Invision Product Data and Care Instructions
|
|
- Shonda Gregory
- 5 years ago
- Views:
Transcription
1 Invision Product Data and Care Instructions General Information Invision sheets are innovative design elements, made in Germany. Fabrics, metals or organic materials such as grass, leaves or flowers are embedded in polyester (PETG) by means of an especially developed and licensed process. advantages of Invision applications of Invision the sheets can be easily and rapidly thermoformed at low energy consumption without predrying white retaining their frosted surface good impact strength available in thicknesses from 3 to 24 mm other colours and measurements on demand also available with UV protection suitable for outdoor usage (with UV protection), highly weatherproof food proof except for the version with UV protection exclusive appearance applications: interior design: partition walls, furniture, walland counter coverings, light elements etc. hotels, trade, industry, offices etc. booth building: walls, ceilings, floorings, bars, colums etc. shop-fitting: system concepts and individual solutions POS for outdoor and indoor usage displays kitchen backwalls lamp covers advertising pillars doors, partitions / sliding doors sculptures shower cabins Storage Store Invision sheets in horizontal position on a flat surface and provide adequate support to avoid deformation of the product. It is recommended not to remove the protective film prior to installation. The panels are best stored at room temperature. Avoid exposure to direct sunlight, extreme temperatures and chemical vapours
2 OUTDOOR USAGE If using Invision sheets for outdoor applications we recommend the version with UV protection to prevent the yellowing of the PETG panel. In spite of UV protection changes in colour of organic inlays may occur. The edges of the panels have to be sealed so that no water or moisture can get into the inside of the sheets. USAGE IN WET OR HUMID SURROUNDINGS Certain inlays for Invision like organic materials, but also papers and fabrics can have the tendency to absorb moisture over time if submerged in water or exposed to high humidity if they are not adequately sealed. These types of Invision should not be immerged in water without first applying an approved edge sealing treatment. This is also applicable for the edges of holes drilled into Invision sheets. glow wire flammability index, IEC , in C (*) 0,5 0,75 1 1,5 2 2,5 3 4 Invision
3 TECHNICAL DATA test conditions typical unit test method PHYSICAL density 1,27 g/cm3 ISO moisture absorption after storage in standard climate 23 C/50%r. F. 0,2 % ISO 62-4 after storage in water at 23 C until saturation 0,6 % ISO 62-1 refractive index 20 C 1,567 - ISO 489 MECHANICAL tensile stress at yield 45 MPa ISO 527- elongation at yield 4 % ISO 527- tensile strength 45 MPa ISO 527- elongation at break 35 % ISO 527- elastic modulus MPa ISO 527-2/1B/1 limiting flexural stress ca. 80 MPa ISO 178 impact strength charpy unnotched ohne kj/m2 ISO 179/1fU THERMAL charpy notched ca. 7 kj/m2 ISO 179/1eA Izod notched ca. 6 kj/m2 ISO 180/1A Vicat softening temperature method B50 80 C ISO 306 thermal conductivity 0,2 W/m K DIN coeff. of linear thermal expansion 0,05 mm/m DIN A heat deflection termperature method A: 1,80 MPa 63 C ISO 75-2 under load method B: 0,45 MPa 70 C ISO 75-2 ELECTRICAL dialectric strength 16,1 kv/mm IEC volume resistivity 1015 Ohm c IEC surface resistivity 1016 Ohm IEC dialectric constant at 103 Hz 2,6 IEC at 106 Hz 2,4 IEC dissipation factor at 103 Hz 0,005 IEC at 106 Hz 0,02 IEC
4 Cleaning and Care Invision has a pore-free surface to which it is difficult for dirt to adhere. Dusty parts can be wiped with water, a soft cloth or a sponge but should never be rubbed when dry! For thorough cleaning, we recommend a non-abrasive detergent. Razor blades or other sharp tools, abrasive or strongly alkaline detergents, solvents, leaded benzene and carbon tetrachloride should not be used. The only way to achieve effective cleaning without streaks is to use a microfiber cloth that is simply dampened with water. In the case of a greater build-up of dirt or greasy stains in particular, benzenefree pure petroleum spirit (cleaner`s naphtha or light gasoline) may be applied. Splashes of dye, grease or residual sealing putting etc. may be removed using a soft cloth soaked in ethyl alcohol, isopropyl alcohol or petroleum ether (boiling point 65 C) and gentle rubbing prior to curing. Rust marks can be removed with a 10% solution of oxalic acid. ATTENTION! Do not use steam cleaners. Never expose Invision sheets to temperatures above 65 C. Invision sheets without UV protection should not be exposed to direct sunlight for an extended period of time. UV light can cause changes of the embedded materials. Do not expose Invision to splash water or standing water if the cutting edges and drill holes were not sealed. Inlays made of organic materials, paper or textiles tend to absorb water through the panels' open edges
5 Processing Instructions GENERAL REMARKS: - tools Invision sheets can be machined using the standard tools commonly used for metal and woodworking. We recommend carbide-tipped tools. Above all, it is important to use sharp cutting tools with the right geometry. - cooling No cooling is required during the normal machining of our Invision sheets. In the event of local overheating during machining e.g. when drilling through very thick materials we recommend cooling with water or oilfree compressed air. - dimensional accuracy The coefficient of linear expansion of Invision at mm/mk, is significantly higher than for metal or glass. For this reason, dimensions should always be checked at room temperature. - protective foils Our standard-protection foils are not suitable for exposure to thermal loads and do not allow thermoforming. The foil should therefore be removed from the sheets before processes such as drying, hot line bending and/or thermoforming. - marking Marking out drill holes, cut edges etc. should be done on the protective foil. If marking is required, use a soft pencil or felt-tip pen. Marking tools should not be used as the tracing mark has a notching effect, and a higher load at this point may cause the sheet to crack
