8.8 Standard Products
|
|
- Bertina McGee
- 6 years ago
- Views:
Transcription
1 . Standard Products INR Price List No. DFL-07 Effective 1st April 1 S D S D S D S D AD ISO 9001 ISO/TS ISO 11 OHSAS 1001
2 Limited Warranty And Exclusive Remedy Deepak Fasteners Limited (DFL) warrants that these products conform to industry standards specified herein and will be free from defects in materials and workmanship. This warranty is expressly given in lieu of any and all other express or implied warranties, including any implied warranty of merchantability or fitness for a particular purpose, and in lieu of any other obligation on our part of DFL will at its option, repair or replace free of charge (excluding all shipping and handling costs) any products which have not been subject to misuse, abuse, or modification and which in its sole determination were not manufactured in compliance with the warranty given above. The remedy provided herein shall be the exclusive remedy for any breach of warranty or any claim arising in any way out of the manufacture, sale or use of these products. In no event shall Deepak Fasteners be liable for consequential, incidental or any other damages of any nature whatsoever except those specifically provided herein for any breach of warranty or any claim arising in any way of the manufacture, sale or use of these products. No other person is authorised by Deepak Fasteners to give any other warranty, written or oral, pertaining to the products. Disclaimer All information contained in this pricelist has been prepared to assist users in their requirements for Fasteners. The information is based on International Fastener Standards. All such source material and information beyond the control of Deepak Fastener Limited (DFL) is subject to change. Whilst every care has been taken to ensure that all information and technical data is accurate, DFL will not be liable to any customer that relies on any matter, fact or representation nor will it be liable for any subsequent damage or loss resulting from the use of any information contained in this pricelist. Customers are advised to make their own enquiries or seek independent advice regarding the fitness and suitability of the products listed. Deepak Fasteners Limited has the right to change the price without any information, if there is a big change in the price of steel or zinc. No guarantee can be given for DFL (hex bolt & nut) products which are plated by users and/or outside plates, The products listed in this pricelist might not be stocked at DFL at all times and customers are advised to enquire the availability of the same. E. & O. E. Note Surface Finish : All the products, unless otherwise ordered, are supplied in black thermal finish with a coat of rust preventive oil. Packing Plating : All products are supplied in standard packing as described in respective price tables. For sizes M6 (1/4) and above 3% extra packing charges will be applicable if the order quantity is less than one carton. : No guarantee can be given for DFL products which are plated by users or by outside plates, Pricing : GST extra as applicable. 1 Toll Free:
3 Delivery: All offers for delivery from stocks are subject to goods remaining unsold at the time of receipt of order. For forward delivery, dates are given without any guarantee and no responsibility can be accepted by the company for delay in delivery or failure to deliver due to circumstances beyond the company's control. Infringement of patent and trade mark: When products are forged to customer's drawings and / or specifications, the responsibility to ensure that these do not result in infringement of any patent or trademark will lie entirely with customer concerned and the customer will be solely responsible for the consequence in case of any such infringement. Order confirmation: The company accepts no responsibility for orders booked by the company's salesman or representatives, till it is confirmed in writing by the company. Acceptance and return: Wrong dispatches should be notified to the company within days from the date of receipt of goods and the Company's consent should be obtained in writing before return of such goods. Force Majeure: The company shall not be responsible for failure or delay in delivering the goods or any part thereof (or any consequential damages) due to acts of God, enemies of the Government of India, wars, revolution, embargo, riots, civil or political disturbances, strikes, lock-outs, stoppages of labour. Certifications ISO 9001: CE CERTIFICATION : ISO / TS 16949:9 ISO/IEC 170: BS EN & 14 Toll Free:
4 Hex Head Bolts / Screws Dia M4 M M6 M Length 0 Pcs 0 Pcs 0 Pcs 0 Pcs ,001 1,40 1,667 1,793 1,9 2, ,012 1,00 1,144 1,211 1,362 1,4 2,13 2,70 2,90 3,246 3,47 3,707 3,927 4,147 4,367 4, Specifications : Generally conforming to IS:1364, ISO:4014, Threads : ISO 6g as per IS per IS: Material Mechanical Properties : Property Class. as per IS: Note : Grey shaded sizes are fully threaded. Prices for fully threaded screws beyond shaded sizes will cost % extra.. Marking : DFL. 6. Plating : No guarantee can given for DFL products which are plated by users or by outside plates, % will be Charged Extra For Zinc Cr3+Plating 7. Pricing : GST extra as applicable. 3 Toll Free:
5 Hex Head Bolts / Screws Dia M M12 (M14) M16 Length 0 Pcs 0 Pcs 0 Pcs 0 Pcs ,1 1,290 1,396 1,46 1,93 1,69 1,03 1,909 2,013 2,223 2,433 3,7 4,019 4,322 4,627 4,932,7 6,404 7, ,096 1,6 1,20 1,403 1, 1,21 1,972 2,1 2,276 2,36 2,37 2,6 2,3 3,136 3,429 3, 4,237 4,60 4,923,247,9 6,29 7,323,0,77 9,71,630 11, ,799 1,96 2,134 2,306 2,4 2,74 2,990 3,194 3,34 3,64 3,76 3,972 4,312 4,719,33,79 6,1 6,40 6,929 7,391,711,17 11,7 12,791 13,794 14,797, ,694 2,611 2,36 3,062 3,29 3,496 3,904 4,176 4,447 4,719 4,991,262,0 6,313 6,7 7,401,131,69 9,262 9,906 11,04 12,7 13,906,096 16,26 17,477 1, Specifications : Generally conforming to IS:1364, ISO:4014, Threads : ISO 6g as per IS per IS: Material Mechanical Properties : Property Class. as per IS: Note : Sizes in brackets are non-preferred standard. Grey shaded sizes are fully threaded. Prices for fully threaded screws beyond shaded sizes will cost % extra.. Marking : DFL. 6. Plating : No guarantee can given for DFL products which are plated by users or by outside plates, % will be Charged Extra For Zinc Cr3+Plating 7. Pricing : GST extra as applicable. Toll Free:
6 Hex Head Bolts / Screws Dia (M1) M (M22) Length 0 Pcs 0 Pcs 0 Pcs ,073 4,34 4,617 4,923,33,0 6,14 6,43 6,790 7,46,149,26 9,6,464 11,173 11,7 12,46 14,724 16,26 17,69 19,1,672 22,160 23, ,262,602,9 6,313 6,64 7,43 7,41,249,67 9,473,26 11,2 11,9 13,2 14,070 14,01,7 1,367,22 22,06 23,94,0 27,664 29, ,43 7,76,24,726 9,39,049, 11, 12,61 13,0 14,39,29 16,6 17,16 1,64,9 23,1 27,13 30,016 32,1 3,019 36,34 1. Specifications : Generally conforming to IS:1364, ISO:4014, Threads : ISO 6g as per IS per IS: Material Mechanical Properties : Property Class. as per IS: Note : Sizes in brackets are non-preferred standard. Grey shaded sizes are fully threaded. Prices for fully threaded screws beyond shaded sizes will cost % extra.. Marking : DFL. 6. Plating : No guarantee can given for DFL products which are plated by users or by outside plates, % will be Charged Extra For Zinc Cr3+Plating 7. Pricing : GST extra as applicable. Toll Free:
7 Hex Head Bolts / Screws Dia M24 (M27)* M30* Length 0 Pcs 0 Pcs 0 Pcs ,926,471 11,014 11, 12,1 12,399 13,96,2 16,34 17,17 19,064 19,94 21,1 22,449 23,696 26,190 29,931 33,246 3,730 3,214 40,69 43, ,974,7 16,22 17,277 1,032 1,77 19,42 21,091 23,9,1 27,60 2,9 30,34 32,172 34,37 37,3 40,9 44,2 4,47 2,031 6,003 9, ,,614 21,6 22,41 23,433 24,37, 27,7 30,46 32,69 34,93 36,41 3,726 40,9 43,096 47,663 2,031 6,401 60,770 6,140 69,9 73,77 1. Specifications : Generally conforming to IS:1364, ISO:4014, Threads : ISO 6g as per IS per IS: Material Mechanical Properties : Property Class. as per IS: Note : Sizes in brackets are non-preferred standard. Grey shaded sizes are fully threaded. Prices for fully threaded screws beyond shaded sizes will cost % extra. * Long Delivery Items - Subject to extended deliveries (3 to 4 months) Users are advised to plan their requirements in advance.. Marking : DFL. 6. Plating : No guarantee can given for DFL products which are plated by users or by outside plates, % will be Charged Extra For Zinc Cr3+Plating 7. Pricing : GST extra as applicable. Toll Free:
8 Hex Head Bolts / Screws Dia (M33)* M36* M42* Length 0 Pcs 0 Pcs 0 Pcs ,72 32,013 34,397 36,41 40,13 43,294 4,676 4,47 1,237 3,621,7 63,949 69,9 74,671 0,232,39 90, ,321 42,3 4,279 49,1 2,429,9,36 61,64 64,742 71,096 77,42 3,07 90,160 96,16 2,71 9, ,64 6,36 69,1 73,03 7,642 3,014 7,32 91,1 0,092,30 117,6 126,30 13,04 139,09 144,76 1. Specifications : Generally conforming to IS:1364, ISO:4014, Threads : ISO 6g as per IS per IS: Material Mechanical Properties : Property Class. as per IS: Note : Sizes in brackets are non-preferred standard. Grey shaded sizes are fully threaded. Prices for fully threaded screws beyond shaded sizes will cost % extra. * Long Delivery Items - Subject to extended deliveries (3 to 4 months) Users are advised to plan their requirements in advance.. Marking : DFL. 6. Plating : No guarantee can given for DFL products which are plated by users or by outside plates, % will be Charged Extra For Zinc Cr3+Plating 7. Pricing : GST extra as applicable. 7 Toll Free:
9 Hex Nuts Diameter M4 x 0.70 M x 0.0 M6 x 1 M x 1. (M) x 1. M x 1. M12 x 1. (M12) x 1. (M14) x 1. M14 x 2 (M16) x 1. M16 x 2 (M1) x 1. M1 x 2. (M) x 1. M x 2. (M22) x 2. M24 x 3 (M27) x 3 M30 x 3. (M33) x 3. M36 x 4 M42 x Pcs ,167 1,111 1,94 1,60 2,4 2,427 2,976 4,146 7,1 9,91 13,409 1,321 30, Specifications : Generally conforming to IS:1364, ISO: Threads : ISO 6H as per IS:421, ISO:261, ISO: Material and Mechanical Properties : Property Class as per IS:1367, ISO:9 Part-II. 4. Note : Sizes in brackets are non-preferred non-standard sizes.. Marking : M6 to M42 Marking will be DFL. 6. Plating : No guarantee can given for DFL products which are plated by users or by outside plates, % will be Charged Extra For Zinc Cr3+Plating 7. Pricing : GST extra as applicable. Toll Free:
10 Plain Washer Diameter 4mm mm 6mm mm mm 12mm 14mm 16mm 1mm mm 22mm 24mm 27mm 30mm 33mm 36mm 42mm Pcs ,36 1,77 2,1 3,16 3,64 7, Specifications : Generally conforming to IS : Plating : No guarantee can given for DFL products which are plated by users or by outside plates, who may not have considered hydrogen embrittlement problem. % will be Charged Extra For Zinc Cr3+Plating 3. Pricing : GST extra as applicable. Specialized Coatings The product's life and quality is measured not only by its grades and standards but also by its finish, which prevents it from rusting and adds strength to the material. Deepak Fasteners offers a wide range of generic and proprietary coating to meet exacting customer requirements. In-house capability includes Zinc / Zinc-Nickel Electroplating, Geomet, Mechanical Galvanizing, Delta Dorken, Hot Dip Galvanizing, PTFE, Unbrako Wiscoat. 9 Toll Free:
