Synapse Version 6/21/17

Transcription

1 Synapse Version 6/21/17

2 Synapse

3 Synapse Table of Contents Table of Contents Page Laminates 4 Pulls 5 Product Details 6-15 Worksurfaces Center Beams Support Legs Worksurface Connecting Brackets 27 Spanning Rods Wire Management Baskets 35 Storage Cabinets Storage Cubbies Personal Storage Towers 48 Accessories 49 Cushions 50 Fabric 51 Terms and Conditions 52 Warranty 53 3

4 Laminates Standard Thermofuse Laminate Finishes (TFL) Synapse Black Matching Matte HPL: Arborite AAS405CAP Dove Grey Matching Matte HPL: Wilsonart D92-60 Mahogany Matching Matte HPL: Wilsonart 7122T-60 Tenino Grey Matching Matte HPL: Limited availability; call customer service Black Forest Walnut Matching Matte HPL: Pionite WX421 Witchcraft *Not an exact match Gunmetal Grey Matching Matte HPL: Nevamar S6-20-T Oil Cherry Matching Matte HPL: Pionite WC421-S Tuscan Walnut Matching Matte HPL: Arborite AAW-444-FPP Café Latte* Matching Matte HPL: Not Available Hardrock Maple Matching Matte HPL: Formica Regal White Matching Matte HPL: Arborite 550 Elegant White Yorkshire Cherry Matching Matte HPL: Pionite WC411-N Cognac Iconic Maple Spice Walnut Matching Matte HPL: Pionite HP336N Sunset Matching Matte HPL: Nevamar WM0047-T *Not an exact match Matching Matte HPL: Pionite WW561-N Premium Textured Thermofuse Laminate Finishes (TFL) Intrigue* Matching Matte HPL: Limited availability; call customer service Iron Hemlock Loft Natural Ash* Matching Matte HPL: Pionite W163-OZ Matching Matte HPL: Limited availability; call customer service Matching Matte HPL: Formica 8843-WR Nightfall Rustic Oak* Silverwood* Matching Matte HPL: Supermatte Texture Pionite W292-OZ Matching Matte HPL: Not Available Premium textured TFLs require a 10% upcharge. Add item code OP-TTFL-1. Matching Matte HPL: Limited availability; call customer service Matching 2MM PVC edgebanding is available for all Standard and Premium TFL finishes shown here. *Not available in one piece tops over 96" long. High-Pressure Laminate Finishes (HPL) Pricing shown in this price list applies only to non-premium HPL s as follows: Wilsonart: Solids, Woodgrains, and Abstracts in Matte (-60) finish, Formica: Color Portfolio, Woodgrains, and Patterns in Matte (-58) finish Pionite: Solids, Woodgrains, and Abstracts in Suede (N) finish Call customer service for pricing for all other HPLs from the above companies, or for pricing for HPL from Arborite and Nevamar. Additional lead times required for HPL orders depending on material availability and order complexity. Due to engineering, HPL is not available with thin PVC or 3MM PVC. 4

5 Synapse Pulls and Knobs Pulls are included on all drawers and cabinet doors for no upcharge. Premium pulls are available for an upcharge of $20 per pull. To add pulls or order extra, each pull is $30. Standard Pulls Available on All Lines for No Upcharge 101BL 101SN 105SN 108SN 115SN 125SN 201BL 201SN Premium Pulls Available for an Additional $20 per Pull 152SN 154SN 158SN 302SN 304SN 5

6 Product Details Components and Features Synapse Worksurfaces - Synapse worksurfaces are 1-1/8" thick with 45 pound industrial grade particle board core and are available in rectangular and 120 degree shapes. - Overall depths are 48" and 60" with lengths ranging from 42" to 84". - Multiple finish options in Thermofused Laminate (TFL) and High Pressure Laminate (HPL) with DeskMakers standard 2MM PVC edgebanding. - End of Run worksurfaces can be placed on either end. Available in 18" depths. - Center Beam allows optional privacy panels, tackboards, storage, etc. to be mounted directly. Support Legs - Support legs include Open Frame, A-Frame, C-Frame and Laminate end panels. - Recessed middle of run legs allow for uniterrupted seating along the length on both sides of the bench. - The middle of run wire management base conceals floor monuments and features hinged doors on both sides of the base for easy wiring access. Privacy Panels - Synapse offers a variety of privacy panels to define space, create division between users and establish varied degrees of privacy. See the Privacy Panel and Tackboard book for options and pricing. - Tackboards can be added to laminate privacy panels or the Center Spine. - Glass add-on panels can be fixed to the top of the Center Spine to create height and a greater sense of enclosure. Storage - Options include end of run mounted cubbies, overhead storage, low storage and mobile pedestals. - Center placed overhead storage units provide additional storage and create a visual barrier. - Floor storage credenzas are available in two heights, 20" and 23" high; and in two depths, 19" and 24" deep. - Floor storage credenzas provide additional storage and space division, as well as provide seating for impromptu meetings. Power - 1-1/4" wide gap between the worksurface and center beam allows wires and plugs to pass through. - Power can be easily accessed below the worksurface. - S1 System Daisy-Chain Power Connection Boxes easily mount to the underside of the center beam for easy access for each user. Power Connection Boxes are daisy chaining. - Wire baskets provide wire management and cable routing. - See the Electrical book for options and pricing. 6

7 Synapse Understanding Synapse Double Sided Benches Product Details Center Beam Spanning Rod Center Privacy Panel Mid Worksurface Lateral Privacy Partition End Worksurface Lateral Worksurface Connecting Bracket Wire Management Basket Middle of Run Wire Management Support Leg Worksurface Connecting Flat Bracket Middle of Run Support Leg End of Run Support Leg 7

8 Product Details Understanding Synapse 120 Configuration Benches Synapse Lateral Worksurface Connecting Bracket Spanning Rod Center Beam Wire Management Basket Center Privacy Panel Mid Worksurface 120 Center Support Leg Middle of Run Wire Management Support Leg Worksurface Connecting Flat Bracket Middle of Run Support Leg 120 Worksurface End of Run Support Leg 8

9 Synapse Synapse Bench Grain Direction Product Details Grain Direction for Double Sided Benches and End of Run Worksurfaces Grain Direction for 120 Configuration Benches Grain Direction for Privacy Panels 9

10 Product Details Storage Credenza Configurations Synapse 16" Wide 32"/36" Wide 48"/54" Wide 64"/72" Wide Drawer Storage 16 32/36 32/36 32/36 Hinged Door Storage 16 32/36 32/36 16/18 32/36 32/36 Open Storage 16 32/36 32/36 16/18 32/36 32/36 Combination Storage - Box Lateral and Hinged Door 16/18 16/18 32/36 16/18 32/36 32/36 Combination Storage - Box Lateral and Open Storage 16/18 16/18 32/36 16/18 32/36 32/36 Combination Storage - Hinged Door and Open Storage 16/18 16/18 32/36 16/18 32/36 32/36 - All cabinets with left and right models are shown as left models. - 32" wide combination credenzas consist of (2) 16" wide cabinets. - 36" wide combination credenzas consist of (2) 18" wide cabinets. - 48" wide combination credenzas consist of (1) 32" wide cabinet and (1) 16" wide cabinet. - 54" wide combination credenzas consist of (1) 36" wide cabinet and (1) 18" wide cabinet. - 64" wide credenzas consist of (2) 32" wide cabinets. - 72" wide credenzas consist of (2) 36" wide cabinets. 10

