BESSEY Training BESSEY Tools North America Alvin Products: Lab Metal, Lab Solvent
|
|
- Christopher Flowers
- 6 years ago
- Views:
Transcription
1 BESSEY Training BESSEY Tools North America Alvin Products: Lab Metal, Lab Solvent Page 1-1
2 Lab Metal A ready to use, aluminum filled metal repair, filler and patching compound. Easy to use Ready to use straight out of the can. No measuring & mixing of components required. Does not require any special tools or skills to use. Versatile Can be spread with a putty knife straight from the can. OR With the use of Alvin Lab-solvent, Lab-metal may thinned to the consistency of paint for brushing or spraying on to practically any surface. Will adhere to any clean & dry metal, wood, glass, porcelain, or hard plastic surface. Once hardened it can be milled, drilled, tapped, sawed, filed or sanded. When hard it is not affected by mild acids, gasoline, oil or petroleum based solvents Does not rust. Withstands temperatures as high as 350 deg. F (177 deg. C) Shelf life: 2 years in factory sealed can. Page 1-2
3 Lab Metal Technical Data Color: Metal grey. Hardness: 81 on Shore D scale. Linear Thermal Expansion Coefficient: per deg. F per deg. C. Strength: Tensile: 650 lbs/sq.inch Compressive: 20,000 lbs/sq.inch Drying time: 1/16 thick 1-2 hours 1/8 thick 3-4 hours Thinned, brushed or sprayed on layers will cure more quickly. Shelf life: Factory sealed can - 2 years. Adhesion: Excellent providing surfaces are clean & dry. *** Lab-metal will not bond 2 parts together, requires exposure to air to properly cure *** Page 1-3
4 Product Application Thinning Lab-metal: One part Lab-metal to one part Lab-solvent provides a good brushing consistency. Smoothing Lab-metal: When using Lab-metal as a body filler, dip the applicator into the Lab-solvent to enhance spreading. Building up Lab-metal: For thick applications or deep holes, apply Labmetal in thin layers, allowing each to harden before applying the next layer. Page 1-4
5 Hi Temp Lab Metal Does everything regular lab metal can with the added benefit of; after heat treating, being able to withstand temperatures up to 1000 deg. F. (538 deg. C.). Physical characteristics are the same as regular lab-metal. Can also be thinned to a paint with Lab-solvent. Drying time: Allow to harden for at least 24 hours at room temperature, then heat 425 deg. F (218 deg. C) for 1 hour. Shelf life: Factory sealed can = 1 year. Page 1-5
6 Hi Temp Lab Metal Tips The heat cure: After Hi-Temp Lab-metal is fully air dried to a hard metal state, it must be heat treated at 425 o F for one hour. This must be completed prior to the powder coating process. Improper cure: If the air dry or heat cure process is rushed or ignored, out gassing may occur. Page 1-6
7 Lab Solvent Thinner for Lab-metal & Hi-temp Lab-metal. A mixture of Toluene & Acetone Excellent cleaner & degreaser for surface preparation. Remember: surfaces must be clean & dry for Lab-metal products to adhere properly. Pour a little over the top of unused portion in can before resealing can. Shelf life can be extend indefinitely as long as Lab-metal is kept moist with Lab-solvent. Page 1-7
8 Lab Metal Markets and Distributors Uses for Lab-metal can be found in many industries: Foundries Powder Coaters Welders, Fabricators, Metalworkers Construction, Transportation Machine & Body Shops Power Plants, Factories Transportation Agriculture, Equipment Woodworking / Wood turners The above markets (and more) are served by distributors including: Industrial Supply Welding Supply Woodworking Supply Marine and Construction Supply Plumbing Supply and even the Do-It-Yourself market through Hardware Stores, Home Centers & Automotive Supply Stores Page 1-8