11 THE WORLD LEADER Construction Fasteners Arc Welding Stud The UNBRAKO Arc Welding Stud also known as shear connector is used in the construction of tall buildings, bridges and steel structures. The drawnarc process produces a full cross-sectional weld forming a bond that is greater than the surrounding material. It improves the strength of the structure. Product Range : : M13, M16, M19, M22, M Any Length Inch: 1/2, /, 3/4", 7/, 1 Any Length Direct Tension Indicator UNBRAKO Direct Tension Indicator also known as Auto Torque Indicator, are single-use mechanical load cells designed to indicate the magnitude of preload in the assembly. It shows if the bolt is properly tensioned, very useful while tensioning High Strength Structural Bolts. Product Range : : M16 M36 as per BS EN Unbrako Feeler Gauge is available to check if the required torque is achieved. Tension Control Structural Bolt Unbrako Electric Shear Wrench Tension Control Structural Bolt is an easy to install Heavy Duty Bolt used in Steel Frame Construction. It has its own built-in torque control device. The outer socket of wrench rotates the nut until the torque control groove in the spline shears off, thereby achieving proper bolt tension. Product Range : : M12 M30 (any length) As Per BS EN Unbrako Electric Shear Wrench is also Available. Rebar Coupler Unbrako Rebar Coupler Systems, also known as Reinforcing bar couplers or coupler splicing connection, is a threaded sleeve that guarantees an ultimate tensile strength of the splice (joint) greater than that of the parent bar. Coupler splicing system is suitable for joining reinforcement bars end to end. Product Range : : 13mm to 7mm Bar Diameter As per ASTM A6, ASTM A706, ASTM A7, ACI 31, ACI 349, A.A.S.H.T.O and UBC Unbrako provides complete equipment for bar-end preparation on site. Prices available on request. Contact Unbrako for further detail. Download the Free Unbrako Fastener App for iphone & Android at :
12 In Fasteners Engineering You Name It, We Have It Deepak Fasteners Limited 4th. Floor, First Mall, The Mall, Ludhiana (INDIA) Tel: , , Fax: , 2774 CENTRAL MARKETING OFFICE:- Deepak Fasteners Limited G.T. Road, Miller Ganj, Opp. Ramgariya Gurudwara, Ldh Tel.: , Fax: , Mob EASTERN REGION OFFICE:- Deepak Fasteners Ltd. H.M.P. House, Mezannine Floor, Room No.34, No.4 Fairlie Place, Kolkata-001. Mob AHMEDABAD OFFICE:- Deepak Fasteners Limited. 30, Basant Complex, opp. Hdfc Bank House, Above State Bank of India, Char Rasta, Navrangpura, Ahmedabad Mob NORTHERN REGION OFFICE:- Deepak Fasteners Limited Plot No. 333/3, Near Allahabad Bank, Rajiv Colony, Rajiv Chowk, Main Service Rd, NH-, Gurgaon, Haryana -121 Mob WESTERN REGION OFFICE:- Deepak Fasteners Limited. Office No-233, Bldg-D-, 2nd Floor, Bhumi World, Pimplas Mumbai Nasik Highway (NH-3) Dist, Thane Mob , SOUTHERN REGION OFFICE:- Deepak Fasteners Limited Ega Trade Centre, 1st Floor, Office No., 09, Poonamallee High Road, Kilpauk, Chennai Mob.: Tel. No , chennai.mkt@deepakfasteners.com DFL.-P Copyright 1 Deepak Fasteners Limited. All Rights Reserved. Website: sales@deepakfasteners.com
Limited Warranty And Exclusive Remedy
Limited Warranty And Exclusive Remedy THE WORLD LEADER Deepak Fasteners Ltd., through its Unbrako Division and associated companies, warrants that these products conform to industry standards specified
More informationTHE WORLD LEADER. Reinforcing Bar Coupler System. For The Construction Industry.
THE WORLD LEADER Reinforcing Bar Coupler System For The Construction Industry Unbrako Reinforcing Bar Coupler System Unbrako Rebar Coupler Systems, also known as reinforcing bar couplers or coupler splicing
More informationTHE WORLD LEADER.
THE WORLD LEADER www.unbrako.com Securing the World For more than 100 years, Unbrako has designed and manufactured premium and custom designed fasteners and forged components for demanding applications.
More informationTHE WORLD LEADER.
THE WORLD LEADER www.unbrako.com unbrakosales@unbrako.com Securing the World For more than 100 years, Unbrako has designed and manufactured premium and custom designed fasteners and forged components for
More informationFASTENERS. Specialist in Hi-Tensile & Mild Steel
FASTENERS Specialist in Hi-Tensile & Mild Steel Fasteners Business Established in 2003, Karamtara's Fasteners business vertical provides truly global services. We provide special industrial fasteners to
More informationTHANK YOU FOR PURCHASING OUR STUDIO RTA CREATION STATION
THANK YOU FOR PURCHASING OUR STUDIO RTA MODEL# 20672 IF YOU REQUIRE ANY ASSISTANCE WITH ASSEMBLY, PARTS, OR INFORMATION ON OTHER PRODUCTS, PLEASE VISIT OUR WEBSITE: www.studiorta.com OR CALL OR WRITE THE
More informationMaxLite LED Self-Driven LiteBars
Accessories Length: 4, 12, 40 Connector Box Straight Joiner Wire Joiner Mounting Clip Distribution Box Left Joiner Wire Joiner with Plug length: 40 Magnet Bracket Right Joiner End Cap Rotation Bracket
More informationSpa & Hot Tub Necessities. Cover Removal System Installation & Use Manual
Spa & Hot Tub Necessities Cover Removal System Installation & Use Manual SET-UP AND ASSEMBLY BEFORE BEGINNING ASSEMBLY, CAREFULLY READ THE FOLLOWING INFORMATION AND INSTRUCTIONS: Place all parts in a cleared
More informationADJUSTABLE MOUNTING POST
C Part Number 069 B EACH CARTON CONTAINS D Floor Mounting Kit A. Bottom Post Assembly B. Top Post Assembly C. Flange Head Bolts (x2) D. Floor Mounting Kit. 5/8 Wx/6 Hx0 L framing channels (x2) 2. /8-6x4
More informationPANEL EDGE NUTS (U-NUTS)
PANEL EDGE NUTS (U-NUTS) Provide simple, rapid attachment of mating panels Parts self-retain in screw receiving position New long-throat tapped barrel variations New U-Nut Speed with ergonomic thumb tab
More informationSafety Awareness Barriers
INSTALLATION INSTRUCTIONS FOR These safety awareness barriers are ideal for use in the manufacturing industry to provide a physical and visual means to warn people that hazards exist beyond the barrier.