11 Synapse Credenza Finishes Product Details 20" High Pedestals and Credenzas have 4 possible areas that can be specified as desired: Top Finish Case Exterior Drawer/Door Front Pull Style 23" High Pedestals and Credenzas have 5 possible areas that can be specified as desired: Top Finish Case Exterior Drawer/Door Front Plinth Finish Pull Style Personal Storage Tower Configurations 18 24/30 42/54 Shelf Storage Model File Storage Model 42/54 - Personal storage tower is available in left and right models. Right models are shown. - Shelf storage model Includes wardrobe with coat hook, fixed shelf, and two adjustable shelves. - File storage model Includes wardrobe with coat hook, fixed shelf, adjustable shelf and one file drawer. - 24" deep personal storage towers consist of a 24" deep chasis and an 18" deep slide-out. Total depth is 42". - 30" deep personal storage towers consist of a 30" deep chasis and a 24" deep slide-out. Total depth is 54". 11

12 Product Details Understanding Synapse Electric Synapse Surface mounted power units provide power access above the worksurface and conceal cables by plugging into the Power block below the surface. Interconnecting cables connect power blocks to each other. Power enters the bench through the hardwire electrial starter cable. Starter cable is 8 wire, 4 circuit and rated for 20 amp. Double sided power blocks attach to the underside of the Center Beam. Power blocks have 4 outlet positions on both the front and back face. Outlets are interchangable permitting any required circuit combination. 12

13 Synapse S1 System 8 Wire, 4 Circuit Wiring Schematic Product Details Number of Units per Starter Cable Starter Cable Type Double Sided Power Block Single Circuit Plug 2 Units 8 Units Four Circuit Hardwire Calculating Interconnecting Cable Length Center of Power Block to Center of Power Block Center to Center Dimension minus 6" = Length Using S1 System 3 Way Connectors Interconnecting cables connect to the male ends of 3 way connector Power bases or pass-thru cables connect to the female end of 3 way connector 13

14 Product Details S1 System Double Sided Power Block AC-ELS1-08 See Electrical book page 36 for pricing 1.93" Synapse 8.6" 2.48" Specifications - (8) power outlets total, (4) on each side - Outlets are removable and interchangable - Mounting bracket included - Available as: - Outlets with Circuits 1, 2, 3 & 4 - Outlets all Circuit 1 - Title 24 with Circuits 2 & 4 controlled ASHRAE 90.1/Title 24 Energy Efficiency Standards - 50% of hardwired receptacles are required to be controlled to automatically shut off, conserving energy when not in use. - Controlled receptacles must be marked with the designated NEC standby mark. ASHRAE 90.1/Title 24 S1 System Power Blocks AC-ELS1-08DS-T24C See Electrical book page 36 for pricing (image shown with interface plates - not included) Specifications - Outlets on Circuits 2 & 4 are controlled - Outlets on Circuit 1 & 3 are not controlled - "IG" circuit 3 utility is an isolated circuit and shares neutral and ground 14

15 Synapse Above Surface Power and USB Unit AC-ELSC-01, AC-ELSC-03, AC-ELSC-04, AC-ELSC-05 See Electrical book page 32 for pricing Product Details Specifications - Multiple configurations available - Spill resistant power outlets - (2) 2.1A USB charging ports - (1) 72" long 15amp plug cord - Clamp mount - Available finishes: Black, Silver and White see length below 2.19" 2.5" 4.75" AC-ELSC-01: 7.45" AC-ELSC-03: 11.5" AC-ELSC-04: 11.5" AC-ELSC-05: 15

16 Worksurfaces Rectangular Worksurface 21" Deep Worksurfaces for 48" Wide Double Sided Benches Synapse Width Length TFL (T) HPL (H) SY-WS ? $164 $246 SY-WS ? $177 $266 SY-WS ? $191 $286 SY-WS ? $204 $306 SY-WS ? $217 $327 SY-WS ? $231 $346 SY-WS ? $282 $423 SY-WS ? $297 $445 - HPL tops are only available with DeskMakers standard 2MM PVC edgebanding. HPL self edge is not available. Rectangular Worksurface 27" Deep Worksurfaces for 60" Wide Double Sided Benches Depth Length TFL (T) HPL (H) SY-WS ? $184 $277 SY-WS ? $198 $297 SY-WS ? $211 $317 SY-WS ? $225 $337 SY-WS ? $238 $357 SY-WS ? $251 $377 SY-WS ? $318 $478 SY-WS ? $333 $500 - HPL tops are only available with DeskMakers standard 2MM PVC edgebanding. HPL self edge is not available. 16

17 Synapse 120 Degree Worksurface Worksurfaces WORKSURFACES Width Length TFL (T) HPL (H) For 48" Wide Benches SY-WS ? /4 $590 $945 SY-WS ? /4 $759 $1,214 SY-WS ? /4 $911 $1,457 For 60" Wide Benches SY-WS ? /4 $642 $1,026 SY-WS ? /4 $810 $1,296 SY-WS ? /4 $961 $1,539 - HPL tops are only available with DeskMakers standard 2MM PVC edgebanding. HPL self edge is not available. Rectangular Bench End of Run Worksurface Width Length TFL (T) HPL (H) SY-WS ? $177 $266 SY-WS ? $204 $306 - HPL tops are only available with DeskMakers standard 2MM PVC edgebanding. HPL self edge is not available. - When specifying bench end surfaces, cantilevering support leg must be used. Curved Bench End of Run Worksurface Width Length TFL (T) HPL (H) SY-WS ? $309 $464 SY-WS ? $580 $870 - HPL tops are only available with DeskMakers standard 2MM PVC edgebanding. HPL self edge is not available. - When specifying bench end surfaces, cantilevering support leg must be used. 17

18 Center Beams Center Beam For Double Sided Benches Synapse 1-1/4" 3-1/2" 1-1/4" CENTER BEAM Width Length TFL with PVC HPL with PVC HPL with Self Edge (T) Edge (H) Edge (S) SY-CTB ? 3 1/2 42 $41 $62 $82 SY-CTB ? 3 1/2 48 $44 $67 $89 SY-CTB ? 3 1/2 54 $48 $73 $97 SY-CTB ? 3 1/2 60 $52 $77 $103 SY-CTB ? 3 1/2 66 $58 $87 $115 SY-CTB ? 3 1/2 72 $63 $95 $126 SY-CTB ? 3 1/2 78 $70 $105 $140 SY-CTB ? 3 1/2 84 $75 $113 $150 - A center beam is required for all benches. - For use with laminate or glass privacy screens. May also be specified without a privacy screen. Please see the Privacy Panel and Tackboard pricebook for options. - 78" and 84" worksurfaces with center beam with center spine require two lateral worksurface connecting brackets, see page Dimensions are nominal. 18

