Features. OUT Intercept dbm Variation of OUT with Temperature from -40 C to dbm Input
|
|
- Francine Maxwell
- 5 years ago
- Views:
Transcription
1 v.1 DETECTOR / CONTROLLER, 5-7 MHz Typical Applications The HMC713MS8(E) is ideal for: Cellular Infrastructure WiMAX, WiBro & LTE/G Power Monitoring & Control Circuitry Receiver Signal Strength Indication (RSSI) Automatic Gain & Power Control Military, ECM & Radar Functional Diagram Features Wide Dynamic Range: up to 5 db High Accuracy: ±1 db with 5 db Range Up To.7 GHz Fast Output Response Time Supply Voltage: +.7 to +5.5V Power-Down Mode Excellent Stability over Temperature MSOP-8 SMT Package: 1.8 mm² General Description The HMC713MS8(E) Logarithmic Detector/Controller is ideal for converting RF signals with frequencies in the 5 MHz to 7 MHz range, to a proportional DC voltage at its output. The HMC713MS8(E) employs a successive compression technology which delivers 5 db of dynamic range with high conversion accuracy over a wide input frequency range. As the input signal is increased, successive amplifiers move into saturation one by one creating an accurate approximation of the logarithm function. The outputs of a series of detectors are summed, converted into voltage domain and buffered to drive the output. For detection mode, the pin is connected to the Vset input and will provide a nominal logarithmic slope of 17 mv/db and an intercept of -8 dbm. The HMC713MS8(E) can also be used in the controller mode where an external voltage is applied to the Vset pin to create an AGC or APC feedback loop. Electrical Specifications, T A = +5 C, Vcc= +3V [1] Parameter Typ. Typ. Typ. Typ. Typ. Typ. Units Input Frequency MHz ±3 db Dynamic Range db ±3 db Dynamic Range Center dbm ±1 db Dynamic Range db Slope mv/db Intercept dbm Variation of with Temperature from - C to dbm Input db [1] Detector mode measurements; (Pin ) is shorted to Vset (Pin 3) through an rc network. 1 For price, delivery and to place orders: Hittite Microwave Corporation, For price, delivery, Elizabeth and Drive, to place Chelmsford, orders: Analog MA Devices, 18Inc., responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other One Technology Way, P.O. Box 91, Norwood, MA -91 Phone: Fax: Order On-line at license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Phone: Order online at Trademarks and registered trademarks are Application the property of their Support: respective owners. Phone: Application or apps@hittite.com Support: Phone: 1-8-ANALOG-D
2 v.1 DETECTOR / CONTROLLER, 5-7 MHz Electrical Specifications, (continued) Parameter Conditions Min. Typ. Max. Units Power Down (EN) Interface Voltage Range for Normal Mode.8 x Vcc V Voltage Range for Powerdown Mode. x Vcc V Threshold Voltage Vcc/ V Power Supply (Vcc) Operating Voltage Range V Supply Current in Normal Mode 17 ma Supply Current in Power Down Mode.3 ma Interface Rise Time CLPF=, No Power to -1 dbm, 1% - 9% ns Fall Time CLPF=, -1 dbm to No Power, 9% - 1% 7 ns Output Video BW 3 db reduction in demodulated output voltage 1 MHz Voltage Range Closed Loop (Eval Board Setup) V Voltage Range Open Loop.1 to (Vcc -.1) V Current Drive Source / Sink 3.5 /.51 ma N Interface Current Drive Source / Sink 3. /.7 ma N Interface Output Voltage Range. -.1 V RF Input Input Return Loss (S11) F= 5 MHz to.5 GHz Z = 5Ω, See plot 1 db VSET Interface Input Impedance 1 MΩ Input Voltage Range Eval Board V Low Frequency Gain Vset to db Open Loop Corner Frequency 11 khz For price, delivery and to place orders: Hittite Microwave Corporation, For price, delivery, Elizabeth and Drive, to place Chelmsford, orders: Analog MA Devices, 18Inc., responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other One Technology Way, P.O. Box 91, Norwood, MA -91 Phone: Fax: Order On-line at license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Phone: Order online at Trademarks and registered trademarks are Application the property of their Support: respective owners. Phone: Application or apps@hittite.com Support: Phone: 1-8-ANALOG-D
3 v.1 DETECTOR / CONTROLLER, 5-7 MHz vs. Input Power, Fin = 5 MHz, N (V) vs. Input Power, Fin = 9 MHz, N (V) Err +5C Err +85C Err -C N Err +5C N Err +85C N Err -C N INPUT POWER (dbm) N Err +5C Err +85C Err -C N Err +5C N Err +85C N Err -C vs. Input Power, Fin = 1 MHz, N (V) vs. Input Power, Fin = 19 MHz, N (V) N INPUT POWER (dbm) N Err +5C Err +85C Err -C N Err +5C N Err +85C N Err -C Err +5C Err +85C Err -C N Err +5C N Err +85C N Err -C Input Power (dbm) INPUT POWER (dbm) vs. Input Power, Fin = MHz. vs. Input Power, Fin = 7 MHz., N (V) N Err +5C Err +85C Err -C N Err +5C N Err +85C N Err -C - -, N (V) Err +5C Err +85C Err -C N Err +5C N Err +85C N Err -C N INPUT POWER (dbm) NPUT POWER (dbm) Unless otherwise noted: Vcc= +3V, T A = +5 C 3 For price, delivery and to place orders: Hittite Microwave Corporation, For price, delivery, Elizabeth and Drive, to place Chelmsford, orders: Analog MA Devices, 18Inc., responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other One Technology Way, P.O. Box 91, Norwood, MA -91 Phone: Fax: Order On-line at license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Phone: Order online at Trademarks and registered trademarks are Application the property of their Support: respective owners. Phone: Application or apps@hittite.com Support: Phone: 1-8-ANALOG-D
