Features. = +25 C, 50 Ohm System, Vcc= +5V
|
|
- Jeffery Manning
- 6 years ago
- Views:
Transcription
1 v Typical Applications Prescaler for DC to 18 GHz PLL Applications: Point-to-Point / Multi-Point Radios VSAT Radios Fiber Optic Test Equipment Military Functional Diagram Features Ultra Low ssb Phase Noise: -15 dbc/hz Very Wide Bandwidth Output Power: - dbm Single DC Supply: +5V 16 Lead 3x3mm QFN Package: 9 mm² General Description Electrical Specifications, T A = +25 C, 5 Ohm System, Vcc= +5V The HMC9LP3 & HMC9LP3E are low noise Divide-by-8 Static Dividers utilizing InGaP GaAs HBT technology packaged in leadless 3x3 mm QFN surface mount plastic packages. This device operates from DC (with a square wave input) to 18 GHz input frequency from a single +5V DC supply. The low additive ssb phase noise of -15 dbc/hz at 1 khz offset helps the user maintain excellent system noise performance. Parameter Conditions Min. Typ. Max. Units Maximum Input Frequency GHz Minimum Input Frequency Sine Wave Input. [1].2.5 GHz Input Power Range Fin = 2 to 12 GHz dbm Fin = 12 to 16 GHz dbm Fin = 16 to 18 GHz dbm Output Power Fin =.5 to 18 GHz -7 - dbm Reverse Leakage Both RF Outputs Terminated 55 db SSB Phase Noise (1 khz offset) Pin = dbm, Fin = 6 GHz -15 dbc/hz Output Transition Time Pin = dbm, Fout = 882 MHz 1 ps Supply Current (Icc1 + Icc2) 13 ma 1. Divider will operate down to DC for square-wave input signal - 1 For price, delivery and to place orders: Hittite Microwave Corporation, For price, delivery, 2 Alpha and Road, to place Chelmsford, orders: Analog MA Devices, 182Inc.,
2 v Input Sensitivity Window, T= 25 C INPUT POWER (dbm) Recommended Operating Window Output Power vs. Temperature OUTPUT POWER (dbm) Output Harmonic Content, Pin= dbm, T= 25 C OUTPUT LEVEL (dbm) C +85C -C Pfeedthru 2nd Harmonic 3rd Harmonic Input Sensitivity Window vs. Temperature INPUT POWER (dbm) Min Pin +25C Max Pin +25C Min Pin +85C Max Pin +85C Min Pin -C Max Pin -C SSB Phase Noise Performance, Pin= dbm, T= 25 C SSB PHASE NOISE (dbc/hz) OFFSET FREQUENCY (Hz) Reverse Leakage, Pin= dbm, T= 25 C OUTPUT LEVEL (dbm) Both Output Ports Terminated One Output Port Terminated For price, delivery and to place orders: Hittite Microwave Corporation, For price, delivery, 2 Alpha and Road, to place Chelmsford, orders: Analog MA Devices, 182Inc., - 2
3 v Output Voltage Waveform, Pin= dbm, Fout= 882 MHz, T= 25 C AMPLITUDE (mv) Outline Drawing TIME (ns) ELECTROSTATIC sensitive Device OBserve HANDLING PRECAutions Package Information Absolute Maximum Ratings RF Input (Vcc = +5V) Supply Voltage (Vcc1, Vcc2) +13 dbm +5.5V Channel Temperature (Tc) 135 C Continuous Pdiss (T = 85 C) (derate 11.9 mw/ C above 85 C) Thermal Resistance (R TH ) (junction to ground paddle) 593 mw 8 C/W Storage Temperature -65 to +15 C Operating Temperature - to +85 C ESD Sensitivity (HBM) Class 1A Typical Supply Current vs. Vcc Vcc1, Vcc2 (V) Icc (ma) Note: Divider will operate over full voltage range shown above NOTES: 1. LEADFRAME MAteriAL: copper ALLOY 2. DIMensions ARE in inches [MILLIMeters] 3. LEAD SPAcinG TOLERAnce is non-cumulative. PAD Burr LENGTH SHALL BE.15mm MAXIMUM. PAD Burr HEIGHT SHALL BE.5mm MAXIMUM. 5. PACKAGE WARP SHALL not EXceeD.5mm. 6. ALL GrounD LEADS AND GrounD PADDLE Must BE soldered TO PCB RF GrounD. 7. refer TO Hittite APPLICAtion note FOR suggested LAND PAttern. Part Number Package Body Material Lead Finish MSL Rating Package Marking [3] [1] 9 HMC9LP3 Low Stress Injection Molded Plastic Sn/Pb Solder MSL1 XXXX [2] 9 HMC9LP3E RoHS-compliant Low Stress Injection Molded Plastic 1% matte Sn MSL1 XXXX [1] Max peak reflow temperature of 235 C [2] Max peak reflow temperature of 26 C [3] -Digit lot number XXXX - 3 For price, delivery and to place orders: Hittite Microwave Corporation, For price, delivery, 2 Alpha and Road, to place Chelmsford, orders: Analog MA Devices, 182Inc.,