More informationCE CERTIFIED COMPANY DEEPAK FASTENES LTD. IN FASTENERS ENGINEERING, YOU NAME IT - WE HAVE IT
DEEPAK FASTENES LTD. IN FASTENERS ENGINEERING, YOU NAME IT - WE HAVE IT From Hightensile Stainless Steel CUSTOMER COMMITMENT A reputed nanme in the fasteners industry with latest technology, high quality
More informationStructural Bolting. Notice the Grade 5 has a much smaller head configuration and a shorter shank then the grade A325 structural bolt.
Structural Bolting ASTM F3125/F3125M is a structural bolt specification covering inch and metric bolt grades. This specification contains 4 inch series bolting grades: A325, F1852, A490, and F2280. These
More informationWARRANTY REGISTRATION AND POLICY
WARRANTY REGISTRATION AND POLICY Buhler Manufacturing products are warranted for a period of twelve (12) months from original date of purchase, by original purchaser, to be free from defects in material
More informationInstruction Sheet D-CPU. Secure CPU Holder
Instruction Sheet D-CPU Secure CPU Holder I-00457 Rev A PARTS LIST NOTE: Select Security Components when a more secure application is desired. Mounting Track with Mounting Tape Security Bracket Assembly
More informationInstallation Manual Roof Zone Ladder Rack
Installation Manual Roof Zone Ladder Rack 102113,E1346 Installation Time: About 90 minutes. Depending on truck and Do-it-Yourself experience level Tools Required: Electric Drill with 1/2 Chuck 1/2 & 7/32
More informationManual Carton Closing Staplers
Operator s Manual Manual Carton Closing Staplers SHB00-A Item No. 6400 -/8" Crown Carton Closing Stapler 5/8" and /4" (5mm and 8mm) Ask for Genuine INTERCHANGE A58 and A4 Staples SHB50-C Item No. 640 -/4"
More informationTilting Flat Panel Wall Mount Installation Guide
Tilting Flat Panel Wall Mount Installation Guide Model: A580TM Easy installation Built-in level for easy positioning Safety bolts lock the TV on the mount Easy to adjust tilt angles: +5 to -15 degrees
More informationASSEMBLY INSTRUCTIONS
AVSC-2123 Audio Video System ASSEMBLY INSTRUCTIONS PATENT PENDING FOR YOUR SAFETY, PLEASE FOLLOW THESE PRECAUTIONS:! ALWAYS REMOVE THE TV AND OTHER EQUIPMENT FROM THE FURNITURE PRIOR TO MOVING THE ASSEMBLED
More informationPRC-LA Installation Guide
1321 S. State College Blvd., Fullerton, CA 92831 USA Weight Limit Maximum Flat Panel Weight: Warning Statements 50 lbs. THE WALL STRUCTURE MUST BE CAPABLE OF SUPPORTING AT LEAST FOUR TIMES THE WEIGHT OF
More informationContents. Grade 2, 5, 8 Hex Bolts 4. Heavy Hex Head Structural Bolts 6. A325 and A490 Tension Control Bolts (TC) 13. Nuts 22.
Who we are Amcan Jumax is the result of a merging between Boulons Jumax and Amcan Threaded Products, two successful companies well established, both with excellent reputations. The new entity is a bigger
More informationAM95 Installation Guide
1321 S. State College Blvd., Fullerton, CA 92831 USA Included Components: Maximum Flat Panel Weight: 95 lb. / 43.1 kg. M4 X 25mm M5 X 25mm M6 X 12mm (Qty 2) M6 X 25mm M8 X 25mm Allen Key Plastic Cover
More informationSERIES M MIXER MASTS
SERIES M MIXER MASTS T AB L E O F C O N T E N T S V e n d o r D a t a Material Data Sheet 4-in. Mixer Mast Specification 3-in. Mixer Mast Specification 2 - in. M i x e r M a s t S p e c i f i c a t i o
More informationProcedure for Wrench Calibration and Snug Tightening
Procedure for Wrench Calibration and Snug Tightening 1. Scope: This procedure provides the method for calibration of a manual torque wrench or an adjustable impact wrench and the snug tightening procedure
More informationCARES Technical Approval Report TA1-B 5042
CARES Technical Approval Report TA1-B 5042 Issue 4 Dextra ROLLTEC Standard, Positional and Caging Couplers Assessment of the Dextra ROLLTEC Standard, Positional and Caging Coupler Product and Quality System
More informationINSTALLATION INSTRUCTIONS FOR SMLS/SMSS Surface Mount Lock Shear & Surface Mount Strike Shear
Securitron Magnalock Corp. Tel 775.355.5625 550 Vista Boulevard Fax 775.355.5633 Sparks, NV 89434 info@securitron.com www.securitron.com ASSA ABLOY, the global leader in door opening solutions INSTALLATION
More informationCAUTION: WEIGHT ON THIS PRODUCT SHOULD NOT EXCEED 136KG / 300LBS.