6 Bonding: In principle gluing must be performed with great care, and the choise of a suitable adhesive is of highest importance for a perfect result. Successfully we tested the following products, you can purchase them at specialiced dealers in a short time. We point out that gluings must be accomplished directly on PETG. We do not recommend an application of the adhesive on mounted foils, varnish, digital print, silkscreen print, or the like. Brand/ trade name description of the producer preferred materials Designpanel test results technical details technicoll 9110 special, transparent contact adhesive for area gluing of plastic materials, which cannot be easily glued; technicoll 9110 has a good resistance against moisture and aging, a very high initial bond and a long contact bonding time. PE (HDPE, LDPE), PP, POM (Polyoxymethylen) PA, PA 6,6, PET, PETG, PVC-hard, PMMA, ABS, PS, Polyester, GFK, CFK, metals blanc or coated, woodbased materials, leather, textile, fabric, rubber, glass and more. good for large-area gluing, (min. 100 x100 mm) tested in sandwich method, PETG on PETG. contact glue (that means the material/parts are not glued together by solvation of the surfaces.) basis: synthetic elastomeres viscosity: ca. 225 mpas contact glue time: < 50 minutes colour: transparent technicoll 9413 suitable for glueing without primer - for different substrats - as composite materials, many thermoplasts, duromeres, metals and coated surfaces. metals, concrete, concrete stone, nature stone, thermoplasts: PMMA, ABS, PA, PS; PVC "hard", PUR, PET, PETG, PC, wood-based materials, duromer materials (GFK, CFK, SMC) ceramics, epoxy resins, polyester very good for bonding of mitre joints, et cetera. easy to process by dispensing gun. also for small sandwich gluing. Negative Short time of processing, because of rapid hardening, and the yellowish colour of the glue. basis: acrylat stable consistence color: yellow drop time": 15 minutes - 6 -
7 product description of the producer preferred materials Designpanel test results technical details LUGATO bombenfest universal glue and sealing material, first quality. new technology: Polyurethan-Hybridsystem: High initial bond and fast hardening. Permanently elastic, wheatherproof, can be painted. no odour nuisance during processing; strongly adhesive on all mineral surfaces, wood, plastic materials, metals. Resistent to seawater and aqueous cleaners. coatings, concrete, epoxy resins, tiles, gypsum fibre, glass, wood, masonry, cementlime plasters metal (for example, anodised/varnished aluminium, lead, copper, brass, steel, zinc plastic materials (like melamine resin, PETG, polyester, polyamide, polystyrene, polypropylene, PVC) for example for bonding PETG on MDF sheets stick well together also for sealing of PETG panels (Invision) in sanitary areas; Negative only available in two colours: grey and white two colors: grey, white Warning: do not use usual silicone after a while the sheets will separate again
8 SAWING - hand saws Standard hand saws may be used to cut sheets. A saw with fine spacing between the teeth should be used. - circular saw Using a circular saw is the easiest way to cut Invision sheets. Experience has shown that carbidetipped circular saw blades produce the cleanest cuts. The spacing varies from fine for thin sheets to coarse for thicker materials. Ensure that no shavings are left on the cutting surface as these could damage the protective foil and scratch the sheets. - ribbon saw Ribbon saws are ideal for curved cutting or formed parts of irregular shapes. To achieve a clean cut edge it is important to work on a solid cutting surface. A wide spacing is required when working with thick materials. For higher quality cut edges, circular saws or milling cutters achieve a better result than ribbon saws. - trouble-shooting: fused cut edge: check tool sharpness check cutting speed and reduce if necessary check rate of advance and reduce if necessary cool if necessary notched cut edge: check tool sharpness check tool geometry improve cutting surface (use an underlay if necessary) - 8 -
9 DRILLING Standard drills used for metalworking are perfectly suitable for machining Invision sheets. Make sure that the cutters on the drill are sharp. Cooling during drilling is generally not necessary. When working with relatively large drilling depths we recommend using compressed air and/or regularly withdrawing the drill from the hole to reduce heat and remove shavings. Oil/water emulsions or cutting oils should not be used when drilling through Invision sheets. Standard circle-cutting equipment (e.g. circle cutters or compass saws) is suitable for large-scale drilling. The drill holes should be smooth and as free as possible of notches or rough areas to ensure secure fastening. recommended angles for drilling: point angleϕ Helix angle β cutting speed feed m/min. 0,1-0,3 mm/u The distance between whole and sheet edge should be at least 1.5 times of the diameter of the whole. MILLING Invision sheets are easy to process using milling machines. The choice of milling machine depends on the type of machining required. Some of the Invision sheets with special inlays e.g. metal structures can only be cut by water jet. Please ensure that your tool has good chip clearance and sharp cutters
