REACH PLUS 5 Fluid Head Tripod Maintenance Manual
|
|
|
- Benjamin Hunt
- 5 years ago
- Views:
Transcription
1 REACH PLUS 5 Fluid Head Tripod Maintenance Manual Version 1 March Copyright 2013, Beijing United Victory Co., Ltd All rights reserved throughtout the world. No part of this document may be stored in a retrieval system, transmitted, copied or reproduced in any way including, but not limited to, photocopy, photograph, magnetic or other record without the prior agreement and permission in writing of Beijing United Victory Co., Ltd Secced is registered trademark of Beijing United Victory Co., Ltd. Publisher: Beijing United Victory Co., Ltd Website:
2 REACH PLUS 5 Fluid Head Illustrated Parts List - 1 -
3 Fig. 1: REACH PLUS 5 Fluid Head - 1 -
4 Item No. Part No. Nomenclature Qty. Fig. 1 SC351A-00 REACH Plus 5 Fluid Head 1 SC SC GB/T GB/T SC351A SC351A SC351A Wedge plate unit Sliding plate unit 1 Screw, pan head, pozidriv, M4x8 4 Screw, Cheese head, Slotted M4x8 1 Slide plate lock unit 1 Tilt Brake and Drag unit assembly 1 Balance Mechanism Assembly SC351A Fluid Head Logo 2 9 SC Pan Bar Unit Assembly 2 Pan unit assembly- 10 SC351A Pan Drag 1 11 SC Bowl clamp shaft 1 12 SC Bowl clamp knob 1-2 -
5 Fig.2: REACH PLUS 5 Fluid Head Wedge Plate Unit Assembly - 3 -
6 Item No. Part No. Nomenclature Qty. Fig. 2 SC Wedge Plate Unit Assembly 1 SC Non-slip plate, leather 2 2 SC Wedge plate 1 3 SC /8 Screw 2-4 -
7 Fig. 3: REACH PLUS 5 Fluid Head Sliding Plate Unit Assembly - 5 -
8 Item No. Part No. Nomenclature Qty. Fig. 3 SC Sliding Plate Unit Assembly 1 SC Slide plate 1 2 SC Wedge plate block 1 3 P-TS-4 X12 Pin, thread, slotted 4X SC Axle sleeve 1 5 SC Eccentric axle 1 6 P-SS-3 X14 Pin, spring-type, slotted, 3X SC Quick release knob Assembly 1 8 SC Washer 1 9 S-PCO-4 X8 Screw, csk head, pozidriv, 4 X S-PCO-3 X12 Screw, csk head, pozidriv, 3x SC Pressing pad 1 12 SC Spring for control pillar 1 13 SC Wedge plate control pillar 1-6 -
9 Fig.4: REACH PLUS 5 Fluid Head Slide Plate Lock Assembly - 7 -
10 Item No. Part No. Nomenclature Qty. Fig. 4 SC351A Slide Plate Lock Assembly 1 SC Pin 1 2 SC Shaft sleeve 1 3 SC Sliding clamp pad 1 4 SC351A Dovetail-formed plate 1 5 GBT70NYM4X8 Screw, cheese head, hex socket, M3x6 1 6 SC Slide plate clamp 1 7 SC Slide plate clamp shaft 1 8 W-P-6 Washer, plain, SC Slide plate clamp pad 1 8
11 Fig. 5: REACH PLUS 5 Fluid Head Tilt Brake and Drag Unit Assembly 9
12 Item No. Part No. Nomenclature Qty. Fig. 5 SC351A Tilt Brake and Drag Unit Assembly Balance mechanism 1 SC351A assembly (Fig.6) 1 2 SC Washer, plain (thick) 5 3 SC Drag disk (thin) 1 4 SC Drag disk (medium) 3 5 SC SC SC GBT Z Adjusting washer I (0.1mm) AR Adjusting washer II (0.2mm) AR Adjusting washer III (0.5mm) AR Bearing, deep groove ball 1 7 LR standard spring 4 8 SC Locating pillar I 1 9 SC Locating pillar II 1 10 SC Locating pillar III 1 11 SC Locating pillar IV 1 12 SC Tilt drag housing 1 13 GBT70NCM4x12 Screw, csk head, hex socket, M4X SC Spring sleeve 2 15 LR standard spring 2 16 SB-3 Steel ball, φ SC L.H. tilt drag knob 1 18 SC Tilt brake disk 1 19 GBT818XPM4x10 Screw, pan head, pozidriv, M4x
13 Item No. Part No. Nomenclature Qty. Fig PPD-3x8 21 SC PPD-3x6 Pin, dowel, parallel, uhd steel, A3x8 3 Screwed socket (tilt brake) 1 Pin, dowel, parallel, uhd steel, A3x SC L.H. side plate 1 24 GBT Plain key, parallel, 6X SC Steel compression ring 1 26 SC Tilt brake shaft 1 27 SC Brake knob 1 28 GBT70NYM4x8 29 GB-T Screw, cheese head, hex socket, M4X8 1 Steel wire Axle sleeve M8X1d 1 30 SC side plate cluth plate 1 31 PPD-3x8 32 GBT819NCM4x8 33 GBT70NCM10x25 Pin, dowel, parallel, uhd steel, A3X8 2 Screw, csk head, hex socket, M4X8 2 Screw, csk head, hex socket, M10X
14 Fig.6 REACH PLUS 5 Fluid Head Counterbalance Mechanism Assembly 12
