B Footboard 1. C Headboard Foot 2. D Side Rail 2. E Cross Slat 4. G Support Beam 1. H Cross Slat Support Foot 3. I Finial 4. J Adjustable Leveller 3
|
|
- Branden Cunningham
- 5 years ago
- Views:
Transcription
1
2 B Footboard 1 C Headboard Foot 2 D Side Rail 2 E Cross Slat 4 F Cross Slat for Support Beam (with mounting position) 3 G Support Beam 1 H Cross Slat Support Foot 3 I Finial 4 J Adjustable Leveller 3 Page 2 OF 12
3 Label Picture Description QTY Bolt 9 Socket Cap Bolt 7 Spring Washer 9 Curved Washer 9 Allen Key 1 Before Beginning Assembly: NOTE: 2 OR 3 PEOPLE ARE RECOMMENDED TO ASSEMBLE THIS BED. TO AVOID DAMAGE DURING ASSEMBLY, IT SHOULD BE ASSEMBLED ON A SOFT SURFACE. Page 3 OF 12
4 Page 4 OF 12
5 Overview Headboard(A) Cross Slat for Support Beam (with mounting position)(f) Cross Slat Support Foot(H) Side Rail (D) Footboard(B) Headboard Foot(C) Cross Slat(E) Support Beam(G) Finial(I) FRONT FACING This BED has multiple parts and may require up to some 30 minutes to assemble. To give you an overview of the BED parts, the above picture is to help you put the various parts into perspective. Please read through the instructions below to familiarise yourself with the parts and steps before assembly. Page 5 OF 12
6 Step 1 REMOVE all bed parts from packaging and lay on a soft, flat surface. SCREW four Finials(I) into the prethreaded mounting points at the four posts of the Headboard(A) and Footboard(B). TIGHTEN fully by hand. Step 2 Align the mounting positions of the Headboard(A) and the Headboard Foot(C). Insert the Headboard Foot(C) into the Headboard(A), as shown in above picture. Repeat this process with the other Headboard Foot(C). Page 6 OF 12
7 Step 3 With assistance from your adult partners, attach the Side Rail(D) to Headboard(A) and Headboard Foot(C) using Bolt( ), Spring Washer( ), and Curved Washer( ) with Allen Key( ). At this stage, only loosely tighten the Bolts. Step 4 Front Side Page 7 OF 12
8 Attach the other End of Side Rail(D) to Footboard(B) using Bolt( ), Spring Washer( ), and Curved Washer( ) with Allen Key( ). At this stage, only loosely tighten the Bolts. Step 5 A B Repeat Step 3 through Step 5, to attach the other Side Rail(D) between Headboard(A) and Footboard(B). Now, in a sequential manner, proceed to tighten all Bolts( ) with Allen Key( ). Page 8 OF 12
9 Step 6 Step 6.1- First attach Adjustable Leveller(J) into Cross Slat Support Foot(H). Step 6.2- Then attach Cross Slat Support Foot(H). through the mounting positions of the Support Beam(G) and Cross Slat for Support Beam(F) Screw the Adjustable Leveller(J) into the Cross Slat Support Foot(H). Place three Cross Slat for Support Beam(F) parallel on the ground, at equal distances of about one meter. Align the mounting positions in the center of each Cross Slat for Support Beam(F) with one of the mounting positions on the Support Beam(G), forming a 90 degree angle at each joint. Then Screw in the Cross Slat Support Foot(H) through the mounting positions of the Support Beam(G) and Cross Slat for Support Beam(F) by hand until it tighten fully. Repeat this process with the remaining two Cross Slat Support Feet(H). This completed frame forms the Mattress Support Frame. Page 9 OF 12
10 Step 7 With the support of your Partner, turn over the assembled Mattress Support Frame. Lift and place the pre-assembled Mattress Support Frame into the Bed Frame. Align the edges of the Mattress Support Frame into the U-Shaped Brackets on the Side Rails(D). Step 8 Page 10 OF 12
11 Screw the Socket Cap Bolt( ) into the Cross Slat for Support Beam(F) and U-Shaped Bracket of the Side Rail(D). Do not overtighten the Bolts. Step 9 Place the Cross Slat(E) into the U-Shaped Bracket of the Side Rail(D). Make sure all parts are in place. Now proceed to fully secure and tighten ALL Bolts at ALL joints. Your bed is ready for use. Caution: This bed can only be used on a flat, level surface. Page 11 OF 12
12
Queen Size Bed. CAUTION: You must read this before you proceed.
Queen Size Bed CAUTION: You must read this before you proceed. NOT : This Bed is NOT a TOY. Keep your child / children at bay during the assembly process. The BD is HAVY. To prevent injury to yourself
More informationQueen Size Bed. CAUTION: You must read this before you proceed.
