TEL: FAX: v.117 HMC3 / 3E GENERAL PURPOSE 1 mw GaAs MMIC AMPLIFIER, GHz Broadband Gain & Return Vdd =
|
|
- Katherine Rogers
- 5 years ago
- Views:
Transcription
1 TEL: FAX: v.117 HMC3 / 3E GENERAL PURPOSE 1 mw GaAs MMIC AMPLIFIER, GHz Typical Applications Broadband or Narrow Band Applications: Cellular/PCS/3G Fixed Wireless & Telematics Cable Modem Termination Systems WLAN, Bluetooth & RFID Functional Diagram Features Gain: 1 db P1dB Output Power: +17 dbm@ +V Single Supply: +3V or +V No External Components Integrated DC Blocks Ultra Small Package: SOT26 General Description Electrical Specifications, T A = +2 C, as a function of Vdd The HMC3 & HMC3E are low cost MESFET MMIC amplifi ers that operate from a single +3 to +V supply from. to 3. GHz. The surface mount SOT26 amplifi er can be used as a broadband amplifi er stage or used with external matching for optimized narrow band applications. With Vdd biased at +V, the HMC3 & HMC3E offers 1 db of gain and + dbm of saturated output power while requiring only 3 ma of current. This amplifi er is ideal as a driver amplifi er for transmitters or for use as a local oscillator (LO) amplifi er to increase drive levels for passive mixers. The amplifi er occupies.1 in 2 (9 mm 2 ), making it ideal for compact radio designs. Vdd = +3V Vdd = +V Vdd = +V Vdd = +V Parameter Units Min. Typ. Max. Min. Typ. Max. Min. Typ. Max. Min. Typ. Max. Frequency Range GHz Gain db Gain Variation over Temperature db/ C Input Return Loss db Output Return Loss db Output Power for 1 db Compression (P1dB) dbm Saturated Output Power (Psat) dbm Output Third Order Intercept (IP3) dbm Noise Figure db Supply Current (Idd) ma - 2 SUNSTAR Alpha 射频通信 Road, Chelmsford, MA TEL: Phone: FAX: szss@3.com
2 TEL: FAX: v.117 HMC3 / 3E GENERAL PURPOSE 1 mw GaAs MMIC AMPLIFIER, GHz Broadband Gain & Return Vdd = +V 3 P1dB vs. Vdd Bias 2 RESPONSE (db) GAIN (db) S11 S21 S C - C P1dB (dbm) GAIN (db) Vdd=+V Vdd=+3V 2 Gain vs. Vdd = +V Gain vs. Vdd = +3V Input & Output Return Loss vs. Vdd Bias + C - C Reverse Isolation vs. Vdd Bias RETURN LOSS (db) S11 Vdd=+V S22 Vdd=+V S11 Vdd=+3V S22 Vdd=+3V REVERSE ISOLATION (db) Vdd=+V Vdd=+3V -3-6 SUNSTAR Alpha 射频通信 Road, Chelmsford, MA TEL: Phone: FAX: szss@3.com - 3
3 TEL: FAX: v.117 HMC3 / 3E GENERAL PURPOSE 1 mw GaAs MMIC AMPLIFIER, GHz Power 2. GHz, Vdd = +V Pout (dbm), GAIN (db), PAE (%) Psat (dbm) 2 2 Pout Gain PAE INPUT POWER (dbm) + C - C Power 2. GHz, Vdd = +V Pout (dbm), GAIN (db), PAE (%) P1dB (dbm) 2 2 Pout Gain PAE INPUT POWER (dbm) Psat vs. Vdd = +V Output P1dB vs. Vdd = +V 3 Output IP3 vs. Vdd = +V + C - C IP3 (dbm) C - C 6 - SUNSTAR Alpha 射频通信 Road, Chelmsford, MA TEL: Phone: FAX: szss@3.com
4 TEL: FAX: v.117 HMC3 / 3E GENERAL PURPOSE 1 mw GaAs MMIC AMPLIFIER, GHz Power 2. GHz, Vdd = +3V Pout (dbm), GAIN (db), PAE (%) Psat (dbm) Pout Gain PAE INPUT POWER (dbm) + C - C Power 2. GHz, Vdd = +3V Pout (dbm), GAIN (db), PAE (%) P1dB (dbm) 2 2 Pout Gain PAE INPUT POWER (dbm) Psat vs. Vdd = +3V Output P1dB vs. Vdd = +3V 3 Output IP3 vs. Vdd = +3V + C - C IP3 (dbm) C - C 6 SUNSTAR Alpha 射频通信 Road, Chelmsford, MA TEL: Phone: FAX: szss@3.com -
5 TEL: FAX: v.117 HMC3 / 3E GENERAL PURPOSE 1 mw GaAs MMIC AMPLIFIER, GHz Absolute Maximum Ratings Drain Bias Voltage (Vdd) Outline Drawing +7. Vdc RF Input Power (RFIN)(Vdd = +. Vdc) +1 dbm Channel Temperature 1 C Continuous Pdiss (T = C) (derate 6.2 mw/ C above C).6 W Thermal Resistance (channel to lead) C/W Storage Temperature -6 to +1 C Operating Temperature - to + C ESD Sensitivity (HBM) Class 1A Typical Supply Current vs. Vdd Vdd (Vdc) Idd (ma) ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS NOTES: 1. LEADFRAME MATERIAL: COPPER ALLOY 2. DIMENSIONS ARE IN INCHES [MILLIMETERS] 3. DIMENSION