15 Item No. Part No. Nomenclature Qty. Fig. 6 SC351A Counterbalance Mechanism Assembly 1 SC Main body 1 2 GBT79 M5 X8 Hexagon socket set screws with dog point M5 X8 (non use) 1 3 SC351A Stepped control Pin 3 4 SC351A Stepped control Pin Spring 3 5 SC350A Stepped control base 1 6 GBT119 A2X10 Pin, dowel, parallel, uhd steel, A2X SC351A clamping lever 3 8 GBT70NYM4x12 Screw, cheese head, hex socket,m4x SC Plain key, parallel 1 10 SC Tilt unit shaft 1 11 SC Friction bedding 9 12 SC351A Stepped control Counterbalance rubber disk 3 13 SC350A Washer 1 14 SC Counterbalance rubber disk III 1 15 SC Counterbalance locating pillar IV 1 16 LR standard spring 4 17 SC Counterbalance locating pillar III 1 18 SC Counterbalance locating pillar II 1 19 SC Counterbalance rubber disk II 1 20 SC Counterbalance rubber diski 1 13
16 Item No. Part No. Nomenclature Qty. 21 SC Counterbalance locating pillar I 1 22 SC Counterbalance rubber disk (large) 1 23 SC side plate washer 2 24 GBT Z Bearing, deep groove ball 1 25 SC Counterbalance housing 1 26 LR standard spring 1 SB-3& Steel ball, φ GBT119 A4X10 28 PPD-3x8 29 GBT70NCM4x12 Pin, dowel, parallel, uhd steel, A4X10 2 Pin, dowel, parallel, uhd steel, A3X8 5 Screw, csk head, hex socket,m4x SC Counterbalance knob 1 31 SC R.H. pressing disk 1 32 GBT819M4X8 Screw, csk head, hex socket,m4x SC R.H. side plate 1 34 GB-T Steel wire Axle sleeve M8X1d 1 35 SC Steel compression ring 1 36 GBT70NCM10x25 Screw, csk head, hex socket,m10x
17 Fig.7.1 REACH PLUS 5 Fluid Head Pan Unit Assembly -Pan Drag 15
18 Item No. Part No. Nomenclature Qty. Fig. 7 SC Pan Unit Assembly -Pan Drag Screw, cheese head, 1 S-HCH-4 X8 hex socket, M4x8 1 2 SC Brake knob 1 3 SC Pan brake shaft 1 4 LB-15x9 Level bubble, Φ15x9 1 5 SC Main Body Base 1 6 SC Power Supply 1 7 GBT PPD-3x6 9 SC Cross recessed pan head tapping screwsm2x5 2 Pin, dowel, parallel, uhd steel, A3X6 1 Screwed socket (pan brake) 1 10 SC Pan unit shaft 1 11 S-HCH-5X20 Screw, cheese head, hex socket, 4 12 GB51105 thrust ball bearing GBT70NCM4x12 Screw, cheese head, hex socket M4x SC Pan brake disk 1 15 SC Pan drag knob 1 16 SB-3 Steel ball, φ LR standard spring 2 18 PPD-3x8 Pin, dowel, parallel, uhd steela3x SC Spring housing 2 20 SC Pan drag housing 1 21 SC Locating pillariv 1 16
19 Item No. Part No. Nomenclature Qty. Fig SC Locating pillar III 1 23 SC Locating pillar II 1 24 SC Locating pillar I 1 25 LR standard spring 4 26 GBT Z Bearing, deep groove ball, Z 2 27 SC Adjusting washer I AR 28 SC Washer, plain (thick) 4 29 SC Drag disk (medium) 3 30 SC Drag disk (thin) 1 31 SC Washer, plain (thin) 1 32 SC Adjusting washeriii 1 33 SC Adjusting washeri 3 34 SC Bearing washer 2 35 SC Steel blocking ring 1 36 GBT70NCM10x25 Screw, cheese head, hex socket M10x SC Bowl base 1 38 S-HCH-5 X16 Screw, cheese head, hex socket, 6 17
20 Fig. 8 REACH PLUS 5Fluid Head Pan Bar Unit Assembly 18
21 Item No. Part No. Nomenclature Qty. Fig. 8 SC Pan Bar Unit Assembly 1 SC Pan bar screw cap 1 2 SC Pan bar locking clamp 1 3 GBT894Z8 Circlip, standardφ8 1 4 GBT97P4 Washer, plain, SC Pan bar clamp shaft 1 6 SC Pan bar clamping lever 1 7 GBT70NYM4x8 Screw, cheese head, hexagon socket,m4 X8 2 8 SC Pan bar core 1 9 SC inner pan bar rod 1 10 SC Brake ring 1 11 SC Brake knob 1 12 SC318E Mid-level Spreader brake shaft 1 13 SC Pan bar sleeve 1 14 SC outer pan bar rod 1 15 SC Pan bar grip 1 16 GB-T Rubber ring, O-sealing, 12.5X
22 SC-EFP/CF150D Tripod Leg Assembly Illustrated Parts List 20
23 Fig.1 : SC-EFP/CF150DTripod Leg Assembly 21
24 Item No. Part No. Nomenclature Qty. Fig. 1 SC360A-00 EFP Tripod Leg Assembly 1 SC360A SC360A SC SC GBT70NCM6X35 6 GBT889M6 7 GBT823PM5X12 Tripod Bowl Single leg section (Fig.2) Tripod bowl joint Leg top bracket shaft sleeve 6 Screw, csk head, hex socket,m6x35 6 tightening screw, M6 6 Screw, pan head, pozidriv, M5x
25 Fig.2: SC-EFP/CF150D Single Leg Section Assembly 23
26 Item No. Part No. Nomenclature Qty. Fig. 2 SC360A Single Leg Section Assembly 1 SC Tripod Bowl 1 2 SC Tripod Bowl shaft sleeve 2 3 SC360A Clamping knob 2 4 SC360A SC360A upper locking sleeve upper locking plate 6 SC311E Outer leg tube I 2 7 SC311E Outer leg tube II 2 8 SC360A washer 2 Screw, cheese head, hex 9 GBT701M4x8 socket, M4x SC Sliding Cube 1 11 SC Mid spreader fixing sleeve 2 12 SC318E Mid spreader fixing shaft 1 13 SC360A Lower lock plate 1 14 SC360A Lower locking sleeve 1 15 SC311E inner leg tube 2 16 SC protective housing 2 17 SC SC Feet sleeve support Feet pin 19 SC Lower locking sleeve
27 Floor Spreader Illustrate Parts List 25
28 Fig.1:Floor Spreader Illustrate Parts List 26