Queen Size Bed CAUTION: You must read this before you proceed. NOTE : This Bed is NOT a TOY. Keep your child / children at bay during the assembly process. The BED is HEAVY. To prevent injury to yourself
More informationK-Emily Twin Nkl Canopy Bed K-Emily Twin Pink Canopy Bed K-Emily Purple Twin Canopy Bed
Parts and Hardware List A. Headboard 1 pc B. Footboard 1 pc C. Side Rails 2 pcs D. Support Slats 3 pcs E. Leg Supports 3 pcs F. Long Canopy Rails 2 pcs G. Short Canopy Rails 2 pcs H. Long Posts 2 pcs I.
More informationQueen Wingback Bed King Wingback Bed
Parts and Hardware List A. Side Rails with Attachment Hooks 2 pcs B. Foot Rail 1 pc C. Head Rail 1 pc D. Center Support Slat 1 pc E. Leg Supports 3 pcs F. Support Slats 4 pcs G. Flat Washers 8 pcs H. Lock
More informationO-Sullivan King 4 Poster Bed O-Sullivan Queen 4 Poster Bed Parts and Hardware List
Parts and Hardware List A. Left Headboard Post 1 pc B. Right Headboard Post 1 pc C. Left Footboard Post 1 pc D. Right Footboard Post 1 pc E. Headboard Panel 1 pc F. Footboard Rail 1 pc. Spindles 4 pcs
More informationCaution : You must read this before you proceed. Loveseat. Page 1 OF 11
Caution : You must read this before you proceed Loveseat Page 1 OF 11 Label Picture Description QTY A Chair Back with Seat 1 B Cushion 1 C Pillow 2 D Back Rail 1 Left Armrest 1 F Right Armrest 1 Seat frame
More informationNest Storage Bed in Fabric Designed by Niels Bendtsen
General Assembly Instructions Assembly requires two people and 1 2 hours. Assemble bed as near as possible to final resting area. Identify all parts and hardware before beginning assembly. Retain packaging
More informationPRINCESS SINGLE BED WITH TRUNDLE
PRINCESS SINGLE BED WITH TRUNDLE If you have any questions regarding assembly or if you are missing parts, do not return this item to Sam s Wholesale Club Please call our customer service number and have
More informationL.L.Bean. Wooden Slat Bed
L.L.Bean Wooden Slat Bed Thank you for purchasing our Slat Bed. Assembly of this product requires A Phillips head screwdriver. We have found it helpful to have a second person present in at least one step
More informationRiverside. Windhaven Queen Storage Bed Assembly Instructions
Queen Storage Bed Page 1 of 7 2 pcs. 4 pcs. 4 pcs. 4 pcs. 2 pcs. 5/0 Queen Storage Bed 50773 -- 5/0 Storage Footboard w/platform Note: The 50773 Storage Footboard can be used with the 50770 Panel Headboard
More informationPRE-ASSEMBLY PREPARATION 1/6. Please ensure instructions are read in full before attempting to assemble this product.
PRE-ASSEMBLY PREPARATION Please ensure instructions are read in full before attempting to assemble this product. Necessary Tools Please check the pack contents before attempting to assemble this product.
More informationRiverside. Oakmont Queen Storage Bed Assembly Instructions
Queen Storage Bed Page 1 of 7 8 pcs. 8 pcs. 1 pc. 1 pc. 8 pcs. 8 pcs. 8 pcs. 8 pcs. 1 pc. 1 pc. 20270 --5/0 Sleigh Headboard 20274 --5/0-6/6 Bed Rails 20273 -- 5/0 Storage Footboard, Panels, Slats Queen
More informationE E. 20 pcs. Long Bolt 5/16 x 2-1/4. 20 pcs. Flat Washer 5/ pcs. Spring Washer 5/16. 4 pcs. Long Screws M8 x 30mm. 20 pcs. Short Screw M8 x 15mm
C A L L U M 6 - R A WER T W I N & FUL L S T O R A G E C A N O P Y B E I N S T R U C T I O N S PARTS INCLUE: A [1] HEABOAR PANEL B [2] HEABOAR POST C [2] FOOTBOAR POST [2] SIE RAWER FRAME E [2] SHORT SIE
More informationAll Restoration Hardware bunk beds are designed to meet the highest safety standards and comply with all U.S. and Canadian Bunk Bed regulations.