DOES NOT INCLUDE MOLDFLASH OF.1mm PER SIDE.. DIMENSION DOES NOT INCLUDE MOLDFLASH OF.2mm PER SIDE.. ALL GROUND LEADS MUST BE SOLDERED TO PCB RF GROUND Package Information Part Number Package Body Material Lead Finish MSL Rating Package Marking [3] [1] H3 HMC3 Low Stress Injection Molded Plastic Sn/Pb Solder MSL1 XXXX [2] 3E HMC3E RoHS-compliant Low Stress Injection Molded Plastic 1% matte Sn MSL1 XXXX [1] Max peak refl ow temperature of 23 C [2] Max peak refl ow temperature of 26 C [3] -Digit lot number XXXX - 6 SUNSTAR Alpha 射频通信 Road, Chelmsford, MA TEL: Phone: FAX: szss@3.com
6 TEL: FAX: v.117 HMC3 / 3E GENERAL PURPOSE 1 mw GaAs MMIC AMPLIFIER, GHz Pin Descriptions Pin Number Function Description Interface Schematic 1 RFOUT This pin is AC coupled and matched to Ohms. 2,, 6 GND These pins must be connected to RF/DC ground. 3 Vdd Power supply voltage. RFIN This pin is AC coupled and matched to Ohms. SUNSTAR Alpha 射频通信 Road, Chelmsford, MA TEL: Phone: FAX: szss@3.com - 7
7 TEL: FAX: v.117 HMC3 / 3E GENERAL PURPOSE 1 mw GaAs MMIC AMPLIFIER, GHz Evaluation PCB List of Materials for Evaluation PCB 132 [1] Item Description J1, J2 PCB Mount SMA Connector J3, J DC Pins U1 PCB [2] HMC3 / HMC3E Amplifi er 132 Evaluation Board [1] Reference this number when ordering complete evaluation PCB [2] Circuit Board Material: Roger 3 The circuit board used in the fi nal application should use RF circuit design techniques. Signal lines should have ohm impedance while the package ground leads should be connected directly to the ground plane similar to that shown. A sufficient number of via holes should be used to connect the top and bottom ground planes. The evaluation circuit board shown is available from Hittite upon request. - SUNSTAR Alpha 射频通信 Road, Chelmsford, MA TEL: Phone: FAX: szss@3.com
8 TEL: FAX: v.117 HMC3 / 3E GENERAL PURPOSE 1 mw GaAs MMIC AMPLIFIER, GHz Notes: SUNSTAR Alpha 射频通信 Road, Chelmsford, MA TEL: Phone: FAX: szss@3.com - 9
Features OBSOLETE. = +25 C, as a function of Vdd. Vdd = +3V Vdd = +5V Vdd = +5V Vdd = +5V Parameter
v5.117 HMC3 / 3E GENERAL PURPOSE 1 mw GaAs MMIC AMPLIFIER,. - 3. GHz Typical Applications Broadband or Narrow Band Applications: Cellular/PCS/3G Fixed Wireless & Telematics Cable Modem Termination Systems
More informationFeatures. = +25 C, Vdd= +3V. Parameter Min. Typ. Max. Units Frequency Range GHz Gain db
7 Typical Applications The HMC286 / HMC286E is ideal for: BlueTooth Home RF 82.11 WLAN Radios PCMCIA Platforms Functional Diagram v3.41 Features 2.4 GHz LNA Noise Figure: 1.7 db Gain: 19 db Single Supply:
More informationHMC320MS8G / 320MS8GE. Features OBSOLETE. = +25 C, Vdd = +3V
Typical Applications The HMCMSG(E) is ideal for: UNII HiperLAN Functional Diagram v. Electrical Specifications, T A = + C, Vdd = +V HMCMSG / MSGE Features General Description Selectable Functionality:
More informationFeatures
HMC37SC7E v1.1.3-3. GHz Typical Applications The HMC37SC7E is ideal for: Cellular/PCS/3G WCS, mmds & ism Fixed Wireless & WLAN Private Land Mobile Radio Functional Diagram Features Single Supply: Vdd =
More informationHMC639ST89 / 639ST89E
Typical Applications The HMC39ST9(E) is ideal for: Cellular / PCS / 3G WiMAX, WiBro, & Fixed Wireless CATV & Cable Modem Microwave Radio IF and RF Sections Functional Diagram Electrical Specifications,
More informationFeatures. = +25 C, Vdd = +7V, Idd = 1340 ma [1]
Typical Applications The HMC591LP5 / HMC591LP5E is ideal for use as a power amplifi er for: Point-to-Point Radios Point-to-Multi-Point Radios Test Equipment & Sensors Military End-Use Space Features Saturated
More informationHMC486LP5 / 486LP5E LINEAR & POWER AMPLIFIERS - SMT. SURFACE MOUNT PHEMT 2 WATT POWER AMPLIFIER, 7-9 GHz. Typical Applications.
