Features OBSOLETE. Saturated Output Power (Psat) dbm Output Third Order Intercept (IP3) dbm Supply Current (Idd) ma
|
|
- Christine Heath
- 5 years ago
- Views:
Transcription
1 7 Typical Applications The HMC667LP2(E) is ideal for: WiMAX, WiBro & Fixed Wireless SDARS & WLAN Receivers Infrastructure & Repeaters Access Points Telematics & DMB Functional Diagram v2.11 Electrical Specifications, T A = +2 C Parameter Vdd = +3 Vdc Features Low Noise Figure:.7 db High : 19 db High Output IP3: +29. dbm Single Supply: +3V to +V 6 Lead 2x2mm DFN Package: 4 mm 2 General Description The HMC667LP2(E) is a GaAs PHEMT MMIC Low Noise Amplifi er that is ideal for WiMAX, WLAN and fi xed wireless receivers operating between 23 and 27 MHz. This self-biased LNA has been optimized to provide.7 db noise fi gure, 19 db gain and +29. dbm output IP3 from a single supply of +V. Input and output return losses are excellent and the LNA requires minimal external matching and bias decoupling components. The HMC667LP2(E) can also operate from a +3V supply for lower power applications. Vdd = + Vdc Min. Typ. Max. Min. Typ. Max. Frequency Range MHz db Variation Over Temperature.1.1 db/ C Noise Figure db Input Return Loss db Output Return Loss 1 db Output Power for 1 db Compression (P1dB) dbm Saturated Output Power (Psat). 17 dbm Output Third Order Intercept (IP3) 29. dbm Supply Current (Idd) ma Units 7-1 For price, delivery and to place orders: Hittite Microwave Corporation, For price, delivery, Alpha and Road, to place Chelmsford, orders: Analog MA Devices, Inc., One Technology Way, P.O. Box 96, Norwood, MA Phone: Fax: Order Phone: On-line at Application Support: Phone: Application or apps@hittite.com Support: Phone: 1-8-ANALOG-D
2 Broadband & Return Loss RESPONSE (db) v S11 S S21 Input Return Loss vs. Temperature [1] Output Return Loss vs. Temperature [1] RETURN LOSS (db) C - Reverse Isolation vs. Temperature [1] ISOLATION (db) vs. Temperature GAIN (db) RETURN LOSS (db) C -4C - P1dB vs. Temperature -4C P1dB (dbm) 8-4C 6 7 [1] Vdd = V For price, delivery and to place orders: Hittite Microwave Corporation, For price, delivery, Alpha and Road, to place Chelmsford, orders: Analog MA Devices, Inc., One Technology Way, P.O. Box 96, Norwood, MA Phone: Fax: Order Phone: On-line at Application Support: Phone: Application or apps@hittite.com Support: Phone: 1-8-ANALOG-D 7-2
3 7 Noise Figure vs. Temperature [1] NOISE FIGURE (db) Output IP3 and Idd vs. Supply 23 MHz IP3 (db) v Voltage Supply (V) IP3 (dbm) C.2 Output IP3 vs. Temperature C Idd (ma) Psat vs. Temperature Psat (dbm) Output IP3 and Idd vs. Supply 2 MHz IP3 (db) 8 6-4C Voltage Supply (V) Idd (ma) [1] Measurement reference plane shown on evaluation PCB drawing. 7-3 For price, delivery and to place orders: Hittite Microwave Corporation, For price, delivery, Alpha and Road, to place Chelmsford, orders: Analog MA Devices, Inc., One Technology Way, P.O. Box 96, Norwood, MA Phone: Fax: Order Phone: On-line at Application Support: Phone: Application or apps@hittite.com Support: Phone: 1-8-ANALOG-D
4 v2.11 Output Power, & 2 MHz [1] Output Power, & 23 MHz [1] Output Power, & 23 MHz [2] Pout (dbm), (db), PAE (%) Pout (dbm), (db), PAE (%) INPUT POWER (dbm) 2 1 Pout PAE INPUT POWER (dbm) P1dB,, & Noise Figure vs. Supply 23 MHz (db) & P1dB (dbm) NF Pout PAE Pout (dbm), (db), PAE (%) Output Power, & 2 MHz [2] Pout (dbm), (db), PAE (%) INPUT POWER (dbm) 2 1 Pout PAE Pout PAE INPUT POWER (dbm) P1dB,, & Noise Figure vs. Supply 2 MHz P1dB NOISE FIGURE (db) (db) & P1dB (dbm) NF P1dB NOISE FIGURE (db) Voltage Supply (V) Voltage Supply (V) [1] Vdd = V [2] Vdd = 3V For price, delivery and to place orders: Hittite Microwave Corporation, For price, delivery, Alpha and Road, to place Chelmsford, orders: Analog MA Devices, Inc., One Technology Way, P.O. Box 96, Norwood, MA Phone: Fax: Order Phone: On-line at Application Support: Phone: Application or apps@hittite.com Support: Phone: 1-8-ANALOG-D 7-4