4 v.1 DETECTOR / CONTROLLER, 5-7 MHz Slope vs. Frequency Slope vs. Supply Voltage SLOPE (mv/db) Intercept vs. Frequency INTERCEPT (dbm) FREQUENCY (GHz) C slope +85C slope -C slope +5C intercept +85C intercept -C intercept SLOPE (mv/db) Intercept vs. Supply Voltage INTERCEPT (dbm) VOLTAGE SUPPLY (V).5GHz.1GHz.9GHz 1.9GHz.GHz.7GHz.5GHz.1GHz.9GHz 1.9GHz.GHz.7GHz FREQUENCY (GHz) VOLTAGE SUPPLY (V) vs. Frequency & Input Power (V) dbm -1dBm -dbm -3dBm -dbm -5dBm -dbm FREQUENCY (GHz) Voltage & Error vs. Frequency (V) Error. -.5GHz.1GHz.3.9GHz 1.9GHz -.GHz.7GHz INPUT POWER (dbm) Unless otherwise noted: Vcc= +3V, T A = +5 C For price, delivery and to place orders: Hittite Microwave Corporation, For price, delivery, Elizabeth and Drive, to place Chelmsford, orders: Analog MA Devices, 18Inc., responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other One Technology Way, P.O. Box 91, Norwood, MA -91 Phone: Fax: Order On-line at license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Phone: Order online at Trademarks and registered trademarks are Application the property of their Support: respective owners. Phone: Application or apps@hittite.com Support: Phone: 1-8-ANALOG-D
5 v.1 Output Response Fall 9 MHz, C1 = Open 1.5 DETECTOR / CONTROLLER, 5-7 MHz Output Response Fall 9 MHz, C1 = 1nF 1.5 (V) TIME (ns) Output Response Rise 9 MHz, C1 = Open (V) dbm -1dBm -dbm -3dBm dbm -1dBm -dbm -3dBm (V) TIME (us) Output Response Rise 9 MHz, C1 = 1nF (V) dbm -1dBm -dbm -3dBm dbm -1dBm -dbm -3dBm TIME (ns) TIME (us) Input Return Loss -1 RETURN LOSS (db) FREQUENCY (GHz) Unless otherwise noted: Vcc= +3V, T A = +5 C 5 For price, delivery and to place orders: Hittite Microwave Corporation, For price, delivery, Elizabeth and Drive, to place Chelmsford, orders: Analog MA Devices, 18Inc., responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other One Technology Way, P.O. Box 91, Norwood, MA -91 Phone: Fax: Order On-line at license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Phone: Order online at Trademarks and registered trademarks are Application the property of their Support: respective owners. Phone: Application or apps@hittite.com Support: Phone: 1-8-ANALOG-D
6 v.1 DETECTOR / CONTROLLER, 5-7 MHz Absolute Maximum Ratings Vcc EN Vset Output Current N Output Current RF Input Power to +5.V to +5.V to +5.V 5 ma 5 ma 1 dbm Junction Temperature 15 C Continuous Pdiss (T = 85 C) (Derate 5.3 mw/ C above 85 C) Thermal Resistance (R th ) (junction to lead). Watts 18 C/W Storage Temperature -5 to +15 C Operating Temperature - to +85 C ESD Sensitivity (HBM) Outline Drawing Class 1C ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS Package Information Part Number Package Body Material Lead Finish MSL Rating Package Marking [3] [1] H713 HMC713MS8 Low Stress Injection Molded Plastic Sn/Pb Solder MSL1 XXXX [] H713 HMC713MS8E RoHS-compliant Low Stress Injection Molded Plastic 1% matte Sn MSL1 XXXX [1] Max peak reflow temperature of 35 C [] Max peak reflow temperature of C [3] -Digit lot number XXXX NOTES: 1. PACKAGE BODY MATERIAL: LOW STRESS INJECTION MOLDED PLASTIC SILICA AND SILICON IMPREGNATED.. LEAD MATERIAL: COPPER ALLOY 3. LEAD PLATING: 1% MATTE TIN. DIMENSIONS ARE IN INCHES [MILLIMETERS]. 5. DIMENSION DOES NOT INCLUDE MOLDFLASH OF.15mm PER SIDE.. DIMENSION DOES NOT INCLUDE MOLDFLASH OF.5mm PER SIDE. 7. ALL GroUND LEADS MUst BE SOLDERED TO PCB RF GroUND. For price, delivery and to place orders: Hittite Microwave Corporation, For price, delivery, Elizabeth and Drive, to place Chelmsford, orders: Analog MA Devices, 18Inc., responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other One Technology Way, P.O. Box 91, Norwood, MA -91 Phone: Fax: Order On-line at license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Phone: Order online at Trademarks and registered trademarks are Application the property of their Support: respective owners. Phone: Application or apps@hittite.com Support: Phone: 1-8-ANALOG-D
7 v.1 DETECTOR / CONTROLLER, 5-7 MHz Pin Descriptions Pin Number Function Description Interface Schematic 1 INP RF input pin. EN Enable pin. Apply VEN >.8 x Vcc for normal operation. Apply VEN <.xvcc to disable the HMC713MS8E and reduce supply current to.3ma. To ensure proper start-up apply the power-up sequence shown in the Power-Up Timing Diagram attached to the application circuit. 3 Vset Set point input for controller mode. Connect to with the resistor network shown in evaluation board drawing for detector mode. CLPF Connection for ground referenced external lowpass filter capacitor. 5 GND Device ground. 7 For price, delivery and to place orders: Hittite Microwave Corporation, For price, delivery, Elizabeth and Drive, to place Chelmsford, orders: Analog MA Devices, 18Inc., responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other One Technology Way, P.O. Box 91, Norwood, MA -91 Phone: Fax: Order On-line at license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Phone: Order online at Trademarks and registered trademarks are Application the property of their Support: respective owners. Phone: Application or apps@hittite.com Support: Phone: 1-8-ANALOG-D
8 v.1 DETECTOR / CONTROLLER, 5-7 MHz Pin Descriptions (Continued) Pin Number Function Description Interface Schematic 7 N Logarithmic output that converts the input power to a DC level in controller mode. Output voltage increases with increasing amplitude Inverted logarithmic output. N=.55 - x 8 Vcc Bias Supply. Connect supply voltage to all this pin with appropriate filtering. For price, delivery and to place orders: Hittite Microwave Corporation, For price, delivery, Elizabeth and Drive, to place Chelmsford, orders: Analog MA Devices, 18Inc., responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other One Technology Way, P.O. Box 91, Norwood, MA -91 Phone: Fax: Order On-line at license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Phone: Order online at Trademarks and registered trademarks are Application the property of their Support: respective owners. Phone: Application or apps@hittite.com Support: Phone: 1-8-ANALOG-D 8
