Every good door installer knows the value of a well designed fastener

Size: px
Start display at page:

Download "Every good door installer knows the value of a well designed fastener"

Transcription

1 Fasteners Every good door installer knows the value of a well designed fastener system. Likewise, every good door installer has probably experienced the frustration of a poorly designed fastener system. Helton designs and selects fasteners with meticulous detail. We have a fastener selection committee made up of door installers and engineers. Every aspect of a fastener is evaluated for its installation performance. Specifications such as pitch, hardness, sharpness, strength, and head design must meet exacting specifications. The average door requires no less than 130 fasteners. That s 130 opportunities to get it right with every door installed. H-1

2 Fasteners Lags, Wood Lags, Wood (Coarse) PFSL-C14-1 1/4-10 x 1 Lag EA 0.02 PFSL-RED-C14-1 1/4-10 x 1 Lag Red Head EA 0.02 PFSL /4-10 x 1-1/2 Lag EA 0.02 PFSL /16-10 x 1-5/8 Lag (Deep Head) EA 0.04 PFSL /16-10 x 2 Lag (Deep Head) EA 0.05 PFSL-RED /16-10 x 2 Lag (Deep Head, Red) EA 0.05 PFSL /16-10 x 2-1/2 Lag (Deep Head) EA 0.05 PFSL /16-10 x 3 Lag (Deep Head) EA 0.05 PFSL-RED-C14-1 PFSL-C14-1 PFSL PFSL PFSL PFSL-RED PFSL Lags, Metal (SMS) Sheet Metal Lags PFBL Count 1/4-14 x 3/4 Sharp Point Lag EA 0.48 PFBL Count 1/4-14 x 3/4 Sharp Point Lag EA 1.13 PFBL Count 1/4-14 x 3/4 Sharp Point Lag EA 1.61 PFSL /4-14 x 3/4 Sharp Point Lag EA 0.02 PFSL-RED /4-14 x 3/4 Sharp Point Lag - Red Head EA 0.02 PFSL /4-14 x 1 Lag EA 0.02 PFSL-NS14-1 1/4-14 x 1 Lag Non-Serrated EA 0.02 PFSL PFSL-NS14-1 PFSL-14-1 H-2

3 Self-drilling (Tek) Self Drilling - TEK Screws PFBT Count 1/4-20 x 1 Tek Screw EA 1.29 PFBT Count 1/4-20 x 1 Tek Screw EA 1.71 PFST /4-20 x 1 Tek Screw EA 0.02 PFST /4-20 x 5/8 Tek Screw EA 0.02 PFST-14-1-SH 1/4-20 x 1 Tek Screw (3/8 Head) EA 0.01 PFST /16-20 x 1 Tek Screw EA 0.02 PFST-14-1 PFST Fasteners PFST Bolts Flat Head Carriage Bolts PFBB-F Count 1/4-20 x 1-7/8 Carriage Bolt - Flat Head EA 0.03 PFBB-F Count 1/4-20 x 1-7/8 Carriage Bolt - Flat Head EA 0.03 PFBB-F Count 1/4-20 x 1-7/8 Carriage Bolt - Flat Head EA 0.03 PFBB-F Count 1/4-20 x 1-7/8 Carriage Bolt - Flat Head EA 0.03 PFBB-F Count 1/4-20 x 2-1/2 Carriage Bolt - Flat Head EA 0.04 PFBB-F Count 1/4-20 x 2-1/2 Carriage Bolt - Flat Head EA 0.04 PFBB-F Count 1/4-20 x 2-1/2 Carriage Bolt - Flat Head EA 0.04 PFBB-F Count 1/4-20 x 2-1/4 Carriage Bolt - Flat Head EA 0.03 PFSB-F /4-20 x 5/8 Carriage Bolt - Flat Head (Track Bolt) EA 0.01 PFSB-F /4-20 x 1-7/8 Carriage Bolt - Flat Head EA 0.03 PFSB-F /4-20 x 2-1/4 Carriage Bolt - Flat Head EA 0.03 PFSB-F /4-20 x 2-1/2 Carriage Bolt - Flat Head EA 0.04 PFSB-F38-1 3/8-16 x 1 Carriage Bolt - Flat Head EA 0.05 PFSB-F14-58 PFSB-F PFSB-F38-1 H-3

4 Fasteners PFSB-R PFSB-R38-34 PFSB-S Round Head Carriage Bolts PFBB-R Count 1/4-20 x 2 Carriage Bolt - Round Head EA 0.60 PFBB-R Count 1/4-20 x 2 Carriage Bolt - Round Head EA 1.35 PFBB-R Count 1/4-20 x 2 Carriage Bolt - Round Head EA 1.93 PFB-X-BHB Back Hang Bolt Bag 5/16-18 x 3/4 (with nuts) EA 0.08 PFSB-R /4-20 x 5/8 Carriage Bolt - Round Head (Track Bolt) EA 0.01 PFSB-S /4-20 x 9/16 Serrated Carriage Bolt - Round Head EA 0.01 PFSB-R14-2 1/4-20 x 2 Carriage Bolt - Round Head EA 0.03 PFSB-R /4-20 x 2-1/2 Carriage Bolt - Round Head EA 0.03 PFSB-R /16-18 x 3/4 Carriage Bolt - Round Head EA 0.03 PFSB-R /8-16 x 3/4 Carriage Bolt - Round Head EA 0.04 Hex Bolts PFSB /16-18 x 1 Machine Bolt EA 0.03 PFSB /8-16 x 3/4 Machine Bolt EA 0.02 PFSB /8-16 x 1-1/2 Machine Bolt EA 0.05 PFSB PFSB Set Screws PFSS-RED /8 x 1 Square Head Set Screw EA 0.01 PFSS-RED-38-1 Nuts PFSN-14 1/4-20 Flanged Serrated Lock Nut EA 0.01 PFSN-RED-14 1/4-20 Flanged Serrated Lock Red Nut EA 0.01 PFSN-516 5/16-18 Flanged Serrated Lock Nut EA 0.01 PFSN-38 3/8-16 Flanged Serrated Lock Nut EA 0.01 PFSN-RED-38 3/8-16 Flanged Serrated Lock Red Nut EA 0.01 PFSN-RED-38 PFSN-38 H-4

