Synapse Version 11/20/18

Transcription

1 Synapse Version 11/20/18

2 Synapse

3 Synapse Table of Contents Table of Contents Page Laminates 4 Pulls 5 Product Details 6-17 Worksurfaces Center Beams Support Legs Worksurface Connecting Brackets 31 Spanning Rods Wire Management Baskets 39 Storage Cabinets Storage Cubbies Personal Storage Towers 52 Accessories 53 Cushions 54 Fabric 55 Terms and Conditions 56 Warranty 57 3

4 Laminates Standard Thermofuse Laminate Finishes (TFL) Synapse Black Matching Matte HPL: Arborite AAS405CAP Dove Grey Matching Matte HPL: Wilsonart D92-60 Mahogany Matching Matte HPL: Wilsonart 7122T-60 Tenino Grey Matching Matte HPL: Limited availability; call customer service Black Forest Walnut Matching Matte HPL: Pionite WX421 Witchcraft *Not an exact match Gunmetal Grey Matching Matte HPL: Nevamar S6-20-T Oil Cherry Matching Matte HPL: Pionite WC421-S Tuscan Walnut Matching Matte HPL: Arborite AAW-444-FPP Café Latte* Matching Matte HPL: Not Available Hardrock Maple Matching Matte HPL: Formica Regal White Matching Matte HPL: Arborite 550 Elegant White Yorkshire Cherry Matching Matte HPL: Pionite WC411-N Cognac Iconic Maple Spice Walnut Matching Matte HPL: Pionite HP336N Sunset Matching Matte HPL: Nevamar WM0047-T *Not an exact match Matching Matte HPL: Pionite WW561-N Premium Textured Thermofuse Laminate Finishes (TFL) Intrigue* Matching Matte HPL: Limited availability; call customer service Iron Hemlock Loft Natural Ash* Matching Matte HPL: Pionite W163-OZ Matching Matte HPL: Limited availability; call customer service Matching Matte HPL: Formica 8843-WR Nigh all Rustic Oak* Silverwood* Matching Matte HPL: Supermatte Texture Pionite W292-OZ Matching Matte HPL: Not Available Premium textured TFLs require a 10% upcharge. Add item code OP-TTFL-1. Matching Matte HPL: Limited availability; call customer service Matching 2MM PVC edgebanding is available for all Standard and Premium TFL finishes shown here. *Not available in one piece tops over 96" long. High-Pressure Laminate Finishes (HPL) Pricing shown in this price list applies only to non-premium HPL s as follows: Wilsonart: Solids, Woodgrains, and Abstracts in Matte (-60) finish, Formica: Color Por olio, Woodgrains, and Patterns in Matte (-58) finish Pionite: Solids, Woodgrains, and Abstracts in Suede (N) finish Call customer service for pricing for all other HPLs from the above companies, or for pricing for HPL from Arborite and Nevamar. Additional lead times required for HPL orders depending on material availability and order complexity. Due to engineering, HPL is not available with thin PVC or 3MM PVC. 4

5 Synapse Pulls and Knobs Pulls are included on all drawers and cabinet doors for no upcharge. Premium pulls are available for an upcharge of $23 per pull. To add pulls or order extra, each pull is $35. Standard Pulls Available on All Lines for No Upcharge 101BL 101SN 105SN 108SN 115SN 125SN 201BL 201SN Premium Pulls Available for an Additional $23 per Pull 152SN 154SN 158SN 302SN 304SN 5

6 Product Details Components and Features Synapse Worksurfaces - Synapse worksurfaces are 1-1/8" thick with 45 pound industrial grade particle board core and are available in rectangular and 120 degree shapes. - Overall depths are 48" and 60" with lengths ranging from 42" to 84". - Multiple finish options in Thermofused Laminate (TFL) and High Pressure Laminate (HPL) with DeskMakers standard 2MM PVC edgebanding. - End of Run worksurfaces can be placed on either end. Available in 18" depths. - Center Beam allows optional privacy panels, tackboards, storage, etc. to be mounted directly. Support Legs - Support legs include Open Frame, A-Frame, C-Frame and Laminate end panels. - Recessed middle of run legs allow for uniterrupted seating along the length on both sides of the bench. - The middle of run wire management base conceals floor monuments and features hinged doors on both sides of the base for easy wiring access. Privacy Panels - Synapse offers a variety of privacy panels to define space, create division between users and establish varied degrees of privacy. See the Privacy Panel and Tackboard book for options and pricing. - Tackboards can be added to laminate privacy panels or the Center Spine. - Glass add-on panels can be fixed to the top of the Center Spine to create height and a greater sense of enclosure. Storage - Options include end of run mounted cubbies, overhead storage, low storage and mobile pedestals. - Center placed overhead storage units provide additional storage and create a visual barrier. - Floor storage credenzas are available in two heights, 20" and 23" high; and in two depths, 19" and 24" deep. - Floor storage credenzas provide additional storage and space division, as well as provide seating for impromptu meetings. Power - 1-1/4" wide gap between the worksurface and center beam allows wires and plugs to pass through. - Power can be easily accessed below the worksurface. - S1 System Daisy-Chain Power Connection Boxes easily mount to the underside of the center beam for easy access for each user. Power Connection Boxes are daisy chaining. - Wire baskets provide wire management and cable routing. - See the Electrical book for options and pricing. 6

7 Synapse Understanding Synapse Double Sided Benches Center Beam Spanning Rod Product Details Center Privacy Panel Mid Worksurface Lateral Privacy Partition End Worksurface Lateral Worksurface Connecting Bracket Wire Management Basket Middle of Run Wire Management Support Leg Worksurface Connecting Flat Bracket Middle of Run Support Leg End of Run Support Leg Configurations Rectangular configurations are available in footprints as small as a 2 pack all the way up to a 10 pack. The maximum length of a configuration is 30 feet. 2 Pack 4 Pack 6 Pack 8 Pack 10 Pack 7

8 Product Details Understanding Synapse 120 Configuration Benches Synapse Lateral Worksurface Connecting Bracket Spanning Rod Center Beam Wire Management Basket Center Privacy Panel Mid Worksurface 120 Center Support Leg Middle of Run Wire Management Support Leg Worksurface Connecting Flat Bracket Middle of Run Support Leg 120 Worksurface End of Run Support Leg Configurations 120 degree configurations are available in footprints as small as a tricluster (3 pack), a dogbone (6 pack) or an extended dogbone (8 pack). 3 Pack 6 Pack 8 Pack 8

9 Synapse Synapse Bench Grain Direction Product Details Grain Direction for Double Sided Benches and End of Run Worksurfaces Grain Direction for 120 Configuration Benches Grain Direction for Privacy Panels 9

10 Product Details Synapse Center Beam - Center beams are 3-1/2 wide creating a 1-1/4 wide gap between the worksurface and center beam allowing wires and plugs to pass through to power source below. - Center beam length is the same as worksurface length - A center beam is required for all benches. Center Beam For Rectangular and 120 Configuration Benches 1-1/4" 3-1/2" 1-1/4" CENTER BEAM For use with: - No privacy panels - Glass or Acrylic privacy panels - Double-sided tackboards - Laminate privacy panels with metal clips Center Beam with Center Spine For Rectangular and 120 Configuration Benches 12/18" CENTER SPINE Center Spine: - 1-1/8 thick - 12 or 18 high For use with: - Laminate privacy panels without metal clips - Glass or Acrylic privacy panels mounted on spine - Panel mounted tackboards - Overhead cubbies CENTER BEAM 10

11 Synapse Product Details Support Legs Support leg styles include Open Frame, A-Frame, C-Frame, Laminate for aesthetic and budgetary alternatives. End of Run Metal Support Legs All metal support legs are constructed of 1" thick x 2-1/2" deep steel frame with a powdercoat finish. Open Frame A-Frame C-Frame Cantilevering Metal Support Legs For use only when specifying cubbies or bench end overhanging worksurfaces. Maximum cantilevering overhang is 18". Open Frame A-Frame C-Frame Middle of Run Metal Support Legs - A recessed middle or run support leg allows for uninterrupted seating along the length of the bench. - Used to support tops between end legs and are placed at seams of connecting worksurfaces. - Can use a combination of metal legs with a laminate wire management base. Open Frame A-Frame C-Frame 120 Center Laminate Support Legs When using end panel supports, overall length of setup increases by 2-1/4" (1-1/8" per end panel). Laminate End Panel Wire Management Base

