RECTANGULAR FLEXIBLE WAVEGUIDE SPECIFICATIONS
|
|
|
- Arnold Greer
- 5 years ago
- Views:
Transcription
1 1425 Highland Avenue (Rt. 10) P.O. Box 728 Cheshire, CT U.S.A. Phone # Fax # E - mail: Sales@microtech - inc.com Visit our Web site: - inc.com EIA WR SIZE RECTANGULAR FLEXIBLE WAVEGUIDE SPECIFICATIONS TYPICAL ELECTRICAL SPECIFICATIONS FREQUENCY RANGE (GHz) MCKS Flexible Non-Twistable MTPS Flexible Twistable MSBS Seamless (Brass) *VSWR **INSERTION LOSS *VSWR **INSERTION LOSS *VSWR **INSERTION LOSS SEE "MILLIMETER FLEX" DATA SHEET N/A N/A N/A N/A NA NA N/A N/A * VSWR is per 2 Foot Section ** INSERTION LOSS is in db per Foot with Silver Plated waveguide TYPICAL MECHANICAL SPECIFICATIONS POWER HANDLING CAPABILITY Bend Radii to Centerline EIA WR CW Power In Watts With Jacket Without Jacket PEAK Power In SIZE E - Plane H - Plane E - Plane H - Plane MCK/MSB MTP Kilowatts , , ,000 1, ,000 1, ,000 1, ,000 2, ,000 2,500 1, ,500 3,000 1, ,000 4,000 1, ,000 4,000 2, ,000 8,000 3, ,000 10,000 4, ,000 NA 10,700 Mechanical Specifications are for Non-Twistable Flexible Waveguide. Tighter Radii can be accommodated with Seamless Flexible Waveguide. See other Data Sheets for Double-Ridged and Millimeter Flexible Waveguide. DATA001.DOC Rev B
2 1425 Highland Avenue (Rt. 10) P.O. Box 728 Cheshire, CT U.S.A. Phone # Fax # E - mail: Sales@microtech - inc.com Visit our Web site: - inc.com ORDERING INFORMATION EXAMPLE - FLEXIBLE WAVEGUIDE ASSEMBLY MTPS284CHN120BS is a straight WR284 Flexible/Twistable waveguide assembly with silver-plated flex, choke to plate flange combination, with a molded neoprene jacket, 120 inches long with brass flanges silver plated. EXAMPLE - RIGID WAVEGUIDE ASSEMBLY MRH112CHP144A is a straight WR112 rigid waveguide assembly, with choke and plate flanges, painted, length of 144 inches, with aluminum flanges, chromate finish. EXAMPLE - RIGID WAVEGUIDE BEND ASSEMBLY Bends are specified by placing the Degree of the bend and the Plane (E or H) in the fourth grouping of letters. Leg symmetry is specified in the last grouping. For bend assemblies with uneven leg symmetry and flange combinations, flange type on each leg must be specified on the order. MRC 62 HH 90E 12 x 6BS is a WR62 rigid waveguide bend assembly, OFHC copper, plate to plate flange combination, 90 degree E-plane bend with a leg symmetry of 12 inches center-line to flange face by 6 inches center-line to flange face, with brass flanges, silver plated. Flange type on each leg shall be specified on order. EXAMPLE - RIGID WAVEGUIDE TWIST Twists are specified by placing the Degree of twist, the letter "T", and the Direction of the twist (CW = clockwise, CCW = counter-clockwise) in the fourth grouping of letters. Overall length is specified in the last grouping of letters. MRF137GG 45TCW 6B is a straight WR137 rigid waveguide assembly, commercial bronze, CPRG flanges at both ends, 45 degree twist in the clockwise direction, 6 inches long, with brass flanges. Chromate finish. SEE FOLLOWING PAGES FOR DETAIL ORDERING *****If you have any special request when ordering any of Microtech s product s. Please contact the factory and we will be happy to help you. DATA-017A
3 EXAMPLE:FLEX-WAVEGUIDE ASSEMBLY MTPS284CHN12BT Is a WR284 Flex/Twist waveguide assy. with silver-plated flex, choke/plate flange, molded neoprene jacket, 12 in. long,brass flange,tin finish MTPS 284 CH N 12 BT FLANGE PLATING Waveguide Type S- SILVER N- NICKEL R- RHODIUM C- CADMIUM FLEXIBLE T- TIN MTPS-FLEXIBLE/TWISTABLE WAVEGUIDE Non plated flanges will be Chromated MCKS-FLEX/NON-TWISTABLE SIZE JACKET MSB-SEAMLESS FLEXIBLE- BRASS 284 N - NEOPRENE FLANGE MATERIAL MSD-SEAMLESS FLEXIBLE-BERYLLIUM COPPER S - SILICONE A - ALUMINUM MTES-EXTRA FLEXIBLE/TWISTABLE-BRASS V - VINYL (8802) B - BRASS MSN SEAMLESS ELECTROFORMED B - BRUSH-ON SILICONE MSP SEAMLESS-PHOSPHOR BRONZE A - UNJACKETED LENGTH P - PAINT (SPECIFY) 12 INCHES S- Following waveguide type Designates Silver Plate LETTER FLANGES RIGID C CHOKE (STANDARD TAPPED HOLES) MRH-ALUMINUM 6061 D CHOKE (CLEAR HOLES) MRA-ALUMINUM 1100 E CMR ( ALT. CLEAR/TAP) MRC-OFHC COPPER F CPRF ( STANDARD CLEAR HOLES) MRF-COMMERCIAL BRONZE G CPRG ( STANDARD CLEAR HOLES) MRT-COIN SILVER H PLATE (STANDARD CLEAR HOLES) J PLATE ( GASKET GROOVE ONLY) CLEAR HOLES Rigid assemblies are not jacketed. K PLATE ( GASKET GROOVE ONLY) TAPPED HOLES All Alum/Bronze & OFHC receive Chromate coating L PLATE (TAPPED HOLES) M CBR (CLEAR HOLES) W PBR (CLEAR HOLES) U UBR (CLEAR HOLES) T CDR (CLEAR HOLES) Y PDR (CLEAR HOLES) ORDERING PAGE 1 R UDR (CLEAR HOLES) Z SPECIAL (CUSTOMER TO SPECIFY) FOR DOUBLE RIDGED SEE PAGE 3 * Other flanges available upon request DATA017B OCTOBER 21, 2003