5 Fastener Bags PFB-TOR-RES Residential Fastener Bag with Nylon Bearing (Torsion) EA 1.95 PFB-TOR-53 Residential / Commercial Fastener Bag with Steel Bearing (Torsion) EA 2.55 PFB-TOR-75 Commercial Fastener Bag with 2 Steel Bearings (Torsion) EA 3.50 Fasteners Torsion bags include all fasteners and parts for your garage door installation with the exception of on door fasteners. PFB-TOR-RES PFB-TOR-75 Anchors Nylon Masonry Anchors PFSA-10-MUNGO #10 Mungo Plug EA 0.02 PFSA-8-MUNGO #8 Mungo Plug EA 0.02 PFSA-10-MUNGO Steel Sleeve Masonry Anchors PFSA /16 x 1-1/2 Sleeve Anchor EA 0.02 PFSA /8 x 1-7/8 Sleeve Anchor EA 0.01 PFSA Steel Wedge Masonry Anchors PFSA /8 x 1-5/8 Wedge Anchor EA 0.01 PFSA /8 x 2-3/4 Wedge Anchor EA 0.02 PFSA H-5

6 Fasteners Cotter & Clevis Pins Clevis, Cotter and Hitch Pins FSTN-BKT-BB 1/4 x 3/4 Clevis & Cotter Bag for Bottom Bracket (2 each) EA 0.03 PFSP-CLV /4 x 3/4 Clevis Pin EA 0.03 PFSP-COT /16 x 1 Cotter Pin EA 0.01 FSTN-OMB 5/16 x 3 Clevis & Hitch Pin Bag for Operator Mounting Bracket (1 each) EA 0.25 PFSP-CLV /16 x 3 Clevis Pins Zinc Plated EA 0.06 PFSP-HIT /64 x 1-3/16 Hitch Pin Zinc Plated EA 0.01 PFSP-CLV /16 x 1 Clevis Pins (Zinc) EA 0.02 PFSP-COT /64 x 1 Cotter Pins (Zinc) EA 0.01 FSTN-BKT-BB PFSP-CLV PFSP-CLV PFSP-CLV PFSP-HIT PFSP-COT PFSP-COT H-6

7 Rivets PFSR Rivets 1/4 x 3/8 Zinc Plated M 0.01 PFSR Rivets 1/4 x 11/32 Zinc Plated M 0.01 PFSR Rivets 1/4 x 7/16 Zinc Plated M 0.01 Fasteners PFSR PFSR PFSR Screws - Miscellaneous Screws - Carriage Hardware PFSS x 1/2 SMS Stainless Steel Black EA PFSS-8-12 Screws - Window Frames PFSS x 2 SMS Pan Phillips White EA PFSS x 7/8 SMS Pan Phillips White EA PFSS x 5/8 SMS Pan Phillips White EA PFSS-8-2 PFSS-8-78 PFSS-8-58 H-7

8 H-8

Flooring Nails 6-D Flooring Nails $3.40 / 1# 6-D Flooring Nails $14.50 / 5# 8-D Flooring Nails $3.40 / 1# 8-D Flooring Nails $14.

Flooring Nails 6-D Flooring Nails $3.40 / 1# 6-D Flooring Nails $14.50 / 5# 8-D Flooring Nails $3.40 / 1# 8-D Flooring Nails $14. Nails Nails Drywall Screws Common Nails 4D Common Nails $3.85 / 1# 6D Common Nails $3.00 / 1# 6D Common Nails $74.25 / 50# 8D Common Nails $3.00 / 1# 8D Common Nails $74.25 / 50# 10D Common Nails $3.00

More information

RH-412 STEEL DOORS INSTALLATION INSTRUCTIONS

RH-412 STEEL DOORS INSTALLATION INSTRUCTIONS RH-412 STEEL DOORS INSTALLATION INSTRUCTIONS By following the steps outlined below, the assembly, installation and adjustment of the steel doors, will be a simple process. Let s start with the Driver Side.

More information

INSTALLATION INSTRUCTIONS RH 412 STEEL DOORS

INSTALLATION INSTRUCTIONS RH 412 STEEL DOORS By following the steps outlined below, the assembly, installation and adjustment of the steel doors, will be a simple process. Let s start with the Driver Side. Note: Having the hood open makes the job

More information

Hopper and Drive Components

Hopper and Drive Components January, 07 Lit. No. 7586, Rev. 00 Hopper and Drive Components Model SP-00- & SP-5- Low-Profile Tailgate Spreader Parts List This manual is for SnowEx SP-00- & SP-5- tailgate spreaders with serial numbers

More information

11 6 Round Building Assembly Instructions

11 6 Round Building Assembly Instructions 11 6 Round Building Assembly Instructions 11 6 Round Building Hardware List 1. Pro Rib Brite White 36 Wide X 68 Long (Siding Steel) 11 2. Top Wall Wheel Ring 3 3. Base Ring 3 4. 1 ½ X 68 Aluminum Tubes

More information

Track Rack. * Track Racks are not lockable

Track Rack. * Track Racks are not lockable The Track Rack s unique staggered, sliding hook design creates the greatest parking efficiency while still providing easy access to any particular bike. When adding or removing a bike to the rack, simply

More information

Sigma Fasteners, Inc. Section 7

Sigma Fasteners, Inc. Section 7 DESCRIPTION PAGE s Wedge s 7-1 Drop-In s 7-2 Single Expansion s 7-2 Machine Screw s 7-2 Lag Shields 7-3 Lead Wood Screw s 7-3 Hammer Drive s 7-4 Hollow Wall Fasteners 7-5 Toggle Bolts 7-6 Toggle Wings

More information

Hopper and Drive Components

Hopper and Drive Components February, 07 Lit. No. 770, Rev. 0 Hopper and Drive Components Model TS-00- & TS-00-EG- Low-Profile Tailgate Spreader Parts List This manual is for TurfEx TS-00- & TS-00-EG- tailgate spreaders with serial

More information

BIKE FILE (301)

BIKE FILE   (301) B IK E F I L E High Efficiency The Bike File is our most space efficient u-lock compatible product. Sturdy sliding hangers allow nine bikes to be securely stored in an eight-foot section while allowing

More information

TROLLA LEAVY 97 CM Lawn sweeper

TROLLA LEAVY 97 CM Lawn sweeper TROLLA LEAVY 97 CM Lawn sweeper Artikel nr.: 1008 EN Operating manual 014/1 Dear Customer, Congratulations on your new Trolla product. We hope you will enjoy it. Checkout with your new Trolla product may

More information

owners Model No CAUTION: Read Rules for Safe Operation and Instructions Carefully Safety Assembly Operation Maintenance Parts

owners Model No CAUTION: Read Rules for Safe Operation and Instructions Carefully Safety Assembly Operation Maintenance Parts owners manual Model No. 45-03022 SLEEVE HITCH CAUTION: Read Rules for Safe Operation and Instructions Carefully Safety Assembly Operation Maintenance Parts the fastest way to purchase parts www.speedepart.com