12 Product Details Storage Credenza Configurations Synapse 16" Wide 32"/36" Wide 48"/54" Wide 64"/72" Wide Drawer Storage 16 32/36 32/36 32/36 Hinged Door Storage 16 32/36 32/36 16/18 32/36 32/36 Open Storage 16 32/36 32/36 16/18 32/36 32/36 Combination Storage - Box Lateral and Hinged Door 16/18 16/18 32/36 16/18 32/36 32/36 Combination Storage - Box Lateral and Open Storage 16/18 16/18 32/36 16/18 32/36 32/36 Combination Storage - Hinged Door and Open Storage 16/18 16/18 32/36 16/18 32/36 32/36 - All cabinets with left and right models are shown as left models. - 32" wide combination credenzas consist of (2) 16" wide cabinets. - 36" wide combination credenzas consist of (2) 18" wide cabinets. - 48" wide combination credenzas consist of (1) 32" wide cabinet and (1) 16" wide cabinet. - 54" wide combination credenzas consist of (1) 36" wide cabinet and (1) 18" wide cabinet. - 64" wide credenzas consist of (2) 32" wide cabinets. - 72" wide credenzas consist of (2) 36" wide cabinets. 12

13 Synapse Credenza Finishes Product Details 20" High Pedestals and Credenzas have 4 possible areas that can be specified as desired: Top Finish Case Exterior Drawer/Door Front Pull Style 23" High Pedestals and Credenzas have 5 possible areas that can be specified as desired: Top Finish Case Exterior Drawer/Door Front Plinth Finish Pull Style Personal Storage Tower Configurations 18 24/30 42/54 Shelf Storage Model File Storage Model 42/54 - Personal storage tower is available in left and right models. Right models are shown. - Shelf storage model Includes wardrobe with coat hook, fixed shelf, and two adjustable shelves. - File storage model Includes wardrobe with coat hook, fixed shelf, adjustable shelf and one file drawer. - 24" deep personal storage towers consist of a 24" deep chasis and an 18" deep slide-out. Total depth is 42". - 30" deep personal storage towers consist of a 30" deep chasis and a 24" deep slide-out. Total depth is 54". 13

14 Product Details Understanding Synapse Electric Synapse Surface mounted power units provide power access above the worksurface and conceal cables by plugging into the Power block below the surface. Interconnecting cables connect power blocks to each other. Power enters the bench through the hardwire electrial starter cable. Starter cable is 8 wire, 4 circuit and rated for 20 amp. Double sided power blocks attach to the underside of the Center Beam. Power blocks have 4 outlet positions on both the front and back face. Outlets are interchangable permitting any required circuit combination. 14

15 Synapse S1 System 8 Wire, 4 Circuit Wiring Schematic Product Details Number of Units per Starter Cable Starter Cable Type Double Sided Power Block Single Circuit Plug 2 Units 8 Units Four Circuit Hardwire Calculating Interconnecting Cable Length Center of Power Block to Center of Power Block Center to Center Dimension minus 6" = Length Using S1 System 3 Way Connectors Interconnecting cables connect to the male ends of 3 way connector Power bases or pass-thru cables connect to the female end of 3 way connector 15

16 Product Details S1 System Double Sided Power Block AC-ELS1-08 See Electrical book for pricing 1.93" Synapse 8.6" 2.48" Specifications - (8) power outlets total, (4) on each side - Outlets are removable and interchangable - Mounting bracket included - Available as: - Outlets with Circuits 1, 2, 3 & 4 - Outlets all Circuit 1 - Title 24 with Circuits 2 & 4 controlled ASHRAE 90.1/Title 24 Energy Efficiency Standards - 50% of hardwired receptacles are required to be controlled to automatically shut off, conserving energy when not in use. - Controlled receptacles must be marked with the designated NEC standby mark. ASHRAE 90.1/Title 24 S1 System Power Blocks AC-ELS1-08DS-T24C See Electrical book for pricing (image shown with interface plates - not included) Specifications - Outlets on Circuits 2 & 4 are controlled - Outlets on Circuit 1 & 3 are not controlled - "IG" circuit 3 utility is an isolated circuit and shares neutral and ground 16

17 Synapse Above Surface Power and USB Unit AC-ELSC-01, AC-ELSC-03, AC-ELSC-04, AC-ELSC-05 See Electrical book for pricing Product Details Specifications - Multiple configurations available - Spill resistant power outlets - (2) 2.1A USB charging ports - (1) 72" long 15amp plug cord - Clamp mount - Available finishes: Black, Silver and White see length below 2.19" 2.5" 4.75" AC-ELSC-01: 7.45" AC-ELSC-03: 11.5" AC-ELSC-04: 11.5" AC-ELSC-05: 17

18 Worksurfaces Rectangular Worksurface TFL and HPL Synapse TFL HPL Standard TFL Premium TFL Standard HPL MDF Core 1" Thick Plywood Core Depth Length 21" Deep for 48" Wide Benches 2mm PVC 2mm PVC 2mm PVC SY-WS ??-?? $171 $188 $256 $426 $526 SY-WS ??-?? $184 $202 $277 $434 $541 SY-WS ??-?? $199 $219 $297 $673 $829 SY-WS ??-?? $212 $233 $318 $681 $843 SY-WS ??-?? $226 $249 $340 $688 $858 SY-WS ??-?? $240 $264 $360 $696 $872 SY-WS ??-?? $293 $322 $440 $704 $887 SY-WS ??-?? $309 $340 $463 $712 $901 27" Deep for 60" Wide Benches SY-WS ??-?? $191 $210 $288 $434 $695 SY-WS ??-?? $206 $227 $309 $441 $709 SY-WS ??-?? $219 $241 $330 $681 $723 SY-WS ??-?? $234 $257 $350 $688 $738 SY-WS ??-?? $248 $273 $371 $696 $1,180 SY-WS ??-?? $261 $287 $392 $704 $1,195 SY-WS ??-?? $331 $364 $497 $712 $1,209 SY-WS ??-?? $346 $381 $520 $720 $1,224 T1-A1 - TFL worksurfaces are only available with DeskMakers standard 2MM PVC edgebanding. - HPL worksurfaces with 2mm PVC edges are only available with DeskMakers standard 2MM PVC edgebanding. - For HPL with Self Edge, please add 25% to the HPL with PVC price, OP-HPL1-SELF. - Please see the Materials Specification Guide for specifications and finishes. 2mm PVC Knife Exposed Plywood T2-A1 H1-A1 H1-K1 H1-P1 18

19 Synapse Worksurfaces Rectangular Worksurface 3DL, Veneer and Solid Wood - Subject to minimum order requirements, see below. 3DL Veneer Butcher Block Planked Wood Thermofoil Plain Sawn Quarter Sawn 1-1/2" Thick Maple & Oak 1-1/2" Thick Walnut Maple & Oak Walnut Ergo 2mm Wood 2mm Wood Square Square Square Square Depth Length 3D-J1 V1-M1 V2-M1 BL-L1 BB-L1 PL-L1 PW-L1 21" Deep for 48" Wide Benches SY-WS ??-?? $481 $573 $603 $956 $1,400 $1,247 $1,448 SY-WS ??-?? $537 $598 $628 $1,015 $1,521 $1,424 $1,671 SY-WS ??-?? $594 $877 $938 $1,073 $1,643 $1,595 $1,895 SY-WS ??-?? $651 $903 $964 $1,131 $1,765 $1,659 $1,960 SY-WS ??-?? $708 $928 $989 $1,190 $1,886 $1,832 $2,183 SY-WS ??-?? $764 $954 $1,015 $1,248 $2,008 $2,006 $2,407 SY-WS ??-?? $821 $979 $1,040 $1,306 $2,130 $2,070 $2,472 SY-WS ??-?? $878 $1,005 $1,066 $1,365 $2,251 $2,135 $2,536 27" Deep for 60" Wide Benches SY-WS ??-?? $594 $874 $935 $1,073 $1,643 $1,501 $1,759 SY-WS ??-?? $667 $906 $967 $1,148 $1,799 $1,724 $2,046 SY-WS ??-?? $740 $1,446 $1,567 $1,223 $1,956 $1,947 $2,334 SY-WS ??-?? $813 $1,478 $1,599 $1,298 $2,112 $2,030 $2,417 SY-WS ??-?? $886 $1,510 $1,631 $1,373 $2,269 $2,252 $2,704 SY-WS ??-?? $959 $1,541 $1,663 $1,448 $2,425 $2,476 $2,992 SY-WS ??-?? $1,032 $1,573 $1,695 $1,523 $2,581 $2,559 $3,075 SY-WS ??-?? $1,105 $1,605 $1,727 $1,598 $2,738 $2,642 $3,158-3DL, veneer, butcher block and planked wood worksurfaces may only be ordered as part of a P.O. of at least $25,000 LIST. Please contact customer service for additional information. - Veneer only available in Maple, White Oak and Walnut with clear coat finish. - Butcher block worksurfaces only available in Maple, Red Oak and Walnut with clear coat finish. - Planked wood worksurfaces only available in Maple, White Oak and Walnut with clear coat finish. - Please see the Materials Specification Guide for specifications and finishes.