29 Item No. Part No. Nomenclature Qty. Fig. 1 SC318E-02 Floor Spreader 1 YSH24 2 SC318E SC GBT119 B4x40 Ring Φ24 Connecting core Spreader unit (Fig.2 ) Pin, dowel, parallel, B4x
30 Fig. 2: Floor Spreader Single Leg Assembly 28
31 Item No. Part No. Nomenclature Qty. Fig. 2 SC Floor Spreader Single Leg Assembly 1 SC Retaining strap 1 2 SC Shaft 1 3 GBT703 M5x10 Screw, csk head, hex socket, M5x SC Blocking washer 2 5 SC Spreader wheel 1 6 SC Foot base 1 7 GBT119 B4x40 Pin, dowel, parallel, B4x SC Inner leg 1 9 SC Outer leg 1 10 SC318E Clamping knob II 1 11 SC318E Clamping screw 1 29
32 Mid-level Spreader Unit Assembly Illustrated Parts List 30
33 Fig Mid-level Spreader Unit Assembly 31
34 Item No. Part No. Nomenclature Qty. Fig. 1 SC318E-01A Mid-level Spreader Unit Assembly 1 SC Clamping knob 1 2 SC Blocking Ring 1 3 SC central frame for knob 1 4 GB/T896 open-end Blocking washer SC shaft 3 6 SC318E-01-01A Mid-Level Spreader leg 3 7 SC spring 1 SB-5 Steel ball, φ5 1 8 GBT119B3x6 Pin, dowel, parallel, 3X6 3 32
35 Fig.2: Mid-level Spreader Single Leg Assembly 33
36 Item No. Part No. Nomenclature Qty. Fig. 1 SC318E-01-01A Mid-level Spreader Single Leg Assembly 1 SC Mid-level Spreader Stopper 1 2 GBT879SP4X22 Pin, spring-type, slotted, 4X SC318E Mid-level Spreader outer tube 1 4 SC318E Mid-level Spreader brake ring 1 5 SC318E Mid-level Spreader brake shaft 1 6 SC Brake knob 1 7 GBT70.1 M4X8 Screw, cheese head, hex socket, M4x8 1 8 SC318E Mid-level Spreader inner tube 1 9 SC318E A Mid-level Spreader shaft 1 10 GBT70.1 M4X12 Screw, cheese head, hex socket, M4X SC318E locating washer 1 12 SC318E Mid-level Spreader knob 1 13 SC318E A Mid-level Spreader Connecting core 1 34
REACH PLUS 1 Fluid Head Tripod Maintenance Manual
REACH PLUS 1 Fluid Head Tripod Maintenance Manual Version 1 March.15.2013 Copyright 2013, Beijing United Victory Co., Ltd All rights reserved throughtout the world. No part of this document may be stored
Parts Catalog Collector 34 Model Battery
Parts Catalog Table of Contents Side broom cpl. part 1 (97104618-1 6404-20)... 4 Side broom cpl. part 2 (97104618-2)... 6 Frame - Wheels (97104566)... 8 Covering B (97104855)... 10 Travel drive, part 1
Parts Catalog Admiral 28 Cylindrical Scrubber
Parts Catalog Table of Contents Front bounce protection (97116834)... 4 Wheel suspension (97103725)... 6 Chassis (97115422)... 8 (97114763)... 10 Steering (97073738)... 12 Seat bracket (97118616)... 14
RYOBI. 10 in. (254 mm) TABLE SAW MODEL NO. BTS15 REPAIR SHEET
RYOBI 0 in. ( mm) TABLE SAW MODEL NO. BTS REPAIR SHEET FIGURE A 0 0 0 0 The model number will be found on a plate attached to the motor housing. Always mention the model number in all correspondence regarding
Parts Catalog Collector 34 Model Gasoline
Parts Catalog Table of Contents Side broom cpl. part 1 (97104618-1 6404-10)... 4 Side broom cpl. part 2 (97104618-2)... 6 Frame - Wheels (97104566)... 8 Covering V (97104640)... 10 Travel drive, part 1
20" WOODTURNING LATHE Model 3520A
20" WOODTURNING LATHE Model 3520A Instruction Manual & Parts List M-0460221 (800) 248-0144 www.powermatic.com SPECIFICATIONS: 3520A Lathe Table with standard extensions... 28 x 38 Distance Between Centers...
EXCERPT FROM THE Jobsite saw OWNERS MANUAL
Table and Fence Table and Fence Parts List 0 0 0 0 0 0 0 0 Table JSS-00 Fence Roller Pin (mm x mm) JSS-0 Rear Lock Down Screw for Insert JSS-00 0 mm O-Ring JSS-00 Extension Wing JSS-00 Fence Roller Wheel
3000, 4000, 4100, 7500, 7700
3000, 4000, 4100, 7500, 7700 Drum & Disc Brake Lathes s Identification READ these instructions before placing unit in service. KEEP these and other materials delivered with the unit in a binder near the
Parts Catalog. S-Series Slicer Smart Manual SG13. Model:
, 07 99507 ECN 065 Parts Catalog S-Series Slicer Smart Manual Model: SG SG 0/0/07 Rev. G IMPORTANT! TO EXPEDITE SHIPMENT OF PARTS, ALWAYS SPECIFY MODEL, REV, PART NUMBER, AND SERIAL NUMBER OF UNIT. GLOBE
Parts Catalog. S-Series Slicer Manual Frozen Option S13. Model:
, 07 995 ECN 08 Parts Catalog S S-Series Slicer Manual Frozen Option Model: S 05/0/07 Rev. G IMPORTANT! TO EXPEDITE SHIPMENT OF PARTS, ALWAYS SPECIFY MODEL, REV, PART NUMBER, AND SERIAL NUMBER OF UNIT.
