CT mm Jointer Planer. Axminster Devon EX13 5HU UK (International Dialling ) WAXMINSTER
|
|
- Lynne Hart
- 5 years ago
- Views:
Transcription
1 CT mm Jointer Planer WAXMINSTER W H I T E Axminster Devon EX13 5HU UK (International Dialling ) WAXMINSTER W H I T E
2 Index of Contents Parts List (Base Assembly) Continued Page No. Index of Contents... 2 Declaration of Conformity... 2 What s in the Box General Instructions for 230v Machines...3,4 Specific Instructions for Jointer Planer...4,5 Specifications Assembly & Adjustment. Unpacking and Cleaning Assembling Jointer to Stand Fitting the Drive Belt Fitting the Belt Guard Fitting the Cutter Guard Fitting and Adjusting the Fence Fitting the Rear Cutter Guard Adjusting the Tables and Cutterblock Adjusting the Table Gibs Setting the Knives Dust Extraction... 5,6,7,8,9 Machine Illustration and Parts Description...10,11,12 Operating Instructions...13,14 Parts Breakdown (Fence Assembly) Parts List (Fence Assembly) Parts Breakdown (Cutter Block Assembly)...17 Parts List (Cutter Block Assembly)...18 Parts Breakdown (Stand Assembly)...19 Parts List (Stand Assembly) Parts Breakdown (Base Assembly)...21 Parts List (Base Assembly)...22,23 Declaration of Conformity The undersigned, L.Chang authorised by Chiu Ting Machinery Co., Ltd. No. 78. Yuang Feng Rd. Taiping, Taiwan Hsien Taiwan, R.O.C. declares that this product: CT-150 Planer (Jointer) manufactured by Chiu Ting Machinery Co. is in compliance with the following standards or standardisation documents in accordance with Council Directives 98/37/EC 73/23/EEC 02 23
3 Parts List (Base Assembly) What s in the Box? The CT150 planer is supplied in two boxes, one for the stand and the other for the planer, fence, guard, hardware, etc. Quantity Item Model Number CT-150 Box 1 1 No. Stand 1 No. Access panel 1 No. Drive Belt Box 2 1 No. Planer 1 No. Fence Assembly 1 No. Cutter Guard (Aluminium extrusion) 1 No. Cutter Guard Arm 1 No. Rear Cutter Guard 2 No. Table Control Wheels 1 No. Belt Guard 2 No. Dust Extraction Outlet 2 No. Packets of Hardware 1 No. Instruction Manual 1 No. Guarantee Card General Instructions for 230v Machines Good Working Practices/Safety The following suggestions will enable you observe good working practices, keep yourself and fellow workers safe and maintain your tools and equipment in good working order.! Electrical WARNING!! KEEP TOOLS AND EQUIPMENT OUT OF THE REACH OF YOUNG CHILDREN UNLESS SUPERVISED. Check that the mains power supply is earthed Regularly check the mains lead and plug for damage Ensure that a fuse of the correct amperage is fitted to the plug Ensure that any extension lead used is correctly rated to suit the machine or power tool Ensure that the power lead and any extension lead is kept clear of the blades or other sharp obstacles Do not use electrical machines or power tools in wet or damp areas or locations 22 03
4 General Instructions for 230v Machines (Continued) Parts Breakdown (Base Assembly) If a replacement mains plug is fitted at any time this must be of the appropriate size and fitted with the correct size of fuse. General Mount the machine on a flat level bench or surface. Secure the machine to the surface where applicable. Always use machines or power tools in an uncluttered area. To reduce the risk of accidents, avoid leaving materials or other items within the working area and allow clear access to all machine parts and controls. Clean machines by wiping with a damp soapy cloth. Do not use solvents or cleaners that may damage plastic parts or painted/coated surfaces. Keep water and solvents away from all electrical components, leads and plugs. When storing or leaving tools for any length of time, spray bare metal surfaces with Axminster XMP protective spray to minimise surface corrosion. Always isolate machines and power tools from the power supply when not in use or when changing parts, cutters and blades or when making any adjustments. Before using any machine or power tool, ensure that all locking-nuts, chucks etc, are tightened and secure. Check that all loose keys, spanners and other tools have been removed. Always ensure that long hair is tied back or retained by a band, hat or safety helmet. Remove all loose jewellery to prevent it from catching in rotating parts of the machine. Always check that the correct machining or cutting speed has been selected. Do not operate machinery or power tools when tired or under the influence of alcohol, drugs or certain medicines. WHEN USING MACHINES ALWAYS WEAR SUITABLE EYE PROTECTION, EAR DEFENDERS AND DUST OR FUME INHALATION PROTECTION. WARNING!! KEEP TOOLS AND EQUIPMENT OUT OF THE REACH OF CHILDREN, UNLESS THEY ARE UNDER SUPERVISION. Specific Safety Instructions for Jointer Planers Keep the cutting blades sharp and free from resin and other residue Always use a push stick or push block to keep your fingers away from the cutting block. When planing narrow timber ensure that the exposed part of the cutter block is fully guarded. Do not attempt to process timber less than 200mm long, 20mm wide or 6mm thick