All Restoration Hardware bunk beds are designed to meet the highest safety standards and comply with all U.S. and Canadian Bunk Bed regulations. Page 1 of 13 Assembly Instructions Callum Storage Twin Bunk
More informationStock Code: 803/44302 King. Stock Code: 803/44303 Super King Stock Code: 803/44301
John Lewis Rouen Bed Double Stock Code: 80/440 King Stock Code: 80/440 Super King Stock Code: 80/440 Thank you for purchasing this Rouen Bed. Please read the instructions carefully before use to ensure
More informationVince Ottoman Bed Frame
Vince Ottoman Bed Frame Assembly Instructions - Please keep for future reference 355/4845 330/7281 Dimensions Depth x Width x Height 213cm x 148cm x 111cm (Double) 223cm x 163cm x 111cm (King) Important
More informationWhalen Furniture Mfg. Inc. Factory No. 4 Page # 1
ADULT ASSEMBLY REQUIRED DUE TO THE PRESENCE OF SMALL PARTS, SHARP POINTS, SHARP EDGES If you have any questions regarding assembly or if you are missing parts, do not return this item to Sam s Wholesale
More informationLoft Bed Safety Warning
Loft Bed Safety Warning * Follow the information on the warnings appearing on the upper bunk end structure and on the carton. Do not remove the warning label from bed. * Always use the recommended size
More informationBarnwood Bunk Bed Assembly Instructions
Barnwood Bunk Bed Assembly Instructions Parts needed: 1 1 2 1 8 4 10 1 10 16 1 - Tools Needed for Assembly: Cordless Drill with Phillips Head Ratchet w/9/16 socket 9/16 Wrench T-25 Bit Headboard Footboard
More informationPlease keep for future reference. Dimensions (5') Length cm. Width - 160cm Height cm
Sheridan Ottoman bed Assembly Instructions hygena Please keep for future reference 25/942 /659 56/4268 56/9 /7268 57/499 40/422 57/202 8/8846 Dimensions (4') Length - 202.5cm Width - 0cm Height - 84.5cm
More informationL.L.Bean. Platform Bed
L.L.Bean Platform Bed Thank you for purchasing our Platform Bed. Assembly of this product requires a Phillips head and a flat head screwdriver. We have found it helpful to have a second person present
More informationBeadboard Curved Bed Queen Size
Beadboard Curved Bed Queen Size PRE- ASSEMBLY: Remove all parts and hardware from the box, and lay them out on a carpeted or scratch-free work surface. The shipping box provides an ideal work surface,
More informationAll Restoration Hardware bunk beds are designed to meet the highest safety standards and comply with all U.S. and Canadian Bunk Bed regulations.
baby&child RESTORATION HARDWARE All Restoration Hardware bunk beds are designed to meet the highest safety standards and comply with all U.S. and Canadian Bunk Bed regulations. Page 1 of 13 Assembly Instructions
More informationRouen Storage Bed. John Lewis PRE-ASSEMBLY PREPARATION. Double King Size. Stock code: 803/44304 Stock code: 803/44305
John Lewis Double King Size Rouen Storage Bed Stock code: 80/4404 Stock code: 80/4405 Thank you for purchasing this Rouen Storage Bed. Please read the instructions carefully before use to ensure safe and
More informationAssembling Insert NO. ITEM DESCRIPTION QTY. CALLUM 6-DRAWER TWIN/FULL STORAGE CANOPY BED. Long Bolt 5/16 x 2-1/4 20 pcs. 20 pcs.
CALLUM 6-RAWER TWIN/FULL STORAGE CANOPY BE PARTS INCLUE: A [1] HEABOAR PANEL B [2] HEABOAR POSTS C [2] FOOTBOAR POSTS [2] SIE RAWER FRAME E [2] SHORT SIE RAILS F [2] STORAGE BASE G [1] SLAT ROLL H [8]
More informationAll Restoration Hardware bunk beds are designed to meet the highest safety standards and comply with all U.S. and Canadian Bunk Bed regulations.
All Restoration Hardware bunk beds are designed to meet the highest safety standards and comply with all U.S. and Canadian Bunk Bed regulations. Page 1 of 13 Assembly Instructions Callum Storage Twin Bunk
More informationLAGUNA BUNK BED - FULL OVER FULL INSTRUCTIONS
Made in Vietnam Distributed in the U.S.A. by: Restoration Hardware Baby & Child 11640 Harrel St. Suite B Mira Loma, CA 91752 www.rhbabyandchild.com All Restoration Hardware Bunk Beds are designed to meet
More informationEmily Storage Bed Stock code king stone: 810/80505 Stock code king mink : 803/46405 Stock code king grey : 803/46507
John Lewis Stock code double mink : 80/46404 Stock code double stone : 80/80504 Stock code double grey : 80/46506 Emily Storage Bed Stock code king stone: 80/80505 Stock code king mink : 80/46405 Stock
More informationLEAMINGTON BED (DOUBLE)
LEAMINGTON BED (DOUBLE) ASSEMBLY INSTRUCTIONS. IMPORTANT - RETAIN FOR FUTURE REFERENCE - READ CAREFULLY. Tools Needed Helpline If you have any problems with this product or require any replacement fittings
More informationAssembling Insert NO. ITEM DESCRIPTION QTY. CALLUM 3-DRAWER TWIN/FULL STORAGE CANOPY BED. Long Bolt 5/16 x 2-1/4 20 pcs. 20 pcs.