4 v Pin Description Pin Number Function Description Interface Schematic 1, -9, 12, 13, 16 N/C No connection. 2 IN RF Input must be DC blocked. 3 IN RF Input 18 out of phase with pin 2 for differential operation. AC ground for single ended operation. 1 OUT Divided Output. 11 OUT Divided output 18 out of phase with pin 1. 1, 15 Vcc1, Vcc2 Supply voltage 5V ±.25V. Connect both pins to +5V supply. GND Ground: Backside of package has exposed metal ground slug which must be connected to RF/DC ground. For price, delivery and to place orders: Hittite Microwave Corporation, For price, delivery, 2 Alpha and Road, to place Chelmsford, orders: Analog MA Devices, 182Inc., -
5 v Evaluation PCB List of Materials for Evaluation PCB 1738 [1] Item J1 - J3 Description J, J5 DC Pin C2 - C5 C6 C1 U1 PCB [2] PCB Mount SMA RF Connector 1 pf Capacitor, 2 Pkg. 1 pf Capacitor, 63 Pkg. 2.2 uf Tantalum Capacitor HMC9LP3 / HMC9LP3E Divide-by Eval Board [1] Reference this number when ordering complete evaluation PCB [2] Circuit Board Material: Rogers 35 The circuit board used in the application should use RF circuit design techniques. Signal lines should have 5 Ohm impedance while the package ground leads and backside ground slug should be connected directly to the ground plane similar to that shown. A sufficient number of via holes should be used to connect the top and bottom ground planes. The evaluation circuit board shown is available from Hittite upon request. This evaluation board is designed for single ended input testing. J2 and J3 provide differential output signals. - 5 For price, delivery and to place orders: Hittite Microwave Corporation, For price, delivery, 2 Alpha and Road, to place Chelmsford, orders: Analog MA Devices, 182Inc.,
6 v Application Circuit For price, delivery and to place orders: Hittite Microwave Corporation, For price, delivery, 2 Alpha and Road, to place Chelmsford, orders: Analog MA Devices, 182Inc., - 6
Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED
Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED www.analog.com www.hittite.com THIS PAGE INTENTIONALLY LEFT BLANK Typical Applications Prescaler for
More informationv Features = +25 C, 50 Ohm System, Vcc = 5V
Typical Applications Prescaler for DC to X band PLL applications: Satellite communication systems Fiber optic Point-to-point and point-to-multi-point radios VSAT Functional Diagram Features Ultra low SSB
More informationHMC437MS8G / 437MS8GE
v5.1211 HMC37MS8G / 37MS8GE Typical Applications Prescaler for DC to C Band PLL Applications: UNII, Point-to-Point & VSAT Radios 82.11a & HiperLAN WLAN Fiber Optic Cellular / 3G Infrastructure Functional
More informationFeatures. = +25 C, Vcc= 5V
v4.21 Typical Applications Active Multiplier for X Band Applications: Fiber Optic Point-to-Point Radios Military Radar Functional Diagram Features Output Power: +4 dbm Sub-Harmonic Suppression: >2 dbc
More informationHMC695LP4 / HMC695LP4E
v.1 Typical Applications The HMC95LP(E) is ideal for: Fiber Optic Applications Point-to-Point Radios Military Radar Functional Diagram Features Output Power: +7 dbm Sub-Harmonic Suppression: >5 dbc SSB
More informationFeatures. = +25 C, 50 Ohm System, Vcc= +3V
v.1 HMC32 / 32E Typical Applications Prescaler for DC to C Band PLL Applications: UNII, Point-to-Point & VSAT Radios 82.11a & HiperLAN WLAN Fiber Optic Cellular / 3G Infrastructure Functional Diagram Features
More informationFeatures. = +25 C, 50 Ohm System, Vcc = 5V. Parameter Conditions Min. Typ. Max. Units. Maximum Input Frequency GHz
v2.1 DIVIDE-BY-, DC - 13 GHz Typical Applications Prescaler for DC to Ku Band PLL Applications: Point-to-Point / Multi-Point Radios VSAT Radios Fiber Optic Test Equipment Space & Military Functional Diagram
More informationFeatures. = +25 C, Vcc = +5V. Parameter Min. Typ. Max. Units Fo Fo/2 RFOUT RFOUT/2
v4.11 HMC5LP5 / 5LP5E OUTPUT 7.3 -.2 GHz Typical Applications Low noise MMIC VCO w/half Frequency, for: VSAT Radio Point to Point/Multi-Point Radio Test Equipment & Industrial Controls Military End-Use
More informationFeatures. = +25 C, Vcc1, Vcc2 = +5V. Parameter Min. Typ. Max. Units Fo Fo/2 RFOUT RFOUT/2 RFOUT/4
v4.11 Typical Applications Low noise MMIC VCO w/half Frequency, Divide-by-4 Outputs for: VSAT Radio Point to Point/Multipoint Radio Test Equipment & Industrial Controls Military End-Use Functional Diagram
More informationFeatures OBSOLETE. = +25 C, 50 Ohm System, Vcc= 3V
