ASL 1005P3 Data Sheet Rev: 1.0 Apr 2017
|
|
- Emmeline Walsh
- 5 years ago
- Views:
Transcription
1 ASL P3 Rev:. Apr GHz Frequency Tunable Ultra Low Noise Amplifier Features Frequency Range:.8-4 GHz.7 db typ. NF Tunable Noise match 2 db 4dBm Nominal PdB On-chip DC Blocks -7mA Tunable Bias current.-um InGaAs phemt Technology 6-Pin QFN Plastic Package : 3mmx3mmxmm Functional Diagram Typical Applications Receiver Front End GSM/DCS/PCN/PCS, CDMA, WCDMA Base stations GPRS, EDGE DECT Description ASLP3 is an Ultra Low Noise single stage GaAs MMIC Amplifier combining high gain and state of the art noise figure for GSM/CDMA/WCDMA applications. Excellent.7dB (RF connector loss included) can be achieved in these bands. External tuned inductor enables optimum noise figure match and flexibility in frequency band of operation within.8-4. GHz band. The LNA features 2dB gain with good I/O VSWR in the tuned band. It also features on-chip DC Blocks and biasing flexibility to provide control over current consumption and dynamic range. The device can operate over -7mA Drain current and 3-7V VDD as per specific requirements with minor variation in. The die is fabricated using reliable Low noise.um InGaAs phemt process. This chip is available in low cost 6 pin QFN plastic package. Absolute Maximum Ratings () Parameter Absolute Maximum Units Positive DC Supply 7 V RF Input Power 23 dbm Supply current ma Operating Temperature - to +8 o C Storage Temperature -6 to + o C. Operation beyond these limits may cause permanent damage to the component Page of Phone: Fax: URL:
2 ASL P3 Rev:. Apr 27 Electrical Specifications TA = o C, Zo = Vd = +V, Vg=-.3V, Vg2=+2V Parameter Frequency MHz Units db.9 (.2).7 (.9) db I/P Return Loss -. (-.) () -2.7 (-) () db O/P Return Loss Reverse Isolation db db PdB dbm OIP3 (2) dbm Supply Current (3) Tuning Inductor value Tuning Inductor Part No. Vg Vd Vg Vd ma 6 (2.4) 6 (2.4) V MCI Gold Coil MCI Gold Coil N6XGL 3N6XGL N8XGL N6XGL N6XGL N6XGL N6XGL N6XGL N6XGL nh Note :. Specs in brackets correspond to Inductor values shown in brackets 2. Estimated performance 3. The supply current is tunable between -7mA with minor variation in Page 2 of Phone: Fax: URL:
3 ASL P3 Rev:. Apr 27 Electrical Specifications TA = o C, Zo = Vd = +V, Vg=-.3V, Vg2=+2V Parameter Frequency Bands GHz Unit db db I/P Return Loss db O/P Return Loss db Reverse Isolation db PdB dbm OIP3 () dbm Supply Current (2) ma Tuning Inductor value Vg nh Vd nh Tuning Inductor Part No. Vg N6XGL, 4N3XGL, 3N6XGL, 2N2XGL, N8XGL, N6XGL, N6XGL // 2N2XGL -- Vd N6XGL Note :. Estimated performance 2. The supply current is tunable between -7mA with minor variation in Page 3 of Phone: Fax: URL:
4 ASL P3 Rev:. Apr 27 Measured Test Fixture data Vd =+V, Vg= -.3V, Vg2=+2V, Total Current = ma, T A = o C GHz Band Application (Tuning Inductor values: Vg=4.3nH, Vd= 6.8 nh) DB( S(2,2) ) DB( S(,) ) DB( S(2,) ) Frequency(GHz) GHz Band Application (Tuning Inductor values: Vg=3.6nH, Vd= 6.8 nh) DB( S(2,2) ) DB( S(,) ) DB( S(2,) ) GHz Band Application (Tuning Inductor values: Vg=2.2nH, Vd= 6.8 nh) DB( S(2,2) ) DB( S(,) ) DB( S(2,) ) N3XGL,VD- (4.3 & 6.8 nh) Frequency(GHz) Page 4 of Phone: Fax: URL:
5 ASL P3 Rev:. Apr 27 Measured Test Fixture data Vd =+V, Vg=-.3V, Vg2=+2V, Total Current = ma, T A = o C DB( S(2,2) ) DB( S(,) ) DB( S(2,) ) GHz Applications (Tuning Inductor values Vg=.8nH, Vd= 6.8 nh) Frequency(GHz) DB( S(2,2) ) DB( S(,) ) DB( S(2,) ) GHz Applications (Tuning Inductor values Vg=.6nH, Vd=.6 nh) NF (db) GHz Applications (Tuning Inductor values Vg=.9nH, Vd = nh) DB( S(2,2) ) DB( S(,) ) DB( S(2,) ) NF (db) Page of Phone: Fax: URL:
6 ASL P3 Rev:. Apr 27 Measured Test Fixture data Vd =+V, Vg=-.3V, Vg2=+2V, Total Current = ma, T A = o C Broad Band Performance Plots.8-2. GHz Band Application (.6 &.6nH) (db) db 2GHz DB( S(2,) ) _p3_42mar_png Input Return Loss 3 Input Return Loss -8dB 2GHz (db) DB( S(,) ) _p3_42mar_png Output Return Loss Reverse Isolation OutPut RL (db) Output Return Loss -24 db 2GHz DB( S(2,2) ) _p3_42mar_png Reverse Isolation (db) Reverse Isolation -38dB 2GHz DB( S(,2) ) _p3_42mar_png GHz.736 db.9 GHz.62 db 2. GHz.66 db 2.7 GHz.94 db PdB 2GHz : 4.7dBm PdB 2GHz : 4.7dBm 2 NF (db) Freq (GHz) (db) Pin (dbm) Page 6 of Phone: Fax: URL:
7 ASL P3 Rev:. Apr 27 Measured Test Fixture data T A = o C and variation with bias voltage/current.8-2. GHz Band Application 2GHz Vs Drain Current 2GHz Vs Drain Voltage NF (db).7.6 NF (db) Drain Current (ma) Vd =+V, Vg varied from -.V to -.23V, Vg2 derived from Vd, VD (Volts) Vg=-.3V, Vg2 derived from Vd 2GHz Vs Drain Current 2GHz Vs Drain Voltage (db) (db) Drain Current (ma) Vd =+V, Vg varied from -.V to -.23V, Vg2 derived from Vd, VD (Volts) Vg=-.3V, Vg2 derived from Vd, Page 7 of Phone: Fax: URL:
8 ASL P3 Rev:. Apr 27 Measured Test Fixture data Over Temperature Vd =+V, Vg=-.3V, Vg2=+2V, Total Current = ma o C 24 Vs Frequency and Temperature (db) Ambient 3 +7degC - 4 degc Freq (GHz) Reverse Isolation Vs Frequency and Temperature - - Reverse Isolation Ambient Reverse Isolation+7deg Reverse Isolation- 4 deg Reverse Isolation(dB) Freq (GHz) Page 8 of Phone: Fax: URL:
9 ASL P3 Rev:. Apr 27 Measured Test Fixture data Over Temperature Vd =+V, Vg=-.3V, Vg2=+2V, Total Current = ma o C -2-4 Input Return Loss Vs Frequency and Temperature IP RetLossAmbient IP RetLoss+7degC IP RetLoss-4degC I/P Ret Loss (db) Freq (GHz) Output Return Loss Vs Frequency and Temperature OP RetLossAmbient OP RetLoss+7degC OP RetLoss-4degC O/P Ret Loss (db) Freq (db) Page 9 of Phone: Fax: URL:
10 ASL P3 Rev:. Apr 27 Mechanical Characteristics (6 Pin 3mmx 3mm x mm QFN Package) Units: millimeters Pin Description: Pin 3 : RF in Pin, 6 : Gate Bias Pin : RF out Pin 3, 4 : Drain Bias Pin, 6 : Gate Bias2 Pin,2,4,7,8,9,,2 : Ground Application Circuit Note :. Value of L & L2 should be chosen as per the operating band, as suggested under Electrical Specifications. 2. The First Bypass capacitor C ~ 47pF 3. R=K, R2=K 4..uF should be used as 2nd Bypass Capacitor Page of Phone: Fax: URL:
11 ASL P3 Rev:. Apr 27 Evaluation PCB Units: millimetres List of Components Component ID Value Description / Part No. C 47 pf Bypass capacitor / ATC Dicap 6UK47MTT or equivalent C2. uf 2 nd Bypass Capacitor (42 Pkg.) R K Ohm Resistor in VG2 Bias network (42 Pkg.) R2 K Ohm Resistor in VG2 Bias network (42 Pkg.) L & L2 As per the Table Electrical Specifications Freq. Band Tuning Inductors, 63 Pkg. or Gold Coil Board Material : RT/ Duroid 88 Note:. Input and Output Lines should be of I mpedance. 2. Sufficient numbers of via holes should be provided for good grounding. 3. st bypass of 47 pf should be present immediately after the chip inductors. 4. Vg2 can be applied independently without using R & R2.. Gold Coils can be used instead of chip inductors, with values as per the table. 6. Two -mil (.4mm) bond wires of minimum length should be used for RF input and Output. 7. Evaluation PCB is available from ASL upon request. GaAs MMIC devices are susceptible to Electrostatic discharge. Proper precautions should be observed during handling, assembly & testing All information and Specifications are subject to change without prior notice Page of Phone: Fax: URL:
1.0 6 GHz Ultra Low Noise Amplifier
1.0 6 GHz Ultra Low Noise Amplifier Features Frequency Range: 1.0-6 GHz 0.7 db mid-band Noise Figure 18 db mid band Gain 13dBm Nominal P1dB Bias current : 50mA 0.15-um InGaAs phemt Technology 16-Pin QFN
More information0.5-4GHz Low Noise Amplifier
ASL P3.5-4GHz Low Noise Amplifier Features Frequency Range:.5-4 GHz Better than 2.dB Noise Figure Single supply operation db Nominal Gain dbm Nominal P1dB Input Return Loss > db Output Return Loss > db
More informationGHz Low Noise Amplifier
8.0-12.0 GHz Low Noise Amplifier Features Frequency Range : 8.0-12.0 GHz Low Noise Figure < 1.7 db 26 db nominal gain 12 dbm P 1dB High IP3 Input Return Loss > 10 db Output Return Loss > 10 db DC decoupled
More information0.5-4GHz Low Noise Amplifier
.5-4GHz Low Noise Amplifier Features Frequency Range:.5-4 GHz Better than 2.dB Noise Figure Single supply operation db Nominal Gain dbm Nominal P1dB Input Return Loss > db Output Return Loss > db DC decoupled
More information9-10 GHz LOW NOISE AMPLIFIER
9-10 GHz LOW NOISE AMPLIFIER Features Frequency Range 9-10GHz Low Noise Figure < 1.38 db High Gain 28 ± 0.4dB Input Return Loss > 10dB. Output Return Loss > 13dB. 10 dbm is Nominal P1dB 20 dbm OIP3 No