More information

INSTALLATION INSTRUCTIONS KK-K9-C12-K CHEVY IMPALA

INSTALLATION INSTRUCTIONS KK-K9-C12-K CHEVY IMPALA INSTALLATION INSTRUCTIONS KK-K9-C12-K 2000-2005 CHEVY IMPALA READ ALL INSTRUCTIONS PRIOR TO INSTALLATION TOOLS REQUIRED: Power Drill Drill bits1/4 and 5/32 7/l6 wrench and socket 15,18 and\or 19mm socket

More information

Fastener Solutions. USA: 866.LAWSON4U ( ) Canada: lawsonproducts.com

Fastener Solutions. USA: 866.LAWSON4U ( ) Canada: lawsonproducts.com USA: 866.LAWSON4U (866.529.7664) Canada: 800.563.1717 lawsonproducts.com Fastener Solutions 2017 Lawson Products, Inc. All rights reserved. Printed in USA. E686V3 (1/17) LAWSON'S FASTENER SOLUTIONS Tru-Torq

More information

Allow 60 from door face

Allow 60 from door face Setbacks Allow 60 from door face TOOLS NEEDED Tape Measure Marker or Pencil Masonry Drill Bit 3/8 Hammer Drill Hammer Socket Wrenches and Wrench: 9/16, 1/2, 7/16, 1/4 drive socket wrench and 1/2 socket

More information

STRUCTURAL HOLDING, F150 TOOL BOARD, AND CART ASSEMBLY

STRUCTURAL HOLDING, F150 TOOL BOARD, AND CART ASSEMBLY STRUCTURAL HOLDING, F150 TOOL BOARD, AND CART ASSEMBLY 150006 2014 Chief Automotive Technologies CO9110.1 Rev. A 12/19/14 F150 Structural Holding Tool Board Cart Step 1: Caster Assembly. A.) Assemble 5

More information

3 BRACKET TO GUIDE ATTACHMENT. RIGHT END Figure 1. EXTENDED BRACKET (for doors taller than 8-8 ) SERIES 650. RIGHT END COTTER PIN Figure 6

3 BRACKET TO GUIDE ATTACHMENT. RIGHT END Figure 1. EXTENDED BRACKET (for doors taller than 8-8 ) SERIES 650. RIGHT END COTTER PIN Figure 6 2 DOOR ARRANGEMENT. A Lay door on a clean floor inside of building and in front of opening (see Figure 1). NOTE: Door can be damaged if laid on unclean surface. B Distribute parts bags, guides, stops and

More information

Recommended Tools: Before You Begin:

Recommended Tools: Before You Begin: Recommended Tools: Before You Begin: Saftey Glasses, Tape Measure, Carpenters Level, Framing Square, Hex Head Nut Drivers, Chalk Line Elec. Drill w/ Bits (Masonry Drill, Bits. & Anchors maybe required

More information

INSTALLATION GUIDE. C20-NH STRAIGHT PARTITION Nissan NV ( Perforated Window, No Access, Steel )

INSTALLATION GUIDE. C20-NH STRAIGHT PARTITION Nissan NV ( Perforated Window, No Access, Steel ) INSTALLATION GUIDE C20-NH STRAIGHT PARTITION Nissan NV ( Perforated Window, No Access, Steel ) QUICK START GUIDE Phase 1 - Assembly q 1.1 Setup... q 1.1.1 Unpack components; compare with the bill of materials...

More information

CONTENTS TOOL LIST U P S I D E I N N O V A T I O N S, L L C RAMP AND STEP SYSTEM ASSEMBLY INSTRUCTIONS. Revised: June 2013

CONTENTS TOOL LIST U P S I D E I N N O V A T I O N S, L L C RAMP AND STEP SYSTEM ASSEMBLY INSTRUCTIONS. Revised: June 2013 U P S I D E I N N O V A T I O N S, L L C RAMP AND STEP SYSTEM ASSEMBLY INSTRUCTIONS TOOL LIST Required Tools: - Reciprocating Saw with Metal Cutting Blade - Drill - 7/16 Drill Bit for Metal Drilling -

More information

96 (Standard Length)

96 (Standard Length) Setbacks 96 (Standard Length) Bike Files may be lined up end to end to fill the available space. A 36 aisle should be left between the ends of bikes in racks facing one another. 36 aisle 50 Installation

More information

IF YOU DON T SEE IT HERE

IF YOU DON T SEE IT HERE www.smithfast.com Drills & Taps & Bits Screws Cotter Drilling Bolts / Hex Capscrews Lag Carraige Hitch Grade 8 Machine Grade Elevator 5 Sheet Spring Metal Roll Grade Eye 2 Square Taper Head set A325 Hex

More information

Onyx 90 Media Cutter. Parts Manual

Onyx 90 Media Cutter. Parts Manual Parts Manual Professional Picture Frame Equipment 441 South Whitted Street Hendersonville, NC 28739 Thank you for purchasing the Onyx 90 Media Cutter. Please read all instructions before operating your

More information

HD installation guide

HD installation guide JANUS INTERNATIONAL 1 866 562 2580 www.janusintl.c o m 1950 1950HD installation guide RIGHT DRIVE END SHOWN LH OPPOSITE LEFT TENSION END SHOWN RH OPPOSITE PUSH-UP OPERATION 1950 1950HD SHOWN A rolling

More information

INSTALLATION GUIDE. C20-DH STRAIGHT PARTITION Sprinter Partition ( Perforated Window, No Access, Steel )

INSTALLATION GUIDE. C20-DH STRAIGHT PARTITION Sprinter Partition ( Perforated Window, No Access, Steel ) INSTALLATION GUIDE C20-DH STRAIGHT PARTITION Sprinter Partition ( Perforated Window, No Access, Steel ) QUICK START GUIDE Phase 1 - Assembly q 1.1 Setup... q 1.2 Partition assembly... 3-4 5-6 Phase 2 -

More information

INSTALLATION GUIDE. C20-FTL STRAIGHT PARTITION Transit Partition ( Perforated Window, No Access, Steel )

INSTALLATION GUIDE. C20-FTL STRAIGHT PARTITION Transit Partition ( Perforated Window, No Access, Steel ) INSTALLATION GUIDE C20-FTL STRAIGHT PARTITION Transit Partition ( Perforated Window, No Access, Steel ) QUICK START GUIDE Phase 1 - Assembly q 1.1 Setup... q 1.2 Partition Assembly... 3-5 5-6 Phase 2 -