5 7 Absolute Maximum Ratings Drain Bias Voltage (Vdd) RF Input Power (RFIN) +6 Vdc + dbm Channel Temperature 1 C Continuous Pdiss (T= 8 C) (derate.88 mw/ C above 8 C) Thermal Resistance (Channel to Ground Paddle).38 W 17 C/W v2.11 & Return Loss w/ SDARS Tune [1] RESPONSE (db) S11 S S Storage Temperature -6 to +1 C Operating Temperature -4 to +8 C ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS Noise Figure vs. Vdd w/ SDARS Tune [2] NOISE FIGURE (db) [1] Vdd = V [2] Measurement reference plane shown on evaluation PCB drawing. 7 - For price, delivery and to place orders: Hittite Microwave Corporation, For price, delivery, Alpha and Road, to place Chelmsford, orders: Analog MA Devices, Inc., One Technology Way, P.O. Box 96, Norwood, MA Phone: Fax: Order Phone: On-line at Application Support: Phone: Application or apps@hittite.com Support: Phone: 1-8-ANALOG-D
6 Outline Drawing v Package Information Part Number Package Body Material Lead Finish MSL Rating Package Marking [3] [1] 667 HMC667LP2 Low Stress Injection Molded Plastic Sn/Pb Solder MSL1 XXX [2] 667 HMC667LP2E RoHS-compliant Low Stress Injection Molded Plastic % matte Sn MSL1 XXX [1] Max peak refl ow temperature of 23 C [2] Max peak refl ow temperature of 26 C [3] 3-Digit lot number XXX NOTES: 1. LEADFRAME MATERIAL: COPPER ALLOY 2. DIMENSIONS ARE IN INCHES [MILLIMETERS] 3. LEAD SPACING TOLERANCE IS NON-CUMULATIVE. 4. PAD BURR LENGTH SHALL BE.1mm MAXIMUM. PAD BURR HEIGHT SHALL BE.mm MAXIMUM.. PACKAGE WARP SHALL NOT EXCEED.mm. 6. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED TO PCB RF GROUND. 7. REFER TO HITTITE APPLICATION NOTE FOR SUGGESTED LAND PATTERN. For price, delivery and to place orders: Hittite Microwave Corporation, For price, delivery, Alpha and Road, to place Chelmsford, orders: Analog MA Devices, Inc., One Technology Way, P.O. Box 96, Norwood, MA Phone: Fax: Order Phone: On-line at Application Support: Phone: Application or apps@hittite.com Support: Phone: 1-8-ANALOG-D 7-6
7 7 Pin Descriptions v2.11 Pin Number Function Description Interface Schematic 1, 2, GND 3 RFIN 4 RFOUT 6 Vdd Components for Selected Band These pins and package bottom must be connected to RF/DC ground. This pin is DC coupled See the application circuit for off-chip components This pin is AC coupled and matched to Ohms. Power supply voltage. Bypass capacitors are required. See application circuit. Components C1 L1 Evaluation PCB Number Broadband 2.7 pf 2. nh 91 SDARS 2.2 pf 4.3 nh For price, delivery and to place orders: Hittite Microwave Corporation, For price, delivery, Alpha and Road, to place Chelmsford, orders: Analog MA Devices, Inc., One Technology Way, P.O. Box 96, Norwood, MA Phone: Fax: Order Phone: On-line at Application Support: Phone: Application or apps@hittite.com Support: Phone: 1-8-ANALOG-D
8 Evaluation PCB v List of Materials for Evaluation PCB [1] J1 - J2 J3 - J4 C1 C2 C3 C4 L1 U1 PCB [2] Item Description PCB Mount SMA Connector DC Pin 2.7 pf Capacitor, 42 Pkg. pf Capacitor, 42 Pkg. nf Capacitor, 63 Pkg. 2.2 μf Capacitor, CASE-A Tantalum 2 nh Inductor, 42 Pkg. HMC667LP2(E) Amplifi er 1173 Evaluation PCB [1] When requesting an evaluation board, please reference the appropriate evaluation PCB number listed in the table Components for Selected Band on previous page [2] Circuit Board Material: Rogers 43 The circuit board used in this application should use RF circuit design techniques. Signal lines should have Ohm impedance while the package ground leads and exposed paddle should be connected directly to the ground plane similar to that shown. A sufficient number of via holes should be used to connect the top and bottom ground planes. The evaluation board should be mounted to an appropriate heat sink. The evaluation circuit board shown is available from Hittite upon request. For price, delivery and to place orders: Hittite Microwave Corporation, For price, delivery, Alpha and Road, to place Chelmsford, orders: Analog MA Devices, Inc., One Technology Way, P.O. Box 96, Norwood, MA Phone: Fax: Order Phone: On-line at Application Support: Phone: Application or apps@hittite.com Support: Phone: 1-8-ANALOG-D 7-8
HMC486LP5 / 486LP5E LINEAR & POWER AMPLIFIERS - SMT. SURFACE MOUNT PHEMT 2 WATT POWER AMPLIFIER, 7-9 GHz. Typical Applications.