Typical Applications Prescaler for DC to 4. GHz PLL Applications: DBS/CATV Tuners 82.11x & HiperLAN WLAN Fixed Wireless & WLL Microwave & VSAT Radios Cellular & 3G Functional Diagram v.93 HMC42MS8 / 42MS8E
More informationFeatures. = +25 C, Vcc1, Vcc2, Vcc3 = +5V. Parameter Min. Typ. Max. Units Frequency Range GHz
Typical Applications Low noise MMIC VCO w/divide-by-16 for: VSAT Radio Point to Point/Multipoint Radio Test Equipment & Industrial Controls Military End-Use Automotive Radar Features Pout: + dbm Phase
More informationHMC705LP4 / HMC705LP4E
Typical Applications Features The HMC75LP4(E) is ideal for: Satellite Communication Systems Point-to-Point Radios Military Applications Sonet Clock Generation Test Equipment Functional Diagram Ultra Low
More informationAnalog Devices Welcomes Hittite Microwave Corporation
Analog Devices Welcomes Hittite Microwave Corporation www.analog.com www.hittite.com THIS PAGE INTENTIONALLY LEFT BLANK v5.121 HMC32 / 32E Typical Applications Prescaler for DC to C band PLL applications:
More informationFeatures OBSOLETE. = +25 C, Vcc= 5V [1]
v.41 Typical Applications The is Ideal for: Microwave Radio & VSAT Military Radios, Radar & ECM Test Instrumentation Functional Diagram Electrical Specifications, T A = + C, Vcc= V [1] Features Output
More informationFeatures. = +25 C, Vcc = +5V. Parameter Min. Typ. Max. Units Fo Fo/2 RFOUT RFOUT/2
Typical Applications Low noise MMIC VCO w/half Frequency, for: VSAT Radio Point to Point/Multi-Point Radio Test Equipment & Industrial Controls Military End-Use Functional Diagram Features Dual Output:
More informationTEL: FAX: HMC3LP / 3LPE v.21 SMT GaAs HBT MMIC x ACTIVE FREQUENCY MULTIPLIER, GHz OUTPUT Evalua
TEL:755-83396822 FAX:755-83376182 E-MAIL: szss2@163.com HMC3LP / 3LPE v.21 SMT GaAs HBT MMIC x ACTIVE FREQUENCY MULTIPLIER, 9.8-11.2 GHz OUTPUT Pin Description Pin Number Function Description Interface
More informationFeatures. = +25 C, Vcc = +3V
Typical Applications Low noise MMIC VCO w/buffer Amplifi er for: VSAT & Microwave Radio Test Equipment & Industrial Controls Military Features Pout: +dbm Phase Noise: -106 dbc/hz @100 khz No External Resonator
More informationFeatures. = +25 C, Vcc1, Vcc2 = +3V. Parameter Min. Typ. Max. Units Fo Fo/2 RFOUT RFOUT/2 RFOUT/4
v4.11 Typical Applications Low noise MMIC VCO w/half Frequency, Divide-by-4 Outputs for: VSAT Radio Point to Point/Multipoint Radio Test Equipment & Industrial Controls Military End-Use Functional Diagram
More informationHMC368LP4 / 368LP4E FREQ. MULTIPLIERS - ACTIVE - SMT. SMT GaAs PHEMT MMIC AMP-DOUBLER-AMP, 9-16 GHz OUTPUT. Typical Applications.
v3.5 Typical Applications Microwave Radios & VSAT Fiber Optic Infrastructure Military Communications & Radar Functional Diagram Features Output Power: +15 dbm Wide Input Power Range: to +1 dbm 1 khz SSB
More informationFeatures. = +25 C, 50 Ohm System, Vcc= 5V
Typical Applications Programmable divider for offset synthesizer and variable divide by N applications: Satellite Communication Systems Point-to-Point and Point-to-Multi-Point Radios LMDS SONET Functional
More informationFeatures OBSOLETE. = +25 C, Vcc1 = Vcc2 = +5V
v3.121.1-15 GHz LOW NOISE PROGRAMMABLE DIVIDER (N = 1, 2,, 8) Typical Applications The is ideal for: Satellite Communication Systems Point-to-Point & Point-to-Multi-Point Radios Military Applications Test
More informationFeatures. = +25 C, Vcc (Dig), Vcc (Amp), Vcc (RF) = +5V. Parameter Min. Typ. Max. Units Fo Fo/2 RFOUT RFOUT/2 RFOUT/4
HMC54LP5 / 54LP5E Typical Applications Low noise MMIC VCO w/half Frequency, Divide-by-4 Outputs for: Point to Point/Multipoint Radio Test Equipment & Industrial Controls SATCOM Military End-Use Functional
More informationFeatures. Output Power: 2 dbm Typical Spurious Suppression: >20 dbc SSB Phase Noise: khz Offset Test Instrumentation
Typical Applications The is Ideal for: Microwave Radio & VSAT Military Radios, Radar & ECM Features Output Power: dbm Typical Spurious Suppression: > dbc SSB Phase Noise: -148 dbc/hz @ 1 khz Offset Test
More informationFeatures. = +25 C, Vcc(RF), Vcc(DIG) = +5V
& DIVIDE-BY-16, 23. - 26. GHz Typical Applications The HMC739LP4(E) is ideal for: Point-to-Point Radios Point-to-Multi-Point Radios / LMDS VSAT Features Pout: + dbm Phase Noise: -93 dbc/hz @ 100 khz Typ.
