Fir and pine wood (52 %) Portland cement (38 %) made by firing limestone and clay Water (9 %) Wood mineralisation substances (1 %)

Size: px
Start display at page:

Download "Fir and pine wood (52 %) Portland cement (38 %) made by firing limestone and clay Water (9 %) Wood mineralisation substances (1 %)"

Transcription

1 Duripanel Structura Product information sheet 1 1 Product composition Duripanel Structura fibre panels are made from: Fir and pine wood (52 %) Portland cement (38 %) made by firing limestone and clay Water (9 %) Wood mineralisation substances (1 %) 2 Production method Dispersion process, three-layer wood-cement panels Duripanel Structura facade panels have multiple layers of acrylate with Fillite, TopCoat surface sealing, and hot-filming The surface coating are fully covering, with environmentally-friendly UV-resistant pigmentation is delivered with undercoat for on-site final coating 3 Dimensions and tolerances Duripanel Structura Thickness: 12 mm Length and width: 2600 x 1250 mm; 3100 x 1250 mm with cutting edge : 12, 16 and 18 mm 4 Weight (air-dried) Thickness Weight per m² Weight per panel 1250 x 2600 mm Duripanel Structura mm mm mm mm Weight per panel 1250 x 3100 mm 1 This information sheet replaces all earlier versions. ETERNIT reserves the right to alter this information sheet without priot notification. Please make sure that you are consulting the most recent version.

2 Colour 2 Ready-to-use Duripanel Structura Multi-layer, hot-film acrylate coating with environmentally friendly pigments. Grainy, silkmatt surface. Reverse side with transparent sealing. The surface coating covers fully, and environmentally-friendly, UV-resistant colour pigments are used. Red P 305, Red P 304, Orange P 701, Yellow P 602, Yellow P 601, Beige P 803, Blue P 404, Blue P 205, Green P 504, Grey 203, Grey P 205, White P 205, Blue P 405, Grey P 207, Black P 001 Undercoat Front is finished with grey undercoat for final surface coating on site as required. The final coating should be weather and alkali resistant, and should have the necessary adhesion to the sub-surface. An acrylate-based dispersion paint with colour-fast inorganic pigments can be used, such as Disbocret 515 Concrete Paint (Disbon GmbH), StoColor Royal (Sto AG), or Algae Protection Paint 4055 (Rickert GmbH&Co). Technical specifications Fire resistance (DIN 4102) : Class B1 (fire resistant) Density (test value) : approx g / cm³ Dead weight (Certified value) : 15 kn / m 3 Bending strength (test value) : 9.0 N / mm² Elasticity modulus (test value) : 4500 N / mm² Diffusion resistance (Duripanel Structura) (DIN 52615) 0-50 % rel. humidity : μ = % rel. humidity : μ = 60 Effect of heat exposure Thermal expansion : αt = mm / mkelvin (These values are based on Test Certificate 821/83. and data of Eternit AG ) Advantages When used in accordance with the application guidelines, wood-cement panels from Eternit AG have the following general characteristics: Duripanel Structura is made from natural materials and is recommended both for health and environmental considerations. Duripanel Structura facade panels are certified for use as back-ventilated cladding on wooden sub-structures up to the limit for high-rise constructions ( No. Z ) Duripanel Structura is as free from isocyanates and formaldehyde as natural wood. Resistant to moisture, frost and fungal attack - does not rot No chemical wood protective substances necessary Resistant to rodents and termites 2 See the most recent color chat for an illustration of the colours

3 (additional advantage for internal applications) Applications Large format facade panel on a wood sub-structure are certified for use as back-ventilated cladding, and can also be used as weather boarding on wooden support structures. Processing Data General: Duripanel Structura may be worked with the same tools as synthetic resin-bound chipboards. It can be sawn, drilled, milled, polished and planed. For economic reasons professionals should only use hard-tipped tools. Dust from working the panels contains no substances which might be health hazards. However, for reasons of work safety, dust extraction is important, and equipment should be rated to allow for the density of the dust. Fixings: The external wall cladding should be mounted with due care. Loads resulting from changes in shape should not cause damage at the connecting and fixing points. Best results are obtained with 6 mm drilled holes and Eternit Facade screws. The minimum spacing of the panel drilling is 25 or 80 mm. The wooden support structure must be protected in accordance with German standard DIN 68800, Parts 1, 2, 3 and 5. In order to avoid vertical wooden supports becoming water-logged, open joints near the wooden joists should have backing strips which do not allow the passage of water. Cutting: Hand sawing a hand saw with hardened teeth should be used Stationary sawing machines Duripanel Structura can be cut with vertical or horizontal sawing machines. - form cutters with moving tool - circular saws with contra-rotating, neutrally positioned tool Duripanel Structura panels can be cut both with contra-rotating and synchronous saw cutters (this means the feeding direction is identical with the rotating direction of the saw blade). Finishing centres with diamond-tipped tools for saw-cutting as well as planing represent a particularly economical solution. Electric circular hand saws with electronic speed control and dust collector. For the circular hand saws to produce clean cuts, they should be run along a support blade or gib. Positioning the saw on the rear side of the panel and the saw blade penetrating into it by not more than 5 mm will produce the cleanest chip-free cut, even with coated material, provided the other parameters such as saw blade, shape of saw-teeth and the cutting speed comply with instructions. Electric compass saws are particularly suited for curved cuts and adjusting work. We recommend compass saws with electronic controls, pendulum-lifting and dust-collector functions. Suitable saw blades have diamond-tipped saw-teeth, especially for long periods of operation. Cutting speed: The best cutting speed for Duripanel Structura is between 30 to 60 m/s. Drilling:

4 Any commercial electric hand drill can be used, preferably with electronic control and a good drill bit. Do not use the hammer drill function. Heavy-duty, hard-metal drill bits should be used for continuous operation. Health and safety considerations: Work on the panels produces dust which can irritate eyes and lungs. It is recommended that a dust mask and protective goggles are worn. When working in an enclosed space or using machines which produce large amounts of dust it is important that the dust is removed and that there is a supply of good air. Long-term exposure to the dust may result in health impairments. 10 Transport conditions The panels should be moved in stacks using a fork-lift truck or a crane. Individual panels should be moved vertically, and should not be set down on corners. Stacks should be transported under a waterproof cover. 11 Storage and handling Duripanel Structura should be stored and transported on a flat, dry surface which gives support over the entire area. Stack to a maximum height of 1.0 metre, preferably on the returnable palettes, or on dry wooden slats placed sufficiently close to avoid sagging. The panels should be covered, for example with a heavy-duty plastic sheeting, to protect against dampness, weather and dirt. The covering must remain in place at all times for stacked material. Individual panels should be stored on end with air circulation on both sides. If only one side of a panel dries out or becomes damp this can lead to warping. Store in a dry place protected from weather and on dry wooden slats. Sagging should be avoiding by including spacing slats in the stack where necessary. Panels should not be slid off the stack, but should be lifted. On site, the individual panels should be carried upright, and should not be set down on corners. Moisture: Stacked material should be covered with plastic sheeting or tarpaulin to protect against moisture and dust. The stack should remain covered at all times. Each panel should be lifted from the pile by two workers, removed without touching the other panels and then carried vertically. Duripanel Structura panels should always be carried upright. 12 Special comment Duripanel Structura with undercoat should be given the required final coating on site. 13 Commercial details Prices, delivery conditions, and delivery areas as specified by the supplier. 14 References A list of references can be requested from ETERNIT AG - Facade and Construction Sales - or accessed on the Website. 15 Specifications Detailed specifications can be requested from ETERNIT AG - Facade and Construction Sales - or accessed on the Website.

5 16 Availability Deliveries world-wide, ex works Availability from builder's merchants and construction companies, or directly from ETERNIT AG Germany Technical customer service our customer service department and the construction company in Germany Contractual and warranty conditions in accordance with VOB: 2 years on material ETERNIT AG Fassade und Ausbau Knesebeckstraße 59-61, D Berlin, Germany Tel * Fax fassade@eternit.de

NATURA PRO Product Information Leaflet 1

NATURA PRO Product Information Leaflet 1 NATURA PRO Product Information Leaflet 1 1. Product composition NATURA PRO sheets consist of the following: Portland cement Mineral fillers Organic reinforcing fibers Additives Semi-transparent water-based

More information

pacific build supply ltd

pacific build supply ltd Product Information ETERPAN is a medium density fibre cement sheet that is used for external cladding, plastered finish, base for stone and brick slips, rigid air barrier, weatherboards, soffits, louvres,

More information

March High performance building boards

March High performance building boards CI/SfB March 2009 (4-) Rf9 High performance building boards High performance building boards Contents 3 Product Selector 4-5 Bluclad 6-7 Hydropanel 8-9 Eterboard 10-11 Duripanel 12 Handling & Storage 2

More information

Installation Manual for Thermo Panel

Installation Manual for Thermo Panel Installation Manual for Thermo Panel 1 About Thermo Panel is a building wrap, insulation, air and water barrier, mold inhibitor and cold bridge eliminator all-in-one. Delivering an R-value of up to 5 on

More information

Installation Manual for M4-Exterior Sheathing

Installation Manual for M4-Exterior Sheathing Installation Manual for M4-Exterior Sheathing 1 Application Area - Testing M4 complying with: 2015 and 2012 International Building Code (IBC) and 2015 and 2012 International Residential Code (IRC). The

More information

KEITH PANEL SYSTEMS FUNDERMAX- MAX EXTERIOR EXPOSED FASTENER PRESSURE EQUALIZED WALL SYSTEM

KEITH PANEL SYSTEMS FUNDERMAX- MAX EXTERIOR EXPOSED FASTENER PRESSURE EQUALIZED WALL SYSTEM S Y S T E M D E T A I L S FUNDERMAX- MAX EXTERIOR EXPOSED FASTENER PRESSURE EQUALIZED WALL SYSTEM PAGE TITLE PAGE Table of Contents Fundermax Max Exterior Product Information Design and Installation Information

More information

Makrolon Solid Polycarbonate Sheets

Makrolon Solid Polycarbonate Sheets 1. General remarks Tools sheets can be machined using the standard tools commonly used for metal and woodworking. We recommend carbide-tipped tools. Above all, it is important to use sharp cutting tools

More information

-ARBOREAL. Skanfas Ltd Rikkilän/e 993 FIN Simola

-ARBOREAL. Skanfas Ltd Rikkilän/e 993 FIN Simola Skanfas Ltd Rikkilän/e 993 FIN-54330 Simola www.skanfas.com Installation Instructions Skanfas is a fire-proof, weather-proof and non-decaying facade material. It is a combination of the pleasant look of

More information

Installation instructions for co-extruded louver-board profiles

Installation instructions for co-extruded louver-board profiles Installation instructions for co-extruded louver-board profiles www.silvadec.com / info@silvadec.com / tel.:+33 (0)2.97.45.09.00 TO BE READ CAREFULLY BEFORE INSTALLATION Before starting installation on

More information

Installation Instructions

Installation Instructions Installation Instructions Öko Skin application as facade cladding Öko Skin concrete slats are installed as wall panels based on the principle of curtain-type, rear-ventilated facades. In order to ensure

More information

Cladding. Quick Installation Guide. HardiePlank Cladding with ColorPlus Technology. For façades that last longer. Simple. Reliable. Durable.