9 v.1 DETECTOR / CONTROLLER, 5-7 MHz Application & Evaluation PCB Schematic Notes Note 1: The HMC713MS8(E) evaluation board is pre-assembled for single-ended input, and detector/rssi mode. Note : For detector mode, connect high impedance volt meter to the / N port. Note 3: For controller mode, remove R & C3 and install 1k Ω resistor (R) and 1pF capacitor (C), then make appropriate connection to and VSET. In controller mode, the / N output can be used to drive a variable gain amplifier, or a variable attenuator, either directly or through a buffer or microcontroller. Vset should be connected to an external supply, typically between +. and +1.V. Note : An external capacitance C1 can be connected to CLPF port for additional filtering of and N outputs.. Power-Up Timing Diagram 9 For price, delivery and to place orders: Hittite Microwave Corporation, For price, delivery, Elizabeth and Drive, to place Chelmsford, orders: Analog MA Devices, 18Inc., responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other One Technology Way, P.O. Box 91, Norwood, MA -91 Phone: Fax: Order On-line at license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Phone: Order online at Trademarks and registered trademarks are Application the property of their Support: respective owners. Phone: Application or apps@hittite.com Support: Phone: 1-8-ANALOG-D
10 v.1 DETECTOR / CONTROLLER, 5-7 MHz Evaluation PCB List of Materials for Evaluation PCB 1197 [1] Item J1 - J3 J5 - J7 C3 C Description PC Mount SMA Connector DC Pin 1 pf Capacitor, Pkg..1 µf Capacitor, Pkg. R1, R7, R1 Ω Resistor, Pkg. R 51Ω Resistor, Pkg. R3, R5 1k Resistor, Pkg. R U1 PCB [] 1k Resistor, Pkg. HMC713MS8(E) Logarithmic Detector / Controller 119 Evaluation PCB [1] Reference this number when ordering complete evaluation PCB [] Circuit Board Material: Arlon 5FR or Rogers 35 The circuit board used in the application should use RF circuit design techniques. Signal lines should have 5 ohm impedance while the package ground leads and exposed paddle should be connected directly to the ground plane similar to that shown. A sufficient number of via holes should be used to connect the top and bottom ground planes. The evaluation circuit board shown is available from Hittite upon request. For price, delivery and to place orders: Hittite Microwave Corporation, For price, delivery, Elizabeth and Drive, to place Chelmsford, orders: Analog MA Devices, 18Inc., responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other One Technology Way, P.O. Box 91, Norwood, MA -91 Phone: Fax: Order On-line at license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Phone: Order online at Trademarks and registered trademarks are Application the property of their Support: respective owners. Phone: Application or apps@hittite.com Support: Phone: 1-8-ANALOG-D 1
Features db
v1.19 DETECTOR / CONTROLLER, 5-8 MHz Power Detectors - SMT Typical Applications The is ideal for: Cellular Infrastructure WiMAX, WiBro & LTE/G Power Monitoring & Control Circuitry Receiver Signal Strength
More informationHMC600LP4 / 600LP4E POWER DETECTORS - SMT. 75 db LOGARITHMIC DETECTOR / CONTROLLER MHz. Features. Typical Applications. General Description
v.99 HMC6LP4 / 6LP4E 7 db LOGARITHMIC DETECTOR / CONTROLLER - 4 MHz Typical Applications The HMC6LP4 / HMC6LP4E is ideal for IF and RF applications in: Cellular/PCS/G WiMAX, WiBro & Fixed Wireless Power
More informationHMC601LP4 / 601LP4E POWER DETECTORS - SMT. 75 db, FAST SETTLING, LOGARITHMIC DETECTOR / CONTROLLER MHz. Typical Applications.
v.9 HMC6LP4 / 6LP4E 7 db, FAST SETTLING, LOGARITHMIC DETECTOR / CONTROLLER - 4 MHz Typical Applications The HMC6LP4(E) is ideal for IF and RF applications in: Cellular/PCS/G WiMAX, WiBro & Fixed Wireless
More informationHMC662LP3E POWER DETECTORS - SMT. 54 db, LOGARITHMIC DETECTOR, 8-30 GHz. Typical Applications. Features. Functional Diagram. General Description
Typical Applications The is ideal for: Point-to-Point Microwave Radio VSAT Wideband Power Monitoring Receiver Signal Strength Indication (RSSI) Test & Measurement Functional Diagram Features Wide Input
More informationHMC602LP4 / 602LP4E POWER DETECTORS - SMT. 70 db, LOGARITHMIC DETECTOR / CONTROLLER, MHz
v3.9 HMC6LP / 6LPE 7 db, LOGARITHMIC DETECTOR / CONTROLLER, 1-8 MHz 1 Typical Applications The HMC6LP(E) is ideal for IF and RF applications in: Cellular/PCS/3G WiMAX, WiBro, WLAN, Fixed Wireless & Radar
More informationHMC602LP4 / 602LP4E POWER DETECTORS - SMT. 70 db, LOGARITHMIC DETECTOR / CONTROLLER, MHz
v3.9 HMC6LP / 6LPE 7 db, LOGARITHMIC DETECTOR / CONTROLLER, 1-8 MHz 1 Typical Applications The HMC6LP(E) is ideal for IF and RF applications in: Cellular/PCS/3G WiMAX, WiBro, WLAN, Fixed Wireless & Radar
More informationHMC948LP3E POWER DETECTORS - SMT. 54 db, LOGARITHMIC DETECTOR, 1-23 GHz. Typical Applications. Features. Functional Diagram. General Description
v.9 HMC948LPE DETECTOR, - GHz Typical Applications The HMC948LPE is ideal for: Point-to-Point Microwave Radio VSAT Wideband Power Monitoring Receiver Signal Strength Indication (RSSI) Test & Measurement
More informationHMC612LP4 / 612LP4E v