5 Parts List (Stand Assembly) Spcific Safety Instructions for Jointer Planer (Continued) Maintain the correct relationship between the infeed table, outfeed table and cutterblock as described in the operating instructions. Always feed the work from infeed to outfeed table (i.e. from right to left), not the reverse. Always plan your work in advance, particularly with respect to the method of holding and feeding the work through the machine. Unusual jobs need particular care and forethought. Do not try to cut more than 3mm deep in one pass. The wider the material, the thinner the cut should be in order to minimise the load on the motor and the risk of kick back. Specifications Axminster No. CT150 Rating Trade Maximum Cutting Width 150mm Length of Table 1180mm Number of Knives 3 Block Speed 4000 rpm Maximum Depth of Cut 2mm Motor Power 1120 watts (1.5 HP) Weight 80kg! IT IS RECOMMENDED THAT YOU WEAR EAR PROTCTION WHEN USING THIS MACHINE Assembly & Adjustment Unpacking and Cleaning Carefully unpack the machine, the stand and all loose items from the two boxes. Remove the protective coating from the machined surfaces of the planer using a soft cloth moistened with kerosene or Rocol Heavy Duty Cleaner (Axminster Order Code ROC34011). Unpainted surfaces, and in particular the table, can be protected by applying a lubricating wax such as Lubowax (Axminster Order Code LUBO500). Assembling Jointer to Stand Place the machine on top of the stand with the pulleys on the same side and secure with the three special bolts and lockwashers provided, screwing up from underneath (See Fig 1). There are alternative methods of supporting the base of the stand: 1. Using the adjustable feet provided. 2. By screwing or bolting the base to the floor using the two lugs at the bottom of the stand
6 Assembly & Adjustment (Continued) Parts Breakdown (Stand Assembly) Fitting the Drive Belt Fit the drive belt to the motor and drive pulleys as shown in (Fig 1) Belt tension is set by loosening off the four bolts which hold the motor to the motor plate (Fig 1b) and moving the motor up and down as required. Correct tension is achieved when light finger pressure produces approximately 25mm deflection of the belt at the centre of its span. Using a straight edge check the alignment of the faces of the pulleys and correct if necessary by either moving the planer on its stand or by moving either one or both of the pulleys on their shafts. Fig 1a CT150 planer Stand & motor assembly Drive belt Fig 1 Fig 1b Motor plate bolts Fitting the Belt Guard Fit the belt and pulley guard to the stand as shown in Fig 2, using the four screws and washers provided. Fig 2 Belt guard Fig 2b Screws & washers 06 19
7 Parts List (Cutter Block Assembly) Fitting the Cutter Guard Slide the extruded aluminium cutter guard onto its support arm, ensuring that the hexagon nut fits into the slot in the extrusion. The guard assembly is bolted to the side of the planer body with two 5/16 hexagon cap screws and washers. Fig 3 Assembly & Adjustment (Continued) Fig 3a Support arm Aluminium cutter guard Fig 3b 5/16 Hexagon cap screws Support arm clamp knob Fitting and Adjusting the Fence Remove the two nuts and the washer from the fence securing bolt (Fig 4 ), place the fence in position on the extension at the rear of table and replace the nuts and washer. Adjust the position of the nuts until an adequate amount of locking force (but not too much) is applied when the locking handle (See Fig 5) is pulled right up. When this adjustment has been completed the two nuts should be locked securely together, one against the other. There are two adjustable stops ( A ) in (Fig 5) to allow the fence to be set to exactly 90 deg. and 45 deg. to the table. These stops should be adjusted using an adjustable square between the fence and the table and then locked firmly in position. For angles other than 90 or 45 deg. the fence tilt can be set by eye using the scale and pointer ( B ) in (Fig 5) or, more accurately, with an adjustable square set to the required angle. (a) (b) Fig 4 Fence assembly Adjustable stops 90 & 45 Fig 5 Scale and pointer Securing bolt 18 Locking handle 07
8 Assembly & Adjustment (Continued) Parts Breakdown (Cutter Block Assembly) Fitting the Rear Cutter Guard This is fixed into position on the fence support casting with two screws and washers, adjusting its position so that it just clears the bottom of the fence. Fig 6 Rear cutter guard Adjusting the Tables and Cutterblock Fit the two table adjustment handwheels to their respective spindles and secure by tightening up the grubscrews (See Fig 7 B). For the majority of jointing and planing operations the outfeed table (the left hand one when facing the machine) is set to be level with the knives at the highest point in their revolution. As shown in Fig 8, this is achieved by placing a straight edge on the outfeed table and adjusting the height of the outfeed table until the blades just touch the straight edge when the block is rotated by hand. This checking operation should be carried out at both ends of each of the three knives; if the height or the level of any of the knives needs adjusting this can be done by slackening off the blade clamp locking screws, repositioning the knife so that it touches the straight edge and then re-tightening the screws. (A) Fig 7 Table scale Handwheels (B) Grubscrew Fig 8 08 Cutter block knives 17
9 Parts List (Fence Assembly) Assembly & Adjustment (Continued) Adjusting the Table Gibs Gibs are the strips situated between the dovetailed guide surfaces of the infeed and outfeed tables and the body of the machine which ensure smooth running of the tables with a minimum of play. They are pre-set at the factory so should not need to be adjusted until the machine has been in use for some time. If adjustment becomes necessary this can be achieved by slackening off the gib adjusting screws (Fig 9), rotating the screws with the hex key provided to get the required amount of clearance and then re-tightening the locknuts. The screws should be held in the required position with the hex key while the locknut is tightened in order to maintain the setting. Do not be tempted to leave the setting too loose, it is better if the tables are a bit stiff as this will prevent chatter and produce a better finish on the timber. Gib adjusting screws Setting the Knives