10 SURFACE TREATMENT - flame polishing Propane, butane or other types of gas burner may be used for flame polishing. This technique can produce excellent results but requires experience and ongoing practice. Make sure that the material does not crystallize. Cracks may appear in the polished area in the long term. - polishing Medium-density riding polishing wheels with a peripheral velocity of 20 to 30 m/s can be used to polish Invision sheets with alkali-free polishing pastes. A clean polishing wheel without polishing paste in then used to complete the polishing process. Large-surface polishing should be avoided. - decorating Before treating polish Invision sheets e.g. by coating, screen printing or thermoforming recommend removing any loose particles of dirt or dust adhering to the surface using ionized air. The matt side of Invision sheets is not suitable for printing. - transfer printing Sheets and finished parts can be printed using transfer printing. - screen printing Invision sheets may be printed with standard screen printing equipment and inks suitable for thermoplastic polyesters (PET). The ink manufacturer`s recommendations should be followed. Invision sheets can be printed with UV-curved inks. The short-term UV radiation has not impact on the physical properties. The maximum application temperature of 65 C should not be exceeded during the drying process. - coating Once cleaned, Invision sheets may be coated without any other pre-treatment. Care should be taken to ensure that the coatings and printing inks are chemically compatible with Invision
11 FORMING - thermoforming Attention: not all inlays for Invision can be thermoformed! Protective foil: Our standard protective foils are not suitable for exposure to thermal loads, and do not allow thermoforming. The foil should be removed from the sheets before processes such as drying, hot line bending and/or thermoforming. - pre-drying Invision sheets do not have to be pre-dried. - hot line bending Hot folding is a relatively easy forming process for the production of uniaxially formed parts. Invision sheets simply require local heating to approximately 100 C. The Invision sheets are heated in a linear manner. As soon as the ideal temperature is reached, the sheet is removed from the heating element, folded, placed in the mold and clamped into position. The desired shape should be fixed until the material rigidifies. If using one-sided heating, the Invision sheets must be turned over several times to guarantee even heating on both sides. With sheet thicknesses of 2 mm or more and when producing large numbers of units, we recommend simultaneous heating appliance. By adjusting the heating width using the shields, various different bending radii can be achieved, although a minimum bending radius of 3 times the sheet thickness should not be undershot. When constructing forming molds, allowance should be made for shrinkage of 0.4%. Special materials are available for producing porous forming tools without vents. - male and female tools: The decision on whether to use a male or female tool depends on the application. To achieve a better surface quality on the outer side of the finished part, use of a female tool is recommended to attain greater detail
12 - free blowing or free drawing This technique is used to form domes. Blowing without a countermold involves working with air pressure, whilst the thermoforming process without a countermold is carried out in a vacuum. molding temperature Invision: C For questions, please contact: Designpanel GmbH Dagobertstraße Nürnberg Germany Phone: info@designpanel.de
Invision. PHYSICAL density 1,27 g/cm3 ISO C/50%r. F. after storage in water at 23 C until saturation
data sheet Invision raw material: VIVAK of Bayer Sheet Europe technical data according to supplier test conditions typical values unit test method PHYSICAL density 1,27 g/cm3 ISO 1183-1 moisture absorption
More informationMakrolon Solid Polycarbonate Sheets
1. General remarks Tools sheets can be machined using the standard tools commonly used for metal and woodworking. We recommend carbide-tipped tools. Above all, it is important to use sharp cutting tools
More informationVIEWpanel Technical Manual
VIEWpanel Technical Manual VIEWpanel is a prefabricated panel comprising 0.21 aluminium skin (1100 alloy) both sides, apart from our lite grade, which is 0.12 aluminium skin both sides and a polyethylene
More informationMasking: Each mirrored sheet is well protected by a durable paint backing and
STORAGE Horizontal storage: If mirror sheets are stored flat, care must be taken to avoid warping, slipping and scratching. If different sizes are stored together the largest panels should at the bottom
More informationFlexicryl Splashback Installation Guide Easy DIY Add a Pop of Colour!
Flexicryl Splashback Installation Guide Easy DIY Add a Pop of Colour! Product Information - 4mm High Gloss Flexicryl Splashback Panels - Hard-co-extruded surface for hygienic clean sustaining daily use
More informationProcessing and design Solid Textile Board
Processing and design Solid Textile Board List of contents Introduction Kerfing Joints and assembly Increasing thickness and stiffness Edges Cutting Milling and drilling Three-dimensional pressing Surface
More informationTRANSFORMER MANUAL. Bérkel Acrylic Mirror
TRANSFORMER MANUAL Bérkel Acrylic Mirror TRANSFORMER MANUAL BÉRKEL ACRYLIC MIRROR Light and resistant, Bérkel Acrylic Mirrors were developed to a wide rande of application substituting glass mirrors, especially
More informationPolyCarb has good resistance to many chemicals. Some chemicals may harm the PolyCarb sheets. Contact us when in doubt about any chemical.