2705 03-09 99 98 97 82 88 89 83 84 85 86 87 101 103 100 106 81 71 105 104 73 74 75 76 77 78 80 79 57 62 58 56 63 65 66 67 68 64 69 70 59 60 61 31 30 29 32 34 35 41 40 42 36 37 38 39 43 4445 46 33 55 54
Operating Instructions and Parts Manual. 10 x 16 Horizontal Band Saw Models J-7020, J-7040
Operating Instructions and Parts Manual 10 x 16 Horizontal Band Saw Models J-7020, J-7040 JET 427 New Sanford Road LaVergne, Tennessee 37086 Part No. M-414472 Ph.: 800-274-6848 Revision C2 03/2014 www.jettools.com
SpareParts Book Rev. 2.0
SpareParts Book Rev. 2.0 Macchina GB Sezione 1 GB_part1 1 GB/T 70.3 2000 Hexagon head screw M10 60 2 2,1 G.FMH150.S 023 Pulley cover weldment 150 1 2,2 G.FMH180.S 023 Pulley cover weldment 180 1 3,1 SPB
Model LS1018 Parts List A = Standard Equipment 〇 = Circuit Diagram
LS1018 7-14 103 104 105 106 97 99 100 110 109 63 85 96 200 107 90 2 199 108 37 89 91 92 93 94 31 74 75 73 140 70 121 15 254 255 113 215 236 116 114 115 196 258 195 118 197 119 259 117 203 253 67 95 112
PARTS LIST. Clarke CL500M 6 spd. Metal Lathe Part Number: HT HT HT
PARTS LIST Clarke CL500M 6 spd. Metal Lathe Part Number: - 7610300 Quantity Description Part Number 1 Countersunk Hd, screw m5x14 HT3000101 1 Retaining Ring, 28 HT3000102 1 Bevel Gear HT3000103 1 Washer
CATALOG OF REPLACEMENT PARTS
The Choice of Experience CATALOG OF REPLACEMENT PARTS MODELS 909A 919A 909E 919E 909M 919M SLICERS EFFECTIVE MARCH 2009 - 2 - Table of Contents 5 ELECTRICAL COMPONENTS (909A & 919A) 7 ELECTRICAL COMPONENTS
Tire Chain Kit. Replacing Shear Pins. Weight Kits. Drift Cutter
Replacing Shear Pins The augers are secured to the spiral shaft with two shear pins and cotter pins. If the auger should strike a foreign object or ice jam, the snow thrower is designed so that the pins
TS4001. Model # 10 inch Table Saw addendum SETUP & OPERATION MANUAL
SETUP & OPERATION MANUAL Features Powerful 13 amp motor Cast aluminum work table Riving knife Anti-kickback pawls Includes: 10 in. 24 tooth tungsten carbide tipped saw blade Rip fence Miter gauge Push
Main Breakdown. Model G0531B/G0566B V2 (G0531B) 80V2-2
Main Breakdown 53 85-1 54 59 54 56 54 52 55 57 175 53 56 85 29 119-2 114 89 22 119-2 119 107 119-5 119-3 119-6 119-1 29 22 119-4 114 112 96 113 114 100 116 117 105 120 102 103 108 115 99 98 92 91 90 73
MODEL RA-2500N RADIAL ARM SAW
1 6130089 HEX. NUT (L.H.T.) W5/8"-18UNF 2.18 2 6900549 WASHER 1.78 3 6080529 ARBOR COLLAR 31.02 4 6760117 OILLESS METAL 1.57 5 9270612 CLAMP SCREW M6 X 12 0.19 6 9220625 HEX. SOCKET HEAD BOLT M6 X 25 0.22
LISTA DE REFACCION MODELO LS1018L PAGINA 1. Pos. NUMERO DESCRIPCION Cant. NOTA
PAGINA 1 001 JM23100006 CROSS HEAD SCREW M5X20 2 002 JM23100007 FLAT WASHER 5 2 003 JM23100008 PAD 4 004 JM23100009 LOCKNUT M10 1 005 JM23100010 FLAT WASHER 10 2 006 JM23100300 BASE COMPLETE 1 INC. 7 007
ASTRO. FF-14NW and FF-14NEW Friction Feeder. Parts Manual
ASTRO FF-14NW and FF-14NEW Friction Feeder Parts Manual This manual is intended solely for the use and information of Astro Machine Corp., its designated agents, customers, and their employees. The information
SPARE PARTS LIST MODEL NO. LB1200F PAGE 1 ITEM PART NO. DESCRIPTION QTY NOTE
PAGE 1 001 JM21000018 HEX.SOCKET HEAD SCREW M5X12 4 002 JM21000019 SPRING WASHER 5 4 003 JM21000020 FLAT WASHER 5 4 004 JM21000021 UP COVER COMPLETE 1 005 JM21000025 MICRO SWITCH FIX PANEL A 1 006 JM21000026
IIHS Side Impact Outrigger
IIHS Side Impact Outrigger Assembly Procedure Base Assembly (14.3 lbs) The base assembly consists of a ¼ thick steel plate, a ¼ thick piece of polyethylene, and mounting fixtures for the upper and lower
Compass 20 Fluid Head
Cat No: 1036 Serial No: C31219 - Miller Camera Support Equipment ACN 000 923 464 30 Hotham Parade Artarmon, Sydney, NSW 2064 Australia Tel. +61 2 9439 6377 Fax +61 2 9438 2819 millertripods.com sales@miller.com.au
3000, 4000, 4100, 7500, 7700 Drum & Disc Brake Lathes
3000, 4000, 4100, 7500, 7700 Drum & Disc Brake Lathes Model 4000 Shown Parts Identification READ these instructions before placing unit in service. KEEP these and other materials delivered with the unit
EXPLODED PARTS LIST VSS 60
Page(s): / ENGINE Page(s): / No Code Name Qty No Code Name Qty 05083 Handle assembly 05076 Connecting rod 3 Box Hex locking nut M8 7 5 Washer 8xx 6 Hex locking nut M6 7 T bolot M8x 8 Pin with hole 9 0506
Copyright 2005 Valmont Industries, Inc.
Hose Drag TOPIVIEW OF CART Universal 1 Left Guidance Support (4" H.D.) 1732080... Left Guidance Sumort.. 16". H.D.)... 1732138 2 Right Guidance Support (4" H.D.)... 1732081 Right Guidance Support (6" H.D.)...