v2. Typical Applications The HMC486LP5(E) is ideal for: Point-to-Point Radios Point-to-Multi-Point Radios Test Equipment and Sensors Military End-Use Features Saturated Power: +33 dbm @ 2% PAE Output IP3:
More informationHMC471MS8G / 471MS8GE. Features OBSOLETE. DC GHz GHz GHz GHz GHz
v1.65 Typical Applications The HMC471MSG / HMC471MSGE is a dual RF/IF gain block & LO or PA driver: Cellular / PCS / 3G Fixed Wireless & WLAN CATV, Cable Modem & DBS Microwave Radio & Test Equipment Functional
More informationFeatures OBSOLETE. Saturated Output Power (Psat) dbm Output Third Order Intercept (IP3) dbm Supply Current (Idd) ma
7 Typical Applications The HMC667LP2(E) is ideal for: WiMAX, WiBro & Fixed Wireless SDARS & WLAN Receivers Infrastructure & Repeaters Access Points Telematics & DMB Functional Diagram v2.11 Electrical
More informationAnalog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED
Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED www.analog.com www.hittite.com THIS PAGE INTENTIONALLY LEFT BLANK v3.38 POWER AMPLIFIER, 2-2 GHz Typical
More informationHMC454ST89 / 454ST89E. Features. = +25 C, Vs= +5V [1]
Typical Applications The HMC44ST8 / HMC44ST8E is ideal for applications requiring a high dynamic range amplifi er: GSM, GPRS & EDGE CDMA & W-CDMA CATV/Cable Modem Fixed Wireless & WLL Features Output IP3:
More informationHMC589ST89 / 589ST89E. Features OBSOLETE. DC GHz GHz GHz. db Gain 22
v.71 HMC59ST9 / 59ST9E Typical Applications The HMC59ST9 / HMC59ST9E is ideal for: Cellular / PCS / 3G Fixed Wireless & WLAN CATV, Cable Modem & DBS Microwave Radio & Test Equipment IF & RF Applications
More informationFeatures. = +25 C, Vdd = +5V, Rbias = 10 Ohms*
Typical Applications Functional Diagram The HMC36LP3 / HMC36LP3E is ideal for: Cellular/3G Infrastructure Base Stations & Repeaters CDMA, W-CDMA, & TD-SCDMA Private Land Mobile Radio GSM/GPRS & EDGE UHF
More informationHMC454ST89 / 454ST89E
HMC44ST8 / 44ST8E Typical Applications The HMC44ST8 / HMC44ST8E is ideal for applications requiring a high dynamic range amplifi er: GSM, GPRS & EDGE CDMA & W-CDMA CATV/Cable Modem Fixed Wireless & WLL
More informationHMC310MS8G / 310MS8GE. Features OBSOLETE. = +25 C, Vdd = +3V
Typical Applications Transmit & Receive Switch for 2. GHz Applications: Bluetooth HomeRF WLAN Radios Functional Diagram v3.67 Electrical Specifications, T A = +25 C, Vdd = +3V HMC31MSG / 31MSGE Features
More informationTEL: FAX: HMC3LP / 3LPE v.21 SMT GaAs HBT MMIC x ACTIVE FREQUENCY MULTIPLIER, GHz OUTPUT Evalua
TEL:755-83396822 FAX:755-83376182 E-MAIL: szss2@163.com HMC3LP / 3LPE v.21 SMT GaAs HBT MMIC x ACTIVE FREQUENCY MULTIPLIER, 9.8-11.2 GHz OUTPUT Pin Description Pin Number Function Description Interface
More informationFeatures. = +25 C, Vdd1 = Vdd2 = +3.5V, Idd = 80 ma [2]
Typical Applications This is ideal for: Features Low Noise Figure: 1.8 db Point-to-Point Radios Point-to-Multi-Point Radios Military & Space Test Instrumentation Functional Diagram High Gain: 19 db High
More informationFeatures. = +25 C, Vs = +5V. Parameter Min. Typ. Max. Min. Typ. Max. Units Frequency Range MHz Gain
Typical Applications Functional Diagram The HMC32LP3 / HMC32LP3E is ideal for basestation receivers: GSM, GPRS & EDGE CDMA & W-CDMA Private Land Mobile Radio HMC32LP3 / 32LP3E AMPLIFIER, 00-1000 MHz Features
More informationHMC580ST89 / 580ST89E. Features OBSOLETE. DC GHz GHz GHz. db db db Gain Variation Over Temperature DC GHz 0.
v.71 HMC5ST9 / 5ST9E Typical Applications The HMC5ST9 / HMC5ST9E is ideal forr: Cellular / PCS / 3G Fixed Wireless & WLAN CATV, Cable Modem & DBS Microwave Radio & Test Equipment IF & RF Applications Functional
More informationFeatures. = +25 C, Vdd= 5V. Parameter Min. Typ. Max. Min. Typ. Max. Min. Typ. Max. Units. Frequency Range GHz
Typical Applications The HMC62LP / HMC62LPE Wideband LNA is ideal for: Telecom Infrastructure Microwave Radio & VSAT Military EW, ECM & C 3 I Test Instrumentation Fiber Optics Functional Diagram Features
More informationFeatures. = +25 C, Vcc = +5.0V. Vcc = +5V Parameter
Typical Applications Ideal as a Driver & Amplifier for: 2.2-2.7 GHz MMDS 3. GHz Wireless Local Loop - 6 GHz UNII & HiperLAN Functional Diagram Features P1dB Output Power: +14 dbm Output IP3: +27 dbm Gain:
More informationFeatures. = +25 C, Vdd= +12V, Vgg2= +5V, Idd= 400 ma*
Typical Applications The HMC637LP5(E) wideband PA is ideal for: Features P1dB Output Power: +29 dbm Telecom Infrastructure Microwave Radio & VSAT Military & Space Test Instrumentation Fiber Optics Functional
More informationHMC639ST89 / 639ST89E
v3.1 HMC63ST / 63STE AMPLIFIER,.2-4. GHz Typical Applications The HMC63ST(E) is ideal for: Cellular / PCS / 3G WiMAX, WiBro, & Fixed Wireless CATV & Cable Modem Microwave Radio IF and RF Sections Features
More informationHMC480ST89 / 480ST89E
v2.7 HMCST9 / ST9E Typical Applications The HMCST9 / HMCST9E is an ideal RF/IF gain block & LO or PA driver for: Cellular / PCS / 3G Fixed Wireless & WLAN CATV, Cable Modem & DBS Microwave Radio & Test
More informationGain Control Range db
v1.112-12 GHz Typical Applications The is ideal for: Point-to-Point Radio Point-to-Multi-Point Radio EW & ECM Subsystems X-Band Radar Test Equipment & Sensors Functional Diagram Features Wide Gain Control
More informationFeatures. = +25 C, Vss= -5V, Vdd= +5V, Control Voltage= 0/ +5V, 50 Ohm System. Frequency Range GHz Insertion Loss* 4 6.