More informationFeatures. = +25 C, Vcc = +3V
Typical Applications Low noise MMIC VCO w/buffer Amplifi er for: Wireless Local Loop (WLL) VSAT & Microwave Radio Test Equipment & Industrial Controls Military Features Pout: +4.9 dbm Phase Noise: -3 dbc/hz
More informationFeatures. = +25 C, Vcc (Dig), Vcc (Amp), Vcc (RF) = +5V. Parameter Min. Typ. Max. Units Fo Fo/4 RFOUT RFOUT/4
.6-10.2 GHz Typical Applications The HMC734LP5(E) is ideal for: Point-to-Point/Multi-Point Radio Test Equipment & Industrial Controls SATCOM Military End-Use Functional Diagram Features Dual Output: Fo
More informationFeatures. = +25 C, Vdd = +5V, 5 dbm Drive Level
v1.4 Typical Applications The HMC561LP3E are suitable for: Clock Generation Applications: SONET OC-192 & SDH STM-64 Point-to-Point & VSAT Radios Test Instrumentation Military & Space Functional Diagram
More informationHMC705LP4 / HMC705LP4E
HMC75LP4 / HMC75LP4E v4.212 Typical Applications Features The HMC75LP4(E) is ideal for: Satellite Communication Systems Point-to-Point Radios Military Applications Sonet Clock Generation Test Equipment
More informationFrequency vs. Tuning Voltage, Vcc = +4.2V 17 Frequency vs. Tuning Voltage, T= 25 C FREQUENCY (GHz) FREQUENCY (GHz) Vcc = 4.
Typical Applications The HMC736LP4(E) is ideal for: Point to Point/Multipoint Radio Test Equipment & Industrial Controls SATCOM Military End-Use Functional Diagram Features Dual Output: Fo = Fo/2 = 7.25-7.5
More informationFeatures. = +25 C, 50 Ohm System, Vcc= 5V
Typical Applications Prescaler for 1 MHz to 13 GHz PLL Applications: Point-to-Point / Multi-Point Radios VSAT Radios Fiber Optic Test Equipment Space & Military Functional Diagram Features Ultra Low ssb
More informationOBSOLETE HMC915LP4E. GaAs MMIC MIXER w/ INTEGRATED LO AMPLIFIER, GHz. Typical Applications. Features. Functional Diagram. General Description
v1.5 LO AMPLIFIER,.5-2.7 GHz Typical Applications The is ideal for: PCS / 3G Infrastructure Base Stations & Repeaters WiMAX & WiBro ISM & Fixed Wireless Functional Diagram Features Input IP3: +28 dbm Low
More informationFeatures. = +25 C, Vdd= 5V. Parameter Min. Typ. Max. Min. Typ. Max. Min. Typ. Max. Units. Frequency Range GHz
Typical Applications The HMC62LP / HMC62LPE Wideband LNA is ideal for: Telecom Infrastructure Microwave Radio & VSAT Military EW, ECM & C 3 I Test Instrumentation Fiber Optics Functional Diagram Features
More informationHMC948LP3E POWER DETECTORS - SMT. 54 db, LOGARITHMIC DETECTOR, 1-23 GHz. Typical Applications. Features. Functional Diagram. General Description
v.9 HMC948LPE DETECTOR, - GHz Typical Applications The HMC948LPE is ideal for: Point-to-Point Microwave Radio VSAT Wideband Power Monitoring Receiver Signal Strength Indication (RSSI) Test & Measurement
More informationFeatures OBSOLETE. = +25 C, 50 Ohm System GHz degrees Insertion Loss 6-15 GHz 8 11 db. Return Loss (Input and Output) 6-15 GHz 7 db
v2.29 6 ANALOG PHASE SHIFTER, 1 Typical Applications The HMC538LP4 / HMC538LP4E is ideal for: Fiber Optics Military Test Equipment Functional Diagram Features Electrical Specifications, T A = +25 C, 5
More informationFrequency vs. Tuning Voltage, Vcc = +5V OUTPUT FREQUENCY (GHz) Frequency vs. Tuning Voltage, T= 25 C OUTPUT F
Typical Applications The HMC734LP5(E) is ideal for: Point-to-Point/Multi-Point Radio Test Equipment & Industrial Controls SATCOM Military End-Use Functional Diagram Features Dual Output: Fo = Fo/4 = 2.15-2.55
More information= +25 C, Vcc = +3.3V, Z o = 50Ω (Continued)
v1.1 HMC9LP3E Typical Applications The HMC9LP3E is ideal for: LO Generation with Low Noise Floor Software Defined Radios Clock Generators Fast Switching Synthesizers Military Applications Test Equipment
More informationFeatures. Parameter Frequency (GHz) Min. Typ. Max. Units GHz GHz GHz. Attenuation Range GHz 15.