20 Worksurfaces 120 Degree Worksurface TFL and HPL Synapse TFL HPL Standard TFL Premium TFL Standard HPL MDF Core 1" Thick Plywood Core Depth Length 21" Deep for 48" Wide Benches SY-WS ??-?? /4 $614 $675 $983 $1,195 $1,458 SY-WS ??-?? /4 $789 $868 $1,263 $1,215 $1,492 SY-WS ??-?? /4 $947 $1,042 $1,515 $1,234 $1,523 27" Deep for 60" Wide Benches 2mm PVC 2mm PVC 2mm PVC SY-WS ??-?? /4 $668 $735 $1,067 $1,202 $1,470 SY-WS ??-?? /4 $842 $926 $1,348 $1,222 $1,504 SY-WS ??-?? /4 $999 $1,099 $1,601 $1,241 $2,152 T1-A1 - TFL worksurfaces are only available with DeskMakers standard 2MM PVC edgebanding. - HPL worksurfaces with 2mm PVC edges are only available with DeskMakers standard 2MM PVC edgebanding. - For HPL with Self Edge, please add 25% to the HPL with PVC price, OP-HPL1-SELF. - Please see the Materials Specification Guide for specifications and finishes. 2mm PVC Knife Exposed Plywood T2-A1 H1-A1 H1-K1 H1-P1 Bench End of Run Worksurfaces TFL and HPL TFL HPL Standard TFL Premium TFL Standard HPL MDF Core 1" Thick Plywood Core Rectangular Curved Rectangular Depth 2mm PVC 2mm PVC 2mm PVC SY-WS ??-?? $184 $202 $277 $353 $533 SY-WS ??-?? $212 $233 $318 $522 $836 Curved Length SY-WS ??-?? $321 $353 $482 $362 $542 SY-WS ??-?? $603 $663 $905 $533 $847 T1-A1 - When specifying bench end surfaces, cantilevering support leg must be used. - TFL worksurfaces are only available with DeskMakers standard 2MM PVC edgebanding. - HPL worksurfaces with 2mm PVC edges are only available with DeskMakers standard 2MM PVC edgebanding. - For HPL with Self Edge, please add 25% to the HPL with PVC price, OP-HPL1-SELF. - Please see the Materials Specification Guide for specifications and finishes. 2mm PVC Knife Exposed Plywood T2-A1 H1-A1 H1-K1 H1-P1 20

21 Synapse 120 Degree Worksurface 3DL, Veneer and Solid Wood - Subject to minimum order requirements, see below. Worksurfaces 3DL Veneer Butcher Block Planked Wood Thermofoil Plain Sawn Quarter Sawn 1-1/2" Thick Maple & Oak 1-1/2" Thick Walnut Maple & Oak Walnut Depth Length 21" Deep for 48" Wide Benches 2mm Wood Square Square SY-WS ??-?? /4 $1,313 $1,716 $1,837 NA NA NA NA SY-WS ??-?? /4 $1,624 $1,845 $1,967 NA NA NA NA SY-WS ??-?? /4 $1,936 $1,977 $2,099 NA NA NA NA 27" Deep for 60" Wide Benches Ergo 3D-J1 2mm Wood V1-M1 V2-M1 BL-L1 BB-L1 PL-L1 PW-L1 SY-WS ??-?? /4 $1,479 $1,782 $1,903 NA NA NA NA SY-WS ??-?? /4 $1,806 $1,921 $2,042 NA NA NA NA SY-WS ??-?? /4 NA $2,442 $2,696 NA NA NA NA - 3DL, veneer, butcher block and planked wood worksurfaces may only be ordered as part of a P.O. of at least $25,000 LIST. Please contact customer service for additional information. - Veneer only available in Maple, White Oak and Walnut with clear coat finish. - Butcher block worksurfaces only available in Maple, Red Oak and Walnut with clear coat finish. - Planked wood worksurfaces only available in Maple, White Oak and Walnut with clear coat finish. - Please see the Materials Specification Guide for specifications and finishes. Square Square Bench End of Run Worksurfaces 3DL, Veneer and Solid Wood - Subject to minimum order requirements, see below. 3DL Veneer Butcher Block Planked Wood Thermofoil Plain Sawn Quarter Sawn 1-1/2" Thick Maple & Oak 1-1/2" Thick Walnut Maple & Oak Walnut Rectangular Curved Rectangular Depth 2mm Wood Square Square V2-M1 BL-L1 BB-L1 PL-L1 PW-L1 SY-WS ??-?? $472 $571 $601 $970 $1,429 $1,317 $1,542 SY-WS ??-?? $570 $869 $930 $1,076 $1,649 $1,535 $1,807 Curved Length Ergo 3D-J1 2mm Wood V1-M1 SY-WS ??-?? $472 $580 $610 NA NA NA NA SY-WS ??-?? $570 $880 $941 NA NA NA NA - When specifying bench end surfaces, cantilevering support leg must be used. - 3DL, veneer, butcher block and planked wood worksurfaces may only be ordered as part of a P.O. of at least $25,000 LIST. Please contact customer service for additional information. - Veneer only available in Maple, White Oak and Walnut with clear coat finish. - Butcher block worksurfaces only available in Maple, Red Oak and Walnut with clear coat finish. - Planked wood worksurfaces only available in Maple, White Oak and Walnut with clear coat finish. - Please see the Materials Specification Guide for specifications and finishes. Square Square

22 Center Beams Center Beams TFL and HPL Synapse Standard TFL TFL Premium TFL Standard HPL HPL 1" Thick Plywood Core Depth Length For Use with Rectangular Worksurfaces 2mm PVC 2mm PVC 2mm PVC SY-CTB ??-?? 3 1/2 42 $43 $47 $64 $237 SY-CTB ??-?? 3 1/2 48 $46 $51 $70 $240 SY-CTB ??-?? 3 1/2 54 $50 $55 $76 $244 SY-CTB ??-?? 3 1/2 60 $54 $59 $80 $267 SY-CTB ??-?? 3 1/2 66 $60 $66 $90 $284 SY-CTB ??-?? 3 1/2 72 $66 $73 $99 $290 SY-CTB ??-?? 3 1/2 78 $73 $80 $109 $297 SY-CTB ??-?? 3 1/2 84 $78 $86 $118 $299 For Use with 120 Degree Worksurfaces SY-CTB ??-?? 3 1/2 40-1/4 $41 $45 $61 $237 SY-CTB ??-?? 3 1/2 46-1/4 $44 $48 $67 $240 SY-CTB ??-?? 3 1/2 52-1/4 $48 $53 $73 $244 - A center beam is required for all benches. - For use with laminate or glass privacy screens. May also be specified without a privacy screen. Please see the Privacy Panel and Tackboard pricebook for options. - 78" and 84" worksurfaces with center beam with center spine require two lateral worksurface connecting brackets, see page TFL worksurfaces are only available with DeskMakers standard 2MM PVC edgebanding. - HPL worksurfaces with 2mm PVC edges are only available with DeskMakers standard 2MM PVC edgebanding. - For HPL with Self Edge, please add 25% to the HPL with PVC price, OP-HPL1-SELF. - Please see the Materials Specification Guide for specifications and finishes. T1-A1 Exposed Plywood T2-A1 H1-A1 H1-P1 22

23 Synapse Center Beams 3DL, Veneer and Solid Wood - Subject to minimum order requirements, see below. Center Beams 3DL Veneer Butcher Block Planked Wood Thermofoil Plain Sawn Quarter Sawn 1-1/2" Thick Maple & Oak 1-1/2" Thick Walnut Maple & Oak Walnut Depth Length For Use with Rectangular Worksurfaces 2mm Wood 2mm Wood Square Square V2-M1 BL-L1 BB-L1 PL-L1 PW-L1 SY-CTB ??-?? 3 1/2 42 $179 $238 $245 $309 $388 $497 $533 SY-CTB ??-?? 3 1/2 48 $182 $243 $251 $318 $405 $524 $569 SY-CTB ??-?? 3 1/2 54 $186 $250 $257 $329 $428 $531 $576 SY-CTB ??-?? 3 1/2 60 $194 $264 $270 $340 $451 $551 $612 SY-CTB ??-?? 3 1/2 66 $215 $277 $289 $348 $469 $558 $619 SY-CTB ??-?? 3 1/2 72 $222 $285 $305 $359 $492 $592 $654 SY-CTB ??-?? 3 1/2 78 $229 $301 $312 $370 $515 $599 $662 SY-CTB ??-?? 3 1/2 84 $237 $310 $323 $379 $532 $626 $697 For Use with 120 Degree Worksurfaces Ergo 3D-J1 V1-M1 SY-CTB ??-?? 3 1/2 40-1/4 $179 $238 $245 NA NA NA NA SY-CTB ??-?? 3 1/2 46-1/4 $182 $243 $251 NA NA NA NA SY-CTB ??-?? 3 1/2 52-1/4 $186 $250 $257 NA NA NA NA - A center beam is required for all benches. - For use with laminate or glass privacy screens. May also be specified without a privacy screen. Please see the Privacy Panel and Tackboard pricebook for options. - 78" and 84" worksurfaces with center beam with center spine require two lateral worksurface connecting brackets, see page DL, veneer, butcher block and planked wood worksurfaces may only be ordered as part of a P.O. of at least $25,000 LIST. Please contact customer service for additional information. - Veneer only available in Maple, White Oak and Walnut with clear coat finish. - Butcher block worksurfaces only available in Maple, Red Oak and Walnut with clear coat finish. - Planked wood worksurfaces only available in Maple, White Oak and Walnut with clear coat finish. - Please see the Materials Specification Guide for specifications and finishes. Square Square