v1.28 HMC647LP6 / 647LP6E Typical Applications The HMC647LP6(E) is ideal for: EW Receivers Weather & Military Radar Satellite Communications Beamforming Modules Phase Cancellation Functional Diagram Features
More informationAnalog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED
Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED www.analog.com www.hittite.com THIS PAGE INTENTIONALLY LEFT BLANK v2.65 HMC455LP3 / 455LP3E Typical
More informationFeatures OBSOLETE. DC GHz GHz GHz GHz GHz
v2.71 HMC75ST9 / 75ST9E Typical Applications The HMC75ST9 / HMC75ST9E is an ideal RF/IF gain block & LO or PA driver: Cellular / PCS / 3G Fixed Wireless & WLAN CATV, Cable Modem & DBS Microwave Radio &
More informationFeatures OBSOLETE. = +25 C, 50 Ohm System GHz degrees Insertion Loss 6-15 GHz 8 11 db. Return Loss (Input and Output) 6-15 GHz 7 db
v2.29 6 ANALOG PHASE SHIFTER, 1 Typical Applications The HMC538LP4 / HMC538LP4E is ideal for: Fiber Optics Military Test Equipment Functional Diagram Features Electrical Specifications, T A = +25 C, 5
More informationAnalog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED
Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED www.analog.com www.hittite.com THIS PAGE INTENTIONALLY LEFT BLANK Typical Applications Transmit & Receive
More informationSURFACE MOUNT PHEMT 2 WATT POWER AMPLIFIER,
v2.617 AMPLIFIER, - 12 GHz Typical Applications The is ideal for use as a power amplifier for: Point-to-Point Radios Point-to-Multi-Point Radios Test Equipment and Sensors Military End-Use Features Saturated
More informationHMC1040LP3CE. Amplifiers - Low Noise - smt. GaAs phemt MMIC LOW NOISE AMPLIFIER, GHz. Features. Typical Applications. General Description
v.112 HMC14LP3CE AMPLIFIER, 24-43. GHz Typical Applications This HMC14LP3BE is ideal for: Point-to-Point Radios Test Instrumentation SatCom Transponders & VSAT Industrial Sensors EW & ECM Subsystems Functional
More informationHMC694LP4 / 694LP4E. Variable gain amplifiers - ANALOG - smt. GaAs MMIC ANALOG VARIABLE GAIN AMPLIFIER, 6-17 GHz. Typical Applications
v2.1 Typical Applications The HMC694LP4(E) is ideal for: Point-to-Point Radio Point-to-Multi-Point Radio EW & ECM X-Band Radar Test Equipment Features Wide Gain Control Range: 23 db Single Control Voltage
More informationHMC457QS16G / 457QS16GE
v3.97 HMC47QS16G / 47QS16GE Typical Applications The HMC47QS16G / HMC47QS16GE is ideal for applications requiring a high dynamic range amplifi er: CDMA & W-CDMA GSM, GPRS & Edge Base Stations & Repeaters
More informationAnalog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED
Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED www.analog.com www.hittite.com THIS PAGE INTENTIONALLY LEFT BLANK v.51 HMC7LP5E POWER AMPLIFIER,.2
More informationFeatures = +5V. = +25 C, Vdd 1. = Vdd 2
v1.11 HMC51LP3 / 51LP3E POWER AMPLIFIER, 5-1 GHz Typical Applications The HMC51LP3(E) is ideal for: Microwave Radio & VSAT Military & Space Test Equipment & Sensors Fiber Optics LO Driver for HMC Mixers
More informationFeatures. Parameter Frequency Min. Typ. Max. Units Insertion Loss DC GHz db. DC GHz
v1.11 HMC55 / 55E Typical Applications The HMC55 / HMC55E is ideal for: RFID & Electronic Toll Collection (etc) Tags, Handsets & Portables ISM, WLAN, WiMAX & WiBro Automotive Telematics Test Equipment
More informationHMC326MS8G / 326MS8GE
v9.511 AMPLIFIER, 3. - 4.5 GHz Typical Applications The HMC326MS8G / HMC326MS8GE is ideal for: Microwave Radios Broadband Radio Systems Wireless Local Loop Driver Amplifier Functional Diagram Features
More informationFeatures OBSOLETE. = +25 C, Rbias = 0 Ohm. Bypass Mode Failsafe Mode Parameter
7 Typical Applications The HMC668LP3(E) is ideal for: Cellular/3G and LTE/WiMAX/4G BTS & Infrastructure Repeaters and Femtocells Tower Mounted Amplifiers Test & Measurement Equipment Functional Diagram
More informationHMC599ST89 / 599ST89E. Features. The HMC599ST89(E) is ideal for: = +25 C MHz. Gain Variation Over Temperature MHz 0.
