DIN ISO 12164

Transcription

1 It is the outstanding rigidity and accuracy of the NEW BABY CHUCK, used for holding the cutting tool, that produces high precision with less runout. Available in various sizes to meet specific production requirements. A90 NBS type SPINDE ANE : 90 K Fixed ength A K øe P Q øe Q P in. access bore øf in. access bore øf R18 Fixed ength A The rotation of the cutting tool is in reverse direction of the machine spindle.(speed Ratio 1:1) odel HSK-A63-A90/NBS A90/NBS A90/NBS A90/NBS20S -180 S Fig. øe K 1 2 P Q øf Collet The standard Fixed ength A is 8mm. Other lengths are available upon request. 3. Clamping nut and wrench are included. Collet must be ordered separately. 4. New Baby Collet for endmill model NBC - EAA cannot be used. 5. is ordered separately. (Coolant is supplied through the ocating Pin, not the.) Exclusive STOP BOCK is required. NBC 6 NBC10 NBC20 ax. min -1 3, For NEW BABY COET 3 For STOP BOCK 25 For COOANT PIPE C 51 C 27

2 K 1 2 øe Q P in. access bore øf Fixed ength A C The rotation of the cutting tool is in reverse direction of the machine spindle.(speed Ratio 1:1) odel HSK-A100-A90/NBS A90/NBS A90/NBS A90/NBS øe K 1 2 P Q øf The standard Fixed ength A is 6mm. Other lengths are available upon request. 3. Clamping nut and wrench are included. Collet must be ordered separately. 4. New Baby Collet for endmill model NBC - EAA cannot be used. 5. is ordered separately. (Coolant is supplied through the ocating Pin, not the.) S=80 type is available upon request. Collet NBC 6 NBC10 NBC20 Exclusive STOP BOCK for is required. ax. min -1 3, For NEW BABY COET 3 For STOP BOCK 25 For COOANT PIPE C 51 HSK SHANK C 28

3 Compact and lightweight design combined with the accuracy required for drilling. Ideal size for small machining centers. A90 COPACT type SPINDE ANE : 90 Case & head sizes are substantially reduced. For drilling High quality components High precision New Baby Collet Spiral bevel gears and angular contact bearings Advanced non-contact sealing structure STANDARD TYPE COPACT TYPE 25 Fixed ength H 1 ø81 2 NBS AX.5,000min-1 ø18 1 PT1/ ø81 18 NBS S=80 Fixed ength H 45 The rotation of the cutting tool is in reverse direction of the machine spindle. odel Fig. 1 HSK-A 63-A HSK-A100-A Clamping nut and wrench are included. Collet must be ordered separately. 2. New Baby Collet for endmill model - EAA cannot be used. 3. Fixed ength H and angle vary depending on machine models. Please specify your required dimensions ø18 For NEW BABY COET 3 AX.5,000min PT1/8 Collet For STOP BOCK 25 Exclusive STOP BOCK is required. Exclusive STOP BOCK for compact type is the same as HIH SPINDE & Hi JET HODER. Speed Ratio A tapped hole (PT1/8) is prepared at the bottom cover of the ocating Pin housing so that a pipe for coolant can be connected. 5. is ordered separately. (Coolant is supplied through the ocating Pin, not the.) For COOANT PIPE C 51 Application example Drilling High rigidity and runout accuracy provides stable machining. Cutter Workpiece Cutting Speed Cutting Feed Spindle Speed ø12 carbide drill C(SC) 70m/min 372mm/min 0.2mm/rev 1,860min -1 C 29

4 Improved versatility is achieved from the 32mm capacity illing Chuck by using parallel reduction collets and other accessories. A90 HC type SPINDE ANE : 90 [STANDARD TYPE] Designed for greater rigidity by having the face of the spindle bore in line with the center of the machine spindle. Also helps to minimize interference problems with ATC and storage problems within magazine ø80 ø32 97 Fixed ength A AX.3,000 min in.access Bore ø Exclusive STOP BOCK for is required. C HSK SHANK odel HSK-A100-A90/HC The standard Fixed ength A is 6mm. Other lengths are available upon request. 3. Wrench (FK80-90) is included. 4. is ordered separately. (Coolant is supplied through the ocating Pin, not the.) For STRAIHT COET 15 For COOANT PIPE C 51 For STOP BOCK 25 [HIH RIIDITY TYPE] Provided with a steel housing and reinforced ocating Pin assembly for applications where increased rigidity is required to perform various types of heavier machining ø80 ø in.access Bore ø Fixed ength A AX.3,000 min -1 R 21 Exclusive STOP BOCK for is required. odel HSK-A100-A90/HC32-240S The standard Fixed ength A is 6mm. Other lengths are available upon request. 3. Wrench (FK80-90) is included. 4. is ordered separately. (Coolant is supplied through the ocating Pin, not the.) S=80 type is available upon request. For STRAIHT COET 15 For COOANT PIPE C 51 For STOP BOCK 25 C 30