Cladding. Quick Installation Guide. HardiePlank Cladding with ColorPlus Technology. For façades that last longer. Simple. Reliable. Durable. Cladding Quick Installation Guide HardiePlank Cladding with ColorPlus Technology. For façades that last longer. Simple. Reliable. Durable. Installation instructions This document is a step by step guide

More information

SHIPLOCK CLADDING PRODUCT GUIDE INSTALLATION TECHNICAL SPECIFICATIONS CARE & MAINTENANCE

SHIPLOCK CLADDING PRODUCT GUIDE INSTALLATION TECHNICAL SPECIFICATIONS CARE & MAINTENANCE SHIPLOCK CLADDING PRODUCT GUIDE INSTALLATION TECHNICAL SPECIFICATIONS CARE & MAINTENANCE SHIPLOCK CLADDING CN-04E / CN-04W / CN-W008 Prior to the installation of any form of Cladding, it is recommended

More information

KEITH PANEL SYSTEMS FUNDERMAX- MAX EXTERIOR CONCEALED FASTENERS PRESSURE EQUALIZED WALL SYSTEM

KEITH PANEL SYSTEMS FUNDERMAX- MAX EXTERIOR CONCEALED FASTENERS PRESSURE EQUALIZED WALL SYSTEM S Y S T E M D E T A I L S FUNDERMAX- MAX EXTERIOR CONCEALED FASTENERS PRESSURE EQUALIZED WALL SYSTEM PAGE TITLE PAGE Table of Contents Fundermax Max Exterior Product Information Design and Installation

More information

Masking: Each mirrored sheet is well protected by a durable paint backing and

Masking: Each mirrored sheet is well protected by a durable paint backing and STORAGE Horizontal storage: If mirror sheets are stored flat, care must be taken to avoid warping, slipping and scratching. If different sizes are stored together the largest panels should at the bottom

More information

Installation Instructions: Urbanline Alu Selekta Clad

Installation Instructions: Urbanline Alu Selekta Clad Product description Ecology Technical data Urbanline Alu Selekta Clad (selekta façade profiles and heritageselekta façade profiles) are identical in terms of their core material and surface texture. However,

More information

Installation Guide. Pionite Decorative Surfaces One Pionite Road, Auburn, Maine PIONITE ( )

Installation Guide. Pionite Decorative Surfaces One Pionite Road, Auburn, Maine PIONITE ( ) Installation Guide A Subsidiary of Panolam Surface Systems SMPBRO00-012 6/14 Pionite decorative laminates are designed for finished interior surfaces which require high impact, wear and stain resistance

More information

The Passive Fire Protection Handbook

The Passive Fire Protection Handbook Uniclass L5:P:N3 CI/SfB Rf9 EPIC E:X:Y41 (K)+(K3) December 003 NBSPlus The Passive Fire Protection Handbook VICUCLAD VICUCLAD Applications Fire protection of metal ducts Construction of smoke extract ducts

More information

EASY APPLICATION. Furniture Linoleum

EASY APPLICATION. Furniture Linoleum EASY APPLICATION Furniture Linoleum can be applied easily on all common materials such as MDF, chipboard and Plywood as well as steel or composite materials. Furniture Linoleum has a special matte appearance

More information

Façade CUT-TO-SIZE FAÇADE STRIPS APPLICATION IN OVERLAP ON WOODEN SUPPORTING STRUCTURE APPLICATION INSTRUCTIONS 1 1. GENERAL

Façade CUT-TO-SIZE FAÇADE STRIPS APPLICATION IN OVERLAP ON WOODEN SUPPORTING STRUCTURE APPLICATION INSTRUCTIONS 1 1. GENERAL Façade CUT-TO-SIZE FAÇADE STRIPS APPLICATION IN OVERLAP ON WOODEN SUPPORTING STRUCTURE APPLICATION INSTRUCTIONS 1 1. GENERAL These application instructions are specifically intended for the fastening of

More information

SIMPLY DIFFERENT! VISCOM SIGN the lightweight foam board

SIMPLY DIFFERENT! VISCOM SIGN the lightweight foam board SIMPLY DIFFERENT! VISCOM SIGN the lightweight foam board VISCOM SIGN EASYPRINT SIMPLY DIFFERENT! This pure white surface skin combined with our high-performance Stadurlon material offers a combination

More information

The Passive Fire Protection Handbook

The Passive Fire Protection Handbook Uniclass L5:P:N3 CI/SfB Rf9 EPIC E:X:Y41 (K)+(K3) December 003 NBSPlus The Passive Fire Protection Handbook SUPALUX SUPALUX Applications Timber and steel frame partitions Single skin solid wall Fire protection

More information

The Passive Fire Protection Handbook

The Passive Fire Protection Handbook Uniclass L5:P:N3 CI/SfB Rf9 EPIC E:X:Y41 (K)+(K3) December 003 NBSPlus The Passive Fire Protection Handbook MASTERBOARD MASTERBOARD Applications Partitions Ceilings Wall and roof linings Soffit, porch

More information

INSTALLATION GUIDE DECKING.

INSTALLATION GUIDE DECKING. INSTALLATION GUIDE DECKING www.ttp-online.de/resysta CONTENT LATEST TEST RESULT Classification C, DIN 51097: Features, made by, best skid-resistance properties and is eminently suitable for wet barefoot

More information

DULUX UNIVERSAL UNDERCOAT

DULUX UNIVERSAL UNDERCOAT TECHNICAL DATA SHEET Version 1 2015 JUNE THIS ISSUE SUPERSEDES ALL PREVIOUS PUBLICATIONS PRODUCT DESCRIPTION Intermediate coating for use under decorative topcoats, for interior and exterior use PRODUCT

More information

Splashback Installation Instructions

Splashback Installation Instructions Splashback Installation Instructions What is Akril? Akril is an Australian made environmentally friendly, highly engineered polymer, enhanced with colour. Quite simply, it offers a new source of design

More information

VERSAROC CEMENT BONDED PARTICLE BOARD ROOF SHEATHING VERSAROC CEMENT BONDED PARTICLE BOARD ROOF SHEATHING

VERSAROC CEMENT BONDED PARTICLE BOARD ROOF SHEATHING VERSAROC CEMENT BONDED PARTICLE BOARD ROOF SHEATHING PRODUCT SUBMITTAL SHEET CEMENT BONDED PARTICLE BOARD ROOF SHEATHING A cement bonded particle board roof sheathing that can be combined with other fire resistant materials to create fire-rated roof assemblies.