Fig 9 If the knives are removed for replacement or for resharpening they must be carefully re-set in order to achieve accurate results. Firstly, assemble the setting gauge by positioning the two gauge pieces onto the shaft and locating them with the circlips provided (See Fig 10). Next, insert one of the blades into its slot with about 1.5mm protruding from the block, slip the lock bar into position and tighten the securing screws lightly. With the setting gauge in position on the cutter block rotate the block backwards and adjust the blade until it just touches the gauge along its whole length then fully tighten the screws. Repeat this procedure for each of the three blades. Dust Extraction Fig 10 The planer will produce a large quantity of waste and it is strongly recommended that you arrange for some method of extraction, both in the interests of workshop cleanliness and the health and safety of the operator. Cutter block Fig 11 8mm spanner Blade Setting gauge There are two methods of collecting dust and chippings from the jointer/planer. You can either place a suitable receptacle underneath the chute on the right hand side of the cabinet to collect the larger sized waste or fit the extraction adaptor (Fig 11) and connect it to a suitable high airflow dust extractor such as the Axminster ADE1200. The latter method is recommended as it will remove small dust particles as well as the larger chippings, giving a cleaner and healthier environment to work in. Chute Extraction adaptor 16 09
10 Machine Illustration and Parts Description Aluminium cutter guard Fig 12a Parts Breakdown (Fence Assembly) Cutter guard knob Support arm clamp knob Fence assembly Cutter block Support arm Infeed table Outfeed table Handwheels x 2 Cutter block guard assembly Fig 12 Chute NVR On/Off switch assembly Stand Floor mounting brackets On Off Fig 12b 10 15
11 Operating Instructions (Continued) Machine Illustration and Parts Description (Continued) Planing a Bevel To cut a bevel, set the fence to the required angle and pass the timber across the knives whilst keeping it firmly pressed against both the table and the fence. Several passes may be needed to produce a bevel of the required depth. Remember, several small cuts are better than one big one. Fig 13 Gib adjusting screws Direction of Grain It is recommended that the timber is fed through the machine with the grain as shown in Fig 17; if fed against the grain (Fig 18) the result could be a rough and splintered finish. Table locking screw Tilt locking handle Fence holding handle Fence Fig 17 Outfeed table Table locking knob Fence assembly clamping handle (With the grain) Fig 18 Infeed table Stand Belt guard Access panel star knob Access panel Floor mounting brackets (Against the grain) Motor 14 11
12 Machine Illustration and Parts Description (Continued) Operating Instructions Fence holding handle Cutter block guard assembly Tilt locking handle The following instructions will give a basic introduction to the use of the jointer planer. It is recommended that scrap pieces of timber are used to check the settings and to get the feel of the machine and its operation before attempting any serious work.! DON T FORGET, ALWAYS ENSURE THAT THE CUTTERS ARE FULLY PROTECTED BY THE GUARD AND KEEP YOUR HANDS AWAY FROM THE CUTTERS. Basic Jointing/Planing Operation Fig 14 Set the guide fence square with the table and set the depth of cut to the minimum required to produce a straight edge. Don t forget, a number of smaller cuts will produce a better finish than one big one. At the start of the cut the left hand should hold the work against the table and the fence whilst the right hand should pushes the work towards the cutter block. Once the cut is under way the cut surface rests firmly on the outfeed table. The left hand should maintain both downward pressure on the outfeed table and horizontal pressure towards the fence. As the right hand reaches the cutterhead it should be transferred to the work on the outfeed table. Fence assembly clamping handle If the timber is warped, bent or very rough a series of light cuts should be taken until the work is straightened. Avoid forcing the wood down against the table during the straightening process; if excessive pressure is used the wood will spring back to its original shape making it difficult to achieve a flat result. Rear cutter guard When short and/or thin pieces of wood are being planed a pressure pad or a push stick should be used in order to keep the fingers away from the cutter block. Fig 15 Fig 14a Fig Adjustable stops 90 & 45 Fence scale and pointer 13
MODEL NO.: MI OPERATING MANUAL
MODEL NO.: MI-81200 OPERATING MANUAL RULES for SAFE OPERATION Before you operate this machine, take a moment to read this manual. Learn how to use this jointer safely, and understand this machine s applications,
More informationplaner/thicknesser 200 x 120mm
instructions for planer/thicknesser 200 x 120mm model no: sm1311 Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions,
More informationSECTION 9: PARTS. Table Breakdown REF PART # DESCRIPTION REF PART # DESCRIPTION
SECTION 9: PARTS Table Breakdown 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 23 25 17 26 27 8 1 P0675001 CAP SCREW M8-1.25 X 30 15 P0675015 SUPPORT BLOCK 2 P0675002 TABLE SUPPORT BLOCK
More informationSAVE THIS MANUAL FOR FUTURE REFERENCE. WARNING: To reduce the risk of
- ($ 0$$/ PP-,( /$( WARNING: To reduce the risk of injury, the user must read and understand the operator's manual before using this product. Part SP SAVE THIS MANUAL FOR FUTURE REFERENCE Printed in Taiwan
More informationJointer. Given a properly adjusted jointer, instruction and demonstration of use, each student will be able to:
Jointer I. Competencies Given a properly adjusted jointer, instruction and demonstration of use, each student will be able to: A. Identify the major parts of the jointer. B. Complete a written test on
More informationH Fixed Drill Press. Axminster. Devon. EX13 5HU. UK (International Dialling )
H20002 Fixed Drill Press Axminster. Devon. EX13 5HU. UK. 01297 33656 (International Dialling +44 1297 33656) www.axminster.co.uk Index of Contents Notes Page No. What s in the Box/Specification...3 Partial
More informationINSTRUCTION MANUAL 6 & 8 JOINTERS WITH SPIRAL CUTTERHEAD. MODEL: KC-75FX (6 Jointer) MODEL: KC-85FX (8 Jointer)
6 & 8 JOINTERS WITH SPIRAL CUTTERHEAD MODEL: KC-75FX (6 Jointer) MODEL: KC-85FX (8 Jointer) INSTRUCTION MANUAL COPYRIGHT 2007 ALL RIGHTS RESERVED BY KING CANADA TOOLS INC. WARRANTY INFORMATION 2-YEAR LIMITED
More informationInventory (Figure 2)
MODEL T10127 12" SPIRAL CUTTERHEAD INSTRUCTIONS The Model T10127 indexable insert spiral cutterhead is designed to replace the straightknife cutterhead from the Grizzly jointer Model G0609. The total procedure
More informationGuild of Oregon Woodworkers Shop Safety Test
Guild of Oregon Woodworkers Shop Safety Test You must pass the Test with an 80% or better and self-correct it to 100% Make sure you put the answers under the correct portion of the answer sheet for the
More informationMODEL T " HELICAL CUTTERHEAD INSTALLATION INSTRUCTIONS
MODEL T27696 12" HELICAL CUTTERHEAD INSTALLATION INSTRUCTIONS For questions or help with this product contact Tech Support at (570) 546-9663 or techsupport@grizzly.com Introduction The Model T27696 indexable
More informationQuick Set Dovetail Jig
Quick Set Dovetail Jig FOR HELP OR ADVISE ON THIS PRODUCT PLEASE CALL OUR CUSTOMER SERVICE HELP LINE : 01509 500359 THE MANUFACTURER RESERVES THE RIGHT TO ALTER THE DESIGN OR SPECIFICATION TO THIS PRODUCT
More informationDust Collector. Model No: DC2200 (FM300S)
Dust Collector Model No: DC2200 (FM300S) GENERAL SAFETY INSTRUCTIONS Before attempting to operate this machine, it is important that you read, understand and follow these instructions very carefully. They
More informationMODEL H " BYRD SHELIX CUTTERHEAD INSTRUCTIONS
MODEL H9291 12" BYRD SHELIX CUTTERHEAD INSTRUCTIONS The Model H9291 12" Byrd Shelix cutterhead is designed to replace the straight-knife cutterhead on the Grizzly jointer Model G0609. The total procedure
More informationX0 Digital Readout Micro Drill. Code
X0 Digital Readout Micro Drill Code 505097 Index of Contents Page No Index of Contents 02 Declaration of Conformity 03 What s in the Box 04 General Instructions for 230v Machines 05,06 Specific Safety
More informationSECTION 9: PARTS Fence & Cutterhead
(G0855 Only) (G0856 Only) SECTION 9: PARTS Fence & Cutterhead 1 2 3 4 65 6 5 23 111 111 7 27 130 131 132 133 136 134 135 117 12 40 8 9 13 10 9 14 15 8 11 18 25 29 63 19 20 21 17 22 28 26 26 24 40-3 40-2
More informationOPERATORS MANUAL. JOINTER by INVICTA. Model DI-42. (877) East (800) West
OPERATORS MANUAL JOINTER by INVICTA Model DI-42 INVICTA USA (877) 308-6423 - East (800) 499-4682 - West English Version Model DI-42 General Instructions As with all equipment, safety is to be a priority.
More information25-200H. 12 Planer / Jointer. with Helical Cutterhead. Parts List.
25-200H 12 Planer / Jointer with Helical Cutterhead 4001824 Parts List www.rikontools.com CABINET ASSEMBLY PARTS EXPLOSION & PARTS LIST KEY NO. DESCRIPTION KEY NO. DESCRIPTION 1 Pan Head Screw M6x12 P25-200H-1
More informationUser Manual. CMT650 Kitchen Worktop Jig CMT Part no:
User Manual CMT650 Kitchen Worktop Jig www.cmtuk.com Part no:200650 www.axminster.co.uk CMT650 Index of Contents... Page No. Index of Contents...02 What s in the Box.........03 What else you will need...
More informationFinger Jointer. Operating and Safety Instructions FJA300
Finger Jointer FJA300 Operating and Safety Instructions www.tritontools.com Thank you for purchasing this Triton tool. These instructions contain information necessary for safe and effective operation
More informationMODEL T " SPIRAL CUTTERHEAD INSTALLATION INSTRUCTIONS
MODEL T27449 8" SPIRAL CUTTERHEAD INSTALLATION INSTRUCTIONS The Model T27449 indexable insert spiral cutterhead is designed to replace the straightknife cutterhead on the Grizzly jointer Model G0490W/G0490XW
More informationMODEL T27697 & T " & 8" HELICAL CUTTERHEADS INSTALLATION INSTRUCTIONS
MODEL T27697 & T27699 6" & 8" HELICAL CUTTERHEADS INSTALLATION INSTRUCTIONS For questions or help with this product contact Tech Support at (570) 546-9663 or techsupport@grizzly.com These indexable insert
More informationVARIABLE SPEED WOOD LATHE. Model DB900 INSTRUCTION MANUAL
VARIABLE SPEED WOOD LATHE Model DB900 INSTRUCTION MANUAL 1007 TABLE OF CONTENTS SECTION...PAGE Technical data.. 1 General safety rules....1-3 Specific safety rules for wood lathe.....3 Electrical information.4
More informationVARIABLE SPEED WOOD LATHE
MODEL MC1100B VARIABLE SPEED WOOD LATHE INSTRUCTION MANUAL Please read and fully understand the instructions in this manual before operation. Keep this manual safe for future reference. Version: 2015.02.02
More informationCode: AW16BMST2 Bench Morticer
Code: 501252 AW16BMST2 Bench Morticer Index of Contents Page No. Index of Contents 02 Declaration of Conformity 02 What s in the Box 03-04 General Instructions for 230V Machines 05-06 Specific Safety Instructions
More information12mm (Max) 6mm (Max) 82mm (Max) 12mm (Max) 6mm (Max)
1 1 2 2 3 3 82mm (Max) 12mm (Max) 12mm (Max) 6mm (Max) 4 4 5 6 8 6mm (Max) 0.5 0mm 1 5 6 7 7 8 9 9 A = B 10 11 12 D B 1 13 14 15 0 C A D E 16 17 18 F G D B N H J G I K 19 A 20 G L 21 C K 1mm L M 1mm 22
More informationBUY PARTS ONLINE AT GRIZZLY.COM!