HMCST / STE Typical Applications v2.3 GaAs phemt MMIC LNA, Ohm - 1 MHz Features The HMCST(E) is ideal for: High P1 Output Power: +1 m VHF / UHF Antennas HDTV Receivers CMTS Equipment CATV, Cable Modem
More informationFeatures OBSOLETE. Isolation DC GHz db
Typical Applications Features - 224 The is ideal for: Cellular / 4G Infrastructure WiMAX, WiBro & Fixed Wireless Automotive Telematics Mobile Radio Test Equipment Functional Diagram Input P1dB: + @ Vdd
More informationHMC454ST89 / 454ST89E
HMC44ST8 / 44ST8E Typical Applications The HMC44ST8 / HMC44ST8E is ideal for applications requiring a high dynamic range amplifi er: GSM, GPRS & EDGE CDMA & W-CDMA CATV/Cable Modem Fixed Wireless & WLL
More informationv3.99 Attenuation vs. Frequency over Vctrl V -1.6 V -.6 V. V Attenuation vs. Vctrl1 Over 1 GHz, Vctrl2
5 TEL:755-83396822 FAX:755-83376182 E-MAIL: szss2@163.com Typical Applications v3.99 Features The is ideal for: Point-to-Point Radio VSAT Radio Test Instrumentation Microwave Sensors Military, ECM & Radar
More informationHMC478SC70 / 478SC70E v
HMC47SC7 / 47SC7E v2.14 Typical Applications The HMC47SC7(E) is an ideal for: Cellular / PCS / 3G WiBro / WiMAX / 4G Fixed Wireless & WLAN CATV, Cable Modem & DBS Microwave Radio & Test Equipment Functional
More informationAnalog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED
Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED www.analog.com www.hittite.com THIS PAGE INTENTIONALLY LEFT BLANK v.51 HMC32LC Typical Applications
More informationParameter Min. Typ. Max. Units Frequency Range GHz
v.312 27-31. GHz Typical Applications The is ideal for: Point-to-Point Radio Point-to-Multi-Point Radio EW & ECM Subsystems Ka-Band Radar & VSAT Test Equipment Functional Diagram Features Wide Gain Control
More informationFeatures. = +25 C, Vdd1 = Vdd2 = +3.5V, Idd = 70 ma
v2.61 Typical Applications This is ideal for: Point-to-Point Radios Point-to-Multi-Point Radios Military & Space Test Instrumentation Functional Diagram Features Low Noise Figure: 2.5 db Gain: 13 db P1dB
More informationFeatures. = +25 C, Vdd1 = Vdd2 = +3.5V, Idd = 45 ma
v2.61 Typical Applications This is ideal for: Point-to-Point Radios Point-to-Multi-Point Radios Military & Space Test Instrumentation Functional Diagram Features Low Noise Figure: 2. db High Gain: 22 db
More informationFeatures = +5V. = +25 C, Vdd 1. = Vdd 2
v7.11 HMC1LC3 POWER AMPLIFIER, - GHz Typical Applications The HMC1LC3 is ideal for use as a medium power amplifier for: Microwave Radio & VSAT Military & Space Test Equipment & Sensors Fiber Optics LO
More informationAnalog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED
Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED www.analog.com www.hittite.com THIS PAGE INTENTIONALLY LEFT BLANK HMC476SC7 / 476SC7E v4.814 Typical
More informationAnalog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED
Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED www.analog.com www.hittite.com THIS PAGE INTENTIONALLY LEFT BLANK v1.14 AMPLIFIER, 18-4 GHz Typical
More informationFeatures. = +25 C, Vdd = +5V, 5 dbm Drive Level
v1.4 Typical Applications The HMC561LP3E are suitable for: Clock Generation Applications: SONET OC-192 & SDH STM-64 Point-to-Point & VSAT Radios Test Instrumentation Military & Space Functional Diagram
More informationFeatures. Parameter Frequency Min. Typ. Max. Units Insertion Loss DC GHz db
v.1212 HMC55A / 55AE Typical Applications The HMC55A / HMC55AE is ideal for: RFID & Electronic Toll Collection (ETC) Tags, Handsets & Portables ISM, WLAN, WiMAX & WiBro Automotive Telematics Test Equipment
More informationFeatures. Parameter Min Typ. Max Min Typ. Max Min Typ Max Units Frequency Range GHz Gain
Typical Applications The is ideal for: Point-to-Point Radios Point-to-Multi-Point Radios VSAT & SATCOM Marine Radar Military EW & ECM Functional Diagram Features High Saturated Output Power: dbm @ % PAE
More informationHMC618ALP3E AMPLIFIERS - LOW NOISE - SMT. GaAs SMT phemt LOW NOISE AMPLIFIER, GHz. Typical Applications. Features. Functional Diagram
7 Typical Applications The is ideal for: Cellular/3G and LTE/WiMAX/4G BTS & Infrastructure Repeaters and Femto Cells Public Safety Radios Functional Diagram v. Electrical Specifications T A = + C, Rbias
More informationFeatures. DC GHz GHz GHz DC GHz GHz GHz GHz DC - 4 GHz GHz Supply Current (Icq) ma
HMC311ST9 / 311ST9E v.17 MMIC AMPLIFIER, DC - GHz Typical Applications The HMC311ST9(E) is ideal for: Cellular / PCS / 3G Fixed Wireless & WLAN CATV & Cable Modem Microwave Radio Functional Diagram Features
More informationFeatures OBSOLETE. Parameter Min. Typ. Max. Units. Frequency Range GHz Insertion Loss 5 7 db. Input Return Loss 16 db
v1.611 Typical Applications The is ideal for: EW Receivers Weather & Military Radar Satellite Communications Beamforming Modules Phase Cancellation Functional Diagram Features Low RMS Phase Error: 1.2
More informationFeatures. Output Power for 1 db Compression (P1dB) dbm Saturated Output Power (Psat) dbm
v1.314 Typical Applications Features The is ideal for: Test Instrumentation Microwave Radio & VSAT Telecom Infrastructure Military & Space Fiber optics Functional Diagram P1dB Output Power: +27 dbm Psat
More informationFeatures. = +25 C, Vdd= 8V, Vgg2= 3V, Idd= 290 ma [1]
Typical Applications The is ideal for: Telecom Infrastructure Microwave Radio & VSAT Military EW, ECM & C 3 I Test Instrumentation Fiber Optics Functional Diagram Features P1dB Output Power: + dbm Gain:
More informationFeatures. = +25 C, Vdd = +5V, Idd = 400mA [1]
v.61 Typical Applications The is ideal for: Point-to-Point Radios Point-to-Multi-Point Radios VSAT Military & Space Features Saturated Output Power:.5 dbm @ 21% PAE High Output IP3: 34.5 dbm High Gain:.5
More informationFeatures OBSOLETE. = +25 C, Vctl = 0/+8 Vdc, 50 Ohm System. Parameter Frequency* Min. Typ. Max. Units Tx - RFC MHz db.