More informationGHz Ultra-wideband Amplifier
.-3 GHz Ultra-wideband Amplifier Features Frequency Range :. 3.GHz 11. db Nominal gain Gain Flatness: ±2. db Input Return Loss > 1 db Output Return Loss > 1 db DC decoupled input and output.1 µm InGaAs
More information8 11 GHz 1 Watt Power Amplifier
Rev. 1.1 December 2 GHz 1 Watt Power Amplifier Features Frequency Range : GHz 3 dbm output P1dB. db Power gain 3% PAE High IP3 Input Return Loss > db Output Return Loss > db Dual bias operation No external
More information2 40 GHz Ultra-Wideband Amplifier
AMT217511 Rev. 1. January 28 2 4 GHz Ultra-Wideband Amplifier Features Frequency Range: 2-4 GHz 7±1. db Nominal Gain Input Return Loss > 1 db Output Return Loss > 1 db Reverse Isolation > 3dB 5 dbm Nominal
More informationGHz Broadband Low Noise Amplifier
.5 4. GHz Broadband Low Noise Amplifier Features Frequency Range:.5-4 GHz 1.8 db Mid-band Noise Figure 12.5 db Nominal Gain Very Low operating current (2V/15mA) Ideal Replacement for discrete devices 1dBm
More information8-18 GHz Wideband Low Noise Amplifier
8-18 GHz Wideband Low Noise Amplifier Features Frequency Range : 8.0 18.0GHz 23dB Nominal gain Low Midband Noise Figure < 2 db Input Return Loss > 12 db Output Return Loss > 12 db Single +3V Operation
More informationGHz 10 Watt Power Amplifier
ASL 1 8. 1 GHz 1 Watt Power Amplifier Features Frequency Range : 8. 1GHz. dbm Psat 14 db Power gain 27% PAE High IP3 Input Return Loss > 1 db Output Return Loss > 9 db Dual bias operation DC decoupled
More information5 6.4 GHz 2 Watt Power Amplifier
5 6.4 GHz 2 Watt Power Amplifier Features Frequency Range : 5 6.4GHz 32.5 dbm output P1dB 9 db Power gain 32% PAE High IP3 Input Return Loss > 12 db Output Return Loss > 12 db Dual bias operation No external
More informationGHz Voltage Variable Attenuator (Absorptive)
Rev.. February 27.5-2.GHz Voltage Variable Attenuator (Absorptive) Features Single Positive Voltage Control: to +5V. 3dB Attenuation Range Low Insertion Loss I/O VSWR
More information1-22 GHz Wideband Amplifier
1-22 GHz Wideband Amplifier Features Frequency Range : 1. 22.GHz 12dB Nominal gain Noise Figure: 2.1 @ 8GHz P1 db: 1 dbm at 1GHz. Input Return Loss > 12 db Output Return Loss > 12 db DC decoupled input
More informationDC-12 GHz Tunable Passive Gain Equalizer
DC-12 GHz Tunable Passive Gain Equalizer AMT1753011 Features Frequency Range : DC-12 GHz 6 db insertion loss Tunable gain slope (+0.5dB/GHz to -0.2 db/ghz) Input Return Loss > 8 db Output Return Loss >
More information18-40 GHz Low Noise Amplifier
18-40 GHz Low Noise Amplifier AMT2172011 Features Frequency Range: 18-40 GHz Better than 4.5 db Noise Figure Single supply operation DC decoupled Input and Output 10 db Nominal Gain 6dBm Nominal P1dB Input
More information5 6 GHz 10 Watt Power Amplifier
5 6 GHz 10 Watt Power Amplifier Features Frequency Range : 5 6GHz 40 dbm Output Power 18 db Power gain 30% PAE High IP3 Input Return Loss > 12 db Output Return Loss > 7.5 db Dual bias operation No external
More information9-10 GHz GaAs MMIC Core Chip
9-10 GHz GaAs MMIC Core Chip Features Functional Diagram Frequency Range: 9GHz 10GHz Tx Small Signal Gain: 28dB Rx Small Signal Gain: 4dB Tx Output P1dB : 22dBm Tx Output Psat : 23dBm Input Return Loss
More information11-15 GHz 0.5 Watt Power Amplifier
11-15 GHz 0.5 Watt Power Amplifier Features Frequency Range : 11-15GHz 27.5 dbm output Psat 13 db Power gain 25% PAE High IP3 Input Return Loss > 11 db Output Return Loss > 6 db Dual bias operation No
More informationS Band 7 Bit Digital Attenuator
S Band 7 Bit Digital Attenuator Features Frequency Range: 2.8-3.8 GHz Low Insertion Loss 4 db(typ.) Max. Attenuation of 31.75 db RMS Amplitude Error < 0.3 db Input & Output Return Loss > 12 db 32 Lead
More informationData Sheet. AMMP GHz High Gain Amplifier in SMT Package. Description. Features. Applications. Package Diagram. Functional Block Diagram
AMMP- GHz High Gain Amplifier in SMT Package Data Sheet Description The AMMP- MMIC is a GaAs wide-band amplifier in a surface mount package designed for medium output power and high gain over the - GHz
More information9-10 GHz GaAs MMIC Core Chip