Polycarbonate Panels This manual provides the basic information for working with and installing PolyCarb sheets. Due to their hollow core, prior preparation is needed before the actual installation, with
More informationSeptember 10, 2009 Page 1 PRODUCT DESCRIPTION PRODUCT FEATURES
September 10, 2009 Page 1 PRODUCT FEATURES BASIC USES/RELATED USES Interior decorative tile. Architectural tile for decorative wall surfaces, backsplashes and other applications. Custom architectural and
More informationEASY APPLICATION. Furniture Linoleum
EASY APPLICATION Furniture Linoleum can be applied easily on all common materials such as MDF, chipboard and Plywood as well as steel or composite materials. Furniture Linoleum has a special matte appearance
More informationRoll Out Vinyl Installation Guide
Sub-floor Requirements The contractor performing the installation of the performance vinyl flooring must ensure the proper quality of the sub-floor. The sub-floor must be clean, smooth, permanently dry,
More informationInstallation Guide. Pionite Decorative Surfaces One Pionite Road, Auburn, Maine PIONITE ( )
Installation Guide A Subsidiary of Panolam Surface Systems SMPBRO00-012 6/14 Pionite decorative laminates are designed for finished interior surfaces which require high impact, wear and stain resistance
More informationExtruded sheet (FF) #3 Other Methods of Cutting. Technical information. This brief gives advice for:
Technical information Extruded sheet (FF) WARNING: This product can expose you to chemicals including Ethyl acrylate, CAS 140-88-5, which are known to the State of California to cause cancer. For more
More informationGuidelines for working with
Guidelines for working with 1. Sawing Circular Saws When using circular saws, only the circular saw blades that are not set are suitable for cutting PARAPAN. Hardened metal saw blades that have the greatest
More informationGluing windows with SABA Glasstack 760
Info sheet 208 Gluing windows with SABA Glasstack 760 Version 2008-05-08 EN, replaces all prior versions Page 2 of 9 Info sheet 208 Gluing windows with SABA Glasstack 760, version 2008-05-08 EN 1. Introduction
More informationLaying and maintenance of cement tiles
Laying and maintenance of cement tiles David&Goliath cement tiles are manufactured under licence in the Far East, according to our standards and specifications concerning colour and dimensional stability;
More informationTECHNICAL INFORMATION POLYCASA HIPS
Contents Contents... 1 1. PRODUCT IDENTIFICATION... 1 2. CHARACTERISTICS... 1 3. APPLICATIONS... 1 4. FABRICATION AND FINISHING TECHNIQUES... 1 5. STATEMENTS... 2 5.1. Food approval statement... 2 5.2.
More informationQUARTZ FABRICATION MANUAL
QUARTZ FABRICATION MANUAL Quartz Fabrication Manual Rev. 1 Page 1 of 26 TABLE OF CONTENTS Product Description. 3 Slab Inspection.. 4 Fabrication Equipment.. 6 FABRICATION TIPS Cutting The Slab. 7 General
More informationSketchpaint. Ideal for turning any smooth surface into a whiteboard. Ready to use in 5 days
Sketchpaint Ideal for turning any smooth surface into a whiteboard SketchPaint - A whiteboard straight out of a tin! White Gloss or Transparent Finish Simple application Tin size available: 3m² or 6m²
More informationKEITH PANEL SYSTEMS FUNDERMAX- MAX EXTERIOR EXPOSED FASTENER PRESSURE EQUALIZED WALL SYSTEM
S Y S T E M D E T A I L S FUNDERMAX- MAX EXTERIOR EXPOSED FASTENER PRESSURE EQUALIZED WALL SYSTEM PAGE TITLE PAGE Table of Contents Fundermax Max Exterior Product Information Design and Installation Information
More informationOptima 450 LED Edge-Lit Single-Sided Light Box. Installation Instructions INSTALLATION INSTRUCTIONS. Figure 1. Tools you ll need
Installation Instructions Optima 450 LED Edge-Lit Single-Sided Light Box Figure 1 INSTALLATION INSTRUCTIONS Before you begin These instructions illustrate the Stylmark Optima 450 LED Edge-Lit Single-Sided
More informationProduct sheet 17/18. Solid Textile Board Acoustic Textile Felt
Product sheet 17/18 Solid Textile Board Acoustic Textile Felt About Really Responding to the urgent global issue of waste, Really upcycles textiles to create materials that challenge the design and architecture
More informationInstallation Instructions
www.marlite.com Effective Date 03/01/2018 ARTIZAN FRP, SYMMETRIX FRP, ENVUE FRP, STANDARD FRP Installation Instructions Statements expressed in this technical bulletin are recommendations for the application
More informationSplashback Installation Instructions
Splashback Installation Instructions What is Akril? Akril is an Australian made environmentally friendly, highly engineered polymer, enhanced with colour. Quite simply, it offers a new source of design
More informationGRIP & GRAB ADHESIVE
GRIP & GRAB ADHESIVE GRIP AND GRAB ADHESIVE GRIP AND GRAB ADHESIVE Siroflex Grip and Grab is excellent. We had allowed one and a half days to install - by using Siroflex we cut the install time down to
More informationInstallation Instructions
Aspex Digitally Printed Wall Art PL PREMIUM HEAVY DUTY ADHESIVE ASPEX WALL ART DOUBLE SIDED FOAM TAPE Installation of Aspex Digitally Printed Wall Art with Foam Tape and PL Premium Adhesive. Maximum size
More informationRev. 05/16 01 ACRYLIC INSTALLATION GUIDE
Rev. 05/16 01 ACRYLIC INSTALLATION GUIDE Contents 1.0 Inspection 3 2.0 Storage 3 3.0 Handling 3 4.0 Planning & Preparation 3 5.0 Panels 4 6.0 Accessories 4 7.0 Tools & Fixings 4 8.0 Fitting Tips 5 9.0
More informationMagnetpaint & Sketchpaint
Magnetpaint & Sketchpaint Turn any smooth surface into a magnetically receptive whiteboard MagnetPaint is an exciting product that allows you to paint your own magnetic surface on any flat area. SketchPaint
More information31593IN-N /16 (98.2cm) 14 3/16 (36cm)
INSTALLATION INSTRUCTIONS ESCALE VANITY 1000MM 31593IN-N21 ROUGH-IN DIMENSIONS 13 1/2 (34.3cm) 38 11/16 (98.2cm) 14 3/16 (36cm) All dimesnions are in Inch(cm). Fixture dimensions are nominal and conform
More information20270IN-* 800MM KOHLER WHITE. 19 5/16"(49 cm) C 20 1/16 (51) 28 1/8 (71.4) 35 13/16 (91) 11 13/16"(30 cm)
INSTALLATION INSTRUCTIONS TERRACE TM VANITY 600MM, 800MM & 1000MM 20332IN-* 600MM KOHLER WHITE 20270IN-* 800MM KOHLER WHITE 20274IN-* 1000MM KOHLER WHITE ROUGH-IN DIMENSIONS Furniture Length Size 19 5/16"(49
More informationMarabu. Mara Star SR. Field of Application. Characteristics
Screen Printing Ink for PVC self-adhesive foil, rigid PVC, ABS, SAN, acrylic, polycarbonate, pre-treated polyester foils, thermosetting plastics, coated substrates High gloss, high opacity, very fast drying,
More informationCOSMO Adhesives. Window and door construction 01/18. made by Weiss
COSMO Adhesives Window and door construction 01/18 made by Weiss Corporate Group Weiss The adhesive specialist for window and door construction For all window frame materials of plastics, aluminium, wood
More informationPOWER VLIES STRETCH 160
Product Information Manufacturer: Architects Paper A brand of A.S. Création Tapeten AG Südstr. 47 51645 Gummersbach www.architects-paper.com Product Name POWER VLIES STRETCH 160 Quick Start Guide - The
More informationFurniture Adhesives.