9 Prospect Suggestions Air conditioning contractor Aluminum fabricators Aluminum products Auto repair / restoration shops Bearing users Concrete construction forms Contractors equipment & supplies (and repairing) Dairies Die casting / dies Dish washing machines repairing Electric contractors Display designers and producers Forgings Foundries Heating contractors Hydraulic shaft repairing Machine shops Machine tools Machinery / equipment manufacturing and repair Metal building contractors (pre-cut / pre-fab) Metal finishers Metal furniture manufacturers Metal sculptors Metalworking specialties Metal window and door producers Molds / plastic molds Ornamental metalworkers Partitions Pattern makers Plastic molders Plumbing contractors Powder coaters Sheet metal products / producers Sheet metal workers Sign manufacturers Sign maintenance and repairing Steel fabricators Truck repairing and service Welders Page 1-9
10 Product Applications Lab-metal repairs damaged and worn surfaces on: Aluminum boats Stripped threads Worn valves and shafts Cylinder heads Water and fuel tanks, pumps Radiators, cracked engine blocks Lawn mowers Furnaces Pipes Plant equipment and machinery Metal castings, patterns, molds Concrete Gutters Metal furniture and much more Page 1-10
11 Lab-metal in action Blades of a Francis Runner (a type of turbine used in power generation) being resurfaced Page 11
12 Lab-metal in action Before sanding Lab-metal being used to smooth over rough welds After sanding Page 12
13 Lab-metal in action Foundry and metal casting industry Lab-metal has been used since 1950 to patch flaws in metal castings. Hi-Temp Lab-metal is used by foundries for core box repairs. Page 13
14 Lab-metal in action Transportation industry Lab-metal repairs pitted and corroded train caboose railings. Page 14
15 Lab-metal in action Woodturning, metal sculpting applications Lab-metal is used in artistic, decorative and ornamental metalwork. Silvering : Wood turners use Lab-metal as a decorative filler Sculpture made of Lab-metal on display in a museum Page 15
16 Hi-Temp Lab-metal in action Powder coating application: Cast iron lion statue repaired with Hi-Temp Lab-metal, then powder coated. Page 16
17 Thank you for your attention! BESSEY Tools North America Page 1-17
Repairing Sheet-Molded Compound (SMC) With Epoxy
Repairing Sheet-Molded Compound (SMC) With Epoxy 1. Properties: A. It does not dent. B. It does not rust C. Panels are formed using a flat sheet or compound that is heat molded in a press. 2. Preparation
More informationCONTENTS TABLE OF. Introduction. Company Details. Organization Chart. Certificates & Insurances. Our Products. List of machineries and Equipment
TABLE OF CONTENTS Introduction... 01 Company Details... 02 Organization Chart... 04 Certificates & Insurances... 05 Our Products... 10 List of machineries and Equipment... 31 Other Companies of Group...
More informationBuilding Tip TIP 1: Painting Metal You may want to superdetail your loco before painting. We suggest that you do not paint your loco until it is thoroughly track tested as disassembly and handling generally
More informationGluing windows with SABA Glasstack 760
Info sheet 208 Gluing windows with SABA Glasstack 760 Version 2008-05-08 EN, replaces all prior versions Page 2 of 9 Info sheet 208 Gluing windows with SABA Glasstack 760, version 2008-05-08 EN 1. Introduction
More informationSTC-COMBI - Industrial Storage & Tooling Cabinet Package Deal
STC-COMBI - Industrial Storage & Tooling Cabinet Package Deal 900 x 450 x 1800mm 150kg Shelf Load & 75kg per Drawer Load Capacity Ex GST Inc GST $1,060.00 $1,166.00 ORDER CODE: MODEL: Shelf Load Capacity
More informationInstallation Instructions
www.marlite.com Effective Date 03/01/2018 ARTIZAN FRP, SYMMETRIX FRP, ENVUE FRP, STANDARD FRP Installation Instructions Statements expressed in this technical bulletin are recommendations for the application
More informationIWB-12 - Industrial Work Bench
IWB-12 - Industrial Work Bench 1200 x 750 x 900mm 1000kg Load Capacity Ex GST Inc GST $270.00 $297.00 ORDER CODE: A415 MODEL: Type: IWB-12 Steel with Laminated Top Table Top Load Capacity (kg): Number
More informationInstallation Guide. Pionite Decorative Surfaces One Pionite Road, Auburn, Maine PIONITE ( )
Installation Guide A Subsidiary of Panolam Surface Systems SMPBRO00-012 6/14 Pionite decorative laminates are designed for finished interior surfaces which require high impact, wear and stain resistance