Diesel Pile Hammer D30-32 Part # 66508
Diesel Pile Hammer D30-32 Part # 66508 2 Diesel Pile Hammer D30-32 Part # 66508 Pos Order No Pg Description Qty 66508 Diesel Pile Hammer D30-32 cmpl 1 1 108742 4 Cylinder Lower Part cmpl 1 2 60151 Inner
MODEL T28173/T28174 ROLLER TABLES INSTRUCTIONS
MODEL T28173/T28174 ROLLER TABLES INSTRUCTIONS FOR MODELS MFD. SINCE 10/17 For questions or help with this product contact Tech Support at (570) 546-9663 or techsupport@grizzly.com Rails Rollers Reversible
3000, 4000, 4100, 7500, 7700
3000, 4000, 4100, 7500, 7700 Drum & Disc Brake Lathes Model 4000 Shown s Identification READ these instructions before placing unit in service. KEEP these and other materials delivered with the unit in
Onyx 90 Media Cutter. Parts Manual
Parts Manual Professional Picture Frame Equipment 441 South Whitted Street Hendersonville, NC 28739 Thank you for purchasing the Onyx 90 Media Cutter. Please read all instructions before operating your
Disc, Belt, and Combination Disc/Belt Sanders
This Manual is Bookmarked Operating Instructions Parts Manual Disc, Belt, and Combination Disc/Belt Sanders Models: 4200A, 4300A, 4400A 4200A Disc/Belt Sander 4300A 6 Inch Belt Sander 4400A 12 Inch Disc
LISTA DE REFACCION MODELO LS1017L PAGINA 1. Pos. NUMERO DESCRIPCION Cant. NOTA
PAGINA 1 001 JM23100006 CROSS HEAD SCREW M5X20 2 002 JM23100007 FLAT WASHER 5 2 003 JM23100008 PAD 4 004 JM23100009 LOCKNUT M10 1 005 JM23100010 FLAT WASHER 10 2 006 JM23100300 BASE COMPLETE 1 INC. 7 007
Parts Catalog MIXERS
Parts Catalog MIXERS MODEL: SP60 & SPC60 SP60 0-2-2 IMPORTANT! TO EXPEDITE SHIPMENT OF PARTS, ALWAYS SPECIFY MODEL, REV, PART NUMBER, AND SERIAL NUMBER OF MIXER. GLOBE FOOD EQUIPMENT COMPANY 225 East River
Horizontal Band Saw. Operating Instructions and Parts Manual. Models EHB-1018VM EHB-1018VMH
Operating Instructions and Parts Manual Horizontal Band Saw Models EHB-08VM EHB-08VMH JET 427 New Sanford Road LaVergne, Tennessee 37086 www.jettools.com Ph.: 855-336-4032 Part No. M-89070 REV B2 08/204
25-200H. 12 Planer / Jointer. with Helical Cutterhead. Parts List.
25-200H 12 Planer / Jointer with Helical Cutterhead 4001824 Parts List www.rikontools.com CABINET ASSEMBLY PARTS EXPLOSION & PARTS LIST KEY NO. DESCRIPTION KEY NO. DESCRIPTION 1 Pan Head Screw M6x12 P25-200H-1
SERVICE PARTS LIST PAGE 1 OF 6 BASE ASSEMBLY SPECIFY CATALOG NO. AND SERIAL NO. WHEN ORDERING PARTS 12" SLIDING COMPOUND MITER SAW
PAGE 1 OF 6 BASE ASSEMBLY 00 0 CATALOG NO. EXAMPLE: SPECIFY CATALOG NO. AND NO. WHEN ORDERING PARTS 6955-20 1 02-80-0050 Thrust Bearing (1) 2 05-80-0510 M5 x 12mm Flat Head T-20 Screw (5) 3 05-81-0135
Diesel Hammer Model D19-42 Part #
Diesel Hammer Model D19-42 Part # 120491 2 Diesel Pile Hammer Part # 120941 Pos Order No. Pg Description Qty 120941 Diesel Pile Hammer D19-42 (Bauer MNR:426514) 1 160198 4 Cylinder Lower Part cmpl 1 2
LY5005/ LY5007/
LY5005/3300-000-010 LY5007/3300-000-020 Operation/Maintenance Manual For Parts or Technical Assistance 800-327-0770 Table of Contents Style LY5005 & LY5007/3300-000-010 & 3300-00-020 2-3 Drive Rod Assembly
EEBR312A Brake Lathes Parts Identification
EEBR312A Brake Lathes s Identification READ these instructions before placing unit in service. KEEP these and other materials delivered with the unit in a binder near the machine for ease of reference
SECTION 9: PARTS. Main Breakdown -36- Model G5394 (Mfd. Since 11/08)
SECTION 9: PARTS Main Breakdown 105 137 136 113-1 113 141 140 113-2 113-3 111 113-4 114 135 143 144 101 121-1 -1 116 147-1 121-2 115 120 121 107 108 164 162 160 158 138 109 127 126 160 158 123 127 123
Electronic Service Manuals
Electronic Service Manuals This electronic document is provided as a service to our customers. We do not create the contents of the information contained in this document. Should you have detailed questions
Parts Catalog MIXERS
Parts Catalog MIXERS MODELS: SP20 & SPC20 SP20 0--2 IMPORTANT! TO EXPEDITE SHIPMENT OF PARTS, ALWAYS SPECIFY MODEL, REV, PART NUMBER, AND SERIAL NUMBER OF MIXER. GLOBE FOOD EQUIPMENT COMPANY 225 East River
RYOBI 10 in. TABLE SAW MODEL NO. BTS16 REPAIR SHEET
RYOBI 0 in. TABLE SAW MODEL NO. BTS REPAIR SHEET FIGURE A FIGURE E FIGURE H FIGURE C FIGURE D 0 0 FIGURE B 0 0 NOTE A WARNING: Improper electrical repair of the table saw can result in damage to the drive
CONCRETE SAW PARTS LIST
CONCRETE SAW PARTS LIST MODEL CCXL-EE December 01 Part # 1 Intentionally Blank Table of Contents Description Page No. Frame Assembly... Carriage Assembly Motor Assembly.... Blade Shaft Assembly... Spring
MODEL D DIESEL PILE HAMMER
