 22 19 18 17 33 36 21 1 6 3 35 37 38 390 33 3 16 3-3-2 15 3-3 3-1 3-6 3-5 12 3-7 1 11 5 7 2 7 10 9 3 6 6 2 1 2 3 5-6- Base Parts List 1 X1701W001 STAND SIDE
More informationREAD THIS FIRST. The following changes were recently made to these machines since the owner's manual was printed:
READ THIS FIRST Model G0609/G0609X ***IMPORTANT UPDATE*** For Machines Mfg. Since August, 2012 and Owner's Manual Revised February, 2008 The following changes were recently made to these machines since
More informationSECTION 9: PARTS. Electrical REF PART # DESCRIPTION REF PART # DESCRIPTION
SECTION 9: PARTS Electrical 1 P4002001 START BUTTON 52 P4002052 CONTACTOR GSC1CJX4-D 110V 2 P4002002 INDICATOR LIGHT 53 P4002053 CONTACTOR JZC3-40D 110V 3 P4002003 JOG BUTTON 54 P4002054 FUSE HOLDER 4
More informationSECTION 9: PARTS G0513/G0513P/G0513ANV
SECTION 9: PARTS G0513/G0513P/G0513ANV Main 21 22 23 82-6 82-5 48 22 19 20 24 18 17 24 17 26 21 55 17 16 14 15 32 33 34 20 18 27 25 50 13 47 18 82-1 175 35 55A 49 9 11-1 10 46 45 11 12 44 176 39 38 37
More informationSECTION 9: PARTS Table
SECTION 9: PARTS Table 33 We do our best to stock replacement parts when possible, but we cannot guarantee that all parts shown are available for purchase. Call (800) 523-4777 or visit www.grizzly.com/
More informationREAD THIS FIRST. For questions or help with this product contact Tech Support at (570) or
READ THIS FIRST Model G0668 ***IMPORTANT UPDATE*** For Machines Mfd. Since June, 2008 and Owner's Manual Printed February, 2008 For questions or help with this product contact Tech Support at (570) 546-9663
More informationEllisSaw.com. EllisSaw.com P.O. Box Verona, WI
P.O. Box 9019 Verona, WI 9-019 GENERAL OPERATING & SAFETY INSTRUCTIONS * READ INSTRUCTIONS BEFORE USE * CAUTION: Disconnect power supply cord from power source when doing repair work or changing belt.
More informationBUY PARTS ONLINE AT GRIZZLY.COM!
SECTION 9: PARTS Tables, Fence & Cutterhead 28 29 26 27 25 23 23 22 24 22 35 37 36 38 16 15 17 18 39 11 14 19 20 21 13 12 6 7 8 9 10 1 2 5 49 3 4 3 31 30 6 7 94 93 95 40 96 43 42 44 45 46 47 48 55 55-4
More informationSECTION 9: PARTS. G7947 Stand & Table Breakdown 4V2
SECTION 9: PARTS G7947 Stand & Table Breakdown 19 15 21 18 16 17 112 5 113 3 14 8 7 6 6-1 13 4V2 12 116 11 9 10 2 114 115 1 We do our best to stock replacement parts when possible, but we cannot guarantee
More informationSECTION 9: PARTS. Table Breakdown REF PART # DESCRIPTION REF PART # DESCRIPTION
SECTION 9: PARTS Table Breakdown 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 23 25 17 26 27 8 1 P0675001 CAP SCREW M8-1.25 X 30 15 P0675015 SUPPORT BLOCK 2 P0675002 TABLE SUPPORT BLOCK
More informationREAD THIS FIRST. For questions or help with this product contact Tech Support at (570) or
READ THIS FIRST Models G0453, G0453Z, G0454, G0454Z ***IMPORTANT UPDATE*** For Machines Mfd. Since 09/17 and Owner's Manuals Revised 11/12 For questions or help with this product contact Tech Support at
More informationSECTION 9: PARTS. Table. Spiral Cutterhead For Model G0452Z Cutterhead For Models G0452/P Model G0452/P/Z (Mfg.