More informationSECTION METAL FABRICATIONS
SECTION 05100 PART 1 - GENERAL 1.01 DESCRIPTION A. Section includes specifications for metal fabrications, including minimum requirements for fabricator, and galvanizing. 1.02 REFERENCE STANDARDS A. ASTM
More informationPaint, Caulk & Adhesives
Paint, Caulk & Adhesives Keep your equipment looking great with these industrial enamel paints. Find the exact paint for your tractor or implement with brand-specific paints from Ag Specialty or the Industrial-grade
More informationCONCEPT MODELS INSTRUCTIONS FOR PRODUCT 60,000 GALLON TANK CAR El Toro Way Stockton, CA 95210
CONCEPT MODELS Web Address: http://www.con-sys.com Email: concept_models@con-sys.com 8810 El Toro Way Stockton, CA 95210 INSTRUCTIONS FOR PRODUCT 60,000 GALLON TANK CAR 2 CONCEPT MODELS PARTS GATX/UTLX
More informationACORNWIRE.COM MESH PARTITIONS DIVISION 10 - SPECIALTIES WIRE MESH PARTITION FOLDING GATE
acorn WIRE ACORNWIRE.COM MESH PARTITIONS DIVISION 10 - SPECIALTIES 10 22 13 WIRE MESH PARTITION 10 22 16 FOLDING GATE GUIDE Page 4 / 5 No. 130A All wire type for normal industrial use. 7, 8, 9, 10 and
More information1 ZSI Product Experience Examples
www.zsind.com 1 ZSI Product Experience Examples www.zsind.com 2 Casting and machining (1) 1 Material: Grey Iron GG25 Process: Sand Casting Vacuum Pump 2 Material: Cast Iron GG25, GGG40 Process: Sand Casting
More information380 Swimming Pool Paint
Issued 21 st April 2010 PRODUCT DATA SHEET UNPAINTED CEMENT 380 Swimming Pool Paint SURFACE PREPARATION New cement or render should be allowed to cure for at least 21-28 days before any preparation is
More informationA strong clear liquid that bonds most materials in seconds. A quality product for the DIY enthusiast Great for emergency repairs.
Superglue Super Glue 3G - 3 s A strong clear liquid that bonds most materials in seconds. A quality product for the DIY enthusiast Great for emergency repairs. Super Glue 3G - Single A strong clear liquid
More informationjoining materials - wood
UNIT D E S I G N A N D M A N U F A C T U R E : C O U R S E M A T E R I A L Wood joints joining materials - wood The majority of joints used in woodcraft have been designed specifically to attain the maximum
More informationRebuilding of Cylinder Rams
APPLICATION REPORT Rebuilding of Cylinder Rams Application: Place: Rebuilding of Cylinder Rams On site, offshore, Norway Date: September 2012 Job and report done by: Wencon products used: Assens Shipyard,
More informationDULUX UNIVERSAL UNDERCOAT
TECHNICAL DATA SHEET Version 1 2015 JUNE THIS ISSUE SUPERSEDES ALL PREVIOUS PUBLICATIONS PRODUCT DESCRIPTION Intermediate coating for use under decorative topcoats, for interior and exterior use PRODUCT
More informationQuality Marine Equipment Since Antifouling Paint For Metal Under The Waterline ROLLER. Application Instructions.
Quality Marine Equipment Since 1981 Antifouling Paint For Metal Under The Waterline ROLLER Application Instructions www.antifoulingpaint.net THANK YOU! Thank you for selecting Velox Plus Antifouling Paint
More informationProduct Brochure For T739. Description. Features. Sydney: (02) Brisbane: (07) Melbourne: (03) Perth: (08)
ITB-S3 - Industrial Tool Box Set (30", 36", 48") Package Deal 1 x Gas Strut on 36", 2 x Gas Struts 48" (762 x 356 x 254mm) + (915 x 432 x 540mm) + (1220 x 615 x 720mm) Ex GST Inc GST $590.00 $649.00 ORDER
More informationChapter 1 Sand Casting Processes
Chapter 1 Sand Casting Processes Sand casting is a mold based net shape manufacturing process in which metal parts are molded by pouring molten metal into a cavity. The mold cavity is created by withdrawing
More informationINSTALLATION GUIDE. 5" Balustrade System
5" Balustrade System PARTS LIST ITEM QTY A PORCH POST INSTALLATION KIT (PPK6) (SEE STEP 3C) 5 1/2" x 5 1/2" Trim Collar 2 2" Wide x 1 1/2" x 2" Angle Bracket 4 MATERIALS NEEDED INSTALLATION GUIDE #14 x
More informationTIMBERMATE. Non-acrylic Water-based Woodfiller NON CRACKING NON SHRINKING UNLIMITED SHELF LIFE. Wood Putty. EdgeFiller.