More information

TIRE RACK INSTALLATION INSTRUCTIONS Dodge Sprinter

TIRE RACK INSTALLATION INSTRUCTIONS Dodge Sprinter Aluminess Products Inc 9402 Wheatlands Ct. #A Santee, CA 92071 619-449-9930 TIRE RACK INSTALLATION INSTRUCTIONS 07-11 Dodge Sprinter Please read before beginning Stainless steel hardware may bind together

More information

Franklin Mills Stackable Movable Lateral Instructions

Franklin Mills Stackable Movable Lateral Instructions Franklin Mills Stackable Movable Lateral Instructions Table of Contents: Table of contents...1 Tools Required...2 Stationary Shelving Assembly...3-7 Mobile Shelving Assembly...8-16 Rail Assembly...8-11

More information

Tow-Behind Spreader 125 lb Capacity

Tow-Behind Spreader 125 lb Capacity Tow-Behind Spreader 125 lb Capacity IMPORTANT Read and follow all Safety Precautions and Instructions Before Operating this Equipment. Owners Manual #13696 13828 Rev. 07-149 SAFETY PRECAUTIONS 1. Always

More information

DOCK WEDGE - STANDARD

DOCK WEDGE - STANDARD DOCK WEDGE - STANDARD INSTALLATION INSTRUCTIONS WOOD HEADER READ ALL INSTRUCTIONS BEFORE INSTALLING SEAL. SUPER SEAL MFG. LTD. WILL NOT BE HELD RESPONSIBLE FOR IMPROPER INSTALLATION OF ANCHORING DEVICES,

More information

Fastener Type Chart. Fastener Categories. Sheet Metal Screws Fully threaded screws with a point for use in sheet metal. Abbreviated SMS.

Fastener Type Chart. Fastener Categories. Sheet Metal Screws Fully threaded screws with a point for use in sheet metal. Abbreviated SMS. Fastener Categories Wood Screws Machine Screws Thread Cutting Machine Screws Screws with a smooth shank and tapered point for use in wood. Abbreviated WS. Screws with threads for use with a nut or tapped

More information

INSTALLATION INSTRUCTIONS K9-C20-32 & K9-C CHEVROLET 4 DOOR TAHOE, GMC YUKON, SUBURBAN and YULON XL

INSTALLATION INSTRUCTIONS K9-C20-32 & K9-C CHEVROLET 4 DOOR TAHOE, GMC YUKON, SUBURBAN and YULON XL INSTALLATION INSTRUCTIONS K9-C20-32 & K9-C21-32 2007-2014 CHEVROLET 4 DOOR TAHOE, GMC YUKON, SUBURBAN and YULON XL TOOLS REQUIRED: Power drill Drill bit set Standard & metric socket sets Phillips screwdriver

More information

INSTALLATION GUIDE N5-DS48-4

INSTALLATION GUIDE N5-DS48-4 INSTALLATION GUIDE N5-DS48-4 Shelving ( steel ) Transit High Roof & Medium Roof Promaster Standard Roof & High Roof Nissan NV High Roof Sprinter Low Roof & High Roof Box Truck / Trailer QUICK START GUIDE

More information

installation guide

installation guide JANUS INTERNATIONAL 1 866 562 2580 w w w. j a n u s i n t l. c o m 2000 2500 3000 installation guide RIGHT DRIVE END SHOWN LH OPPOSITE LEFT TENSION END SHOWN RH OPPOSITE PUSH-UP OPERATION 2000 2500 3000

More information

Tire Chain Kit. Replacing Shear Pins. Weight Kits. Drift Cutter

Tire Chain Kit. Replacing Shear Pins. Weight Kits. Drift Cutter Replacing Shear Pins The augers are secured to the spiral shaft with two shear pins and cotter pins. If the auger should strike a foreign object or ice jam, the snow thrower is designed so that the pins

More information

INSTALLATION TORSION SPRING FRONT OR REAR MOUNT LOW HEADROOM. 1 Cutting Vertical Track. 2 Fully Adjustable Jamb Brackets

INSTALLATION TORSION SPRING FRONT OR REAR MOUNT LOW HEADROOM.  1 Cutting Vertical Track. 2 Fully Adjustable Jamb Brackets TORSION SPRING FRONT OR REAR MOUNT LOW HEADROOM Wayne Dalton, a division of Overhead Door Corporation P.O. Box 67, Mt. Hope, OH., 44660 Supplemental insert Copyright 2015 Wayne Dalton, a division of Part

More information

RYOBI 10 in. (254 mm) COMPOUND MITER SAW MODEL NO. TS1352 REPAIR SHEET

RYOBI 10 in. (254 mm) COMPOUND MITER SAW MODEL NO. TS1352 REPAIR SHEET RYOBI 0 in. (5 mm) COMPOUND MITER SAW MODEL NO. TS5 REPAIR SHEET FIGURE A 50 89 5 6 5 5 5 9 8 8 5 6 0 9 8 9 0 5 5 6 5 6 5 0 9 8 0 6 8 9 9 5 0 55 56 WARNING: Improper repair of a double insulated tool can

More information

S E R V I C E M A N U A L Replacing the Lower Gate

S E R V I C E M A N U A L Replacing the Lower Gate MANUAL HEADER S E R V I C E M A N U A L Replacing the Lower Gate J. & M. MFG. Co., Inc. P.O. Box 547 Ft. Recovery, OH 45846 PH: (419) 375-2736 www.jm-inc.com Revision 8.1.2013 Step 1 Unbolt the indicator

More information

P SERIES. and MASON CORPORATION

P SERIES. and MASON CORPORATION P SERIES CATAL ALOG Carpor ports and Patio Cover ers Corporate Office 123 Oxmoor Road West Birmingham, AL 35209 P.O. Box 59226 Birmingham, AL 35259-9226 Telephone: 1/800/868-4100 Fax: (205) 945-4304 Mason-Columbia

More information

INSTALLATION GUIDE. C20-FTM STRAIGHT PARTITION Transit Partition ( Perforated Window, No Access, Steel )

INSTALLATION GUIDE. C20-FTM STRAIGHT PARTITION Transit Partition ( Perforated Window, No Access, Steel ) INSTALLATION GUIDE C20-FTM STRAIGHT PARTITION Transit Partition ( Perforated Window, No Access, Steel ) QUICK START GUIDE Phase 1 - Assembly q 1.1 Setup... q 1.1.1 Unpack components; compare with the bill

More information

Hex Bolts - Grade 5 - Zinc - USS Threads Zinc Plated and packed in bags. 1/4 Hex Bolts and Nuts

