Precision Values HB400 Measuring Projector. 6" Combination Square. 795 Electronic Micrometer. 799 Electronic Caliper. Prices in U.S.

Transcription

1 HB400 Measuring Projector 795 Electronic Micrometer 6" Combination Square 799 Electronic Caliper Prices in U.S. Dollars Assorted Saw Blades 66T Thickness Gage Precision Values

2 797 Electronic Slide Calipers with IP65 Protection Cat No. EDP Range List Sale 797B-6/ "/150mm $ $ B-12/ "/300mm Large LCD display IP65 protection against coolant, water, dirt and dust RS232 output Fine adjustment for precision measurements Long life hardened stainless steel measuring surface Manual on/off, auto off after four hours In/mm conversion Zero at any position Long life battery (>3500 hours) Resolution is.0005" (0.01mm) Includes plastic case 799 Electronic Slide Calipers Save 20% On This Page Cat No. EDP Range List Sale 799A-6/ "/150mm $ $ A-8/ "/200mm A-12/ "/300mm AZ-24/ "/600mm AZ-40/ "/1000mm 1, , Features (all sizes) Hardened stainless steel body Fine adjustment thumb wheel Zero at any position Inch/millimeter conversion Last position retained when shut off Resolution is.0005" (0.01mm) 6", 8" & 12" Calipers Only Easy-to-read LCD,.32" high characters Automatic shut-off after 5 minutes of nonuse Linear accuracy meets DIN862 Integrated depth rod Extended Range 24" & 40" Calipers Preset and hold feature Max/Min limits set I.D. jaw dimension is 0.800"/20.32mm LCD characters are.50" high Auto shut-off after 30 minutes of nonuse starrett.com 120A-6 Dial Caliper EDP: List: $ Sale: $ Sharp, clear dial graduations of.001".100" per revolution with a 6" range Sharp, black graduations on the satin finished bar Knife-edge contacts for both inside and outside measurements Hardened stainless steel bar, measuring surfaces, rack, gears, and depth rod Positive, split-gear antibacklash control 2 Specifications subject to change Sale Ends December 31, 2009

3 1202 Dial Calipers Sharp, clear dial graduations Hardened stainless steel bar, measuring surfaces, rack, gears, and depth rod Sharp, black graduations on the satin finished bar Thumb-operated fine adjustment roll Lock screws for sliding jaw and adjustable dial bezel Covered rack (4", 6" & 8") Knife-edge contacts Depth rod on all models Decimal Calipers: White Dial,.001" Graduations,.100" per revolution Fractional (F-Series) Calipers: 1/64th grad. on yellow outer scale,.01" grad. on white inner scale Cat No. EDP Range List Sale " Decimal Measurement $92.00 $ " Decimal Measurement F " Fractional & Decimal Measurement " Decimal Measurement F " Fractional & Decimal Measurement " Decimal Measurement F " Fractional & Decimal Measurement Electronic Depth Gage 123 Master Vernier Calipers Easy-to-read LCD.32" high characters Fine adjustment thumb roll Long life hardened, stainless steel bar Slide lock Linear Accuracy: ±.001" (± 0.03mm), Resolution:.0005" (0.01mm) Inch-millimeter conversion. Zero at any position. Manual ON/OFF. Auto OFF after 5 min. of nonuse Save 15% Widely-spaced,.001" (0.20mm) graduations for easy reading Easy to read black lines and figures against the Starrett satin chrome finish Screw-type nut allows for fine measuring adjustments Lock nut to hold measurements Made of the finest tool steel with hardened and stabilized bars Measuring surfaces are hardened, ground and lapped Tight, smoothly fitted slides for maximum accuracy and easy adjustment More accurate than dial or electronic slide calipers Includes finished wood case Cat. No. EDP List Sale 3753A-6/ $ $ A-8/ A-12/ Cat. No. EDP Range Bar Width Jaw Depth Nib Width Closed List: Sale: 123Z " 11/16" 1-9/16".250" $ $ Z " 15/16" 2-5/16".300" Z " 15/16" 2-5/16".300" Z " 1-3/8" 3".500" 1, , Promo 09-2 Precision Values Prices In U.S. Dollars 3

4 795 & 796 Electronic Micrometers IP67 level of protection against coolant, water, dirt and dust RS232 output on is nonoutput Balanced, tapered frame and hard, stable one piece spindle 0-1"/0-25mm range Starrett no-glare satin chrome finish on thimble and sleeve Inch/millimeter conversion Measurement HOLD button Zero tool at any position retain and return to true zero Resolution:.00005" (0.001mm) Accuracies: Inch: ±.0001", Metric: ±.002mm Large, easy-to-read LCD readout Micro-lapped carbide measuring faces Automatic OFF after 20 minutes of nonuse Cat. No. EDP Range Description List Sale 795XFL " & 0-25mm Friction Thimble, Spindle Lock, W/Output $ $ XFL " & 0-25mm Friction Thimble, Spindle Lock, No Output Cat. No. EDP Range Inch 733XFL XFLZ XFLZ XFLZ XFLZ XFLZ XFLZ XFLZ XFLZ XFLZ XFLZ XFLZ XFLZ XFLZ XFLZ XFLZ XFLZ XFLZ XFLZ XFLZ Blade Type Micrometer with non-rotating spindle Blade micrometers with non-rotating spindle Staggered lines and distinct figures on sleeve for easy, precise readability Quick-reading figures.001" graduations Rigid one-piece frame of drop forged steel with satin chrome finish starrett.com Balanced frame and thimble Hard and stable one-piece spindle Cat. No. EDP Range Grad Description List Sale 486P " $ $ P " P " P " P " P " " With Speeder 486P " P " P " P " P " P " Specifications subject to change Sale Ends December 31, 2009

5 733 Electronic Micrometers (with output) RS232 output No-glare satin chrome finish on thimble and sleeve English grads on shell and thimble Micro-lapped carbide measuring faces Automatic OFF after 30 minutes of nonuse Zero at any position retain and return to true S766AZ Electronic Tool Set (w/o output) Electronic Tool Set Electronic Caliper: 799A- Electronic Micrometer: 6/150, 0-6"/0-150mm 3734XFL-1, 0-1"/0-25mm Protective case Hard and stable one piece spindle Friction thimble and lock nut Easy-to-read LCD readout zero Inch/millimeter conversion Measurement HOLD button Resolution Approx. mm Inch mm List Sale $ $ , , All except 1" size furnished with standards. Micrometers are furnished in protective case 436 Outside Micrometers Staggered lines and distinct figures on sleeve for easy, precise readability Quick-reading figures every thousandths numbered Hard and stable one-piece spindle 7-12" models have balanced, rigid, ribbed and perforated cast iron frames RL models have ratchet stop and lock nut XRL model has ratchet stop, lock nut and lapped carbide faces S909Z Basic Precision Measuring Tool Set Three of the most commonly used precision tools Micrometer: T436.1XRL-1,.0001" grad, 0-1" range, carbide faces Dial Caliper: 120A-6, 0-6" range,.001" grad S903Z Student Tool Set Five commonly used precision tools 11H-6-4R Combination Square 120A-6, 0-6" range dial caliper C304R-6, 6" full flexible precision rule. 1/2" wide. 8ths, 16ths, 32nds & 64ths Grads C604R-6, 6" spring tempered precision rule. 3/4" wide. 8ths, 16ths, 32nds & 64ths Includes protective case 117B Center Punch 83A-6 Solid Nut Divider 1700 Student Machinist Book Includes protective case Cat No. EDP Range Grad Description List Sale 436RL " Ratchet Stop, Lock Nut $ $ RL " Ratchet Stop, Lock Nut RL " Ratchet Stop, Lock Nut " 436RL " Ratchet Stop, Lock Nut RL " Ratchet Stop, Lock Nut XRL " Ratchet Stop, Lock Nut, Carbide Faces Cat No. EDP List Sale S766AZ $ $ S909Z S903Z Promo 09-2 Precision Values Prices In U.S. Dollars 5