TIMBERMATE - Water-Based Woodfiller TIMBERMATE Non-acrylic Water-based Woodfiller Wood Putty GrainFiller EdgeFiller CrackFiller A U S T R A L I A N M A D E A U S T R A L I A N O W N E D UNLIMITED SHELF
More informationTIMBERMATE. Non-acrylic Water-based Woodfiller NON CRACKING NON SHRINKING UNLIMITED SHELF LIFE. Wood Putty. GrainFiller. EdgeFiller.
TIMBERMATE - Water-Based Woodfiller TIMBERMATE Non-acrylic Water-based Woodfiller Wood Putty GrainFiller EdgeFiller CrackFiller A U S T R A L I A N M A D E A U S T R A L I A N O W N E D UNLIMITED SHELF
More informationVersai Evolution of Versatile Fencing
Versai Evolution of Versatile Fencing About Versai Ornamental Fencing Versai Ornamental Fencing Versai Ornamental Fencing by Fortress is the next generation in ornamental fencing. It offers a solution
More informationFasteners. Metal Fasteners, Joining, and Adhesives. Bolts. Metal Fasteners, Joining, and Adhesives
Metal Fasteners, Joining, and Adhesives Fasteners Metal assemblies are often held together with fasteners, hardware devices that mechanically join or affix two or more objects together. Assembling with
More informationBRUSH APPLICATION INSTRUCTIONS
QUALITY MARINE EQUIPMENT SINCE 1981 Antifouling Paint For Metal Under The Waterline BRUSH APPLICATION INSTRUCTIONS www.antifoulingpaint.net TABLE OF CONTENTS Humidity & Drying Metal Surfaces... 1 Coverage
More informationHOW TO SELECT & USE A ROLLER
HOW TO SELECT & USE A ROLLER www.paintaids.co.nz 1 select the right roller The two most important things for a great paint finish are: a good quality paint, and the right roller sleeve to match the paint
More informationQuality Marine Equipment Since Antifouling Paint For Metal Under The Waterline SPRAY. Application Instructions.
Quality Marine Equipment Since 1981 Antifouling Paint For Metal Under The Waterline SPRAY Application Instructions www.antifoulingpaint.net Thank you for selecting Velox Plus Antifouling Paint to protect
More informationITB-48 - Industrial Tool Box (48") 2 x Gas Struts
ITB-48 - Industrial Tool Box (48") 2 x Gas Struts (1220 x 615 x 720mm) Ex GST Inc GST $400.00 $440.00 ORDER CODE: MODEL: Material Thickness (mm): Gas Struts (No.): Box Dimensions (L x D x H) (mm): Nett
More informationSplitcase - firefighting Pump
APPLICATION REPORT Splitcase - firefighting Pump Application: Place: Rebuilding and protection of Splitcase firefighting Pump Assens Shipyard - Workshop Date: September 2007 Job and report done by: Wencon
More informationWHAT S ON THE MARKET?
Smart Shopping for Home Furnishings Selecting Paint Dr. Leona Hawks Home Furnishings & Housing Specialist 1987 HI 13 Shopping for paint? When shopping for paint, you will find many different kinds. Some
More informationNanton Grain Mill Assembly
( 1 ) Nanton Grain Mill Assembly Locate package for assembling storage building. These are cut from 1/8 masonite. Inspect and lightly sand edges where it will be bonded. Use white glue or CA glue to bond.
More informationInstalling 3M DI-NOC Architectural Finishes on Doors
Installation Guide Revision C, September 2017 Introduction The purpose of this installation guide is to establish a 3M-recommended procedure for installing 3M DI-NOC Architectural Finishes (the Product
More informationYou expect to find PVC. PVC Lumber PROS & CONS OF PVC PROS
PROS & CONS OF PVC PROS Won t rot. Doesn t have to be painted (but can be). No defects; consistent. Easy to cut and machine. Readily available. CONS Not designed for structural use. Plastic appearance
More informationIndustrial and Transportation Business DISTRIBUTOR PRODUCT LINE
Industrial and Transportation Business DISTRIBUTOR PRODUCT LINE 3900 DUCT TAPE 3900 DUCT TAPE MRO (Maintenance and Repair) Construction Trade Shows and Conventions General Industrial Electrical Aerospace
More informationFurniture Adhesives.
Furniture Adhesives www.romaplastik.com Roma Plant, Gebze/Turkey ROMA HISTORY AND ROMA TODAY Founded in 1996, Roma Plastik is the world s 3 rd largest edging manufacturer and the market leader in Turkey,
More informationEpoxy Coal Tar. Protects Steel and Concrete in Marine and Industrial Environments.