Hex Bolts - Grade 5 - Zinc - USS Threads Zinc Plated and packed in bags. 1/4 Hex Bolts and Nuts Hex Bolts - Grade 5 - Zinc - USS Threads Zinc Plated and packed in bags. 1/4 Hex Bolts and Nuts KH1434 1/4 x 3/4 100 1.0 7245 $6.10 KH141 1/4 x 1 100 2.0 3949 $7.04 KH14112 1/4 x 1 1/2 100 2.0 5854 $8.36

More information

COUNTY OF FRESNO ADDENDUM NUMBER: ONE (1) FASTNERS, NUTS AND BOLTS. April 15, 2014

COUNTY OF FRESNO ADDENDUM NUMBER: ONE (1) FASTNERS, NUTS AND BOLTS. April 15, 2014 COUNTY OF FRESNO ADDENDUM NUMBER: ONE (1) RFQ NUMBER: 450-5260 FASTNERS, NUTS AND BOLTS April 15, 2014 PURCHASING USE ssj G:\PUBLIC\RFQ\450-5260 ADD 1.DOC IMPORTANT: SUBMIT QUOTATION IN SEALED PACKAGE

More information

INSTALLATION INSTRUCTIONS KK-K9-F14-K K9 KIT FOR FORD EXPEDITION

INSTALLATION INSTRUCTIONS KK-K9-F14-K K9 KIT FOR FORD EXPEDITION INSTALLATION INSTRUCTIONS KK-K9-F14-K-32 32 K9 KIT FOR 2003-2016 FORD EXPEDITION TOOLS REQUIRED: Power Drill Drill Bit Set Standard & Metric Socket Sets Phillips Screw Driver Open End Wrench Set Wire Cutters

More information

MANUFACTURING INC. 706 N

MANUFACTURING INC. 706 N ELSTON Gopher Getters Parts List for GA-00 & GA-00 Please Contact Us for Parts and Service: Another Quality Product of: ELSTON MANUFACTURING INC. 70 N Weber Sioux Falls, SD 70 www.elstonmfg.com -800-8-8

More information

v1.0 ASSEMBLY GUIDE Mia Wide Bookcase

v1.0 ASSEMBLY GUIDE Mia Wide Bookcase v1.0 ASSEMBLY GUIDE Mia Wide Bookcase Components Upon unpacking your bookcase from it s delivery box, you should have the pieces shown. Follow the steps on the next pages to assemble your new bookcase.

More information

Hopper and Drive Components

Hopper and Drive Components Western Products, PO Box 245038, Milwaukee, WI 53224-9538 www.westernplows.com September 1, 2015 Lit. No. 43772, Rev. 00 Hopper and Drive Components PRO-FLO 525 Low-Profile Tailgate Spreader Parts List

More information

7100 Series. Standard Lift IMPORTANT NOTICES!

7100 Series. Standard Lift IMPORTANT NOTICES! GARAGE DOORS & OPENERS 7100 Series T o r s i o n Standard Lift PO installation instructions and owner s manual T a b l e O f C o n t e n t s Parts Breakdown 2 Pre-Installation 3 Important Safety Instructions

More information

Hopper and Drive Components

Hopper and Drive Components Fisher Engineering 50 Gordon Drive, Rockland, Maine 04841-2139 www.fi sherplows.com 80152 September 1, 2015 Lit. No. 43774, Rev. 00 Hopper and Drive Components SPEED-CASTER 525 Low-Profile Tailgate Spreader

More information

Designed for flexibility... Engineered to last. CYCLE-SAFE / TWO-TIERED INSTALLATION

Designed for flexibility... Engineered to last. CYCLE-SAFE / TWO-TIERED INSTALLATION CYCLE-SAFE / TWO-TIERED INSTALLATION Designed for flexibility... Engineered to last. Two-Tiered Locker Installation Supplement to ProPark Owners Manual CYCLE-SAFE / TWO-TIERED INSTALLATION TWO-TIERED LOCKER

More information

25-200H. 12 Planer / Jointer. with Helical Cutterhead. Parts List.

25-200H. 12 Planer / Jointer. with Helical Cutterhead. Parts List. 25-200H 12 Planer / Jointer with Helical Cutterhead 4001824 Parts List www.rikontools.com CABINET ASSEMBLY PARTS EXPLOSION & PARTS LIST KEY NO. DESCRIPTION KEY NO. DESCRIPTION 1 Pan Head Screw M6x12 P25-200H-1

More information

INSTALLATION LOW HEADROOM EXTENSION. 1 Cutting Vertical Track. 2 Quick Install Jamb Brackets

INSTALLATION LOW HEADROOM EXTENSION.  1 Cutting Vertical Track. 2 Quick Install Jamb Brackets LOW HEADROOM EXTENSION P.O. Box 67, Mt. Hope, OH., 44660 Supplemental insert Copyright 2016 Wayne Dalton, a division of Part No. 333897 REV3 5/03/2016 This supplemental installation instruction is to be

More information

K/D FITTINGS & FASTENERS

K/D FITTINGS & FASTENERS K/ FITTINGS & FASTENERS -1 Screws P. 162-168 -2 Connector Bolts P. 169-173 -3 K/ Fittings P. 174-177 -4 Insert Nuts P. 178-181 -5 Allen Keys P. 182-183 -6 Nails & Wall Plugs P. 184 -1 Screws 1010 Machine

More information

Illustrated Parts List I Sleeve Hitch. (23 inch tire) ( ) Repair Parts Manual

Illustrated Parts List I Sleeve Hitch. (23 inch tire) ( ) Repair Parts Manual Illustrated Parts List 2008-01 I0807213 531 30 70-05 Sleeve Hitch (23 inch tire) (45-03021) Repair Parts Manual OWNERS MANUAL Model No. 45-03021 SLEEVE HITCH CAUTION: Read Rules for Safe Operation and

More information

Installation Instructions 3530VS/3530FVS/G2-3530VS/A3530VS HANDRAILS

Installation Instructions 3530VS/3530FVS/G2-3530VS/A3530VS HANDRAILS Important 1 1/2 [38] 1 1/2 [38] 7/16 [11] 1. Acclimate materials 24 hrs before installation. Maintain temperature controlled environment after installation 2. Install in accordance with manufacturer s

More information

Fastener Basics. Common Fastener Types. Fastener Materials. Grade / Class and Fastener Strength

Fastener Basics. Common Fastener Types. Fastener Materials. Grade / Class and Fastener Strength Fastener Basics Common Fastener Types Fastener Grade (US) or Class (metric) refers to the mechanical properties of the fastener material. Generally, a higher number indicates a stronger, more hardened