SECTION 9: PARTS Table 17 18 19 87 86 21 262-3 262-1 262-2 27 28 29 30 22 23 24 35 36 37 38 262 25 26 2 13 Cutterhead For Models G0452/P 10 45 12 13 7 8 9 50A 6 11 31 14 15 16 12 13 81 82 83 84 32 85 33
More informationSECTION 9: PARTS. Accessories
SECTION 9: PARTS Accessories 2 1 1-1 1-2 3 4 39 138 35 135 40 34 33 7 6 401V2 36 36-3 36-2 28 29 30 27 26 31 32 25 22 24 23 16-21 15 14 10 11 9 13 12 36-1 37 38 1 P4003G0001 4-JAW INDEPENDENT CHUCK ASSEMBLY
More informationFor questions or help with this product contact Tech Support at (570) or
MODEL T1227/T1228/T1229 MAGNETIC CHUCK INSTRUCTIONS For questions or help with this product contact Tech Support at (570) 546-9663 or techsupport@grizzly.com Introduction The T1227-29 Magnetic Chucks are
More informationMODEL G0759 MILL/DRILL w/stand & DRO MANUAL INSERT
MODEL G0759 MILL/DRILL w/stand & DRO MANUAL INSERT The Model G0759 is the same machine as the Model G0704 except the Model G0759 has a 3-axis DRO. Besides the differences noted in this insert, all other
More informationSECTION 9: PARTS. Accessories 2-1
SECTION 9: PARTS Accessories 2-2 3 1 1-3 1-1 2 2-1 5 12 1-2 13 11 31 10 9 7 6 4 15 8 14 19 20 21 23 24 28 29 30 18 17 16 25 27 1 P0750G0001 3-JAW CHUCK ASSEMBLY 6" D1-5 SCROLL 13 P0750G0013 DRL CHK KEY
More informationBE1151 Precision Priming Press Instructions
BE1151 Precision Priming Press Instructions Tech Support: (360) 676-3299 Email: service@bullets.com Web: www.bullets.com Shell Holder Not Included. Introduction The Model BE1151 is designed to be the ultimate
More informationG0614 Control Box Parts
READ THIS FIRST Model G0613/G0614 ***IMPORTANT UPDATE*** 192 For Machines Mfd. Since 07/06 and Owner's Manual Revised 12/07 For questions or help with this product contact Tech Support at (570) 546-9663
More informationG0614 Control Box Parts
READ THIS FIRST Model G0613/G0614 ***IMPORTANT UPDATE*** 192 For Machines Mfd. Since 07/06 and Owner's Manual Revised 12/07 For questions or help with this product contact Tech Support at (570) 546-9663
More informationGEAR HEAD METAL LATHE
GEAR HEAD METAL LATHE MODEL G4002 / G4003 PARTS LIST COPYRIGHT 2000 BY GRIZZLY INDUSTRIAL, INC. WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE OR FORM WITHOUT THE WRITTEN APPROVAL OF
More informationG0513X2 Main -87- G0513 Series Bandsaws 82V V2 82-6V2 95A V2 82-5V2 82-1V2 82-4V V A
G0513X2 Main 23 55 22 48 17 17-1 17-2 21 7 17-3 17-2 17-4 24 17-5 18-5 22 24 21 55A 50 8 9 49 11 12 13 14 15 47 16 10 46 45 3 44 43 39 38 37 39 40 32 33 36 42 34 35 2 25 28 18-4 18-2 18-3 31 30 29 18-1
More informationMODEL G0686 LARGE DRILL BIT GRINDER OWNER'S MANUAL
MODEL G0686 LARGE DRILL BIT GRINDER OWNER'S MANUAL WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC. Table of Contents
More informationColumn & Stand. -4- Model G0759 (Mfd. Since 1/14)
Column & Stand 3 4 5 6 7 8 12 2 1 9 10 11 20 21 13 14 15 18 16 17 25 3 26 27 28 29 31 31-1 32 33 34 47 46 45 3644 48 35 36 37 39 43 44 42 38 40 41 412 24 23 22 52 51 50 30 49 412-2 412-1 57 58 39 59 60
More informationMain Parts. -6- Model G0555LA35 (Mfd. Since 10/17) 30A V
60 49 50 76 41 65 66 44 46 43 42 47 51 63 58 64 59 48 62 16 61V2 50 51 55 56 57 70 49 69 64 55 56 43 57 167 154 41 40 8 22 30A 44 45 3 4 Main Parts 14 15 16 7 168 155 30 195 34 194 186 6 68 24 115 116
More informationMODEL T " HELICAL CUTTERHEAD INSTALLATION INSTRUCTIONS
MODEL T27698 6" HELICAL CUTTERHEAD INSTALLATION INSTRUCTIONS For questions or help with this product contact Tech Support at (570) 546-9663 or techsupport@grizzly.com The Model T27698 indexable insert
More informationInventory (Figure 2)
MODEL T10127 12" SPIRAL CUTTERHEAD INSTRUCTIONS The Model T10127 indexable insert spiral cutterhead is designed to replace the straightknife cutterhead from the Grizzly jointer Model G0609. The total procedure
More informationTrade of Toolmaking Module 2: Turning Unit 1: Machine Controls and Operations Phase 2
Trade of Toolmaking Module 2: Turning Unit 1: Machine Controls and Operations Phase 2 Published by SOLAS 2014 Unit 1 1 Table of Contents Document Release History... 3 Unit Objective... 4 Introduction...