4 EXAMPLE; RIGID/TWIST-WAVEGUIDE ASSEMBLY MRHC137FG45TC96BC Is a WR137 Rigid waveguide assy. with a CPRF/CPRG flanges with a 45 degree Twist Clockwise, 96 in. long,with brass flanges, Cadmium Plate MRC 137 FG 45 TC 96 BC Waveguide Type FLANGE PLATING S-SILVER N - NICKEL FLEXIBLE R-RHODIUM C - CADMIUM MTPS-FLEXIBLE/TWISTABLE WAVEGUIDE T-TIN MCKS-FLEX/NON-TWISTABLE SIZE Non plated flanges will be Chromated MSB-SEAMLESS FLEXIBLE- BRASS 137 TWIST MSD-SEAMLESS FLEXIBLE-BERYLLIUM COPPER 45 Degree FLANGE MATERIAL MTES-EXTRA FLEXIBLE/TWISTABLE-BRASS A - ALUMINUM MSN SEAMLESS ELECTROFORMED B - BRASS MSP SEAMLESS-PHOSPHOR BRONZE DIRECTION TC- Twist Clockwise LENGTH TCC- Twist Counterclockwise 96 Inches S- Following waveguide type Designates Silver Plate LETTER FLANGES RIGID C CHOKE (STANDARD TAPPED HOLES) MRH-ALUMINUM 6061 D CHOKE (CLEAR HOLES) MRA-ALUMINUM 1100 E CMR ( ALT. CLEAR/TAP) MRC-OFHC COPPER F CPRF ( STANDARD CLEAR HOLES) MRF-COMMERCIAL BRONZE G CPRG ( STANDARD CLEAR HOLES) MRT-COIN SILVER H PLATE (STANDARD CLEAR HOLES) J K PLATE ( GASKET GROOVE ONLY) CLEAR HOLES PLATE ( GASKET GROOVE ONLY) TAPPED HOLES All Alum/Bronze & OFHC receive Chromate coating L PLATE (TAPPED HOLES) M CBR (CLEAR HOLES) W PBR (CLEAR HOLES) U UBR (CLEAR HOLES) T CDR (CLEAR HOLES) Y PDR (CLEAR HOLES) R UDR (CLEAR HOLES) Z SPECIAL (CUSTOMER TO SPECIFY) * Other flanges available upon request ORDERING PAGE 2 DATA017C OCTOBER 21, 2003
5 EXAMPLE-DOUBLE RIDGED FLEX ASSEMBLY MFPS750AEN12BS Is a WRD750 Flex/Twist assembly. with silver-plated flex,gasket/plate flanges molded neoprene jacket, 12 in.long, with brass flanges plated Silver. DOUBLE RIDGED ASSEMBLIES MFPS 750 AE N 12 BS FLANGE PLATING S-SILVER N - NICKEL R-RHODIUM C-CADMIUM Waveguide Type T-TIN WAVEGUIDE Non plated flanges will be Chromated DOUBLE RIDGED FLEXIBLE SIZE JACKET MFPS-DOUBLE RIDGED-FLEX/TWIST-BRASS 750 N - NEOPRENE FLANGE MATERIAL MDK - DOUBLE RIDGED-NON/TWIST-BRASS S - SILICONE A - ALUMINUM MDB - DOUBLE RIDGED-SEAMLESS-BRASS V - VINYL (8802) B - BRASS MDD-DOUBLE RIDGED-SEAMLESS-BERYLLIUM COPPER B - BRUSH-ON SILICONE S- Following waveguide type Designates Silver Plate A - UNJACKETED LENGTH P - PAINT (SPECIFY) 12 INCHES DOUBLE RIDGED WAVEGUIDE LETTER FLANGES A GASKET (ALL TAPPED HOLES) MPA-ALUMINUM DOUBLE RIDGED B GASKET (ALL CLEAR HOLES) MPF-BRONZE-DOUBLE RIDGED C GASKET (ALTERNATE TAP/CLEAR) D PLATE ( ALL TAPPED HOLES) All Alum/Bronze & OFHC receive Chromate coating E PLATE ( ALL CLEAR HOLES) All Double Ridged Rigid assemblies are not jacketed F PLATE ( ALTERNATE TAP/CLEAR) ORDERING PAGE 3 * Other flanges available upon request DATA017D OCTOBER 21, 2003
Rectangular Waveguide Attenuation
Attenuation Rectangular Waveguide Attenuation in English and Metric Units Waveguide Frequency Loss, Loss, Size GHz db/100-ft. db/100m Waveguide Frequency Loss, Loss, Size GHz db/100-ft. db/100m WR-229
FlexTwist. Waveguide components
FlexTwist Waveguide components FlexTwist waveguide components The value of a waveguide solution is in its performance and its precision. Your waveguide is a critical link in point-to-point and point-to-multipoint
Andrew Solutions. FlexTwist. Waveguide Components
Andrew Solutions FlexTwist Waveguide Components FlexTwist Waveguide Components What is the value of low-loss, high-performance waveguide? In a word: inestimable. Your waveguide is a critical link in point-to-point
2016 Passive Components Product Catalogue
2016 Passive Components Product Catalogue REV Company Introduction is a privately owned and operated company with our head of- Unique Broadband Systems has been in business since 1990 as Unique Broadband
MICROWAVE ENGINEERING CORPORATION FLEXIBLE WAVEGUIDE & CUSTOM W/G ASSEMBLIES TABLE OF CONTENTS
FLEXIBLE WAVEGUIDE & CUSTOM W/G ASSEMBLIES TABLE OF CONTENTS No. B002d SERIES PAGE FLEXIBLE WAVEGUIDE & CUSTOM W/G ASSEMBLIES NO. Flexible Waveguide, Seamless, Twistable 170FT, 170S T21E 4-1 Rectangular