CALLUM 3-DRAWER TWIN/FULL STORAGE CANOPY ED PARTS INCLUDED: A [1] HEADOARD PANEL [2] HEADOARD POSTS C [2] FOOTOARD POSTS D [1] LONG SIDE RAIL E [1] SIDE DRAWER FRAME F [2] SHORT SIDE RAILS G [1] STORAGE
More informationWARNING: Read all instructions before assembling this product. KEEP INSTRUCTIONS FOR FUTURE USE
MARCELINE TWIN OVER TWIN BUNK BED INSTRUCTIONS Distributed in the U.S.A by: Restoration Hardware Baby & Child 11640 Harrel St. Suite B Mira Loma, California 91752 rhbabyandchild.com Distributed in Canada
More informationCATALINA BUNK BED TWIN OVER TWIN
pottery barn kids ATALINA BUNK BED TWIN OVER TWIN ASSEMBLY INSTRUTIONS www.potterybarnkids.com Date: 2011 July-23 Page 1 of 8 WARNING: Failure to follow these warnings and assembly instructions could serious
More informationRiverside. Harbor Hill Queen Storage Bed Assembly Instructions
Queen Storage Bed Page 1 of 7 8 pcs. 8 pcs. 1 pc. 2 pcs. 3 pcs. 3 pcs. 4 pcs. 4 pcs. 4 pcs. 1 pc. 1 pc. 8 pcs. 8 pcs. 8 pcs. 2 pcs. 8 pcs. 1 pc. 25770 -- 4/6-5/0 Panel Headboard (NOTE: the 25775 Leather
More informationStrata. urniture. Mission Rim Instructions. Parts in the Arm Box: Parts in the Body Box:
1A Watch our assembly videos at www.strataf.com/videos.html Parts in the Arm Box: Arm - Outside View Arm - Inside View Corbels x 4 1B Parts in the Body Box: Back Deck x 1 Seat Deck x 1 with the Feet attached
More information20 pcs. Long Bolt 5/16 x 2-1/4. 20 pcs. Flat Washer 5/ pcs. Spring Washer 5/16. 4 pcs. Long Screws M8 x 30mm. 20 pcs. Short Screw M8 x 15mm
A L L U M 3-D R A W R T W I N & FUL L S T O R A G A N O P Y D I N S T R U T I O N S PARTS INLUDD: A [1] HADOARD PANL [2] HADOARD POST [2] FOOTOARD POST D [1] LONG SID RAIL [1] SID DRAWR FRAM F [2] SHORT
More informationMyra Bed Room King Storage Bed Assembly Instructions. Hardware and Parts packed with the Headboard. One Left & One Right H-C
email: Headboard Panel info@riverside-furniture.com King Storage Bed Hardware and Parts packed with the Headboard Headboard Post Headboard Stretcher Page 1 of 7 H-A One Left & One Right H-C M5/16"-18 x
More informationStrata. urniture. Adriana Instructions. Parts in the Arm Box: Parts in the Body Box: Watch our assembly videos at
1A Watch our assembly videos at www.strataf.com/videos Parts in the Arm Box: Arm - Outside View Arm - Inside View 1B Parts in the Body Box: Back Deck x 1 Seat Deck x 1 with the Feet attached Back Panel
More informationRiverside. Harbor Hill King Storage Bed Assembly Instructions
King Storage Bed Page 1 of 7 8 pcs. 8 pcs. 1 pc. 2 pcs. 6 pcs. 3 pcs. 4 pcs. 4 pcs. 4 pcs. 1 pc. 1 pc. 2 pcs. 8 pcs. 8 pcs. 8 pcs. 8 pcs. 25780 -- 6/0-6/6 Panel Headboard (NOTE: the 25785 Leather Headboard
More informationMia Bed. John Lewis. Double King size PRE-ASSEMBLY PREPARATION. Stock Code: 810/84103 Stock Code: 810/84104
John Lewis Mia Bed ouble King size Stock ode: 80/80 Stock ode: 80/80 Thank you for purchasing this Mia Bed. Please read the instructions carefully before use to ensure safe and satisfactory operation of
More informationFull Size Bed CAUTION: You must read this before you proceed.