More information

Ash Brook Golf Course Scotch Plains, New Jersey

Ash Brook Golf Course Scotch Plains, New Jersey SECTION 062013 - EXTERIOR FINISH CARPENTRY PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification

More information

Processing and design Solid Textile Board

Processing and design Solid Textile Board Processing and design Solid Textile Board List of contents Introduction Kerfing Joints and assembly Increasing thickness and stiffness Edges Cutting Milling and drilling Three-dimensional pressing Surface

More information

Installation Instructions

Installation Instructions Installation Instructions Roof edge trim profile Series TAG multi-piece aluminium profile Front face height: 250-1050 mm supplied with patented 4F brackets as standard height-adjustable, horizontally moveable,

More information

GREEN WORLD LUMBER GENUINE MAHOGANY DECKING INSTALLATION GUIDE

GREEN WORLD LUMBER GENUINE MAHOGANY DECKING INSTALLATION GUIDE GREEN WORLD LUMBER GENUINE MAHOGANY DECKING INSTALLATION GUIDE Genuine Mahogany is among the most durable natural wood decking available. When properly installed and maintained, you should have a beautiful

More information

Cembrit Patina. Cembrit Cover. Cembrit Solid. Cembrit Transparent

Cembrit Patina. Cembrit Cover. Cembrit Solid. Cembrit Transparent Rainscreen Cladding Your choice. In addition to the range of colours and shades, Cembrit cladding boards are available in four compositions, each with distinctive performance and characteristics. Cembrit

More information

Data Sheet 5741 Englisch

Data Sheet 5741 Englisch Data Sheet 5741 Englisch 2K-PUR-Acryl Silk Gloss 2K-PUR-Acryl Seidenglanzlack 5741 two-component, high mechanical resistance, for exterior and interior use, with 2K-PUR-Acryl Hardener 5770 2K-PUR-Acryl

More information

CINTRALUX ALU BARREL VAULT EP 10/10

CINTRALUX ALU BARREL VAULT EP 10/10 CINTRALUX ALU BARREL VAULT EP 10/10 Installation instructions EN 14963 Artn 43984 E_MH_Cintralux EP 10/10 mm AG.PLASTICS QUALITY 1 Installation instructions Cintralux aluminium barrel vault: Cintralux

More information

Knowledge about display stand wood materials. Fuyuan wood factory learning summary reporter:willian

Knowledge about display stand wood materials. Fuyuan wood factory learning summary reporter:willian Knowledge about display stand wood materials Fuyuan wood factory learning summary reporter:willian Ⅰ wood 1.Particleboard 2. MDF 3. Plywood 4. Solid wood board Ⅱ mechanical equipment 1. Automatic cutting

More information

WITH HEAT - NATURALLY

WITH HEAT - NATURALLY WITH HEAT - NATURALLY Clock House, Station Approach, Shepperton, Middlesex TW17 8AN T +44 (0)1932 256590 F +44 (0)1932 229989 E info@mbmspeciality.co.uk W www.mbmspeciality.co.uk Continue About the company

More information

VIEWpanel Technical Manual

VIEWpanel Technical Manual VIEWpanel Technical Manual VIEWpanel is a prefabricated panel comprising 0.21 aluminium skin (1100 alloy) both sides, apart from our lite grade, which is 0.12 aluminium skin both sides and a polyethylene

More information

Five Star Panel Installation Instructions

Five Star Panel Installation Instructions Five Star Panel Installation Instructions How to Store Five Star Panels You will need to store FIVE STAR PANELS in dry place to prevent staining, deterioration and possibly void all warranties. Stand the

More information

Installation Instructions for Bifold Doors (JII103)

Installation Instructions for Bifold Doors (JII103) Thank you for selecting JELD-WEN products. Attached are JELD-WEN s recommended installation instructions for premium composite, hollow and solid core molded Bifold Doors. Bifolds are designed for fast

More information

NOTE: This product can be used externally if UV Guard is added (BY REQUEST ONLY).

NOTE: This product can be used externally if UV Guard is added (BY REQUEST ONLY). Product Description PHOENIX PAINTS MAXICOAT 100 is a 2 Pack Water-Dispersed Top Coat which not only exhibits the physical and chemical strengths of epoxy, but also the safety and convenience of water as

More information

WET AREA PANELLING. Designer Walls. Fast

WET AREA PANELLING. Designer Walls. Fast WET AREA PANELLING Designer Walls. Fast AU/a5 WallART Brochure_ART BUNNINGS.qxp_Layout 1 7/6/18 10:16 am Page 3 LINEAR SERIES WET AREA PANELLING Add a touch of class to your SHEET COLOURS home or workplace

More information

INSTALLATION GUIDE DUOFUSE SLAT WALL SYSTEM

INSTALLATION GUIDE DUOFUSE SLAT WALL SYSTEM 06/2013 ENG 1 INSTALLATION GUIDE DUOFUSE SLAT WALL SYSTEM The Duofuse wood composite slat wall system is much more durable than wooden fences, and correct installation is necessary to enjoy the fences