OWNER S MANUAL Thank you for choosing the Sit N Cycle. We take great pride in producing this quality product and hope it will provide many hours of quality exercise to make you feel better, look better
More informationFlat Sample Holder Part Number
Flat Sample Holder Part Number 990-00403 (Patent Pending) Operator s Manual Copyright 2016 Gamry Instruments, Inc. April 8, 2016 988-00043 Rev. 1 If You Have Problems Please visit our service and support
More informationVAN STORAGE SOLUTIONS FOR THE WAY YOU WORK
WWW.WEATHERGUARD.COM VAN STORAGE SOLUTIONS FOR THE WAY YOU WORK Weather Guard / KNAACK 420 E. Terra Cotta Ave. Crystal Lake, IL 60014 USA 800-456-7865 (Toll Free) 800-334-2981 (Fax) Knaack.OrderEntry@wernerco,.com
More informationFull Height Ladder Safety Gate
Full Height Ladder Safety Gate Installation Instructions/Operation and Maintenance Manual Models Powder Coat Yellow (PCY) 304 Stainless Steel (SS) Hot Dipped Galvanized (GAL) Table of Contents Product
More informationPBM-UNI Installation Guide
1321 S. State College Blvd., Fullerton, CA 92831 USA Warning Statements Warning Warning Warning THE CEILING STRUCTURE MUST BE CAPABLE OF SUPPORTING AT LEAST FOUR (4) TIMES THE WEIGHT OF THE PROJECTOR.
More informationInstallation Instructions/Operation and Maintenance Manual. PS DOORS Contact Information. Website psdoors.com
Ladder Safety Gate Installation Instructions/Operation and Maintenance Manual Models All Models: LSG-5 to LSG-48 Table of Contents Product Information...2 Inspection & Mainteance...2 Warranty Information...2
More informationHydraulic Renovator 20
Model #: 704591 Starting Date: 2/2005 8HP Kawasaki Engine Hydraulic Renovator 20 ILLUSTRATED PARTS LIST 2 Handle Assembly - Fig. 1 4 7 19 17 9 1 56 58 1 12 14 55 5 16 21 7 8 27 17 0 26 24 6 2 52 4 15 11
More informationWenger Corporation 2010 Printed in China 02/10 Part #148H Wenger Corporation, 555 Park Drive, P.O. Box 448, Owatonna, Minnesota
Assembly Instructions Violin/Viola Storage Rack CONTENTS Safety Precautions.................................. Warranty.......................................... Important User Information............................
More informationAM500-U Installation Guide
1321 S. State College Blvd., Fullerton, CA 92831 USA Included Components Maximum Flat Panel Weight: 500 lb. / 226.79 kg. Wall Mount Bracket (Qty 2) Cross Bar 5/16 Flat Washers (Qty 6) Universal Spacers
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS P4263F Universal Low Profi le Flat Mount for 42 to 63 Flat Panels NORTH AMERICA 3130 East Miraloma Avenue Anaheim, CA 92806 USA USA and Canada Phone: 1.800.368.9700 Fax: 1.800.832.4888
More informationPARTS CATALOG FRONT WHEEL DRIVE FOR JOHN DEERE 6100 & WHEEL SPRAYERS
PARTS CATALOG FRONT WHEEL DRIVE FOR JOHN DEERE 6100 & 6500 3 WHEEL SPRAYERS MUD HOG MODEL NUMBERS JD6500-13.5-16.1 I3 Tire (Export) JD65003-12.5L-15 I3 Tire TUTHILL Transport Technologies Brookston Indiana
More informationSonoma Outdoor Kitchen Pergola. Assembly Instructions
Sonoma Outdoor Kitchen Pergola Assembly Instructions Introduction Thank you for your purchase from The Outdoor GreatRoom Company. This pergola has been engineered and manufactured in the USA. This user
More informationorientation Conergy SunTop Instructions for professional installation
On-roof Framed modules Portrait orientation Landscape Three-tab Shingle Plain tile Slate Double Roman tile Metal roof Material warranty orientation Conergy SunTop Instructions for professional installation
More informationroom essentials >> assembly instructions Drawer dresser w/ door Video instruction as Help to assembly, scan the QR code and see the video.
room essentials 4 Drawer dresser w/ door DPCI # 249-05-0418 (Black Woodgrain) DPCI # 249-05-0419 (Virginia Walnut) >> assembly instructions 92380 Video instruction as Help to assembly, scan the QR code
More informationth St N Oak Park Heights, MN Phone: Fax:
12430 55 th St N Oak Park Heights, MN 55082 Phone: 651.342.1756 Fax: 651.342.1293 Email: info@diacro.com SAFETY INFORMATION PG. 3 MAINTENANCE PG. 3 TECHNICAL DATA PG. 3 SET-UP PROCEDURE PG. 4 REMOVING
More informationInstallation Manual. Tamarack Solar Products. Top of Pole Mount Edition v1.01. For models:
Mount Installation Manual 2016 Edition v1.01 For models: UNI-TP/06 UNI-TP/06LL UNI-TP/08 UNI-TP/08LL UNI-TP/10 UNI-TP/10LL UNI-TP/12 UNI-TP/12LL UNI-TP02-MAN Table of Contents 1 Introduction 1 2 Customer
More informationInstallation Instructions
Articulating Hex Monitor Mount Stand Installation Instructions UNPACKING Carefully open the carton, remove contents, and place them on a protected surface to avoid damage. Check the parts and the Supplied
More informationTHANK YOU FOR PURCHASING OUR STUDIO RTA PROJECT STATION
THANK YOU FOR PURCHASING OUR STUDIO RTA MODEL# 50040 BLACK/MAPLE, 50042 PEWTER/CHERRY IF YOU REQUIRE ANY ASSISTANCE WITH ASSEMBLY, PARTS, OR INFORMATION ON OTHER PRODUCTS, PLEASE VISIT OUR WEBSITE: www.studiorta.com
More informationTABLE OF CONTENTS DESCRIPTION. Safety Instructions Assembly Operation... 7
TABLE OF CONTENTS DESCRIPTION PAGE Warranty... 1 Safety Instructions... 2 Assembly... 3 Operation... 7 #360 Grain Cleaner Drawings... 8 #360 Grain Cleaner Parts List... 10 Utility Auger Option Drawing...
