HMC1013LP4E. SDLVAs - SMT. SUCCESSIVE DETECTION LOG VIDEO AMPLIFIER (SDLVA), GHz

Transcription

1 v.9 HMCLPE AMPLIFIER (SDLVA), GHz Typical Applications The HMCLPE is ideal for: EW, ELINT & IFM Receivers DF Radar Systems ECM Systems Broadband Test & Measurement Power Measurement & Control Circuits Military & Space Applications Functional Diagram Features High Logging Range: 67 db (-6 to +5 dbm) Output Frequency Flatness: ± db Log Linearity: ± db Fast Rise/Fall Times: 5/5 ns Single Positive Supply: +.V ESD Sensitivity (HBM): Class A Lead xmm SMT Package: 6mm General Description The HMCLPE is a Successive Detection Log Video Amplifier which operates from.5 to 8.5 GHz. The HMCLPE provides a logging range of 67 db. This device offers typical fast rise/fall times of 5/5 ns and a superior delay time of only ns. The HMCLPE log video output slope is typically 5 mv/db. Maximum recovery times are less than ns. The HMCLPE is available in a highly compact x mm SMT plastic package and is ideal for high speed channelized receiver applications. Electrical Specifications, T A = +5 C Vcc = Vcc = Vcc= +.V, EN=.V Parameter Conditions Typ. Units Input Frequency Range [] GHz Frequency Flatness ± db Log Linearity Pin = -6 to +5 dbm ± db Log Linearity over Temperature ± db Minimum Logging Range to ± db error -6 dbm Maximum Logging Range to ± db error +5 dbm Input Return Loss 8 db Log Video Minimum Output Voltage.9 V Log Video Maximum Output Voltage.9 V Log Video Output Rise Time % to 9% 5 ns Log Video Output Fall Time 9% to % 5 ns Log Video Recovery GHz 8 ns Log Video Output Slope 5 mv/db Log Video Output Slope Variation over GHz 6. µv/db C Log Video Propagation Delay ns Supply Current (Icc) 7 ma Supply Current (Icc) 9 ma Supply Current (Icc) 86 ma [] Video output load should be K Ohm or higher. For price, delivery and to place orders: Hittite Microwave Corporation, For price, delivery, Elizabeth and to Drive, place Chelmsford, orders: Analog MA Devices, 8 Inc., One Technology Way, P.O. Box 96, Norwood, MA 6-96 Phone: Fax: Phone: Order On-line at Application Support: Phone: Application or apps@hittite.com Support: Phone: -8-ANALOG-D

2 v.9 HMCLPE AMPLIFIER (SDLVA), GHz Error Flatness vs. VIDEO Input Power Over Frequency [] [] OUT & Error vs. Input Power, Fin = 5 MHz GHz GHz 6 GHz GHz GHz 8 GHz ERR +5C ERR -C Video Out +5C Video Out -C vs. Input Power, Fin = GHz vs. Input Power, Fin = GHz.8.6 ERR +5C ERR -C.8.6 ERR +5C ERR -C Video Out +5C Video Out -C Video Out +5C Video Out -C vs. Input Power, Fin = 6 GHz vs. Input Power, Fin = GHz.8.6 ERR +5C ERR -C.8.6 ERR +5C ERR -C Video Out +5C Video Out -C Video Out +5C Video Out -C [] An average ideal line is used to calculate error curves. [] At 5 C. For price, delivery and to place orders: Hittite Microwave Corporation, For price, delivery, Elizabeth and to Drive, place Chelmsford, orders: Analog MA Devices, 8 Inc., One Technology Way, P.O. Box 96, Norwood, MA 6-96 Phone: Fax: Phone: Order On-line at Application Support: Phone: Application or apps@hittite.com Support: Phone: -8-ANALOG-D

3 v.9 HMCLPE AMPLIFIER (SDLVA), GHz vs. Input Power, Fin = GHz vs. Input Power, Fin = 8 GHz ERR +5C ERR -C Video Out +5C Video Out -C ERR +5C ERR -C Video Out +5C Video Out -C vs. Input Power, Fin = GHz.8.6 ERR +5C ERR -C...6. Video Out +5C Video Out -C VIDEO OUT vs. Frequency Over Input Power & Temperature.8.7 VIDEO OUT vs. Frequency Over Input Power & Bias Voltage dbm.6 - dbm dbm dbm. - dbm +5C. +85C -C FREQUENCY (GHz). - dbm.5v..v.5v FREQUENCY (GHz) For price, delivery and to place orders: Hittite Microwave Corporation, For price, delivery, Elizabeth and to Drive, place Chelmsford, orders: Analog MA Devices, 8 Inc., One Technology Way, P.O. Box 96, Norwood, MA 6-96 Phone: Fax: Phone: Order On-line at Application Support: Phone: Application or apps@hittite.com Support: Phone: -8-ANALOG-D

4 v.9 Fall Time for Various dbm. HMCLPE AMPLIFIER (SDLVA), GHz Rise Time for Various dbm GHz GHz 8 GHz TIME (ns) GHz GHz 8 GHz 5 TIME (ns) Input Return Loss vs. Frequency INPUT RETURN LOSS (db) C +85C -C FREQUENCY (GHz) Absolute Maximum Ratings Vcc Enable RF Input Power +.6V +.6V + dbm Junction Temperature 5 C Continuous Pdiss (T=85 C) Derate 5. mw/ C above 85 C. W Thermal Resistance (R th ) (junction to package bottom) 8. C/W Storage Temperature -65 to +5 C Operating Temperature - to +85 C ESD Sensitivity (HBM) Class A ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS For price, delivery and to place orders: Hittite Microwave Corporation, For price, delivery, Elizabeth and to Drive, place Chelmsford, orders: Analog MA Devices, 8 Inc., One Technology Way, P.O. Box 96, Norwood, MA 6-96 Phone: Fax: Phone: Order On-line at Application Support: Phone: Application or apps@hittite.com Support: Phone: -8-ANALOG-D