More information

Gluing windows with SABA Glasstack 760

Gluing windows with SABA Glasstack 760 Info sheet 208 Gluing windows with SABA Glasstack 760 Version 2008-05-08 EN, replaces all prior versions Page 2 of 9 Info sheet 208 Gluing windows with SABA Glasstack 760, version 2008-05-08 EN 1. Introduction

More information

EZYSTONE WORKSURFACES

EZYSTONE WORKSURFACES EZYSTONE WORKSURFACES Installation & Maintenance Instructions 1. Tools Required Worktop Edge Finishing Kit Pack 1-100mm Velcro Backing Pad Pack 2-100mm Diamond Dry Cut Velcro Discs (100 Grit Yellow) (200

More information

SlipGrip Data Sheet & Installation Guide

SlipGrip Data Sheet & Installation Guide SlipGrip Data Sheet & Installation Guide Stair Treads Landing Covers Flat Sheets 9/2015 SlipGrip Technical Data Description SlipGrip products are high performance safety stair treads, landing covers and

More information

Tape Measure Metal Clippers Screw Bit Set With Extensions

Tape Measure Metal Clippers Screw Bit Set With Extensions IMPORTANT: Read through instructions thoroughly before beginning to replace any damaged material. Minor damage can be fixed with a fiberglass repair kit and color matched paint. Tools Required Tape Measure

More information

POWER VLIES STRETCH 160

POWER VLIES STRETCH 160 Product Information Manufacturer: Architects Paper A brand of A.S. Création Tapeten AG Südstr. 47 51645 Gummersbach www.architects-paper.com Product Name POWER VLIES STRETCH 160 Quick Start Guide - The

More information

COMPOSITE SIDING INSTALLATION GUIDE

COMPOSITE SIDING INSTALLATION GUIDE CENTURY HOME LIVING COMPOSITE SIDING INSTALLATION GUIDE Read all instructions prior to installing any siding product. Failure to install and finish this product in accordance with all local building codes,

More information

STACKING MULTI-SLIDE DOOR SYSTEM INSTALLATION INSTRUCTIONS

STACKING MULTI-SLIDE DOOR SYSTEM INSTALLATION INSTRUCTIONS STACKING MULTI-SLIDE DOOR SYSTEM INSTALLATION INSTRUCTIONS 1290363 Revision 1 12/16 Page 1 Weather Shield Mfg., Inc. NOTICE CAUTION! Failure to install and maintain our product according to these instructions

More information

FABRICATION MANUAL CCM Copper Composite You discover why ALPOLIC Copper composite material (CCM) is the building material of the future as soon as

FABRICATION MANUAL CCM Copper Composite You discover why ALPOLIC Copper composite material (CCM) is the building material of the future as soon as FABRICATION MANUAL CCM Copper Composite You discover why ALPOLIC Copper composite material (CCM) is the building material of the future as soon as you fabricate it. Our CCM is as easy to fabricate as wood:

More information

Edgebanders AURIGA Compact and extremely high performance. Spezialmaschinen. With copy cutter unit

Edgebanders AURIGA Compact and extremely high performance. Spezialmaschinen. With copy cutter unit UNO AURIGA 1303/1304/1306/1307 SPRINT ARCUS CONTRIGA AURIGA 1306 1307 Compact and extremely high performance With copy cutter unit Edgebanders Your partner for productivity and precision Spezialmaschinen

More information

Wet Area Panelling. Linear Series

Wet Area Panelling. Linear Series Wet Area Panelling Linear Series LINEAR SERIES WET AREA Add a touch of class to your home or workplace with the Linear Series, WallART s line of wet area panelling. With a striking range of colours and

More information

Ignitability Index Spread of Flame Index Heat Evolved Index Smoke Developed Index. Range 0-20 Range 0-10 Range 0-10 Range

Ignitability Index Spread of Flame Index Heat Evolved Index Smoke Developed Index. Range 0-20 Range 0-10 Range 0-10 Range (Expressed Panel Facade System) is a versatile, glass fibre-reinforced, recycled wood fibre and magnesium cement based cladding. The panels are fabricated from a combination of recycled timber materials,

More information

PROVEN WISA PLYWOOD FOR CONCRETE FORMING on time and on the spot to grow your business

PROVEN WISA PLYWOOD FOR CONCRETE FORMING on time and on the spot to grow your business PROVEN WISA PLYWOOD FOR CONCRETE FORMING on time and on the spot to grow your business WISA MEETS YOUR REQUIREMENTS UPM has been manufacturing plywood for over a century and as an active supplier to the

More information

Glass Systems. Technical Information on Pilkington Profilit Profiled Glass with System. - English Edition - Pilkington Profilit

Glass Systems. Technical Information on Pilkington Profilit Profiled Glass with System. - English Edition - Pilkington Profilit Glass Systems Technical Information on Profiled Glass with System - English Edition - The - Delivery Programme Glass thickness 6 mm, flange height mm 6 7 0 K 3 8 K//7 3 6 7 6 6 6 6 6 6 50 39 486 K5 6 K3

More information

External cladding technical instructions

External cladding technical instructions External cladding technical instructions Contents External cladding technical instructions... 1 General... 2 Vertical cladding... 3 Horizontal cladding... 5 Lower end of the cladding and the plinth...