Sma W/G Coax Adapters WG Size Freq (GHz) Model No.* Drawing WR A Dwg WR A Dwg WR
Waveguide to Coax, Right Angle Adapters, See Also: Adapters, W/G to Coax, Endlaunch Adapters, W/G to W/G ATM manufactures Waveguide to Coax Adapters covering a full frequency range for Rectangular Waveguides
Waveguide Attenuators
Attenuators Fixed Attenuators / FA SERIES Variable Attenuators / VA SERIES The Solution offers a range of Low Power Fixed and Infinitely Variable Attenuators as well as the range of Laboratory Standard
Waveguide Attenuators
Attenuators Fixed Attenuators Variable Attenuators FA SERIES VA SERIES The Solution offers a range of Low Power Fixed and Infinitely Variable Attenuators as well as the range of Laboratory Standard Precision
Phase Shifters and Attenuators. Waveguide Terminations. Power Dividers/Combiners. Flexible Cables. Waveguide Products. Standard Gain Horns
Abbreviated Catalog Phase Shifters and Attenuators Waveguide Terminations Power Dividers/Combiners Flexible Cables Waveguide Products Standard Gain Horns For a wide variety of VARIABE ATTENUATORS 1 2.50
Section 13. Waveguide Adapters & Transformers. Introduction
Section Waveguide Adapters & Transformers Introduction The line of waveguide adapters presented in this catalog represents over 50 years of experience in the mechanical and electrical design of waveguide
Dinesh Micro Waves & Electronics
Wave Guide Components RECTANGULAR WAVE GUDES Dinesh Microwaves and Electronics manufacturers of high power waveguide in the microwaves industry, this experience had resulted in designing, manufacturing
FEATURES. Maximizer Gold ~ Larger solid SPC center conductor than standard solid PTFE semi-rigid cables
MAXIMIZER HIGH PERFORMANCE SEMI-RIGID Extend your system s performance with Storm s MAXIMIZER line of cable products. For the most demanding applications, phase stable low loss Maximizer Gold products
FEATURES. Maximizer Gold. Larger solid SPC center conductor than standard solid PTFE semi-rigid cables. Maximizer Silver
MAXIMIZER HIGH PERFORMANCE SEMI-RIGID Extend your system s performance with Storm s MAXIMIZER line of cable products. For the most demanding applications, phase stable low loss Maximizer Gold products
DETAIL SPECIFICATION SHEET
INCH-POUND MIL-DTL-24308/40 1 April 2015 DETAIL SPECIFICATION SHEET CONNECTORS, ELECTRIC, RECTANGULAR, MINIATURE, COMBINATION INSERT ARRANGEMENT, PLUG, SOCKET CONTACTS, SHELL SIZE 5, SIZE 20 SIGNAL CONTACTS
DETAIL SPECIFICATION SHEET
INCH-POUND MIL-DTL-24308/33 1 April 2015 DETAIL SPECIFICATION SHEET CONNECTORS, ELECTRIC, RECTANGULAR, MINIATURE, COMBINATION INSERT ARRANGEMENT, PLUG, PIN CONTACTS, SHELL SIZE 3, SIZE 20 SIGNAL CONTACTS
Waveguide Switches3.5 to 40GHz Split Band. Rectangular Waveguide, Coaxial, Dual Waveguide and Coaxial
Waveguide and coaxial switches are used control signal routing; They facilitate redundancy by switching from units with problem to a hot standby back up system in under 80 milliseconds DPDT Latching E
DETAIL SPECIFICATION SHEET
INCH-POUND MIL-DTL-24308/30 1 April 2015 DETAIL SPECIFICATION SHEET CONNECTORS, ELECTRIC, RECTANGULAR, MINIATURE, COMBINATION INSERT ARRANGEMENT, RECEPTACLE, SOCKET CONTACTS, SHELL SIZE 1, SIZE 20 SIGNAL
CSP-03G-003 High-Frequency Coaxial Test & Measurement Probe Model Number: CSP-03G-003, Replacement Probe: SPL-03G-043, SPL-03B-121 Target Connector: CPT-03-50-2 Applications: Designed for use in interconnect
SECTION 7 R114 / R115 / R116 / R117 / R112
SECTION 7 7 smb / SMB-LOCK / SMC R114 / R115 / R116 / R117 / R112 Contents SMB Introduction... 7-4 to 7-5 Interface... 7-6 Characteristics... 7-7 to 7-8 Plugs... 7-8 to 7-9 Jacks...7-9 to 7-10 Bulkhead
086 Model Series. 50Ω DC to 18 GHz. The Big Deal
HAND Coaxial TM Cable 50Ω DC to 18 GHz 086 Model Series The Big Deal Hand Formable Tight Bend Radius Excellent Return Loss and Insertion Loss Ideal for interconnect of assembled systems CASE STYLE: KP1505-XX
SMA - 50 Ohm Connectors
For Flexible Cable Straight Crimp Type Plug - Captivated Contact CABLE TYPE RG-178/U, 196 1.20 +.025 f (GHz) 0-12.4 GHz 142-0402-001 142-0402-006 RG-161/U, 174,188, 316 RG-188 DS, RG-316 DS RG-58/U, 141,
RF Connectors Technical Data Sheet. Gold over Nickel Plated Beryllium Copper Contact. Size in [11.81 mm] . Weight lbs [3.18 g].