AMERICAN PILEDRIVING EQUIPMENT, INC. MODEL D125-42 DIESEL PILE HAMMER SPARE PARTS BOOK Corporate Office 7032 S. 196th Street Kent, WA, USA 98032 Tel: 1-800-248-8498 Tel: 1-253-872-0141 Fax: 1-253-872-8710
EMS-2025scl 230v. Sliding Compound Mitre Saw Fig.1. Revision Date 26/01/2006
Fig.1 Fig.2 701 inc 2,702,703,704 1 Base 93 089100102700 Space washer Base Assembly Parts (A) 30.23 94 Screw, for base, 45 152 Miter scale label, 2 089100102002 Rubber feet 0.10 702 Pivot Shaft & Screw
MS25 OPERATION MANUAL
SAFETY INSTRUCTIONS SPECIFICATIONS OPERATING INSTRUCTIONS MAINTENANCE ADJUSTMENTS REPLACEMENT OF PARTS MS25 DIAGRAM MS25 PARTS LIST MS25 OPERATION MANUAL SAFETY INSTRUCTIONS Please read these instructions
MODEL NO.: MI / 42100
MODEL NO.: MI-50 / 00 MODEL NO.: MI-50 BOX 1 OF 6 ROUTER LIFT PARTS BREAKDOWN Router Lift Assembly 6 5 2 2 1 5 5 8 12 11 2 26 27 0 12 26 27 27 22 22 27 19 A 5 26 12 26 22 25 25 7 18 18 15 15 7 9 1 17 2
Main Drive Components
Pipe and Bolt Threading Machine Main Drive Components 0 0 Rear Centering Head Centering Jaw Set Spiral Pins () 00 Centering Scroll Retaining Ring 0 Rear Bearing 0 Oil Ball Valve () # - x / Screw Motor
Headstock Assembly 31
Headstock Assembly 31 Parts List: Headstock Assembly Index No. Part No. Description Size Qty 1... 6294736...Faceplate...3... 1 2... 6295796...Nyloc Insert Socket Set Screw...1/4-20x3/8... 4 3... 6294725...Spur
SPARE PARTS LIST MODEL NO PAGE 1 ITEM PART NO. DESCRIPTION QTY NOTE
PAGE 1 001 342186-7 SWITCH PROTECTOR 1 002 911118-1 PAN HEAD SCREW M4X12 6 003 155512-9 SWITCH PLATE 1 004 651757-2 SWITCH ABK266 1 006 685712-2 SPONGE SHEET 60X60 1 007 911118-1 PAN HEAD SCREW M4X12 1
Model LS0815F Parts List A = Standard Equipment 〇 = Circuit Diagram
LS0815F 4-14 1 3 4 6 32 7 47 48 42 44 41 43 11 10 16 14 15 8 9 24 20 19 22 17 21 18 13 23 27 26 29 33 31 35 34 36 86 87 89 90 93 105 104 107 108 109 110 111 101 100 63 83 84 69 67 65 72 79 80 81 85 77
535A. Main Components. Pipe and Bolt Threading Machine. Printed in U.S.A. Ridge Tool Company/Elyria, Ohio, U.S.A.
Pipe and Bolt Threading Machine A Main Components 0 Screw, Button Head /" - 0 x /" () Washer, Flat /" ()" Top Cover 0 Base Bottom Cover Screw, Pan Head # - x " () Carriage Assembly 0 Front Support Bar
PARTS LIST CHARGER 2716 DB
PARTS LIST CHARGER 2716 DB 1 ITEM PART NO. DESCRIPTION QTY. 101 6495381 LEFT OUTER BEARING / PIVOT MOUNT 1 102 9121450 5/16-18 HEX NUT WITH NY-LOK INSERT - PACK OF 5 4 103 9121210 1/4-20 X 5/8 HEX BOLT
LAKSHMI MACHINE WORKS LIMITED COIMBATORE , INDIA
Spare Parts Catalogue for Vario Clean LB9/2 Issue No. : 02 Month / Year : February 2016 Control No. : 63 194 10 00 Revision Date : Spinning System This Catalogue Belongs to the Mill : Order No. : Machine
Number Wheeler P/N Description Set Rex P/N Notes Base 1 J Support, Right 1 J Support, Left 1 J Nut (M8)
1 603500 Base 1 J001 2 603501 Support, Right 1 J002 3 603502 Support, Left 1 J003 4 600328 Nut (M8) 4 5 600130 Spring Washer (8mm) 4 6 600344 Roll Pin (M6x30) 4 7 600129 Socket Hd Cap Screw (M8x25) 4 8
MODEL RA-200N RADIAL ARM SAW
ITEM NO PART NO DESCRIPTION PRICE 1 6130089 HEX. NUT (L.H.T.) W5/8"-18UNF 2.18 2 6900079 CONICAL SPRING 16.3 X 31.5 X 1.2 0.78 3 6940444 OUTER FLANGE 4.49 4 6940443 INNER FLANGE 4.91 5 6100509 PARALLEL
Parts Catalog. S-Series Slicer Smart Manual SG13. Model:
, 08 99507 ECN 065 Parts Catalog S-Series Slicer Smart Manual Model: SG SG /6/08 Rev. R IMPORTANT! TO EXPEDITE SHIPMENT OF PARTS, ALWAYS SPECIFY MODEL, REV, PART NUMBER, AND SERIAL NUMBER OF UNIT. GLOBE
TROLLA LEAVY 97 CM Lawn sweeper
TROLLA LEAVY 97 CM Lawn sweeper Artikel nr.: 1008 EN Operating manual 014/1 Dear Customer, Congratulations on your new Trolla product. We hope you will enjoy it. Checkout with your new Trolla product may
Parts Catalog MIXERS
Parts Catalog MIXERS MODELS: SP0 & SPC0 SP0-3-2 IMPORTANT! TO EXPEDITE SHIPMENT OF PARTS, ALWAYS SPECIFY MODEL, REV, PART NUMBER, AND SERIAL NUMBER OF MIXER. GLOBE FOOD EQUIPMENT COMPANY 225 East River
LS2-B891 LT2-B892 LS2-B891-05, LT2-B892-05
LS2-B891 LT2-B892 Single Needle Unison Feed Lock Stitcher Single Needle Unison Feed Lock Stitcher with Thread Trimmer Twin Needle Unison Feed Lock Stitcher Twin Needle Unison Feed Lock Stitcher with Thread
Exploded View Saw Base - Model 7060 Semi-Automatic Cut-Off Band Saw
Exploded View Saw Base - Model 7060 Semi-Automatic Cut-Off Band Saw 136 137 135 134 132 131 133 113 114 115 117 116 118 119 120 121 79 78 77 107 108 65 76 110 109 66 10 9 6 11 5 4 8 7 75 74 73 72 111 112
321357T 400/50/3 PARTS LIST ERSATZTEILLISTE LISTE DE PIECES