HMC6LP4 / 6LP4E v.8 DETECTOR / CONTROLLER, 5 Hz - MHz Typical Applications Features The HMC6LP4(E) is ideal for IF and RF applications in: Cellular/PCS/G WiMAX, WiBro, WLAN, Fixed Wireless & Radar Power
More informationHMC662LP3E POWER DETECTORS - SMT. 54 db, LOGARITHMIC DETECTOR, 8-30 GHz. Typical Applications. Features. Functional Diagram. General Description
v5.94 HMC66LPE DETECTOR, 8 - GHz Typical Applications The HMC66LPE is ideal for: Point-to-Point Microwave Radio VSAT Wideband Power Monitoring Receiver Signal Strength Indication (RSSI) Test & Measurement
More informationFeatures. = +25 C, 50 Ohm system
v6.312 Typical Applications Features The E is ideal for: Point-to-Point Radio VSAT Radio Test Instrumentation Microwave Sensors Military, ECM & Radar Functional Diagram Wide Bandwidth: 5-26.5 GHz Excellent
More informationHMC1013LP4E. SDLVAs - SMT. SUCCESSIVE DETECTION LOG VIDEO AMPLIFIER (SDLVA), GHz
v.9 HMCLPE AMPLIFIER (SDLVA),.5-8.5 GHz Typical Applications The HMCLPE is ideal for: EW, ELINT & IFM Receivers DF Radar Systems ECM Systems Broadband Test & Measurement Power Measurement & Control Circuits
More informationHMC695LP4 / HMC695LP4E
v.1 Typical Applications The HMC95LP(E) is ideal for: Fiber Optic Applications Point-to-Point Radios Military Radar Functional Diagram Features Output Power: +7 dbm Sub-Harmonic Suppression: >5 dbc SSB
More informationOBSOLETE. = +25 C, Vdd = Vs= +5V, Vctl= 0/ +5V. Parameter Frequency Min. Typ. Max. Units DC GHz 37. db Gain (Maximum Gain State)
v.1212.5 db LSB GaAs MMIC 6-BIT DIGITAL Typical Applications The is ideal for: IF & RF Applications Cellular/3G Infrastructure WiBro / WiMAX / 4G Microwave Radio & VSAT Test Equipment and Sensors Functional
More informationHMC478SC70 / 478SC70E v
HMC47SC7 / 47SC7E v2.14 Typical Applications The HMC47SC7(E) is an ideal for: Cellular / PCS / 3G WiBro / WiMAX / 4G Fixed Wireless & WLAN CATV, Cable Modem & DBS Microwave Radio & Test Equipment Functional
More informationFeatures
HMC37SC7E v1.1.3-3. GHz Typical Applications The HMC37SC7E is ideal for: Cellular/PCS/3G WCS, mmds & ism Fixed Wireless & WLAN Private Land Mobile Radio Functional Diagram Features Single Supply: Vdd =
More informationAnalog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED
Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED www.analog.com www.hittite.com THIS PAGE INTENTIONALLY LEFT BLANK HMC476SC7 / 476SC7E v4.814 Typical
More informationHMC326MS8G / 326MS8GE
v9.511 AMPLIFIER, 3. - 4.5 GHz Typical Applications The HMC326MS8G / HMC326MS8GE is ideal for: Microwave Radios Broadband Radio Systems Wireless Local Loop Driver Amplifier Functional Diagram Features
More informationHMC913LC4B. SDLVAs - SMT. SUCCESSIVE DETECTION LOG VIDEO AMPLIFIER (SDLVA), GHz
v5.64 HMC93LC4B AMPLIFIER (SDLVA),.6 - GHz Typical Applications The HMC93LC4B is ideal for: EW, ELINT & IFM Receivers DF Radar Systems ECM Systems Broadband Test & Measurement Power Measurement & Control
More informationFeatures OBSOLETE. = +25 C, 50 Ohm system, Vdd = +5V. Parameter Frequency Min. Typ. Max. Units GHz
Typical Applications v.91 ATTENUATOR,.5-6. GHz Features The is ideal for: Point-to-Point Radio Cellular/3G & WiMAX/4G Infrastructure Test Instrumentation Microwave Sensors Military, ECM & Radar Functional
More informationFeatures. = +25 C, Vcc = +5V, Z o = 50Ω, Bias1 = GND
v1.612 Typical Applications The is ideal for: LO Generation with Low Noise Floor Clock Generators Mixer LO Drive Military Applications Test Equipment Sensors Functional Diagram Features Low Noise Floor:
More informationHMC1040LP3CE. Amplifiers - Low Noise - smt. GaAs phemt MMIC LOW NOISE AMPLIFIER, GHz. Features. Typical Applications. General Description
v.112 HMC14LP3CE AMPLIFIER, 24-43. GHz Typical Applications This HMC14LP3BE is ideal for: Point-to-Point Radios Test Instrumentation SatCom Transponders & VSAT Industrial Sensors EW & ECM Subsystems Functional
More informationOBSOLETE HMC915LP4E. GaAs MMIC MIXER w/ INTEGRATED LO AMPLIFIER, GHz. Typical Applications. Features. Functional Diagram. General Description
v1.5 LO AMPLIFIER,.5-2.7 GHz Typical Applications The is ideal for: PCS / 3G Infrastructure Base Stations & Repeaters WiMAX & WiBro ISM & Fixed Wireless Functional Diagram Features Input IP3: +28 dbm Low
More informationFeatures OBSOLETE. Parameter Min. Typ. Max. Units. Frequency Range GHz Insertion Loss 5 7 db. Input Return Loss 16 db
v1.611 Typical Applications The is ideal for: EW Receivers Weather & Military Radar Satellite Communications Beamforming Modules Phase Cancellation Functional Diagram Features Low RMS Phase Error: 1.2
More informationHMC639ST89 / 639ST89E
v3.1 HMC63ST / 63STE AMPLIFIER,.2-4. GHz Typical Applications The HMC63ST(E) is ideal for: Cellular / PCS / 3G WiMAX, WiBro, & Fixed Wireless CATV & Cable Modem Microwave Radio IF and RF Sections Features
More informationFeatures OBSOLETE. = +25 C, 50 Ohm System, Vcc= 3V
Typical Applications Prescaler for DC to 4. GHz PLL Applications: DBS/CATV Tuners 82.11x & HiperLAN WLAN Fixed Wireless & WLL Microwave & VSAT Radios Cellular & 3G Functional Diagram v.93 HMC42MS8 / 42MS8E
More informationAnalog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED
Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED www.analog.com www.hittite.com THIS PAGE INTENTIONALLY LEFT BLANK v3.1211 45 Analog Phase Shifter,
More informationHMC437MS8G / 437MS8GE
v5.1211 HMC37MS8G / 37MS8GE Typical Applications Prescaler for DC to C Band PLL Applications: UNII, Point-to-Point & VSAT Radios 82.11a & HiperLAN WLAN Fiber Optic Cellular / 3G Infrastructure Functional
More information= +25 C, Vdd = Vs= P/S= +5V