![RF Connectors Technical Data Sheet. Gold over Nickel Plated Beryllium Copper Contact. Size in [11.81 mm] . Weight lbs [3.18 g].](/thumbs/90/101629325.jpg "RF Connectors Technical Data Sheet. Gold over Nickel Plated Beryllium Copper Contact. Size in [11.81 mm] . Weight lbs [3.18 g].")
RP SMA Male Connector Solder Attachment for PE-SR402AL, PE-SR402FL, PE-SR402FLJ, PE- SR402TN, RG402, Gold Plated Brass Body RF Connectors Technical Data Sheet PE44724 Configuration SMA Male Reverse Polarity
SECTION 14. DIN 1.0/2.3 / DIN 1.6/5.6 / Type 43 R118 / R120 / R129 / R214
SECTION 14 14 DIN 1.0/2.3 / DIN 1.6/5.6 / Type 43 R118 / R120 / R129 / R214 Contents DIN 1.0/2.3 Introduction... 14-4 Interface... 14-4 Characteristics Eco... 14-5 Plugs Eco... 14-6 Jacks Eco... 14-6
N Male Connector Clamp/Solder Attachment for RG17, RG218, RG219
N Male Connector Clamp/Solder Attachment for RG17, RG218, RG219 RF Connectors Technical Data Sheet PE4433 Configuration N Male Connector MIL-STD-348 50 Ohms Features Silver Plated Contact Applications
141 SMNB Model Series
HAND Coaxial TM Cable 50Ω DC to 12.5 GHz 141 SMNB Model Series The Big Deal N-Type (F) Bulkhead Connector to SMA (M) Hand Formable Tight Bend-Radius (8mm min.) Ideal for interconnect of assembled systems
ReversePolarity Series(SMA,BNC,TNC)
RP ReversePolarity Series(SMA,BNC,TNC) Description Reverse polarity BNC, TNC, N & SMA connectors (RP-BNC, RP-TNC, RP-SMA) are designed for uses in wireless applications where a non-standard interface has
MIL-C-17 Standard RF Coaxial Cable Low Loss & Ultra Low Loss RF Microwave Cable ANTENNA & TEST Cable up to 26.5 GHz
MIL-C-17 Standard RF Coaxial Cable Low Loss & Ultra Low Loss RF Microwave Cable ANTENNA & TEST Cable up to 26.5 GHz Low Loss Low Density PTFE Dielectric RF Microwave Coaxial Cable Silver Plated Copper
Kabelwerk Eupen AG 1
Kabelwerk Eupen AG 1 The foundation of the cable factory KABELWERK EUPEN AG as manufacturer of electrical cables goes back to the beginning of last century. Today the company has a staff of 950 people
Kabelwerk Eupen AG 1
Kabelwerk Eupen AG 1 The foundation of the cable factory KABELWERK EUPEN AG as manufacturer of electrical cables goes back to the beginning of this century. Today the company has a staff of 950 people
Millimeter-Wave Technology & Solutions
SERIES JFD FERR IITE C IIRCULATORS & IISOLATORS FEATURES: High isolation Low insertion loss Compact, lightweight APPLIC ATION S: Assemblies and subsystems Amplifiers and oscillators Duplexer in transceivers
RF Connectors Technical Data Sheet. Description Minimum Typical Maximum Units. Frequency Range DC 3 GHz VSWR 1.25:1 Operating Voltage (AC) 335 Vrms.