9-10 GHz GaAs MMIC Core Chip Features Functional Diagram Frequency Range: 9GHz 10GHz Tx Small Signal Gain: 28dB Rx Small Signal Gain: 4dB Tx Output P 1dB : 22dBm Tx Output P sat : 23dBm Input Return Loss
More information6-18 GHz Double Balanced Mixer
6-18 GHz Double Balanced Mixer Features Functional Diagram Passive Double Balanced Topology Low Conversion loss Excellent Isolations between all ports IF Bandwidth of DC to 4GHz 0.15-µm InGaAs phemt Technology
More informationMMA GHz 1W Traveling Wave Amplifier Data Sheet
Features: Frequency Range:.1 2 GHz P3dB: +29 dbm Gain: 12.5 db Vdd =12 V Ids =5 ma Input and Output Fully Matched to 5 Ω Applications: Fiber optics communication systems Microwave and wireless communication
More information4-8 GHz Low Noise Amplifier
4-8 GHz Low Noise Amplifier Features Functional Block Diagram Ultra low noise figure High gain broadband performance Single supply voltage: +4. V @ 75 ma Pb-free RoHs compliant 3x3 QFN package Description
More informationFeatures. = +25 C, Vdd1, 2, 3 = 5V, Idd = 250 ma*
v.4 HMC498LC4 Typical Applications Features The HMC498LC4 is ideal for use as a LNA or Driver amplifier for: Point-to-Point Radios Point-to-Multi-Point Radios & VSAT Test Equipment & Sensors Military End-Use
More informationCHA2098b RoHS COMPLIANT
CHA98b RoHS COMPLIANT -4GHz High Gain Buffer Amplifier GaAs Monolithic Microwave IC Description Vd1 Vd2,3 The CHA98b is a high gain broadband threestage monolithic buffer amplifier. It is designed for
More informationCMD119P GHz Low Noise Amplifier. Features. Functional Block Diagram. Description. Electrical Performance - V dd = 3.6 V, T A = 25 o C, F=8GHz
Features Functional Block Diagram Ultra low noise figure Low current consumption High gain broadband performance Single supply voltage: +3.6 V @ 3 ma Pb-free RoHs compliant 3x3 QFN package Description
More information2 18GHz Double Balanced Ring Mixer
2 18GHz Double Balanced Ring Mixer Features RF/LO Frequency: 2 18GHz IF bandwidth: DC 75MHz Nominal LO drive of 7-13dBm Low Conversion Loss: 4dB High Port to Port Isolation High IIP3 Nominal bias: 5V @1mA.15-µm
More informationFeatures. = +25 C, Vs = +5V. Parameter Min. Typ. Max. Min. Typ. Max. Units Frequency Range MHz Gain
Typical Applications Functional Diagram The HMC32LP3 / HMC32LP3E is ideal for basestation receivers: GSM, GPRS & EDGE CDMA & W-CDMA Private Land Mobile Radio HMC32LP3 / 32LP3E AMPLIFIER, 00-1000 MHz Features
More informationCMD157P GHz Low Noise Amplifier. Features. Functional Block Diagram. Description. Electrical Performance - V dd = 3.
Features Functional Block Diagram Ultra low noise figure High gain broadband performance Single supply voltage: +3. V @ 52 ma Pb-free RoHs compliant 3x3 QFN package Description The CMD7P3 is a broadband
More informationCMD132P GHz Low Noise Amplifier. Features. Functional Block Diagram. Description. Electrical Performance - V dd = 3.
Features Functional Block Diagram Ultra low noise figure Low current consumption High gain broadband performance Single supply voltage: +3.6 V @ 3 ma Pb-free RoHs compliant 3x3 QFN package Description
More informationMMA GHz 4W MMIC Power Amplifier Data Sheet
Features: Frequency Range: 27 33 GHz P1dB: +36 dbm IM3 Level: -38 dbc @Po=20dBm/tone Gain: 22 db Vdd = 6V Idsq = 1500 to 2800mA Input and Output Fully Matched to 50 1 2 3 4 5 32 31 30 29 28 27 26 25 24
More informationCHA5294 RoHS COMPLIANT
30-40GHz Medium Power Amplifier GaAs Monolithic Microwave IC CHA5294 RoHS COMPLIANT Description The CHA5294 is a high gain four-stage monolithic medium power amplifier. It is designed for a wide range
More informationENGDA Wideband Distributed Amplifier, DIE, 0.8 to 20 GHz ENGDA Features. Typical Applications. Description. Functional Block Diagram
Typical Applications ENGDA00072 Wideband Distributed Amplifier, DIE, 0.8 to 20 GHz ENGDA00072 Features Military EW and SIGINT Receiver or Transmitter Telecom Infrastructure Space Hybrids Test and Measurement
More informationCMD170P GHz Driver Amplifier. Features. Functional Block Diagram. Description
Features Functional Block Diagram High output power On-chip detector All positive bias Pb-free RoHs compliant 4x4 QFN package Description The CMD170P4 is a GaAs MMIC driver amplifier housed in a leadless