6 260Z Groove Micrometer Save 15% Range: 0-1" land widths, " groove widths Staggered lines and distinct figures on sleeve for easy, precise readability Quick-reading figures every thousandth numbered Hard and stable one-piece spindle Quickly and easily measure widths of internal or external grooves and lands Has a reach of 1-5/8" (41mm) maximum hole depth Each measuring disc is 9/32" (7mm) diameter and.025" (0.63mm) thick. Hardened, ground, and lapped measuring discs Will measure groove widths*.050"-1.050" Will measure land widths from 0-1" Accurate to ±.0004" Cat. No. EDP Graduation Max Hole Depth List Sale 260Z " 1-5/8" $ $ * Add.050" to No. 260Z micrometer reading 224 Interchangeable Anvil Micrometers Includes a series of easily interchangeable anvils to provide a range in steps of 1" with a single micrometer Standards included to ensure precise accuracy Wrenches included for necessary adjustments Ring-type knurled lock nut for quick and sure locking with combination ratchet and speeder for uniform pressure Staggered lines and distinct figures on sleeve for easy, precise readability Quick-reading figures every thousandth numbered Hard and stable one-piece spindle Balanced, rigid, ribbed and perforated cast iron frames With Ratchet Stop, Lock Nut, In Case No. 234 Standards Range Graduation Cat. No. EDP Furnished List Sale 224AARLZ " 1", 2", 3" $ $ ARLZ " 2", 3", 4", 5" BRLZ ".001" 6", 7", 8" GRLZ " 6", 7", 8", 9", 10", 11" CRLZ " 9", 10", 11" starrett.com 714 Electronic Interchangeable Anvil Micrometers All features of 224 Series plus electronic readout Cat. No. Large high-contrast LCD digital readout Automatic OFF after 30 minutes of nonuse Inch/millimeter conversion Ability to install minimum and maximum limits EDP Range Resolution Inch Approx. mm Inch mm 714AFLZ " mm Measurement HOLD, ability to retain and return to the true zero and PRESET to install any reading at any position RS232 output Resolution:.0001" and 0.001mm 714BFLZ " mm 1, " 0.001mm 714GFLZ " mm 1, , List Sale $ $ CFLZ " mm 1, Specifications subject to change Sale Ends December 31, 2009

7 S436.1CXRLZ Outside Micrometers Set Cat No. S436.1CXRLZ EDP: List: $1, Sale: $ Set of six micrometers, 0-6" range in 1" increments, 5 standards in wood box Staggered lines and distinct figures on sleeve for easy, precise readability Quick-reading figures.001" Grads Hard and stable one-piece spindle Ratchet stop and lock nut Carbide Faces 2700 Wisdom Electronic Indicators Glass scale design with accuracy of ± two resolutions when measuring from a known standard Rugged, sealed enclosures Selectable resolutions lower than indicator specification. Number varies by model Inch/mm conversion Plus or minus travel direction Maximum Reading Hold Zero the tool at any position of the spindle Auto OFF after 10 minutes of nonuse Three power sources operate by battery, A/C adaptor or through data port Rotating bezel RS232 output Basic Series Cat. No. EDP Range Resolution No. of Resolutions Avail. Case AGD/ Inch mm Inch mm List Sale " $ $ " " " " " AGD " " " " " " " " 25 AGD " $ " " " " $ " $ " , , " " , , " , , Rectangular Save 15% Electronic Dial Indicators AGD Group 2 Simple, powerful, easy-to-use Large, easy-to-read LCD Reverse travel, zero at any position Lug-on-center back plus additional flat back.500" or 12.7mm range 3/8" diameter stem 4-48 spindle thread Cat No. EDP Functionality Output Resolution List Price Sale Price Basic No.0005" (0.01mm) $ $ M Basic No 0.01mm Promo 09-2 Precision Values Prices In U.S. Dollars 7

8 25 Dial Indicators AGD group 2 Lug-on-center back Interchangeable contact points Easy-to-read dial Lightweight, sturdy case Shockless hardened steel gear train and jewel bearings Dial readings vary by model Available PT99356 lever control easily attached to all models for increased productivity Lever Control Cat. No. EDP Dial Reading Graduation Range List Sale One Rev. Total J $ $ " J /5J* /5J* " ".100" /5J WCSC J* J* " J WCSC PT Lever Control * Top lift-cannot use lever control 196 Universal Back Plunger Dial Indicators Accurate, reliable, and simple to operate Smooth operation and rugged, with few moving parts 1/4" Shank Diameter Listed models include clamp, tool post holder, snug, hole attachment and case Cat No. EDP Grad Range Dial Description List Sale Reading Indicator with 3 Contact 196A1Z $ $ Points, Adaptor, 4 Attachments* Antimagnetic Indicator with 3 196A6Z ".200" Contact Points, 4 Attachments* Indicator with 3 Contact Points, 196A5Z Adaptor, 4 Attachments* * Attachments include clamp, tool post holder, snug and hole attachment. Slight pull on the serrated top plate raises the spindle 1010Z has flat 1/4" contacts & measures up to.375" 1010RZ has 1/4" rounded contacts & measures up to.275" 1010 Dial Indicator Pocket Gages dial with.001" grads Small count hand to show each revolution Chrome plated case, unbreakable crystal covered dial Includes case Cat. No. EDP List Sale 1010Z $ $ RZ starrett.com 659BZ Heavy-Duty Magnetic Base Powerful magnetic base that attaches to flat surfaces or round work up to 5" (125mm) in diameter by a form-ground involute vee for accurate seating Includes inch reading No J (.0005" graduation) AGD indicator Post snug with two 3/4" (19mm) gripping holes Positions indicator at any height and vertical angle and allows for 360º rotation Fine adjustment for precise final indicator setting 3/8"-24 tapped hole on one side of the base for horizontal mounting Black wrinkle finish with precision ground contact surfaces Save 15% 657AA Magnetic Base Indicator Holder Powerful magnetic base with precision ground magnetic surfaces on three sides holds firmly to steel or iron surfaces Push-button turns magnetic force On/Off Works with most Test, AGD, Dial and Miniature-Dial Indicators Fixed upright post, 3/8" (9.5mm) diameter by 7-7/16" (190mm) long Included attachments: Snug with two 1/4" (6.3mm) holes, 1/4" (6.3mm) post and threaded end to fit lug backs, 6" (150mm), 1/4 X 6" (6.3mm) diameter rod, Snug with 1/4" (6.3mm) and 3/8" (9.5mm) holes Cat. No. EDP List Sale 659BZ $ $ Cat. No. EDP List Sale 657AA $ $ Specifications subject to change Sale Ends December 31, 2009