GHB-1340A METALWORKING LATHE 321357T 400/50/3 PARTS LIST ERSATZTEILLISTE LISTE DE PIECES WMH Tool Group AG Bahnstrasse 24, CH 8603 Schwerzenbach www.wmhtoolgroup.ch; info@wmhtoolgroup.ch Tel +41 (0) 44
SERVICE PARTS LIST PAGE 1 OF 6 BASE ASSEMBLY SPECIFY CATALOG NO. AND SERIAL NO. WHEN ORDERING PARTS 12" DUAL BEVEL COMPOUND MITER SAW B27B
PAGE 1 OF 6 BASE ASSEMBLY 00 0 EXAMPLE: Component Parts (Small #) Are Included When Ordering The Assembly (Large #). SPECIFY CATALOG NO. AND NO. WHEN ORDERING PARTS = Part number change from previous service
SECTION 9: PARTS Main
SECTION 9: PARTS Main 58 63 67 66 65 67 66 59 58 49 58 48 49 61A 61 64 62 55 50 35-3 34 35-1 57 56 41 42 151 51 50 33A 35-2 30A 30A-1 35 38 39 31 32 18 40 43 44 68 51 41 45 46 57 56 55 47 152 153 20 21
Operating Instructions and Parts Manual 5-ft. Radial Arm Drill Press Models J-1600R, J-1600R-4
Operating Instructions and Parts Manual 5-ft. Radial Arm Drill Press Models J-1600R, J-1600R-4 JET 427 New Sanford Road LaVergne, Tennessee 37086 Part No. M-320038 Ph.: 800-274-6848 Revision H 01/2016
Walk-Behind Broadcast Spreader
January 1, 2019 Lit. No. 83679, Rev. 01 Walk-Behind Broadcast Spreader SP-8 & SP-8SS Parts List This document is for SnowEx SP-8 walk-behind broadcast spreaders beginning with serial numbers PD-288 and
red rooster REV. TCR500 / TCR 1000 Link Plate 2TE Air Trolley (2TE/AT/4) DESCRIPTION Air Hoist PART NUMBER DRG TCR 1000 DRG
ITEM QTY PART NUMBER DRG 5- TCR DRG 5- DESCRIPTION TE Air Trolley (TE/AT/) Air TCR5 / TCR Link Plate TE and Trolley 6/6/ - 6kg Title of project Material Weight REV. Designed by Checked by Approved by B.
RYOBI 10 IN (254 MM) TABLE SAW MODEL NO. BT REPAIR SHEET
RYOBI 0 IN (2 MM) TABLE SAW MODEL NO. BT00- REPAIR SHEET 2 RYOBI 0 in. (2 mm) TABLE SAW - MODEL NO. BT00- FOR MITER TABLE ASSEMBLY, REFER TO FIGURE B FOR BLADE GUARD ASSEMBLY, REFER TO FIGURE E FOR RIP
Leveling Feet, Base Plates and Casters
Leveling Feet, Base Plates and Casters 77 Leveling Foot 1 1 Fastening to profile end Fastening in T-slot of profile For leveling tables and light equipment. Ratchet-type height adjustment requires no tools.
Parts List: VBS-3612 Band Saw
Parts List: VBS-3612 Band Saw (refer to breakdowns on pages 35 and 36) Index No. Part No. Description Size Qty 1... VBS3612-101...Gear Box... 1 2... TS-0209101...Socket Head Cap Screw...3/8-16 x 2-1/4...
3850, Drum & Disc Brake Lathes. Parts Identification
3850, 3860 Drum & Disc Brake Lathes Parts Identification READ these instructions before placing unit in service. KEEP these and other materials delivered with the unit in a binder near the machine for
Signature. Date. Surname. 30 max.
ITEM QTY PART NUMBER DRG - DRG - DRG - DRG 9- TCR DESCRIPTION Trolley Low Headroom Frame TCR / TCR Link Plate Spacer Air Hoist Title of project Date Material Weight Designed by Approved by Surname Date
Coolant Tank Screen Leg Idle End Lockwasher 64 B-015B Leg Drive End Machine Screw 1/4-20 x 3/4 Round Head
Always give model number, serial number and part number when ordering repair parts. BED, COOLANT & DASH POT PARTS LIST (Cont'd.) REF NO. PART NUMBER DESCRIPTION 19 B-077 Vise Slide Block 20 B-045 Vise
PARTS LIST COMMANDER 20 VAC-TRAC COMMANDER 27 VAC-TRAC FH 541V
PARTS LIST COMMANDER 20 VAC-TRAC COMMANDER 27 VAC-TRAC FH 541V UPPER ASSEMBLY 101 6190481 THROTTLE CABLE FOR MODELS WITH ADDITIONAL CHOKE CABLE 1 101 6190751 THROTTLE CABLE FOR MODELS WITH OUT ADDITIONAL
Operation and Maintenance Instructions Geared Head Bench Lathe Models GHB-1340A, GHB-1440A
Operation and Maintenance Instructions Geared Head Bench Lathe Models GHB-1340A, GHB-1440A (GHB-1340A shown with optional stand 321443AK) For Parts List and Electrical Diagrams, see document M-321357A
-en. Belt Drive Walk Behind Commercial Mower 32" 36" s:: ~ en ~ AHA~~ COMPANY! www. BradleyMowers.com
Belt Drive Walk Behind Commercial Mower 32" 36" 0 ~ z m ;c - en s:: )> z c )> r ~ ~ ~ en r -en -1 1 www. BradleyMowers.com ~ AHA~~ COMPANY! Bradley Mowers Belt Drive Parts 33 Frame Assembly 34 Frame Assembly
RYOBI 10 in. TABLE SAW - MODEL NO. BT3000
FOR MITER TABLE ASSEMBLY, REFER TO FIGURE 0 RYOBI 0 in. TABLE SAW - MODEL NO. BT000 FIGURE 5: 0 in. TABLE SAW FOR BLADE GUARD ASSEMBLY, REFER TO FIGURE FOR RIP FENCE ASSEMBLY, REFER TO FIGURE FOR MOTOR
OWNERS MANUAL MODEL F660 HIP SLED
OWNERS MANUAL MODEL F HIP SLED QUESTION? As a quality home gym supplier we are committed to your complete satisfaction. If you have questions, or find missing or damaged parts, we will guarantee your complete
CATALOG OF REPLACEMENT PARTS