More informationSECTION 9: PARTS Main
SECTION 9: PARTS Main 58 63 67 66 65 67 66 59 58 49 58 48 49 61A 61 64 62 55 50 35-3 34 35-1 57 56 41 42 151 51 50 33A 35-2 30A 30A-1 35 38 39 31 32 18 40 43 44 68 51 41 45 46 57 56 55 47 152 153 20 21
More informationOPERATOR'S MANUAL RULES FOR SAFE OPERATION
OPERATOR'S MANUAL #4950300 ROUTER AND JIG SAW MOUNTING KIT (FOR USE WITH THE BT3000 TABLE SAW) CONGRATULATIONS AND THANK YOU FOR BUYING THIS RYOBI ROUTER AND JIG SAW MOUNTING KIT. Your new #4950300 Router
More informationTormek Compatible Support System for Delta Universal Wet/Dry Grinder (Model )
Tormek Compatible Support System for Delta Universal Wet/Dry Grinder (Model 23-700) NOTICE: Prospective users should be aware that this product is not endorsed by Delta or Tormek and the user assumes all
More informationHow to program the digital speed display (This is factory set and will only need to be programmed if the unit is replaced)
How to program the digital speed display (This is factory set and will only need to be programmed if the unit is replaced) 1. Press and hold the set button (top left corner) until the display shows Fun
More informationModel D1700/D1701 Moulding Head Instruction Sheet
Model D1700/D1701 Moulding Head Instruction Sheet Phone #: (360) 734-3482 Online Tech Support: tech-support@shopfox.biz Web: www.shopfox.biz To reduce risk of serious personal injury when using moulding
More informationMODEL T " SPIRAL CUTTERHEAD INSTALLATION INSTRUCTIONS
MODEL T27449 8" SPIRAL CUTTERHEAD INSTALLATION INSTRUCTIONS The Model T27449 indexable insert spiral cutterhead is designed to replace the straightknife cutterhead on the Grizzly jointer Model G0490W/G0490XW
More informationMain Breakdown. Model G0531B/G0566B V2 (G0531B) 80V2-2
Main Breakdown 53 85-1 54 59 54 56 54 52 55 57 175 53 56 85 29 119-2 114 89 22 119-2 119 107 119-5 119-3 119-6 119-1 29 22 119-4 114 112 96 113 114 100 116 117 105 120 102 103 108 115 99 98 92 91 90 73
More informationSERIES I MILLING MACHINES
INSTALLATION, OPERATION, MAINTENANCE, AND PARTS LIST SERIES I MILLING MACHINES TP5260 Revised: August 29, 2005 Manual No. M-450 Litho in U.S.A. Part No. M -0009500-0450 June, 2003 MAINTENANCE PROCEDURES
More informationMODEL T27697 & T " & 8" HELICAL CUTTERHEADS INSTALLATION INSTRUCTIONS
MODEL T27697 & T27699 6" & 8" HELICAL CUTTERHEADS INSTALLATION INSTRUCTIONS For questions or help with this product contact Tech Support at (570) 546-9663 or techsupport@grizzly.com These indexable insert
More informationSECTION 9: PARTS. Main Breakdown -36- Model G5394 (Mfd. Since 11/08)
SECTION 9: PARTS Main Breakdown 105 137 136 113-1 113 141 140 113-2 113-3 111 113-4 114 135 143 144 101 121-1 -1 116 147-1 121-2 115 120 121 107 108 164 162 160 158 138 109 127 126 160 158 123 127 123
More informationROTARY TABLE OPERATION AND SERVICE MANUAL HORIZONTAL AND VERTICAL. Horizontal & Vertical. Rotary Table (HVRT) Tilting Rotary Table
Horizontal & Vertical Rotary Table (HVRT) OPERATION AND SERVICE MANUAL Tilting Rotary Table Horizontal & Vertical Rapid Indexer VERTICAL AND HORIZONTAL ROTARY TABLE This Horizontal & vertical table is
More informationSignature Choral Riser Side Rail
Assembly/Owner s Manual Signature Choral Riser Side Rail Signature Choral 3-Step Riser with Optional Side Rail Signature Choral 4-Step Riser with Optional Side Rail CONTENTS Visit the Signature Choral
More informationSECTION 9: PARTS. Main Breakdown -43- Model G0458Z (Mfd. Since 12/17)