More information

Downtown Rack. Custom logo option available

Downtown Rack. Custom logo option available Custom logo option available Downtown Rack The Downtown Rack uses thick, square-tube construction that can t be cut with a pipe cutter. The extended width of the Downtown Rack makes for easy bike parking

More information

Installation Instructions 2000/2000W/G Handrail

Installation Instructions 2000/2000W/G Handrail Important 1. Acclimate materials 24 hrs before installation. Maintain temperature controlled environment after installation 2. Install in accordance with manufacturer s installation instructions. Failure

More information

Universal flat-panel mount

Universal flat-panel mount R I N S T A L L A T I O N M A N U A L Universal flat-panel mount LISTED E176225 3130 E. Miraloma Ave. Anaheim, CA 92806 Phone: 800 368-9700 Fax: 800 832-4888 www.mounts.com PREMIER MOUNTS 2004/ REV 00

More information

GlideRite Retractable Cover System For Hot Spot Spas (SE & SLX only)

GlideRite Retractable Cover System For Hot Spot Spas (SE & SLX only) List of Contents Quantity Description 12 #10 x 1 ½ Flat Head Phillips Screw (see pg. 2) 2 #10 x ½ Pan Head Phillips Screw (see pg. 2) 8 ¼ x 2 ½ Lag Bolt (see pg. 2) 7 ¼ 20 x 5 / 8 Hex Head Bolt (see pg.

More information

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS R5 STEP BOARD APPLICATION: 2009-2017 Dodge Ram 1500 Quad / Crew Cab 2010-2017 Dodge Ram 2500/3500 Crew Cab PART NUMBER: 28-51040, 28-51045, 28-51050, 28-51055 ITEM QUANTITY DESCRIPTION

More information

How To Measure Your Finished Opening

How To Measure Your Finished Opening 3000 Series Bifold Doors How To Measure Your Finished Opening MEASURE FROM RIGHT TO LEFT 2 PLACES (WIDTH) MEASURE FROM TOP TO BOTTOM 2 PLACES (HEIGHT) Tools Required for Assembly: Tools Needed: Phillips

More information

INSTALLATION GUIDE. C30-NH STRAIGHT PARTITION Nissan NV ( Swing Door, Steel )

INSTALLATION GUIDE. C30-NH STRAIGHT PARTITION Nissan NV ( Swing Door, Steel ) INSTALLATION GUIDE C30-NH STRAIGHT PARTITION Nissan NV ( Swing Door, Steel ) QUICK START GUIDE Phase 1 - Assembly q 1.1 Setup... q 1.2 Partition assembly... 3 to 4 5 to 6 Phase 2 - Installation q 2.1 Tips

More information

INSTALLATION GUIDE 3020-FTH CONTOURED PARTITION

INSTALLATION GUIDE 3020-FTH CONTOURED PARTITION INSTALLATION GUIDE 3020-FTH CONTOURED PARTITION Transit Partition ( Tempered Glass Window, Aluminum ) QUICK START GUIDE Phase 1 - Assembly q 1.1 Setup... q 1.1.1 Unpack components; compare with the bill

More information

Swerve Rack CUSTOM RACKS AVAILABLE

Swerve Rack CUSTOM RACKS AVAILABLE CUSTOM RACKS AVAILABLE Swerve Rack The design of the Swerve mirrors the bike frame, thus providing superior bike support while making it easy to secure both the bike frame and wheel with a standard u-lock.

More information

GlideRite Retractable Cover System For HotSpring & Tiger River Spas (except Classic & pre-2000 Landmark Spas)

GlideRite Retractable Cover System For HotSpring & Tiger River Spas (except Classic & pre-2000 Landmark Spas) List of Contents Quantity Description 12 #10 x 1 ½ Flat Head Phillips Screw (see pg. 2) 2 #10 x ½ Pan Head Phillips Screw (see pg. 2) 8 ¼ x 2 ½ Lag Bolt (see pg. 2) 7 ¼ 20 x 5 / 8 Hex Head Bolt (see pg.

More information

ATTACHED DOUBLE HEADER PERGOLA ASSEMBLY INSTRUCTIONS

ATTACHED DOUBLE HEADER PERGOLA ASSEMBLY INSTRUCTIONS ATTACHED DOUBLE HEADER PERGOLA ASSEMBLY INSTRUCTIONS Before You Begin: Recommended Tools: Note on Masonry Units: Note on Electric Drills: Note on Cutting and Drilling: 1) Please read all instructions and

More information

Leveling Feet, Base Plates and Casters

Leveling Feet, Base Plates and Casters Leveling Feet, Base Plates and Casters 77 Leveling Foot 1 1 Fastening to profile end Fastening in T-slot of profile For leveling tables and light equipment. Ratchet-type height adjustment requires no tools.

More information

Fastener Basics. Common Fastener Types. Fastener Materials. Grade / Class and Fastener Strength

Fastener Basics. Common Fastener Types. Fastener Materials. Grade / Class and Fastener Strength Fastener Basics Common Fastener Types Fastener Grade (US) or Class (metric) refers to the mechanical properties of the fastener material. Generally, a higher number indicates a stronger, more hardened

More information

ATTACHED SINGLE HEADER PERGOLA ASSEMBLY INSTRUCTIONS

ATTACHED SINGLE HEADER PERGOLA ASSEMBLY INSTRUCTIONS ATTACHED SINGLE HEADER PERGOLA ASSEMBLY INSTRUCTIONS Before You Begin: Recommended Tools: Note on Masonry Units: Note on Electric Drills: Note on Cutting and Drilling: 1) Please read all instructions and

More information

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS AUTOMOTIVE PRODUCTS, INSTALLATION INSTRUCTIONS ROCK SLIDERS APPLICATION: 2007-2017 Jeep Wrangler JK 2 Door PART NUMBER: 42-7005 ITEM QUANTITY DESCRIPTION TOOLS NEEDED 1,2 2 ROCK SLIDER ASSEMBLY, DRIVER

More information

INSTALLATION INSTRUCTIONS FOR FRONT CASTING DECK RAIL Ranger

INSTALLATION INSTRUCTIONS FOR FRONT CASTING DECK RAIL Ranger INSTALLATION INSTRUCTIONS FOR FRONT CASTING DECK RAIL Ranger TOOLS REQUIRED FOR INSTALLATION: Drill motor, (1) 5/16 inch drill bit, (1) 13/64 drill bit, (1) 3/16 inch hex wrench (1) 3/32 inch hex wrench.