19 Synapse Center Beam For 120 Configuration Benches Center Beams 1-1/4" 3-1/2" 1-1/4" CENTER BEAM CENTER BEAMS Width Length TFL with PVC HPL with PVC HPL with Self Edge (T) Edge (H) Edge (S) SY-CTB ? 3 1/2 40-1/4 $39 $59 $78 SY-CTB ? 3 1/2 46-1/4 $42 $64 $84 SY-CTB ? 3 1/2 52-1/4 $46 $70 $93 - A center beam is required for all benches. - For use with laminate or glass privacy screens. May also be specified without a privacy screen. Please see the Privacy Panel and Tackboard pricebook for options. - Dimensions are nominal. 19

20 Center Beams Center Beam With 12" High Center Spine For use with Overhead Cubbies Synapse 12 CENTER SPINE CENTER BEAM Width Length Height TFL with PVC Edge (T) HPL with PVC Edge (H) HPL with Self Edge (S) For Rectangular Benches SY-CTB ? 3 1/ $247 $371 $494 SY-CTB ? 3 1/ $266 $399 $531 SY-CTB ? 3 1/ $290 $439 $581 SY-CTB ? 3 1/ $309 $464 $618 SY-CTB ? 3 1/ $346 $519 $692 SY-CTB ? 3 1/ $377 $565 $754 SY-CTB ? 3 1/ $420 $630 $840 SY-CTB ? 3 1/ $451 $677 $902 For 120 Degree Benches SY-CTB ? 3 1/2 40 1/4 12 $238 $357 $476 SY-CTB ? 3 1/2 46 1/4 12 $260 $390 $520 SY-CTB ? 3 1/2 52 1/4 12 $281 $422 $562 - Center spine extends 12" above Center Beam. - Center spine is 1-1/8" thick material. - 78" and 84" worksurfaces with center beam with center spine require two lateral worksurface connecting brackets, see page Panel mounted tackboards can be affixed to center spine. 6" high glass privacy panels or overhead cubbies can be added to top of spine. Please see Privacy Panel and Tackboard price book for options. - Overhead cubbies can be added to top of spine. Please see pages for overhead cubbies. - Dimensions are nominal. 20

21 Synapse Center Beam With 18" High Center Spine For use with Overhead Cubbies Center Beams 18 CENTER SPINE CENTER BEAM CENTER BEAMS Width Length Height TFL with PVC Edge (T) HPL with PVC Edge (H) HPL with Self Edge (S) For Rectangular Benches SY-CTB ? 3 1/ $288 $433 $577 SY-CTB ? 3 1/ $310 $466 $620 SY-CTB ? 3 1/ $339 $509 $678 SY-CTB ? 3 1/ $361 $541 $721 SY-CTB ? 3 1/ $404 $606 $808 SY-CTB ? 3 1/ $440 $660 $880 SY-CTB ? 3 1/ $490 $735 $981 SY-CTB ? 3 1/ $526 $790 $1,053 For 120 Degree Benches SY-CTB ? 3 1/2 40 1/4 18 $275 $413 $550 SY-CTB ? 3 1/2 46 1/4 18 $305 $458 $610 SY-CTB ? 3 1/2 52 1/4 18 $332 $498 $664 - Center spine extends 18" above Center Beam. - Center spine is 1-1/8" thick material. - 78" and 84" worksurfaces with center beam with center spine require two lateral worksurface connecting brackets, see page Panel mounted tackboards can be affixed to center spine. 6" high glass privacy panels or overhead cubbies can be added to top of spine. Please see Privacy Panel and Tackboard price book for options. - Overhead cubbies can be added to top of spine. Please see pages for overhead cubbies. - Dimensions are nominal. 21

22 Support Legs Synapse End of Run Open Frame Support Leg for Double Sided Benches Width Height SY-OLG1-48-SLV 47 3/4 28 $386 SY-OLG1-60-SLV 59 3/4 28 $438 - Bases are constructed of 1" thick x 2-1/2" deep steel frame with a powdercoat finish. - Includes two adjustable glides. - For additional colors or chrome finish, please contact Customer Service for upcharge. Cantilevering Open Frame Support Leg for Double Sided Benches Width Height SY-OLG2-48-SLV 47 3/4 28 $510 SY-OLG2-60-SLV 59 3/4 28 $623 - Bases are constructed of 1" thick x 2-1/2" deep steel frame with a powdercoat finish. - For use only when specifying cubbies or bench end overhanging worksurfaces. - Includes two adjustable glides. - For additional colors or chrome finish, please contact Customer Service for upcharge. Middle of Run Open Frame Support Leg for Double Sided Benches Width Height For 48" Wide Benches SY-OLG3-48-SLV 21 3/4 28 $464 For 60" Wide Benches SY-OLG3-60-SLV 31 3/4 28 $489 - Bases are constructed of 1" thick x 2-1/2" deep steel frame with a powdercoat finish. - Includes two adjustable glides. - For additional colors or chrome finish, please contact Customer Service for upcharge. 22

23 Synapse End of Run A-Frame Support Leg for Double Sided Benches Support Legs Top of Leg Width Bottom of Leg Width Height SY-ALG1-48-SLV 37 7/8 47 3/4 28 $361 SY-ALG1-60-SLV 49 7/8 59 3/4 28 $376 - Bases are constructed of 1" thick x 2-1/2" deep steel frame with a powdercoat finish. - Includes two adjustable glides. - For additional colors or chrome finish, please contact Customer Service for upcharge. SUPPORT LEGS Cantilevering A-Frame Support Leg for Double Sided Benches Top of Leg Width Bottom of Leg Width Height SY-ALG2-48-SLV 37 7/8 47 3/4 28 $448 SY-ALG2-60-SLV 49 7/8 59 3/4 28 $561 - Bases are constructed of 1" thick x 2-1/2" deep steel frame with a powdercoat finish. - For use only when specifying cubbies or bench end overhanging worksurfaces. - Includes two adjustable glides. - For additional colors or chrome finish, please contact Customer Service for upcharge. Middle of Run Open Frame Support Leg for Double Sided Benches Top of Leg Width Bottom of Leg Width Height For 48" Wide Benches SY-ALG3-48-SLV 21 3/4 31 1/4 28 $464 For 60" Wide Benches SY-ALG3-60-SLV 31 3/4 41 1/4 28 $489 - Bases are constructed of 1" thick x 2-1/2" deep steel frame with a powdercoat finish. - Includes two adjustable glides. - For additional colors or chrome finish, please contact Customer Service for upcharge. 23