24 Center Beams Center Beam With 12" High Center Spine For use with Overhead Cubbies Standard TFL TFL Synapse Premium TFL HPL Standard HPL Depth Length For Use with Rectangular Worksurfaces 2mm PVC 2mm PVC 2mm PVC T1-A1 SY-CTB ??-?? 3 1/ $257 $283 $386 SY-CTB ??-?? 3 1/ $277 $305 $415 SY-CTB ??-?? 3 1/ $302 $332 $457 SY-CTB ??-?? 3 1/ $321 $353 $483 SY-CTB ??-?? 3 1/ $360 $396 $540 SY-CTB ??-?? 3 1/ $392 $431 $589 SY-CTB ??-?? 3 1/ $437 $481 $655 SY-CTB ??-?? 3 1/ $469 $516 $704 For Use with 120 Degree Worksurfaces Height T2-A1 SY-CTB ??-?? 3 1/2 40 1/4 12 $248 $272 $371 SY-CTB ??-?? 3 1/2 46 1/4 12 $270 $297 $406 SY-CTB ??-?? 3 1/2 52 1/4 12 $292 $321 $439 H1-A1 - Center spine extends 12" above Center Beam. - Center spine is 1-1/8" thick material. - 78" and 84" worksurfaces with center beam with center spine require two lateral worksurface connecting brackets, see page Panel mounted tackboards can be affixed to center spine. 6" high glass privacy panels or overhead cubbies can be added to top of spine. Please see Privacy Panel and Tackboard price book for options. - Overhead cubbies can be added to top of spine. Please see pages for overhead cubbies. - TFL worksurfaces are only available with DeskMakers standard 2MM PVC edgebanding. - HPL worksurfaces with 2mm PVC edges are only available with DeskMakers standard 2MM PVC edgebanding. - Please see the Materials Specification Guide for specifactions and finishes. 24

25 Synapse Center Beams Center Beam With 18" High Center Spine For use with Overhead Cubbies Standard TFL TFL Premium TFL HPL Standard HPL 2mm PVC 2mm PVC 2mm PVC Depth Length Height T1-A1 T2-A1 H1-A1 For Use with Rectangular Worksurfaces SY-CTB ??-?? 3 1/ $300 $330 $450 SY-CTB ??-?? 3 1/ $322 $354 $485 SY-CTB ??-?? 3 1/ $353 $388 $529 SY-CTB ??-?? 3 1/ $375 $413 $563 SY-CTB ??-?? 3 1/ $420 $462 $630 SY-CTB ??-?? 3 1/ $458 $504 $686 SY-CTB ??-?? 3 1/ $510 $561 $764 SY-CTB ??-?? 3 1/ $547 $602 $822 For Use with 120 Degree Worksurfaces SY-CTB ??-?? 3 1/2 40 1/4 18 $286 $315 $430 SY-CTB ??-?? 3 1/2 46 1/4 18 $317 $349 $476 SY-CTB ??-?? 3 1/2 52 1/4 18 $345 $380 $518 CENTER BEAMS - Center spine extends 12" above Center Beam. - Center spine is 1-1/8" thick material. - 78" and 84" worksurfaces with center beam with center spine require two lateral worksurface connecting brackets, see page Panel mounted tackboards can be affixed to center spine. 6" high glass privacy panels or overhead cubbies can be added to top of spine. Please see Privacy Panel and Tackboard price book for options. - Overhead cubbies can be added to top of spine. Please see pages for overhead cubbies. - TFL worksurfaces are only available with DeskMakers standard 2MM PVC edgebanding. - HPL worksurfaces with 2mm PVC edges are only available with DeskMakers standard 2MM PVC edgebanding. - Please see the Materials Specification Guide for specifactions and finishes. 25

26 Support Legs End of Run Open Frame Support Leg for Double Sided Benches Synapse Width Height SY-OLG1-48-SLV 47 3/4 28 $401 SY-OLG1-60-SLV 59 3/4 28 $456 - Legs are constructed of 1" thick x 2-1/2" deep steel frame with a powdercoat finish. - Includes two adjustable glides. - For additional colors or chrome finish, please contact Customer Service for upcharge. Cantilevering Open Frame Support Leg for Double Sided Benches Width Height SY-OLG2-48-SLV 47 3/4 28 $530 SY-OLG2-60-SLV 59 3/4 28 $648 - Legs are constructed of 1" thick x 2-1/2" deep steel frame with a powdercoat finish. - For use only when specifying cubbies or bench end overhanging worksurfaces. - Includes two adjustable glides. - For additional colors or chrome finish, please contact Customer Service for upcharge. Middle of Run Open Frame Support Leg for Double Sided Benches Width Height For 48" Wide Benches SY-OLG3-48-SLV 21 3/4 28 $483 For 60" Wide Benches SY-OLG3-60-SLV 31 3/4 28 $509 - Legs are constructed of 1" thick x 2-1/2" deep steel frame with a powdercoat finish. - Includes two adjustable glides. - For additional colors or chrome finish, please contact Customer Service for upcharge. 26

27 Synapse End of Run A-Frame Support Leg for Double Sided Benches Support Legs Top of Leg Width Bottom of Leg Width Height SY-ALG1-48-SLV 37 7/8 47 3/4 28 $375 SY-ALG1-60-SLV 49 7/8 59 3/4 28 $391 - Legs are constructed of 1" thick x 2-1/2" deep steel frame with a powdercoat finish. - Includes two adjustable glides. - For additional colors or chrome finish, please contact Customer Service for upcharge. SUPPORT LEGS Cantilevering A-Frame Support Leg for Double Sided Benches Top of Leg Width Bottom of Leg Width Height SY-ALG2-48-SLV 37 7/8 47 3/4 28 $466 SY-ALG2-60-SLV 49 7/8 59 3/4 28 $583 - Legs are constructed of 1" thick x 2-1/2" deep steel frame with a powdercoat finish. - For use only when specifying cubbies or bench end overhanging worksurfaces. - Includes two adjustable glides. - For additional colors or chrome finish, please contact Customer Service for upcharge. Middle of Run Open Frame Support Leg for Double Sided Benches For 48" Wide Benches SY-ALG3-48-SLV 21 3/4 31 1/4 28 $483 For 60" Wide Benches Top of Leg Width Bottom of Leg Width Height SY-ALG3-60-SLV 31 3/4 41 1/4 28 $509 - Legs are constructed of 1" thick x 2-1/2" deep steel frame with a powdercoat finish. - Includes two adjustable glides. - For additional colors or chrome finish, please contact Customer Service for upcharge. 27

28 Support Legs End of Run C-Frame Support Leg for Double Sided Benches Synapse Width Height SY-CLG1-48-SLV 47 3/4 28 $321 SY-CLG1-60-SLV 59 3/4 28 $375 - Legs are constructed of 1" thick x 2-1/2" deep steel frame with a powdercoat finish. - Includes two adjustable glides. - For additional colors or chrome finish, please contact Customer Service for upcharge. Cantilevering C-Frame Support Leg for Double Sided Benches Width Height SY-CLG2-48-SLV 47 3/4 28 $450 SY-CLG2-60-SLV 59 3/4 28 $568 - Legs are constructed of 1" thick x 2-1/2" deep steel frame with a powdercoat finish. - For use only when specifying cubbies or bench end overhanging worksurfaces. - Includes two adjustable glides. - For additional colors or chrome finish, please contact Customer Service for upcharge. Middle of Run C-Frame Support Leg for Double Sided Benches Width Height For 48" Wide Benches SY-CLG3-48-SLV 21 3/4 28 $428 For 60" Wide Benches SY-CLG3-60-SLV 31 3/4 28 $456 - Legs are constructed of 1" thick x 2-1/2" deep steel frame with a powdercoat finish. - Includes two adjustable glides. - For additional colors or chrome finish, please contact Customer Service for upcharge. 28