GaAs MMIC 1W T/R Typical Applications Features 1 The HMC446 / HMC446E is ideal for: ISM/Cellular Portables/Handsets Automotive Telematic Applications Mobile Radio Functional Diagram Low Insertion Loss:.6
More informationHMC245QS16 / 245QS16E. Features OBSOLETE. Parameter Frequency Min. Typ. Max. Units. DC GHz DC GHz DC GHz
Typical Applications The HMC245QS16 / HMC245QS16E is ideal for: Basestation Infrastructure CATV / DBS Wireless Local Loop Test Equipment Functional Diagram Features Low Insertion Loss:.5 @ 2. GHz Non-Refl
More informationHMC368LP4 / 368LP4E FREQ. MULTIPLIERS - ACTIVE - SMT. SMT GaAs PHEMT MMIC AMP-DOUBLER-AMP, 9-16 GHz OUTPUT. Typical Applications.
v3.5 Typical Applications Microwave Radios & VSAT Fiber Optic Infrastructure Military Communications & Radar Functional Diagram Features Output Power: +15 dbm Wide Input Power Range: to +1 dbm 1 khz SSB
More informationFeatures. = +25 C, Vcc =5V, Vpd = 5V. Parameter Min. Typ. Max. Min. Typ. Max. Min. Typ. Max Units
v2.917 Typical Applications Features The is ideal for: Point-to-Point Radios Point-to-Multipoint Radios VSAT LO Driver for HMC Mixers Military EW & ECM Functional Diagram High Output IP3: +28 dbm Single
More informationAnalog Devices Welcomes Hittite Microwave Corporation
Analog Devices Welcomes Hittite Microwave Corporation www.analog.com www.hittite.com THIS PAGE INTENTIONALLY LEFT BLANK v.915 GaAs MMIC 6-BIT DIGITAL Typical Applications The HMC648ALP6E is ideal for:
More informationAnalog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED
Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED www.analog.com www.hittite.com THIS PAGE INTENTIONALLY LEFT BLANK v2.49 Typical Applications The HMC536LP2(E)
More informationFeatures. = +25 C, 50 Ohm System, Vcc= +3V
v.1 HMC32 / 32E Typical Applications Prescaler for DC to C Band PLL Applications: UNII, Point-to-Point & VSAT Radios 82.11a & HiperLAN WLAN Fiber Optic Cellular / 3G Infrastructure Functional Diagram Features
More informationFeatures. = +25 C, Vdd1, 2, 3 = 5V, Idd = 250 ma*
v.4 HMC498LC4 Typical Applications Features The HMC498LC4 is ideal for use as a LNA or Driver amplifier for: Point-to-Point Radios Point-to-Multi-Point Radios & VSAT Test Equipment & Sensors Military End-Use
More informationHMC274QS16 / 274QS16E. Features OBSOLETE. = +25 C, Vdd = +3V to +5V & Vctl = 0/Vdd. Parameter Frequency Min. Typical Max. Units
Typical Applications Functional Diagram v1. The HMC274QS16 / HMC274QS16E is ideal for: Cellular/PCS/3G Infrastructure 2.4 GHz ISM Radios Wireless Data HMC274QS16 / 274QS16E 1 LSB GaAs IC -BIT DIGITAL ATTENUATOR,.7-2.7
More informationFeatures. Parameter Frequency Min. Typ. Max. Units DC GHz DC GHz DC GHz DC GHz DC GHz Isolation DC - 4.