24 Support Legs End of Run C-Frame Support Leg for Double Sided Benches Synapse Width Height SY-CLG1-48-SLV 47 3/4 28 $309 SY-CLG1-60-SLV 59 3/4 28 $361 - Bases are constructed of 1" thick x 2-1/2" deep steel frame with a powdercoat finish. - Includes two adjustable glides. - For additional colors or chrome finish, please contact Customer Service for upcharge. Cantilevering C-Frame Support Leg for Double Sided Benches Width Height SY-CLG2-48-SLV 47 3/4 28 $433 SY-CLG2-60-SLV 59 3/4 28 $546 - Bases are constructed of 1" thick x 2-1/2" deep steel frame with a powdercoat finish. - For use only when specifying cubbies or bench end overhanging worksurfaces. - Includes two adjustable glides. - For additional colors or chrome finish, please contact Customer Service for upcharge. Middle of Run C-Frame Support Leg for Double Sided Benches Width Height For 48" Wide Benches SY-CLG3-48-SLV 21 3/4 28 $412 For 60" Wide Benches SY-CLG3-60-SLV 31 3/4 28 $438 - Bases are constructed of 1" thick x 2-1/2" deep steel frame with a powdercoat finish. - Includes two adjustable glides. - For additional colors or chrome finish, please contact Customer Service for upcharge. 24

25 Synapse End of Run Laminate Panel Support Leg for Double Sided Benches Support Legs Width Height TFL (T) HPL (H) SY-EPL1-48-? $319 $505 SY-EPL1-60-? $340 $525 SUPPORT LEGS - When using end panel supports, overall length of setup increases by 2-1/4" (1-1/8" per end panel). - Includes metal mounting bracket and two adjustable glides. - Edges are DeskMakers standard 2MM PVC edgebanding. Middle of Run Wire Management Support Leg for Double Sided Benches Width Depth For 48" Wide Benches SY-WML1-48-? 21 3/ $794 $1,289 For 60" Wide Benches Height TFL (T) SY-WML1-60-? 31 3/ $810 $1,304 - Includes hinged access doors both sides. - Includes adjustable glides. - Edges are DeskMakers standard 2MM PVC edgebanding. - For rolled stainless steel to the doors only, add SY-OPTN-BOX-STL for $494. Edges with rolled steel finish are 2MM PVC. HPL (H) 25

26 Support Legs 120 Center Support Leg for Cluster Configuration Benches Synapse Width Height For 48" Wide Benches SY-CNLG-48-SLV 27 3/4 28 $618 For 60" Wide Benches SY-CNLG-60-SLV 38 1/4 28 $721 - Bases are constructed of 1" thick x 2-1/2" deep steel frame with a powdercoat finish. - Dimensions are nominal. - Includes two adjustable glides. - For additional colors or chrome finish, please contact Customer Service for upcharge. 26

27 Synapse Worksurface Connecting Flat Bracket Supporting Brackets Width Length SUPPORT LEGS AND BRACKETS AC-BRKT-FLAT 3 1/2 6 1/2 $17 - Worksurface connecting flat brackets must be specified to connect two worksurfaces together, providing required support. - Available in black finish only. (These are the same brackets DeskMakers uses for connecting desks to returns.) - Includes required wood screws. Lateral Worksurface Connecting U-Bracket Width Length SY-BRKT-U 2 1/2 19 3/4 $55 - Lateral worksurface connecting brackets must be specified to connect two worksurfaces to the center beam, providing required support. Tops 42" to 72" long require one lateral bracket, 78" and 84" worksurfaces require two lateral brackets. - Available in silver finish only. - Includes required wood screws. 27

28 Spanning Rods Spanning Rods - For Double Sided Benches Synapse Single Run (A) Used for benches that are one section and do not have a middle of run section. Rods connect End of Run Support Legs to End of Run Support Legs. A End of Run Support Leg End of Run (B) Used for end sections of Benches. Rods Connect End of Run Support Legs to Middle of Run Support Legs. B B Middle of Run Support Leg End of Run Support Leg Middle of Run (C) Used for middle sections of Benches. Rods connect Middle of Run Support Legs to Middle of Run Support Legs. B C B Middle of Run Support Leg End of Run Support Leg Cantilevering (D) Used for end sections of Benches. Rods connect Cantilevering Support Legs to Middle of Run Support Legs. B D Middle of Run Support Leg Cantilevering Support Leg 28

29 Synapse Spanning Rod Single Run (A) Worksurface Length Spanning Rods Rod Length Worksurface Length Rod Length SY-RDSR /4 $58 SY-RDSR /4 $67 SY-RDSR /4 $76 SY-RDSR /4 $85 SY-RDSR /4 $95 SY-RDSR /4 $104 SY-RDSR /4 $113 SY-RDSR /4 $123 SPANNING RODS - Spanning rods are approximately 1" square steel with a powdercoat finish. - Single run benches with 72", 78" and 84" worksurfaces and an overhead cubby require a middle of run support leg and two lateral worksurface connecting brackets. - For laminate panel support legs use middle of run spanning rods. B Cantilevering Support Leg - If using cantilevering legs on both ends of bench, specify end of run to middle of run (SY-RDER) spanning rods. 29

30 Spanning Rods Spanning Rod End of Run (B) Synapse Worksurface Length Rod Length Worksurface Length Rod Length SY-RDER /4 $62 SY-RDER /4 $71 SY-RDER /4 $80 SY-RDER /4 $90 SY-RDER /4 $99 SY-RDER /4 $108 SY-RDER /4 $117 SY-RDER /4 $127 - Spanning rods are approximately 1" square steel with a powdercoat finish. - Laminate panel support legs use middle of run spanning rods for the end of run location. Spanning Rod Cantilevering End of Run (D) Worksurface Length Rod Length Worksurface Length Rod Length SY-RDCR /2 $63 SY-RDCR /2 $72 SY-RDCR /2 $82 SY-RDCR /2 $91 SY-RDCR /2 $100 SY-RDCR /2 $110 SY-RDCR /2 $119 SY-RDCR /2 $128 - Spanning rods are approximately 1" square steel with a powdercoat finish. 30

31 Synapse Spanning Rod Middle of Run (C) Worksurface Length Worksurface Length Spanning Rods Rod Length Rod Length Worksurface Length Rod Length SY-RDMR /4 $66 SY-RDMR /4 $75 SY-RDMR /4 $84 SY-RDMR /4 $94 SPANNING RODS SY-RDMR /4 $103 SY-RDMR /4 $112 SY-RDMR /4 $122 SY-RDMR /4 $131 - Spanning rods are approximately 1" square steel with a powdercoat finish. - Laminate panel support legs use middle of run spanning rods for the end of run location. 31

32 Spanning Rods Spanning Rods - For 120 Configuration Benches Synapse Tri-Cluster (E) Used for Tri-Cluster 120 benches that are three 120 sections. Rods connect End of Run Support Legs to 120 Center Support Leg. E E E 120 Center Support Leg End of Run Support Leg Dogbone (F) Used for connecting two Tri-Cluster bench sections together. Rods connect 120 Center Support Legs to Middle of Run Support Legs. E E F F E E 120 Center Support Leg Middle of Run Support Leg End of Run Support Leg Middle of Run (C) - See Page 29 The same Middle of Run rods for Double Sided Benches are used for 120 Configuration Benches. Rods connect Middle of Run Support Legs to Middle of Run Support Legs. E E F C F E E 120 Center Support Leg Middle of Run Support Leg End of Run Support Leg 32

33 Synapse Spanning Rod Tri-Cluster (E) Worksurface Length Spanning Rods Rod Length Worksurface Length Rod Length For 48" Wide Benches SY-RDTC $58 SY-RDTC $67 SY-RDTC $76 SPANNING RODS For 60" Wide Benches SY-RDTC $58 SY-RDTC $67 SY-RDTC $76 - Spanning rods are approximately 1" square steel with a powdercoat finish. - Laminate panel support legs use middle of run spanning rods for the end of run location. 33