Full Size ed CUTON: You must read this before you proceed. NOTE : This ed is NOT a TOY. Keep your child / children at bay during the assembly process. The ED is EVY. To prevent injury to yourself or damage
More informationBLUE ANT FURNITURE TITLE: FULL BUNKBED INSTRUCTIONS 10/10/09 DWG. NO. INSTR_888-FULL-BUNK SHEET 1 OF 9
BLUE ANT FURNITURE TITLE: FULL BUNKBED INSTRUCTIONS 10/10/09 DWG. NO. INSTR_888-FULL-BUNK SHEET 1 OF 9 WARNING: Failure to follow these warnings and assembly instructions could result in serious injury.
More informationEmily Bed. John Lewis PRE-ASSEMBLY PREPARATION. Mink Grey Stone
John Lewis Mink Grey Stone Emily Bed Stock code: Small ouble - 80/60, ouble - 80/60, King - 80/60 Stock code: Small ouble - 80/60, ouble - 80/60, King - 80/60 Stock code: ouble - 80/800, King - 80/800
More informationProduct Information. Brass & Cast Bedsteads
Product Information Brass & Cast Bedsteads parts CheCk list 4 0,4 6,5 0,6 0 slatted FraMe 01 headend 1 02 Footend 1 03 head end extension legs 2 04 side rails 2 05 end cross bar 2 06 Center cross bar 1
More informationStrata. urniture. Addison Instructions. Parts in the Arm Box: Parts in the Body Box: Watch our assembly videos at
1A Watch our assembly videos at www.strataf.com/videos.html Parts in the Arm Box: Arm - Outside View Arm - Inside View Corbels x 4 1B Parts in the Body Box: Back Deck x 1 Seat Deck x 1 Back Panel x 1 with
More informationBEADBOARD LOFT BED ASSEMBLY INSTRUCTIONS
BEADBOARD LOFT BED ASSEMBLY INSTRCTIONS Date: 2013-Apr.-25 www.pbteen.com Page 1 of 10 ARNING: Failure to follow these warnings and assembly instructions could result in serious injury or death. To prevent
More informationASSEMBLY INSTRUCTIONS COMPANIONS BED BY STUDIOILSE
AMBY NRCN CMPANN B BY PAR 1x Headboard 13x imber slats (14 for Cal King) 1 1x Central beam 2x ide beams HARWAR (4x) niversal connector (12x) M8x3 bolts (4x) M8x4 Metal dowel (26x) M5 bolts 1x Footboard
More informationTHIS PRODUCT IS NOT INTENDED FOR INSTITUTIONAL OR COMMERCIAL USE. Style #: Lot: Date:
Read all instructions before assembly and use. KEEP INSTRUCTIONS FOR FUTURE USE. ADULT ASSEMBL REQUIRED Due to the presence of small parts during assembly, keep out of reach of children until assembly
More informationBoris toddler bed. Instruction manual. Important!
Boris toddler bed Instruction manual Important! KEEP FOR FUTURE REFERENCE 1 Thank you for purchasing this Boris toddler bed. Please read the instructions and warnings carefully before use to ensure safe
More informationINSTRUCTION BOOKLET #C0 Watch step by step installation instructions at: https://www.wallbedsbywilding.com/wallbed-installation-studio-series/ WARNING! ALL MURPHY/WALLBED SYSTEMS CONTAIN STORED ENERGY.
More informationFor Wallbed models: KING SIZE INSTRUCTION BOOKLET #C1 Watch step by step installation instructions at: https://www.wallbedsbywilding.com/wallbed-installation-studio-series/ WARNING! ALL MURPHY/WALLBED
More informationIMPORTANT: BEFORE STARTING TO ASSEMBLE THE BED - P LEASE READ THESE INSTRUCTIONS CAREFULLY. Qty Drawer Side Panels 4 3 Side Panels
DANBURY TORA BD A RAD this sheet prior to assembly to familiarise yourself with the various stages of construction. Carefully open the pack supplied and check the contents against the parts and fittings
More informationAssembly Aid. One of the packages contains the required bolts, washers and nuts for final assembly
Assembly Aid Open the box and arrange the pieces similar to what you see here. Assembly instructions as well as the list of tools required for assembly are also in the box. One of the packages contains
More informationMANHATTAN STORAGE BED
MANHATTAN TORA BD A RAD this sheet prior to assembly to familiarise yourself with the various stages of construction. Carefully open the pack supplied and check the contents against the parts and fittings
More informationBLYTHE BUNK BED TWIN OVER TWIN
pottery barn kids BLYTHE BUNK BED TWIN OVER TWIN www.potterybarnkids.com Date: 2014-Sept.-25 Page 1 of 11 WARNING:. Failure to follow these warnings and assembly instructions could result in serious injury
More informationBunk Bed Assembly Instructions