v.3.5 db LSB GaAs MMIC 6-BIT DIGITAL VARIABLE GAIN Typical Applications The HMC68ALP5E is ideal for: IF & RF Applications Cellular/3G Infrastructure WiBro / WiMAX / 4G Microwave Radio & VSAT Test Equipment
More informationFeatures. = +25 C, 50 Ohm System, Vcc= +3V
v.1 HMC32 / 32E Typical Applications Prescaler for DC to C Band PLL Applications: UNII, Point-to-Point & VSAT Radios 82.11a & HiperLAN WLAN Fiber Optic Cellular / 3G Infrastructure Functional Diagram Features
More informationFeatures. = +25 C, Vcc1 = Vcc2 = 5V, Zo = 75 Ohm [1]
HMC754SGE v.49 Typical Applications The HMC754SGE is ideal for: CATV / Broadband Infrastructure Test & Measurement Equipment Line Amps and Fiber Nodes Customer Premise Equipment Functional Diagram Output
More informationGain Control Range db
v1.112-12 GHz Typical Applications The is ideal for: Point-to-Point Radio Point-to-Multi-Point Radio EW & ECM Subsystems X-Band Radar Test Equipment & Sensors Functional Diagram Features Wide Gain Control
More informationFeatures. Parameter Frequency Min. Typ. Max. Units Insertion Loss DC GHz db
v.1212 HMC55A / 55AE Typical Applications The HMC55A / HMC55AE is ideal for: RFID & Electronic Toll Collection (ETC) Tags, Handsets & Portables ISM, WLAN, WiMAX & WiBro Automotive Telematics Test Equipment
More informationFeatures OBSOLETE. = +25 C, Vcc= 5V [1]
v.41 Typical Applications The is Ideal for: Microwave Radio & VSAT Military Radios, Radar & ECM Test Instrumentation Functional Diagram Electrical Specifications, T A = + C, Vcc= V [1] Features Output
More informationFeatures. Parameter Frequency (GHz) Min. Typ. Max. Units GHz GHz GHz. Attenuation Range GHz 15.
v.91.5 db LSB GaAs MMIC 5-BIT DIGITAL ATTENUATOR,.1-33 GHz Typical Applications The HMC941LP4 / HMC941LP4E is ideal for: Fiber Optics & Broadband Telecom Microwave Radio & VSAT Military Radios, Radar &
More informationHMC694LP4 / 694LP4E. Variable gain amplifiers - ANALOG - smt. GaAs MMIC ANALOG VARIABLE GAIN AMPLIFIER, 6-17 GHz. Typical Applications
v2.1 Typical Applications The HMC694LP4(E) is ideal for: Point-to-Point Radio Point-to-Multi-Point Radio EW & ECM X-Band Radar Test Equipment Features Wide Gain Control Range: 23 db Single Control Voltage
More informationHMC659LC5 LINEAR & POWER AMPLIFIERS - SMT. GaAs PHEMT MMIC POWER AMPLIFIER, DC - 15 GHz. Features. Typical Applications. General Description
v.61 Typical Applications The wideband PA is ideal for: Telecom Infrastructure Microwave Radio & VSAT Military & Space Test Instrumentation Fiber Optics Functional Diagram Features P1dB Output Power: +27.5
More informationFeatures OBSOLETE. = +25 C, Vcc1 = Vcc2 = +5V
v3.121.1-15 GHz LOW NOISE PROGRAMMABLE DIVIDER (N = 1, 2,, 8) Typical Applications The is ideal for: Satellite Communication Systems Point-to-Point & Point-to-Multi-Point Radios Military Applications Test
More informationAnalog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED
Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED www.analog.com www.hittite.com THIS PAGE INTENTIONALLY LEFT BLANK v.41 Typical Applications The HMC649ALP6E
More informationHMC471MS8G / 471MS8GE. Features OBSOLETE. DC GHz GHz GHz GHz GHz
v1.65 Typical Applications The HMC471MSG / HMC471MSGE is a dual RF/IF gain block & LO or PA driver: Cellular / PCS / 3G Fixed Wireless & WLAN CATV, Cable Modem & DBS Microwave Radio & Test Equipment Functional
More information= +25 C, Vcc = +3.3V, Z o = 50Ω (Continued)
v1.1 HMC9LP3E Typical Applications The HMC9LP3E is ideal for: LO Generation with Low Noise Floor Software Defined Radios Clock Generators Fast Switching Synthesizers Military Applications Test Equipment
More informationParameter Min. Typ. Max. Units Frequency Range GHz
v.312 27-31. GHz Typical Applications The is ideal for: Point-to-Point Radio Point-to-Multi-Point Radio EW & ECM Subsystems Ka-Band Radar & VSAT Test Equipment Functional Diagram Features Wide Gain Control
More informationFeatures. DC GHz GHz GHz DC GHz GHz GHz GHz DC - 4 GHz GHz Supply Current (Icq) ma
HMC311ST9 / 311ST9E v.17 MMIC AMPLIFIER, DC - GHz Typical Applications The HMC311ST9(E) is ideal for: Cellular / PCS / 3G Fixed Wireless & WLAN CATV & Cable Modem Microwave Radio Functional Diagram Features
More informationFeatures. Output Power for 1 db Compression (P1dB) dbm Saturated Output Power (Psat) dbm
v1.314 Typical Applications Features The is ideal for: Test Instrumentation Microwave Radio & VSAT Telecom Infrastructure Military & Space Fiber optics Functional Diagram P1dB Output Power: +27 dbm Psat
More informationHMC618ALP3E AMPLIFIERS - LOW NOISE - SMT. GaAs SMT phemt LOW NOISE AMPLIFIER, GHz. Typical Applications. Features. Functional Diagram
7 Typical Applications The is ideal for: Cellular/3G and LTE/WiMAX/4G BTS & Infrastructure Repeaters and Femto Cells Public Safety Radios Functional Diagram v. Electrical Specifications T A = + C, Rbias
More informationFeatures OBSOLETE. = +25 C, Vdd = +3.3 Vdc, 50 Ohm System
Typical Applications v1.1 ATTENUATOR,.4-2.2 GHz Features The HMC473MS8 / HMC473MS8E is ideal for: Cellular, UMTS/3G Infrastructure Portable Wireless GPS Functional Diagram RoHS Compliant Product Single
More informationHMC589ST89 / 589ST89E. Features OBSOLETE. DC GHz GHz GHz. db Gain 22
v.71 HMC59ST9 / 59ST9E Typical Applications The HMC59ST9 / HMC59ST9E is ideal for: Cellular / PCS / 3G Fixed Wireless & WLAN CATV, Cable Modem & DBS Microwave Radio & Test Equipment IF & RF Applications
More informationFeatures OBSOLETE. DC GHz GHz GHz GHz GHz