More information

PAREFEU PANEL Environmentally Sustainable Product with High Fire Rating

PAREFEU PANEL Environmentally Sustainable Product with High Fire Rating PAREFEU PANEL Environmentally Sustainable Product with High Fire Rating WHY PAREFEU PANEL Parefeu Panels is made from special fire rated minerals that have been reinforced with palm fibres and glass fibres

More information

miramondo Technical Informations 1/10 Hop Hop

miramondo Technical Informations 1/10 Hop Hop 1/10 Hop Hop Technical Informations Hop Hop 2/10 Dimensions 1300 Hop Hop 3/10 Dimensions 615 650 1300 1950 800 635 460 615 650 1300 1950 800 460 615 650 1300 1950 800 635 460 615 650 1300 1950 800 460

More information

Installation Guide (888)

Installation Guide (888) BamDeck Installation Guide (888) 788-2254 The Collection Decking Systems BAMDECK 4G 5-7/16 Wide Plank Dims: 192 L x 5-7/16 W x 13/16 H BAMDECK 4G WIDE 8-1/4 Wide Plank Dims: 96 L x 8-1/4 W x 13/16 H BAMDECK

More information

1. PREPARATION OF THE SUBSTRATE CLIMATIC CONDITIONS MARKING THE POSITION CUTTING GLUING 17 18

1. PREPARATION OF THE SUBSTRATE CLIMATIC CONDITIONS MARKING THE POSITION CUTTING GLUING 17 18 INDEX MOUNTING 1. PREPARATION OF THE SUBSTRATE 4 2. CLIMATIC CONDITIONS 4 3. MARKING THE POSITION 4 5 4. CUTTING 6 5. GLUING 6 7 6. TREATMENT OF THE JOINTS 7 7. MECHANICAL FASTENING 8 8. CONTACT SURFACE

More information

Installing Digital Wallcoverings

Installing Digital Wallcoverings Installing Digital Wallcoverings Hints & Tips Muraspec Digital (Hints & Tips) 1 BEFORE YOU START Make sure that your image is intact and has not been damaged in transit. For best results, use only Murabond

More information

Installation Instructions: Urbanline Valchromat MDF Panelling

Installation Instructions: Urbanline Valchromat MDF Panelling Product Description is a Premium coloured wood product. It is a relatively high density wood fibre panel engineered to provide colour right throughout. is a natural product and therefore susceptible to

More information

10 YEAR GUARANTEE. Vistalux corrugated sheeting is the ideal general purpose PVC sheet for roofing and cladding PVC SHEET WITH HIGH LIGHT TRANSMISSION

10 YEAR GUARANTEE. Vistalux corrugated sheeting is the ideal general purpose PVC sheet for roofing and cladding PVC SHEET WITH HIGH LIGHT TRANSMISSION INSTALLATION GUIDE ECONOMICAL PVC SHEET WITH HIGH LIGHT TRANSMISSION 10 YEAR GUARANTEE Vistalux corrugated sheeting is the ideal general purpose PVC sheet for roofing and cladding Economic, lightweight

More information

Adorn Mortarless Stone Veneer Installation Natural Concrete Products

Adorn Mortarless Stone Veneer Installation Natural Concrete Products Adorn Mortarless Stone Veneer Installation Adorn Mortarless Stone Veneer can be used on new or existing construction. Adorn is nailed or screwed onto the wall; therefore no brick ledge is required. Adorn

More information

SECTION INTERIOR FINISH CARPENTRY

SECTION INTERIOR FINISH CARPENTRY SECTION 06 20 23 PART 1 - GENERAL 1.01 SUMMARY A. Section includes the following items for field-applied paint finish: 1. Interior standing and running trim. 2. Interior plywood paneling. B. Related Sections

More information

GOLDENEDGE MDF PANELBRACE WALL BRACING SYSTEMS. Product. Scope. Building Regulations. Appraisal No. 779 [2018] Logo

GOLDENEDGE MDF PANELBRACE WALL BRACING SYSTEMS. Product. Scope. Building Regulations. Appraisal No. 779 [2018] Logo PANELBRACE WALL BRACING This Appraisal replaces Appraisal No. 779 (2013). s Technical Assessments of products for building and construction. Logo Nelson Pine Industries Limited PO Box 3049 Richmond Nelson

More information

Installation guide. MS 9 & Metal Block Profile

Installation guide. MS 9 & Metal Block Profile Installation guide MS 9 & Metal Block Profile WARNING: The material may contain sharp edges. We recommend you wear adequate protection gear, namely safety boots, a helmet, safety goggles and gloves. WARRANTY

More information

GARDEN SHED BRIGHTOLN

GARDEN SHED BRIGHTOLN ASSEMBLY INSTRUCTIONS GARDEN SHED BRIGHTOLN Dimensions: 10x10 (1 1/8") IMPORTANT Before beginning the assembly of your garden shed, please read the instructions carefully and follow them closely. By doing

More information

Installation instructions: Elements Vulcan+ Newport Hector Cladding

Installation instructions: Elements Vulcan+ Newport Hector Cladding Technical Data Wood Species Thermally Modified Softwood (Pinus Radiata) Images Profile Newport Hector - Light Band Sawn face - Secret fix 5.4 6.0 8.5 3.0 25.0 3.0 111.0 3.0 12.0 R 3.0 7.0 7.0 123.0 15.0

More information

LVL8 H1.2 GENERAL FRAMING. Eco Friendly Revolutionary H1.2 Treatment Azotek by Zelam

LVL8 H1.2 GENERAL FRAMING. Eco Friendly Revolutionary H1.2 Treatment Azotek by Zelam LVL8 H1.2 GENERAL FRAMING Eco Friendly Revolutionary H1.2 Treatment Azotek by Zelam NPIL/MARCH2015 Introduction to NelsonPine LVL8 H1.2 NelsonPine LVL is an engineered wood composite made from rotary peeled

More information

METHOD STATEMENT. Sika FloorJoint S

METHOD STATEMENT. Sika FloorJoint S METHOD STATEMENT Table of Contents 1 SCOPE 3 2 PRODUCT 3 2.1 3 3 SUBSTRATE REQUIREMENTS 3 4 Preparation of the Substrate 3 4.1 Mapping of the joint panels on the floor for the saw cuts 3 4.2 Execution