v.91.5 db LSB GaAs MMIC 5-BIT DIGITAL ATTENUATOR,.1-33 GHz Typical Applications The HMC941LP4 / HMC941LP4E is ideal for: Fiber Optics & Broadband Telecom Microwave Radio & VSAT Military Radios, Radar &
More informationFeatures OBSOLETE. = +25 C, Rbias = 0 Ohm. Bypass Mode Failsafe Mode Parameter
7 Typical Applications The HMC668LP3(E) is ideal for: Cellular/3G and LTE/WiMAX/4G BTS & Infrastructure Repeaters and Femtocells Tower Mounted Amplifiers Test & Measurement Equipment Functional Diagram
More informationFeatures. = +25 C, Vcc = +8V
v2.19 HMC5LP3 / 5LP3E Typical Applications The HMC5LP3(E) is ideal for: Wireless Infrastructure HPA & MCPA Error Correction Pre-Distortion or Feed-Forward Linearization PCS, GSM and W-CDMA Systems Beam
More informationFeatures. = +25 C, Vdd= +12V, Vgg2= +5V, Idd= 400 ma*
Typical Applications The HMC637LP5(E) wideband PA is ideal for: Features P1dB Output Power: +29 dbm Telecom Infrastructure Microwave Radio & VSAT Military & Space Test Instrumentation Fiber Optics Functional
More information7 GHz INTEGER N SYNTHESIZER CONTINUOUS (N = ), NON-CONTINUOUS (N = 16-54) Features
HMC99LP5 / 99LP5E CONTINUOUS (N = 5-519), NON-CONTINUOUS (N = 1-54) Typical Applications The HMC99LP5(E) is ideal for: Satellite Communication Systems Point-to-Point Radios Military Applications Sonet
More informationFeatures. = +25 C, 50 Ohm System, Vcc= 5V
v1.71 HMC6S8G DIVIDE-BY-8, DC - 12. GHz Typical Applications Prescaler for DC to X Band PLL Applications: Satellite Communication Systems Fiber Optic Pt-Pt and Pt-MPt Radios VSAT Functional Diagram Features
More informationHMC662LP3E POWER DETECTORS - SMT. 54 db, LOGARITHMIC DETECTOR, 8-30 GHz. Typical Applications. Features. Functional Diagram. General Description
Typical Applications The is ideal for: Point-to-Point Microwave Radio VSAT Wideband Power Monitoring Receiver Signal Strength Indication (RSSI) Test & Measurement Functional Diagram Features Wide Input
More informationFeatures. = +25 C, Vcc (Dig), Vcc (Amp), Vcc (RF) = +5V
Typical Applications The HMC734LP5(E) is ideal for: Point-to-Point/Multi-Point Radio Test Equipment & Industrial Controls SATCOM Military End-Use Functional Diagram Features Dual Output: Fo = Fo/4 = 2.15-2.55
More informationHMC694LP4 / 694LP4E. Variable gain amplifiers - ANALOG - smt. GaAs MMIC ANALOG VARIABLE GAIN AMPLIFIER, 6-17 GHz. Typical Applications
v2.1 Typical Applications The HMC694LP4(E) is ideal for: Point-to-Point Radio Point-to-Multi-Point Radio EW & ECM X-Band Radar Test Equipment Features Wide Gain Control Range: 23 db Single Control Voltage
More informationFeatures. Pout: +9 dbm. Parameter Min. Typ. Max. Units
Typical Applications Phase-Locked Oscillator for: SAT Radio Point-to-Point & Point-to-Multi-Point Radio Test Equipment & Industrial Controls Military End-Use Functional Diagram Features Pout: +9 dbm Phase
More informationHMC486LP5 / 486LP5E LINEAR & POWER AMPLIFIERS - SMT. SURFACE MOUNT PHEMT 2 WATT POWER AMPLIFIER, 7-9 GHz. Typical Applications.
v2. Typical Applications The HMC486LP5(E) is ideal for: Point-to-Point Radios Point-to-Multi-Point Radios Test Equipment and Sensors Military End-Use Features Saturated Power: +33 dbm @ 2% PAE Output IP3:
More informationFeatures OBSOLETE. = +25 C, With 0/+5V Control, 50 Ohm System. Parameter Frequency Min. Typ. Max. Units
v5.85 Typical Applications Features The HMC348LP3 / HMC348LP3E is ideal for: 75 Ohm Systems CATV Signal Distribution, Cable Modem Headend & DBS IF Switching 5 Ohm Systems Basestation Infrastructure & Test
More informationAnalog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED
Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED www.analog.com www.hittite.com THIS PAGE INTENTIONALLY LEFT BLANK Typical Applications The HMC652LP2E
More informationAnalog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED
Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED www.analog.com www.hittite.com THIS PAGE INTENTIONALLY LEFT BLANK v3.38 POWER AMPLIFIER, 2-2 GHz Typical
More informationOBSOLETE. = +25 C, With Vdd = +5V & Vctl = 0/+5V. Parameter Frequency Min. Typ. Max. Units DC - 4 GHz GHz Attenuation Range DC - 10 GHz 10 db
Typical Applications The HMC8LP3E is ideal for: Test Equipment and Sensors ISM, MMDS, WLAN, WiMAX, WiBro Microwave Radio & VSAT Cellular Infrastructure Functional Diagram HMC8LP3E v.11 1 GaAs MMIC 1-BIT
More informationHMC1013LP4E. SDLVAs - SMT. SUCCESSIVE DETECTION LOG VIDEO AMPLIFIER (SDLVA), GHz
v.9 HMCLPE AMPLIFIER (SDLVA),.5-8.5 GHz Typical Applications The HMCLPE is ideal for: EW, ELINT & IFM Receivers DF Radar Systems ECM Systems Broadband Test & Measurement Power Measurement & Control Circuits
