øc Taper No. Model Taper No. øc ød H W P øm Adapter Model TMS TMS

Transcription

1 PERIPERAS

2 PERIPERAS TOOING MATE For mounting and removal of PUSTUD BOTs and tools! øc Taper No. Adapter ock Screw W P Exchangeable Adapter Taper No. Special resin 4-øM Taper No. øc W P øm Adapter TMS TMA (for M6) -40 TMS TMA (for M8) One adapter is included with the body. 2. Adapters are also available separately. 3. Adapter ock Screw is also available separately. ( RTM0615) 4. Cap bolts (4 pcs) for mounting on a workbench or surface plate are not included. [For SK/BIG CAPTO SANK] Unique needle roller clamping method. The tool is safely fastened without damaging the taper. SK No. BIG CAPTO No. Adapter øc Adapter ock Screw W P 4-øM SK BIG CAPTO Adapter øc W P øm No. No. TMS40-32R TMA40-32R - 40R 40 C R R 50 C (for M6) - 50R - 63R 63 C R TMS50-80R 80 C TMA50-80R R (for M8) -100R 1. One adapter is included with the body. 2. Adapters are also available separately. 3. Adapter ock Screw is also available separately. (: RTM0615) 4. The body (blue component) is compatible with other Tooling Mates as far as the first 2 digits of the model number are identical. 5. Cap bolts (4 pcs) for mounting on a workbench or surface plate are not included. PERIPERAS Tap Collet fastening jig TC MATE Easy tap mounting and removal for Tap Collets TC8, TC12, TC20, and TC30! ø105 Adapter ock Screw [Adapter] TC12 Adapter TC20 TC30 ø TC8 TCM50 TCA One adapter is included with the body. 2. Adapter is also available separately. 3. Adapter ock Screw is also available separately. (: RTM0615) 4. The body (blue component) is compatible with other Tooling Mates as long as the first 2 digits of the model number are identical. 5. Cap bolts (4 pcs) for mounting on a workbench or surface plate are not included. Exchangeable with existing adapter of your TMS50 Tooling Mate.

3 PERIPERAS TOOING MATE UNIVERSA With flexible positions of vertical, horizontal and diagonal, tool setup time is drastically reduced. 1 M10 mounting bolt hole (x4) 2 W øp Shank When mounting on a workbench, fix at a location without interference with the pullstud bolt. Workbench Shank 1 2 W Mounting bolt hole TMU50-50 BT50, BBT M10 20 Cap bolts (4 pcs) for mounting on a workbench or surface plate are not included. The max. acceptable length of the bolt is 50mm. øp Size Weight (kg) ±90 tilt Solidly fixable at every rotation Ideal for replacing inserts The holder can be securely fixed at inclinations of every 45. Work high in loads such as tightening pullstud bolts can be securely performed. 0 ±45 ±90 Mounting is easy and fast, as inserts can be replaced while rotating the holder 360. (indexable at every 45 ) PERIPERAS 2

4 PERIPERAS ODER OCK Tool clamp stand exclusive for horizontal mode. 3 Fixing cap øM 4 4 øm Prevents tools from falling into the chuck when mounting small-diameter tools. Taper No øm Fixing cap -BT30 BBT/BT CP 7 (for M6) -BT40 BBT/BT CP -BT50 BBT/BT (for M8) -50CP 1. Fixing caps are also available separately. 2. ODER OCKs are exclusive for BBT/BT shank holders. 3. Cap bolts (4 pcs) for mounting on a workbench or surface plate are not included. For SK/BIG CAPTO SANK KOMBI GRIP A unique clamping method using 2-way clutch needle rollers on the flange periphery. The tool can be safely fastened without damaging the taper. SK No. BIG CAPTO No. øc 4-øM SK BIG CAPTO No. No. øc øp øm KG 25R R (for 40R 40 C M6) 50R 50 C R 63 C R 80 C (for 100R M8) øp 1. Cap bolts (4 pcs) for mounting on a workbench or surface plate are not included. PERIPERAS For ST SANK ST OCK Fixes cylindrical shank tools, ideal for tightening nuts. Supports cylindrical shank diameters of ø20, ø25, and ø32. Cylindrical Shank exclusive Sleeve ø88 4-ø7 (for M6) 40 ø20 ø25 ø32 40 Advice Also available for holders with small size interfaces including SK-E25 and One sleeve each of ø20, ø25, and ø32 is included. 2. Do not clamp without a tool. 3. Cap bolts (4 pcs) for mounting on a workbench or surface plate are not included. Caution: Use after securely bolting to a workbench or surface plate. ST40 3