Epoxy Coal Tar Protects Steel and Concrete in Marine and Industrial Environments. General Epoxy Coal Tar is a protective coating designed to resist chemical attack and rigorous weather conditions by combining
More informationWTC Industrial Mobile Tooling Cabinet Workstation
WTC-1450 - Industrial Mobile Tooling Cabinet Workstation 1170 x 580 x 1450mm 100kg per Drawer Ex GST Inc GST $1,050.00 $1,155.00 ORDER CODE: MODEL: T773 WTC-1450 Number of Drawers (No.): 5 Drawer Load
More informationProduct Information PRIMA D839 2 Component Primer
GLOBAL REFINISH SYSTEM March 2011 Product Information PRIMA 2 Component Primer PRODUCT DESCRIPTION Prima is a grey 2K primer surfacer, suitable for a wide range of day-to-day repair work. Versatile, quick
More informationSECTION SITE FURNISHINGS FOR CFCRT. 1. American Society for Testing and Materials (ASTM).
PART 1 - GENERAL 1.1 SECTION INCLUDES A. Benches. B. Trash receptacles. C. Bike storage. 1.2 REFERENCE STANDARDS A. Including but not limited to: 1. American Society for Testing and Materials (ASTM). 1.3
More informationMarking Tools That Work
Marking Tools That Work SAKURA OF AMERICA 800.776.6257 www.sakuraofamerica.com PREVENT GRAFFITI!! Retailers are cautioned to be aware of State and local laws which restrict the sale of this product and
More informationPlexidor Pet Door Wall Kit Instruction for All Sizes Plexidor : S, M, L, XL; BiteGuard KennelPlex TM 1113,1418, 1419 & 1825 and Plexidor Electronic LG
Plexidor Pet Door Wall Kit Instruction for All Sizes Plexidor : S, M, L, XL; BiteGuard KennelPlex TM 1113,1418, 1419 & 1825 and Plexidor Electronic LG Congratulations on your purchase of the Plexidor Pet
More informationCreative & Research USER CODE # JCM! Copyright PO BOX 557 New Albany, IN USA Page 2
Creative & Research USER CODE # JCM!234323300988787 Copyright 2002-2004 PO BOX 557 New Albany, IN. 47151 USA JC-M1 Screen Printing Press Close up of Part # 31 Page 1 Creative & Research USER CODE # JCM!234323300988787
More informationUnion County Vocational - Technical Schools Scotch Plains, New Jersey
SECTION 099123 - INTERIOR PAINTING PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification
More informationSSB-18WS - Stainless Steel Work Bench
SSB-18WS - Stainless Steel Work Bench 1800 x 700 x 900mm Ex GST Inc GST $430.00 $473.00 ORDER CODE: MODEL: Type: Table Top Load Capacity (kg): Number of Drawers (No.): Table Dimensions (L x W x H) (mm):
More informationPREMIUM CONCRETE COUNTERTOP MIX INSTALLATION INSTRUCTIONS
PREMIUM CONCRETE COUNTERTOP MIX INSTALLATION INSTRUCTIONS High Strength Fast Setting Pourable Helpful Items: TCC Materials February 09 Version 2.0 Tools Required: Concrete mixer or ½ drill (600 RPM or
More informationRetrofit Apron Front Farm Sink With Dual Mount Capability Installation Instructions
For Under-Mount Installation please refer to page 14 FOR EXPERIENCED AND PROFESSIONAL INSTALLATION ONLY This installation project is designed for an advanced skill level. Disclaimer: Undermount Application
More informationMakrolon Solid Polycarbonate Sheets
1. General remarks Tools sheets can be machined using the standard tools commonly used for metal and woodworking. We recommend carbide-tipped tools. Above all, it is important to use sharp cutting tools
More informationInstallation Guidelines for all Quaker products with nail fins New Construction nail fin installation with a Zip sheathing system.