34 Spanning Rods Spanning Rod Dogbone (F) Worksurface Length Synapse Rod Length For 48" Wide Benches Worksurface Length Rod Length SY-RDDB $62 SY-RDDB $71 SY-RDDB $80 For 60" Wide Benches SY-RDDB $62 SY-RDDB $71 SY-RDDB $80 - Spanning rods are approximately 1" square steel with a powdercoat finish. - Laminate panel support legs use middle of run spanning rods for the end of run location. - Dimensions are nominal. Cantilevering Support Leg F F E 120 Center Support Leg End of Run Support Leg Cantilevering Support Leg - If using cantilevering legs on 120 degree benches, specify dogbone middle of run to 120 center support leg (SY-RDDB) spanning rods. 34

35 Synapse Wire Management Baskets Wire Management Baskets Width Length Height SY-WMBT $96 SY-WMBT $101 SY-WMBT $128 SY-WMBT $141 SY-WMBT $148 - Includes mounting brackets. - Silver finish. - Overall height with mounting brackets is 5". Power WIRE MANAGEMENT BASKETS 35

36 Storage Cabinets Metal Mobile Box/File Pedestal Synapse Color Width Depth Height MF-MPE1-SM (Silver Metallic) $540 MF-MPE1-WT (White) $540 MF-MPE1-BK (Black) $540 - Ships in individual carton. - For laminate drawer faces with standard finishes and pulls, add MF-OPTN-FT for $142. For Premium pulls Include OP-PULL-25 for $22 List per pull. Metal Mobile Box/File Pedestal with Cushion Color Width Depth Height Grade 1 Grade 2 Grade 3 Grade 4 MF-MPE2-SM-GR? (Silver Metallic) $672 $725 $780 $833 MF-MPE2-WT-GR? (White) $672 $725 $780 $833 MF-MPE2-BK-GR? (Black) $672 $725 $780 $833 - Ships in individual carton. - For laminate drawer faces with standard finishes and pulls, add MF-OPTN-FT for $142. For Premium pulls Include OP-PULL-25 for $22 List per pull. - See website for fabric selections. Skinny Metal Mobile Box/File Pedestal Color Width Depth Height MF-MPSK-SM (Silver Metallic) $520 MF-MPSK-WT (White) $520 MF-MPSK-BK (Black) $520 - Ships in individual carton. - For laminate drawer faces with standard finishes and pulls, add MF-OPTN-FT for $142. For Premium pulls Include OP-PULL-25 for $22 List per pull. Skinny Metal Mobile Box/File Pedestal with Cushion Color Width Depth Height Grade 1 Grade 2 Grade 3 Grade 4 MF-MPSK-SM-GR? (Silver Metallic) $640 $689 $738 $787 MF-MPSK-WT-GR? (White) $640 $689 $738 $787 MF-MPSK-BK-GR? (Black) $640 $689 $738 $787 - Ships in individual carton. - For laminate drawer faces with standard finishes and pulls, add MF-OPTN-FT for $142. For Premium pulls Include OP-PULL-25 for $22 List per pull. - See website for fabric selections. 36

37 Synapse Mobile Box/File Pedestal Width Depth Height Storage Cabinets SS-MBBF $715 - Five locking casters for stability. - Accomodates letter-size filing front to back, or legal-size filing side to side. Mobile Box/File Pedestal with Cushion Width Depth Height Grade 1 Grade 2 Grade 3 Grade 4 SS-MBCS-1622-GR? $824 $879 $932 $987 - Five locking casters for stability. - Accomodates letter-size filing front to back, or legal-size filing side to side. - Replace '?' with fabric grade. See website for fabric selections. 20" High Statonary Box/File Pedestal Width Depth Height SY-SBFL $524 SY-SBFL $569 - Includes adjustable glides. - Accomodates letter-size filing front to back, or legal-size filing side to side. - See page 50 for option to add fabric cushion. 23" High Statonary Box/File Pedestal STORAGE CABINETS Width Depth Height SY-SBFP $653 SY-SBFP $697 - Includes 3" high recessed plinth with concealed adjustable glides. - Accomodates letter-size filing front to back, or legal-size filing side to side. - See page 50 for option to add fabric cushion. 37

38 Storage Cabinets 25" High Stationary Box/Box/File Pedestal Width Depth Height Synapse SY-SBBF $639 SY-SBBF $690 - Includes adjustable glides. - Lock standard. - Accomodates letter-size filing front to back, or legal-size filing side to side. 28" High Stationary Box/Box/File Pedestal Width Depth Height SY-SBBP $767 SY-SBBP $819 - Lock standard. - Includes 3" high recessed plinth with concealed adjustable glides. - Accomodates letter-size filing front to back, or legal-size filing side to side. 25" High Stationary File/File Pedestal Width Depth Height SY-SFFL $639 SY-SFFL $690 - Includes adjustable glides. - Lock standard. - Accomodates letter-size filing front to back, or legal-size filing side to side. 28" High Stationary File/File Pedestal Width Depth Height SY-SFFP $767 SY-SFFP $819 - Lock standard. - Includes 3" high recessed plinth with concealed adjustable glides. - Accomodates letter-size filing front to back, or legal-size filing side to side. 38

39 Synapse Storage Cabinets 20" High Box/Lateral Credenza Width Depth Height 32/36 64/72 SY-BLFL $800 SY-BLFL $874 SY-BLFL $909 SY-BLFL $994 SY-BLFL $1,409 SY-BLFL $1,507 SY-BLFL $1,602 SY-BLFL $1,736 - Includes adjustable glides. - Lock standard. - Lateral file drawer allows for two rows front to back legal or letter filing or one row of side to side legal filing. - On 24" deep credenzas, case is deeper but drawers are same depth as 19" case. - See page 50 for option to add fabric cushion. 23" High Box/Lateral Credenza Width Depth Height 32/36 64/72 SY-BLFP $929 SY-BLFP $1,003 SY-BLFP $1,038 SY-BLFP $1,123 SY-BLFP $1,538 SY-BLFP $1,656 SY-BLFP $1,730 SY-BLFP $1,864 - Includes 3" high recessed plinth with concealed adjustable glides. - Lock standard. - Lateral file drawer allows for two rows front to back legal or letter filing or one row of side to side legal filing. - On 24" deep credenzas, case is deeper but drawers are same depth as 19" case. - See page 50 for option to add fabric cushion. STORAGE CABINETS