Furniture Adhesives www.romaplastik.com Roma Plant, Gebze/Turkey ROMA HISTORY AND ROMA TODAY Founded in 1996, Roma Plastik is the world s 3 rd largest edging manufacturer and the market leader in Turkey,
More informationDigital Magnetics Support document
Digital Magnetics Support document Digital Magnetics Change your graphics quickly. 01 / 02 Introduction DM 03 / 04 Support Ferro & Magnetic Base About DM 05 / 06 Support Flexible Ferrous films Digital
More informationKEITH PANEL SYSTEMS FUNDERMAX- MAX EXTERIOR CONCEALED FASTENERS PRESSURE EQUALIZED WALL SYSTEM
S Y S T E M D E T A I L S FUNDERMAX- MAX EXTERIOR CONCEALED FASTENERS PRESSURE EQUALIZED WALL SYSTEM PAGE TITLE PAGE Table of Contents Fundermax Max Exterior Product Information Design and Installation
More informationCold curing adhesive K-X280
Instructions for use English Cold curing adhesive K-X280 A4048-1.0 en English 1 Safety instructions... 3 2 General information... 3 2.1 Scope of delivery for K-X280... 3 2.2 Accessories required for installation...
More informationPINE WOODS OAK METALS POLYMERS ASH SOFTWOODS CHIPBOARD MAHOGANY MAN MADE HARDWOOD WOODS MDF PLYWOOD BEECH HARDBOARD THERMOSET FERROUS METALS CARBON
ASH PINE MAHOGANY SOFTWOODS CHIPBOARD HARDWOOD MAN MADE WOODS OAK WOODS MDF PLYWOOD BEECH HARDBOARD RESISTANT METALS MATERIALS ALUMINIUM POLYMERS NON-FERROUS METALS UREA FORMALDEHYDE COPPER ZINC THERMOSET
More informationInformation Guide for Tools and Fabrication Techniques
Information Guide for Tools and Fabrication Techniques Our Innovation. Your Imagination. Table of Contents General Tooling Information.... 4-5 Standard woodworking tools.. 4 Pocket screw.. 4 Heat guns
More informationINSTALLATION MANUAL STORAGE
IMVersion 1.1 INSTALLATION MANUAL GENERAL GUIDE: The information in this IM is intended to serve as a general guide to proper installation with no warranties intended or implied. Prime Panels assumes no
More informationDesign and Technology Resistant materials Key words and definitions
Design and Technology Resistant materials Key words and definitions Word Acrylic Definition a type of thermoplastic, which is hard and can be transparent. Used to make shop signs. Perspex is a trade/brand
More informationACRYLITE Optical. mar resistant acrylic sheet. Technical information. gouging with sharp tipped objects, such as knives or screwdrivers.
Technical information ACRYLITE Optical mar resistant acrylic sheet Product Description ACRYLITE Optical (MR) sheet is a continuously manufactured acrylic sheet that has excellent abrasion and chemical
More informationInstalling 3M DI-NOC Architectural Finishes on Doors
Installation Guide Revision C, September 2017 Introduction The purpose of this installation guide is to establish a 3M-recommended procedure for installing 3M DI-NOC Architectural Finishes (the Product
More informationWHAT S ON THE MARKET?
Smart Shopping for Home Furnishings Selecting Paint Dr. Leona Hawks Home Furnishings & Housing Specialist 1987 HI 13 Shopping for paint? When shopping for paint, you will find many different kinds. Some
More informationINSTALLATION INSTRUCTIONS. GetaCore Kitchen Worktops
INSTALLATION INSTRUCTIONS GetaCore Kitchen Worktops INSTALLATION INSTRUCTIONS GetaCore Kitchen Worktops SAWING MILLING Before being cut, the solid surface material parts to be joined should be checked
More informationMirroFlex Technical Sheet
ATI- Information Revision 1 Effective Date: 8/1/08 MirroFlex Technical Sheet What is MirroFlex? MirroFlex is a decorated thermoplastic available in sheet and roll form. The decorative surface is fused
More informationINSTALLATION INSTRUCTIONS FOR QUICK-STEP LAMINATE WITH HYDROSEAL TECHNOLOGY.