v2. Typical Applications The HMC486LP5(E) is ideal for: Point-to-Point Radios Point-to-Multi-Point Radios Test Equipment and Sensors Military End-Use Features Saturated Power: +33 dbm @ 2% PAE Output IP3:
More informationFeatures. = +25 C, Vs = +5V. Parameter Min. Typ. Max. Min. Typ. Max. Units Frequency Range MHz Gain
Typical Applications Functional Diagram The HMC32LP3 / HMC32LP3E is ideal for basestation receivers: GSM, GPRS & EDGE CDMA & W-CDMA Private Land Mobile Radio HMC32LP3 / 32LP3E AMPLIFIER, 00-1000 MHz Features
More informationHMC694LP4 / 694LP4E. Variable gain amplifiers - ANALOG - smt. GaAs MMIC ANALOG VARIABLE GAIN AMPLIFIER, 6-17 GHz. Typical Applications
v2.1 Typical Applications The HMC694LP4(E) is ideal for: Point-to-Point Radio Point-to-Multi-Point Radio EW & ECM X-Band Radar Test Equipment Features Wide Gain Control Range: 23 db Single Control Voltage
More informationFeatures. = +25 C, Vdd = +5V, Rbias = 10 Ohms*
Typical Applications Functional Diagram The HMC36LP3 / HMC36LP3E is ideal for: Cellular/3G Infrastructure Base Stations & Repeaters CDMA, W-CDMA, & TD-SCDMA Private Land Mobile Radio GSM/GPRS & EDGE UHF
More informationFeatures OBSOLETE. = +25 C, Rbias = 0 Ohm. Bypass Mode Failsafe Mode Parameter
7 Typical Applications The HMC668LP3(E) is ideal for: Cellular/3G and LTE/WiMAX/4G BTS & Infrastructure Repeaters and Femtocells Tower Mounted Amplifiers Test & Measurement Equipment Functional Diagram
More informationHMC618ALP3E AMPLIFIERS - LOW NOISE - SMT. GaAs SMT phemt LOW NOISE AMPLIFIER, GHz. Typical Applications. Features. Functional Diagram
7 Typical Applications The is ideal for: Cellular/3G and LTE/WiMAX/4G BTS & Infrastructure Repeaters and Femto Cells Public Safety Radios Functional Diagram v. Electrical Specifications T A = + C, Rbias
More informationFeatures. = +25 C, Vdd = +7V, Idd = 1340 ma [1]
Typical Applications The HMC591LP5 / HMC591LP5E is ideal for use as a power amplifi er for: Point-to-Point Radios Point-to-Multi-Point Radios Test Equipment & Sensors Military End-Use Space Features Saturated
More informationFeatures. = +25 C, Vdd= 5V. Parameter Min. Typ. Max. Min. Typ. Max. Min. Typ. Max. Units. Frequency Range GHz
Typical Applications The HMC62LP / HMC62LPE Wideband LNA is ideal for: Telecom Infrastructure Microwave Radio & VSAT Military EW, ECM & C 3 I Test Instrumentation Fiber Optics Functional Diagram Features
More informationFeatures. = +25 C, Vdd1 = Vdd2 = +3.5V, Idd = 80 ma [2]
Typical Applications This is ideal for: Features Low Noise Figure: 1.8 db Point-to-Point Radios Point-to-Multi-Point Radios Military & Space Test Instrumentation Functional Diagram High Gain: 19 db High
More informationAnalog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED
Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED www.analog.com www.hittite.com THIS PAGE INTENTIONALLY LEFT BLANK v2.65 HMC455LP3 / 455LP3E Typical
More informationAnalog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED
Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED www.analog.com www.hittite.com THIS PAGE INTENTIONALLY LEFT BLANK v3.38 POWER AMPLIFIER, 2-2 GHz Typical
More informationGain Control Range db
v1.112-12 GHz Typical Applications The is ideal for: Point-to-Point Radio Point-to-Multi-Point Radio EW & ECM Subsystems X-Band Radar Test Equipment & Sensors Functional Diagram Features Wide Gain Control
More informationHMC1040LP3CE. Amplifiers - Low Noise - smt. GaAs phemt MMIC LOW NOISE AMPLIFIER, GHz. Features. Typical Applications. General Description
v.112 HMC14LP3CE AMPLIFIER, 24-43. GHz Typical Applications This HMC14LP3BE is ideal for: Point-to-Point Radios Test Instrumentation SatCom Transponders & VSAT Industrial Sensors EW & ECM Subsystems Functional
More informationParameter Min. Typ. Max. Units Frequency Range GHz
v.312 27-31. GHz Typical Applications The is ideal for: Point-to-Point Radio Point-to-Multi-Point Radio EW & ECM Subsystems Ka-Band Radar & VSAT Test Equipment Functional Diagram Features Wide Gain Control
More informationSURFACE MOUNT PHEMT 2 WATT POWER AMPLIFIER,
v2.617 AMPLIFIER, - 12 GHz Typical Applications The is ideal for use as a power amplifier for: Point-to-Point Radios Point-to-Multi-Point Radios Test Equipment and Sensors Military End-Use Features Saturated
More informationOBSOLETE HMC915LP4E. GaAs MMIC MIXER w/ INTEGRATED LO AMPLIFIER, GHz. Typical Applications. Features. Functional Diagram. General Description
v1.5 LO AMPLIFIER,.5-2.7 GHz Typical Applications The is ideal for: PCS / 3G Infrastructure Base Stations & Repeaters WiMAX & WiBro ISM & Fixed Wireless Functional Diagram Features Input IP3: +28 dbm Low
More informationFeatures. = +25 C, Vdd = +5V, 5 dbm Drive Level
v1.4 Typical Applications The HMC561LP3E are suitable for: Clock Generation Applications: SONET OC-192 & SDH STM-64 Point-to-Point & VSAT Radios Test Instrumentation Military & Space Functional Diagram
More informationFeatures. = +25 C, Vdd= +3V. Parameter Min. Typ. Max. Units Frequency Range GHz Gain db
7 Typical Applications The HMC286 / HMC286E is ideal for: BlueTooth Home RF 82.11 WLAN Radios PCMCIA Platforms Functional Diagram v3.41 Features 2.4 GHz LNA Noise Figure: 1.7 db Gain: 19 db Single Supply:
More informationFeatures. = +25 C, Vdd= +12V, Vgg2= +5V, Idd= 400 ma*
Typical Applications The HMC637LP5(E) wideband PA is ideal for: Features P1dB Output Power: +29 dbm Telecom Infrastructure Microwave Radio & VSAT Military & Space Test Instrumentation Fiber Optics Functional
More informationHMC368LP4 / 368LP4E FREQ. MULTIPLIERS - ACTIVE - SMT. SMT GaAs PHEMT MMIC AMP-DOUBLER-AMP, 9-16 GHz OUTPUT. Typical Applications.