40 Storage Cabinets 20" High Hinged Door Credenza Synapse 16 32/36 48/54 64/72 16" & 48/54" Cabinets Left Model Shown Width Depth Height Left Model Right Model SY-DRCL-1916-L SY-DRCL-1916-R $525 SY-DRCL-2416-L SY-DRCL-2416-R $559 SY-DRCL $773 SY-DRCL $847 SY-DRCL $878 SY-DRCL $962 SY-DRCL-1948-L SY-DRCL-1948-R $1,114 SY-DRCL-2448-L SY-DRCL-2448-R $1,203 SY-DRCL-1954-L SY-DRCL-1954-R $1,267 SY-DRCL-2454-L SY-DRCL-2454-R $1,367 SY-DRCL $1,353 SY-DRCL $1,471 SY-DRCL $1,538 SY-DRCL $1,672 - Includes adjustable glides. - Single shelf per bay included. For each extra shelf -- use OP-SHLF-2 for $ Lock NOT standard. For lock on doors per bay, add OP-LOCK-2 for $83. - See page 50 for option to add fabric cushion. 23" High Hinged Door Credenza 16 32/36 48/54 64/72 16" & 48/54" Cabinets Left Model Shown Width Depth Height Left Model Right Model SY-DRCP-1916-L SY-DRCP-1916-R $654 SY-DRCP-2416-L SY-DRCP-2416-R $688 SY-DRCP $901 SY-DRCP $975 SY-DRCP $1,006 SY-DRCP $1,091 SY-DRCP-1948-L SY-DRCP-1948-R $1,243 SY-DRCP-2448-L SY-DRCP-2448-R $1,332 SY-DRCP-1954-L SY-DRCP-1954-R $1,396 SY-DRCP-2454-L SY-DRCP-2454-R $1,496 SY-DRCP $1,482 SY-DRCP $1,600 SY-DRCP $1,667 SY-DRCP $1,800 - Includes 3" high recessed plinth with concealed adjustable glides. - Single shelf per bay included. For each extra shelf -- use OP-SHLF-2 for $ Lock NOT standard. For lock on doors per bay, add OP-LOCK-2 for $83. - See page 50 for option to add fabric cushion. 40

41 Synapse 20" High Open Storage Credenza Width Depth Height Storage Cabinets 16 32/36 48/54 64/72 48/54" Cabinet Left Model Shown SY-BKCL $484 SY-BKCL $525 SY-BKCL $668 SY-BKCL $725 SY-BKCL $760 SY-BKCL $824 SY-BKCL-1948-L SY-BKCL-1948-R $952 SY-BKCL-2448-L SY-BKCL-2448-R $1,024 SY-BKCL-1954-L SY-BKCL-1954-R $984 SY-BKCL-2454-L SY-BKCL-2454-R $1,058 SY-BKCL $1,128 SY-BKCL $1,205 SY-BKCL $1,281 SY-BKCL $1,370 - Includes adjustable glides. - Single shelf per bay included. For each extra shelf -- use OP-SHLF-2 for $ See page 50 for option to add fabric cushion. 23" High Open Storage Credenza 16 32/36 48/54 64/72 48/54" Cabinet Left Model Shown Width Depth Height SY-BKCP $613 SY-BKCP $654 SY-BKCP $797 SY-BKCP $854 SY-BKCP $889 SY-BKCP $953 SY-BKCP-1948-L SY-BKCP-1948-R $1,080 SY-BKCP-2448-L SY-BKCP-2448-R $1,153 SY-BKCP-1954-L SY-BKCP-1954-R $1,112 SY-BKCP-2454-L SY-BKCP-2454-R $1,187 SY-BKCP $1,257 SY-BKCP $1,334 SY-BKCP $1,438 SY-BKCP $1,499 - Includes 3" high recessed plinth with concealed adjustable glides. - Single shelf per bay included. For each extra shelf -- use OP-SHLF-2 for $ See page 50 for option to add fabric cushion. STORAGE CABINETS 41

42 Storage Cabinets 20" High Combination Credenza - Box/Lateral with Open Storage Synapse 32/36 48/54 64/72 Left Models Shown Width Depth Height Left Model Right Model SY-BLBL-1932-L SY-BLBL-1932-R $1,042 SY-BLBL-2432-L SY-BLBL-2432-R $1,125 SY-BLBL-1936-L SY-BLBL-1936-R $1,042 SY-BLBL-2436-L SY-BLBL-2436-R $1,131 SY-BLBL-1948-L SY-BLBL-1948-R $1,058 SY-BLBL-2448-L SY-BLBL-2448-R $1,146 SY-BLBL-1954-L SY-BLBL-1954-R $1,202 SY-BLBL-2454-L SY-BLBL-2454-R $1,303 SY-BLBL-1964-L SY-BLBL-1964-R $1,217 SY-BLBL-2464-L SY-BLBL-2464-R $1,311 SY-BLBL-1972-L SY-BLBL-1972-R $1,383 SY-BLBL-2472-L SY-BLBL-2472-R $1,490 - Includes adjustable glides. - Single shelf per bay included. For each extra shelf -- use OP-SHLF-2 for $ Lock standard on box lateral cabinet. - Lateral file drawer allows for two rows front to back legal or letter filing, or one row of side to side legal filing. - On 24" deep credenzas, case is deeper but drawers are same depth as 19" case. - See page 50 for option to add fabric cushion. 23" High Combination Credenza - Box/Lateral with Open Storage 32/36 48/54 64/72 Left Models Shown Width Depth Height Left Model Right Model SY-BLBP-1932-L SY-BLBP-1932-R $1,162 SY-BLBP-2432-L SY-BLBP-2432-R $1,248 SY-BLBP-1936-L SY-BLBP-1936-R $1,171 SY-BLBP-2436-L SY-BLBP-2436-R $1,260 SY-BLBP-1948-L SY-BLBP-1948-R $1,187 SY-BLBP-2448-L SY-BLBP-2448-R $1,275 SY-BLBP-1954-L SY-BLBP-1954-R $1,331 SY-BLBP-2454-L SY-BLBP-2454-R $1,432 SY-BLBP-1964-L SY-BLBP-1964-R $1,346 SY-BLBP-2464-L SY-BLBP-2464-R $1,440 SY-BLBP-1972-L SY-BLBP-1972-R $1,512 SY-BLBP-2472-L SY-BLBP-2472-R $1,619 - Includes 3" high recessed plinth with concealed adjustable glides. - Single shelf per bay included. For each extra shelf -- use OP-SHLF-2 for $ Lock standard on box lateral cabinet. - Lateral file drawer allows for two rows front to back legal or letter filing, or one row of side to side legal filing. - On 24" deep credenzas, case is deeper but drawers are same depth as 19" case. - See page 50 for option to add fabric cushion. 42