Typical Applications The is ideal for: Cellular / 4G Infrastructure WiMAX, WiBro & Fixed Wireless Automotive Telematics Mobile Radio Test Equipment Features Input P1: +40 @ Vdd = +8V High Third Order Intercept:
More informationFeatures OBSOLETE. = +25 C, 50 Ohm System, Vcc= 3V
Typical Applications Prescaler for DC to 4. GHz PLL Applications: DBS/CATV Tuners 82.11x & HiperLAN WLAN Fixed Wireless & WLL Microwave & VSAT Radios Cellular & 3G Functional Diagram v.93 HMC42MS8 / 42MS8E
More informationOBSOLETE. = +25 C, With Vdd = +5V & Vctl = 0/+5V. Parameter Frequency Min. Typ. Max. Units DC - 4 GHz GHz Attenuation Range DC - 10 GHz 10 db
Typical Applications The HMC8LP3E is ideal for: Test Equipment and Sensors ISM, MMDS, WLAN, WiMAX, WiBro Microwave Radio & VSAT Cellular Infrastructure Functional Diagram HMC8LP3E v.11 1 GaAs MMIC 1-BIT
More informationFeatures. Parameter Frequency Min. Typ. Max. Units
v1.6 Typical Applications The HMC545A / HMC545AE is ideal for: Cellular/3G Infrastructure Private Mobile Radio Handsets WLAN, WiMAX & WiBro Automotive Telematics Test Equipment Functional Diagram Features
More informationParameter Frequency (GHz) Min. Typ. Max. Units DC GHz GHz GHz GHz Attenuation Range DC - 5.
5 Typical Applications HMC54LP3 / 54LP3E v.65 1 LSB GaAs MMIC 4-BIT DIGITAL Features The HMC54LP3 / HMC54LP3E is ideal for both RF and IF applications: Cellular Infrastructure ISM, MMDS, WLAN, WiMAX, WiBro
More informationOBSOLETE. Parameter Frequency (GHz) Min. Typ. Max. Units DC GHz GHz GHz Attenuation Range DC - 5.
5 Typical Applications HMC54LP3 / 54LP3E v.65 1 LSB GaAs MMIC 4-BIT DIGITAL Features The HMC54LP3 / HMC54LP3E is ideal for both RF and IF applications: Cellular Infrastructure ISM, MMDS, WLAN, WiMAX, WiBro
More informationFeatures. = +25 C, Vdd = +5 Vdc, 50 Ohm System
v4.19 Typical Applications The HMC174MS8(E) is ideal for: Infrastructure & Repeaters Cellular/3G & WiMAX Portable Wireless LNA Protection Automotive Telematics Test Equipment Features Low Insertion Loss:.5
More informationFeatures. Gain: 14.5 db. Electrical Specifications [1] [2] = +25 C, Rbias = 825 Ohms for Vdd = 5V, Rbias = 5.76k Ohms for Vdd = 3V
Typical Applications The HMC77ALP3E is ideal for: Fixed Wireless and LTE/WiMAX/4G BTS & Infrastructure Repeaters and Femtocells Public Safety Radio Access Points Functional Diagram Features Noise Figure:.
More informationFeatures. = +25 C, Vdd 1, 2, 3 = +3V
v.11 HMC6LC AMPLIFIER, 6-2 GHz Typical Applications The HMC6LC is ideal for use as a LNA or driver amplifier for: Point-to-Point Radios Point-to-Multi-Point Radios & VSAT Test Equipment and Sensors Military
More informationFeatures. = +25 C, Vdd = +4V, Idd = 90 ma [2]
v.91 HMCLCB AMPLIFIER, 1-27 GHz Typical Applications This HMCLCB is ideal for: Features Noise Figure: 2.2 db @ 2 GHz Point-to-Point Radios Point-to-Multi-Point Radios Military & Space Test Instrumentation
More informationFeatures. = +25 C, Vcc = 5V, Vpd = 5V. Parameter Min. Typ. Max. Min. Typ. Max. Units
v2.717 MMIC AMPLIFIER, 4 - GHz Typical Applications The is ideal for: Cellular / PCS / 3G Fixed Wireless & WLAN CATV, Cable Modem & DBS Microwave Radio & Test Equipment IF & RF Applications Functional
More informationHMC307QS16G / 307QS16GE. Features OBSOLETE. = +25 C, Vee = -5V & VCTL= 0/Vee. Parameter Frequency Min. Typical Max. Units DC - 1.