29 Synapse End of Run Laminate Panel Support Leg for Double Sided Benches Support Legs Width Height TFL (T) HPL (H) SY-EPL1-48-? $332 $525 SY-EPL1-60-? $354 $546 SUPPORT LEGS - When using end panel supports, overall length of setup increases by 2-1/4" (1-1/8" per end panel). - Includes metal mounting bracket and two adjustable glides. - Edges are DeskMakers standard 2MM PVC edgebanding. Middle of Run Wire Management Support Leg for Double Sided Benches Width Depth For 48" Wide Benches SY-WML1-48-? 21 3/ $826 $1,341 For 60" Wide Benches Height TFL (T) SY-WML1-60-? 31 3/ $842 $1,356 - Includes hinged access doors both sides. - Includes adjustable glides. - Edges are DeskMakers standard 2MM PVC edgebanding. - For rolled stainless steel to the doors only, add SY-OPTN-BOX-STL for $514. Edges with rolled steel finish are 2MM PVC. HPL (H) 29

30 Support Legs 120 Center Support Leg for Cluster Configuration Benches Synapse Width Height For 48" Wide Benches SY-CNLG-48-SLV 27 3/4 28 $643 For 60" Wide Benches SY-CNLG-60-SLV 38 1/4 28 $750 - Bases are constructed of 1" thick x 2-1/2" deep steel frame with a powdercoat finish. - Dimensions are nominal. - Includes two adjustable glides. - For additional colors or chrome finish, please contact Customer Service for upcharge. 30

31 Synapse Worksurface Connecting Flat Bracket Supporting Brackets Width Length SUPPORT LEGS AND BRACKETS AC-BRKT-FLAT 3 1/2 6 1/2 $18 - Worksurface connecting flat brackets must be specified to connect two worksurfaces together, providing required support. - Available in black finish only. (These are the same brackets DeskMakers uses for connecting desks to returns.) - Includes required wood screws. Lateral Worksurface Connecting U-Bracket Width Length SY-BRKT-U 2 1/2 19 3/4 $57 - Lateral worksurface connecting brackets must be specified to connect two worksurfaces to the center beam, providing required support. Tops 42" to 72" long require one lateral bracket, 78" and 84" worksurfaces require two lateral brackets. - Available in silver finish only. - Includes required wood screws. 31

32 Spanning Rods Spanning Rods - For Double Sided Benches Synapse Single Run (A) Used for benches that are one section and do not have a middle of run section. Rods connect End of Run Support Legs to End of Run Support Legs. A End of Run Support Leg End of Run (B) Used for end sections of Benches. Rods Connect End of Run Support Legs to Middle of Run Support Legs. B B Middle of Run Support Leg End of Run Support Leg Middle of Run (C) Used for middle sections of Benches. Rods connect Middle of Run Support Legs to Middle of Run Support Legs. B C B Middle of Run Support Leg End of Run Support Leg Cantilevering (D) Used for end sections of Benches. Rods connect Cantilevering Support Legs to Middle of Run Support Legs. B D Middle of Run Support Leg Cantilevering Support Leg 32

33 Synapse Spanning Rod Single Run (A) Worksurface Length Spanning Rods Rod Length Worksurface Length Rod Length SY-RDSR /4 $60 SY-RDSR /4 $70 SY-RDSR /4 $79 SY-RDSR /4 $88 SY-RDSR /4 $99 SY-RDSR /4 $108 SY-RDSR /4 $118 SY-RDSR /4 $128 SPANNING RODS - Spanning rods are approximately 1" square steel with a powdercoat finish. - Single run benches with 72", 78" and 84" worksurfaces and an overhead cubby require a middle of run support leg and two lateral worksurface connecting brackets. - For laminate panel support legs use middle of run spanning rods. B Cantilevering Support Leg - If using cantilevering legs on both ends of bench, specify end of run to middle of run (SY-RDER) spanning rods. 33

34 Spanning Rods Spanning Rod End of Run (B) Synapse Worksurface Length Rod Length Worksurface Length Rod Length SY-RDER /4 $64 SY-RDER /4 $74 SY-RDER /4 $83 SY-RDER /4 $94 SY-RDER /4 $103 SY-RDER /4 $112 SY-RDER /4 $122 SY-RDER /4 $132 - Spanning rods are approximately 1" square steel with a powdercoat finish. - Laminate panel support legs use middle of run spanning rods for the end of run location. Spanning Rod Cantilevering End of Run (D) Worksurface Length Rod Length Worksurface Length Rod Length SY-RDCR /2 $66 SY-RDCR /2 $75 SY-RDCR /2 $85 SY-RDCR /2 $95 SY-RDCR /2 $104 SY-RDCR /2 $114 SY-RDCR /2 $124 SY-RDCR /2 $133 - Spanning rods are approximately 1" square steel with a powdercoat finish. 34

35 Synapse Spanning Rod Middle of Run (C) Worksurface Length Worksurface Length Spanning Rods Rod Length Rod Length Worksurface Length Rod Length SY-RDMR /4 $69 SY-RDMR /4 $78 SY-RDMR /4 $87 SY-RDMR /4 $98 SPANNING RODS SY-RDMR /4 $107 SY-RDMR /4 $116 SY-RDMR /4 $127 SY-RDMR /4 $136 - Spanning rods are approximately 1" square steel with a powdercoat finish. - Laminate panel support legs use middle of run spanning rods for the end of run location. 35

36 Spanning Rods Spanning Rods - For 120 Configuration Benches Synapse Tri-Cluster (E) Used for Tri-Cluster 120 benches that are three 120 sections. Rods connect End of Run Support Legs to 120 Center Support Leg. E E E 120 Center Support Leg End of Run Support Leg Dogbone (F) Used for connecting two Tri-Cluster bench sections together. Rods connect 120 Center Support Legs to Middle of Run Support Legs. E E F F E E 120 Center Support Leg Middle of Run Support Leg End of Run Support Leg Middle of Run (C) - See Page 29 The same Middle of Run rods for Double Sided Benches are used for 120 Configuration Benches. Rods connect Middle of Run Support Legs to Middle of Run Support Legs. E E F C F E E 120 Center Support Leg Middle of Run Support Leg End of Run Support Leg 36

37 Synapse Spanning Rods Spanning Rod Tri-Cluster (E) Worksurface Length Rod Length For 48" Wide Benches Worksurface Length Rod Length SY-RDTC /4 $60 SY-RDTC /4 $70 SY-RDTC /4 $79 SPANNING RODS For 60" Wide Benches SY-RDTC $60 SY-RDTC $70 SY-RDTC $79 - Spanning rods are approximately 1" square steel with a powdercoat finish. - Laminate panel support legs use middle of run spanning rods for the end of run location. 37

38 Spanning Rods Spanning Rod Dogbone (F) Worksurface Length Synapse Rod Length For 48" Wide Benches SY-RDDB $64 SY-RDDB $74 SY-RDDB $83 For 60" Wide Benches Worksurface Length Rod Length SY-RDDB /8 $64 SY-RDDB /8 $74 SY-RDDB /8 $83 - Spanning rods are approximately 1" square steel with a powdercoat finish. - Laminate panel support legs use middle of run spanning rods for the end of run location. - Dimensions are nominal. Cantilevering Support Leg F F E 120 Center Support Leg End of Run Support Leg Cantilevering Support Leg - If using cantilevering legs on 120 degree benches, specify dogbone middle of run to 120 center support leg (SY-RDDB) spanning rods. 38

39 Synapse Wire Management Baskets Wire Management Baskets Width Length Height SY-WMBT $100 SY-WMBT $105 SY-WMBT $133 SY-WMBT $147 SY-WMBT $154 - Includes mounting brackets. - Silver finish. - Overall height with mounting brackets is 5". Power WIRE MANAGEMENT BASKETS 39