More information

WINDLOAD POST WayneMark 8000, 8100 INSTALLATION INSTRUCTIONS

WINDLOAD POST WayneMark 8000, 8100 INSTALLATION INSTRUCTIONS WINDLOAD POST WayneMark 8000, 8100 INSTALLATION INSTRUCTIONS Wayne Dalton, a division of Overhead Door Corporation P.O. Box 67, Mt. Hope, OH 44660 www.wayne-dalton.com See garage door owner s manual for

More information

RYOBI 10 IN (254 MM) TABLE SAW MODEL NO. BT REPAIR SHEET

RYOBI 10 IN (254 MM) TABLE SAW MODEL NO. BT REPAIR SHEET RYOBI 0 IN (2 MM) TABLE SAW MODEL NO. BT00- REPAIR SHEET 2 RYOBI 0 in. (2 mm) TABLE SAW - MODEL NO. BT00- FOR MITER TABLE ASSEMBLY, REFER TO FIGURE B FOR BLADE GUARD ASSEMBLY, REFER TO FIGURE E FOR RIP

More information

AV Fastener (M) Sdn. Bhd Screw Eye Description 6.41 Square Hook(Shoulder Hook) Screw Description 6.38 One End Threaded Rod Screw Description

AV Fastener (M) Sdn. Bhd Screw Eye Description 6.41 Square Hook(Shoulder Hook) Screw Description 6.38 One End Threaded Rod Screw Description AV Fastener (M) Sdn. Bhd. 6.42 Screw Eye 6.42 Screw Eye 6.41 Square Hook(Shoulder Hook) Screw 6.41 Square Hook(Shoulder Hook) Screw 6.38 One End Threaded Rod Screw 6.38 One End Threaded Rod Screw 6.36

More information

Model Series T o r s i o n

Model Series T o r s i o n Model Series 7100 T o r s i o n Residential and Light Commercial Rear Mount Low Headroom Outside Hookup Table Of Contents Pre-Installation 2 Important Safety Instructions 2 Removing an Existing Door and

More information

REVIEW ALL INSTRUCTIONS COMPLETELY BEFORE ATTEMPTING INSTALLATION

REVIEW ALL INSTRUCTIONS COMPLETELY BEFORE ATTEMPTING INSTALLATION INSTALLATION INSTRUCTIONS Service Doors, Counter Service Doors & Grilles REVIEW ALL INSTRUCTIONS COMPLETELY BEFORE ATTEMPTING INSTALLATION GENERAL NOTES: Instructions are intended for qualified door mechanics

More information

MOTORIZED STANDARD SHADE WITH CABLES Installation Instructions

MOTORIZED STANDARD SHADE WITH CABLES Installation Instructions Tools Needed Drill Measuring Tape Pencil 2 Level Plumb Line ¼ Masonry Drill Bit Hammer Linesmans Pliers Cable Cutters Phillips & Flat-Head Screw Driver 11/32 Socket or Open End Wrench 5/32 Allen Wrench

More information

ELSTON. Gopher Getters. Parts List for GA-400 and GA-500 ELSTON MANUFACTURING INC. Please Contact Us for Parts and Service:

ELSTON. Gopher Getters. Parts List for GA-400 and GA-500 ELSTON MANUFACTURING INC. Please Contact Us for Parts and Service: ELSTON Gopher Getters Parts List for GA-00 and GA-00 Another Quality Product of: Please Contact Us for Parts and Service: ELSTON MANUFACTURING INC. 70 N Weber Sioux Falls, SD 70 www.elstonmfg.com -800-8-8

More information

TOOLS REQUIRED FOR ASSEMBLY. Rubber Mallet or Plastic Tip Hammer PARTS REQUIRED FOR ASSEMBLY OF SINGLE ENTRY STARTER.

TOOLS REQUIRED FOR ASSEMBLY. Rubber Mallet or Plastic Tip Hammer PARTS REQUIRED FOR ASSEMBLY OF SINGLE ENTRY STARTER. TOOLS REQUIRED FOR ASSEMBLY Rubber Mallet or Plastic Tip Hammer Top Cover Support PARTS REQUIRED FOR ASSEMBLY OF SINGLE ENTRY STARTER Back Stop Divider Closed 'L' Upright Slotted Reinforcement Support

More information

Flush, Models: 42, 45 and 48

Flush, Models: 42, 45 and 48 Flush, Models: 42, 45 and 48 T o r s i o n Front Mount Low Headroom MH Installation Instructions And Owner s Manual PLEASE DO NOT RETURN THIS PRODUCT TO THE STORE Please Do Not Return This Product To The

More information

M4 Hex Nut [ ] M4 T-Nut 20 [20-044] Appx. 1. 3mm. 20 Series profiles (1 per hole) (1 per hole) Ordering Information

M4 Hex Nut [ ] M4 T-Nut 20 [20-044] Appx. 1. 3mm. 20 Series profiles (1 per hole) (1 per hole) Ordering Information Handles & Light Duty PA 20 1 Assembly of Hinge M4x8 FHCS [24-208-4] M4 T-Nut 20 [20-044] M4 Hex Nut [24-706-4] 60 300-0 PA 20 on panel 2 Hinge positions 3-4 Clearance dimensions 5 Range of swing FOR M4

More information

Models 42 and 45. T o r s i o n, F r o n t M o u n t L o w H e a d r o o m, O u t s i d e H o o k - U p

Models 42 and 45. T o r s i o n, F r o n t M o u n t L o w H e a d r o o m, O u t s i d e H o o k - U p Models 42 and 45 T o r s i o n, F r o n t M o u n t L o w H e a d r o o m, O u t s i d e H o o k - U p Residential and Light Commercial Installation Instructions And Owner s Manual DEFINITION OF LIGHT

More information

At Ridgeline Fasteners Ltd.

At Ridgeline Fasteners Ltd. About Ridgeline Fasteners Ltd. At Ridgeline Fasteners Ltd. we have over twelve years experience importing, distributing, stocking and supplying fasteners to the manufacturing industry. We know how to meet

More information

V-Maxx G2 Hopper Spreader

V-Maxx G2 Hopper Spreader July 0, 0 Lit. No. 09, Rev. 0 V-Maxx G Hopper Spreader VX-00 & VX-00HO Parts List A DIVISION OF DOUGLAS DYNAMICS, LLC HOPPER ASSEMBLY 9 0 9 0 9 0 Lit. No. 09, Rev. 0 July 0, 0 Keep arms, hands, and loose

More information

Installation Instructions

Installation Instructions Important 1. Acclimate materials 24 hrs before installation. Maintain temperature controlled environment after installation 2. Install in accordance with manufacturer s installation instructions. Failure

More information

Installation Instructions

Installation Instructions EZ Launch Accessible Transfer System Installation Instructions Models 500900L, 500900R, 500901L, 500901R 500890, 500906L, 500906R For questions about features, operation/performance, parts, accessories