More informationINSTALLATION INSTRUCTIONS
CREATING POSITIVE CUSTOMER EXPERIENCES INSTALLATION INSTRUCTIONS Universal Low Profile Tilt Mount for 42 to 63 Flat Panels NORTH AMERICA 3130 East Miraloma Avenue Anaheim, CA 92806 USA USA and Canada Phone:
More informationBlack or White Classic Country Chair Item Number Black Chair: BH Item Number White Chair: BH
ASSEMBLY INSTRUCTIONS Black or White Classic Country Chair Item Number Black Chair: BH10-084-90-1 Item Number White Chair: BH10-084-90-14 CUSTOMER SERVICE INFORMATION If parts are missing, DO NOT return
More informationTilting & Swiveling Flat Panel Wall Mount Installation Guide Model: AXS2040
Tilting & Swiveling Flat Panel Wall Mount Installation Guide Model: AXS2040 20-40 66 lbs. Supports VESA sizes up to: 200x200 For technical assistance or troubleshooting please call 1-855-994-2825 or visit
More informationIn normal joints, the clamping force should equal the working load. In gasketed joints, it should be sufficient to create a seal.
Fastener Quality Act Information Unbrako offers this link to the National Institute of Standards homepage on the Fastener Quality Act as an aide to individuals who need detailed and complete information
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS Premier Mounts Tilting Wall Mount Model: TWM-085 For use with Panasonic 85 Flat Panel NORTH AMERICA 3130 East Miraloma Avenue Anaheim, CA 92806 USA USA and Canada Phone: 1.800.368.9700
More informationUser Instruction Manual Model# RK21 RK21-M
User Instruction Manual Model# RK21 RK21-M FOR SALES, SERVICE OR TECH SUPPORT CALL: 1800-BUY-RIVET or 1-800-289-7483 WWW.RIVET.COM CONTENTS Safety Page 3 Specifications Page 3 Jaw Maintenance and Replacement
More informationOwner s Manual ODYSSEY BENCH MODEL. O4100B shown REV E. Southern Avenue, Phoenix, AZ USA Workhorseproducts.
Owner s Manual ODYSSEY BENCH MODEL O4100B shown 67-1375 REV 218 3730 E. Southern Avenue, Phoenix, AZ 85040 USA 800-778-8779 Workhorseproducts.com 1 Table of Contents I. Introduction & Safety Information.
More informationISO INTERNATIONAL STANDARD. Fasteners Torque/clamp force testing. Éléments de fixation Essais couple/tension. First edition
INTERNATIONAL STANDARD ISO 16047 First edition 2005-02-01 Fasteners Torque/clamp force testing Éléments de fixation Essais couple/tension Reference number ISO 16047:2005(E) ISO 2005 PDF disclaimer This
More informationOperating Instructions and Parts Manual SLT-1100 Jumbo Scissor Lift Table
Operating Instructions and Parts Manual SLT-1100 Jumbo Scissor Lift Table JET 427 New Sanford Road LaVergne, Tennessee 37086 Part No. M-140780 Ph.: 800-274-6848 Revision B1 05/2014 www.jettools.com Copyright
More informationSingle Arm Pole Mount. Installation Manual Edition v1.01. For models: UNI-SA/14 UNI-SA/21.5 UNI-SA/26 UNI-SA01-MAN
Pole Mount Installation Manual 2016 Edition v1.01 For models: UNI-SA/14 UNI-SA/21.5 UNI-SA/26 UNI-SA01-MAN Table of Contents 1 1 2 3 4 5 5 Introduction Customer Support Project Essentials Assembly: Steps
More informationSingle Flex and Double Flex Couplings (i)
Single Flex and Double Flex Couplings (i) FORM NO. L00G00 In accordance with Nexen s established policy of constant product improvement, the specifications contained in this manual are subject to change
More information00108/00110 INSTRUCTION MANUAL
00108/00110 INSTRUCTION MANUAL Removable and Adjustable Mudflap System IMPORTANT! Please Read this Instruction Booklet prior to assembly of your Rock Tamer Kit. IMPORTANT! Exhaust Systems Note: Any modifications
More informationINSTALLATION INSTRUCTIONS
CREATING POSITIVE CUSTOMER EXPERIENCES INSTALLATION INSTRUCTIONS PDS-PLUS Universal Projector Mount Model: NORTH AMERICA 3130 East Miraloma Avenue Anaheim, CA 92806 USA USA and Canada Phone: 1.800.368.9700
More informationINSTALLATION MANUAL SONANCE SOUNDBARS SB46 M AND SB46 L. Introduction. Box Contents. Wall Mount Installations
INSTALLATION MANUAL SONANCE SOUNDBARS SB46 M AND SB46 L Introduction Thank you for purchasing the Sonance Soundbar SB46 M or SB46 L. When properly installed your new Soundbar will give you years of entertainment
More informationHUSTLER 7' & 8' POOL TABLE ASSEMBLY INSTRUCTIONS
HUSTLER 7' & 8' POOL TABLE ASSEMBLY INSTRUCTIONS Please Do Not Hesitate to Contact Our Consumer Hotline at 800-759-0977 with Any Questions That May Arise During Assembly or Use of This Product! NG2515PB/NG2520PB
More informationThe Balustrade Collection
The Balustrade Collection The Hartmann Sanders Balustrade Collection is designed for a Lifetime of Enjoyment. Whether it is a restoration or a classic addition, the Hartmann Sanders Balustrade Collection
More informationTilting, Swiveling & Rotating Flat Panel Wall Mount
Tilting, Swiveling & Rotating Flat Panel Wall Mount Model: VXA980TC +5 to -5 +5 to -5 Supports most 0-80 Flat Panel TVs Maximum Weight Capacity: 32 lbs. Supports VESA Sizes up to 600x500 For technical
More informationISO INTERNATIONAL STANDARD. Fasteners Torque/clamp force testing. Éléments de fixation Essais couple/tension. First edition
Provläsningsexemplar / Preview INTERNATIONAL STANDARD ISO 16047 First edition 2005-02-01 Fasteners Torque/clamp force testing Éléments de fixation Essais couple/tension Reference number ISO 16047:2005(E)
More informationGEARGRID Seattle / SCUBA Storage System
GEARGRID Seattle / SCUBA Storage System Assembly Instructions & Owners Manual Thank you for choosing the Geargrid Seattle / SCUBA Storage System. Geargrid is committed to high-quality products and your
More informationInstallation Procedures For 2013 Mustang V-6 and 5.0
Installation Procedures For 2013 Mustang V-6 and 5.0 Warning: Please read directions completely before starting. If you have any questions please contact BMPP before beginning your installation.. Also
More informationATTENTION: PLEASE READ AND UNDERSTAND ALL INSTRUCTIONS AND WARNINGS BEFORE ASSEMBLING, INSTALLING OR USING THIS PRODUCT.