v2.71 HMC75ST9 / 75ST9E Typical Applications The HMC75ST9 / HMC75ST9E is an ideal RF/IF gain block & LO or PA driver: Cellular / PCS / 3G Fixed Wireless & WLAN CATV, Cable Modem & DBS Microwave Radio &
More informationHMC480ST89 / 480ST89E
v2.7 HMCST9 / ST9E Typical Applications The HMCST9 / HMCST9E is an ideal RF/IF gain block & LO or PA driver for: Cellular / PCS / 3G Fixed Wireless & WLAN CATV, Cable Modem & DBS Microwave Radio & Test
More informationParameter Min. Typ. Max. Units
v4.112 Typical Applications The is ideal for: Point-to-Point and Point-to-Multi-Point Radio Military Radar, EW & ELINT Satellite Communications Functional Diagram Features General Description The is a
More informationHMC997LC4. Variable Gain Amplifier - SMT. VARIABLE GAIN AMPLIFIER GHz. Typical Applications. General Description. Functional Diagram
v2.14 Typical Applications The is ideal for: Point-to-Point Radio Point-to-Multi-Point Radio EW & ECM Subsystems Ka-Band Radar Test Equipment Functional Diagram Features Wide Gain Control Range: 1 db Single
More informationFeatures. Parameter Frequency Min. Typ. Max. Units Insertion Loss DC GHz db. DC GHz
v1.11 HMC55 / 55E Typical Applications The HMC55 / HMC55E is ideal for: RFID & Electronic Toll Collection (etc) Tags, Handsets & Portables ISM, WLAN, WiMAX & WiBro Automotive Telematics Test Equipment
More informationHMC705LP4 / HMC705LP4E
HMC75LP4 / HMC75LP4E v4.212 Typical Applications Features The HMC75LP4(E) is ideal for: Satellite Communication Systems Point-to-Point Radios Military Applications Sonet Clock Generation Test Equipment
More informationAnalog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED
Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED www.analog.com www.hittite.com THIS PAGE INTENTIONALLY LEFT BLANK v.613 Typical Applications The HMC545A
More informationFeatures. = +25 C, Vdd1 = Vdd2 = +3.5V, Idd = 80 ma [2]
Typical Applications This is ideal for: Features Low Noise Figure: 1.8 db Point-to-Point Radios Point-to-Multi-Point Radios Military & Space Test Instrumentation Functional Diagram High Gain: 19 db High
More informationFeatures. = +25 C, Vdd= +3V. Parameter Min. Typ. Max. Units Frequency Range GHz Gain db
7 Typical Applications The HMC286 / HMC286E is ideal for: BlueTooth Home RF 82.11 WLAN Radios PCMCIA Platforms Functional Diagram v3.41 Features 2.4 GHz LNA Noise Figure: 1.7 db Gain: 19 db Single Supply:
More informationHMC320MS8G / 320MS8GE. Features OBSOLETE. = +25 C, Vdd = +3V
Typical Applications The HMCMSG(E) is ideal for: UNII HiperLAN Functional Diagram v. Electrical Specifications, T A = + C, Vdd = +V HMCMSG / MSGE Features General Description Selectable Functionality:
More informationFeatures. = +25 C, VDD = +5 V, 0 dbm Drive Level [1]
Typical Applications Features The HMC196LP3E is suitable for: Point-to-Point & VSAT Radios Test Instrumentation Military & Space Functional Diagram High Output Power: 12 dbm Low Input Power Drive: -2 to
More informationSURFACE MOUNT PHEMT 2 WATT POWER AMPLIFIER,
v2.617 AMPLIFIER, - 12 GHz Typical Applications The is ideal for use as a power amplifier for: Point-to-Point Radios Point-to-Multi-Point Radios Test Equipment and Sensors Military End-Use Features Saturated
More informationFeatures. = +25 C, Vcc =5V, Vpd = 5V. Parameter Min. Typ. Max. Min. Typ. Max. Min. Typ. Max Units
v2.917 Typical Applications Features The is ideal for: Point-to-Point Radios Point-to-Multipoint Radios VSAT LO Driver for HMC Mixers Military EW & ECM Functional Diagram High Output IP3: +28 dbm Single
More informationAnalog Devices Welcomes Hittite Microwave Corporation
Analog Devices Welcomes Hittite Microwave Corporation www.analog.com www.hittite.com THIS PAGE INTENTIONALLY LEFT BLANK v.915 GaAs MMIC 6-BIT DIGITAL Typical Applications The HMC648ALP6E is ideal for:
More information= +25 C, With Vee = -5V & VCTL= 0/-5V
v.3.5db LSB GaAs MMIC 6-BIT DIGITAL Typical Applications Features The is ideal for: Basestation Infrastructure Fiber Optics & Broadband Telecom Microwave & VSAT Radios Military & Space Test Instrumentation
More informationFeatures. = +25 C, Vdd1 = Vdd2 = +3.5V, Idd = 70 ma
v2.61 Typical Applications This is ideal for: Point-to-Point Radios Point-to-Multi-Point Radios Military & Space Test Instrumentation Functional Diagram Features Low Noise Figure: 2.5 db Gain: 13 db P1dB
More informationFeatures. = +25 C, Vdd1 = Vdd2 = +3.5V, Idd = 45 ma
v2.61 Typical Applications This is ideal for: Point-to-Point Radios Point-to-Multi-Point Radios Military & Space Test Instrumentation Functional Diagram Features Low Noise Figure: 2. db High Gain: 22 db
More informationFeatures. Output Power: 2 dbm Typical Spurious Suppression: >20 dbc SSB Phase Noise: khz Offset Test Instrumentation
Typical Applications The is Ideal for: Microwave Radio & VSAT Military Radios, Radar & ECM Features Output Power: dbm Typical Spurious Suppression: > dbc SSB Phase Noise: -148 dbc/hz @ 1 khz Offset Test
More informationAnalog Devices Welcomes Hittite Microwave Corporation
Analog Devices Welcomes Hittite Microwave Corporation www.analog.com www.hittite.com THIS PAGE INTENTIONALLY LEFT BLANK v5.121 HMC32 / 32E Typical Applications Prescaler for DC to C band PLL applications:
More informationFeatures. = +25 C, Vcc= 5V
v4.21 Typical Applications Active Multiplier for X Band Applications: Fiber Optic Point-to-Point Radios Military Radar Functional Diagram Features Output Power: +4 dbm Sub-Harmonic Suppression: >2 dbc
More informationFeatures. = +25 C, Vcc = 5V, Vpd = 5V. Parameter Min. Typ. Max. Min. Typ. Max. Units