www.quakerwindows.com www.quakercommercialwindows.com PO Box 128 504 Highway 63 South Freeburg, MO 65035 800-347-0438 573-469-4151 (fax) Installation Guidelines for all Quaker products with nail fins New
More informationBSC Industrial Storage Cabinet
BSC-900 - Industrial Storage Cabinet 900 x 450 x 900mm 150kg Shelf Load Capacity Ex GST Inc GST $320.00 $368.00 ORDER CODE: MODEL: Shelf Load Capacity (kg): Drawer Load Capacity (kg): Dimensions (L x W
More informationSalter Industries Spiral Stair
Salter Industries Spiral Stair The Leader in Spiral Staircases Continuous Sleeve Stair Installation Instructions TOOLS NEEDED: 1. Electric drill with hex chuck and Phillips bit 2. Drill bits 1/8", 1/4",
More informationTechnical Data Sheet ACRYLIC FILLER 4:1 Acrylic filler with anti-corrosion additives RELATED PRODUCTS. Acrylic and polyurethane thinner
Acrylic filler with anti-corrosion additives RELATED PRODUCTS Acrylic filler hardener Acrylic and polyurethane thinner PROPERTIES A product designed and dedicated for renovation of classic cars Universal
More informationIntroduction to Manufacturing Processes
Introduction to Manufacturing Processes Products and Manufacturing Product Creation Cycle Design Material Selection Process Selection Manufacture Inspection Feedback Typical product cost breakdown Manufacturing
More informationTENANT IMPROVEMENT 16 FEBRUARY WEST 27TH STREET, 4TH FLOOR 100% CD OWNER/BID ADD 1-03/08/2018
SECTION 055000 - PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections, apply
More informationHow to build a Javelin Skiff
How to build a Javelin Skiff This is not your grandfather s plywood boat! The Javelin involves a high-tech type construction, called composite. The hull can be constructed with foam or plywood; these materials
More informationinstallation manual m y w a l l a r t. c o m
installation manual Step 1 Step 2 Acclimate panels for 48 hours in the environment and temperature they will be installed in. Step 3 Install over relatively smooth flat surfaces, all major holes or major
More informationMasking: Each mirrored sheet is well protected by a durable paint backing and
STORAGE Horizontal storage: If mirror sheets are stored flat, care must be taken to avoid warping, slipping and scratching. If different sizes are stored together the largest panels should at the bottom
More informationWEAR SAFETY GLASSES WHEN INSTALLING THIS KIT.
INSTALLATION INSTRUCTIONS Trans4mer Mounting Systems Part No. 29753 (black) Part No. 65654 (stainless) for full size GM pickups, and Blazer, Yukon, Suburban, Tahoe As you read these instructions, you will
More informationHydraulic Drive / support Bearings for Jack Up
APPLICATION REPORT Hydraulic Drive / support Bearings for Jack Up Application: Casting of foundation contact surface - hydraulic Drive / support Bearings Place: Frederikshavn, Denmark Date: September 2014
More informationINSTRUCTIONS FOR USING ITW PHILADELPHIA RESINS 1500LFH
INSTRUCTIONS FOR USING ITW PHILADELPHIA RESINS 1500LFH --- Super Alloy Black 1500LFH is a liquid, injectable low friction material. The objective of these instructions is to allow the exact casting of
More informationTechnical Data February, 2016
Technical Data February, 2016 Product Description 3M DP-600 is a non-sag, grey, rapid setting, two-component polyurethane. It is packaged as 1:1 ratio liquids in a duo-pak cartridge. With the squeeze of
More informationCardboard Model Buildings
Cardboard Model Buildings Get more model kits from http://www.modelbuildings.org PRINTING & ASSEMBLY TIPS: These OO designs can easily be resized by reducing the print percentage as follows: OO scale is
More information2007 Final Summary of the bed wood finishes testing
2007 Final Summary of the bed wood finishes testing In the Summer of 2005 we began a test of 10 different wood finishes. The purpose was to get comparative test results of how well the finishes would last
More informationBuilding the Bell Tower
Building the Bell Tower Mold #55 does not contain all of the blocks to build this tower. You will need extra regular blocks (1/2" x 1/2" x 1") and square blocks (1/2" x 1/2" x 1/2"). These blocks can be
More informationKent Metal Products Vanguard Road Richmond, British Columbia, Canada. V6X 2P KentMetalProducts.com
Kent Metal Products Formed Sheet Metal Channels Formed Stairs made from Aluminum Plate Formed & Welded Screens Formed & Welded Pipe Guards Crated Glass Frames for Export to USA Bike Racks Cut, Formed &
More information(H) PAINTING LIST OF BUREAU OF INDIAN STANDARD CODE OF PRACTICE (ISI)
(H) PAINTING LIST OF BUREAU OF INDIAN STANDARD CODE OF PRACTICE (ISI) 6278 : Code of Practice for white washing and colour washing. 2932 : Enamel and synthetic, exterior (a) Undercoating (b) Finsihing.