1415-9 Bunk Bed Assembly Instructions -Use Only standard Twin size mattress (75 long x 39 wide)- -Maximum mattress thickness must not exceed 8 - -Surface of mattress must be at least 5 below the upper
More informationStrata. urniture Watch our assembly videos at Denali Arms. Parts in the Arm Box: Hardware in this Box:
1A Denali Arms Watch our assembly videos at www.strataf.com/videos.html Parts in the Arm Box: Arm - Outside View Arm - Inside View 1B Hardware in this Box: (80mm) x 8 Barrel Nuts x 8 x 8 Wood Buttons x
More informationImportant for Ottoman and other gas lift beds
Important for Ottoman and other gas lift beds Note: The bed base is in the upright position when first assembled as the gas lifts are fully extended during shipment for safety. After assembly a firm downward
More informationAssembly Instructions
Assembly Instructions T Tinwell picnic bench Before you commence the assembly process we recommend that you read these instructions thoroughly beforehand to familiarise yourself with the assembly process
More informationhttps://www.wallbedsbywilding.com/wallbed-installation-studio-series/
For Wallbed models: KING SIZE INSTRUCTION BOOKLET #C1 Watch step by step installation instructions at: https://www.wallbedsbywilding.com/wallbed-installation-studio-series/ WARNING! ALL MURPHY/WALLBED
More informationMary bed Small double stock number: Double stock number: King stock number:
Mary bed Small double stock number: 803 42603 ouble stock number: 803 4260 King stock number: 803 42602 Small double H30 W29 99cm ouble H30 W44 99cm King H30 W59 209cm Thank you for purchasing the Mary
More informationAVA REGENCY BUNK BED TWIN OVER FULL
pottery barn kids AVA REGENCY BUNK BED TWIN OVER FULL www.potterybarnkids.com Date: 2016-Feb.-18 Page 1 of 14 WARNING: Failure to follow these warnings and assembly instructions could result in serious
More informationASSEMBLY INSTRUCTIONS VALENTINO 2 DRAWER 5 BED
ASSEMBLY INSTRUCTIONS VALENTINO 2 DRAWER 5 BED IMPORTANT: READ THESE INSTRUCTIONS CAREFULLY BEFORE ASSEMBLING OR USING YOUR VALENTINO 2 DRAWER 5 BED FRAME. PLEASE KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE.
More informationUNIT SHOULD BE INSTALLED BY 2 OR MORE PERSONS.
ASSEMBLY INSTUCTIONS ITEM NO: I07-412-WB/PEP Queen ails Thank you for purchasing this quality product. Be sure to check all packing material carefully for small parts that may come loose inside the carton
More informationFull Size Bed The Jocelyn
Full Size Bed The Jocelyn www.andrewharriswoodwork.com Page 1 of 14 Introduction This plan makes a bead frame for a full size mattress. Although a full size mattress should be standard size. Please make
More informationWARNING: Failure to follow these warnings and assembly instructions could
OXFORD BUNK BED TWIN OVER TWIN & FULL OVER FULL For Bunk Bed Twin Over Twin WARNING: Failure to follow these warnings and assembly instructions could result in serious injury or death. To help prevent
More informationNapa 4 in1 Crib Assembly Instruction
Napa 4 in1 Crib Assembly Instruction Important Information: Read all instructions BEFORE assembling crib. KEEP INSTRUTIONS FOR FUTURE USE. Page 1 CRIB WARNINGS! WARNING - R ruc bef r r b. KEEP INSTRUCTIONS
More informationYardley Single Ottoman Assembly Instructions
Yardley Single Ottoman Assembly Instructions Dimensions mm Double Length Width eight 2040 10 910 eed assistance? Call: 0344 292 0000 elpful advise before you begin: 1. We suggest you spend a short time
More informationTwin Twin Oak Bunk Bed Assembly Instructions
Twin Twin Oak Bunk Bed Assembly Instructions -Use Only standard Twin size mattress (75 long x 39 wide)- -Maximum mattress thickness must not exceed 8 - -Surface of mattress must be at least 5 below the
More informationSide Mount INSTRUCTION BOOKLET #C122 BED STYLE: PARK CITY
Side Mount BED STYLE: PARK CITY INSTRUCTION BOOKLET #C1 WARNING! ALL MURPHY/WALLBED SYSTEMS CONTAIN STORED ENERGY. FAILURE TO USE AND FOLLOW THESE INSTRUCTIONS DURING THE INSTALLATION PROCESS COULD RESULT
More informationINSTRUCTION BOOKLET #C10 Watch step by step installation instructions at: https://www.wallbedsbywilding.com/wallbed-installation-studio-series/ WARNING! ALL MURPHY/WALLBED SYSTEMS CONTAIN STORED ENERGY.