5 Typical Applications v8.98 HMC37QS16G / 37QS16GE 1 LSB GaAs MMIC 5-BIT DIGITAL Features The HMC37QS16G(E) is ideal for: Cellular PCS, ISM, MMDS Wireless Local Loop Functional Diagram 1 LSB Steps to 31
More informationFeatures. = +25 C, Vdd = +3V to +5V & Vctl = 0/Vdd (Unless Otherwise Stated)
Typical Applications Functional Diagram v1.7 The HMC288MS8 / HMC288MS8E is ideal for: Cellular PCS, ISM, MMDS WLL applications HMC288MS8 / 288MS8E 2 LSB GaAs MMIC 3-BIT DIGITAL ATTENUATOR,.7-3.7 GHz Features
More informationFeatures. Gain: 17 db. OIP3: 25 dbm. = +25 C, Vdd 1, 2 = +3V
v.7 HMCLC Typical Applications The HMCLC is ideal for use as a LNA or driver amplifier for: Point-to-Point Radios Point-to-Multi-Point Radios & VSAT Test Equipment and Sensors Military & Space Functional
More informationFeatures. = +25 C, Vdd= 8V, Idd= 75 ma*
HMC46LC5 Typical Applications v3.11 AMPLIFIER, DC - 2 GHz Features The HMC46LC5 is ideal for: Noise Figure: 2.5 db @ 1 GHz Telecom Infrastructure Microwave Radio & VSAT Military & Space Test Instrumentation
More informationAnalog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED
Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED www.analog.com www.hittite.com THIS PAGE INTENTIONALLY LEFT BLANK v.613 Typical Applications The HMC545A
More informationHMC997LC4. Variable Gain Amplifier - SMT. VARIABLE GAIN AMPLIFIER GHz. Typical Applications. General Description. Functional Diagram
v2.14 Typical Applications The is ideal for: Point-to-Point Radio Point-to-Multi-Point Radio EW & ECM Subsystems Ka-Band Radar Test Equipment Functional Diagram Features Wide Gain Control Range: 1 db Single
More informationAnalog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED
Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED www.analog.com www.hittite.com THIS PAGE INTENTIONALLY LEFT BLANK v.41 Typical Applications The HMC649ALP6E
More informationHMC546MS8G / 546MS8GE
v6.89 HMC546MS8G / 546MS8GE GaAs MMIC 2W FAILSAFE SWITCH.2-2.2 GHz Typical Applications The HMC546MS8G(E) is ideal for: LNA Protection, WiMAX, WiBro Cellular/PCS/3G Infrastructure Private Mobile Radio
More informationFeatures OBSOLETE. = +25 C, Vdd = +3.3 Vdc, 50 Ohm System
Typical Applications v1.1 ATTENUATOR,.4-2.2 GHz Features The HMC473MS8 / HMC473MS8E is ideal for: Cellular, UMTS/3G Infrastructure Portable Wireless GPS Functional Diagram RoHS Compliant Product Single
More informationFeatures. = +25 C, Vdd = 5V
v3.117 HMC1LH5 Typical Applications The HMC1LH5 is a medium PA for: Telecom Infrastructure Military Radio, Radar & ECM Space Systems Test Instrumentation Functional Diagram Features Gain: 5 db Saturated
More informationFeatures. Parameter Frequency (GHz) Min. Typ. Max. Units GHz GHz GHz. Attenuation Range GHz 15.
v.91.5 db LSB GaAs MMIC 5-BIT DIGITAL ATTENUATOR,.1-33 GHz Typical Applications The HMC941LP4 / HMC941LP4E is ideal for: Fiber Optics & Broadband Telecom Microwave Radio & VSAT Military Radios, Radar &
More informationFeatures OBSOLETE. = +25 C, With 0/+5V Control, 50 Ohm System. Parameter Frequency Min. Typ. Max. Units
v5.85 Typical Applications Features The HMC348LP3 / HMC348LP3E is ideal for: 75 Ohm Systems CATV Signal Distribution, Cable Modem Headend & DBS IF Switching 5 Ohm Systems Basestation Infrastructure & Test
More informationHMC346MS8G / 346MS8GE
Typical Applications v7.18 Features This attenuator is ideal for use as a VVA for DC - 8 GHz applications: Point-to-Point Radio VSAT Radio Functional Diagram Wide Bandwidth: DC - 8 GHz Low Phase Shift
More informationOBSOLETE HMC5846LS6 AMPLIFIERS - LINEAR & POWER - SMT. Electrical Specifications, T A. Features. Typical Applications. General Description
v1.414 Typical Applications The HMC846LS6 is ideal for: Point-to-Point Radios Point-to-Multi-Point Radios VSAT & SATCOM Military & Space Functional Diagram Electrical Specifications, T A = +2 C Vdd = Vdd1,
More informationFeatures OBSOLETE. = +25 C, Vdd = +3V to +5V & Vctl = 0/Vdd (Unless Otherwise Stated) Parameter Frequency Min. Typical Max. Units
Typical Applications The HMC288MS8 / HMC288MS8E is ideal for: Cellular PCS, ISM, MMDS WLL applications Functional Diagram 2 LSB GaAs MMIC 3-BIT DIGITAL ATTENUATOR,.7-3.7 GHz Features 2 LSB Steps to 14
More informationHMC241AQS16 / 241AQS16E
v00.1213 Typical Applications Features The HMC241AQS16 & HMC241AQS16E are ideal for: Base Stations & Portable Wireless CATV / DBS Wireless Local Loop Test Equipment Functional Diagram RoHS Compliant Product
More informationOBSOLETE. Parameter Frequency (GHz) Min. Typ. Max. Units DC GHz GHz. Attenuation Range DC - 3 GHz 31 db
5 Typical Applications The HMC47LP3(E) is ideal for: Cellular; UMTS/3G Infrastructure ISM, MMDS, WLAN, WiMAX Microwave Radio & VSAT Test Equipment and Sensors Functional Diagram HMC47LP3 / 47LP3E v4.118
More informationFeatures. = +25 C, Vcc1 = Vcc2 = 5V, Zo = 75 Ohm [1]
HMC754SGE v.49 Typical Applications The HMC754SGE is ideal for: CATV / Broadband Infrastructure Test & Measurement Equipment Line Amps and Fiber Nodes Customer Premise Equipment Functional Diagram Output
More informationHMC659LC5 LINEAR & POWER AMPLIFIERS - SMT. GaAs PHEMT MMIC POWER AMPLIFIER, DC - 15 GHz. Features. Typical Applications. General Description
v.61 Typical Applications The wideband PA is ideal for: Telecom Infrastructure Microwave Radio & VSAT Military & Space Test Instrumentation Fiber Optics Functional Diagram Features P1dB Output Power: +27.5
More informationFeatures. Parameter Min Typ. Max Min Typ. Max Min Typ Max Units Frequency Range GHz Gain
Typical Applications The HMC82LP4E is ideal for: Point-to-Point Radios Point-to-Multi-Point Radios VSAT & SATCOM Marine Radar Military EW & ECM Functional Diagram Features High Saturated Output Power:
More information