BNC Male Connector Crimp/Crimp Attachment for 100 inch, RG316, RG174, RG188, LMR-100, LMR- 100, LMR-100-FR, PE-C100, PE-B100 RF Connectors Technical Data Sheet PE45045 Configuration BNC Male Connector
Introduction. Attenuators
Introduction Attenuators Features Lead Free, RoHS Compliant Option Available Substrates - BeO, AlN or Alumina Power Rating -.05 to 400 Watts Frequency Range DC to 6 GHz Package styles: chip, tab & cover,
Microwave Components and Assemblies P A S Q U A L I
Microwave Components and Assemblies P A S Q U A L I m i c r o w a v e s y s t e m s 01 GRUPPO PASQUALI IS: P A S Q U A L I m i c r o w a v e s y s t e m s Microwave components manufacturing and mechanical
ATM Space Quality Products
ATM Space Quality Products 1 Advanced Technical Materials, Inc Who We Are - Where We Are Microwave Components to 60GHz Founded 1990, Privately Owned Patchogue, Long Island, New York, USA Owned Modern Buildings
MCX. Aliner Industries, Inc. No. 32, Lane 387, Min-an Rd., Sinjhuang City, Taipei County 24256, Taiwan
MCX Aliner Industries, Inc. No. 32, Lane 387, Min-an Rd., Sinjhuang City, Taipei County 24256, Taiwan Tel : +886-2-2205-5791 E-mail : sales@aliner.com.tw Fax : +886-2-2203-8052 / 2205-5628 http://www.aliner.com.tw
SMB Connectors. RF Coax Connectors. Product Facts
SMB Connectors Product Facts SMB offers snap-fit coupling for quick connect/disconnect Choice of Commercial or High Rel Connectors 50 and 75 Ω MIL-Type connectors available Straight plugs and jacks are
STANDARD MICROWAVE COMBINER MODEL SMC-XX-X-HP-X
SMC-XX-X-HP Standard Microwave Combiner STANDARD MICROWAVE COMBINER MODEL SMC-XX-X-HP-X Installation Manual Please read the manual completely and carefully before installation. Instructions are intended
Amphenol RF. Mini-BNC Mini-BNC Connectors. Mini-BNC. Description. Features/Benefits. Applications
Amphenol RF 100 Connectors Description Amphenol RF introduces the new generation of quality BNC connectors for the telecommunication and broadband applications for higher connector densities while preserving
SRICOM SRINAR COMMUNICATIONS PVT. LTD.
B A L U N SRICOM & D D F A S S E M B LY SRINAR COMMUNICATIONS PVT. LTD. S R I N A R C O M M U N I C A T I O N S P V T. L T D, called SRICOM in short, is located at Chennai in the southern part of India.
RESISTIVE POWER SPLITTERS AND DIVIDERS
RESISTIVE POWER SPLITTERS AND DIVIDERS DC 40.0 GHz S Resistive Power Splitters Usage: : Use in RF and wireless applications where one of the two outputs are included in a leveling loop or used as a reference
Classic Exposed Tee System (24" x 24", 24" x 48", and 24" x 72") Floating Clouds and Perimeter Wall Attachment
Ceiling Systems SERPENTINA Classic Exposed Tee System (24" x 24", 24" x 48", and 24" x 72") Floating Clouds and Perimeter Wall Attachment Installation Instructions The 3-Dimensional Ceiling System consists
Gordon Riblet. President s Message
MDLCatalog_v2:MDL inside sec 1-17v5 3/24/15 10:13 AM Page 2 President s Message In choosing a company to design and manufacture your standard or complex waveguide components, there are only three criteria:
RP TNC Male Connector Crimp/Solder Attachment for PE-C240, RG8X, inch, LMR-240, LMR-240-DB, LMR-240-UF, B7808A
RP TNC Male Connector Crimp/Solder Attachment for PE-C240, RG8X, 0240 inch, LMR-240, LMR-240-DB, LMR-240-UF, B7808A RF Connectors Technical Data Sheet PE44670 Configuration TNC Male Reverse Polarity Connector
STANDARD COAXIAL CONNECTORS. Eco 7/16 series
STANDARD COAXIAL CONNECTORS Eco 7/16 series Eco 7/16 INTRODUCTION GENERAL Standard coaxial connectors Screw on coupling Compliant to CECC and IEC standards 50 Ω APPLICATIONS Broadcast RF components (filters,
Ford Water Meter Couplings & Accessories
Section H 2/2001 Ford Water Meter Couplings & Accessories The Ford Meter Box Co., Inc. 775 Manchester Avenue, P.O. Box 443, Wabash, Indiana, USA 46992-0443 Telephone: 260/563-3171 FAX: 1-800-826-3487 Overseas
MICROWAVE WAVEGUIDES and COAXIAL CABLE
MICROWAVE WAVEGUIDES and COAXIAL CABLE In general, a waveguide consists of a hollow metallic tube of arbitrary cross section uniform in extent in the direction of propagation. Common waveguide shapes are
Microwave Development Laboratories
Microwave Development Laboratories COMPONENTS CATALOG The future of waveguide component technology President s Message In choosing a company to design and manufacture your standard or complex waveguide
SAGE Millimeter, Inc.
Description: Model SAF-2434233-328-S1-28-DP is a dual polarized, WR-28 scalar feed horn antenna assembly that covers several popular G bands in the frequency range of 24 to 42 GHz. The antenna features
Microwave Components and Assemblies
Microwave Components and Assemblies P A S Q U A L I m i c r o w a v e s y s t e m s TM USA m i c r o w a v e 01 P A S Q U A L I m i c r o w a v e s y s t e m s TM USA m i c r o w a v e GRUPPO PASQUALI
DAGE Corporation is the Exclusive Export Management Company for all MDL Products and Value-Added Services.