More informationMMA C3 6-22GHz, 0.1W Gain Block Data Sheet
Features: Frequency Range: 6 22 GHz P1dB: 18.5 dbm @Vdd=5V P3dB: 19.5 dbm @Vdd=5V Gain: 14 db Vdd =3 to 6 V Ids = 130 ma Input and Output Fully Matched to 50 Ω Applications: Communication systems Microwave
More informationCHA2159 RoHS COMPLIANT
RoHS COMPLIANT 55-65GHz Low Noise / Medium Power Amplifier GaAs Monolithic Microwave IC Description The CHA2159 is a four - stage low noise and medium power amplifier. It is designed for a wide range of
More informationMMA M4. Features:
Features: Frequency Range: 0.1 26.5 GHz P3dB: +27 dbm Gain: 12.5 db Vdd =8 to 12 V Ids =250 to 500 ma Input and Output Fully Matched to 50 Ω Surface Mount, RoHs Compliant QFN 4x4mm package Applications:
More informationMMA M GHz, 1W MMIC Power Amplifier Data Sheet
Features: Frequency Range: 37-41 GHz P1dB: +30.5 dbm IM3 Level: -41 dbc @Po=18dBm/tone Gain: 22 db Vdd = 4 to 6 V Idsq = 1000 to 2000 ma Input and Output Fully Matched to 50 Ω Integrated power detector
More informationCMD167P GHz Low Noise Amplifier. Features. Functional Block Diagram. Description. Electrical Performance - V dd = 3.0 V, T A = 25 o C, F=12 GHz
Features Functional Block Diagram Low noise figure Low current consumption Single positive supply voltage Pb-free RoHs compliant 3x3 QFN package Description The CMD167P3 is a broadband MMIC low noise amplifier
More informationFeatures. = +25 C, Vdd = +15V, Vgg2 = +9.5V [1], Idq = 500 ma [2]
v3.41 Typical Applications Features The is ideal for: Test Instrumentation Military & Space Fiber optics Functional Diagram P1dB Output Power: + dbm Psat Output Power: + dbm High Gain: db Output IP3: 42
More informationCMD283C GHz Ultra Low Noise Amplifier. Features. Functional Block Diagram. Description
Features Functional Block Diagram Ultra low noise figure High gain broadband performance Low power dissipation Pb-free RoHs compliant 3x3 QFN package Description The CMD283C3 is a broadband MMIC low noise
More informationCMD158P GHz Driver Amplifier. Features. Functional Block Diagram. Description. Electrical Performance - V dd = 5.
Features Functional Block Diagram Broadband performance High output power Low current consumption Single supply voltage: +5.0 V @ 95 ma Pb-free RoHs compliant 3x3 QFN package Description The CMD8P3 is
More information17-24 GHz Linear Driver Amplifier. S11 and S22 (db) -15
Pout (dbm) or OTOI (dbm) S21 (db) S11 and S22 (db) 17-24 GHz Linear Driver Amplifier Key Features Frequency Range: 17-24 GHz 25.5 dbm Nominal Psat, 23.5 dbm Nominal P1dB Gain: 20 db OTOI: 33 dbm Typical
More information2-20 GHz Driver Amplifier
2-2 GHz Driver Amplifier Features Functional Block Diagram Wide bandwidth High linearity Low current consumption Pb-free RoHs compliant 4x4 mm SMT package Description The CMD187C4 is a wideband driver
More informationFeatures. = +25 C, Vdd = +5V, Rbias = 10 Ohms*
Typical Applications Functional Diagram The HMC36LP3 / HMC36LP3E is ideal for: Cellular/3G Infrastructure Base Stations & Repeaters CDMA, W-CDMA, & TD-SCDMA Private Land Mobile Radio GSM/GPRS & EDGE UHF
More informationFeatures OBSOLETE. Saturated Output Power (Psat) dbm Output Third Order Intercept (IP3) dbm Supply Current (Idd) ma
7 Typical Applications The HMC667LP2(E) is ideal for: WiMAX, WiBro & Fixed Wireless SDARS & WLAN Receivers Infrastructure & Repeaters Access Points Telematics & DMB Functional Diagram v2.11 Electrical
More informationFeatures. Parameter* Min. Typ. Max. Units Frequency Range GHz Gain 2 5 db. Gain Variation over Temperature
v3.1 HMC59MSGE AMPLIFIER,. -.9 GHz Typical Applications The HMC59MSGE is ideal for: DTV Receivers Multi-Tuner Set Top Boxes PVRs & Home Gateways Functional Diagram Features Single-ended or Balanced Output
More informationFeatures. Gain: 14.5 db. Electrical Specifications [1] [2] = +25 C, Rbias = 825 Ohms for Vdd = 5V, Rbias = 5.76k Ohms for Vdd = 3V
Typical Applications The HMC77ALP3E is ideal for: Fixed Wireless and LTE/WiMAX/4G BTS & Infrastructure Repeaters and Femtocells Public Safety Radio Access Points Functional Diagram Features Noise Figure:.