More informationAddison Double Cot RECYCLED. Assembly and care instructions. Cot. Mattress and accessories not included. Double Bed - Optional Kit
R Addison Double Cot Assembly and care instructions This cot can be assembled in a number of configurations Instructions for all configurations are included in this manual Cot Mattress and accessories
More informationCascade Bed Collection Glazed Black Cherry finish Assembly Instructions
ascade Bed ollection Glazed Black herry finish odel # 1877 ascade Queen Bed odel # 1882 ascade King Bed IPORTAT OTES: For normal household use only. ot recommended to use these units in a commercial setting.
More informationGarden. Newland picnic bench. Package contents. Tools required ASSEMBLY INSTRUCTIONS
Garden Furniture Direct T: 03333 448 121 ASSEMBLY INSTRUCTIONS Newland picnic bench Before you commence the assembly process we recommend that you read these instructions thoroughly beforehand to familiarise
More informationASSEMBLY INSTRUCTIONS
Wood Frame ASSEMBLY INSTRUCTIONS CARE INSTRUCTIONS Your bed frame does not require special waxing or oiling. For routine cleaning, follow the instructions on the care card. You may also dust at any time
More informationASSEMBLY INSTRUCTIONS. IMPORTANT - RETAIN FOR FUTURE REFERENCE - READ CAREFULLY.
WESTCOTT STORAGE BED ASSEMBLY INSTRUCTIONS. IMPORTANT - RETAIN FOR FUTURE REFERENCE - READ CAREFULLY. Tools Needed Helpline If you have any problems with this product or require any replacement fittings
More informationASSEMBLY INSTRUCTIONS PLATFORM BED BY NERI&HU
ASSMBLY STCTOS PLATFOM BD BY PATS 1x Central beam 13x Timber slats (14 for Cal King) 1x Footboard ADWA (8x) niversal connector (8x) M8x4 Metal dowel 1x eadboard with arms 1x eadboard beam 2x Side beams
More informationAssembly Instructions
Assembly Instructions T Tinwell picnic bench Before you commence the assembly process we recommend that you read these instructions thoroughly beforehand to familiarise yourself with the assembly process
More informationShowpiece Cabinet Integrated Stand For 32" - 52" LCD HDTV
Showpiece Cabinet Integrated Stand For 32" - 52" LCD HDTV Installation and Assembly Instructions 2009 Incredible Technologies Inc. Version 0109 Showpiece Cabinet Integrated Stand for 32" - 52" LCD HDTV
More informationUser Instructions Multiline Otter Scoreboard Caddy Assembly
List of parts: User Instructions Multiline Otter Scoreboard Caddy Assembly Single Caddy Double Caddy 1 1 Base assembly with attached wheels 2 4 1 1 2 4 4 8 10 20 12 Uprights (60 or 74 aluminum extrusion)
More informationVictoria Bed. Please ensure instructions are read in full before attempting to assemble this product.
Victoria Bed Stock code: 803/67902 Please ensure instructions are read in full before attempting to assemble this product. Please check the pack contents before attempting to assemble this product. A full
More informationAuthority22 Transition Roller for Existing Machines
Authority22 Transition Roller for Existing Machines Upgrade Packaging 1 per Authority22 14-860241-000 Package Transition Roller Upgrade Kit NOTE: Due to installation requirements, the parts will be packaged
More informationBonn bed Stock number small double: Stock number double: Stock number king:
Bonn bed Stock number small double: 80 570 Stock number double: 80 570 Stock number king: 80 570 Small double H98 W D0cm Double H98 W D0cm King H98 W Dcm Thank you for purchasing the Bonn bed. Please read
More informationDAYBED TODDLER BED DOREL ASIA. NEED HELP! Tel #: CALL US FOR ASSISTA MODEL NO: WM6239 ESPRESSO UPC CODE:
DOREL ASIA DAYBED TODDLER BED MODEL NO: ESPRESSO UPC CODE: 0-65857-16279-0 NOTE: THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE. Lot number: (TAKEN
More informationIDR assembly instructions:
IDR assembly instructions: Required Tools: 2 X 12mm Open End Wrench 14mm open end wrench #2 Phillips Head Screw Driver (Drill with adjustable torque clutch recommended) 8mm nut driver (Supplied in IDR-AK)
More informationL A G U N A F U L L O V E R F U L L B U N K B E D I N S T R U C T I O N S
ll Restoration ardware Bunk Beds are designed to meet the highest safety standards and comply with all U.S. and Canadian Bunk Beds regulations. WRNING: Read all instructions before assembling this product.