More information

Installation Instruction

Installation Instruction Tools Needed for Assembly Stud finder (for wood stud wall) Pencil Mark Electric drill Wood Stud Wall Installation Step 1. Locate the Wood Studs Installation Instruction Drill bit (for wood stud wall) Masonry

More information

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS SNYPER TUBULAR FENDERS APPLICATION: 2007-2017 Jeep Wrangler JK PART NUMBER: 62-1005, 62-1015 ITEM QUANTITY DESCRIPTION TOOLS NEEDED 1,2 2 FRONT FENDERS, DRIVER (1) AND PASSENGER

More information

Installation Instructions Ascend Ceiling Systems - Stainless Pan Ceilings

Installation Instructions Ascend Ceiling Systems - Stainless Pan Ceilings Ascend Ceiling Systems - Important: Install in accordance with manufacturer s installation instructions. Failure to do so will void the warranty. Recommended Tools: Socket Wrenches, Socket Set, Cordless

More information

P R I C E L I S T 13-Aug-18

P R I C E L I S T 13-Aug-18 P R I C E L I S T 13-Aug-18 6-Aug-18 Istocna radna zona blok 9/3, 22400 Ruma Phone/fax: +381 22 431 012 +381 22 479 583 +381 22 431 399 E-mail: office@rumetaltrade.com www.rumetaltrade.com CONTENT NAME

More information

Section D ACCELERATOR

Section D ACCELERATOR Section D ACCELERATOR December 2009 1D Index 1. 47-021476-001 Ball Accelerator Box 2. 11-051019-001 Hex Hd. Cap Screw (10 mm x 25 mm) 3. 11-052018-001 Flat Washer (10.5 mm) 4. 47-021249-004 Ball Cushion

More information

PARTS LIST MS 2892-D

PARTS LIST MS 2892-D PARTS LIST MS 89-D 8--00 8-0-000 KNIFE BRACE (TOP) 8--00 RIGHT KNIVE (UHMW) 8--00 LEFT KNIFE (UHMW) 8-0-00 KNIFE BRACE (UNDER) NC0-8-0 0 FLAT HEAD SOCKET CAP SCREW STAINLESS /8- X " LG NC0-9-00 0 LOCK

More information

INSTALLATION GUIDE Locker With Top Shelf Transit Low Roof & Nissan NV Low Roof ( Aluminum )

INSTALLATION GUIDE Locker With Top Shelf Transit Low Roof & Nissan NV Low Roof ( Aluminum ) INSTALLATION GUIDE 7115 Locker With Top Shelf Transit Low Roof & Nissan NV Low Roof ( Aluminum ) QUICK START GUIDE Phase 1 - Assembly q 1.1 Setup... q 1.2 Locker w/ Top Shelf Assembly... 3-5 6-13 Phase

More information

Dublin Stalls Installation Instructions

Dublin Stalls Installation Instructions Dublin Stalls Installation Instructions RAMM Horse Fencing and Stalls 13150 Airport Hwy. Swanton, OH 43558-9615 1-800-434-8456 Rev. 9/13/17 Part Identification Round Track Bracket (4) (Not Painted) Round

More information

HANDRAIL HEIGHT PER LOCAL CODE AUTHORITY

HANDRAIL HEIGHT PER LOCAL CODE AUTHORITY PLEASE READ PLEASE READ THESE INSTRUCTIONS THOROUGHLY PRIOR TO BEGINNING THE INSTALLATION! THIS INSTRUCTION SHEET IS INTENDED TO PROVIDE A SPECIFIC GUIDE TO FOLLOW FOR THE INSTALLATION OF THIS. CONTAINED

More information

ASSORTMENT INDEX PAGE 1097

ASSORTMENT INDEX PAGE 1097 ASSORTMENT INDEX Acorn Cap Nuts. 2712 Adapters, Hydraulic...2590-2591 Adhesives 2646 Allthread.. 2610 Anchors..2555, 2558, 2716 Batteries... 2513 Battery Lugs.2507, 2511 Battery Terminals.. 2510 Bolts

More information

TAPPING SCREWS 1-1 TAPPING SCREWS PHILLIPS OVAL. 1 General Fasteners HEAD ZINC BLACK SIZE SIZE CHROME CHROMATE OXIDE

TAPPING SCREWS 1-1 TAPPING SCREWS PHILLIPS OVAL. 1 General Fasteners HEAD ZINC BLACK SIZE SIZE CHROME CHROMATE OXIDE TAPPING SCREWS TAPPING SCREWS PHILLIPS OVAL HEAD ZINC BLACK SIZE SIZE CHROME CHROMATE OXIDE #4 x 3/8"... REG... 110001 #4 x 1/2"... REG... 105030... 110002 #4 x 5/8"... REG... 1 10003 #4 x 3/4"... REG...

More information

STANDARD GRAVITY BOX TARP INSTALLATION

STANDARD GRAVITY BOX TARP INSTALLATION OPERATORS MANUAL Rev. 9.9.2016 STANDARD GRAVITY BOX TARP INSTALLATION J. & M. Mfg. Co., Inc. 284 Railroad Street - P.O. Box 547 Fort Recovery, OH 45846 Ph: (419) 375-2376 Fax: (419) 375-2708 www.jm-inc.com

More information

RYOBI 10 in. (254 mm) TABLE SAW MODEL NO. BT3100 REPAIR SHEET

RYOBI 10 in. (254 mm) TABLE SAW MODEL NO. BT3100 REPAIR SHEET RYOBI 0 in. (4 mm) TABLE SAW MODEL NO. BT00 REPAIR SHEET FOR MITER TABLE ASSEMBLY, REFER TO FIGURE B FOR BLADE GUARD ASSEMBLY, REFER TO FIGURE E FOR RIP FENCE ASSEMBLY, REFER TO FIGURE C FOR MOTOR ASSEMBLY,

More information

T o r s i o n. Table Of Contents IMPORTANT NOTICES!

T o r s i o n. Table Of Contents IMPORTANT NOTICES! 9700 T o r s i o n Rear Mount Low Headroom MH Installation Instructions And Owner s Manual Table Of Contents Pre-Installation 2 Important Safety Instructions 2 Tools Required 2 Package Contents 2 Door

More information

Installation Instructions - Model V4JSD 1

Installation Instructions - Model V4JSD 1 Installation Instructions - Model V4JSD 1 Support Assemblies: Parts list: (Note see enclosed cut sheet for quantities and dimensional information) A vertical structural member (1 ½ x 1 ½ modular frame)

More information