5 PERIPERAS <For holder bores> Cleaning tool α WIPER CEANER (for chuck bore: ø6 - ø12) Developed for cleaning the clamping bores such as hydraulic chucks and shrink fit holders. Use a cleaner matching the chuck bore size. Ideal for small-diameter bores! Insert and extract the cleaner to remove inner chips, particles and oil. Inner diameter ø6 and up AWC6 AWC7-12 Cleaning strips Cleaning strips AWC 6 6 AWC 7 7 AWC 8 8 AWC 9 9 AWC10 10 AWC11 11 AWC in table = supported holder bore ød TK CEANER PAT. (For chuck bores: ø13 - ø42) Wipes off particles and oil in chuck bore and keeps your machining safe and secure. 1 For MEGA DOUBE POWER CUCK/ NEW i- POWER MIING CUCK/YDRAUIC CUCK Supported holder bore ød TKC Number of cleaning strips Select in accordance with the chuck bore 2 Turn When the lever is pressed out, the upper part slides and the diameter is reduced, allowing it to fit smoothly into the holder bore. When the lever is released, spring action automatically causes the cleaning strips to contact the bore. Rotate the grip to wipe away oil and particles. PERIPERAS Automatic cleaning tools, convenient for factory automation. FANGE FACE CEANER For spindle flange face Automatically cleans the spindle flange face of BIG-PUS machines. Enables stabler DUA CONTACT machining. For details, A171 4

6 PERIPERAS <For holder bores> Cleaning tool α Taper Cleaner Removes oil and particles from the chuck bore taper. Turn For MEGA MICRO CUCK For MEGA NEW BABY CUCK/ NEW BABY CUCK For MEGA E CUCK Body Body Body SC-NBC3S SC-NBC4S SC-NBC6S SC-NBC8S MEGA3S MEGA4S MEGA6S MEGA8S SC-NBC 6 MEGA 6N / NBS 6 SC-NBC 8 MEGA 8N / NBS 8 SC-NBC10 MEGA10N / NBS10 SC-NBC13 MEGA13N / NBS13 SC-NBC16 MEGA16N / NBS16 SC-NBC20 MEGA20N / NBS20 SC-MEC 6 MEGA 6E SC-MEC 8 MEGA 8E SC-MEC10 MEGA10E SC-MEC13 MEGA13E For ER CUCK <For holder tapers> Cleaning tool α TOOING CEANER The taper and flange face are cleaned simultaneously. SC-MER11 SC-MER16 SC-MER20 SC-MER25 SC-MER32 Body MEGA ER11 MEGA ER16 MEGA ER20 MEGA ER25 MEGA ER32 Turn Strips for taper Strips for flange face SCE-30 SCE-40 Shank BBT30 / BT30 BBT40 / BT40 SPINDE CEANER Completely removes oil and particles from machine spindle and holder bore! For ISO Taper Spindle For Morse Taper Spindle PERIPERAS SC20 SC30 SC40 SC45 SC50 Taper BBT/BT20 (NT20) BBT/BT30 (NT30) BBT/BT40 (NT40) BBT/BT45 (NT45) BBT/BT50 (NT50) SC1 SC2 SC3 SC4 SC5 SC6 Taper MT1 MT2 MT3 MT4 MT5 MT6 For SK Spindle 1. Also available for the bore of Morse taper holders. Spindle Spindle SC-SK 32 SK-A SK-A SK-A SK-A SK-A SK-A100 SC-SK25E SK-E 25 32E SK-E 32 40E SK-E 40 50E SK-E 50 5

7 PERIPERAS T-SOT CEAN Set in the T-slot on machine tables to prevent chips from being packed. Flattens surface of the table and aids quick removal of chips. Three sizes of groove widths are available to match the machine table. (T-slot widths 14/18/22mm) Setup time greatly reduced Before use After use Removal pin included Other manufacturers Ideal tension Due to the uniquely angled shape of the table T-slot contact part, slipout is prevented and chips are completely shut out. W 1,000/400/100 Cut for use, for dimensions not listed above. Standard set Set W Set contents 400mm set Set W Set contents TS14-S mm x 4 pcs TS18-S mm x 4 pcs TS22-S 22 Removal pin x 1 pc TS P 14 TS P 18 TS P mm x 100 pcs Removal pin x 10 pcs Ideal for T-slots in large machines! 1,000mm set Set W Set contents TS P 18 1,000mm x 10 pcs TS P 22 Removal pin x 1 pc PERIPERAS 6

8 PERIPERAS TOOING WAGON Tools with various types and sizes of shank can be stored. Tooling block Block case NC TOOING WAGON Standard type Number of tools storable with one wagon Weight (kg) TW-1 BT50, BT45 NT50, NT45 (With 3 block case sets <30 tooling blocks>) } BT40, BT35, BT30 NT40, NT35, NT30 7 tools in 1 row 21 tools in 3 rows } 18 tools in 1 row 54 tools in 3 rows 43.8 Block case 180 (Optional) <With 10 tooling blocks> Number of tools storable in 1 block case row (10 pcs) For BT50 Shank...7 tools TW-B For BT40 Shank...18 tools For BT30 Shank...18 tools PERIPERAS 7