Microwave Development Labs of Needham Heights, Massachusetts is the world s leading manufacturer of waveguide components and subassemblies in the microwave industry. DAGE Corporation is the Exclusive Export
7/16 DIN Male Connector Crimp/Solder Attachment for RG214, RG9, RG225, RG393
7/16 DIN Male Connector Crimp/Solder Attachment for RG214, RG9, RG225, RG393 RF Connectors Technical Data Sheet PE4571 Configuration 7/16 DIN Male Connector IEC 169-4 50 Ohms Straight Body Geometry Features
TNC SERIES General... 4 Interface... 5 Characteristics...6-7
CONTENTS PAGE TNC SERIES General... 4 Interface... 5 Characteristics...6-7 TNC 50 Ω SERIES Plugs...8-9 Jacks...0- Jacks and receptacles... Receptacles...-4 Adapters... 5 Caps... 6 TNC 75 Ω SERIES Plugs...
STORM FLEX 0 4 7, 0 8 6, & S E R I E S
0 4 7, 0 8 6, & 1 4 1 S E R I E S 047 & 086 Miniature Assemblies F E A T U R E S B E N E F I T S With 0.055" and 0.096" (1.40 mm and 2.44 mm) diameters, durable construction, and low profiles in configuration,
Broadband performance with low reflection DC to 4 GHz provides low cost connector combined with high quality.
Amphenol RF 36 Connectors Description The name derives from SubMiniature B (the second subminiature design). Developed in the 1960 s, this sub miniature interface has snap-on coupling. Amphenol s connectors
SMA 50 Ohm Connectors Alphabetical Index INCHES (MILLIMETERS) CUSTOMER DRAWINGS AVAILABLE ON REQUEST
SMA 50 Ohm Connectors Alphabetical Index SMA Connectors - 50 Ohm Bulkhead Mount... 20 Custom Feedthroughs... 48 Dummy Loads... 37 End Launch... 16 Field Replaceable... 28 Flexible Cable... 8 In-Series
EACON. Field mountable microwave cable. INEXIM Sp. z o.o. Edition Bezpośredni importer i dystrybutor
EACON Field mountable microwave cable Edition 2012 Bezpośredni importer i dystrybutor INEXIM Sp. z o.o. www.inexim.pl Easy connected EACON - the field mountable cable assembly 4 EACON 4C 6 Suitable to
Multi-Wing Z Series Fans Blade Pitch Angle Setting Instructions
Multi-Wing Z Series Fans Blade Pitch Angle Setting Instructions Before You Begin: To maintain balance of fan: Mark the hub castings across a joint, so the fan hub can be reassembled in the same orientation.
QN Male Connector Crimp/Solder Attachment for RG55, RG141, RG142, RG223, RG400
QN Male Connector Crimp/Solder Attachment for RG55, RG141, RG142, RG223, RG400 RF Connectors Technical Data Sheet PE44978 Configuration QN Male Connector 50 Ohms Straight Body Geometry Features Max Operating
INDEX Unflanged Elbows 7/8 Male - Male...2 1+5/8 Male - Male...3 1+5/8 Male - Female...4 1+5/8 Female - Female...5 3+1/8 Male - Male...6 Flanged Elbows 7/8...8 1+5/8...9 3+1/8...10 Coaxial Adaptors 7/8
Amphenol RF. MMCX Micro-Mate (MMCX) Connectors MMCX. Description. Features/Benefits. Applications
Amphenol RF 14 Micro-Mate () Connectors Description (also called MicroMate TM ), is a micro-miniature connector series with a snap-lock mechanism allowing for 360 degrees rotation enabling flexibility
The GPO male interface is compliant to MIL-STD-348, and it is in accordance with MIL-PRF-39012a and DESC 94007/94008.
GPO, GPPO and G3PO Application Notes Corning Gilbert s push-on connector products allow users flexibility in modular and board layout (in high density situations), frequency bandwidths from DC to 100 GHz
Pogo Contacts for Board Test, Battery Interconnects, Medical Devices and other Momentary Electrical Contacts
P Y L O N P O G O C O N T A C T S Pogo Contacts for Board Test, Battery Interconnects, Medical Devices and other Momentary Electrical Contacts The Pylon Advantage The Pylon Pogo Contact advantage comes
SMB Connectors. Adaptors-50Ω. Plug to Plug. Jack to Jack. Plug to Jack. Bulkhead Jack to Jack
SMB Connectors Adaptors-50Ω Plug to Plug 1P-801-00 Jack to Jack 1P-802-00 Plug to Jack 1P-803-00 Bulkhead Jack to Jack 1P-804-18 Mini-SMB 75Ω Straight Plug 1P75-111-00 Cable group RG316 Straight PCB Jack
Amphenol RF Interconnects BNC 31 Series Bayonet Lock RF Connector System
BNC 31 Series Bayonet Lock RF Connector System Materials Body/Finish /Nickel Centre MALE Centre FEMALE Phosphor Bronze Centre Finish Gold 30µ Insulator Delron/PBT Gasket Silicone Rubber Crimp s Annealed
Fasteners. Fastener. Chapter 18
Fasteners Chapter 18 Material taken from Mott, 2003, Machine Elements in Mechanical Design Fastener A fastener is any device used to connect or join two or more components. The most common are threaded
RFX. Type N RG58, 141, 142 Straight Plug Type N Connectors» Cable Straight. Jack 50 Ohm Yes
Please note: Images are for reference only Amphenol Part Number: Description: Product Series: Product Type: Connector Body Style: Gender: Impedance: RoHS Compliant: 082-5376-RFX RG58, 141, 142 Straight
242, , FAX.