v2.717 MMIC AMPLIFIER, 4 - GHz Typical Applications The is ideal for: Cellular / PCS / 3G Fixed Wireless & WLAN CATV, Cable Modem & DBS Microwave Radio & Test Equipment IF & RF Applications Functional
More informationFeatures. = +25 C, Vdd = +5 Vdc, 50 Ohm System
v4.19 Typical Applications The HMC174MS8(E) is ideal for: Infrastructure & Repeaters Cellular/3G & WiMAX Portable Wireless LNA Protection Automotive Telematics Test Equipment Features Low Insertion Loss:.5
More informationHMC540SLP3E v db LSB SILICON MMIC 4-BIT DIGITAL POSITIVE CONTROL ATTENUATOR, GHz
HMC54SLP3E v.95 LSB SILICON MMIC 4-BIT DIGITAL POSITIVE CONTROL ATTENUATOR,. - 8 GHz Typical Applications Features The HMC54SLP3E is ideal for both RF and IF applications: Cellular Infrastructure Wireless
More informationAnalog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED
Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED www.analog.com www.hittite.com THIS PAGE INTENTIONALLY LEFT BLANK Typical Applications Prescaler for
More informationFeatures = +5V. = +25 C, Vdd 1. = Vdd 2
v1.11 HMC51LP3 / 51LP3E POWER AMPLIFIER, 5-1 GHz Typical Applications The HMC51LP3(E) is ideal for: Microwave Radio & VSAT Military & Space Test Equipment & Sensors Fiber Optics LO Driver for HMC Mixers
More informationFeatures. = +25 C, 50 Ohm system
HMC12ALC4 Typical Applications v7.617 ATTENUATOR, 5-3 GHz Features The HMC12ALC4 is ideal for: Point-to-Point Radio VSAT Radio Test Instrumentation Microwave Sensors Military, ECM & Radar Functional Diagram
More informationHMC580ST89 / 580ST89E. Features OBSOLETE. DC GHz GHz GHz. db db db Gain Variation Over Temperature DC GHz 0.
v.71 HMC5ST9 / 5ST9E Typical Applications The HMC5ST9 / HMC5ST9E is ideal forr: Cellular / PCS / 3G Fixed Wireless & WLAN CATV, Cable Modem & DBS Microwave Radio & Test Equipment IF & RF Applications Functional
More informationHMC412BMS8GE MIXER - SINGLE & DOUBLE BALANCED - SMT. Typical Applications. Features. Functional Diagram. General Description
HMCBMSGE v1.1 Typical Applications The HMCBMSGE is ideal for: Long Haul Radio Platforms Microwave Radio VSAT Functional Diagram Features Conversion Loss: db Noise Figure: db LO to RF Isolation: db LO to
More informationFeatures. Parameter Frequency (GHz) Min. Typ. Max. Units GHz GHz GHz. Attenuation Range GHz 15.
v.6.5 LSB GaAs MMIC 5-BIT DIGITAL ATTENUATOR,. - 33 GHz Typical Applications Features The is ideal for: Fiber Optics & Broadband Telecom Microwave Radio & VSAT Military Radios, Radar & ECM Space Applications
More informationFeatures OBSOLETE. Saturated Output Power (Psat) dbm Output Third Order Intercept (IP3) dbm Supply Current (Idd) ma
7 Typical Applications The HMC667LP2(E) is ideal for: WiMAX, WiBro & Fixed Wireless SDARS & WLAN Receivers Infrastructure & Repeaters Access Points Telematics & DMB Functional Diagram v2.11 Electrical
More informationFeatures OBSOLETE. = +25 C, Rbias = 0 Ohm. Bypass Mode Failsafe Mode Parameter
7 Typical Applications The HMC668LP3(E) is ideal for: Cellular/3G and LTE/WiMAX/4G BTS & Infrastructure Repeaters and Femtocells Tower Mounted Amplifiers Test & Measurement Equipment Functional Diagram
More informationParameter Frequency (GHz) Min. Typ. Max. Units DC GHz GHz GHz Attenuation Range DC GHz 31.5 db
Typical Applications The is ideal for: 3G Infrastructure & access points Cellular/3G, LTE & UMB WiMAX, WiBN & Fixed Wireless Test Equipment and Sensors GSM, WCDMA & TD-SCDMA Functional Diagram Features.5
More information= +25 C, 50 Ohm System, Vdd = +5V
v3.69 HMC68LP4 / 68LP4E VARIABLE GAIN AMPLIFIER, 3-4 MHz Variable gain amplifiers - digital - SMT Typical Applications The HMC68lp4(E) is ideal for: Cellular/3G Infrastructure WiBro / WimaX / 4G Microwave
More informationHMC849ALP4CE SWITCHES - SPDT - SMT. HIGH ISOLATION SPDT NON-REFLECTIVE SWITCH, DC - 6 GHz. Typical Applications. Features. Functional Diagram
Typical Applications The is ideal for: Cellular/4G Infrastructure WiMAX, WiBro & Fixed Wireless Automotive Telematics Mobile Radio Test Equipment Functional Diagram Features High Isolation: up to Single
More informationFeatures. = +25 C, Vctl = 0/+5 Vdc, 50 Ohm System RF1 / RF2 RF1 / RF2. trise, tfall (10/90% RF) ton, toff (50% CTL to 10/90% RF)
HMC194MS8 / 194MS8E Typical Applications The HMC194MS8 /HMC194MS8E is ideal for: Cellular/PCS Base Stations Portable Wireless MMDS & WirelessLAN Features Ultra Small Package: MSOP8 High Isolation: 5 Positive
More informationHMC346MS8G / 346MS8GE
Typical Applications v7.18 Features This attenuator is ideal for use as a VVA for DC - 8 GHz applications: Point-to-Point Radio VSAT Radio Functional Diagram Wide Bandwidth: DC - 8 GHz Low Phase Shift
More informationAnalog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED
Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED www.analog.com www.hittite.com THIS PAGE INTENTIONALLY LEFT BLANK v.51 HMC7LP5E POWER AMPLIFIER,.2
More informationFeatures. = +25 C, Vs = +5V, Vpd = +5V, Vbias=+5V
v4.1217 HMC49LP4E Typical Applications This amplifier is ideal for use as a power amplifier for 3.3-3.8 GHz applications: WiMAX 82.16 Fixed Wireless Access Wireless Local Loop Functional Diagram Features
More informationFeatures. = +25 C, Vdd = +5V, Idd = 400mA [1]
v.61 Typical Applications The is ideal for: Point-to-Point Radios Point-to-Multi-Point Radios VSAT Military & Space Features Saturated Output Power:.5 dbm @ 21% PAE High Output IP3: 34.5 dbm High Gain:.5
More informationHMC599ST89 / 599ST89E. Features. The HMC599ST89(E) is ideal for: = +25 C MHz. Gain Variation Over Temperature MHz 0.