5 Spindle head is equipped with a short taper for quick changing of various adapters. A90 BUID-UP type SPINDE ANE : 90 [STANDARD TYPE] Designed for greater rigidity by having the face of the spindle bore in line with the center of the machine spindle. Also helps to minimize interference problems with ATC and storage problems within the magazine ø38.1 age ine for A35 Adapters Collar Compression Fixed ength A Draw Bar AX.3,000 min -1 Exclusive STOP BOCK for is required. odel HSK-A100-A90/AH The standard Fixed ength A is 6mm. Other lengths are available upon request. 3. is ordered separately. (Coolant is supplied through the ocating Pin, not the.) For A35 ADAPTER A 54 For STOP BOCK 25 [HIH RIIDITY TYPE] Provided with a steel housing and reinforced ocating Pin assembly for applications where increased rigidity is required to perform various types of heavier machining. For COOANT PIPE C ø38.1 age ine for A35 Adapters AX.3,000 min -1 6 Collar Compression Fixed ength A Draw Bar Exclusive STOP BOCK for is required. odel HSK-A100-A90/AH35-240S The standard Fixed ength A is 6mm. Other lengths are available upon request. 2. The angles of positioning pin to drive key groove and direction of cutting edge are adjustable from 0 to is ordered separately. (Coolant is supplied through the ocating Pin, not the.) S=80 type is available upon request. For A35 ADAPTER A 54 For STOP BOCK 25 C 31 For COOANT PIPE C 51

6 High rigidity bearings and substantial spindle design. ax. power transmission 20Kw. (at 1,0min -1 ) A90 FACE I type SPINDE ANE : (ø80) ø140 Clamp Bolt ø () 76.5 (117) in. bore for access ø206 C 57 Fixed ength A HSK SHANK AX.1,0 min -1 Exclusive STOP BOCK for is required. Simple 90 indexing of the cutter direction. The rotation of the cutting tool is in reverse direction of the machine spindle. (Accuracy 5 ) odel HSK-A100-A90-FA25.4S-200S Figures in ( ) indicate dimensions when 80mm diameter and mm high face mill cutter is mounted. 1. The standard Fixed ength A is 6mm. Other lengths are available upon request. 2. Coolant cannot be supplied through the ocating Pin. 3. The angles of positioning pin to drive key groove and direction of cutting edge are adjustable from 0 to is ordered separately. (Coolant is not supplied through the.) For STOP BOCK 25 For COOANT PIPE C Cutter head adjustable through 360 to any angle Following the release of the Adjusting Bolts (8 positions), the cutter direction can be easily adjusted. Indexing through 90 Cutter head is quickly indexable to 90 increments. (The Support Pin should be removed.) Adjusting Bolt Support Pin CAUTION : Indexing should not take place within the machine. C 32

7 A90 OA type SPINDE ANE : 90 For drilling Secure coolant supply through tool! Coolant through tool 1 ø Fixed ength H 60 AX. COOANT PRESSURE 2Pa S=80 ø18 AX.5,000min-1 Fixed ength H 1 ø Coolant is supplied from the Stop Block through the cutting tool. ø18 AX.5,000min The rotation of the cutting tool is in reverse direction of the machine spindle. odel Fig. 1 HSK-A 63-OA HSK-A100-OA Designed to be used with coolant. Never run dry. 2. Clamping nut must be ordered separately. Please order BABY PERFECT SEA (BPS) for your application. 3. is ordered separately. (Coolant is supplied through the ocating Pin, not the.) 4. Adjusting screw and wrench are included. 5. Fixed ength H and angle vary depending on machine models. Please specify your required dimensions Collet NUT BPS13 Exclusive STOP BOCK is required. Exclusive STOP BOCK for OA type is the same as HIH SPINDE & Hi JET HODER. Speed Ratio For STOP BOCK 25 For NEW BABY COET 3 For BABY PERFECT SEA 10 For COOANT PIPE C 51 C 33

8 A special head case, angled at 45, insures an accurate cutting angle. Utilizes NEW BABY CHUCK to assure high accuracy and versatility. A45 NBS type SPINDE ANE : øe 45 P Q in. Access Bore øf AX.min-1 Fixed ength A C 1 2 øe 45 P Q in. Access Bore øf HSK SHANK AX. min -1 Fixed ength A R18 (HSK-A63) (HSK-A100) The rotation of the cutting tool is in reverse direction of the machine spindle. Exclusive STOP BOCK is required. odel Fig. øe 1 2 P Q øf Collet Speed Ratio HSK-A63 -A45/NBS A45/NBS HSK-A100-A45/NBS A45/NBS The standard fixed length A: A63=8mm, A100=6mm. Other lengths are available upon request. 2. Clamping nut and wrench are included. Collet must be ordered separately. 3. The angles of positioning pin to drive key groove and direction of cutting edge are adjustable from 0 to New Baby Collet for endmill model NBC - EAA cannot be used. 5. is ordered separately. (Coolant is supplied through the ocating Pin, not the.) NBC10 NBC For NEW BABY COET 3 For STOP BOCK 25 For COOANT PIPE C 51 C 34