More informationPART MATERIALS. Section Fencing Materials. Description
PART 03000 - MATERIALS Section 03010 - Fencing Materials Description 03010.00 Scope - This section consists of the test requirements, specifications and tolerances for barbed wire, woven wire and chain
More informationMUNDUS Premium and Comfort PT30. Overpanel Patch fittings. Installation instructions
MUNDUS Premium and Comfort PT30 Overpanel Patch fittings Installation instructions 942002 10-2017 EN Table of Contents Table of contents 1 Technical specifications 3 1.1 Overview 3 1.1.1 General information
More informationD. Thermally Sprayed Metallic Coating (Flame Spray): STD SPEC
STANDARD SPECIFICATION SECTION 05121 MISCELLANEOUS METALWORK PART 1 - GENERAL 1.01 DESCRIPTION This section includes materials, fabrication, and installation of structural steel, connecting bolts, pipes,
More informationSeawater / CW pipes leaking
APPLICATION REPORT Seawater / CW pipes leaking Application: Place: Seawater / CW pipes leaking Denmark Date: May 2014 Job and report done by: Wencon materials used: Assens Skibsværft, Assens, DK and Wencon
More informationFinishes and Finishing Techniques
Finishes and Finishing Techniques TED 126 Spring 2007 Review pages 147-150, 284-294 Finishes and finishing techniques The finishing process to choose depends partly on the type of wood and the appearance
More informationSHELDON Versatile seating
UK street furniture designers & manufacturers As UK based, designers and manufacturers, Street Design can manufacture and supply Sheldon seating to suit your specific requirements. Sheldon versatile seating
More informationHow to use a Touch Up Bottle & Brush
How to use a Touch Up Bottle & Brush Tech Tips General Definitions Base Color (Basecoat): A color coat requiring a clear coat. Base Color provides color and appearance, while the clear coat provides gloss
More informationMARINE CATALOG. Quality Crafted Rubber Parts & Weatherstripping
2018 MARINE CATALOG Quality Crafted Rubber Parts & Weatherstripping HATCH SEALS CABIN DOOR SEALS LIVEWELL SEALS INSERT TRIM RUBBER EDGING PEEL-N-STICK RUBBER WINDSHIELD TRIM RUBBER Table Of Contents MARINE
More informationA. Section includes surface preparation and the application of paint systems on exterior substrates.
SECTION 09 91 13 - EXTERIOR PAINTING PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification
More informationIWB-40 - Industrial Work Bench
IWB-40 - Industrial Work Bench 1800 x 750 x 900mm 1000kg Load Capacity On Sale Ex GST Inc GST $398.00 $343.48 $457.70 $395.00 ORDER CODE: A420 MODEL: Type: IWB-40 Steel with Laminated Top Table Top Load
More informationWorldwide repairs carried out with PolymerMetal
REP-# 019 A worn out bearing bush of a floating dredger was rebuilt using MM-metal SS-steelceramic and Hardener yellow. Besides MM-metal SS-steel liquid type with Hardener yellow liquid was injected into
More informationProcesses Advantages Disadvantages Identifying features Products
Plastics Processes Plastics manufacturing processes are mostly mass production processes with high volumes of output. The high cost of machinery and tooling is offset by the speed and volume of production.
More informationContent. Hot-dip galvanized narrow strip. Areas of application. Product information
Steel Hot-dip galvanized narrow strip Product information Issue: October 2016, version 0 Areas of application Hot-dip galvanized narrow strip from thyssenkrupp combines the advantages of batch galvanizing
More informationPainting Pitched Roofs
4 Tutorial 4 Painting Pitched Roofs Tile & Galvanized Iron Paint Academy Determining your product requirement: Measure area to which paint is to be applied. Depending on surface to which the product is
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS Trans4mer Grille Guard/Winch Mount Kit 63470 For Ford 4x4 F150, F250 Light Duty & Expedition As you read these instructions, you will see NOTES, CAUTIONS and WARNINGS. Each message
More informationMANUFACTURING AND SPECIFICATIONS OF PREFABRICATED OF FERROCEMENT DOORS
MANUFACTURING AND SPECIFICATIONS OF PREFABRICATED OF FERROCEMENT DOORS Tency Baetens Auroville Building Centre (AVBC) Auroville 605 101 India A ferrocement door is easy to manufacture, the prefabricated
More informationBLADE REPAIR INSTRUCTION BOOKLET
BLADE REPAIR INSTRUCTION BOOKLET Contents Section I: Section II: Section III: Section IV: Section V: Section VI: Removing a Blade Refer to this section if you need to remove the blade from an oar shaft.