9 1175Z Dial Indicator Groove Gage Lightweight gage for in-process or bench inspection of oil grooves, snap ring retainer grooves, O ring seat retainer grooves and similar internal recesses. Also useful for checking bore dimensions and testing for taper, bell-mouth and out-of-roundness Movable, sensitive gaging contact has a 1/2" retractable range Transfers measurement through a linear, friction-free transfer mechanism Lower reference jaw is fixed and supports the entire weight of the gage Reference jaw can be mounted in two positions on the range adjusting bar Includes two sets of interchangeable jaws Includes three sets of hardened steel, chrome finished contacts Cat. No. EDP No. Range Dial Indicator Graduation Reading Range 1175Z ".0005" ±30.060" $1, $1, List Sale 780XT Electronic Internal Micrometers with IP65 Protection with Output Wide measurement range without changing anvils IP65 protection against coolant, water, dirt and dust Ground contact points seat the internal micrometer quickly and accurately Large high-contrast LCD digital readout reduces error RS232 output Carbide measuring faces Ratchet stop ensures consistent measurements Self-centering contacts for true readings Includes instant inch/millimeter conversion and preset + and - functions Extensions available for deep hole measuring Setting rings included Resolution as stated for each tool Numbers beginning with "S" are sets. Specific content as noted Individual 3-Point Contact 1/4-10" (6-300mm) range fixed anvils Approx. Range Accuracy Ring Diameter Cat. No. EDP No. Meas. Depth List Sale Inch mm Inch/mm Inch mm Inch mm 780XTZ /4 5/ $1, $1, XTZ /16 3/ /4 58 1, , XTZ /8 1/ , , XTZ /2 5/ / / , , XTZ / , , / XTZ / , , XTZ / , , XTZ / / , , XTZ /8 3-1/ /.005 2, , XTZ / , , XTZ , , / XTZ , , / XTZ , , XTZ /.007 3, , XTZ / , , Sets 2-Point Contact " (1-6mm) range Cat. No. EDP No. Range No. of No. of Inch mm Heads Rings List Sale S780XTBZ $6, $5, Sets 3-Point Contact 1/4-8" (6-200mm) range fixed anvils S780XTCZ /4-3/ , , S780XTDZ /8-3/ , , S780XTEZ / , , S780XTFZ , , S780XTKZ , , S780XTGZ , , IP65 Protection Promo 09-2 Precision Values Prices In U.S. Dollars 9

10 78XT Internal Micrometers Wide measurement range without changing anvils Ground contact points seat the internal micrometer quickly and accurately Resolution as stated for each tool Tungsten carbide measuring faces Ratchet stop ensures consistent measurements Self-centering contacts for true readings Blind bore measuring capability above 1/2" (12.5mm) diameter Setting rings included 2-Point Contact " range Cat. No. EDP No. Range Accuracy Approximate Measuring Depth Setting Ring Diameter Inches Inches Inches List Sale 78XTZ " 3/8.100 $1, $1, XTZ ".00010" 3/ , , XTZ " 3/ , , Point Contact 1/4-12" range 78XTZ /4 5/16" 2-1/ $ $ XTZ /16 3/8" 2-1/ XTZ /8 1/2" 2-1/ XTZ /2 5/8" 2-7/ " 78XTZ /8-3/4" 2-7/ XTZ /4 1" 2-5/ XTZ /8" 2-5/ XTZ /8 2" 3-1/ XTZ /8" 3-1/ , , XTZ /8 3-1/4".00020" 3-1/ , , XTZ /4 4" , , XTZ " , , " 78XTZ " 4-1/ , , XTZ " 4-1/ , , XTZ ".00030" 4-1/ , , XTZ " 4-1/ , , Point Contact mm range 78MXTZ mm $ $ mm 78MXTZ mm , MXTZ mm 0.005mm , , MXTZ mm 0.006mm , , MXTZ mm 0.007mm , , starrett.com 3811 Portable Hardness Tester EDP: List: $2, Sale: $2, Compact, lightweight and accurate integrated hardness tester with a wide measuring range Computes at Vickers, Brinell, Rockwell and Shore hardness values and archives data (of up to 500 groups) Built-in D impact probe with internal tungsten carbide test tip (optional probes also available) Back lighting, with LCD readout Utilizes Leeb measuring method Battery operated with automatic shut off Parts can be checked at any angle Includes case, calibrated test block and manual Error modification function Save 15% 3805A Digital Durometer EDP: List: $ Sale: $ Lightweight, ergonomically designed, reasonably priced and accurate Measures hardness in Shore A values ideal for testing rubber, PVC, leathers, vinyl, acrylic, etc. Includes RBR-63 rubber test block (Shore A 61-63) Contact is made with a 35º blunt point for accuracy Large, easy-to-read LCD display and Auto-Off Ability to allow averaging and to lock in peak value Compact size: 6.4" x 2.56" x 1.12"/163 x 65 x 28mm Accurate, repetitive deviation of HA< ±1 grade Resolution of.1ha Measuring range of 0-100HA Conforms to ASTM D-2240, ISO 7619 standards 10 Specifications subject to change Sale Ends December 31, 2009