More informationCATALINA STEP BED ASSEMBLY INSTRUCTIONS
pottery barn kids CATALINA STEP BED ASSEMBLY INSTRUCTIONS www.potterybarnkids.com Date: 2013-Apr-26 Page 1 of 8 WARNING: Failure to follow these warnings and assembly instructions could result in serious
More informationWilton 135cm Bedstead
John Lewis Double Wilton 15cm edstead Stock number natural: 80/4290 Stock number white: 80/42421 Stock number dark: 80/42521 For product support or spare parts please call the John Lewis Helpline; Tel:01244-689949
More informationAssembly Instruction
Assembly nstruction TWN - FU BUNK BED TWN - FU BUNK BED HARDWARE ST NO 80mm Bolt 22 pcs 6 60mm Bolt 0 pcs 7 3 30mm Bolt 2 pcs 8 4 32mm Screw 6 pcs 9 5 Allen Key M4 NO 2 DRAWNG onimmixce (8(88(n DESCRPTON
More informationYardley Double Ottoman Assembly Instructions
Yardley Double Ottoman Assembly nstructions Dimensions mm Double Length Width eight 2040 1480 910 Need assistance? all: 0344 292 0000 elpful advise before you begin: 1. We suggest you spend a short time
More informationTABLE MKI small with Basin and under rack brackets kit
TABLE MKI small with Basin and under rack brackets kit TBRA024 INSTALL TIME: 15 mins IMPORTANT WARNING! IT IS CRITICAL THAT ALL FRONT RUNNER PRODUCTS BE PROPERLY AND SECURELY ASSEMBLED AND ATTACHED TO
More informationASSEMBLY INSTRUCTIONS 111 AND 113 DUBOIS BEDS BY NICHETTO
ASSMBLY SRUS 111 AD 113 DUBS BDS BY 1 PARS 1x eadboard 2x eadboard wings 1x eadboard beam 1x Beech linking beam 1x Footboard 2x Sidebeams 1x entral beam 15x imber slats (: alifornia King size has 16x imber
More informationEPPA2-KIT DUAL MONITOR ARM CONVERSION
EPPA2-KIT DUAL MONITOR ARM CONVERSION EPPA2-KIT Rev A 10/17 Model EPPA2-KIT-XXX ASSEMBLY AND ADJUSTMENT EPPA2-KIT PARTS AND TOOLS PLEASE REVIEW these instructions before beginning the assembly and adjustment
More informationtable brackets for mki table incl latch TBRA020
table brackets for mki table incl latch TBRA020 INSTALL TIME: 15 mins IMPORTANT WARNING! IT IS CRITICAL THAT ALL FRONT RUNNER PRODUCTS BE PROPERLY AND SECURELY ASSEMBLED AND ATTACHED TO YOUR VEHICLE. IMPROPER
More informationKEATING BED. Date: 02-Apr-15 Page 1 of 7 Rev:
KEATING E ate: 02-Apr-5 www.williams-sonoma.com Page of 7 Important Safety Instructions: Please read all instructions carefully before assembling. For your safety, assembly by two or more adults is strongly
More informationModel No.: UPC CODE: Color
DOREL ASIA BUNK BED Model No.: UPC CODE: Color WM3911-13 0-65857-15752-9 PINE WM3921-13 0-65857-15700-0 LIGHT CHERRY WM3921E2 0-65857-16529-6 MOCHA WM3921B-DC 0-65857-16887-7 BLACK WM3921W-DC-13 0-65857-16277-6
More informationPlease Do Not Return Your Item to the Retailer
Please Do Not Return Your Item to the Retailer Thank you for your purchase of an Epic Furnishings item You should enjoy many years of trouble free, dependable use If for any reason you are missing parts,
More informationGas Lift Bed Assembly Instructions (please retain this instruction for future reference)
Gas Lift Bed Assembly Instructions (please retain this instruction for future reference) To assemble your bed you have been supplied with 12 x 12mm button head bolts, 4 x 15 mm Philips Head Screws, 6 Philips
More informationinstallation guide 1 GUIDE#: PWB-wwpontoon-pol-004
f250 pontoon WAKEBOARD tower installation guide INSTALLATION SUPPORT 1 important information This WakeWorks tower fits Pontoon boats with 96 to 102 inch wide beam widths. This measurement is taken from
More informationHearts Bed With 4 Poster Frame
Hearts ed With Poster Frame ssembly Instructions - Please keep for future reference 2/80 /9 imensions Width - 97cm epth - 9cm Height - 89cm Important - Please read these instructions fully before starting
More informationSOCCER TABLE. Assembly Instructions
Updated: 9/30/2015 SOCCER TABLE Assembly Instructions Table of Contents Parts Identifier... 3 Hardware Identifier. 4 Table Assembly Instructions... 5 Table Assembly Pictures..... 6, 7, 8 2 Page Parts Identifier
More information