More informationFeatures. = +25 C, Vdd= 8V, Idd= 75 ma*
HMC46LC5 Typical Applications v3.11 AMPLIFIER, DC - 2 GHz Features The HMC46LC5 is ideal for: Noise Figure: 2.5 db @ 1 GHz Telecom Infrastructure Microwave Radio & VSAT Military & Space Test Instrumentation
More informationDC-10GHz SPDT Reflective Switch
RF_IN AMT254212 Rev. 1.1 January 216 DC-1GHz SPDT Reflective Switch Features DC-1GHz Wide band operation Low Insertion Loss ~ 1.5dB typ @ 8GHz High Isolation ~ 48dB @ 1GHz I/O VSWR < 1. 6 : 1 P 1dB (in)
More informationHMC618ALP3E AMPLIFIERS - LOW NOISE - SMT. GaAs SMT phemt LOW NOISE AMPLIFIER, GHz. Typical Applications. Features. Functional Diagram
7 Typical Applications The is ideal for: Cellular/3G and LTE/WiMAX/4G BTS & Infrastructure Repeaters and Femto Cells Public Safety Radios Functional Diagram v. Electrical Specifications T A = + C, Rbias
More informationFeatures. = +25 C, Vdd= 5V, Vgg2= Open, Idd= 60 ma*
v.7 HMCLH AGC AMPLIFIER, - GHz Typical Applications The HMCLH is ideal for: Telecom Infrastructure Microwave Radio & VSAT Military EW, ECM & C I Test Instrumentation Fiber Optics Functional Diagram Features
More informationHMC997LC4. Variable Gain Amplifier - SMT. VARIABLE GAIN AMPLIFIER GHz. Typical Applications. General Description. Functional Diagram
v2.14 Typical Applications The is ideal for: Point-to-Point Radio Point-to-Multi-Point Radio EW & ECM Subsystems Ka-Band Radar Test Equipment Functional Diagram Features Wide Gain Control Range: 1 db Single
More informationMMA R4 30KHz-50GHz Traveling Wave Amplifier Data Sheet October 2012
Features: Frequency Range: 30KHz 40 GHz P1dB: +22 dbm Vout: 7V p-p @50Ω Gain: 13.5 db Vdd =7 V Ids = 200 ma Input and Output Fully Matched to 50 Ω In 4x4mm QFN package Applications: Fiber optics communication
More informationCMD187C GHz Driver Amplifier. Features. Functional Block Diagram. Description
Features Functional Block Diagram Wide bandwidth High linearity Low current consumption Pb-free RoHs compliant 4x4 mm SMT package Description The CMD187C4 is a wideband driver amplifier housed in a leadless
More informationFeatures OBSOLETE. = +25 C, Rbias = 0 Ohm. Bypass Mode Failsafe Mode Parameter
7 Typical Applications The HMC668LP3(E) is ideal for: Cellular/3G and LTE/WiMAX/4G BTS & Infrastructure Repeaters and Femtocells Tower Mounted Amplifiers Test & Measurement Equipment Functional Diagram
More informationCHA2395 RoHS COMPLIANT
RoHS COMPLIANT 36-40GHz Low Noise Very High Gain Amplifier GaAs Monolithic Microwave IC Description The CHA239 is a four-stage monolithic low noise amplifier. It is designed for a wide range of applications,
More informationFeatures. = +25 C, Vdd = +7V, Idd = 1340 ma [1]
Typical Applications The HMC591LP5 / HMC591LP5E is ideal for use as a power amplifi er for: Point-to-Point Radios Point-to-Multi-Point Radios Test Equipment & Sensors Military End-Use Space Features Saturated
More informationMMA GHz, 0.1W Gain Block Data Sheet
Features: Frequency Range: 6 22 GHz P1dB: 18.5 dbm @Vds=5V Psat: 19.5 dbm @ Gain: 14 db Vdd =3 to 6 V Ids = 13 ma Input and Output Fully Matched to 5 Ω Applications: Communication systems Microwave instrumentations
More information2 3 ACG1 ACG2 RFIN. Parameter Min Typ Max Units Frequency Range
Features Functional Block Diagram Ultra wideband performance High linearity High output power Excellent return losses Small die size 2 3 ACG1 ACG2 RFOUT & Vdd Description RFIN 1 The is wideband GaAs MMIC
More informationCMD158C GHz Driver Amplifier. Features. Functional Block Diagram. Description. Electrical Performance - V dd = 5.0 V, T A = 25 o C, F = 11 GHz
Features Functional Block Diagram Broadband performance High output power Low current consumption Single supply voltage: +5.0 V @ 95 ma Pb-free RoHs compliant 4x4 QFN package Description The CMD158C4 is
More informationPreliminary DATA SHEET VWA Product-Line
VWA 0000949 AA 7-13 GHz Low noise amplifier QFN MMIC Features General description The VWA 0000949 AA is a low noise amplifier MMIC operating in the frequency range 7 to 13 GHz. The device is packaged in
More informationCMD GHz GaN Low Noise Amplifier. Features. Functional Block Diagram. Description
Features Functional Block Diagram Ultra wideband performance Low noise figure High RF power survivablility Low current consumption Small die size Vdd Vgg2 RFOUT Description RFIN The CMD2 is a wideband
More informationCMD GHz Low Noise Amplifier. Functional Block Diagram. Features. Description
33- GHz Low Noise Amplifier Features Functional Block Diagram Ultra low noise performance All positive bias Low current consumption Small die size 2 3 Vgg GB RFIN Vdd RFOUT Description The CMD9 is a highly
More informationAnalog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED
Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED www.analog.com www.hittite.com THIS PAGE INTENTIONALLY LEFT BLANK v1.14 AMPLIFIER, 18-4 GHz Typical
More information0.5-20GHz Driver. GaAs Monolithic Microwave IC
CHA422-98F.-2GHz Driver GaAs Monolithic Microwave IC Description The CHA422-98F is a distributed driver amplifier which operates between. and 2GHz. It is designed for a wide range of applications, such
More information1-24 GHz Distributed Driver Amplifier
Features Functional Block Diagram Wide bandwidth High linearity Single positive supply voltage On chip bias choke Description The CMD197C4 is a wideband GaAs MMIC driver amplifier housed in a leadless
More informationData Sheet. MGA-635T6 GPS Low Noise Amplifier with Variable Bias Current and Shutdown Function 3FYM. Description. Features.