v3.5 Typical Applications Microwave Radios & VSAT Fiber Optic Infrastructure Military Communications & Radar Functional Diagram Features Output Power: +15 dbm Wide Input Power Range: to +1 dbm 1 khz SSB
More informationAnalog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED
Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED www.analog.com www.hittite.com THIS PAGE INTENTIONALLY LEFT BLANK v.51 HMC32LC Typical Applications
More informationFeatures. = +25 C, Vdd1 = Vdd2 = +3.5V, Idd = 70 ma
v2.61 Typical Applications This is ideal for: Point-to-Point Radios Point-to-Multi-Point Radios Military & Space Test Instrumentation Functional Diagram Features Low Noise Figure: 2.5 db Gain: 13 db P1dB
More informationFeatures. = +25 C, Vdd1 = Vdd2 = +3.5V, Idd = 45 ma
v2.61 Typical Applications This is ideal for: Point-to-Point Radios Point-to-Multi-Point Radios Military & Space Test Instrumentation Functional Diagram Features Low Noise Figure: 2. db High Gain: 22 db
More informationFeatures. = +25 C, Vdd = +5V, Idd = 400mA [1]
v.61 Typical Applications The is ideal for: Point-to-Point Radios Point-to-Multi-Point Radios VSAT Military & Space Features Saturated Output Power:.5 dbm @ 21% PAE High Output IP3: 34.5 dbm High Gain:.5
More informationFeatures. Gain: 14.5 db. Electrical Specifications [1] [2] = +25 C, Rbias = 825 Ohms for Vdd = 5V, Rbias = 5.76k Ohms for Vdd = 3V
Typical Applications The HMC77ALP3E is ideal for: Fixed Wireless and LTE/WiMAX/4G BTS & Infrastructure Repeaters and Femtocells Public Safety Radio Access Points Functional Diagram Features Noise Figure:.
More informationFeatures
HMC37SC7E v1.1.3-3. GHz Typical Applications The HMC37SC7E is ideal for: Cellular/PCS/3G WCS, mmds & ism Fixed Wireless & WLAN Private Land Mobile Radio Functional Diagram Features Single Supply: Vdd =
More informationAnalog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED
Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED www.analog.com www.hittite.com THIS PAGE INTENTIONALLY LEFT BLANK v.51 HMC7LP5E POWER AMPLIFIER,.2
More informationFeatures. = +25 C, Vcc= 5V
v4.21 Typical Applications Active Multiplier for X Band Applications: Fiber Optic Point-to-Point Radios Military Radar Functional Diagram Features Output Power: +4 dbm Sub-Harmonic Suppression: >2 dbc
More informationAnalog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED
Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED www.analog.com www.hittite.com THIS PAGE INTENTIONALLY LEFT BLANK v1.14 AMPLIFIER, 18-4 GHz Typical
More informationFeatures. Parameter Frequency (GHz) Min. Typ. Max. Units GHz GHz GHz. Attenuation Range GHz 15.
v.91.5 db LSB GaAs MMIC 5-BIT DIGITAL ATTENUATOR,.1-33 GHz Typical Applications The HMC941LP4 / HMC941LP4E is ideal for: Fiber Optics & Broadband Telecom Microwave Radio & VSAT Military Radios, Radar &
More informationParameter Frequency (GHz) Min. Typ. Max. Units DC GHz GHz GHz GHz Attenuation Range DC - 5.
5 Typical Applications HMC54LP3 / 54LP3E v.65 1 LSB GaAs MMIC 4-BIT DIGITAL Features The HMC54LP3 / HMC54LP3E is ideal for both RF and IF applications: Cellular Infrastructure ISM, MMDS, WLAN, WiMAX, WiBro
More informationOBSOLETE. Parameter Frequency (GHz) Min. Typ. Max. Units DC GHz GHz GHz Attenuation Range DC - 5.
5 Typical Applications HMC54LP3 / 54LP3E v.65 1 LSB GaAs MMIC 4-BIT DIGITAL Features The HMC54LP3 / HMC54LP3E is ideal for both RF and IF applications: Cellular Infrastructure ISM, MMDS, WLAN, WiMAX, WiBro
More informationFeatures OBSOLETE. = +25 C, as a function of Vdd. Vdd = +3V Vdd = +5V Vdd = +5V Vdd = +5V Parameter
v5.117 HMC3 / 3E GENERAL PURPOSE 1 mw GaAs MMIC AMPLIFIER,. - 3. GHz Typical Applications Broadband or Narrow Band Applications: Cellular/PCS/3G Fixed Wireless & Telematics Cable Modem Termination Systems
More informationOBSOLETE. = +25 C, Vdd = Vs= +5V, Vctl= 0/ +5V. Parameter Frequency Min. Typ. Max. Units DC GHz 37. db Gain (Maximum Gain State)
v.1212.5 db LSB GaAs MMIC 6-BIT DIGITAL Typical Applications The is ideal for: IF & RF Applications Cellular/3G Infrastructure WiBro / WiMAX / 4G Microwave Radio & VSAT Test Equipment and Sensors Functional
More informationOBSOLETE. Parameter Frequency (GHz) Min. Typ. Max. Units DC GHz GHz. Attenuation Range DC - 3 GHz 31 db
5 Typical Applications The HMC47LP3(E) is ideal for: Cellular; UMTS/3G Infrastructure ISM, MMDS, WLAN, WiMAX Microwave Radio & VSAT Test Equipment and Sensors Functional Diagram HMC47LP3 / 47LP3E v4.118
More informationHMC639ST89 / 639ST89E
v3.1 HMC63ST / 63STE AMPLIFIER,.2-4. GHz Typical Applications The HMC63ST(E) is ideal for: Cellular / PCS / 3G WiMAX, WiBro, & Fixed Wireless CATV & Cable Modem Microwave Radio IF and RF Sections Features
More informationHMC948LP3E POWER DETECTORS - SMT. 54 db, LOGARITHMIC DETECTOR, 1-23 GHz. Typical Applications. Features. Functional Diagram. General Description
v.9 HMC948LPE DETECTOR, - GHz Typical Applications The HMC948LPE is ideal for: Point-to-Point Microwave Radio VSAT Wideband Power Monitoring Receiver Signal Strength Indication (RSSI) Test & Measurement
More informationFeatures. = +25 C, Vdd= 8V, Idd= 75 ma*
HMC46LC5 Typical Applications v3.11 AMPLIFIER, DC - 2 GHz Features The HMC46LC5 is ideal for: Noise Figure: 2.5 db @ 1 GHz Telecom Infrastructure Microwave Radio & VSAT Military & Space Test Instrumentation
More informationHMC599ST89 / 599ST89E. Features. The HMC599ST89(E) is ideal for: = +25 C MHz. Gain Variation Over Temperature MHz 0.