More information

I N S TA L L AT I O N & M A I N T E N A N C E G U I D E

I N S TA L L AT I O N & M A I N T E N A N C E G U I D E I N S TA L L AT I O N & M A I N T E N A N C E G U I D E E N V I R O B U I L D. C O M + 4 4 ( 0 ) 2 0 8 0 8 8 4 8 8 8 Version 3.2 EnviroBuild 2018 C O N T E N T S Storage & Handling 03 Tools 04 Calculating

More information

HM OUTDOOR TABLE:HM OUTDOOR TABLE 25/7/08 11:18 AM Page 30

HM OUTDOOR TABLE:HM OUTDOOR TABLE 25/7/08 11:18 AM Page 30 HM080827 OUTDOOR TABLE:HM080827 OUTDOOR TABLE 25/7/08 11:18 AM Page 30 The treated-pine frames of the table and benches are topped with sturdy blackbutt timber. HM080827 OUTDOOR TABLE:HM080827 OUTDOOR

More information

INSTALLATION GUIDE INSTALLATION GUIDE EKODECK SHOULD NOT: IMPORTANT INFORMATION

INSTALLATION GUIDE INSTALLATION GUIDE EKODECK SHOULD NOT: IMPORTANT INFORMATION INSTALLATION GUIDE INSTALLATION GUIDE EKODECK SHOULD NOT: To achieve a safe and long lasting Ekodeck installation, it is important to read the following guide in full. Be used as a structural or load bearing

More information

SECTION COUNTERTOPS ecox PART 1 GENERAL

SECTION COUNTERTOPS ecox PART 1 GENERAL SECTION 11456 COUNTERTOPS ecox PART 1 GENERAL 1.1 SECTION INCLUDES A. Countertops B. Bar tops C. Vanity tops D. Table tops E. Reception counters F. Cash/back wraps G. Transaction counters H. Service counters

More information

15 YEARS GUARANTEE no swelling no cracking no splintering no rotting

15 YEARS GUARANTEE no swelling no cracking no splintering no rotting I N S TA L L AT I O N R E F E R E N C E S R E S Y S TA FA C A D E 15 YEARS GUARANTEE no swelling no cracking no splintering no rotting 1 1. Basics 2. Product Range 3. General Information 4. Pre-Treatment

More information

Rev. 05/16 01 ACRYLIC INSTALLATION GUIDE

Rev. 05/16 01 ACRYLIC INSTALLATION GUIDE Rev. 05/16 01 ACRYLIC INSTALLATION GUIDE Contents 1.0 Inspection 3 2.0 Storage 3 3.0 Handling 3 4.0 Planning & Preparation 3 5.0 Panels 4 6.0 Accessories 4 7.0 Tools & Fixings 4 8.0 Fitting Tips 5 9.0

More information

Symbiosis of protection and beauty CETOL WF 771. Passion for wood NOW ALSO WITH METALLIC EFFECT!

Symbiosis of protection and beauty CETOL WF 771. Passion for wood NOW ALSO WITH METALLIC EFFECT! Symbiosis of protection and beauty CETOL WF 771 NOW ALSO WITH METALLIC EFFECT! Passion for wood Only the best for your wood Which material is better suited to the garden and to terraces than natural wood?

More information

Installation guide. MS 14 Metal Siding

Installation guide. MS 14 Metal Siding Installation guide MS 14 Metal Siding 2 CAUTION: The material may have sharp edges. We recommend using protection equipment, including safety boots, helmet, goggles and gloves. WARRANTY FOR THE WARRANTY

More information

Internal timber. Preservation. Timber preservation, fire retardants and coatings

Internal timber. Preservation. Timber preservation, fire retardants and coatings Internal timber Preservation Timber preservation, fire retardants and coatings Treated Timber Specification Sentrin Preserve LP, (low pressure), treated timber has built in long term protection against

More information

Contents. Storage and Handling. 4. Usage. 5. Wood Moisture Content. Cutting and Machining. 6. Screws and Fasteners. 7. Gluing.. 8. Painting.

Contents. Storage and Handling. 4. Usage. 5. Wood Moisture Content. Cutting and Machining. 6. Screws and Fasteners. 7. Gluing.. 8. Painting. ON Contents Storage and Handling. 4 Usage. 5 Wood Moisture Content..5 Cutting and Machining. 6 Screws and Fasteners. 7 Gluing.. 8 Painting. 9 Outdoor Use. 9 Weathering Effects on uncoated MTE. 10 Enhanced

More information

MAXISHINGLE LAP SIDING INSTALLATION GUIDE

MAXISHINGLE LAP SIDING INSTALLATION GUIDE MAXISHINGLE LAP SIDING INSTALLATION GUIDE Read all instructions prior to installing any siding product. Failure to install and finish this product in accordance with all local building codes, regulations

More information

terraza and structura Installation Instructions. Privacy Shield Systems

terraza and structura Installation Instructions. Privacy Shield Systems terraza and structura Installation Instructions. Privacy Shield Systems No warranty or approval in case of non-compliance Up-to-date installation instructions and drawings: www.werzalit.com Version 04

More information

ODEK shared 50% of Ukrainian plywood production in 2010, 48% in 2011 and 2012.