11 781XT AccuBore Electronic Bore Gage with output Single-hand operation with right- and left-hand viewing flexibility True alignment with mechanicallydriven parallel anvils Ground contact points seat the internal micrometer quickly and accurately Large high-contrast LCD digital readout reduces error RS232 output Carbide measuring faces Blind bore measuring capability above 1/2" (12.7mm) diameter Includes instant inch/millimeter conversion Go/No Go tolerance indicator lights Extensions available up to 6" (150mm) for deep hole measuring Setting rings included Resolution:.00005" (0.001mm) Specialized heads available for thread, groove and other non-standard measurements Individual 2-Point Contact " (3-4mm) range Approx Range Accuracy Ring Diameter Cat. No. EDP No. Meas. Depth List Sale Inch mm Inch/mm Inches mm Inches mm 781XTZ /.004 1/ $3, $2, Individual 3-Point Contact 1/4-7" (6-200mm) range fixed anvils 781XTZ /8 1/ / $2, $2, XTZ /2 5/ , , / XTZ /8 3/ , , / XTZ / , , XTZ / / , , XTZ / , , XTZ / , , / XTZ /8 3-1/ / , , XTZ / / , , XTZ / , , XTZ , , XTZ / , , Pistol Grip Gage Only With Indicator* Range Cat. No. EDP No. List Sale Inch mm 781XTP / $2, $1, *Does not include heads, rings, etc Portable Surface Roughness Tester EDP: List: $1, Sale: $1, Features Economical, small, hand-held instrument for measuring surface texture conforming to traceable standards Can be used in any position on flat, outer cylinder, outer cone, grooves, and recesses greater than 3-1/4" x 1-1/4" (80 x 30mm) Large, easy-to-read LCD display External calibration of the roughness values with CAL button Battery or line cord powered Includes case, charger and roughness standard Save 15% Specifications Roughness Parameter: Ra (ISO), Rz (DIN) Measuring Range: Ra: µm / Rz: µm Cutoff Lengths: ", 0.03", 0.09" Filter: RC analog Tracing Length: 0.23" (6mm) Tracing Speed: 0.04"/second (1.0mm/second) Accuracy: Conform ISO Class 3 Pick-up Stylus: Piezo-electric Tracer Tip: Diamond, radius 10µm µm Operating Temperature: º F (0-40º C) Contact Force on Probe <1.8 ozf (<1.6 gf) Static Measuring Force on Sensor Stylus <0.06 ozf (<1.6 gf) Dimensions & Weight: 4.9" x 2.8" x 1.0" (125 x 73 x 26mm), 7 oz. (200 g) Promo 09-2 Precision Values Prices In U.S. Dollars 11

12 Save 15% 449 Micrometer Depth Gage Depth micrometer with nonrotating, blade-type rods approximately.045" thick x 1/8" wide (1.2 x 3.2mm) Blade does not turn, but moves perpendicularly only, permitting depth measurement of narrow shoulders without the blade rolling off Includes combination ratchet and speeder for uniform pressure and quick adjustment 263 Micrometer Heads 0-1" (0-25mm) range 1/2" (12.7mm) diameter clamping surface No-glare, satin chrome finish Ring-type knurled lock nut Choice of combination ratchet and speeder, or a plain micrometer head Cat. No. 263P 263L 263RL EDP Range 0 1" 0 1" 0 1" Grad.001".001".001" Description Plain Lock Nut Ratchet Stop, Lock Nut List $70.00 $75.00 $79.00 Sale $59.50 $63.75 $67.15 Cat. No. EDP Range Base Rods List Sale 449AZ-3R " 2-1/2" 3 $ $ BZ-3R " 4" BZ-6R " 4" Micrometer Heads 0-1/2" (0-13mm) range 3/8" (9.5mm) diameter clamping surface Made from rust-resistant stainless steel with reading surfaces satin finished for easy readability Ring-type knurled lock nut Choice of combination ratchet and speeder, or a plain micrometer head Cat. No. 463P 463L 463RL EDP Range 0 1/2" 0 1/2" 0 1/2" Grad.001".001".001" Description Plain Lock Nut Ratchet Stop, Lock Nut List $66.00 $70.00 $75.00 Sale $56.10 $59.50 $ Inside Micrometers.001" Grads 1/2" screw movement Includes case Includes one 1/2" micrometer head Head anvils are hardened and ground Each thousandth numbered for quick reads Hardened and ground anvils on rods, adjustable for length Insulated rod diameters approximately 1/4"/6mm for A & B and 11/32"/8.5mm for C with marked lengths 3020 Toolmakers Grade Stainless Steel Squares High quality toolmakers solid square Squareness accuracy to.0002" (0.005mm) for every 6" (150mm) Hardened, ground and lapped stainless steel construction on both the blade and the beam Beam machined at the inner corner for clearance of burr or dirt starrett.com Cat. No. EDP Movement of Screw Range No. of Rods List Sale 124AZ /2" 2 8" 6 $ $ BZ /2" 2 12" CZ " 8 32" DZ /2" & 1" 2 32" 10* *124DZ combines 124AZ & CZ with screw movements and rods 3089Z Bore Gages NEW! Ergonomic design with non-slip insulating grip Carbide contacts for extended wear All anvils laser marked for easy selection Gage chart for quick and easy anvil selection Furnished with an attractive aluminum case Resolution.0005" Cat. No. EDP Range Probe Depth Cat. No. EDP Blade Size Beam Size List Sale /32" 1-31/32" $82.00 $ /32" 2-31/32" /32" 3-29/32" /32" 6-7/8" S3020Z Set , 4, 6 & 12 in case No. of Spacers Description List Sale 11 Contacts 3089Z J " 4 $ $ " extension 6" 3089Z J " 2 10 Contacts Z J " 4 6 Contacts Specifications subject to change Sale Ends December 31, 2009

13 Granite Surface Plates and Accessories Buy any surface plate package, and receive a cover and 1 quart of cleaner FREE! Over a $75.00 Value! Plate Cover EDP Surface Plate Dimensions Grade Tolerance Stand List Sale Inches mm Inches mm Stationary $ $ A Rolling x 18 x x 450 x Stationary B Rolling Stationary x 24 x x 600 x 150 A Rolling 1, Stationary x 24 x x 600 x 100 B Rolling Stationary 1, , A Rolling 1, , x 36 x x 900 x Stationary 1, , B Rolling 1, , Starrett Webber Gage Block Sets Starrett Crystal Pink offers superior surface hardness and wear resistance the highest percentage of quartz crystals of any granite plate with smooth, jewel-like quartz bearing points Meets or exceeds 50 lb. per square foot (24kg per 1,000 sq. cm) load bearing specifications Mounted on resilient support pads, providing isolation from normal vibration and a nondistorting 3-point suspension Packed one per crate with skids for forklift handling All plates on sale are zero ledge Grade A, Inspection Grade plates are typically specified for general quality control work Grade B Toolroom plates typically specified for production checking work throughout the shop Meets or exceeds U.S. Federal Specification GGG-P-463c for flatness See Starrett Granite-related product literature for additional specifications RS 81.B B Grade Gage Block Set Tolerance of ±50 min. Etched, unique serial numbers are included on each block Certificate of Calibration with NVLAP accreditation, in accordance with ISO with dated calibration certificate and NIST traceability number Cat. No. List Sale RS 81.B $ $ RS 81.A1 1, , Measuring Range.100" " in Steps of.001".200" " in Steps of.0001" Blocks Per Set 81 RS 81.A1 Commercial Grade (Accuracy Grade 0) Gage Block Set Etched, unique serial numbers are included on each block Commercial Grade Calibration Certificate with NVLAP accreditation, in accordance with ISO with dated calibration certificate and NIST traceability number Blocks Included In Sets 9 Blocks.1001" Through.1009" (Steps of.0001") 49 Blocks.101" Through.149" (Steps of.001") 19 Blocks.050" Through.950" (Steps of.050") 4 Blocks 1.000" Through 4.000" (Steps of 1") Surface Plate Stands Constructed from welded square steel tubing for exceptional strength and durability, with steel crossbeams for extra support to ensure maximum surface plate accuracy Scratch and abrasion resistant industrial powder coated finish Stationary, with leveling adjustors Rolling stands have two stationary and two swivel casters No assembly required Promo 09-2 Precision Values Prices In U.S. Dollars 13