40 Storage Cabinets Metal Mobile Box/File Pedestal Synapse Color Width Depth Height MF-MPE1-SM (Silver Metallic) $562 MF-MPE1-WT (White) $562 MF-MPE1-BK (Black) $562 - Ships in individual carton. - For laminate drawer faces with standard finishes and pulls, add MF-OPTN-FT for $148. For Premium pulls Include OP-PULL-25 for $23 List per pull. Metal Mobile Box/File Pedestal with Cushion Color Width Depth Height Grade 1 Grade 2 Grade 3 Grade 4 MF-MPE2-SM-GR? (Silver Metallic) $699 $754 $811 $866 MF-MPE2-WT-GR? (White) $699 $754 $811 $866 MF-MPE2-BK-GR? (Black) $699 $754 $811 $866 - Ships in individual carton. - For laminate drawer faces with standard finishes and pulls, add MF-OPTN-FT for $148. For Premium pulls Include OP-PULL-25 for $23 List per pull. - See website for fabric selections. Skinny Metal Mobile Box/File Pedestal Color Width Depth Height MF-MPSK-SM (Silver Metallic) $541 MF-MPSK-WT (White) $541 MF-MPSK-BK (Black) $541 - Ships in individual carton. - For laminate drawer faces with standard finishes and pulls, add MF-OPTN-FT for $148. For Premium pulls Include OP-PULL-25 for $23 List per pull. Skinny Metal Mobile Box/File Pedestal with Cushion Color Width Depth Height Grade 1 Grade 2 Grade 3 Grade 4 MF-MPSK-SM-GR? (Silver Metallic) $666 $717 $768 $818 MF-MPSK-WT-GR? (White) $666 $717 $768 $818 MF-MPSK-BK-GR? (Black) $666 $717 $768 $818 - Ships in individual carton. - For laminate drawer faces with standard finishes and pulls, add MF-OPTN-FT for $148. For Premium pulls Include OP-PULL-25 for $23 List per pull. - See website for fabric selections. 40

41 Synapse Mobile Box/File Pedestal Width Depth Height Storage Cabinets SS-MBBF $744 - Five locking casters for stability. - Accomodates letter-size filing front to back, or legal-size filing side to side. Mobile Box/File Pedestal with Cushion Width Depth Height Grade 1 Grade 2 Grade 3 Grade 4 SS-MBCS-1622-GR? $857 $914 $969 $1,026 - Five locking casters for stability. - Accomodates letter-size filing front to back, or legal-size filing side to side. - Replace '?' with fabric grade. See website for fabric selections. 20" High Statonary Box/File Pedestal Width Depth Height SY-SBFL $545 SY-SBFL $592 - Includes adjustable glides. - Accomodates letter-size filing front to back, or legal-size filing side to side. - See page 50 for option to add fabric cushion. 23" High Statonary Box/File Pedestal STORAGE CABINETS Width Depth Height SY-SBFP $679 SY-SBFP $725 - Includes 3" high recessed plinth with concealed adjustable glides. - Accomodates letter-size filing front to back, or legal-size filing side to side. - See page 50 for option to add fabric cushion. 41

42 Storage Cabinets 25" High Stationary Box/Box/File Pedestal Width Depth Height Synapse SY-SBBF $665 SY-SBBF $718 - Includes adjustable glides. - Lock standard. - Accomodates letter-size filing front to back, or legal-size filing side to side. 28" High Stationary Box/Box/File Pedestal Width Depth Height SY-SBBP $798 SY-SBBP $852 - Lock standard. - Includes 3" high recessed plinth with concealed adjustable glides. - Accomodates letter-size filing front to back, or legal-size filing side to side. 25" High Stationary File/File Pedestal Width Depth Height SY-SFFL $665 SY-SFFL $718 - Includes adjustable glides. - Lock standard. - Accomodates letter-size filing front to back, or legal-size filing side to side. 28" High Stationary File/File Pedestal Width Depth Height SY-SFFP $798 SY-SFFP $852 - Lock standard. - Includes 3" high recessed plinth with concealed adjustable glides. - Accomodates letter-size filing front to back, or legal-size filing side to side. 42

43 Synapse Storage Cabinets 20" High Box/Lateral Credenza Width Depth Height 32/36 64/72 SY-BLFL $832 SY-BLFL $909 SY-BLFL $945 SY-BLFL $1,034 SY-BLFL $1,465 SY-BLFL $1,567 SY-BLFL $1,666 SY-BLFL $1,805 - Includes adjustable glides. - Lock standard. - Lateral file drawer allows for two rows front to back legal or letter filing or one row of side to side legal filing. - On 24" deep credenzas, case is deeper but drawers are same depth as 19" case. - See page 50 for option to add fabric cushion. 23" High Box/Lateral Credenza Width Depth Height 32/36 64/72 SY-BLFP $966 SY-BLFP $1,043 SY-BLFP $1,080 SY-BLFP $1,168 SY-BLFP $1,600 SY-BLFP $1,722 SY-BLFP $1,799 SY-BLFP $1,939 - Includes 3" high recessed plinth with concealed adjustable glides. - Lock standard. - Lateral file drawer allows for two rows front to back legal or letter filing or one row of side to side legal filing. - On 24" deep credenzas, case is deeper but drawers are same depth as 19" case. - See page 50 for option to add fabric cushion. STORAGE CABINETS

44 Storage Cabinets 20" High Hinged Door Credenza Synapse 16 32/36 48/54 64/72 16" & 48/54" Cabinets Left Model Shown Le Model Right Model Width Depth Height SY-DRCL-1916-L SY-DRCL-1916-R $546 SY-DRCL-2416-L SY-DRCL-2416-R $581 SY-DRCL $804 SY-DRCL $881 SY-DRCL $913 SY-DRCL $1,000 SY-DRCL-1948-L SY-DRCL-1948-R $1,159 SY-DRCL-2448-L SY-DRCL-2448-R $1,251 SY-DRCL-1954-L SY-DRCL-1954-R $1,318 SY-DRCL-2454-L SY-DRCL-2454-R $1,422 SY-DRCL $1,407 SY-DRCL $1,530 SY-DRCL $1,600 SY-DRCL $1,739 - Includes adjustable glides. - Single shelf per bay included. For each extra shelf -- use OP-SHLF-2 for $ Lock NOT standard. For lock on doors per bay, add OP-LOCK-2 for $86. - See page 50 for option to add fabric cushion. 23" High Hinged Door Credenza 16 32/36 48/54 64/72 16" & 48/54" Cabinets Left Model Shown Le Model Right Model Width Depth Height SY-DRCP-1916-L SY-DRCP-1916-R $680 SY-DRCP-2416-L SY-DRCP-2416-R $716 SY-DRCP $937 SY-DRCP $1,014 SY-DRCP $1,046 SY-DRCP $1,135 SY-DRCP-1948-L SY-DRCP-1948-R $1,293 SY-DRCP-2448-L SY-DRCP-2448-R $1,385 SY-DRCP-1954-L SY-DRCP-1954-R $1,452 SY-DRCP-2454-L SY-DRCP-2454-R $1,556 SY-DRCP $1,541 SY-DRCP $1,664 SY-DRCP $1,734 SY-DRCP $1,872 - Includes 3" high recessed plinth with concealed adjustable glides. - Single shelf per bay included. For each extra shelf -- use OP-SHLF-2 for $ Lock NOT standard. For lock on doors per bay, add OP-LOCK-2 for $86. - See page 50 for option to add fabric cushion. 44

45 Synapse 20" High Open Storage Credenza Width Depth Height Storage Cabinets 16 32/36 48/54 64/72 48/54" Cabinet Left Model Shown SY-BKCL $503 SY-BKCL $546 SY-BKCL $695 SY-BKCL $754 SY-BKCL $790 SY-BKCL $857 SY-BKCL-1948-L SY-BKCL-1948-R $990 SY-BKCL-2448-L SY-BKCL-2448-R $1,065 SY-BKCL-1954-L SY-BKCL-1954-R $1,023 SY-BKCL-2454-L SY-BKCL-2454-R $1,100 SY-BKCL $1,173 SY-BKCL $1,253 SY-BKCL $1,332 SY-BKCL $1,425 - Includes adjustable glides. - Single shelf per bay included. For each extra shelf -- use OP-SHLF-2 for $ See page 50 for option to add fabric cushion. 23" High Open Storage Credenza 16 32/36 48/54 64/72 48/54" Cabinet Left Model Shown Width Depth Height SY-BKCP $638 SY-BKCP $680 SY-BKCP $829 SY-BKCP $888 SY-BKCP $925 SY-BKCP $991 SY-BKCP-1948-L SY-BKCP-1948-R $1,123 SY-BKCP-2448-L SY-BKCP-2448-R $1,199 SY-BKCP-1954-L SY-BKCP-1954-R $1,156 SY-BKCP-2454-L SY-BKCP-2454-R $1,234 SY-BKCP $1,307 SY-BKCP $1,387 SY-BKCP $1,496 SY-BKCP $1,559 - Includes 3" high recessed plinth with concealed adjustable glides. - Single shelf per bay included. For each extra shelf -- use OP-SHLF-2 for $ See page 50 for option to add fabric cushion. STORAGE CABINETS 45