More informationFeatures OBSOLETE. = +25 C, 50 Ohm system, Vdd = +5V. Parameter Frequency Min. Typ. Max. Units GHz
Typical Applications v.91 ATTENUATOR,.5-6. GHz Features The is ideal for: Point-to-Point Radio Cellular/3G & WiMAX/4G Infrastructure Test Instrumentation Microwave Sensors Military, ECM & Radar Functional
More informationHMC656LP2E TO HMC658LP2E v
Typical Applications The HMC656LP2E - HMC65LP2E are ideal for: Fiber Optics Microwave Radio Military & Space Test & Measurement Scientifi c Instruments RF / Microwave Circuit Prototyping Features 3 Attenuator
More informationFeatures. = +25 C, Vcc = +3.3V, Z o = 50Ω
Typical Applications The is ideal for: LO Generation with Low Noise Floor Software Defined Radios Clock Generators Fast Switching Synthesizers Military Applications Test Equipment Sensors Functional Diagram
More informationHMC600LP4 / 600LP4E POWER DETECTORS - SMT. 75 db LOGARITHMIC DETECTOR / CONTROLLER MHz. Features. Typical Applications. General Description
v.99 HMC6LP4 / 6LP4E 7 db LOGARITHMIC DETECTOR / CONTROLLER - 4 MHz Typical Applications The HMC6LP4 / HMC6LP4E is ideal for IF and RF applications in: Cellular/PCS/G WiMAX, WiBro & Fixed Wireless Power
More informationAnalog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED
Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED www.analog.com www.hittite.com THIS PAGE INTENTIONALLY LEFT BLANK v2.65 HMC455LP3 / 455LP3E Typical
More informationParameter Min. Typ. Max. Units Frequency Range GHz
v.312 27-31. GHz Typical Applications The is ideal for: Point-to-Point Radio Point-to-Multi-Point Radio EW & ECM Subsystems Ka-Band Radar & VSAT Test Equipment Functional Diagram Features Wide Gain Control
More informationGain Control Range db
v1.112-12 GHz Typical Applications The is ideal for: Point-to-Point Radio Point-to-Multi-Point Radio EW & ECM Subsystems X-Band Radar Test Equipment & Sensors Functional Diagram Features Wide Gain Control
More informationOBSOLETE. Parameter Frequency (GHz) Min. Typ. Max. Units DC GHz GHz. Attenuation Range DC - 3 GHz 31 db
5 Typical Applications The HMC47LP3(E) is ideal for: Cellular; UMTS/3G Infrastructure ISM, MMDS, WLAN, WiMAX Microwave Radio & VSAT Test Equipment and Sensors Functional Diagram HMC47LP3 / 47LP3E v4.118
More informationFeatures. = +25 C, 50 Ohm system
v6.312 Typical Applications Features The E is ideal for: Point-to-Point Radio VSAT Radio Test Instrumentation Microwave Sensors Military, ECM & Radar Functional Diagram Wide Bandwidth: 5-26.5 GHz Excellent
More informationHMC601LP4 / 601LP4E POWER DETECTORS - SMT. 75 db, FAST SETTLING, LOGARITHMIC DETECTOR / CONTROLLER MHz. Typical Applications.
v.9 HMC6LP4 / 6LP4E 7 db, FAST SETTLING, LOGARITHMIC DETECTOR / CONTROLLER - 4 MHz Typical Applications The HMC6LP4(E) is ideal for IF and RF applications in: Cellular/PCS/G WiMAX, WiBro & Fixed Wireless
More informationFeatures. = +25 C, Vcc = +5V
Typical Applications Low noise wideband MMIC VCO for applications such as: Industrial/Medical Equipment Test & Measurement Equipment Military Radar, EW & ECM Functional Diagram Features Wide Tuning Bandwidth
More informationParameter Frequency (GHz) Min. Typ. Max. Units DC GHz GHz GHz GHz Attenuation Range DC - 5.
5 Typical Applications HMC54LP3 / 54LP3E v.65 1 LSB GaAs MMIC 4-BIT DIGITAL Features The HMC54LP3 / HMC54LP3E is ideal for both RF and IF applications: Cellular Infrastructure ISM, MMDS, WLAN, WiMAX, WiBro
More informationOBSOLETE. Parameter Frequency (GHz) Min. Typ. Max. Units DC GHz GHz GHz Attenuation Range DC - 5.
5 Typical Applications HMC54LP3 / 54LP3E v.65 1 LSB GaAs MMIC 4-BIT DIGITAL Features The HMC54LP3 / HMC54LP3E is ideal for both RF and IF applications: Cellular Infrastructure ISM, MMDS, WLAN, WiMAX, WiBro
More informationOBSOLETE HMC881LP5E FILTERS - TUNABLE - SMT. FILTER - TUNABLE, LOW PASS SMT GHz. Typical Applications. General Description. Functional Diagram
Typical Applications The is ideal for: Test & Measurement Equipment Military RADAR & EW/ECM SATCOM & Space Industrial & Medical Equipment Functional Diagram v1.11 Electrical Specifications, T A = +25 C
More informationFeatures OBSOLETE. = +25 C, With 0/+5V Control, 50 Ohm System
Typical Applications This switch is suitable for usage in 50- Ohm or 75-Ohm systems: Broadband Fiber Optics Switched Filter Banks Wireless below 8 GHz Functional Diagram Features Broadband Performance:
More informationFeatures OBSOLETE. LO Port Return Loss db RF Port Return Loss db