. PREPARATION. INSTALLATION. FINISHING. MAINTENANCE INSTALLATION INSTRUCTIONS FOR QUICK-STEP LAMINATE WITH HYDROSEAL TECHNOLOGY. IN ORDER TO OBTAIN A GOOD RESULT, WE ADVISE TO FOLLOW ALL GIVEN INSTRUCTIONS
More informationStoring, Handling, and Cleaning dekō Markerboards Storing Markerboards. Handling. Cleaning
Storing, Handling, and Cleaning dekō Markerboards Storing Markerboards dekō markerboards must be stored inside, and stacked horizontally to avoid bowing. Do not store or transport dekō markerboards outdoors
More informationLUXAR Anti reflective coated glass Handling Procedures for LUXAR
LUXAR Anti reflective coated glass Handling Procedures for LUXAR - 1-29.03.99 Table of contents 0. Introduction of LUXAR 1. Transportation / Packing 2. Storage 3. Handling / Cutting 4. Treatment 5. Washing
More information3M Scotchgard Surface Protection Film 2200
Effective July 2016 Commercial Solutions Division 3M Scotchgard Surface Protection Film 2200 Product Bulletin / Instruction Bulletin Product Description 3M Scotchgard Surface Protection Film 2200 is a
More informationRevision 1 TECHNICAL SHEET
TECHNICAL SHEET What is FlexLam? FlexLam is a decorated thermoplastic available in sheet and roll form. The decorative surface is fused to its substrate utilizing several proprietary techniques that create
More informationmiramondo Technical Informations 1/10 Hop Hop
1/10 Hop Hop Technical Informations Hop Hop 2/10 Dimensions 1300 Hop Hop 3/10 Dimensions 615 650 1300 1950 800 635 460 615 650 1300 1950 800 460 615 650 1300 1950 800 635 460 615 650 1300 1950 800 460
More informationDAYLIGHT HARVESTING MULTIWALL. Applications:
DAYLIGHT HARVESTING MULTIWALL Applications: ROOFING FAÇADE INTERIOR OUTDOOR PRODUCT RANGE Tuflite Hollow & Cellular Polycarbonate Sheets: Twin Wall Triple Wall Four Wall Tuflite Multiwall Polycarbonate
More informationSHIPLOCK CLADDING PRODUCT GUIDE INSTALLATION TECHNICAL SPECIFICATIONS CARE & MAINTENANCE
SHIPLOCK CLADDING PRODUCT GUIDE INSTALLATION TECHNICAL SPECIFICATIONS CARE & MAINTENANCE SHIPLOCK CLADDING CN-04E / CN-04W / CN-W008 Prior to the installation of any form of Cladding, it is recommended
More informationSHIELDED WINDOWS. General Description. Orientation. Shielding Test Data. Tolerances. 32 BOMBERG & CO. ApS Tlf Fax
Attenuation (db) SHIELDED WINDOWS General Description Shielded windows consist of one or more window layers with a conductive intermediate layer. Applicable for all visual display systems, e.g. in meters
More informationLABEL STICKER PRODUCT SPECIFICATION
Page / 9 Selected Size (mm) Delivery Sheet Size Paper Material Print Side & Print Colour Compulsory Finishing Optional Quantity (pcs) Process Days (excluding order day & receive day) Rectangle / Square
More informationFir and pine wood (52 %) Portland cement (38 %) made by firing limestone and clay Water (9 %) Wood mineralisation substances (1 %)
Duripanel Structura Product information sheet 1 1 Product composition Duripanel Structura fibre panels are made from: Fir and pine wood (52 %) Portland cement (38 %) made by firing limestone and clay Water
More informationMarabu. Tampacure TPC. Field of application. UV-curable, high gloss, good opacity, 1- or 2-component ink system, resistant to chemicals
Pad printing ink for ABS, rigid PVC, some PC, PS, and PMMA materials, pretreated PE and PP, as well as some metals, and varnished surfaces UV-curable, high gloss, good opacity, 1- or 2-component ink system,
More informationPainting & Renovation. Tape you can trust PPM PAINTING & RENOVATION
Painting & Renovation Tape you can trust 1 2 Each of our painter s tapes is designed to meet the requirements of a specific user group and market segment. The range covers demands from professionals to
More informationTechnical Documentation
Technical Documentation Edition 02/2016 Create New Worlds Shape, color, material - they all convey emotions, tell stories, inspire new ideas. And they all give our buildings and homes character. With this
More informationmiramondo Technical Informations 1/6 Il Posto L
1/6 Il Posto L Technical Informations public design GmbH - Miramondostr. 6-2504 Sooss - Austria - office@.com - www..com Il Posto L 2/6 Dimensions 654 165 654 Convex Dimensions 654 165 440 625 public design
More informationINSTALLATION INSTRUCTIONS FOR ELKALAMINATE. IN ORDER TO OBTAIN A GOOD RESULT, WE ADVISE TO FOLLOW ALL GIVEN INSTRUCTIONS CAREFULLY.