TEL. 886 2 8994 1601, FAX. 886 2 8994 1602 sales@rfconnector.com.tw, www.rfconnector.com.tw General Information SMA SMB Subminiature Connectors Screw Lock Subminiature Connectors Snap Lock 50 Ω 18 GHz
Corning Gilbert Inc. Microwave Push-on Interconnects 1
Corning Gilbert Inc. Microwave Push-on Interconnects 1 GPO Specifications General Characteristics Impedance 50 ohms nominal Frequency range DC to 40 GHz Temperature range -65 C thru 165 C Electrical Characteristics
GPPO Interconnect Series Product Information
GPPO Interconnect Series Product Information A sub-miniature, push-on, high performance, microwave interconnect system. Developed in response to industry demand for increased package density, lower weight,
DOOR B O T T O M S CONTENTS:
DOOR B O T T O M S CONTENTS: utomatic Door Bottoms...62-65 Security Door Bottoms... 66 Residential utomatic Door Bottoms... 66 Specialty Door Bottoms... 67 Door Top Weatherstrip... 67 Door Shoes...68-70
SAGE Millimeter, Inc.
Description: Model SAM-5735930395-15-L1-4W is a linear polarized, 58 GHz microstrip patch 1 x 4 array antenna. The antenna array implements four individual antenna ports so that beamforming can be achieved
TNC Male Right Angle Connector Crimp/ Solder Attachment for RG174, RG316, RG188, inch, PE-B100, PE-C100, LMR-100
TNC Male Right Angle Connector Crimp/ Solder Attachment for RG174, RG316, RG188, 0100 inch, PE-B100, PE-C100, LMR-100 RF Connectors Technical Data Sheet PE4455 Configuration TNC Male Connector 50 Ohms
R/L, AND LXE TYPE CABLE
OFS Fitel Figure 1. FOR CROSSPLY, R/L, AND LXE TYPE CABLE 636-299-110-05 Comcode: 847 815 297 12A1 Cable Clamp Issue 2 March 2002 2002 OFS Fitel All Rights Reserved Printed in U.S.A. Page 1 of 6 12A1 CABLE
Low Loss Pre-Connectorized Cable Sets, LL58 Series, DC-3.5GHz
Low Loss Pre-Connectorized Cable Sets, LL58 Series, DC-3.5 reliable performance, dependable service Replace traditional RG types for benefit of: lower loss better shielding > - 90dB Drop in replacement
Installation Introduction
Installation Guide Installation Introduction The On The Right Track system is a very versatile system, it can being installed several different ways and on various ceiling types. Here are the installation
Conductive Elastomer Waveguide Gaskets
Conducive Elasomer Waveguide Gaskes WAVEGUIDE GASKES Parker Chomerics offers a selecion of EMI gaske maerials ha provide effecive EMI shielding and pressure sealing for choke, cover and conac flanges.
INSTALLATION INSTRUCTIONS FOR INSTALLING T-SERIES EXTRA HEAVY DUTY LEVER LOCKSET
HIGH EDGE 2 1/4"(57mm) 03079400070 INSTALLATION INSTRUCTIONS FOR INSTALLING T-SERIES EXTRA HEAVY DUTY LEVER LOCKSET IMPORTANT: THIS LOCK IS NON-HANDED. LOCK IS FACTORY PACKED PREADJUSTED FOR 1³ ₄" (45mm)
7/16 DIN Male Right Angle Connector Clamp/Solder Attachment for RG213, RG214, RG8, RG9, RG225, RG393, RG215
7/16 DIN Male Right Angle Connector Clamp/Solder Attachment RF Connectors Technical Data Sheet PE44280 Configuration 7/16 DIN Male Connector MIL-C-39012 50 Ohms Right Angle Body Geometry Features Silver
SMP & SMPM. RF Interconnect Solutions CONNECTING INNOVATION TO APPLICATION
SMP & SMPM RF Interconnect Solutions CONNECTING INNOVATION TO APPLICATION Custom interconnect company servicing high-cost-of-failure end markets and customers A broad range of RF, Signal, Power, and Fiber
FMSW6124 DATA SHEET. Transfer Latching Electro-Mechanical Relay Switch From DC to 40 GHz, 5 Watts with Indicators, TTL, Self Cut Off, Diodes, 2.