SECTION 9: PARTS Tables, Fence & Cutterhead 28 29 26 27 25 23 23 22 24 22 35 37 36 38 16 15 17 18 39 11 14 19 20 21 13 12 6 7 8 9 10 1 2 5 49 3 4 3 31 30 6 7 94 93 95 40 96 43 42 44 45 46 47 48 55 55-4
More informationET-110 EXTREMA MACHINERY COMPANY, INC. P.O. BOX 1450, ALBANY, LOUISIANA (877) FAX (225)
ET-0 EXTREMA MACHINERY COMPANY, INC. P.O. BOX 450, ALBANY, LOUISIANA 707 (877) 398-7362 FAX (225) 567-2966 PREFACE The XT-0 is precision built and manufactured to satisfy the highest standards. For maximum
More informationOWNER S MANUAL CT058 8 JOINTER
OWNER S MANUAL CT058 8 JOINTER Index General Safety Instructions Page 3 Specific Safety Instructions Page 4 CT058 Jointer Features Page 5 Illustrated Features Page 6 Unpacking Page 7 Assembly Assembling
More informationIntroduction to Carpentry Power Tools
Youth Explore Trades Skills Introduction to Carpentry Power Tools Description s use power tools every day, and the ability to use these tools correctly and safely is paramount. In this Activity Plan, students
More informationInventory (Figure 2)
MODEL T10130/T10126 6" & 8" SPIRAL CUTTERHEAD INSTRUCTIONS The Model T10126/T10130 indexable insert spiral cutterheads are designed to replace straightknife cutterheads from the Grizzly jointer Models
More informationAWSL Woodturning Lathe
Code 501245 AWSL Woodturning Lathe Hole assembly instructions including extension bed Axminster Tool Centre, Unit 10 Weycroft Avenue, Axminster, Devon EX13 5PH axminster.co.uk OPTIONAL EXTENSION BED Code
More informationMI MI OPERATING MANUAL
MODEL NO.: MI-76100 MI-76150 OPERATING MANUAL RULES for SAFE OPERATION MAGNUM INDUSTRIAL MI-76100 and MI 76150 DRILL PRESSES To help ensure safe operation, please take a moment to learn the how to operate
More informationSAFETY INFORMATION PACKET
WILLOWCREEK MIDDLE SCHOOL SAFETY INFORMATION PACKET GENERAL SHOP SAFETY 1 WIDE BELT SANDER 2 BAND SAW 3 MITER SAW 4 UP- CUT SAW 4 PLANER 6 TABLE SAW 7 DRILL PRESS 8 LATHE 8 DISK / VERTICAL BELT SANDER
More informationCut-Off Machine Model CC 14SE
Cut-Off Machine Model CC 14SE Handling instructions NOTE: Before using this Electric Power Tool, carefully read through these HANDLING INSTRUCTIONS to ensure efficient, safe operation. It is recommended
More informationSERVICE MANUAL FOR HOMELOCK M1034D 2034D 1134DW 1134D
SERVICE MANUAL FOR HOMELOCK M1034D 2034D 1134DW 1134D 11.2000 2.2012 I HOW TO USE THIS MANUAL... 1 II HOW TO ADJUST... 2 1. Height of needle bar... 2 2. Position of the lowerlooper... 3 3. Timing of the
More informationOperating, Servicing, and Safety Manual Model " Foot Shear CAUTION: Read and Understand
Operating, Servicing, and Safety Manual Model 3000 52" Foot Shear CAUTION: Read and Understand These Operating, Servicing, and Safety Instructions, Before Using This Machine. SAFETY The purpose of the
More informationSurface planer or buzzer. Performs the tasks of dressing, squaring and straightening timber Machining short lengths of timber. Without the bridge guard. Without the appropriate training. Without PPE. Set
More informationTB & SB Series Drill Presses
TB & SB Series Drill Presses OWNERS MANUAL BENCH AND FLOOR DRILL PRESS TB-16 Series & SB-16-25-32-Series FOR YOUR OWN SAFETY AND OPTIMUM OPERATION READ INSTRUCTION MANUAL BEFORE OPERATING DRILL PRESS RETAIN
More informationPARTS. Base Cabinet & Motor PARTS. Model W1745W (For Machines Mfd. Since 9/16) V2 22V2-3 22V2-4 22V2-1 22V2-2
Model W1745W (For Machines Mfd. Since 9/16) Base Cabinet & Motor 22V2-1 22V2-2 22V2-5 22V2-9 22V2-8 22V2-7 22V2-6 22V2-3 22V2-4 22V2 23 24 26 25 46 47 48 49 44 45 15 14 16 17 50 18 13 12 11 7 20 9 8 9
More informationBELT/DISC SANDER MODEL NO: CBS1-5 OPERATION & MAINTENANCE INSTRUCTIONS PART NO: GC0414
BELT/DISC SANDER MODEL NO: CBS1-5 PART NO: 6500403 OPERATION & MAINTENANCE INSTRUCTIONS GC0414 INTRODUCTION Thank you for purchasing this CLARKE Belt and Disc Sander, which is designed for hobby, DIY and
More informationOPERATORS MANUAL. Band Saw by. Model SFI-60. (877) East (800) West
OPERATORS MANUAL Band Saw by INVICTA Model SFI-60 INVICTA USA (877) 308-6423 - East (800) 499-4682 - West English Version General Instructions Thank you for purchasing this quality machine from INVICTA.
More information10 BANDSAW OPERATING INSTRUCTIONS MODEL: W715
Machinery & Tooling at its best! 10 BANDSAW OPERATING INSTRUCTIONS MODEL: W715 Charnwood, Cedar Court, Walker Road, Bardon, Leicestershire, LE67 1TU Tel. 01530 516926 Fax. 01530 516929 email; sales@charnwood.net
More information15" PLANER MODEL G1021Z PARTS LIST
15" PLANER MODEL G1021Z PARTS LIST COPYRIGHT 2000 BY GRIZZLY INDUSTRIAL, INC. WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL,
More informationBefore use please read & understand this manual, paying particular attention to the safety instructions.