HMCST / STE Typical Applications v2.3 GaAs phemt MMIC LNA, Ohm - 1 MHz Features The HMCST(E) is ideal for: High P1 Output Power: +1 m VHF / UHF Antennas HDTV Receivers CMTS Equipment CATV, Cable Modem
More informationFeatures. = +25 C, Vcc = +8V
v2.19 HMC5LP3 / 5LP3E Typical Applications The HMC5LP3(E) is ideal for: Wireless Infrastructure HPA & MCPA Error Correction Pre-Distortion or Feed-Forward Linearization PCS, GSM and W-CDMA Systems Beam
More informationFeatures = +5V. = +25 C, Vdd 1. = Vdd 2
v1.11 HMC51LP3 / 51LP3E POWER AMPLIFIER, 5-1 GHz Typical Applications The HMC51LP3(E) is ideal for: Microwave Radio & VSAT Military & Space Test Equipment & Sensors Fiber Optics LO Driver for HMC Mixers
More informationFeatures. Output Power for 1 db Compression (P1dB) dbm Saturated Output Power (Psat) dbm
v1.314 Typical Applications Features The is ideal for: Test Instrumentation Microwave Radio & VSAT Telecom Infrastructure Military & Space Fiber optics Functional Diagram P1dB Output Power: +27 dbm Psat
More informationOBSOLETE. = +25 C, With Vdd = +5V & Vctl = 0/+5V. Parameter Frequency Min. Typ. Max. Units DC - 4 GHz GHz Attenuation Range DC - 10 GHz 10 db
Typical Applications The HMC8LP3E is ideal for: Test Equipment and Sensors ISM, MMDS, WLAN, WiMAX, WiBro Microwave Radio & VSAT Cellular Infrastructure Functional Diagram HMC8LP3E v.11 1 GaAs MMIC 1-BIT
More informationHMC639ST89 / 639ST89E
Typical Applications The HMC39ST9(E) is ideal for: Cellular / PCS / 3G WiMAX, WiBro, & Fixed Wireless CATV & Cable Modem Microwave Radio IF and RF Sections Functional Diagram Electrical Specifications,
More informationFeatures OBSOLETE. = +25 C, 50 Ohm system, Vdd = +5V. Parameter Frequency Min. Typ. Max. Units GHz
Typical Applications v.91 ATTENUATOR,.5-6. GHz Features The is ideal for: Point-to-Point Radio Cellular/3G & WiMAX/4G Infrastructure Test Instrumentation Microwave Sensors Military, ECM & Radar Functional
More informationHMC478SC70 / 478SC70E v
HMC47SC7 / 47SC7E v2.14 Typical Applications The HMC47SC7(E) is an ideal for: Cellular / PCS / 3G WiBro / WiMAX / 4G Fixed Wireless & WLAN CATV, Cable Modem & DBS Microwave Radio & Test Equipment Functional
More informationAnalog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED
Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED www.analog.com www.hittite.com THIS PAGE INTENTIONALLY LEFT BLANK 5 Typical Applications The HMC472LP4(E)
More information= +25 C, 50 Ohm System, Vdd = +5V
v3.69 HMC68LP4 / 68LP4E VARIABLE GAIN AMPLIFIER, 3-4 MHz Variable gain amplifiers - digital - SMT Typical Applications The HMC68lp4(E) is ideal for: Cellular/3G Infrastructure WiBro / WimaX / 4G Microwave
More informationAnalog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED
Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED www.analog.com www.hittite.com HMC461* Product Page Quick Links Last Content Update: 8/3/216 Comparable
More information= +25 C, Vdd = Vs= P/S= +5V
v3. HMC68LP5 / 68LP5E.5 db LSB GaAs MMIC 6-BIT DIGITAL VARIABLE GAIN AMPLIFIER w/ SERIAL CONTROL, DC - GHz Variable gain amplifiers - digital - SMT Typical Applications The HMC68LP5(E) is ideal for: IF
More informationHMC326MS8G / 326MS8GE
v9.511 AMPLIFIER, 3. - 4.5 GHz Typical Applications The HMC326MS8G / HMC326MS8GE is ideal for: Microwave Radios Broadband Radio Systems Wireless Local Loop Driver Amplifier Functional Diagram Features
More informationHMC471MS8G / 471MS8GE. Features OBSOLETE. DC GHz GHz GHz GHz GHz