CATALOG OF REPLACEMENT PARTS FMS20 MIXER WITH ATTACHMENT HUB ML-134387 ML-134388 WITHOUT ATTACHMENT HUB ML-134398 ML-134399 FORM 43166 (September 2016) F-43166 (September 2016) - 2-2016 Table of Contents
CATALOG OF REPLACEMENT PARTS
CATALOG OF REPLACEMENT PARTS HL400 SERIES LEGACY MIXER ML-134348 ML-134359 ML-141096 HL400 HL400C HL400 (Canada) A product of HOBART 701 S. RIDGE AVENUE TROY, OHIO 45374-0001 FORM 43137 Rev. A (May 2016)
RYOBI 10 in. (254 mm) TABLE SAW MODEL NO. BT3100 REPAIR SHEET
RYOBI 0 in. (4 mm) TABLE SAW MODEL NO. BT00 REPAIR SHEET FOR MITER TABLE ASSEMBLY, REFER TO FIGURE B FOR BLADE GUARD ASSEMBLY, REFER TO FIGURE E FOR RIP FENCE ASSEMBLY, REFER TO FIGURE C FOR MOTOR ASSEMBLY,
CATALOG OF REPLACEMENT PARTS
CATALOG OF REPLACEMENT PARTS MODEL X13 SERIES SLICER FORM 43180 Rev. A (April 2013) F-43180 Rev. A (April 2013) - 2-2013 Table of Contents 5 ELECTRICAL COMPONENTS 7 RING GUARD AND CENTER PLATE 9 ARM ASSEMBLY
CATALOG OF REPLACEMENT PARTS
CATALOG OF REPLACEMENT PARTS FMS30 MIXER ML-134462 ML-134463 FORM 43181 Rev. A (April 2014) F-43181 Rev. A (April 2014) - 2-2014 Table of Contents 5 CONTROL PANEL 7 ELECTRICAL COMPONENTS 9 ATTACHMENT HUB
LEG CURL IP-S1315 INSTALLATION INSTRUCTIONS
LEG CURL IP-S35 INSTALLATION INSTRUCTIONS Copyright 2009. Star Trac by Unisen, Inc. All rights reserved, including those to reproduce this book or parts thereof in any form without first obtaining written
Model No: TC10. Parts Information: Tyre Changer - Automatic
Page 1 of 11 1 TC10.01 BODY 2 TC10.02 COLUMN 3 TC10.03 HORIZONTAL ARM ASS'Y 4 TC10.04 WASHER 5 TC10.05 RUBBER FOOT 6 TC10.06 COVER 7 TC10.07 SCREW M14x42 8 TC10.08 PRESS COVER 9 TC10.09 STOP-UP 10 TC10.10
Note: Parts without part numbers are for reference only and cannot be purchased individually.
Parts Ordering Replacement Parts To order parts or reach our service department, call 1-800-274-6848 Monday through Friday (see our website for business hours, www.waltermeier.com). Having the Model Number
1822-I. Spindle Assembly. Pipe and Bolt Threading Machine. Ridge Tool Company/Elyria, Ohio, U.S.A. 2* 3 4 5* * *
-I Pipe and Bolt Threading Machine Spindle Assembly * * * 0 * * * 0 * * 0* * * Rear Cover * Screw () * Washer () Top Cover w/clips (Includes,, ) * J Clip () Front Cover * Screw () Pivot Rod Support ()
Section A December 2009
Section A ELEVATOR December 2009 1A Index 1. 47-011053-004 Deflection Chain Gear w/bearing Complete 2. 11-051772-001 Lockwasher (12 mm) 3. 47-011130-004 Bearing Bolt 4. 47-011245-003 Lower Chain Guide
Star Trac Turbo Trainer Assembly & Setup
Star Trac Turbo Trainer Use the following procedures to unpack and assemble your Turbo Trainer manufactured by Star Trac. UNPACKING AND PARTS LIST Position the shipping carton so the Heavy End logo is
HEADSTOCK (CASTNG & CONTROLS)
HEADSTOCK (CASTNG & CONTROLS) REF.NO. PART NO. DESCRIPTION Q'TY 1 VE2101 HEADSTOCK CASTING 1 2 VE2134 HEADSTOCK COVER 1 3 VE2116 SHAFT 1 4 VE2117 GEAR 1 5 VE2118 WASHER 1 6 VE2119 SHAFT 1 7 VE2120 GEAR
Model PLM5113N PETROL LAWN MOWER
Strana 1 / 2 Strana 2 / 2 Strana 1 / 4 001 671006065 "BLADE TIGHTEN BOLT 3/8""24" 1 002 671010730 LID SHAPE WASHER 1 003 DA00000973 BLADE 510MM 1 004 671015252 BLADE SUPPORT 1 005 DA00000535 FLAT KEY 1
INSTRUCTION MANUAL LEG PRESS OPTION OF ELITE GYM
INSTRUCTION MANUAL LEG PRESS OPTION OF ELITE GYM QUESTION? As a quality home gym supplier we are committed to your complete satisfaction. If you have questions, or find missing or damaged parts, we will
JARVIS. Model BR-3 Blade Reconditioner ... EQUIPMENT TABLE OF
- Model BR-3 Blade Reconditioner EQUIPMENT SELECTION.......... Ordering No. TABLE OF CONTENTS............................ Page Model BR-3 (100 mm Blade) 115V/60Hz............ 4011003 220V/50Hz............
GEAR HEAD METAL LATHE
GEAR HEAD METAL LATHE MODEL G4002 / G4003 PARTS LIST COPYRIGHT 2000 BY GRIZZLY INDUSTRIAL, INC. WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE OR FORM WITHOUT THE WRITTEN APPROVAL OF
Side Winder R o u t e r L i f t.
Woodpeckers PRECISION WOODWORKING TOOLS Side Winder R o u t e r L i f t. INSTALLATION INSTRUCTIONS The wrench handle must be pointing left in order to fully insert or remove it. Lift Wrench Once fully
Click Here to Go Back
Click Here to Go Back Fig. -94 Fig. -97 CC42D 10. Remove the cap screw securing the gear shift stopper plate pin retainer; then remove the retainer. Fig. -95 CC45D 12. Remove the link arm and account for
CATALOG OF REPLACEMENT PARTS
CATALOG OF REPLACEMENT PARTS HCM450 PIZZA CUTTER/MIXER ML-141055 ML-141058 ML-141144 PRIOR ML COVERED IN THIS MANUAL ML-136226 A product of HOBART 701 S. RIDGE AVENUE TROY, OHIO 45374-0001 FORM 43221 Rev.