ODEK shared 50% of Ukrainian plywood production in 2010, 48% in 2011 and 2012. About Company The history of the plywood factory has started at the end of the XIX century when the Society of mechanical wood processing was founded in Orzhiv, Rivne region, Ukraine. Over a period of

More information

Wall flashing profiles FP 60 WA 1 WA 150 WA 1 - ÜK WA 1 - Ü 150 E

Wall flashing profiles FP 60 WA 1 WA 150 WA 1 - ÜK WA 1 - Ü 150 E Wall flashing profiles FP 60 WA 1 WA 150 WA 1 - ÜK 150-275 WA 1 - Ü 150 E 1 F Ü R D I E ZU K U N FT G E DAC HT. The alwitra waterproofing system alwitra wall flashing profiles are part of the practically

More information

BUILDING A TREE BENCH

BUILDING A TREE BENCH INSTRUCTIONS FOR A In just a few steps, we show you how to build your own tree bench and paint it perfectly. 1 SIDE PIECES OF THE SEATING SURFACE Purchase the materials from the enclosed list. Draw a 10

More information

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS www.falconpp.co.uk FACADE SYSTEMS INSTALLATION INSTRUCTIONS CONTENTS Contents Benefits page 3 Basics page 4 Installation tips page 5 Colour Glaze (FVG) and Sealing (RFS) page 6 Product range page 7 FACADE

More information

Installation Instructions Palladium 3D Hi Impact Wall System, Partial Height with Color Matched Caulk Joints

Installation Instructions Palladium 3D Hi Impact Wall System, Partial Height with Color Matched Caulk Joints Please read all instructions before installing Palladium 3D Hi Impact Wall System.. Before installation: a. Acclimate rigid sheet, Palladium 3D boards, adhesives and wall substrates to room temperature

More information

SECTION INTERIOR FINISH CARPENTRY PART 1 - GENERAL 1.1 RELATED DOCUMENTS

SECTION INTERIOR FINISH CARPENTRY PART 1 - GENERAL 1.1 RELATED DOCUMENTS SECTION 062023 - INTERIOR FINISH CARPENTRY PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification

More information

Working with Wood and Wood Materials

Working with Wood and Wood Materials Working with Wood and Wood Materials Excerpt from the Bosch Encyclopedia of Power Tools. Written & Published by ROBERT BOSCH GmbH and Robert Bosch Tool Corporation. The grain direction of the fibers determines

More information

WOODWORKS Walls. Installation Instructions WALL

WOODWORKS Walls. Installation Instructions WALL WALL Systems Between us, ideas become reality WOODWORKS Walls Installation Instructions 1. GENERAL 1.1. Product Description WoodWorks walls consist of 2' x 4', 2' x 8', 2' x 9' or 2' x 10' perforated and

More information

Technical Documentation

Technical Documentation Technical Documentation Edition 02/2016 Create New Worlds Shape, color, material - they all convey emotions, tell stories, inspire new ideas. And they all give our buildings and homes character. With this

More information

Eaves Lining Installation Guide

Eaves Lining Installation Guide Eaves Lining Installation Guide feb 13 Design Pine Eaves Lining - Installation Like most building products, Design Pine eaves lining has both advantages and limitations therefore a clear understanding

More information

User s manual. Proper handling and storage of panels will help you maintain the high performance level of Uniboard products.

User s manual. Proper handling and storage of panels will help you maintain the high performance level of Uniboard products. User s manual STORAGE AND HANDLING OF PANELS Proper handling and storage of panels will help you maintain the high performance level of Uniboard products. RECEIVING Receiving your panels is the first step

More information

SECTION CARPENTRY

SECTION CARPENTRY SECTION 06100 CARPENTRY PART 1 GENERAL 1.01 SUMMARY A. Section Includes: Carpentry work including grounds, nailers, blocking, miscellaneous framing, plywood backing panels, plywood sheathing, preservative

More information

miramondo Technical Informations 1/7 La Strada

miramondo Technical Informations 1/7 La Strada 1/7 La Strada Technical Informations public design GmbH - Hanuschgasse 1 Objekt 31-2540 Bad Vöslau - Austria - office@.com - www..com La Strada 2/7 Dimensions 563 650 1300 1950 830 610 563 650 1300 1950

More information

QUARTZ FABRICATION MANUAL

QUARTZ FABRICATION MANUAL QUARTZ FABRICATION MANUAL Quartz Fabrication Manual Rev. 1 Page 1 of 26 TABLE OF CONTENTS Product Description. 3 Slab Inspection.. 4 Fabrication Equipment.. 6 FABRICATION TIPS Cutting The Slab. 7 General

More information

Inteplast Trim Free Foam

Inteplast Trim Free Foam Inteplast Trim Free Foam SECTION 06 60 00 PLASTIC FABRICATIONS PART 1 GENERAL 1.01 SECTION INCLUDES A. Inteplast Trim Free Foam cellular PVC boards used for corner boards, soffits, fascias, battens, door

More information

TRANSFORMER MANUAL. Bérkel Acrylic Mirror

TRANSFORMER MANUAL. Bérkel Acrylic Mirror TRANSFORMER MANUAL Bérkel Acrylic Mirror TRANSFORMER MANUAL BÉRKEL ACRYLIC MIRROR Light and resistant, Bérkel Acrylic Mirrors were developed to a wide rande of application substituting glass mirrors, especially

More information

RENU PANELING SYSTEM Installation Guide PLEASE READ GUIDE COMPLETELY BEFORE ASSEMBLY. Version 1.0 ALL STATED SIZES ARE NOMINAL DIMENSIONS.

RENU PANELING SYSTEM Installation Guide PLEASE READ GUIDE COMPLETELY BEFORE ASSEMBLY. Version 1.0 ALL STATED SIZES ARE NOMINAL DIMENSIONS. RENU PANELING SYSTEM Installation Guide Version 1.0 PLEASE READ GUIDE COMPLETELY BEFORE ASSEMBLY. ALL STATED SIZES ARE NOMINAL DIMENSIONS. Components Trim Track (TT) 1" x 1 3 4" (GER3TTAA): fastens to

More information

EWI Install Guide. Thin Coat Render

EWI Install Guide. Thin Coat Render EWI Install Guide Thin Coat Render STEP 1 Substrate Preparation As with any construction project, preparation is extremely important. Before applying any insulation to the substrate, it needs to be examined

More information