14 Starrett Inno S o l u t i o n s f o r l a r NEW! Electronic Groove Calipers Electronic Groove Calipers With a large range and deep jaws, our new Electronic Groove Calipers are made for measuring large-workpiece internal and external grooves. Made from hardened stainless steel and coolant resistant, they have output and work with DataSure Wireless Systems. Carbon Fiber Calipers Imagine calipers that can measure less than 7.5 pounds! In addition to Carbon Fiber Calipers have titanium for flatness and long life, are coolan output and work with DataSure Wi

15 NEW! vation g e p a r t s Carbon Fiber Calipers Electronic Depth Gages NEW! up to 60", yet weigh low weight, our new carbide-faced jaws t resistant, have reless Systems. Electronic Depth Gages With 24 capacity for depth and breadth (w/optional bridge attachment) our new Electronic Depth Gages are made for large part measurement. Made from hardened stainless steel and coolant resistant, they have output and work with DataSure Wireless Systems. For more information regarding the tools on this page, please contact your local Starrett distributor. Specifications subject to change.

16 130 Bench Level 132 Precision Bench Level with Double Plumbs 3-3/8" (85mm) in length Compact bench level Sensitive and accurate single Seasoned cast iron with black wrinkle finish Machined base leveling surface Moderately priced levels for all-around work Filigree design for lighter weight and even heat dissipation Base has an involute groove running the full length for round work All sizes have a main vial and double plumb vials vial EDP: List: $30.00 Sale: $27.30 Cat. No. EDP Inch/mm List Sale "/150mm $ $ "/225mm "/300mm "/600mm B, 79B, 83B Yankee Calipers and Dividers 73: Inside Caliper, 79: Outside Caliper, 83: Divider High-grade steel Durable flat stock legs Hardened fulcrum stud with smooth bearing surface Exceedingly strong bow spring 79B-6 Quick spring nut 73B-6 83B-6 26 Improved Firm Joint Calipers Improved joint designed tension can be adjusted as desired After adjustment has been made, tension will not change with opening and closing of the legs Actual measuring capacity about one third larger than stated leg size High-grade steel, ruggedly constructed Cat. No. EDP Inch/mm List Sale "/150mm $34.00 $ "/300mm "/450mm "/600mm "/900mm starrett.com Cat. No. EDP Inch/mm List Sale 83B "/100mm $45.50 $ B B "/150mm B B B "/200mm B B B "/300mm B Precision Universal Bevel Vernier Protractors Satin chrome finish on all reading surfaces Sharp, machine-divided graduations that read to 5 minutes (1/12 of a degree) Blades can be rotated and length adjusted, as required Dial and blade can be locked independently Flush surfaces on the base for use on height gages Fine adjustment for precision setting Cat. No. EDP Blade List Sale C359BZ " $ $ C359DZ " C359FZ " & 12" Specifications subject to change Sale Ends December 31, 2009

17 679 Inspection Scope Ideal for remote inspection of inaccessible areas such as viewing critical but hard-tosee areas during machining operations Includes a digital video camera and dimmable lighting attached to either a 3' or 6' flexible, water resistant shaft A full color image sensor and dual solid state LEDs provide imaging and illumination 2.5" full color LCD screen displays live video from the camera Includes a mirror that allows viewing 90 to the axis of the shaft, a magnet that can pick up about a quarter pound, and a rugged, protective case RCA-NTSC video output port NEW! Cat. No. EDP Description List Sale ' scope $ $ ' scope Tap Wrenches 566 Dual Vee Magnetic V-Block Strong and well proportioned Nicely finished with tempered gripping surfaces Firmly holds square or round shank taps Plunger is operated by the knurled sleeve the spring inside the sleeve causes plunger to back off when pressure is removed Cat. No. EDP Body Length Tap Size List Sale 91A "/150mm 91B "/225mm 91C "/300mm 91D "/400mm 1/16"-1/4" mm 3/16"-1/2" mm 1/4"-5/8" mm 5/16"-3/4" 8-19mm $39.00 $ EDP: List: $ Sale: $ Powerful, permanent magnet is controlled by a rotary switch Working surfaces precision ground and heat treated for long wear and stability Each block is 2-1/2" wide x 3" high x 3" long (63 x 75 x 75mm) Two precision vees will hold round stock sizes from 1/4 1-3/4"(6.4-44mm) 129 Bench Blocks EDP: List: $79.00 Sale: $68.73 Useful for holding work when driving pins, drilling, etc. Made from hardened and ground steel 162 Pin Vises Firm grip with just a few turns Hardened jaws Useful for securely holding small stock, taps, drills, reamers, scribers, wire, small files, and other tools Hole extends through the full Save 15% length of the handles Nickel-plated handles sized small enough to be rapidly rotated between thumb and finger V-groove across the face accommodates round and odd-shaped stock Knurled side provides a good gripping surface 3" (75mm) diameter x 1-1/2" (38mm) high with oversized holes from 1/8-5/8" (3-16mm) diameter and one V-Groove Cat. No. EDP Range Inch mm List Sale 162A " 0-1mm $14.00 $ B " mm C " mm D " mm Promo 09-2 Precision Values Prices In U.S. Dollars 17

18 B565 Brass Drive Pin Punches Brass construction Ideal for softer material applications where steel punches could damage workpiece Knurled finger grip All punches are 4" (100mm) long Size stamped on head SB565Z includes all eight punches in a fabric pouch NEW! B248 Brass Drive Pin Punches for machine shop and motor service work Extended length brass punches All punches are 8" (200mm) long with 3-1/2" (90mm) pin section Ideal for softer material applications where steel punches could damage workpiece Knurled finger grip Size stamped on head SB248Z includes all four punches in a fabric pouch Cat No. EDP Inch/mm Diameter List Sale Inch/mm B565A /16"/1.5mm $4.80 $3.98 B565B /32"/2.5mm B565C /8"/3mm B565D /32"/4mm "/100mm B565E /16"/5mm B565F /32"/5.5mm B565G /4"/6mm B565H /16"/8mm SB565Z Set of 8 in Fabric Pouch Length Diameter Cat No. EDP Inch/mm Inch/mm List Sale B248B /16"/5mm $ B248C /4"/6mm "/200mm B248D /16"/8mm B248E /8"/9.5mm SB248Z Set of 4 in Fabric Pouch Drive Pin Punches 117 Center Punch Set with Round Shanks Cat No. S117PC EDP: List: $30.50 Sale: $25.93 Save 15% starrett.com Hardened and tempered steel construction Knurled finger grip All punches are 4" (100mm) long Size stamped on head Cat No. EDP Inch/mm Diameter List Sale Inch/mm 565A /16"/1.5mm $4.80 $ B /32"/2.5mm C /8"/3mm D /32"/4mm "/100mm 565E /16"/5mm F /32"/5.5mm G /4"/6mm H /16"/8mm Made of specially selected hardened and tempered steel Set of 5 Nos. 117AA (1/16"), A (5/64"), B (3/32"), C (1/8") & D (5/32") Round shanks nicely finished with knurled finger grip Points ground at an angle to provide durability Accurately centered tips 18 Specifications subject to change Sale Ends December 31, 2009