OPERATOR S MANUAL AND PARTS LIST 12 HAND PUSH ROLLER MOWER - THHMR Sales & Helpline 01793 333220 www.thehandy.co.uk Before use please read & understand this manual, paying particular attention to the safety
More informationSAFETY AND OPERATING MANUAL
SAFETY AND OPERATING MANUAL BladeRunner X2 WX572 9 10 8 11 5 7 12 6 20 1 2 4 3 14 13 15 A2 A1 17 18 B2 B1 1 2 1 2 19 B3 3 4 2 C 1 D1 D1 C 2 1 E1 D2 1 2 E2 1 2 F G1 G1 F OFF ON G2 G3 H1 H2 I1 I2 I1 I2 J
More informationSIX INCH JOINTER WITH STAND ASSEMBLY AND OPERATING INSTRUCTIONS
W619 PT-6 23.3.10 SIX INCH JOINTER WITH STAND ASSEMBLY AND OPERATING INSTRUCTIONS Specifications ITEM Motor Cutter Head Table Size Fence Overall Size Cutting Depth Rabbit Cut Depth Knife Blades Stock
More informationGENERAL OPERATIONAL PRECAUTIONS PRECAUTIONS ON USING DISC GRINDER
GENERAL OPERATIONAL PRECAUTIONS WARNING! When using electric tools, basic safety precautions should always be followed to reduce the risk of fire, electric shock and personal injury, including the following.
More informationJ-3-D PART NO DATE:
37-380 & 37-877 8 PROFESSIONAL JOINTER J-3-D PART NO. 909563 DATE: 05-12-04 Page1/ J-3-D /DEB REPLACEMENT PARTS * 1345487 CUTTERHEAD ASSY, INCL: 1 1340196 KNIFE SCREW 2 1345488 BAR 3 37-355 KNIVES (SET
More informationPower Planer 1900B/N1900B/1902
Power Planer 1900B N1900B 1902 SPECIFICATIONS Model 1900B/N1900B/1902 Planing width... 82 mm Planing depth... 1 mm Shiplapping depth... 9 mm No load speed (min -1 )...16,000 Overall length... 290 mm Net
More informationMODEL W " Jointer PARTS LIST
MODEL W1684 8" Jointer PARTS LIST Phone: 1-360-734-3482 On-Line Technical Support: tech-support@woodstockint.com COPYRIGHT SEPTEMBER, 2002 BY WOODSTOCK INTERNATIONAL, INC. WARNING: NO PORTION OF THIS MANUAL
More informationRevised 8/1/2018 Page 1
1Guild of Oregon Woodworkers Shop Safety Test You must pass the Test with an 80% or better and self-correct it to 100%. Make sure you put the answers under the correct portion of the answer sheet for the
More informationAgricultural Mechanics and Technology Power Tool Safety Rules
Agricultural Mechanics and Technology Power Tool Safety Rules Name: BAND SAW Use: Cutting curves, circles and irregular shapes. 1. Use clean SHARP blades. 2. The teeth should always point DOWN. 3. Adjust
More informationGENERAL OPERATIONAL PRECAUTIONS
GENERAL OPERATIONAL PRECAUTIONS WARNING! When using electric tools, basic safety precautions should always be followed to reduce the risk of fire, electric shock and personal injury, including the following.
More informationGEARED HEAD DRILL / MILL MACHINE INSTRUCTION MANUAL
www.industrialtool.com.au GEARED HEAD DRILL / MILL MACHINE INSTRUCTION MANUAL READ CAREFULLY AND UNDERSTAND THESE INSTRUCTIONS BEFORE USE. LIMITED WARRANTY Industrial Tool & Machinery Sales (hereinafter
More informationATBG280/6 Bench Grinder Bench Grinder ATBG280/6 230V-50Hz 280 Watt 150mm x 25mm Wheel size
Bench Grinder ATBG280/6 230V-50Hz 280 Watt 150mm x 25mm Wheel size SPECIFICATIONS Model Number : ATBG280/6 Nominal Voltage Power Consumption No load speed Wheel size Weight 230Volt 50Hz 280 Watts 2880
More informationBELT & DISC SANDER MODEL No. CS6-9C Part No OPERATING & MAINTENANCE INSTRUCTIONS
BELT & DISC SANDER MODEL No. CS6-9C Part No. 6500420 OPERATING & MAINTENANCE INSTRUCTIONS 1000 PARTS DIAGRAM - 2 - - 15 - PARTS LIST No. Description Part No. No. Description Part No. 1 Rubber pad HTCS6901
More informationSabre Series 2 Inspired Design Precision Engineering
Sabre Series 2 Inspired Design Precision Engineering USER INSTRUCTIONS Thank you for choosing the Keencut Sabre Series 2. Every effort has been made to bring you a precision engineered product with the
More informationInstructions for Stone Cutting Machine
Technical data Kg. Instructions for Stone Cutting Machine SCM600 3HP 2800rpm IP55 SCM800 3HP 2800rpm IP55 SCM1000 2800rpm IP55 SCM1200 2800rpm IP55 L=600 B=85(165) L=800 B=85(175) 500x510 0 or 45 600lt/h
More informationThank you for considering "cutting edge technology."
Thank you for considering "cutting edge technology." Most woodworkers know that a shear cut is far better than a straight cut. They also know that a staggered cut is much better than just a single straight
More informationHorizontal and Vertical. Metal Cutting Band Saw MODEL: BS-115
Horizontal and Vertical Metal Cutting Band Saw MODEL: BS-5 SAFETY. Know your band saw. Read the operator s Manual carefully. Learn the operations, applications and limitation.. Use recommended accessories.
More informationSECTION 9: PARTS Table
SECTION 9: PARTS Table 26 27 25 24 23 28 33 31 22 30 21 29 34 32 20 35 19 36 18 15 16 17 37 35 36 39 30 13 8 14 11 12 38 10 40 34 29 9 54 53 56 52 41 51 42 50 43 49 17 3 46 48 44 2 7 4 6 5 46 45 47 4 1
More informationSPIDA SAW OPERATIONS MANUAL
SPIDA SAW OPERATIONS MANUAL CM SERIAL NUMBER. OCTOBER 2000 CONTENTS Page description 1.) Contents 2.) Safety First 3.) CM Overview 4.) CM Specifications 5.) CM Installation 6.) CM Operation Setting the
More informationINSTRUCTION BOOK AND PARTS LIST
Rag Cutter MODEL WE WARNING This machine is equipped with a very sharp knife. Keep hands, arms, and hair away from the knife area at all times. Misuse of this machine or failure to follow all safety instructions
More informationMB9020 Bench Top Planer Thicknesser
MB9020 Bench Top Planer Thicknesser 210661 User Manual W Axminster Reference No: MB9020 www.axminster.co.uk AXMINSTER Index of Contents... Page No. Index of Contents...1 Declaration of Conformity......