v4.18 MODULATOR RFIC, - 4 MHz Typical Applications The HMC497LP4(E) is ideal for: UMTS, GSM or CDMA Basestations Fixed Wireless or WLL ISM Transceivers, 9 & 24 MHz GMSK, QPSK, QAM, SSB Modulators Functional
More informationFeatures. = +25 C, Vcc = +5V, Z o = 50Ω, Bias1 = GND
v1.612 Typical Applications The is ideal for: LO Generation with Low Noise Floor Clock Generators Mixer LO Drive Military Applications Test Equipment Sensors Functional Diagram Features Low Noise Floor:
More informationFeatures. = +25 C, Vdd = +5V, Rbias = 10 Ohms*
Typical Applications Functional Diagram The HMC36LP3 / HMC36LP3E is ideal for: Cellular/3G Infrastructure Base Stations & Repeaters CDMA, W-CDMA, & TD-SCDMA Private Land Mobile Radio GSM/GPRS & EDGE UHF
More informationFeatures. = +25 C, Vdd = +7V, Idd = 1340 ma [1]
Typical Applications The HMC591LP5 / HMC591LP5E is ideal for use as a power amplifi er for: Point-to-Point Radios Point-to-Multi-Point Radios Test Equipment & Sensors Military End-Use Space Features Saturated
More informationFeatures OBSOLETE. Saturated Output Power (Psat) dbm Output Third Order Intercept (IP3) dbm Supply Current (Idd) ma
7 Typical Applications The HMC667LP2(E) is ideal for: WiMAX, WiBro & Fixed Wireless SDARS & WLAN Receivers Infrastructure & Repeaters Access Points Telematics & DMB Functional Diagram v2.11 Electrical
More informationAnalog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED
Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED www.analog.com www.hittite.com THIS PAGE INTENTIONALLY LEFT BLANK v3.1211 45 Analog Phase Shifter,
More informationFeatures OBSOLETE. = +25 C, Vcc1, Vcc2 = +5.0V. Parameter Min. Typ. Max. Units Frequency Range GHz. Divided Output
v3.81 Typical Applications Low noise MMIC VCO w/divide-by-8 for Ku-Band applications such as: Point-to-Point Radios Point-to-Multi-Point Radios / LMDS VSAT Functional Diagram Features Electrical Specifications,
More informationHMC349LP4C / 349LP4CE
Typical Applications The HMC349LP4C / HMC349LP4CE is ideal for: Basestation Infrastructure MMDS & 3.5 GHz WLL CATV/CMTS Test Instrumentation Functional Diagram Features High Isolation: 67 @ 1 GHz 62 @
More informationHMC358MS8G / 358MS8GE
Typical Applications Low noise MMIC VCO w/buffer Amplifi er for C-Band applications such as: UNII & Pt. to Pt. Radios 802.a & HiperLAN WLAN VSAT Radios Features Pout: + dbm Phase Noise: -0 dbc/hz @100
More information= +25 C, 50 Ohm System, Vdd = +5V
v3.69 HMC68LP4 / 68LP4E VARIABLE GAIN AMPLIFIER, 3-4 MHz Variable gain amplifiers - digital - SMT Typical Applications The HMC68lp4(E) is ideal for: Cellular/3G Infrastructure WiBro / WimaX / 4G Microwave
More informationHMC602LP4 / 602LP4E POWER DETECTORS - SMT. 70 db, LOGARITHMIC DETECTOR / CONTROLLER, MHz
v3.9 HMC6LP / 6LPE 7 db, LOGARITHMIC DETECTOR / CONTROLLER, 1-8 MHz 1 Typical Applications The HMC6LP(E) is ideal for IF and RF applications in: Cellular/PCS/3G WiMAX, WiBro, WLAN, Fixed Wireless & Radar
More informationSURFACE MOUNT PHEMT 2 WATT POWER AMPLIFIER,
v2.617 AMPLIFIER, - 12 GHz Typical Applications The is ideal for use as a power amplifier for: Point-to-Point Radios Point-to-Multi-Point Radios Test Equipment and Sensors Military End-Use Features Saturated
More informationHMC1040LP3CE. Amplifiers - Low Noise - smt. GaAs phemt MMIC LOW NOISE AMPLIFIER, GHz. Features. Typical Applications. General Description
v.112 HMC14LP3CE AMPLIFIER, 24-43. GHz Typical Applications This HMC14LP3BE is ideal for: Point-to-Point Radios Test Instrumentation SatCom Transponders & VSAT Industrial Sensors EW & ECM Subsystems Functional
More informationFeatures. Upconversion & Downconversion Applications MIXERS - SINGLE & DOUBLE BALANCED - SMT
v1. Typical Applications The HMC688LP4(E) is Ideal for: Cellular/3G & LTE/WiMAX/4G Basestations & Repeaters GSM, CDMA & OFDM Transmitters and Receivers Features High Input IP3: +35 dbm Low Conversion Loss:
More informationAnalog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED
Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED www.analog.com www.hittite.com THIS PAGE INTENTIONALLY LEFT BLANK Typical Applications Low noise wideband
More informationHMC602LP4 / 602LP4E POWER DETECTORS - SMT. 70 db, LOGARITHMIC DETECTOR / CONTROLLER, MHz
v3.9 HMC6LP / 6LPE 7 db, LOGARITHMIC DETECTOR / CONTROLLER, 1-8 MHz 1 Typical Applications The HMC6LP(E) is ideal for IF and RF applications in: Cellular/PCS/3G WiMAX, WiBro, WLAN, Fixed Wireless & Radar
More informationHMC468LP3 / 468LP3E v
Typical Applications 1 LSB GaAs MMIC 3-BIT DIGITAL Features The HMC468LP3 / HMC468LP3E is ideal for: Cellular; UMTS/3G Infrastructure Fixed Wireless & WLL Microwave Radio & VSAT Test Equipment Functional