19 66 Inch Reading Thickness Gages Leaves made of finest tempered-steel Each leaf is individually tested and marked with thickness Leaves easily removed or replaced Locking device allows locking one or more blades in place Rugged steel case Range: " No. 66: 26 straight leaves, 1/2" W x 3-1/32" L No. 66T: 26 tapered leaves, 1/2"-1/4" W x 3-1/32" L 666 Thickness Gage Feeler Stock in Rolls Thickness stock, housed in convenient rewindable dispenser rolls (.001" to.015") or cardboard box (.0005",.016" to.025") Cut to required length for wide variety of tasks including precise, permanent shims Made of the finest tempered steel Thickness marked every 6" Save 15% Cat. No. EDP Size Leaves List Sale /2 x 3-1/32" $49.00 $ T /2-1/4 x 3-1/32" Taper Gage EDP: List: $94.00 Sale: $79.90 One side is graduated from.010"-.150" in thousandths of an inch, the other from 0.3mm to 4mm in one-twentieth of a mm (0.05mm) S4000 Precision Steel Pin Gage Sets Plus and minus sets Pin gages are in 0.001" increments Color coded, Go/No-Go gage handle included Rugged case marked for each gage Inspection certificate included Machined to a " tolerance Pins centerless lapped and etched with size Gages are 2" long and hardened to RC 60/64 All sharp corners are broken Made of quality tool steel 7/16"/11mm W x 6-1/4"/160mm L Save 20% No. S4000 Series Pin Gages - Plus Sets Cat. No. EDP Range No. of Gages List Sale S " (+) 50 $66.00 $52.80 S " (+) S " (+) S " (+) No. S4000 Series Pin Gages - Minus Sets S " (-) 50 $66.00 $52.80 S " (-) S " (-) S " (-) S " (-) Inch Reading Rolls Dispenser Case-25' Cat No. EDP Thickness List Sale " $83.00 $ / " " / " " " " " " " " " " " " " " Inch Reading Rolls Cardboard Box-20' 666-1/ " (25' long) $ $ " " " " " " " " " " M1 All Purpose Lubricant Protects as it dries, avoiding dirt and grime Penetrates quickly to free frozen nuts and bolts Prevents rust and corrosion damage Non-soluble in water, displacing moisture to lift away from protected surface Nonconductive 12-pack or single 12oz cans Lubricates without silicone Description EDP List Sale 1-12oz can $8.20 $ oz cans Promo 09-2 Precision Values Prices In U.S. Dollars 19

20 Fastcut Variable Pitch, Fastcut with Quickshot Arbors and Straight 6-Pitch Hole Saws Hardened, heat resistant with high speed steel teeth welded to a durable alloy backing and cap Exceptionally strong and shatter resistant Effectively and economically cut a wide variety of materials 5/8" cutting depth Suitable for hand held drills or in fixed applications VH hole saws are variable pitch with a positive high rake. They are a versatile saw that provides excellent performance for a variety of applications AV saws are the same as VH but integrated with a Quickshot solid shank arbor for a 3/8" chuck SH design feature a constant, 6-pitch tooth. They smoothly cut thin cross sections of steel, sheet metal, corrugated or perforated steel, and thinner gauge applications with interrupted cuts. A constant six-pitch tooth set cuts smoothly, minimizing the tendency for the tool to bite or snag in the work piece. starrett.com Hole Saw Diameter Fastcut Variable Pitch All-purpose Hole Saw Fastcut Hole Saw w/quickshot Arbor Straight 6-Pitch Sheet Metal Saw Inch mm Cat. No. EDP List Sale Cat. No. EDP List Sale Cat. No. EDP List Sale 9/16" 14mm SH $10.00 $5.28 5/8" 16mm VH $8.80 $3.99 AVH $14.80 $7.23 SH $ /16" 17mm SH /4" 19mm VH AVH SH /16" 21mm VH SH /8" 22mm VH AVH SH /16" 24mm SH " 25mm VH AVH SH /16" 27mm VH SH /8" 29mm VH AVH SH /16" 30mm VH SH /4" 32mm VH AVH SH /16" 33mm AVH SH /8" 35mm VH AVH SH /16" 37mm AVH SH /2" 38mm VH AVH SH /16" 40mm AVH SH /8" 41mm VH AVH SH /16" 43mm SH /4" 44mm VH SH /16" 46mm SH /8" 48mm VH AVH SH " 51mm VH AVH SH /16" 52mm AVH SH /8" 54mm VH AVH SH /4" 57mm VH AVH SH /16" 59mm SH /8" 60mm VH AVH SH /2" 64mm VH AVH SH /16" 65mm SH /8" 67mm VH SH /4" 70mm VH AVH SH /8" 73mm VH SH " 76mm VH SH /8" 79mm VH SH /4" 83mm VH SH /8" 86mm SH /2" 89mm VH SH /8" 92mm SH /4" 95mm VH Save up SH /8" 98mm SH to 59% 4" 102mm VH SH /8" 105mm VH SH /4" 108mm VH SH /8" 111mm VH SH /2" 114mm VH SH /4" 121mm VH SH " 127mm VH SH /2" 140mm VH SH " 152mm VH SH /16" 160mm SH160MM /8" 168mm SH168MM /32" 177mm SH177MM /32" 210mm SH210MM Specifications subject to change Sale Ends December 31, 2009

21 High Performance for Non Metallics Unique tooth set for ultraaggressive cutting action Extended life, rapid stock removal, smooth, heat-free sawing of wood, MDF, plastics, building bricks and ceramic tiles 2-1/8" cutting depth VH SH TCT Tungsten Carbide Tipped Fastcut Multi-Purpose Hole Saws Save up to 35% Inch mm Cat. No. EDP List Sale 3/4" 19mm MPH $14.74 $ /8" 22mm MPH " 25mm MPH /16" 27mm MPH /8" 29mm MPH /16" 30mm MPH /4" 32mm MPH /8" 35mm MPH /2" 38mm MPH /8" 41mm MPH /4" 44mm MPH /8" 48mm MPH " 51mm MPH /8" 54mm MPH /4" 57mm MPH /8" 60mm MPH /2" 64mm MPH /8" 67mm MPH /4" 70mm MPH /8" 73mm MPH " 76mm MPH /8" 79mm MPH /4" 83mm MPH /2" 89mm MPH /4" 95mm MPH " 102mm MPH /8" 105mm MPH /4" 108mm MPH /8" 111mm MPH /2" 114mm MPH /4" 121mm MPH " 127mm MPH /2" 140mm MPH " 152mm MPH AV TCT Tungsten Carbide Tipped Sheet Metal Hole Saw Assemblies Assembly includes arbor, pilot drill and high performance saw Positive rake, tungsten carbide teeth Safety stop at the base of the tool prevents cutting beyond the 1/2" depth of the tool Ideal for production cutting of high alloy and stainless steels, nonferrous metals and reinforced fabrics Inch mm Cat. No. EDP List Sale 3/4" 19mm SM $36.10 $ /8" 22mm SM " 25mm SM /16" 27mm SM /8" 29mm SM /16" 30mm SM /4" 32mm SM /8" 35mm SM /2" 38mm SM " 51mm SM High Performance Triple Chip Tungsten Carbide Tipped Hole Saws Ultra-high hardness of these saws make them the ideal choice for materials too hard or too abrasive to be cut with conventional high speed steel saws These saws provide extended life when used to cut wood, PVC, man-made building materials and fiberglass Save up to 43% Inch mm Cat. No. EDP List Sale 1-1/8" 29mm CT $21.00 $ /4" 32mm CT /8" 35mm CT /2" 38mm CT /8" 41mm CT /4" 44mm CT /8" 48mm CT " 51mm CT /8" 54mm CT /4" 57mm CT /8" 60mm CT /2" 64mm CT /8" 67mm CT /4" 70mm CT " 76mm CT /4" 83mm CT /8" 86mm CT /8" 92mm CT /4" 95mm CT " 102mm CT /8" 105mm CT /4" 108mm CT /8" 111mm CT /2" 114mm CT /4" 121mm CT " 127mm CT /2" 140mm CT " 152mm CT Promo 09-2 Precision Values Prices In U.S. Dollars 21