46 Storage Cabinets 20" High Combination Credenza - Box/Lateral with Open Storage Synapse 32/36 48/54 64/72 Left Models Shown Width Depth Height Le Model Right Model SY-BLBL-1932-L SY-BLBL-1932-R $1,084 SY-BLBL-2432-L SY-BLBL-2432-R $1,170 SY-BLBL-1936-L SY-BLBL-1936-R $1,084 SY-BLBL-2436-L SY-BLBL-2436-R $1,176 SY-BLBL-1948-L SY-BLBL-1948-R $1,100 SY-BLBL-2448-L SY-BLBL-2448-R $1,192 SY-BLBL-1954-L SY-BLBL-1954-R $1,250 SY-BLBL-2454-L SY-BLBL-2454-R $1,355 SY-BLBL-1964-L SY-BLBL-1964-R $1,266 SY-BLBL-2464-L SY-BLBL-2464-R $1,363 SY-BLBL-1972-L SY-BLBL-1972-R $1,438 SY-BLBL-2472-L SY-BLBL-2472-R $1,550 - Includes adjustable glides. - Single shelf per bay included. For each extra shelf -- use OP-SHLF-2 for $ Lock standard on box lateral cabinet. - Lateral file drawer allows for two rows front to back legal or letter filing, or one row of side to side legal filing. - On 24" deep credenzas, case is deeper but drawers are same depth as 19" case. - See page 50 for option to add fabric cushion. 23" High Combination Credenza - Box/Lateral with Open Storage 32/36 48/54 64/72 Left Models Shown Width Depth Height Le Model Right Model SY-BLBP-1932-L SY-BLBP-1932-R $1,208 SY-BLBP-2432-L SY-BLBP-2432-R $1,298 SY-BLBP-1936-L SY-BLBP-1936-R $1,218 SY-BLBP-2436-L SY-BLBP-2436-R $1,310 SY-BLBP-1948-L SY-BLBP-1948-R $1,234 SY-BLBP-2448-L SY-BLBP-2448-R $1,326 SY-BLBP-1954-L SY-BLBP-1954-R $1,384 SY-BLBP-2454-L SY-BLBP-2454-R $1,489 SY-BLBP-1964-L SY-BLBP-1964-R $1,400 SY-BLBP-2464-L SY-BLBP-2464-R $1,498 SY-BLBP-1972-L SY-BLBP-1972-R $1,572 SY-BLBP-2472-L SY-BLBP-2472-R $1,684 - Includes 3" high recessed plinth with concealed adjustable glides. - Single shelf per bay included. For each extra shelf -- use OP-SHLF-2 for $ Lock standard on box lateral cabinet. - Lateral file drawer allows for two rows front to back legal or letter filing, or one row of side to side legal filing. - On 24" deep credenzas, case is deeper but drawers are same depth as 19" case. - See page 50 for option to add fabric cushion. 46

47 Synapse 20" High Combination Credenza - Hinged Door with Open Storage Storage Cabinets 32/36 48/54 64/72 Left Models Shown Le Model Right Model Width Depth Height - Includes adjustable glides. - Single shelf per bay included. For each extra shelf -- use OP-SHLF-2 for $ Lock NOT standard. For lock on doors per bay, add OP-LOCK-2 for $86. - See page 50 for option to add fabric cushion. SY-DBKL-1932-L SY-DBKL-1932-R $849 SY-DBKL-2432-L SY-DBKL-2432-R $911 SY-DBKL-1936-L SY-DBKL-1936-R $964 SY-DBKL-2436-L SY-DBKL-2436-R $1,035 SY-DBKL-1948-L SY-DBKL-1948-R $1,071 SY-DBKL-2448-L SY-DBKL-2448-R $1,164 SY-DBKL-1954-L SY-DBKL-1954-R $1,217 SY-DBKL-2454-L SY-DBKL-2454-R $1,322 SY-DBKL-1964-L SY-DBKL-1964-R $1,238 SY-DBKL-2464-L SY-DBKL-2464-R $1,334 SY-DBKL-1972-L SY-DBKL-1972-R $1,405 SY-DBKL-2472-L SY-DBKL-2472-R $1,516 23" High Combination Credenza - Hinged Door with Open Storage 32/36 48/54 64/72 Left Models Shown Le Model Right Model Width Depth Height SY-DBKP-1932-L SY-DBKP-1932-R $983 SY-DBKP-2432-L SY-DBKP-2432-R $1,044 SY-DBKP-1936-L SY-DBKP-1936-R $1,098 SY-DBKP-2436-L SY-DBKP-2436-R $1,169 SY-DBKP-1948-L SY-DBKP-1948-R $1,205 SY-DBKP-2448-L SY-DBKP-2448-R $1,297 SY-DBKP-1954-L SY-DBKP-1954-R $1,351 SY-DBKP-2454-L SY-DBKP-2454-R $1,456 SY-DBKP-1964-L SY-DBKP-1964-R $1,371 SY-DBKP-2464-L SY-DBKP-2464-R $1,468 SY-DBKP-1972-L SY-DBKP-1972-R $1,539 SY-DBKP-2472-L SY-DBKP-2472-R $1,650 - Includes 3" high recessed plinth with concealed adjustable glides. - Single shelf per bay included. For each extra shelf -- use OP-SHLF-2 for $ Lock NOT standard. For lock on doors per bay, add OP-LOCK-2 for $86. - See page 50 for option to add fabric cushion. STORAGE CABINETS 47

48 Storage Cabinets 20" High Combination Credenza - Box/Lateral with Hinged Door Synapse 32/36 48/54 64/72 Left Models Shown Width Depth Height Le Model Right Model SY-BLDL-1932-L SY-BLDL-1932-R $1,156 SY-BLDL-2432-L SY-BLDL-2432-R $1,252 SY-BLDL-1936-L SY-BLDL-1936-R $1,173 SY-BLDL-2436-L SY-BLDL-2436-R $1,264 SY-BLDL-1948-L SY-BLDL-1948-R $1,189 SY-BLDL-2448-L SY-BLDL-2448-R $1,280 SY-BLDL-1954-L SY-BLDL-1954-R $1,351 SY-BLDL-2454-L SY-BLDL-2454-R $1,455 SY-BLDL-1964-L SY-BLDL-1964-R $1,436 SY-BLDL-2464-L SY-BLDL-2464-R $1,560 SY-BLDL-1972-L SY-BLDL-1972-R $1,633 SY-BLDL-2472-L SY-BLDL-2472-R $1,772 - Includes adjustable glides. - Single shelf per bay included. For each extra shelf -- use OP-SHLF-2 for $ Lock standard on box lateral cabinet. For lock on doors per bay, add OP-LOCK-2 for $86. - Lateral file drawer allows for two rows front to back legal or letter filing, or one row of side to side legal filing. - On 24" deep credenzas, case is deeper but drawers are same depth as 19" case. - See page 50 for option to add fabric cushion. 23" High Combination Credenza - Box/Lateral with Hinged Door 32/36 48/54 64/72 Left Models Shown Width Depth Height Le Model Right Model SY-BLDP-1932-L SY-BLDP-1932-R $1,292 SY-BLDP-2432-L SY-BLDP-2432-R $1,387 SY-BLDP-1936-L SY-BLDP-1936-R $1,307 SY-BLDP-2436-L SY-BLDP-2436-R $1,398 SY-BLDP-1948-L SY-BLDP-1948-R $1,323 SY-BLDP-2448-L SY-BLDP-2448-R $1,414 SY-BLDP-1954-L SY-BLDP-1954-R $1,485 SY-BLDP-2454-L SY-BLDP-2454-R $1,588 SY-BLDP-1964-L SY-BLDP-1964-R $1,570 SY-BLDP-2464-L SY-BLDP-2464-R $1,693 SY-BLDP-1972-L SY-BLDP-1972-R $1,766 SY-BLDP-2472-L SY-BLDP-2472-R $1,905 - Includes 3" high recessed plinth with concealed adjustable glides. - Single shelf per bay included. For each extra shelf -- use OP-SHLF-2 for $ Lock standard on box lateral cabinet. For lock on doors per bay, add OP-LOCK-2 for $86. - Lateral file drawer allows for two rows front to back legal or letter filing, or one row of side to side legal filing. - On 24" deep credenzas, case is deeper but drawers are same depth as 19" case. - See page 50 for option to add fabric cushion. 48

49 Synapse Storage Cubby - Cantilevering Open Cubby Width Depth Height Storage Cubbies SY-HCU $707 SY-HCU $765 - Units have 1-1/8" bottom, 3/4" sides, and 3/4" top. - Add whiteboard to outside back of unit. Use SY-OPTN-CBWB for $129. Storage Cubby - Cantilevering Cubby with Sliding Doors Width Depth Height Frosted Acrylic (A) SY-HCU ? $977 $1,029 SY-HCU ? $1,033 $1,087 - Units have 1-1/8" bottom, 3/4" sides, and 3/4" top. - Add whiteboard to outside back of unit. Use SY-OPTN-CBWB for $ Decorative acrylic and glass options available on a per-quote basis. Contact customer service. Acid-Etched Glass (G) Additional Information about Cantivelering Cubbies STORAGE CABINETS - Cantilevering cubbies may face inward or outward. - Cubby width must match the depth of bench. - Must be specified with cantilevering support legs. 49