MGA-T GPS Low Noise Amplifier with Variable Bias Current and Shutdown Function Data Sheet Description Avago Technologies MGA-T is a LNA designed for GPS/ISM/Wimax applications in the (.9-.)GHz frequency
More informationTGA2521-SM GHz Linear Driver Amplifier. Key Features. Measured Performance
17-24 GHz Linear Driver Amplifier Key Features Frequency Range: 17-24 GHz 25.5 dbm Nominal Psat, 23.5 dbm Nominal P1dB Gain: 20 db OTOI: 33 dbm Typical Bias: Vd = 5 V, Idq = 320 ma, Vg = -0.5 V Typical
More informationCMD217. Let Performance Drive GHz GaN Power Amplifier
Let Performance Drive Features High Power High linearity Excellent efficiency Small die size Applications Ka-band communications Commercial satellite Military and space Description Functional Block Diagram
More information2 3 ACG1 ACG2 RFIN. Parameter Min Typ Max Units Frequency Range
Features Functional Block Diagram Ultra wideband performance High linearity High output power Excellent return losses Small die size 2 3 ACG1 ACG2 RFOUT & Vdd Description RFIN 1 The CMD29 is wideband GaAs
More informationTGA2521-SM GHz Linear Driver Amplifier Key Features Measured Performance
17-24 GHz Linear Driver Amplifier Key Features Frequency Range: 17-24 GHz 25.5 dbm Nominal Psat, 23.5 dbm Nominal P1dB Gain: 20 db OTOI: 33 dbm Typical Bias: Vd = 5 V, Idq = 320 ma, Vg = -0.5 V Typical
More informationCHA2095a RoHS COMPLIANT
CHA295a RoHS COMPLIANT 36-4GHz Low Noise Very High Gain Amplifier GaAs Monolithic Microwave IC Description The CHA295a is a four-stage monolithic low noise amplifier. It is designed for a wide range of
More informationMLA-01122B-H GHz Low Noise MMIC Amplifier in Hermetic Package
Features: Wide Frequency Range: 1.0 to 1 Excellent NF : 1.6 db @ 6.0 GHz High Gain: 17 db @ P-1dB: 16 dbm @ OIP3: 27 dbm @ Bias Condition: VDD = 5 V and IDD = 55 ma 50-Ohm On-chip Matching Unconditionally
More informationData Sheet. AMMP to 32 GHz GaAs Low Noise Amplifier. Description. Features. Specifications (Vd=3.0V, Idd=65mA) Applications.
AMMP-6233 18 to 32 GHz GaAs Low Noise Amplifier Data Sheet Description Avago Technologies AMMP-6233 is a high gain, lownoise amplifier that operates from 18 GHz to 32 GHz. It has a 3 db noise figure, over
More informationCHA2293 RoHS COMPLIANT
RoHS COMPLIANT 24-30GHz Low Noise, Variable Gain Amplifier GaAs Monolithic Microwave IC Description The CHA2293 is a high gain four-stage monolithic low noise amplifier with variable gain. It is designed
More informationFeatures. = +25 C, Vdd 1, 2, 3 = +3V
v.11 HMC6LC AMPLIFIER, 6-2 GHz Typical Applications The HMC6LC is ideal for use as a LNA or driver amplifier for: Point-to-Point Radios Point-to-Multi-Point Radios & VSAT Test Equipment and Sensors Military
More information6-18 GHz Low Phase Noise Amplifier
-1 GHz Low Phase Noise Amplifier Features Functional Block Diagram Wide bandwidth Low phase noise Low current consumption Pb-free RoHs compliant 4x4 mm SMT package Description The CMD24C4 is a wideband
More informationHMC599ST89 / 599ST89E. Features. The HMC599ST89(E) is ideal for: = +25 C MHz. Gain Variation Over Temperature MHz 0.
HMCST / STE Typical Applications v2.3 GaAs phemt MMIC LNA, Ohm - 1 MHz Features The HMCST(E) is ideal for: High P1 Output Power: +1 m VHF / UHF Antennas HDTV Receivers CMTS Equipment CATV, Cable Modem
More information16-32GHz Low Noise Amplifier. GaAs Monolithic Microwave IC in SMD package
Linear Gain Description GaAs Monolithic Microwave IC in SMD package The is a three-stage self-biased wide band monolithic low noise amplifier. The circuit is manufactured with a standard phemt process:
More information7-12GHz LNA. GaAs Monolithic Microwave IC. S21 (db)
S21 (db) NF (db) GaAs Monolithic Microwave IC Description The is a monolithic two-stages wide band low noise amplifier circuit. It is self-biased. It is designed for military, space and telecommunication
More informationCMD158P GHz Driver Amplifier. Features. Functional Block Diagram. Description. Electrical Performance - V dd = 5.