SECTION 9: PARTS Please Note: We do our best to stock replacement parts whenever possible, but we cannot guarantee that all parts shown here are available for purchase. Call (800) 53-4777 or visit our
More informationModel W1837 (For Machines Mfd. Since 8/18) PARTS. Main PARTS -83-
-83- Main 29 30 31 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 113 96 90 91 92 93 95 96 97 98 100 101 102 103 104 105 106 109
More informationSECTION 9: PARTS. Table & Column Breakdown
SECTION 9: PARTS Table & Column Breakdown Table & Column Parts List 201 P1126201 TABLE HANDWHEEL 230 P1005603 LIMIT STOP SLEEVE 205 P1126205 LEADSCREW ASSY M23.5-2.5 X 468 2121 P11262121 INDICATOR PLATE
More informationMODEL G0604X 6" EXTREME SERIES PARALLELOGRAM JOINTER MANUAL INSERT
MODEL G0604X 6" EXTREME SERIES PARALLELOGRAM JOINTER MANUAL INSERT The Model G0604X is the same as the Model G0604, except it has a 1 1 2 HP 110/220V motor. Besides the data sheet, parts, and wiring diagram
More informationMODEL H " BYRD SHELIX CUTTERHEAD INSTRUCTIONS
MODEL H9291 12" BYRD SHELIX CUTTERHEAD INSTRUCTIONS The Model H9291 12" Byrd Shelix cutterhead is designed to replace the straight-knife cutterhead on the Grizzly jointer Model G0609. The total procedure
More informationTaig Lathe Instruction Booklet 03J71.00
Page 1 of 12 Taig Lathe Instruction Booklet 03J71.00 1. Specifications Center Height: 2.250" Distance Between Centers: 9.75" Recommended Motor: 1/6 to 1/4 hp, 1725 rpm, 1/2" arbor Accuracy:?.001" Spindle:
More information3850, Drum & Disc Brake Lathes. Parts Identification
3850, 3860 Drum & Disc Brake Lathes Parts Identification READ these instructions before placing unit in service. KEEP these and other materials delivered with the unit in a binder near the machine for
More informationBig Sweep Lathe Dust Catcher System
Big Sweep Lathe Dust Catcher System Version.0 Disconnect saw from power source before fitting or removing insert. Ear Protection proper ear protection when working with machinery. Use caution when handling
More informationSECTION 10: PARTS G1023RL
SECTION 10: PARTS 131 132 133 G1023RL (All) Main 121 118 119 128 126 125 124 123 124 122 120 119 128 116 6V2 5 4V2 4-1 129 127 128 117 26V3 26-3V2 26-1 6-2 (G1023RLWX) 26-2 26-4V3 7 6-1 1 (G1023RL) 19-1
More informationWARNING! Read and understand the entire instruction manual before attempting set-up or operation of this machine!
! WARNING! Read and understand the entire instruction manual before attempting set-up or operation of this machine! 1. This machine is designed and intended for use by properly trained and experienced
More informationCV1B Sliding Table Installation and Setup Guide
CV1B Sliding Table Installation and Setup Guide Tech Mark, Inc 7901 Industry Drive North Little Rock, AR 72117 tel (501) 945-9393 fax (501) 945-0312 www.tech-mark.com email: info@tech-mark.com The CV1B
More informationVARIABLE SPEED WOOD LATHE. Model DB900 INSTRUCTION MANUAL
VARIABLE SPEED WOOD LATHE Model DB900 INSTRUCTION MANUAL 1007 TABLE OF CONTENTS SECTION...PAGE Technical data.. 1 General safety rules....1-3 Specific safety rules for wood lathe.....3 Electrical information.4
More informationPARTS Stand Breakdown
PARTS Stand Breakdown 35-5 35-2 35-4 63 1 2 3 4 5 35-1 35-3 36 37 38 39 35 34 33 32 30 28 6 7 8 21 29 23 22 27 26 25 24 42 43 44 45 46 47 9 10 62 61 60 51 11 59 19 18 12 12 13 58 14 57 15 56 55 54 53 52
More information