22 Smoothcut Cordless Hole Saw Assemblies for Battery Operated Power Tools Durable bi-metal construction delivers vibration-free cutting Constant pitch set of eight teeth per inch Flared design at the base cap limits cutting depth to 1/2" Made for use with hand-held cordless drill Assembly includes hole saw, arbor and pilot drill Compatible with AQC14-38 Quick Change Connector Best for cutting mild steel sheet, plasterboard, wood and thin non-metallics Carbide Grit Hole Saws High Performance Saws for Non-Metallics Tungsten carbide grit is affixed to a tooth pattern for aggressive but smooth cutting performance Depth of cut is 1-5/8" Can operate at high speeds and will cut ceramics, glass resins, asbestos and other abrasive materials that are difficult to cut with conventional tools Save Over 55% Diameter Cat. N0. EDP List Sale 5/8" (16mm) CSC $20.61 $ /4" (19mm) CSC /8" (22mm) CSC " (25mm) CSC /4" (32mm) CSC /2" (38mm) CSC Inch mm Cat. No. EDP List Sale 1" 25mm X $38.10 $ /16" 27mm X /4" 32mm X /16" 33mm X /2" 38mm X " 51mm X /2" 64mm X Diamond Edge Hole Saws Uniform coating of synthetic diamond grit bonded to a durable steel platform provides exceptional performance at high speeds Diamond edge saws produce clean, accurate cuts and offer extended life well beyond that of conventional tools Effective cutting action on hardened steels, fired ceramics or aggregate containing (concrete), non-metallics and other difficult to cut materials Inch mm Cat. No. EDP List Sale 9/16" 14mm D $47.10 $ /8" 16mm D /4" 19mm D /8" 22mm D " 25mm D /8" 29mm D /4" 32mm D /8" 35mm D /2" 38mm D /8" 41mm D /4" 44mm D /8" 48mm D " 51mm D /2" 64mm D starrett.com Hole Saw Pilot Drills Cat. No. EDP Description List Sale A014C For all VH, AVH, SH, series hole saws $4.10 $1.90 XA014C Carbide Tipped Arbor Pilot Drills for all CT, FCW, X and D series hole saws Hidden Edge Utility Knife Blade safely tucked away when not in use, yet instantly available by releasing safety lock and squeezing lever to the knife body Thumb wheel adjustment for cutting depth Optional Belt Holster Hole Saw Arbor Extensions 12" (300mm) arbor extension Save Over 55% Cat. No. EDP Fits Chuck Fits Arbor List Sale A /2"/13mm Chuck A2, A17-12, XA2 Arbors $19.00 $8.49 A /8"/9.5mm Chuck A1, A10, A17-38 Arbors S011 Fast, tool-free blade changes Blade storage in lever 968 Cat No. EDP List Sale S $15.83 $ Specifications subject to change Sale Ends December 31, 2009

23 Hole Saw Kits Hole saw kits serve the specific needs of various trades and end use applications Kits include a range of holes saws, arbors and accessories in a rugged fitted case to hold each tool securely in place (KS288 is carded and does not include case) (A) KV290: Electricans & Plumbers Kit: 9 saws, 3/4" to 2-1/2" range, A1, A2, A5 & A7 arbors, case (A) Electricians and Plumbers Kit No. KV290 EDP: List: $ Sale: $79.95 (B) Industrial Kit No. KV291 EDP: List: $ Sale: $ Save Over 55% (D) Utility Kit No. KV1092 EDP: List: $ Sale: $54.21 (B) KV291: Industrial Kit: 11 saws, 3/4" to 3" range, A1, A2, A5 & A7 arbors, case (C) KV292: Lockset Kit: 6 saws, 7/8" to 2-1/8" range, A1, A10 & A12 arbors, case (D) KV1092: Utility Kit: 6 saws, 3/4" to 2-1/2" range, A1, A2 & A12 arbors, case (E) KV1094: Electrical Kit: 6 saws, 7/8" to 2-1/2" range, A1, A2 & A12 arbors, case (F) KV1095: Deluxe Electricans Kit: 10 saws, 7/8" to 4-3/4" range, A1, A2 & A4 arbors, case (G) KS288: Door Lock Installation Kit: 2 saws 1", 2-1/8", A1, & A12 arbors, fitted card (C) Lockset Kit No. KV292 EDP: List: $ Sale: $59.99 (E) Electrical Kit No. KV1094 EDP: Save Over 50% List: $ Sale: $62.99 Fastcut General Purpose Recip. Blades Fastcut General Purpose reciprocating blades provide a comprehensive set of sawing solutions to professional trades people and do-it-yourselfers B blades are straight with a thickness of.035" BT blades are tapered with a thickness of.050" 3/4" wide Cat. No. EDP Length TPI Blades List Sale B " 18 2 $5.80 $5.29 B " B " B " B " B " B " B " B " B " B " B " SB6-A " Blade Assortment: Includes one each: B66, B610, B614, B618 & B BT " BT " BT " BT " BT " BT " BT " BT " BT " BT " BT " BT " BT " BT " BT " BT " BT " King Cut Fire, Rescue and Demolition Reciprocating Blades Bright fluorescent yellow paint and unique marking system Bi-metal construction for improved strength and blade life Vacuum hardened high speed steel cutting edge delivers rapid cutting action Save over 20% (F) Deluxe Electricians Kit No. KV1095 EDP: List: $ Sale: $ (G) Door Lock Installation Kit No. KS288 EDP: List: $36.90 Sale: $35.29 Cat. No. EDP Dimensions TPI Shape Blades List Sale BTR " x 1" x.063" 6-10 Tapered 2 $11.50 $8.99 BR Straight " x 3/4" x.050" BR Straight BR " x 3/4" x.050" Straight Promo 09-2 Precision Values Prices In U.S. Dollars 23