v1.65 Typical Applications The HMC471MSG / HMC471MSGE is a dual RF/IF gain block & LO or PA driver: Cellular / PCS / 3G Fixed Wireless & WLAN CATV, Cable Modem & DBS Microwave Radio & Test Equipment Functional
More informationHMC454ST89 / 454ST89E
HMC44ST8 / 44ST8E Typical Applications The HMC44ST8 / HMC44ST8E is ideal for applications requiring a high dynamic range amplifi er: GSM, GPRS & EDGE CDMA & W-CDMA CATV/Cable Modem Fixed Wireless & WLL
More informationHMC589ST89 / 589ST89E. Features OBSOLETE. DC GHz GHz GHz. db Gain 22
v.71 HMC59ST9 / 59ST9E Typical Applications The HMC59ST9 / HMC59ST9E is ideal for: Cellular / PCS / 3G Fixed Wireless & WLAN CATV, Cable Modem & DBS Microwave Radio & Test Equipment IF & RF Applications
More informationHMC997LC4. Variable Gain Amplifier - SMT. VARIABLE GAIN AMPLIFIER GHz. Typical Applications. General Description. Functional Diagram
v2.14 Typical Applications The is ideal for: Point-to-Point Radio Point-to-Multi-Point Radio EW & ECM Subsystems Ka-Band Radar Test Equipment Functional Diagram Features Wide Gain Control Range: 1 db Single
More informationTEL: FAX: v.117 HMC3 / 3E GENERAL PURPOSE 1 mw GaAs MMIC AMPLIFIER, GHz Broadband Gain & Return Vdd =
TEL:7-339622 FAX:7-337612 E-MAIL: szss@3.com v.117 HMC3 / 3E GENERAL PURPOSE 1 mw GaAs MMIC AMPLIFIER,. - 3. GHz Typical Applications Broadband or Narrow Band Applications: Cellular/PCS/3G Fixed Wireless
More informationHMC480ST89 / 480ST89E
v2.7 HMCST9 / ST9E Typical Applications The HMCST9 / HMCST9E is an ideal RF/IF gain block & LO or PA driver for: Cellular / PCS / 3G Fixed Wireless & WLAN CATV, Cable Modem & DBS Microwave Radio & Test
More informationFeatures OBSOLETE. DC GHz GHz GHz GHz GHz
v2.71 HMC75ST9 / 75ST9E Typical Applications The HMC75ST9 / HMC75ST9E is an ideal RF/IF gain block & LO or PA driver: Cellular / PCS / 3G Fixed Wireless & WLAN CATV, Cable Modem & DBS Microwave Radio &
More informationFeatures. Parameter Min Typ. Max Min Typ. Max Min Typ Max Units Frequency Range GHz Gain
Typical Applications The is ideal for: Point-to-Point Radios Point-to-Multi-Point Radios VSAT & SATCOM Marine Radar Military EW & ECM Functional Diagram Features High Saturated Output Power: dbm @ % PAE
More informationParameter Min. Typ. Max. Units
v4.112 Typical Applications The is ideal for: Point-to-Point and Point-to-Multi-Point Radio Military Radar, EW & ELINT Satellite Communications Functional Diagram Features General Description The is a
More informationHMC659LC5 LINEAR & POWER AMPLIFIERS - SMT. GaAs PHEMT MMIC POWER AMPLIFIER, DC - 15 GHz. Features. Typical Applications. General Description
v.61 Typical Applications The wideband PA is ideal for: Telecom Infrastructure Microwave Radio & VSAT Military & Space Test Instrumentation Fiber Optics Functional Diagram Features P1dB Output Power: +27.5
More informationHMC454ST89 / 454ST89E. Features. = +25 C, Vs= +5V [1]
Typical Applications The HMC44ST8 / HMC44ST8E is ideal for applications requiring a high dynamic range amplifi er: GSM, GPRS & EDGE CDMA & W-CDMA CATV/Cable Modem Fixed Wireless & WLL Features Output IP3:
More informationHMC310MS8G / 310MS8GE. Features OBSOLETE. = +25 C, Vdd = +3V
Typical Applications Transmit & Receive Switch for 2. GHz Applications: Bluetooth HomeRF WLAN Radios Functional Diagram v3.67 Electrical Specifications, T A = +25 C, Vdd = +3V HMC31MSG / 31MSGE Features
More informationHMC580ST89 / 580ST89E. Features OBSOLETE. DC GHz GHz GHz. db db db Gain Variation Over Temperature DC GHz 0.