Features Functional Block Diagram Broadband performance High output power Low current consumption Single supply voltage: +5.0 V @ 95 ma Pb-free RoHs compliant 3x3 QFN package Description The CMD8P3 is
More informationMMA M GHz 4W MMIC Power Amplifier Data Sheet
Features: Frequency Range: 27 33 GHz P1dB: +36 dbm IM3 Level: -38 dbc @Po=20dBm/tone Gain: 22 db Vdd = 6V Idsq = 1500 to 2800mA Input and Output Fully Matched to 50 Ω Surface Mount, RoHs Compliant QFN
More informationFeatures. Gain: 17 db. OIP3: 25 dbm. = +25 C, Vdd 1, 2 = +3V
v.7 HMCLC Typical Applications The HMCLC is ideal for use as a LNA or driver amplifier for: Point-to-Point Radios Point-to-Multi-Point Radios & VSAT Test Equipment and Sensors Military & Space Functional
More informationFeatures. = +25 C, Vdd = +10 V, Idd = 350 ma
HMC97APME v2.4 POWER AMPLIFIER,.2-22 GHz Typical Applications The HMC97APME is ideal for: Test Instrumentation Military & Space Functional Diagram Features High P1dB Output Power: + dbm High : 14 db High
More information400 MHz to 4000 MHz ½ Watt RF Driver Amplifier ADL5324
Data Sheet FEATURES Operation from MHz to MHz Gain of 14.6 db at 21 MHz OIP of 4.1 dbm at 21 MHz P1dB of 29.1 dbm at 21 MHz Noise figure of.8 db Dynamically adjustable bias Adjustable power supply bias:.
More informationTGA2602-SM MHz High IP3 Dual phemt. Key Features and Performance. Measured Performance. Primary Applications. Product Description
800-3000 MHz High IP3 Dual phemt Key Features and Performance 800-3000 MHz Frequency Range
More informationData Sheet. AMMP to 32 GHz GaAs High Linearity LNA in SMT Package. Description. Features. Specifications (Vdd = 4.
AMMP-622 18 to 2 GHz GaAs High Linearity LNA in SMT Package Data Sheet Description Avago s AMMP-622 is an easy-to-use broadband, high gain, high linearity Low Noise Amplifier in a surface mount package.
More informationData Sheet AMMC KHz 80 GHz TWA. Description. Features. Typical Performance (Vd=5V, Idsq=0.1A) Component Image.
AMMC-525 3KHz 8 GHz TWA Data Sheet Description The AMMC-525 MMIC is a 3KHz to 8GHz ultra broadband traveling wave amplifier. In this operational frequency band, AMMC-525 provides 8dB gain with better than
More informationFeatures. Output Power for 1 db Compression (P1dB) dbm Saturated Output Power (Psat) dbm
v1.314 Typical Applications Features The is ideal for: Test Instrumentation Microwave Radio & VSAT Telecom Infrastructure Military & Space Fiber optics Functional Diagram P1dB Output Power: +27 dbm Psat
More informationMGA-634P8 Ultra Low Noise, High Linearity Low Noise Amplifier. Features. Specifications. Applications. RFin
MGA-3P8 Ultra Low Noise, High Linearity Low Noise Amplifier Data Sheet Description Avago Technologies MGA-3P8 is an economical, easyto-use GaAs MMIC Low Noise Amplifier (LNA). The LNA has low noise and
More informationCMD GHz Low Noise Amplifier. Features. Functional Block Diagram. Description
Features Functional Block Diagram Ultra low noise performance High linearity Small die size 2 GB 3 Vgg Vdd 4 RFIN RFOUT Description The CMD63 is a high dynamic range GaAs MMIC low noise amplifier ideally
More informationCMD233C GHz Distributed Low Noise Amplifier. Features. Functional Block Diagram. Description
Features Functional Block Diagram Wide bandwidth Single positive supply voltage Low noise figure Pb-free RoHs compliant 4x4 QFN package Description The CMD233C4 is a wideband GaAs MMIC low noise amplifier
More informationMMA R GHz, 0.1W Gain Block Data Sheet October, 2012
Features: Frequency Range: 17 43 GHz P1dB: 18 dbm Psat: 2 dbm Gain: 21 db Vdd =4.5 V (3 V to 5 V) Ids = 25 ma (15mA to 3mA) Input and Output Fully Matched to 5 Ω 2x and 3x Frequency multiplier applications
More informationFeatures. = +25 C, Vdd = +5V, Idd = 400mA [1]
v.61 Typical Applications The is ideal for: Point-to-Point Radios Point-to-Multi-Point Radios VSAT Military & Space Features Saturated Output Power:.5 dbm @ 21% PAE High Output IP3: 34.5 dbm High Gain:.5
More informationCHA2194 RoHS COMPLIANT
RoHS COMPLIANT 3-GHz Low Noise Amplifier Self biased GaAs Monolithic Microwave IC Description The circuit is a three-stage self biased wide band monolithic low noise amplifier, designed for 3GHz to GHz
More informationMAAL Low Noise Amplifier GHz. Features. Functional Block Diagram. Description. Pin Configuration 1. Ordering Information 2,3 N/C
MAAL-4.1-3. GHz Features Single Voltage Supply 3V ~ V Integrated Active Bias Circuit Adjustable Current with an External Resistor Low Noise Figure High Linearity OIP3, 34 dbm @ 2 GHz Broadband Match Integrated
More informationGaAs MMIC devices are susceptible to Electrostatic Discharge. Use proper ESD precautions when handling these items.
ADM-12-931SM The ADM-12-931SM is a small, low power, and economical T3 driver or T3A pre-amplifier. It is a GaAs PHEMT distributed amplifier in a 3mm QFN surface mount package. The ADM-12-931SM can provide
More information