INSTALLATION INSTRUCTIONS FOR ELKALAMINATE. IN ORDER TO OBTAIN A GOOD RESULT, WE ADVISE TO FOLLOW ALL GIVEN INSTRUCTIONS CAREFULLY. PREPARATION Let the planks acclimatize for 48 hours in the unopened packaging
More informationArla WOODEN CARE GUIDE BY DIRECT OUTDOOR LIVING
Arla WOODEN GUIDE BY DIRECT OUTDOOR LIVING This care guide will guide you on how to get the best from your Direct Outdoor Living garden furniture. Acacia Care The Acacia used in our products is highly
More informationThe Passive Fire Protection Handbook
Uniclass L5:P:N3 CI/SfB Rf9 EPIC E:X:Y41 (K)+(K3) December 003 NBSPlus The Passive Fire Protection Handbook SUPALUX SUPALUX Applications Timber and steel frame partitions Single skin solid wall Fire protection
More informationHandrail H Series. Product Installation. Instructions. Installation Instructions For. Wall Mounted and Freestanding Round Handrails
Product Installation Installation Instructions For Instructions Handrail H Series Installation Instructions for Wall Mounted and Freestanding Round Handrails Step Nosing F Series Concrete and Timber Step
More informationWorking with Wood and Wood Materials
Working with Wood and Wood Materials Excerpt from the Bosch Encyclopedia of Power Tools. Written & Published by ROBERT BOSCH GmbH and Robert Bosch Tool Corporation. The grain direction of the fibers determines
More informationBESSEY Training BESSEY Tools North America Alvin Products: Lab Metal, Lab Solvent
BESSEY Training BESSEY Tools North America Alvin Products: Lab Metal, Lab Solvent Page 1-1 Lab Metal A ready to use, aluminum filled metal repair, filler and patching compound. Easy to use Ready to use
More informationA strong clear liquid that bonds most materials in seconds. A quality product for the DIY enthusiast Great for emergency repairs.
Superglue Super Glue 3G - 3 s A strong clear liquid that bonds most materials in seconds. A quality product for the DIY enthusiast Great for emergency repairs. Super Glue 3G - Single A strong clear liquid
More informationDULUX UNIVERSAL UNDERCOAT
TECHNICAL DATA SHEET Version 1 2015 JUNE THIS ISSUE SUPERSEDES ALL PREVIOUS PUBLICATIONS PRODUCT DESCRIPTION Intermediate coating for use under decorative topcoats, for interior and exterior use PRODUCT
More informationThe Passive Fire Protection Handbook
Uniclass L5:P:N3 CI/SfB Rf9 EPIC E:X:Y41 (K)+(K3) December 003 NBSPlus The Passive Fire Protection Handbook VICUCLAD VICUCLAD Applications Fire protection of metal ducts Construction of smoke extract ducts
More informationHOTFIX STONES APPLICATION
HOTFIX STONES APPLICATION APPLICATION MANUAL PRECIOSA CRYSTAL COMPONENTS 2 PRECIOSA CRYSTAL COMPONENTS APPLICATION MANUAL Basic principles of the Hotfix technology Hotfix stones have a glue layer on their
More informationThe matte surface is created and protected with acrylic varnishes, the high gloss surface is proteced by pressing with melamine.
veneer Product Description The product name veneer is applied to decorative high-pressure laminates (HPL) with a face made from genuine wood veneers. veneer is composed from one type of wood or available
More informationLG BENIF characteristics
LG BENIF characteristics Over 500 Patterns Interior Applications Class A Fire Rated (UL-723) as well as being rated for Fire Door Applications Repairable Stain & Solvent Resistant Minimal Down Time Flexible
More informationMOUNT GRAPHICS GRAPHICS GRAPHICS PRINT MOUNT MOUNT MOUNT GUARD PRINT PRINT PRINT GUARD GUARD GUARD
GRAPHICS GRAPHICS GRAPHICS Premium quality is our standard 2 Handling instructions 3 ATP offers a wide product range of self-adhesive digital printing materials for many different applications as well
More information1. Initial Precautions 2. Technical Precautions and Suggestions 3. General Information and Cure Stages 4. Understanding and Controlling Cure Time
How to apply Arctic Silver Premium Thermal Adhesive 1. Initial Precautions 2. Technical Precautions and Suggestions 3. General Information and Cure Stages 4. Understanding and Controlling Cure Time 5.
More informationLAMINEX manages to introduce PETG SPECTAR in to domestic and foreign markets, and has become the only extruder in Mexico.
PetG SPECTAR LAMINEX manages to introduce PETG SPECTAR in to domestic and foreign markets, and has become the only extruder in Mexico. Eastman is a global specialty chemical company that produces a broad
More informationGlues and mastics. SILICONE ADHESIVE SEALANT 42 Marine silicone SOROMAP...42 Silicone colour RAL...42 Glue mastic MS1000 TECHNIFIX...
Glues and mastics In this chapter, we present all the products that you need to make sticking, seals, insulation and teak deck. SILICONE ADHESIVE SEALANT 42 Marine silicone SOROMAP......................................42
More informationLABEL STICKER PRODUCT SPECIFICATION
LABEL STICKER Page / 0 Selected Size (mm) Delivery Sheet Size Paper Material Print Side & Print Colour Compulsory Finishing Optional Quantity (pcs) Process Days (excluding order day & receive day) Rectangle
More informationmiramondo Technical Informations 1/7 La Strada
1/7 La Strada Technical Informations public design GmbH - Hanuschgasse 1 Objekt 31-2540 Bad Vöslau - Austria - office@.com - www..com La Strada 2/7 Dimensions 563 650 1300 1950 830 610 563 650 1300 1950
More informationNOTE: This product can be used externally if UV Guard is added (BY REQUEST ONLY).