v.71 HMC5ST9 / 5ST9E Typical Applications The HMC5ST9 / HMC5ST9E is ideal forr: Cellular / PCS / 3G Fixed Wireless & WLAN CATV, Cable Modem & DBS Microwave Radio & Test Equipment IF & RF Applications Functional
More informationAnalog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED
Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED www.analog.com www.hittite.com THIS PAGE INTENTIONALLY LEFT BLANK HMC476SC7 / 476SC7E v4.814 Typical
More informationParameter Frequency (GHz) Min. Typ. Max. Units DC GHz GHz GHz Attenuation Range DC GHz 31.5 db
v..5 LSB GaAs MMIC 6-BIT DIGITAL Typical Applications The is ideal for: 3G Infrastructure & access points Cellular/3G, LTE & UMB WiMAX, WiBN & Fixed Wireless Test Equipment and Sensors GSM, WCDMA & TD-SCDMA
More informationHMC695LP4 / HMC695LP4E
v.1 Typical Applications The HMC95LP(E) is ideal for: Fiber Optic Applications Point-to-Point Radios Military Radar Functional Diagram Features Output Power: +7 dbm Sub-Harmonic Suppression: >5 dbc SSB
More informationFeatures. = +25 C, Vcc = +5V. Parameter Min. Typ. Max. Units Fo Fo/2 RFOUT RFOUT/2
v4.11 HMC5LP5 / 5LP5E OUTPUT 7.3 -.2 GHz Typical Applications Low noise MMIC VCO w/half Frequency, for: VSAT Radio Point to Point/Multi-Point Radio Test Equipment & Industrial Controls Military End-Use
More informationFeatures. = +25 C, Vdd = +3V
v.117 HMC3LPE Typical Applications Features The HMC3LPE is ideal for: Millimeterwave Point-to-Point Radios LMDS VSAT SATCOM Functional Diagram Low Noise Figure:. db High Gain: db Single Positive Supply:
More informationFeatures OBSOLETE. = +25 C, With 0/+5V Control, 50 Ohm System. Parameter Frequency Min. Typ. Max. Units
v5.85 Typical Applications Features The HMC348LP3 / HMC348LP3E is ideal for: 75 Ohm Systems CATV Signal Distribution, Cable Modem Headend & DBS IF Switching 5 Ohm Systems Basestation Infrastructure & Test
More informationFeatures. = +25 C, Vcc1, Vcc2 = +5V. Parameter Min. Typ. Max. Units Fo Fo/2 RFOUT RFOUT/2 RFOUT/4
v4.11 Typical Applications Low noise MMIC VCO w/half Frequency, Divide-by-4 Outputs for: VSAT Radio Point to Point/Multipoint Radio Test Equipment & Industrial Controls Military End-Use Functional Diagram
More informationOBSOLETE HMC5846LS6 AMPLIFIERS - LINEAR & POWER - SMT. Electrical Specifications, T A. Features. Typical Applications. General Description
v1.414 Typical Applications The HMC846LS6 is ideal for: Point-to-Point Radios Point-to-Multi-Point Radios VSAT & SATCOM Military & Space Functional Diagram Electrical Specifications, T A = +2 C Vdd = Vdd1,
More informationHMC468LP3 / 468LP3E v
Typical Applications 1 LSB GaAs MMIC 3-BIT DIGITAL Features The HMC468LP3 / HMC468LP3E is ideal for: Cellular; UMTS/3G Infrastructure Fixed Wireless & WLL Microwave Radio & VSAT Test Equipment Functional
More informationAnalog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED
Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED www.analog.com www.hittite.com THIS PAGE INTENTIONALLY LEFT BLANK Typical Applications Transmit & Receive
More informationHMC542LP4 / 542LP4E v
5 Typical Applications The HMC542LP4 / HMC542LP4E is ideal for both RF and IF applications: Cellular/PCS/3G Infrastructure ISM, MMDS, WLAN, WiMAX, & WiBro Microwave Radio & VSAT Test Equipment and Sensors
More informationHMC320MS8G / 320MS8GE. Features OBSOLETE. = +25 C, Vdd = +3V
Typical Applications The HMCMSG(E) is ideal for: UNII HiperLAN Functional Diagram v. Electrical Specifications, T A = + C, Vdd = +V HMCMSG / MSGE Features General Description Selectable Functionality:
More informationHMC596LP4 / HMC596LP4E
v1.49 HMC596LP4 / HMC596LP4E MATRIX,.2-3. GHz Typical Applications 4x2 Switch Matrix for.2-3. GHz Applications: DBS LNBs & Multiswitches Cable Modem / CATV Cellular Systems Functional Diagram Features
More informationFeatures. = +25 C, 50 Ohm system
v6.312 Typical Applications Features The E is ideal for: Point-to-Point Radio VSAT Radio Test Instrumentation Microwave Sensors Military, ECM & Radar Functional Diagram Wide Bandwidth: 5-26.5 GHz Excellent
More information= +25 C, Vdd = Vs= P/S= +5V
v.3.5 db LSB GaAs MMIC 6-BIT DIGITAL VARIABLE GAIN Typical Applications The HMC68ALP5E is ideal for: IF & RF Applications Cellular/3G Infrastructure WiBro / WiMAX / 4G Microwave Radio & VSAT Test Equipment
More information= +25 C, With Vee = -5V & VCTL= 0/-5V
v.3.5db LSB GaAs MMIC 6-BIT DIGITAL Typical Applications Features The is ideal for: Basestation Infrastructure Fiber Optics & Broadband Telecom Microwave & VSAT Radios Military & Space Test Instrumentation
More informationFeatures OBSOLETE. Parameter Min. Typ. Max. Units. Frequency Range GHz Insertion Loss 5 7 db. Input Return Loss 16 db
v1.611 Typical Applications The is ideal for: EW Receivers Weather & Military Radar Satellite Communications Beamforming Modules Phase Cancellation Functional Diagram Features Low RMS Phase Error: 1.2
More informationFeatures. = +25 C, Vcc1 = Vcc2 = 5V, Zo = 75 Ohm [1]
HMC754SGE v.49 Typical Applications The HMC754SGE is ideal for: CATV / Broadband Infrastructure Test & Measurement Equipment Line Amps and Fiber Nodes Customer Premise Equipment Functional Diagram Output