More informationScored Gear shaft APPLICATION REPORT. Application: Scored Gear shaft. Place: Frederikshavn, Denmark. Date: January Job and report done by:
APPLICATION REPORT Scored Gear shaft Application: Place: Scored Gear shaft Frederikshavn, Denmark Date: January 2009 Job and report done by: Wencon products used: Wencon technical Supervisor Hi-Temp, Putty,
More informationA. Extent of structural precast concrete work is shown on drawings and in schedules.
SECTION 03 41 00 - STRUCTURAL PRECAST CONCRETE PART 1 GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of Contract, including General and Supplementary Conditions and Division 1 specification
More informationSection 914. JOINT AND WATERPROOFING MATERIALS
914.01 Section 914. JOINT AND WATERPROOFING MATERIALS 914.01. General Requirements. Joint and waterproofing material for use in concrete construction must meet the requirements of this section. 914.02.
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS Brush Guard Kit Kit no. 67730 (black), 67731 (stainless) for GMC Trucks Your safety, and the safety of others, is very important. To help you make informed decisions about safety,
More information3/16 OR 1/4 FRAMELESS SWING DOOR WITH SINGLE INLINE PANEL OR TWO INLINE PANELS
/ OR / FRAMELESS SWING DOOR WITH SINGLE INLINE OR TWO INLINE S This instruction sheet applies to the following units with a magnetic handle. C7, C7, C79 This instruction sheet also applies to the following
More informationMODEL T /2-TON ARBOR PRESS INSTRUCTIONS
MODEL T27033 1/2-TON ARBOR PRESS INSTRUCTIONS For questions or help with this product contact Tech Support at (570) 546-9663 or techsupport@grizzly.com Introduction This arbor press is designed to perform
More informationWritten by Administrator Monday, 29 November :54 - Last Updated Thursday, 02 December :00
Security Screen Doors One of the most important decisions you will make in acquiring your door will the selection of the finish for your door. Two similar doors will seem very different depending on the
More informationNew Product Update & Parts Information
Update & Parts NEW Range Liquid Accessories Range Vapormatic is pleased to introduce a new liquid accessories range to replace existing s. The NEW range is manufactured in the UK, to ISO 9001 standard.
More informationSECTION STRUCTURAL STEEL FRAMING PART 1 - GENERAL 1.1 RELATED DOCUMENTS
SECTION 05 12 00 - STRUCTURAL STEEL FRAMING PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification
More informationB. Shop Drawings: Include elevations, door edge details, frame profiles, metal thicknesses, preparations for hardware, and other details.
SECTION 081113 - HOLLOW METAL DOORS AND FRAMES PART 1 - GENERAL 1.1 SUMMARY A. Section Includes: 1. Standard hollow metal doors and frames. 1.2 SUBMITTALS A. Product Data: For each type of product indicated.
More informationDRILL BITS & THREAD REPAIR DRILL BITS
DRILL BITS DRILL BITS Designed for drilling soft metal mild steel wood plastic and PVC Manufactured from industrial high speed steel surface treated for high performance and long life 29 piece set includes
More informationMake every component count.
Make every component count. Technical Bulletin Installation Instructions ABOUT THE MATERIAL The frame and material have been thoroughly tested for strength, durability and low maintenance, offering a never
More informationAluminum Crack Repair. Without Welding
Aluminum Crack Repair Without Welding Topics Crack detection/inspection Metal stitching Threaded hole repair Crack Detection Visual Pressure testing Dye-penetrant Visual Practiced by many as the only way
More informationBallast pipe system, leaking
APPLICATION REPORT Ballast pipe system, leaking Application: Place: Repair of approx. 50 leaks on ballast system Offshore, Congo Africa Date: November 2005 Job and report done by: Wencon products used:
More informationCold curing adhesive K-X280
Instructions for use English Cold curing adhesive K-X280 A4048-1.0 en English 1 Safety instructions... 3 2 General information... 3 2.1 Scope of delivery for K-X280... 3 2.2 Accessories required for installation...
More informationInstructions for Installing Vinyl Stair Treads with Musson 3 Wide Double-Face Tape
Instructions for Installing Vinyl Stair Treads with Musson 3 Wide Double-Face Tape (For No. 300 & No. 334 treads see special note in the Installation of Vinyl Stair Tread section below) Where To Install
More information