HMCST / STE Typical Applications v2.3 GaAs phemt MMIC LNA, Ohm - 1 MHz Features The HMCST(E) is ideal for: High P1 Output Power: +1 m VHF / UHF Antennas HDTV Receivers CMTS Equipment CATV, Cable Modem
More informationOBSOLETE. = +25 C, With Vdd = +5V & Vctl = 0/+5V. Parameter Frequency Min. Typ. Max. Units DC - 4 GHz GHz Attenuation Range DC - 10 GHz 10 db
Typical Applications The HMC8LP3E is ideal for: Test Equipment and Sensors ISM, MMDS, WLAN, WiMAX, WiBro Microwave Radio & VSAT Cellular Infrastructure Functional Diagram HMC8LP3E v.11 1 GaAs MMIC 1-BIT
More informationAnalog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED
Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED www.analog.com www.hittite.com THIS PAGE INTENTIONALLY LEFT BLANK v2.49 Typical Applications The HMC536LP2(E)
More informationFeatures OBSOLETE. = +25 C, 50 Ohm System GHz degrees Insertion Loss 6-15 GHz 8 11 db. Return Loss (Input and Output) 6-15 GHz 7 db
v2.29 6 ANALOG PHASE SHIFTER, 1 Typical Applications The HMC538LP4 / HMC538LP4E is ideal for: Fiber Optics Military Test Equipment Functional Diagram Features Electrical Specifications, T A = +25 C, 5
More informationFeatures. = +25 C, 50 Ohm System, Vcc= +5V
v5.1211 Typical Applications Prescaler for DC to 18 GHz PLL Applications: Point-to-Point / Multi-Point Radios VSAT Radios Fiber Optic Test Equipment Military Functional Diagram Features Ultra Low ssb Phase
More informationFeatures. = +25 C, Vcc = +5.0V. Vcc = +5V Parameter
Typical Applications Ideal as a Driver & Amplifier for: 2.2-2.7 GHz MMDS 3. GHz Wireless Local Loop - 6 GHz UNII & HiperLAN Functional Diagram Features P1dB Output Power: +14 dbm Output IP3: +27 dbm Gain:
More informationv Features = +25 C, 50 Ohm System, Vcc = 5V
Typical Applications Prescaler for DC to X band PLL applications: Satellite communication systems Fiber optic Point-to-point and point-to-multi-point radios VSAT Functional Diagram Features Ultra low SSB
More informationFeatures. = +25 C, IF = 100 MHz, LO = +13 dbm, LSB [1]
v1.6 3.5 - GHz Typical Applications The HMC21BMSGE is ideal for: Base stations, Repeaters & Access Points WiMAX, WiBro & Fixed Wireless Portables & Subscribers PLMR, Public Safety & Telematics Functional
More information= +25 C, Vdd = Vs= P/S= +5V
v3. HMC68LP5 / 68LP5E.5 db LSB GaAs MMIC 6-BIT DIGITAL VARIABLE GAIN AMPLIFIER w/ SERIAL CONTROL, DC - GHz Variable gain amplifiers - digital - SMT Typical Applications The HMC68LP5(E) is ideal for: IF
More informationHMC639ST89 / 639ST89E
Typical Applications The HMC39ST9(E) is ideal for: Cellular / PCS / 3G WiMAX, WiBro, & Fixed Wireless CATV & Cable Modem Microwave Radio IF and RF Sections Functional Diagram Electrical Specifications,
More informationFeatures. = +25 C, Vcc1, Vcc2 = +5V. Parameter Min. Typ. Max. Units Fo Fo/2 RFOUT RFOUT/2 RFOUT/4
v4.11 Typical Applications Low noise MMIC VCO w/half Frequency, Divide-by-4 Outputs for: VSAT Radio Point to Point/Multipoint Radio Test Equipment & Industrial Controls Military End-Use Functional Diagram
More informationFeatures OBSOLETE. Isolation DC GHz db
Typical Applications Features - 224 The is ideal for: Cellular / 4G Infrastructure WiMAX, WiBro & Fixed Wireless Automotive Telematics Mobile Radio Test Equipment Functional Diagram Input P1dB: + @ Vdd
More informationFeatures. = +25 C, 50 Ohm system. DC - 10GHz DC - 14 Ghz DC - 10 GHz DC - 14 GHz Return Loss DC - 14 GHz 5 10 db
Typical Applications v2.717 Features The is ideal for: Basestation Infrastructure Fiber Optics & Broadband Telecom Microwave Radio & VSAT Military Radios, Radar, & ECM Test Instrumentation Functional Diagram
More informationFeatures. = +25 C, Vcc(RF), Vcc(DIG) = +5V
& DIVIDE-BY-16, 23. - 26. GHz Typical Applications The HMC739LP4(E) is ideal for: Point-to-Point Radios Point-to-Multi-Point Radios / LMDS VSAT Features Pout: + dbm Phase Noise: -93 dbc/hz @ 100 khz Typ.
More informationFeatures OBSOLETE. = +25 C, Vdd = +3V to +5V & Vctl = 0/Vdd (Unless Otherwise Stated) Parameter Frequency Min. Typical Max. Units
Typical Applications The HMC288MS8 / HMC288MS8E is ideal for: Cellular PCS, ISM, MMDS WLL applications Functional Diagram 2 LSB GaAs MMIC 3-BIT DIGITAL ATTENUATOR,.7-3.7 GHz Features 2 LSB Steps to 14
More information