More informationHMC454ST89 / 454ST89E
HMC44ST8 / 44ST8E Typical Applications The HMC44ST8 / HMC44ST8E is ideal for applications requiring a high dynamic range amplifi er: GSM, GPRS & EDGE CDMA & W-CDMA CATV/Cable Modem Fixed Wireless & WLL
More informationFeatures. Gain: 17 db. OIP3: 25 dbm. = +25 C, Vdd 1, 2 = +3V
v.7 HMCLC Typical Applications The HMCLC is ideal for use as a LNA or driver amplifier for: Point-to-Point Radios Point-to-Multi-Point Radios & VSAT Test Equipment and Sensors Military & Space Functional
More informationFeatures. = +25 C, Vdd 1, 2, 3 = +3V
v.11 HMC6LC AMPLIFIER, 6-2 GHz Typical Applications The HMC6LC is ideal for use as a LNA or driver amplifier for: Point-to-Point Radios Point-to-Multi-Point Radios & VSAT Test Equipment and Sensors Military
More informationHMC600LP4 / 600LP4E POWER DETECTORS - SMT. 75 db LOGARITHMIC DETECTOR / CONTROLLER MHz. Features. Typical Applications. General Description
v.99 HMC6LP4 / 6LP4E 7 db LOGARITHMIC DETECTOR / CONTROLLER - 4 MHz Typical Applications The HMC6LP4 / HMC6LP4E is ideal for IF and RF applications in: Cellular/PCS/G WiMAX, WiBro & Fixed Wireless Power
More informationFeatures = +5V. = +25 C, Vdd 1. = Vdd 2
v7.11 HMC1LC3 POWER AMPLIFIER, - GHz Typical Applications The HMC1LC3 is ideal for use as a medium power amplifier for: Microwave Radio & VSAT Military & Space Test Equipment & Sensors Fiber Optics LO
More informationHMC662LP3E POWER DETECTORS - SMT. 54 db, LOGARITHMIC DETECTOR, 8-30 GHz. Typical Applications. Features. Functional Diagram. General Description
Typical Applications The is ideal for: Point-to-Point Microwave Radio VSAT Wideband Power Monitoring Receiver Signal Strength Indication (RSSI) Test & Measurement Functional Diagram Features Wide Input
More informationFeatures. = +25 C, Vdd= 8V, Vgg2= 3V, Idd= 290 ma [1]
Typical Applications The is ideal for: Telecom Infrastructure Microwave Radio & VSAT Military EW, ECM & C 3 I Test Instrumentation Fiber Optics Functional Diagram Features P1dB Output Power: + dbm Gain:
More informationHMC1013LP4E. SDLVAs - SMT. SUCCESSIVE DETECTION LOG VIDEO AMPLIFIER (SDLVA), GHz
v.9 HMCLPE AMPLIFIER (SDLVA),.5-8.5 GHz Typical Applications The HMCLPE is ideal for: EW, ELINT & IFM Receivers DF Radar Systems ECM Systems Broadband Test & Measurement Power Measurement & Control Circuits
More informationHMC457QS16G / 457QS16GE
v3.97 HMC47QS16G / 47QS16GE Typical Applications The HMC47QS16G / HMC47QS16GE is ideal for applications requiring a high dynamic range amplifi er: CDMA & W-CDMA GSM, GPRS & Edge Base Stations & Repeaters
More informationFeatures OBSOLETE. = +25 C, Vcc= 5V [1]
v.41 Typical Applications The is Ideal for: Microwave Radio & VSAT Military Radios, Radar & ECM Test Instrumentation Functional Diagram Electrical Specifications, T A = + C, Vcc= V [1] Features Output
More informationFeatures. = +25 C, Vcc (Dig), Vcc (Amp), Vcc (RF) = +5V. Parameter Min. Typ. Max. Units Fo Fo/2 RFOUT RFOUT/2 RFOUT/4
HMC54LP5 / 54LP5E Typical Applications Low noise MMIC VCO w/half Frequency, Divide-by-4 Outputs for: Point to Point/Multipoint Radio Test Equipment & Industrial Controls SATCOM Military End-Use Functional
More informationFeatures OBSOLETE. = +25 C, With 0/+5V Control, 50 Ohm System
Typical Applications This switch is suitable for usage in 50- Ohm or 75-Ohm systems: Broadband Fiber Optics Switched Filter Banks Wireless below 8 GHz Functional Diagram Features Broadband Performance:
More informationFeatures. Parameter Frequency Min. Typ. Max. Units Insertion Loss DC GHz db. DC GHz
v1.11 HMC55 / 55E Typical Applications The HMC55 / HMC55E is ideal for: RFID & Electronic Toll Collection (etc) Tags, Handsets & Portables ISM, WLAN, WiMAX & WiBro Automotive Telematics Test Equipment
More informationFeatures. = +25 C, 50 Ohm System, Vcc= +5V
v5.1211 Typical Applications Prescaler for DC to 18 GHz PLL Applications: Point-to-Point / Multi-Point Radios VSAT Radios Fiber Optic Test Equipment Military Functional Diagram Features Ultra Low ssb Phase
More informationHMC612LP4 / 612LP4E v
HMC6LP4 / 6LP4E v.8 DETECTOR / CONTROLLER, 5 Hz - MHz Typical Applications Features The HMC6LP4(E) is ideal for IF and RF applications in: Cellular/PCS/G WiMAX, WiBro, WLAN, Fixed Wireless & Radar Power
More informationAnalog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED
Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED www.analog.com www.hittite.com THIS PAGE INTENTIONALLY LEFT BLANK v2.49 Typical Applications The HMC536LP2(E)
More informationFeatures. = +25 C, Vdd1, 2, 3 = 5V, Idd = 250 ma*
v.4 HMC498LC4 Typical Applications Features The HMC498LC4 is ideal for use as a LNA or Driver amplifier for: Point-to-Point Radios Point-to-Multi-Point Radios & VSAT Test Equipment & Sensors Military End-Use
More informationHMC601LP4 / 601LP4E POWER DETECTORS - SMT. 75 db, FAST SETTLING, LOGARITHMIC DETECTOR / CONTROLLER MHz. Typical Applications.
v.9 HMC6LP4 / 6LP4E 7 db, FAST SETTLING, LOGARITHMIC DETECTOR / CONTROLLER - 4 MHz Typical Applications The HMC6LP4(E) is ideal for IF and RF applications in: Cellular/PCS/G WiMAX, WiBro & Fixed Wireless
More information