43 Synapse 20" High Combination Credenza - Hinged Door with Open Storage Storage Cabinets 32/36 48/54 64/72 Left Models Shown Width Depth Height Left Model Right Model SY-DBKL-1932-L SY-DBKL-1932-R $816 SY-DBKL-2432-L SY-DBKL-2432-R $876 SY-DBKL-1936-L SY-DBKL-1936-R $927 SY-DBKL-2436-L SY-DBKL-2436-R $995 SY-DBKL-1948-L SY-DBKL-1948-R $1,030 SY-DBKL-2448-L SY-DBKL-2448-R $1,119 SY-DBKL-1954-L SY-DBKL-1954-R $1,170 SY-DBKL-2454-L SY-DBKL-2454-R $1,271 SY-DBKL-1964-L SY-DBKL-1964-R $1,190 SY-DBKL-2464-L SY-DBKL-2464-R $1,283 SY-DBKL-1972-L SY-DBKL-1972-R $1,351 SY-DBKL-2472-L SY-DBKL-2472-R $1,458 - Includes adjustable glides. - Single shelf per bay included. For each extra shelf -- use OP-SHLF-2 for $ Lock NOT standard. For lock on doors per bay, add OP-LOCK-2 for $83. - See page 50 for option to add fabric cushion. 23" High Combination Credenza - Hinged Door with Open Storage 32/36 48/54 64/72 Left Models Shown Width Depth Height Left Model Right Model SY-DBKP-1932-L SY-DBKP-1932-R $945 SY-DBKP-2432-L SY-DBKP-2432-R $1,004 SY-DBKP-1936-L SY-DBKP-1936-R $1,056 SY-DBKP-2436-L SY-DBKP-2436-R $1,124 SY-DBKP-1948-L SY-DBKP-1948-R $1,159 SY-DBKP-2448-L SY-DBKP-2448-R $1,247 SY-DBKP-1954-L SY-DBKP-1954-R $1,299 SY-DBKP-2454-L SY-DBKP-2454-R $1,400 SY-DBKP-1964-L SY-DBKP-1964-R $1,318 SY-DBKP-2464-L SY-DBKP-2464-R $1,412 SY-DBKP-1972-L SY-DBKP-1972-R $1,480 SY-DBKP-2472-L SY-DBKP-2472-R $1,587 - Includes 3" high recessed plinth with concealed adjustable glides. - Single shelf per bay included. For each extra shelf -- use OP-SHLF-2 for $ Lock NOT standard. For lock on doors per bay, add OP-LOCK-2 for $83. - See page 50 for option to add fabric cushion. STORAGE CABINETS 43

44 Storage Cabinets 20" High Combination Credenza - Box/Lateral with Hinged Door Synapse 32/36 48/54 64/72 Left Models Shown Width Depth Height Left Model Right Model SY-BLDL-1932-L SY-BLDL-1932-R $1,112 SY-BLDL-2432-L SY-BLDL-2432-R $1,204 SY-BLDL-1936-L SY-BLDL-1936-R $1,128 SY-BLDL-2436-L SY-BLDL-2436-R $1,215 SY-BLDL-1948-L SY-BLDL-1948-R $1,143 SY-BLDL-2448-L SY-BLDL-2448-R $1,231 SY-BLDL-1954-L SY-BLDL-1954-R $1,299 SY-BLDL-2454-L SY-BLDL-2454-R $1,399 SY-BLDL-1964-L SY-BLDL-1964-R $1,381 SY-BLDL-2464-L SY-BLDL-2464-R $1,500 SY-BLDL-1972-L SY-BLDL-1972-R $1,570 SY-BLDL-2472-L SY-BLDL-2472-R $1,704 - Includes adjustable glides. - Single shelf per bay included. For each extra shelf -- use OP-SHLF-2 for $ Lock standard on box lateral cabinet. For lock on doors per bay, add OP-LOCK-2 for $83. - Lateral file drawer allows for two rows front to back legal or letter filing, or one row of side to side legal filing. - On 24" deep credenzas, case is deeper but drawers are same depth as 19" case. - See page 50 for option to add fabric cushion. 23" High Combination Credenza - Box/Lateral with Hinged Door 32/36 48/54 64/72 Left Models Shown Width Depth Height Left Model Right Model SY-BLDP-1932-L SY-BLDP-1932-R $1,242 SY-BLDP-2432-L SY-BLDP-2432-R $1,334 SY-BLDP-1936-L SY-BLDP-1936-R $1,257 SY-BLDP-2436-L SY-BLDP-2436-R $1,344 SY-BLDP-1948-L SY-BLDP-1948-R $1,272 SY-BLDP-2448-L SY-BLDP-2448-R $1,360 SY-BLDP-1954-L SY-BLDP-1954-R $1,428 SY-BLDP-2454-L SY-BLDP-2454-R $1,527 SY-BLDP-1964-L SY-BLDP-1964-R $1,510 SY-BLDP-2464-L SY-BLDP-2464-R $1,628 SY-BLDP-1972-L SY-BLDP-1972-R $1,698 SY-BLDP-2472-L SY-BLDP-2472-R $1,832 - Includes 3" high recessed plinth with concealed adjustable glides. - Single shelf per bay included. For each extra shelf -- use OP-SHLF-2 for $ Lock standard on box lateral cabinet. For lock on doors per bay, add OP-LOCK-2 for $83. - Lateral file drawer allows for two rows front to back legal or letter filing, or one row of side to side legal filing. - On 24" deep credenzas, case is deeper but drawers are same depth as 19" case. - See page 50 for option to add fabric cushion. 44

45 Synapse Storage Cubby - Cantilevering Open Cubby Width Depth Height Storage Cubbies SY-HCU $680 SY-HCU $736 - Units have 1-1/8" bottom, 3/4" sides, and 3/4" top. - Add whiteboard to outside back of unit. Use SY-OPTN-CBWB for $124. Storage Cubby - Cantilevering Cubby with Sliding Doors Width Depth Height Frosted Acrylic (A) SY-HCU ? $939 $989 SY-HCU ? $993 $1,045 - Units have 1-1/8" bottom, 3/4" sides, and 3/4" top. - Add whiteboard to outside back of unit. Use SY-OPTN-CBWB for $ Decorative acrylic and glass options available on a per-quote basis. Contact customer service. Acid-Etched Glass (G) Additional Information about Cantivelering Cubbies STORAGE CABINETS - Cantilevering cubbies may face inward or outward. - Cubby width must match the depth of bench. - Must be specified with cantilevering support legs. 45

46 Storage Cubbies Open Overhead Cubby For Mounting on Center Beam with Center Spine Synapse No Center Partition SY-SHS $456 SY-SHS $467 SY-SHS $491 SY-SHS $526 SY-SHS $559 Center Partition Width Depth Height SY-SHS $592 SY-SHS $701 SY-SHS $730 SY-SHS $759 SY-SHS $789 - Units have all 3/4" material. - Single run benches with 72", 78" and 84" worksurfaces and an overhead cubby require a middle of run support leg and two lateral worksurface connecting brackets. Overhead Cubby with Sliding Doors For Mounting on Center Beam with Center Spine Width Depth Height Frosted Acrylic (A) Acid-Etched Glass (G) SY-SHS ? $789 $828 SY-SHS ? $906 $952 SY-SHS ? $946 $994 SY-SHS ? $975 $1,026 SY-SHS ? $1,004 $1,055 SY-SHS ? $1,034 $1,085 SY-SHS ? $1,063 $1,117 - Units have all 3/4" material. - Decorative acrylic and glass options available on a per-quote basis. Contact customer service. - Single run benches with 72", 78" and 84" worksurfaces and an overhead cubby require a middle of run support leg and two lateral worksurface connecting brackets. 46