INSTALLATION MANUAL Models 96111-3-02 & 96511-3-02 Bulkheads for 2014 and Later Ford Transit Connect Vans ATTENTION: PLEASE READ AND UNDERSTAND ALL INSTRUCTIONS AND WARNINGS BEFORE ASSEMBLING, INSTALLING
More informationInstallation Instructions Kit, Base Rail Bracket Part # 31413
Installation Instructions Kit, Base Rail Bracket Part # 31413 Dealer / Installer: End User: Provide a copy of these Instructions to the end user of this product. These Instructions provide important operating
More informationTABLE OF CONTENTS DESCRIPTION. Safety Instructions Assembly Operation... 7
TABLE OF CONTENTS DESCRIPTION PAGE Warranty... 1 Safety Instructions... 2 Assembly... 3 Operation... 7 #360 Grain Cleaner Drawings... 8 #360 Grain Cleaner Parts List... 10 Utility Auger Option Drawing...
More informationImPortant InformatIon. Parts IdentIfIcatIon. Assembly Instructions for Model Number 138T-BK
800-428-8560 midwesthomes4pets.com P.O. Box 1031 Muncie, Indiana 47308 by Assembly Instructions for Model Number 138T-BK ImPortant InformatIon Unwrap and remove all parts from the box. Keep the box and
More informationCAPARO ENGINEERING INDIA LTD
2 Introduction Caparo is diversified, UK based group, specializing principally in the Manufacture & Supply of Steel, Automotive and General Engineering Products, the group has a grown as a global entity.
More informationInstruction Sheet SNE SERIES. Cable Chase
Instruction Sheet SNE SERIES Cable Chase THANK YOU Thank you for purchasing the SNE Series Cable Chase. Please read these instructions thoroughly before installing this product. PRODUCT FEATURES The 45
More informationSunset Swings By Health in Motion, LLC
Sunset Swings By Health in Motion, LLC Model 421 Lounge Swing Assembly and Operation Manual Record Serial Number Here www.sunsetswings.com by Health In Motion, LLC. 11/6/2009 421 Owners Assembly and Operation
More informationINSTALLATION & OPERATING INSTRUCTIONS. REDCO LETTUCE KING I and LETTUCE KING IV
INSTALLATION & OPERATING INSTRUCTIONS for REDCO LETTUCE KING I and LETTUCE KING IV Lettuce King I Shown with optional Drum Ring Lettuce King IV TO BE SERVICED ONLY BY AUTHORIZED PERSONS P/N: 2802381 REV:
More informationKhathij Industrial Fasteners
Dear Sir/Madam, Khathij Industrial Fasteners This is Saqubar Sadique representing 'KHATHIJ INDUSTRIAL FASTENERS' from Chennai, India. We 'Khathij industrial fasteners' like to introduce us as a Stockist
More informationMFJ-1835K34 40,30 METER ADD ON KIT FOR THE MFJ-1835 COBWEB ANTENNA INSTRUCTION MANUAL. CAUTION: Read All Instructions Before Operating Equipment
MFJ-1835K34 40,30 METER ADD ON KIT FOR THE MFJ-1835 COBWEB ANTENNA INSTRUCTION MANUAL CAUTION: Read All Instructions Before Operating Equipment 300 Industrial Park Road Starkville, MS 39759 USA Tel: 662-323-5869
More informationAssembly Instructions and Parts Manual JPSF-1 Fence and JPSR Rail Set #
Assembly Instructions and Parts Manual JPSF-1 Fence and JPSR Rail Set #1002493 JET 427 New Sanford Road LaVergne, Tennessee 37086 Part No. M-708482 Ph.: 800-274-6848 Revision C3 02/2014 www.jettools.com
More informationInstallation Manual. Tamarack Solar Products. Side of Pole Mount Edition v1.02. For models:
Mount Installation Manual 2016 Edition v1.02 For models: UNI-SP/01 UNI-SP/01A UNI-SP/01XH UNI-SP/01XX UNI-SP/02 UNI-SP/02A UNI-SP/02X UNI-SP/03 UNI-SP01-MAN Table of Contents 1 Introduction 1 Customer
More informationP4263TP. Installation Guide. Low-Profile Tilting Portrait Mount for Flat-Panels
Low-Profile Tilting Portrait Mount for Flat-Panels 1321 S. State College Blvd., Fullerton, CA 92831 USA Weight Limit Maximum Flat Panel Weight: 175 lbs. Warning Statements THE WALL STRUCTURE MUST BE CAPABLE
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS Universal Swingout Arm for 37 to 47 Flat Panels Model: AM80 NORTH AMERICA 3130 East Miraloma Avenue Anaheim, CA 92806 USA USA and Canada Phone: 1-800-368-9700 Fax: 1-800-832-4888
More informationInstallation Procedures For Corvette Basic/C-6 SNS 28
Installation Procedures For 2005-2013 Corvette Basic/C-6 SNS 28 Warning: Please read directions completely before starting. If you have any questions please contact BMPP before beginning your installation.
More informationInstallation Manual XRL Solar Rail System
Installation Manual XRL Solar Rail System Solar Mounting Solutions June 2009 www.ironridge.com 2009 IronRidge, Inc. All Rights Reserved Version 1.0 2 XRL Solar Rail System Installation Guide Introduction
More informationInstallation Procedures Maserati Gran Turismo Sport SNS 85
Installation Procedures 2012-2017 Maserati Gran Turismo Sport SNS 85 Warning: Please read directions completely before starting. If you have any questions please contact BMPP before beginning your installation.