50 Storage Cubbies Open Overhead Cubby For Mounting on Center Beam with Center Spine Synapse No Center Partition SY-SHS $474 SY-SHS $486 SY-SHS $511 SY-SHS $547 SY-SHS $581 Center Partition Width Depth Height SY-SHS $616 SY-SHS $729 SY-SHS $759 SY-SHS $789 SY-SHS $821 - Units have all 3/4" material. - Single run benches with 72", 78" and 84" worksurfaces and an overhead cubby require a middle of run support leg and two lateral worksurface connecting brackets. Overhead Cubby with Sliding Doors For Mounting on Center Beam with Center Spine Width Depth Height Frosted Acrylic (A) Acid-Etched Glass (G) SY-SHS ? $821 $861 SY-SHS ? $942 $990 SY-SHS ? $984 $1,034 SY-SHS ? $1,014 $1,067 SY-SHS ? $1,044 $1,097 SY-SHS ? $1,075 $1,128 SY-SHS ? $1,106 $1,162 - Units have all 3/4" material. - Decorative acrylic and glass options available on a per-quote basis. Contact customer service. - Single run benches with 72", 78" and 84" worksurfaces and an overhead cubby require a middle of run support leg and two lateral worksurface connecting brackets. 50

51 Synapse Storage Cubbies Shared Open Overhead Cubby For Mounting on Center Beam with Center Spine or Metal Support Legs Left Opening Shown Width Depth Height Le Opening Right Opening SY-SHS L SY-SHS R $632 SY-SHS L SY-SHS R $669 SY-SHS L SY-SHS R $759 SY-SHS L SY-SHS R $789 SY-SHS L SY-SHS R $821 SY-SHS L SY-SHS R $851 SY-SHS L SY-SHS R $881 SY-SHS L SY-SHS R $911 - Units have all 3/4" material. - Units have openings on both sides so it can be placed in center of workstations facing each other. - Add TX-OPTN-CBWB for $111 for dry erase whiteboard material on the back of one side. (Use quantity of two for both sides.) - Add TX-OPTN-CBTB-? for fabric tackboard on the back of one side, where '?' represents fabric grade. Grade 1: $239, Grade 2: $292, Grade 3: $339, Grade 4: $380. See page website for fabrics. - Single run benches with 72", 78" and 84" worksurfaces and an overhead cubby require a middle of run support leg and two lateral worksurface connecting brackets. 1-Inch Square, 3-3/8" High Support Leg For Overhead Cubby Support TX-SLEG-02 $34 - Leg is 1" square. - Used to support a cubby unit resting on a storage cabinet or worksurface. - Add TX-OPTN-AKIT for $7 for set of two special attachment screws to permanently affix leg to storage cabinet or worksurface. 1-Inch Square, 8-3/8" High Support Leg For Overhead Cubby Support STORAGE CUBBIES TX-SLEG-03 $54 - Leg is 1" square. - Used to support a cubby unit resting on a Storage Cabinet or Worksurface. - Add TX-OPTN-AKIT for $7 for set of two special attachment screws to permanently affix leg to storage cabinet or worksurface. 51

52 Storage Towers Personal Storage Tower - Shelf Storage Model Single Pull-Out Door Synapse 24" Model 30" Model Right Model Shown Powered Model Right Model Shown Powered Model Width Depth Height Le Model Right Model SY-PST L SY-PST R $2,137 SY-PST LPWR SY-PST RPWR $2,541 SY-PST L SY-PST R $2,282 SY-PST LPWR SY-PST RPWR $2,685-24" Deep model includes fixed shelf and two adjustable shelves. - 30" Deep model includes wardrobe with coat hook, fixed shelf and two adjustable shelves. - Powered model includes power unit with two outlets and two USB charging ports. Power unit has 108" long cord with plug. Power unit is field installed into factory cut hole. Includes 2.5" grommet in side for routing cord. - Includes adjustable glides. - Lock NOT standard. For lock on doors per bay, add OP-LOCK-2 for $86. Personal Storage Tower - File Storage Model Single Pull-Out Door Right Model Shown Powered Model Width Depth Height Le Model Right Model SY-PST L SY-PST R $2,739 SY-PST LPWR SY-PST RPWR $3,154 - Includes wardrobe with coat hook, fixed shelf, adjustable shelf and one file drawer. - Powered model includes power unit with two outlets and two USB charging ports. Power unit has 108" long cord with plug. Power unit is field installed into factory cut hole. Includes 2.5" grommet in side for routing cord. - Includes adjustable glides. - Lock NOT standard. For lock on doors per bay, add OP-LOCK-2 for $86. 52

53 Synapse Accessories Slide On Privacy Partition For Lateral Privacy For 21" Deep Worksurfaces SY-PRP ? $375 $568 For 27" Deep Worksurfaces Height Length TFL (T) - 3/4" thick material with 2MM PVC edgebanding. - Attached via brackets and wood screws below the worksurface. - HPL available. Contact customer service for pricing. - Cannot add tackboards. Whiteboard (W) SY-PRP ? $407 $600 Single Monitor - Monitor Arm AC-MONT-ARM1 $340 - Units ship individually boxed. - Includes both desk clamp and bolt through mounting options. Must be field installed. - Suitable for displays from 12" to 24". - Polished silver finsih. Dual Monitor - Monitor Arm AC-MONT-ARM2 $583 Swivel Organizer - Units ship individually boxed. - Includes both desk clamp and bolt through mounting options. Must be field installed. - Suitable for displays from 12" to 24". - Polished silver finsih. Color Width Depth Height ACCESSORIES AC-RORG-SL Silver 13 5/8 8 1/4 1 3/8 $27 AC-RORG-CL Clear 13 5/8 8 1/4 1 3/8 $27 AC-RORG-BK Black 13 5/8 8 1/4 1 3/8 $27 - Units ship boxed with installation hardware. Must be field installed. Swivel Organizer - Small Color Width Depth Height AC-ORG2-SL Silver 9 7 1/2 1 $22 AC-ORG2-BK Black 9 7 1/2 1 $22 - Units ship boxed with installation hardware. Must be field installed. 53

54 Cushions Synapse Fabric Wrapped Cushions - 19" Deep Width Depth Height Grade 1 Grade 2 Grade 3 Grade 4 SY-FCSN-1916-GR? 15 5/8 18 1/8 2 1/2 $212 $266 $309 $357 SY-FCSN-1918-GR? 17 5/8 18 1/8 2 1/2 $219 $276 $318 $367 SY-FCSN-1924-GR? 23 5/8 18 1/8 2 1/2 $249 $300 $347 $400 SY-FCSN-1932-GR? 32 1/8 18 1/8 2 1/2 $277 $334 $386 $444 SY-FCSN-1936-GR? 36 1/8 18 1/8 2 1/2 $291 $352 $405 $467 SY-FCSN-1948-GR? 48 1/8 18 1/8 2 1/2 $389 $469 $540 $623 SY-FCSN-1954-GR? 54 1/8 18 1/8 2 1/2 $437 $527 $607 $701 SY-FCSN-1964-GR? /8 2 1/2 $518 $625 $720 $831 SY-FCSN-1972-GR? /8 2 1/2 $582 $703 $809 $934 - Replace '?' with fabric grade when ordering. - Mobile pedestal cushions ship attached. Cushions for non-mobile cargo hubs are affixed using factory-supplied velcro. Fabric Wrapped Cushions - 24" Deep Width Depth Height Grade 1 Grade 2 Grade 3 Grade 4 SY-FCSN-2416-GR? 15 5/8 24 1/8 2 1/2 $231 $279 $320 $367 SY-FCSN-2418-GR? 17 5/8 24 1/8 2 1/2 $239 $287 $330 $379 SY-FCSN-2424-GR? 23 5/8 24 1/8 2 1/2 $259 $312 $358 $413 SY-FCSN-2432-GR? 32 1/8 24 1/8 2 1/2 $285 $345 $396 $457 SY-FCSN-2436-GR? 36 1/8 24 1/8 2 1/2 $298 $362 $416 $478 SY-FCSN-2448-GR? 48 1/8 24 1/8 2 1/2 $398 $483 $555 $639 SY-FCSN-2454-GR? 54 1/8 24 1/8 2 1/2 $448 $543 $624 $718 SY-FCSN-2464-GR? /8 2 1/2 $531 $644 $740 $851 SY-FCSN-2472-GR? /8 2 1/2 $597 $724 $832 $957 - Replace '?' with fabric grade when ordering. - Mobile pedestal cushions ship attached. Cushions for non-mobile cargo hubs are affixed using factory-supplied velcro. 54