Product Description PHOENIX PAINTS MAXICOAT 100 is a 2 Pack Water-Dispersed Top Coat which not only exhibits the physical and chemical strengths of epoxy, but also the safety and convenience of water as
More informationDURACRYL WALL INDEX INTRODUCTION. TOOLS AND MATERIALS REQUIRED. FLAT SHOWER WALL SIDE CONTOUR SHOWER WALL CORNER CONTOUR SHOWER WALL FLAT BATH WALL
DURACRYL WALL FLAT SHOWER WALL SIDE CONTOUR SHOWER WALL CORNER CONTOUR SHOWER WALL FLAT BATH WALL INSTALLATION GUIDE INDEX PAGES Introduction 1 Tools and materials 1-2 Construction requirements - timber
More informationM A N U A L 6 June 2017
M A N U A L 6 June 2017 What are Protection Films? These films are meant to protect the vulnerable parts of cars, bicycles, motorbikes, etc... They are transparent glossy, so the underlying colour remains
More informationSLIDING SYSTEMS. Product catalog 2017
SLIDING SYSTEMS Product catalog 2017 Grafipro Oy Product catalog 2017 Table of contents: 3 Areas of use 4 C rails C-30 is a company specialising in aluminium and plastic composite materials. Our expertise
More informationFinishes and Finishing Techniques
Finishes and Finishing Techniques TED 126 Spring 2007 Review pages 147-150, 284-294 Finishes and finishing techniques The finishing process to choose depends partly on the type of wood and the appearance
More informationDöllken PVC Edgebands Processing Information. September 2016
Processing Information September 2016 Contents 1. The special features of Döllken PVC edgebands...3 2. PVC material characteristics...3 3. Application areas of Döllken PVC edgebands...3 4. Machine processing...3
More informationWITH HEAT - NATURALLY
WITH HEAT - NATURALLY Clock House, Station Approach, Shepperton, Middlesex TW17 8AN T +44 (0)1932 256590 F +44 (0)1932 229989 E info@mbmspeciality.co.uk W www.mbmspeciality.co.uk Continue About the company
More informationCaravan Materials. Engineered to Perform Better
Caravan Materials Engineered to Perform Better ORAFOL Europe GmbH ORAFOL s Worldwide Locations Headquarters Oranienburg, Germany 2 Engineered to Perform Better - www.orafol.com Index Caravan Materials
More information6043 DESIGN AND TECHNOLOGY
www.onlineexamhelp.com www.onlineexamhelp.com CAMBRIDGE INTERNATIONAL EXAMINATIONS GCE Ordinary Level MARK SCHEME for the October/November 2013 series 6043 DESIGN AND TECHNOLOGY 6043/01 Paper 1, maximum
More informationMarabu. Marastar SR. Field of Application. Characteristics
Screen Printing Ink for PVC self-adhesive foil, rigid PVC, ABS, SAN, acrylic, polycarbonate, pre-treated polyester foils, thermosetting plastics, coated substrates High gloss, high opacity, very fast drying,
More informationSIMPLY DIFFERENT! VISCOM SIGN the lightweight foam board
SIMPLY DIFFERENT! VISCOM SIGN the lightweight foam board VISCOM SIGN EASYPRINT SIMPLY DIFFERENT! This pure white surface skin combined with our high-performance Stadurlon material offers a combination
More informationSalter Industries Spiral Stair
Salter Industries Spiral Stair The Leader in Spiral Staircases Continuous Sleeve Stair Installation Instructions TOOLS NEEDED: 1. Electric drill with hex chuck and Phillips bit 2. Drill bits 1/8", 1/4",
More informationCraftform. The tradesman s essential guide
Craftform The tradesman s essential guide Craftform The tradesman s essential guide The Craftwood panel with unlimited possibilities Trade Essentials Craftform is the Craftwood panel with unlimited possibilities
More informationsection 9 ADHESIVES & EDGING
section 9 ADHESIVES & EDGING PHOTO 9 ADHESIVES & EDGING Adhesives & fillers 158 Edging 165 Adhesives & fillers Mitre adhesive and activator Delivers a really strong joint in a matter of seconds Suitable
More informationBend Sensor Technology Mechanical Application Design Guide Mechanical Application Design Guide
Bend Sensor Technology Mechanical Application Design Guide Mechanical Application Design Guide www.flexpoint.com Copyright 2015 Flexpoint Sensor Systems Page 1 of 10 2 Bend Sensor Technology Mechanical
More informationINSTALLATION INSTRUCTIONS FOR QUICK-STEP LAMINATE.
. PREPARATION. INSTALLATION. FINISHING. MAINTENANCE INSTALLATION INSTRUCTIONS FOR QUICK-STEP LAMINATE. IN ORDER TO OBTAIN A GOOD RESULT, WE ADVISE TO FOLLOW ALL GIVEN INSTRUCTIONS CAREFULLY. - 0-% RH 8h
More informationmiramondo Technical Informations 1/6 Passepartout Concrete
1/6 Passepartout Concrete Technical Informations Passepartout Concrete 2/6 Dimensions 590 600 1785 590 600 1785 250 150 400 700 Hole pattern for mounting 590/1785 504/1699 43 590 324 133 D 12 Passepartout
More informationWET AREA PANELLING. Designer Walls. Fast
WET AREA PANELLING Designer Walls. Fast AU/a5 WallART Brochure_ART BUNNINGS.qxp_Layout 1 7/6/18 10:16 am Page 3 LINEAR SERIES WET AREA PANELLING Add a touch of class to your SHEET COLOURS home or workplace
More informationUltraBoard Classic Application Guide
1900 East Central Ave., Bentonville, AR 72712 p. 479-273-2924 f. 479-273-5186 e. info@ultraboard.com w. www.ultraboard.com UltraBoard Classic Application Guide Cutting Circular Saw UltraBoard Classic may
More informationNATURA PRO Product Information Leaflet 1
NATURA PRO Product Information Leaflet 1 1. Product composition NATURA PRO sheets consist of the following: Portland cement Mineral fillers Organic reinforcing fibers Additives Semi-transparent water-based
More informationHardware Fitting Accessories Door Seals
Areas of application Protection against cold, draught and vermin Reduces light leakage, sound insulation Smoke control, fire resistance Reduces the energy consumption of air conditioning systems (see following
More information