More informationF-150 Structural Holding System
F-150 Structural Holding System Users Manual December 2013 by Vehicle Service Group. All rights reserved. CO8812.2 502073 Rev. - 12/11/2013 CHIEF'S LIMITED ONE-YEAR WARRANTY & LIABILITY Chief Automotive
More informationAssembly & Installation Instructions
Wall Mount Garden Hose Reel Model 1041 Assembly & Installation Instructions 1 2 3 4 5 6 8 9 10 12 15 7 11 10 16 17 13 14 CONTENTS QUESTIONS? PROBLEMS? Please DO NOT contact or return this item to the retailer.
More informationCONCRETE ACCESSORIES BAR-LOCK REBAR COUPLER SYSTEM
CONCRETE ACCESSORIES BAR-LOCK REBAR COUPLER SYSTEM quick and easy to install no special installation equipment high strength excellent for new construction and rehab projects Bar-Lock Coupler System* ICBO
More informationNPS/001/010 Technical Specification for Fasteners and Fixings for Wood Pole Overhead Lines and General Construction Works
Version:- 4.0 Date of Issue:- August 2014 Page 1 of 13 NPS/001/010 Technical Specification for Fasteners and Fixings for Wood Pole Overhead Lines and General Construction Works 1. Purpose The purpose of
More informationFXL-168 FIXED RACK ASSEMBLY INSTRUCTIONS SALES ORDER #
ZOMEWORKS FXL-168 FIXED RACK ASSEMBLY INSTRUCTIONS SALES ORDER # 1 1011 Sawmill Road NW, PO Box 25805, Albuquerque, NM 87125 USA (505) 242-5354 / (800) 279-6342 / FAX (505) 243-5187 E-mail: zomework@zomeworks.com
More informationInstallation and Maintenance Instructions
Limited One Year Warranty T&S warrants to the original purchaser (other than for purposes of resale) that such product is free from defects in material and workmanship for a period of one (1) year from
More informationINSTALLATION MANUAL v. 1.0
INSTALLATION MANUAL v. 1.0 2009 by Unirac, Inc. All rights reserved. Pub 090501-1ii, May 2009 www.clicksys-beam.com IMPORTANT! Unirac Inc. makes no warranty of any kind with regard to this material, including,
More informationInstallation Manual Tilt Leg
Installation Manual Tilt Leg Solar Mounting Solutions March www.ironridge.com 2010 IronRidge, Inc. All Rights Reserved Version 2.0 2 Tilt Leg Installation Guide Introduction The Tilt Leg is a flexible
More informationOWNER S MANUAL STORAGE SHED MODELS: STOR-96-G-W-1RH & STOR-912-G-W-1RH
STORAGE SHED MODELS: STOR-96-G-W-1RH & STOR-912-G-W-1RH OWNER S MANUAL Introduction.. 1 Assembly Instructions STOR-96-G-W-1RH... 2 Assembly Instructions STOR-912-G-W-1RH... 8 STOR-96-G-W-1RH Exploded Parts
More informationDELUXE POWER TOWER Model PT 675-E
DELUXE POWER TOWER Model PT 675-E CAUTION: WARNING: Do not use this product without a physician s approval. Do not let children use this product unsupervised. Read all instructions carefully before using.
More informationOperator s Handbook. Suspended Arm
Operator s Handbook Suspended Arm SAR15 Z 5 Code: 010690/Z/5 SAR15 XZ 85 Code: 010690/XZ/85 SAR15 XYZ 855 Code: 010690/XYZ/855 KOLVER S.r.l. VIA MARCO CORNER, 19/21 36016 THIENE (VI) ITALIA TEL +39 0445
More informationBASE & WALL CABINET SETUP GUIDE BY SUNSTONE
BASE & WALL CABINET SETUP GUIDE BY SUNSTONE Read all instructions before you install cabinet. Very important to follow each step in order as detailed in this Instruction Guide!!! To installer or person
More informationECM Installation Guide Installationsanleitung, Guía de Instalacíon, Guida de Installazione, Guide d Installation, Installatie gids
Elliptical Ceiling Mount for 37 to 63 Flat Panels Model: ECM-3000 Warranty, Garantie, Garantía, Garanzia, Garantie, Waarborg: http://www.mounts.com/warranty 9531-000-001-0X Rev.0 www.mounts.com North America
More informationOwner s Manual CD-42 CULTIVATING DISC MANUFACTURING QUALITY LAWN CARE EQUIPMENT SINCE Made In CHINA REV
MANUFACTURING QUALITY LAWN CARE EQUIPMENT SINCE 1945 Owner s Manual CD-4 CULTIVATING DISC IMPORTANT Read and follow all Safety Precautions and Instructions Before Operating this Equipment. Made In CHINA
More informationInstallation Procedures 2018 Mustang GT & EcoBoost SNS 135
Installation Procedures 2018 Mustang GT & EcoBoost SNS 135 Warning: Please read directions completely before starting. If you have any questions, please contact BMPP before beginning your installation.
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS Universal Short Throw Projector Arm Model: UNI-STA/UNI-EXT NORTH AMERICA 3130 East Miraloma Avenue Anaheim, CA 92806 USA USA and Canada Phone: 1-800-368-9700 Fax: 1-800-832-4888
More informationJAMP-630HC14-ULP. Installation and Operation Instructions. ROKKER XXRP 630w Amplifier Kit For Harley Ultra/Ultra Ltd.
ROKKER XXRP 630w Amplifier Kit For 2014-2018 Harley Ultra/Ultra Ltd. Fairing # JAMP-630HC14-ULP 2017 J&M Corporation. All rights reserved. 9/17 Installation and Operation Instructions Product Description
More informationSolarMount-I INSTALLATION MANUAL
SolarMount-I INSTALLATION MANUAL 2010 by Unirac, Inc. All rights reserved. Pub 100621-1ii, June 2010 R A HILTI GROUP COMPANY 1411 Broadway Boulevard NE Albuquerque, NM 87102-1545 USA IMPORTANT! Unirac
More information