47 Synapse Storage Cubbies Shared Open Overhead Cubby For Mounting on Center Beam with Center Spine or Metal Support Legs Width Depth Height Left Opening Right Opening SY-SHS L SY-SHS R $608 SY-SHS L SY-SHS R $643 Left Opening Shown SY-SHS L SY-SHS R $730 SY-SHS L SY-SHS R $759 SY-SHS L SY-SHS R $789 SY-SHS L SY-SHS R $818 SY-SHS L SY-SHS R $847 SY-SHS L SY-SHS R $876 - Units have all 3/4" material. - Units have openings on both sides so it can be placed in center of workstations facing each other. - Add TX-OPTN-CBWB for $107 for dry erase whiteboard material on the back of one side. (Use quantity of two for both sides.) - Add TX-OPTN-CBTB-? for fabric tackboard on the back of one side, where '?' represents fabric grade. Grade 1: $230, Grade 2: $281, Grade 3: $326, Grade 4: $365. See page website for fabrics. - Single run benches with 72", 78" and 84" worksurfaces and an overhead cubby require a middle of run support leg and two lateral worksurface connecting brackets. 1-Inch Square, 3-3/8" High Support Leg For Overhead Cubby Support TX-SLEG-02 $33 - Leg is 1" square. - Used to support a cubby unit resting on a storage cabinet or worksurface. - Add TX-OPTN-AKIT for $7 for set of two special attachment screws to permanently affix leg to storage cabinet or worksurface. 1-Inch Square, 8-3/8" High Support Leg For Overhead Cubby Support STORAGE CUBBIES TX-SLEG-03 $52 - Leg is 1" square. - Used to support a cubby unit resting on a Storage Cabinet or Worksurface. - Add TX-OPTN-AKIT for $7 for set of two special attachment screws to permanently affix leg to storage cabinet or worksurface. 47

48 Storage Towers Personal Storage Tower - Shelf Storage Model Single Pull-Out Door Synapse 24" Model 30" Model Right Model Shown Powered Model Right Model Shown Powered Model Width Depth Height Left Model Right Model SY-PST L SY-PST R $2,055 SY-PST LPWR SY-PST RPWR $2,443 SY-PST L SY-PST R $2,194 SY-PST LPWR SY-PST RPWR $2,582-24" Deep model includes fixed shelf and two adjustable shelves. - 30" Deep model includes wardrobe with coat hook, fixed shelf and two adjustable shelves. - Powered model includes power unit with two outlets and two USB charging ports. Power unit has 108" long cord with plug. Power unit is field installed into factory cut hole. Includes 2.5" grommet in side for routing cord. - Includes adjustable glides. - Lock NOT standard. For lock on doors per bay, add OP-LOCK-2 for $83. Personal Storage Tower - File Storage Model Single Pull-Out Door Right Model Shown Powered Model Width Depth Height Left Model Right Model SY-PST L SY-PST R $2,634 SY-PST LPWR SY-PST RPWR $3,033 - Includes wardrobe with coat hook, fixed shelf, adjustable shelf and one file drawer. - Powered model includes power unit with two outlets and two USB charging ports. Power unit has 108" long cord with plug. Power unit is field installed into factory cut hole. Includes 2.5" grommet in side for routing cord. - Includes adjustable glides. - Lock NOT standard. For lock on doors per bay, add OP-LOCK-2 for $83. 48

49 Synapse Accessories Slide On Privacy Partition For Lateral Privacy Height Length TFL (T) Magnetic Whiteboard (W) For 21" Deep Worksurfaces SY-PRP ? $361 $546 For 27" Deep Worksurfaces SY-PRP ? $391 $577-3/4" thick material with 2MM PVC edgebanding. - Attached via brackets and wood screws below the worksurface. - HPL available. Contact customer service for pricing. - Cannot add tackboards. Single Monitor - Monitor Arm AC-MONT-ARM1 $340 - Units ship individually boxed. - Includes both desk clamp and bolt through mounting options. Must be field installed. - Suitable for displays from 12" to 24". - Polished silver finsih. Dual Monitor - Monitor Arm AC-MONT-ARM2 $561 Swivel Organizer - Units ship individually boxed. - Includes both desk clamp and bolt through mounting options. Must be field installed. - Suitable for displays from 12" to 24". - Polished silver finsih. Color Width Depth Height ACCESSORIES AC-RORG-SL Silver 13 5/8 8 1/4 1 3/8 $26 AC-RORG-CL Clear 13 5/8 8 1/4 1 3/8 $26 AC-RORG-BK Black 13 5/8 8 1/4 1 3/8 $26 - Units ship boxed with installation hardware. Must be field installed. Swivel Organizer - Small Color Width Depth Height AC-ORG2-SL Silver 9 7 1/2 1 $21 AC-ORG2-BK Black 9 7 1/2 1 $21 - Units ship boxed with installation hardware. Must be field installed. 49

50 Cushions Synapse Fabric Wrapped Cushions - 19" Deep Width Depth Height Grade 1 Grade 2 Grade 3 Grade 4 SY-FCSN-1916-GR? 15 5/8 18 1/8 2 1/2 $204 $256 $297 $343 SY-FCSN-1918-GR? 17 5/8 18 1/8 2 1/2 $211 $265 $306 $353 SY-FCSN-1924-GR? 23 5/8 18 1/8 2 1/2 $239 $288 $334 $385 SY-FCSN-1932-GR? 32 1/8 18 1/8 2 1/2 $266 $321 $371 $427 SY-FCSN-1936-GR? 36 1/8 18 1/8 2 1/2 $280 $338 $389 $449 SY-FCSN-1948-GR? 48 1/8 18 1/8 2 1/2 $374 $451 $519 $599 SY-FCSN-1954-GR? 54 1/8 18 1/8 2 1/2 $420 $507 $584 $674 SY-FCSN-1964-GR? /8 2 1/2 $498 $601 $692 $799 SY-FCSN-1972-GR? /8 2 1/2 $560 $676 $778 $898 - Replace '?' with fabric grade when ordering. - Mobile pedestal cushions ship attached. Cushions for non-mobile cargo hubs are affixed using factory-supplied velcro. Fabric Wrapped Cushions - 24" Deep Width Depth Height Grade 1 Grade 2 Grade 3 Grade 4 SY-FCSN-2416-GR? 15 5/8 24 1/8 2 1/2 $222 $268 $308 $353 SY-FCSN-2418-GR? 17 5/8 24 1/8 2 1/2 $230 $276 $317 $364 SY-FCSN-2424-GR? 23 5/8 24 1/8 2 1/2 $249 $300 $344 $397 SY-FCSN-2432-GR? 32 1/8 24 1/8 2 1/2 $274 $332 $381 $439 SY-FCSN-2436-GR? 36 1/8 24 1/8 2 1/2 $287 $348 $400 $460 SY-FCSN-2448-GR? 48 1/8 24 1/8 2 1/2 $383 $464 $534 $614 SY-FCSN-2454-GR? 54 1/8 24 1/8 2 1/2 $431 $522 $600 $690 SY-FCSN-2464-GR? /8 2 1/2 $511 $619 $712 $818 SY-FCSN-2472-GR? /8 2 1/2 $574 $696 $800 $920 - Replace '?' with fabric grade when ordering. - Mobile pedestal cushions ship attached. Cushions for non-mobile cargo hubs are affixed using factory-supplied velcro. 50