5 v.9 HMCLPE AMPLIFIER (SDLVA), GHz Outline Drawing NOTES:. PACKAGE BODY MATERIAL: LOW STRESS INJECTION MOLDED PLASTIC SILICA AND SILICON IMPREGNATED.. LEAD AND GROUND PADDLE MATERIAL: COPPER ALLOY.. LEAD AND GROUND PADDLE PLATING: % MATTE TIN. DIMENSIONS ARE IN INCHES [MILLIMETERS]. 5. LEAD SPACING TOLERANCE IS NON-CUMULATIVE. 6. CHARACTERS TO BE HELVETICA MEDIUM,.5 HIGH, WHITE INK, OR LASER MARK LOCATED APPROX. AS SHOWN. 7. PAD BURR LENGTH SHALL BE.5mm MAX. PAD BURR HEIGHT SHALL BE.5mm MAX. 8. PACKAGE WARP SHALL NOT EXCEED.5mm 9. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED TO PCB RF GROUND.. REFER TO HITTITE APPLICATION NOTE FOR SUGGESTED PCB LAND PATTERN Package Information Part Number Package Body Material Lead Finish MSL Rating Package Marking [] [] H HMCLPE RoHS-compliant Low Stress Injection Molded Plastic % matte Sn MSL XXXX [] -Digit lot number XXXX [] Max peak reflow temperature of 6 C 5 For price, delivery and to place orders: Hittite Microwave Corporation, For price, delivery, Elizabeth and to Drive, place Chelmsford, orders: Analog MA Devices, 8 Inc., One Technology Way, P.O. Box 96, Norwood, MA 6-96 Phone: Fax: Phone: Order On-line at Application Support: Phone: Application or apps@hittite.com Support: Phone: -8-ANALOG-D

6 v.9 HMCLPE AMPLIFIER (SDLVA), GHz Pin Descriptions Pin Number Function Description Interface Schematic -, 7, 9-, -, 6, 8-9,, N/C, 5-6, 8, GND The pins are not connected internally; however, all data shown herein was measured with these pins connected to RF/DC ground externally. These pins and the exposed package bottom must be connected to a high quality RF/DC ground. RFIN RF Input pin, 5 VIDEO_FB VIDEO_OUT Video out and feedback. These pins should be shorted to each other (see application circuit). Video out load should be at least K Ohm or higher. 7 EN Enable pin, connect to.v supply for normal operation. Total supply current reduced to less than ma when EN is set to V. VCC Bias Supply. Connect supply voltage to these pins with appropriate filtering. See application circuit To ensure proper start-up supply rise time should be faster than usec. For price, delivery and to place orders: Hittite Microwave Corporation, For price, delivery, Elizabeth and to Drive, place Chelmsford, orders: Analog MA Devices, 8 Inc., One Technology Way, P.O. Box 96, Norwood, MA 6-96 Phone: Fax: Phone: Order On-line at Application Support: Phone: Application or apps@hittite.com Support: Phone: -8-ANALOG-D 6

7 v.9 HMCLPE AMPLIFIER (SDLVA), GHz Pin Descriptions (continued) Pin Number Function Description Interface Schematic, VCC, VCC Bias Supply. Connect Supply Voltage to these pins with appropriate filtering. Connect Vcc with Vcc. See application circuit. To ensure proper start-up supply rise time should be faster than usec. Application Circuit Note: Video output load should be K Ohm or higher. 7 For price, delivery and to place orders: Hittite Microwave Corporation, For price, delivery, Elizabeth and to Drive, place Chelmsford, orders: Analog MA Devices, 8 Inc., One Technology Way, P.O. Box 96, Norwood, MA 6-96 Phone: Fax: Phone: Order On-line at Application Support: Phone: Application or apps@hittite.com Support: Phone: -8-ANALOG-D

8 v.9 HMCLPE AMPLIFIER (SDLVA), GHz Evaluation PCB List of Materials for Evaluation PCB EVAL-HMCLPE [] Item J J J - J6 C C C5-C7 C8-C R-R R5 U PCB [] Description K-Type Connector SMA Connector DC Pins 7 pf Capacitor, Pkg. pf Capacitor, Pkg. nf Capacitor, Pkg..7 µf Capacitor, Tantalum. Ohm Resistor, Pkg. Ohm Resistor, Pkg. HMCLPE SDLVA 69 Evaluation PCB [] Reference this number when ordering complete evaluation PCB [] Circuit Board Material: Rogers 5 or Arlon 5 FR The circuit board used in the application should use RF circuit design techniques. Signal lines should have 5 ohm impedance while the package ground leads and exposed paddle should be connected directly to the ground plane similar to that shown. A sufficient number of via holes should be used to connect the top and bottom ground planes. N/C pins should also be connected to ground. The evaluation circuit board shown is available from Hittite upon request. For price, delivery and to place orders: Hittite Microwave Corporation, For price, delivery, Elizabeth and to Drive, place Chelmsford, orders: Analog MA Devices, 8 Inc., One Technology Way, P.O. Box 96, Norwood, MA 6-96 Phone: Fax: Phone: Order On-line at Application Support: Phone: Application or apps@hittite.com Support: Phone: -8-ANALOG-D 8