9 Suitable for all cutting angles. In addition to the cutter head being adjustable a full 360, the spindle also becomes easily and precisely adjustable from 0 to 90 by 1 increments. AU UNIVERSA type SPINDE ANE : 0 to turning radius AX.min Fixed ength A ø ø115 R turning radius ø ø46 65 ø AX.4,000min Fixed ength A The rotation of the cutting tool is in reverse direction of the machine spindle. Exclusive STOP BOCK is required. odel Fig. Collet Speed Ratio HSK-A 63-AU/NBS HSK-A100-AU/NBS NBC20 1. The standard fixed length A: A63=8mm, A100=6mm. Other lengths are available upon request. 2. The angles of positioning pin to drive key groove and direction of cutting edge are adjustable from 0 to Clamping nut and wrench are included. Collet must be ordered separately. 4. is ordered separately. (Coolant is supplied through the ocating Pin, not the.) For NEW BABY COET 3 For STOP BOCK 25 For COOANT PIPE C 51 EASIY ADJUSTABE SPINDE ANE FRO 0 to 90. PRECISE ANE ADJUSTENT Unique setting mechanism enables the spindle angle to be precisely set at 1 increments. EXCUSIVE CAPIN BOTS AND NUTS Specially selected materials and special design for clamping the head guarantee rigidity for even end milling applications. Application example Adjustable AU Universal Series expands Angle Head capabilities to accomplish various angular machining applications. Drilling or end milling on an angled surface Corner rounding Profiling achining draft angle of a mold C 35

10 Spindle angle is adjustable from 0 to 30. arge swivel flange assures high rigidity. AU AU30 type SPINDE ANE : 0 to 30 ight 0-30 Angle adjustment by aligning divisions C AX Spindle angle is easily adjustable from 0 to 30 using the scale indication on the body AX HSK SHANK Fixed ength A 147 ø AX 52.5 R18 Fixed ength A 162 ø ø46 45 AX AX.min-1 AX.4,000min-1 BI-PUS tools can be used in machining centers with conventional spindles. odel HSK-A 63-AU30/NBS HSK-A100-AU30/NBS The standard fixed length A: A63=8mm, A100=6mm. Other lengths are available upon request. 2. Clamping nut and wrench are included. Collet must be ordered separately. 3. The angles of positioning pin to drive key groove and direction of cutting edge are adjustable from 0 to is ordered separately. (Coolant is supplied through the ocating Pin, not the.) Fig. Collet Speed Ratio NBC For NEW BABY COET 3 For STOP BOCK 25 For COOANT PIPE C 51 Exclusive STOP BOCK is required. SETTIN DISK (included accessory) ø12 For the precise adjustment of spindle angle or direction. ø60 Clamp the Setting Disc into the angled spindle. Check the cutter alignment. Check the setting angle. C 36

11 Angular operation in a ø30mm bore (min.) is possible. odular heads enhance versatility. Head is aligned with spindle center for easy programing. SA BORE type Base Unit 177 Head Clamping Capacity: ø3 - ø4 A90-CA4S A90-CA4S Smallest ø30mm HSK-A63-AB A90-CA4S-128 Clamping Capacity: ø3 - ø6 A90-CA6S-45 1 Fixed ength A 2 R3 K Q P R18 HSK-A100-AB-196 (80) 1 Fixed ength A R A90-CA6S A90-CA6S-133 K Q P R18 (S=80) () AX.2,000min-1 AX.2,000min-1 Set odel Base Head HSK-A63-A90-CA4S CA6S HSK-A100-A90-CA4S CA6S HSK-A63- AB- 177 HSK-A100- AB- 196 A90-CA4S A90-CA6S A90-CA4S A90-CA6S The standard fixed length A: A63=8mm, A100=6mm. Other lengths are available upon request. 3. Coolant cannot be supplied through the ocating Pin. Fig. K 1 2 P Q Exclusive collets should be ordered separately. 5. S=80 type is available for HSK-A100 models upon request. 6. is ordered separately. (Coolant is not supplied through the.) For STOP BOCK 25 Exclusive STOP BOCK is required Speed Ratio 1:1.06 (Increase) 1:0.77 (Decrease) 1:1.06 (Increase) 1:0.77 (Decrease) S= For COOANT PIPE C 51 EXCUSIVE COET C 37 B øa odel øa B CA Use only a cutting tool shank with exactly the same diameter as the collet bore diameter. 2. Tolerance of the cutting tool shank must be within h7. odel CA øa B 22