Transfer Latching Electro-Mechanical Relay Switch From DC to 40 GHz, 5 Watts with Indicators, TTL, Self Cut Off, Diodes, 2.92mm The FMSW6124 is a Transfer Electromechanical Relay Switch that operates over
Microwave Antennas making the world smaller
Microwave Antennas making the world smaller www.procom.dk Index MICROWAVE ANTENNAS 10 GHz Omnidirectional Antennas WGSL 10 2 Parabolic Antennas PRO-10-001/25 3 PRO-10-001/50 4 Accessories PRO-10-... 5
Amphenol RF MCX. MCX Connectors MCX. Description. Features/Benefits. Applications
Amphenol RF 20 Connectors Description connectors conform to the European CECC 22000 spec and were introduced in the 1980 s. While the uses identical inner contact and insulator dimensions as the SMB, the
Coaxial Fixed Attenuator
Coaxial Fixed Attenuator RF Fixed attenuator RF Fixed attenuator is a device used to reduce power levels of a signal by a fixed amount with little or no reflections. Applications Extending the dynamic
kwiqmate Connectors Product Catalog Johnson
Product Catalog Johnson Emerson Connectivity Solutions, provider of kwiqmate branded Johnson product line of QMA connectors features a push-on style interface. Traditionally SMA plugs need to be configured
Magnum TM Cartridge Heaters
Magnum TM INTRODUCTION Magnum cartridge heaters are swaged designs, made for use in applications where high density, high temperatures and long service life are critical to minimize mold service downtime
PARABOLIC ANTENNA MODEL MTA GHz 10.0 GHz
INSTRUCTION MANUAL PARABOLIC ANTENNA MODEL MTA-60 1.0 GHz 10.0 GHz INSTRUCTION MANUAL THIS INSTRUCTION MANUAL AND ITS ASSOCIATED INFORMATION IS PROPRIETARY. UNAUTHORIZED REPRODUCTION IS FORBIDDEN. 1993
SERIESN50, COAXIAL CONNECTORS
SERIESN50, COAXIAL CONNECTORS DESCRIPTION CONTENTS PAGE HUBER+SUHNER N connectors are available with 50 and 75 impedance. The frequency range extends to 18 GHz, depending on the connector and cable type.
SMB Plug Connector Crimp/Solder Attachment for RG174, RG316, RG188, LMR-100, PE-B100, PE-C100, inch
SMB Plug Connector Crimp/Solder Attachment for RG174, RG316, RG188, LMR-100, PE-B100, PE-C100, 0100 inch RF Connectors Technical Data Sheet PE4046 Configuration SMB Plug Connector MIL-STD-348A 50 Ohms
SMA Male Connector Crimp/Solder Attachment for RG58, RG303, RG141, PE-C195, PE-P195, LMR-195, inch
SMA Male Connector Crimp/Solder Attachment for RG58, RG303, RG141, PE-C195, PE-P195, LMR-195, 0195 inch RF Connectors Technical Data Sheet PE4215 Configuration SMA Male Connector MIL-STD-348A 50 Ohms Straight
CABLE ORDERING INFORMATION How to Build Custom Cable Assemblies
p.1 CABLE ORDERING INFORMATION How to Build Custom Cable Assemblies Using our Cable Specification Chart and Connector Designation Code Chart, you can easily develop your own part numbers for custom cable
Tru products are now under the Tru-Win brand from Winchester Interconnect.
TRU MEIA Series Tru-Win MEIA offers the latest innovation in high power connector design. The MEIA interface provides equivalent kw power handling compared to similar EIA connector line sizes but provides
HN Male Connector Crimp/Solder Attachment for RG214, RG9, RG225, RG393
HN Male Connector Crimp/Solder Attachment for RG214, RG9, RG225, RG393 RF Connectors Technical Data Sheet PE4474 Configuration HN Male Connector MIL-STD-348A 50 Ohms Features Max Operating Frequency 3
Poke-Home: Horizontal AWG: WTB INTER CONNECT APPLICATIONS FEATURES AND BENEFITS ELECTRICAL MECHANICAL ENVIRONMENTAL HOW TO ORDER 00X
The new 9276 series connector provides a quick and reliable wire-toboard termination in a sleek 2.5mm pitch SMT package for a broad range of industrial and commercial markets. With almost every product
Conduct-o-Seal Oriented Wire in Silicone Gasket Material
East Coast Shielding Oriented wire in silicone gasketing material is a combination EMI shield and environmental pressure seal. Produced on location, this product is fabricated with individual wires positioned
ADVANCED GROUP. Pee-Series Series 12 KVDC. Introduction. Introduction
Introduction Introduction Pee-Wee is a series of subminiature, high voltage connectors and cable assemblies for use in high voltage applications where dense electronic packaging is required. Pee-Wee uses
Introduction to Flann Microwave
Introduction to Flann Microwave Representative presentation September, 2016 Flann Microwave Background Established 1956 Moved to Cornwall in 1970 Family- owned and independent ISO 9001:2008 working towards
What is New What is Working Well
What is New What is Working Well June 2014 1 How Are We Doing? SALES 2013 was a good year 2014 to May World-Wide Sales Distribution Americas, Europe, Asia/Pacific Africa What is Selling? 2 How Are We Doing?
Labs. Introduction. Specialty Family
INC. Labs Introduction Specialty Family Features K-Jumper: Affordable, High Performance Interconnect up to 35 GHz Space-Flex : Semi-Rigid and Flexible Cable Assemblies for S-Level Space T-Flex : Flexible
SMA Description Applications Features
MCX SMA Description SMA connectors are adaptable to interconnection requirements of both systems and components.s - Corm offers a wide variety of cable connectors,receptacles, feed thrus, end launches,
RP SMA Male Right Angle Connector Solder Attachment for PE-SR402AL, PE-SR402FL, RG402
RP SMA Male Right Angle Connector Solder Attachment for PE-SR402AL, PE-SR402FL, RG402 RF Connectors Technical Data Sheet PE4790 Configuration SMA Male Reverse Polarity Connector MIL-STD-348 50 Ohms Right