More informationOPERATOR'S MANUAL RULES FOR SAFE OPERATION
OPERATOR'S MANUAL #4950300 ROUTER AND JIG SAW MOUNTING KIT (FOR USE WITH THE BT3000 TABLE SAW) CONGRATULATIONS AND THANK YOU FOR BUYING THIS RYOBI ROUTER AND JIG SAW MOUNTING KIT. Your new #4950300 Router
More informationJigsaw Kit. Operating and Safety Instructions AJA300
Jigsaw Kit AJA300 Operating and Safety Instructions www.tritontools.com Thank you for purchasing this Triton tool. These instructions contain information necessary for safe and effective operation of this
More information8" Bench Grinder. User Manual AW8G2 WAXMINSTER. Part no:
8" Bench Grinder User Manual AW8G2 2005 Part no: 200214 www.axminster.co.uk W H I T E Index of Contents... Page No. Index of Contents...02 Declaration of Conformity.........03 What s in the Box...04 General
More informationMODEL: sm900.v2. FUSE RATING b) Connect the BROWN live wire to the live terminal L.
Instructions for: 10-speed FLAT bed wood lathe MODEL: sm900.v2 Thank you for purchasing a Sealey product. Manufactured to a high standard this product will, if used according to these instructions and
More informationGeneral Wood Shop Notes
General Wood Shop Notes Restricted Materials No METAL or BONE of any kind on any machine or in the room o See additional restrictions individual machine All reclaimed and other than new lumber must be
More informationNote: Parts without part numbers are for reference only and cannot be purchased individually.
Parts Ordering Replacement Parts To order parts or reach our service department, call 1-800-274-6848 between 7:30am and 5:30pm (CST), Monday through Friday. Having the Model Number and Serial Number of
More informationG5959Z 12" Left-Tilting Table Saw -37-
Date Serial Number GROUND. 329 401 403 411 ALWAYS USE GUARDS AND ANTI-KICKBACK DEVICES 401 107 106 152 406 404 405 408 138 412 410 409 402 151 101A 139 144 143 140 142 141 114 101B 137 108 102 103 128A
More information10 x 6 Planer/Thicknesser
01550 10 x 6 Planer/Thicknesser Please read and fully understand the instructions in this manual before operation. Keep this manual safe for future reference. 1 Specifications 2 Safety Rules.3-4 Unpacking.5
More information24" x 24" OSCILLATING SPINDLE MANUAL
24" x 24" OSCILLATING SPINDLE MANUAL LAGUNA TOOLS 2072 Alton Parkway Irvine, California 92606 Ph: 800.234.1976 www.lagunatools.com 2018, Laguna Tools, Inc. LAGUNA and the LAGUNA Logo are the registered
More informationYellow & Green may require a fuse smaller than 13 amps for certain products (subject to below).
INSTRUCTIONS FOR: Pillar drills MODEL No's: GDM120B, GDM160F Thank you for purchasing a Sealey product. Manufactured to a high standard this product will, if used according to these instructions and properly
More informationForename: Surname: School / College/ Institution. Course date: / / RDTHSC:
Specialist Extension Level S8HS Forename: Surname: School / College/ Institution Course date: / / RDTHSC: These Training and Accreditation Guidelines are based on the following essential publications:
More informationSECTION 9: PARTS. G9860/G9860ZX Cabinet Breakdown & Parts List
MIN SECTION 9: PARTS G9860/G9860ZX Cabinet Breakdown & Parts List 9 33 34 5 11 237V4 236V2 10 23 32 17 12 13 16 POWER STOP 5000 15 14 17 31 27 35 30 17 26 3 1 33 34 1 P9860001 BASE 17 PS68M PHLP HD SCR
More informationHome Workshop System WARNING. MARK V Model 500. Summary Manual. Designed and Built in Dayton, Ohio.
Shopsmith Mark V Home Workshop System MARK V Model 500 Summary Manual Designed and Built in Dayton, Ohio. WARNING Read the SAFETY information in the Introduction section and complete the ASSEMBLY AND ALIGNMENT
More informationInventory (Figure 2)
MODEL T24631 8" SPIRAL CUTTERHEAD Installation INSTRUCTIONS For questions or help with this product contact Tech Support at (570) 546-9663 or techsupport@grizzly.com Introduction The Model T24631 spiral
More informationSECTION 9: PARTS. G7947 Stand & Table Breakdown 4V2
SECTION 9: PARTS G7947 Stand & Table Breakdown 19 15 21 18 16 17 112 5 113 3 14 8 7 6 6-1 13 4V2 12 116 11 9 10 2 114 115 1 We do our best to stock replacement parts when possible, but we cannot guarantee
More informationManual BELT and DISC SANDER SCANTOOL 60
Industrivej 3-9 DK-9460 Brovst Tlf.: +45 98 23 60 88 Fax: +45 98 23 61 44 Manual BELT and DISC SANDER SCANTOOL 60 EC Declaration of Conformity SCANTOOL A/S Industrivej 3-9 9460 Brovst Denmark Website:
More informationAxminster AW16BMST Bench Morticer
Axminster AW16BMST Bench Morticer 600531 User Manual 2006 Axminster Reference No: AW16BMST www.axminster.co.uk W H I T E W H I T E Index of Contents... Page No. Index of Contents...02 Declaration of Conformity.........03
More informationMODEL T " HELICAL CUTTERHEAD INSTALLATION INSTRUCTIONS
MODEL T27698 6" HELICAL CUTTERHEAD INSTALLATION INSTRUCTIONS For questions or help with this product contact Tech Support at (570) 546-9663 or techsupport@grizzly.com The Model T27698 indexable insert
More informationTable Saw Small Parts Sled Instructions
Table Saw Small Parts Sled Instructions Effective May 2018 Review full manual instructions prior to use for important safety information. Always check Rockler.com to confirm that you are using the most
More information8 x 5 PLANER THICKNESSER OPERATING INSTRUCTIONS MODEL: W588
8 x 5 PLANER THICKNESSER OPERATING INSTRUCTIONS MODEL: W588 Charnwood, Cedar Court, Walker Road, Bardon, Leicestershire, LE67 1TU Tel. 01530 516 926 Fax. 01530 516 929 Email; sales@charnwood.net website;
More informationModel Jointer Owner s Manual
Model 0006 6 Jointer Owner s Manual Oliver Machinery M-0006HS 08/2015 Seattle, WA Copyright 2003-2015 info@olivermachinery.net www.olivermachinery.net Table of contents SAFETY INSTRUCTIONS... 2 Receiving
More informationDS12DL & DS12DLMB 300mm Disc Sanders
Code 501210 Code 505092 DS12DL & DS12DLMB 300mm Disc Sanders Axminster Tool Centre, Unit 10 Weycroft Avenue, Axminster, Devon EX13 5PH axminster.co.uk Index of contents Index of Contents 02 Declaration
More informationABM International, Inc.