More informationv3.99 Attenuation vs. Frequency over Vctrl V -1.6 V -.6 V. V Attenuation vs. Vctrl1 Over 1 GHz, Vctrl2
5 TEL:755-83396822 FAX:755-83376182 E-MAIL: szss2@163.com Typical Applications v3.99 Features The is ideal for: Point-to-Point Radio VSAT Radio Test Instrumentation Microwave Sensors Military, ECM & Radar
More informationFeatures db
v1.19 DETECTOR / CONTROLLER, 5-8 MHz Power Detectors - SMT Typical Applications The is ideal for: Cellular Infrastructure WiMAX, WiBro & LTE/G Power Monitoring & Control Circuitry Receiver Signal Strength
More informationFeatures. = +25 C, IF = 200 MHz, LO = 0 dbm, Vcc = Vcc1, 2, 3 = +5V, G_Bias = +2.5V*
v4.1 Typical Applications The HMC685LP4(E) is Ideal for: Cellular/3G & LTE/WiMAX/4G Basestations & Repeaters GSM, CDMA & OFDM Transmitters and Receivers Features High Input IP3: +35 dbm 8 db Conversion
More informationHMC662LP3E POWER DETECTORS - SMT. 54 db, LOGARITHMIC DETECTOR, 8-30 GHz. Typical Applications. Features. Functional Diagram. General Description
v5.94 HMC66LPE DETECTOR, 8 - GHz Typical Applications The HMC66LPE is ideal for: Point-to-Point Microwave Radio VSAT Wideband Power Monitoring Receiver Signal Strength Indication (RSSI) Test & Measurement
More information= +25 C, Vdd = Vs= P/S= +5V
v3. HMC68LP5 / 68LP5E.5 db LSB GaAs MMIC 6-BIT DIGITAL VARIABLE GAIN AMPLIFIER w/ SERIAL CONTROL, DC - GHz Variable gain amplifiers - digital - SMT Typical Applications The HMC68LP5(E) is ideal for: IF
More informationParameter Min. Typ. Max. Units
v4.112 Typical Applications The is ideal for: Point-to-Point and Point-to-Multi-Point Radio Military Radar, EW & ELINT Satellite Communications Functional Diagram Features General Description The is a
More informationFeatures. = +25 C, Vdd1 = Vdd2 = +3.5V, Idd = 80 ma [2]
Typical Applications This is ideal for: Features Low Noise Figure: 1.8 db Point-to-Point Radios Point-to-Multi-Point Radios Military & Space Test Instrumentation Functional Diagram High Gain: 19 db High
More informationFeatures. Upconversion & Downconversion Applications MIXERS - SINGLE & DOUBLE BALANCED - SMT
v1. Typical Applications The HMC689LP4(E) is Ideal for: Cellular/3G & LTE/WiMAX/4G Basestations & Repeaters GSM, CDMA & OFDM Transmitters and Receivers Features High Input IP3: +32 dbm Low Conversion Loss:
More informationFeatures. = +25 C, With 0/+5V Control, 50 Ohm System
Typical Applications This switch is suitable for usage in 50- Ohm or 75-Ohm systems: Broadband Fiber Optics Switched Filter Banks Wireless below 8 GHz Features Broadband Performance: DC - 8 GHz High Isolation:
More informationHMC542LP4 / 542LP4E v
5 Typical Applications The HMC542LP4 / HMC542LP4E is ideal for both RF and IF applications: Cellular/PCS/3G Infrastructure ISM, MMDS, WLAN, WiMAX, & WiBro Microwave Radio & VSAT Test Equipment and Sensors
More informationAnalog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED
Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED www.analog.com www.hittite.com THIS PAGE INTENTIONALLY LEFT BLANK 5 Typical Applications The HMC472LP4(E)
More information= +25 C, With Vee = -5V & VCTL= 0/-5V
v.3.5db LSB GaAs MMIC 6-BIT DIGITAL Typical Applications Features The is ideal for: Basestation Infrastructure Fiber Optics & Broadband Telecom Microwave & VSAT Radios Military & Space Test Instrumentation
More informationFeatures. = +25 C, With 0/-5V Control, 50 Ohm System. Parameter Frequency Min. Typ. Max. Units DC GHz
Typical Applications This switch is suitable for usage in 50- Ohm or 75-Ohm systems: Broadband Fiber Optics Switched Filter Banks Wireless below 8 GHz Functional Diagram Features Broadband Performance:
More informationHMC612LP4 / 612LP4E v
HMC6LP4 / 6LP4E v.8 DETECTOR / CONTROLLER, 5 Hz - MHz Typical Applications Features The HMC6LP4(E) is ideal for IF and RF applications in: Cellular/PCS/G WiMAX, WiBro, WLAN, Fixed Wireless & Radar Power
More informationOBSOLETE HMC894LP5E FILTERS - TUNABLE - SMT. FILTER - TUNABLE, BAND PASS SMT GHz. Typical Applications. General Description
Typical Applications The is ideal for: Test & Measurement Equipment Military RADAR & EW/ECM SATCOM & Space Industrial & Medical Equipment Functional Diagram v.11 Features General Description Fast Tuning
More informationFeatures. = +25 C, Vcc = +5V. Parameter Min. Typ. Max. Units Frequency Range GHz Power Output 3 dbm SSB Phase 10 khz Offset -60 dbc/hz
Typical Applications Low Noise wideband MMIC VCO is ideal for: Industrial/Medical Equipment Test & Measurement Equipment Military Radar, EW & ECM Functional Diagram Features Wide Tuning Bandwidth Pout:
More information