ABM International, Inc. Lightning Stitch required 1 1.0: Parts List head and motor assembly (Qty. 1) Reel stand (Qty. 1) Needle bar frame clamp (Qty. 1) Motor drive (Qty. 1) 2 Cable harness with bracket
More informationSan Diego Fine Woodworkers Association Member Shop Safety Test
You must pass the Test with an 80% or better and self-correct it to 100%. Make sure you put the answers under the correct portion of the answer sheet for the test you are taking. Use the Guild Safety Answer
More information-3 2:1(5 60$18$/ -2,17(53/$1(5 $VVHPEO\ 2SHUDWLRQ 5HSDLU3DUWV &$//5,'*,' ZZZULGJLGZRRGZRUNLQJFRP )RU<RXU6DIHW\ 48(67,21625&200(176"
-3 2:1(5 60$18$/ -2,17(53/$1(5 $VVHPEO\ 2SHUDWLRQ 5HSDLU3DUWV )RU
More information-3 2:1(5 60$18$/ -2,17(53/$1(5 )RU<RXU6DIHW\ 5HDGDOOLQVWUXFWLRQVFDUHIXOO\ 6DYHWKLVPDQXDOIRUIXWXUHUHIHUHQFH
-3 2:1(5 60$18$/ -2,17(53/$1(5 )RU
More informationJointer Owner s Manual
4230 8 Jointer Owner s Manual Oliver Machinery M-4230 10/2007 Seattle, WA info@olivermachinery.net Copyright 2003 www.olivermachinery.net Warranty Thank you for your purchase of a genuine Oliver woodworking
More informationAWEPT mm Planer Thicknesser
Code 501250 AWEPT106 260mm Planer Thicknesser Axminster Tool Centre, Unit 10 Weycroft Avenue, Axminster, Devon EX13 5PH axminster.co.uk Index of Contents Page No Index of Contents 02 Declaration of Conformity
More informationTP1300 OWNER S MANUAL
TP00 OWNER S MANUAL INCH THICKNESS PLANER For Your Safety: Read all instructions carefully Save this manual for future reference SP PrintedinTaiwan Parts List for " Thickness Planer Model. TP00 Figure
More informationOPERATING INSTRUCTIONS AND PARTS LISTS
3889560 REEL ALIGNMENT GAGE OPERATING INSTRUCTIONS AND PARTS LISTS WARNING You must thoroughly read and understand this manual before operating the equipment, paying particular attention to the Warning
More informationSAVE THIS MANUAL FOR FUTURE REFERENCE. WARNING: To reduce the risk of. Part No. SP6442
-3 23(5$725 60$18$/ PP-2,17(5 3/$1(5 WARNING: To reduce the risk of injury, the user must read and understand the operator s manual before using this product. Part No. SP6442 SAVE THIS MANUAL FOR FUTURE
More informationSECTION 9: PARTS Main Breakdown
SECTION 9: PARTS Main Breakdown 2 115 75 113 112 8 9 7 8 11 4 5 3 3 85 81 79 78 90 84 68 69 69 68 87 86 86 91 95 98-2 98-1 98-3 98-4 98 98-8 98-9 98-5 98-6 99 97 98-7 100 92 114 108 107 110 109 111 104
More information7th/8th Grade Industrial Tech General Safety. Give your undivided attention to the machine in which you are using.
7th/8th Grade Industrial Tech General Safety Wood Lab Safety General Safety Always wear safety glasses. Report all injuries to the instructor. No baggy clothing or open toed shoes. Give your undivided
More informationWARNING! Read and understand the entire instruction manual before attempting set-up or operation of this machine!
! WARNING! Read and understand the entire instruction manual before attempting set-up or operation of this machine! 1. This machine is designed and intended for use by properly trained and experienced
More informationSubject to change. USERS MANUAL Art.nr. PRM6006 PBF-1050N
UK Subject to change UK USERS MANUAL Art.nr. PRM6006 PBF-1050N 0406-14 EXPLODED VIEW Fig. D Fig. A Fig. E Fig. B Fig. F Fig. C Fig. G 2 Powercraft Powercraft 11 SPARE PARTS LIST PBF-1050N REF NR DESCRIPTION
More informationSAFETY AND OPERATING MANUAL
SAFETY AND OPERATING MANUAL 8 TABLE SAW SF08N5 Congratulations on your purchase of a power tool from Screwfix Direct Ltd. We want you to continue getting the best performance from it so this handbook includes
More information