24 Unified Shank Jig Saw Blades The only blades that fit both Universal and Bosch tools Exclusive, patented design that eliminates the need to stock and use two different blades for the same job Starrett exclusive bi-metal unique process provides less breakage, faster cutting, and longer blade life EXCLUSIVE Dual Cut Jig Saw Blades Wood-cutting saw with teeth in both directions Save up to 37% Cat. No. EDP Dimensions TPI Tooth Set Blades List Sale BU " x 5/16" x.050" 6 Skip Alternate 2 $4.85 $4.29 BU " x 5/16" x.050" 8 Regular Alternate BU310T " x 5/16" x.050" 10 Ground Tapered BU310DT " x 5/16" x.050" 10 Ground Tapered, Downstroke Cut BU36T " x 5/16" x.050" 6 Ground Tapered BU " x 5/16" x.050" 6 Skip Alternate BU " x 3/8" x.050" 6 Skip Alternate BU310T " x 5/16" x.050" 10 Ground Tapered BU " x 5/16" x.040" 24 Regular Wavy BU224S " x 3/16" x.040" 24 Scroll Wavy BU " x 5/16" x.040" 32 Regular Wavy BU " x 5/16" x.040" 14 Regular Wavy BU " x 5/16 x.040" 18 Regular Wavy BU " x 3/8" x.040" 14 Varipitch Wavy BU " x 5/16" x.040" 14 Regular Wavy BU " x 5/16 x.040" 18 Regular Wavy BU230X " x 5/16" x.040" Continuous Coarse Carbide Grit BU310DT " x 5/16" x.050" 10 Ground Tapered, Downstroke Cut BU Wood Cutting Assortment Pack: 1 each, BU36, BU46, BU38, BU310T & BU214S BU Multi-Purpose Assortment Pack: 1 each, BU46, BU310T, BU214, BU224S & BU BU Metal Cutting Assortment Pack: 1 each, BU41014, BU214, BU224, BU224S & BU Length dimension references tooth-bearing section of jig saw. The total length, including blade tang, is approximately 1" longer. Burr-free cut on both sides Starrett-exclusive Unified Shank allows use with both Universal and Bosch tools bi-metal unique blades cut faster and last longer with 170% greater resistance to tooth breakage 2" is a scroll-cutting blade 2 blades per pack Cat. No. EDP Length List Sale BU3DC " $6.10 $5.99 BU2DCS " Closed Grip Heavy Duty High-Tension Hacksaw Frames Cat No. K145 EDP List: $35.00 Sale: $19.99 Save Over 40% Professional quality hacksaw frame Closed grip, heavy duty, high-tension 12" (300mm) frame with 4-3/8" (110mm) throat depth Includes Starrett bi-metal unique blade Convenient, efficient adjustment lever Ergonomic rubber handle and comfortable thumb hold Four permanently angled mounting pins for both straight and angle cutting bi-metal unique High Speed Steel Safe-Flex Hacksaw Blades starrett.com Exclusive, patented solid-state diffusion process produces 170% more high-speed steel weld area and precision ground tooth profile Blades cut faster and last longer Cat. No. EDP Length TPI Blades List Sale KBS " 24 2 $3.40 $2.49 KBS1218-2A " KBS1224-2A " KBS1232-2A " KBS " KBS " KBS " BS " BS " BS " Closed Grip Light Duty Hacksaw Frame Cat No. K140 EDP List: $12.80 Sale: $7.99 Accepts 12" (300mm) blades Includes Starrett bi-metal unique blade 24 Specifications subject to change Sale Ends December 31, 2009

25 MY1-25 Starrett Tough Tapes High visibility, impact resistant rugged yellow case Ergonomic over-molded soft grip Blade lock and 1" blade MY has 1.09" blade ProSite Tapes Durable, visible and impact resistant yellow case Aluminum Straight Edge & Aluminum Rules Anodized aluminum with smooth edges Parallel, accurate, and flexible ths Inch graduations 8 and 16 ths ASE Series: 2" (50mm) wide and.081" (2.1mm) thick Measure Stix Sticks to almost any work surface AR Series: 1-1/8" (30mm) and.075" (1.9) thick AR2: Ruled on both sides Large, easy-to-read numbers XY1-25 Non-slip over-molded grip Robust, cam-operated lock Heavy-duty, nylon coated 1" blade with Tough Tip blade protector and shock-absorbing blade bumper High quality precision steel rule is flat with permanent adhesive backing Cut to size with scissors and mount on work-benches, saw tables, drafting tables, etc. 1/2" wide S1 Grads - Feet, Inches, 1/16" Sticks to almost any work surface Tru-Lok Tapes Heavy-duty 1" blades with Tough Tip blade protector SK1 Key Caddy 21" stainless steel chain and large key ring Heavy-duty die-cast case with belt clip C1-25 Rugged chrome case Positive blade lock until lock button is released S11 Scale Fractional Scale S1 Scale S12 Scale Cat. No. EDP Description List Sale MY ' Tough Tape, S1 Grads $10.37 $5.99 MY1-25F ' Fractional Reading Tough Tape MY ' Extra Wide Tough Tape, S1 Grads MY ' Tough Tape, S1 Grads MY1-8ME m/26' Tough Tape, S9 Grads XY ' ProSite Tape, S1 Grads XY ' ProSite Tape, S1 Grads C ' English Tape, Tru-Lok Tape, S1 Grads, Chrome CH1-8ME m/26' Metric Tape, Tru-Lok Tape, S12 Grads, Charcoal FS Professional Framing Square One-piece tempered steel, 24" x 2" body and 16" x 1-1/2" tongue Face and back stamped with 1/8" graduations Clear rust resistant coating Save 20-42% Cat. No. EDP Description List Sale RSS " Professional Rafter Square $23.37 $16.99 FS " Professional Framing Square Auto-return Cat No. EDP Length List Sale ASE " $7.51 $5.99 ASE " ASE " AR " AR " SM412W ' Left - Right SM412WRL ' Right - Left SM44W ' Left - Right SM46WRL ' Right - Left SK " RSS Rafter Square Solid, one-piece tempered steel, 24" x 2" body and 16" x 1-1/2" tongue Permanently stamped with 1/8" and 1/16" graduations on face, 1/10", 1/12" and 1/16" on rear Rafter information and an octagonal measuring scale on the face Wood screw, pilot drill, and board foot and brace information on Promo 09-2 Precision Values Prices In U.S. Dollars rear FS RSS 25

26 MPH Master Pro Hardwood Levels Select hardwood reinforced with aluminum I-beam frame 4 plumb, 2 level vials Tough, oversized yellow vials with large bubbles and clear lines Shock-absorbing end caps PLM Torpedo Levels Precision molded, high-impact styrene frame Magnetic base BB Brass Bound Professional Hardwood Levels Select hardwood reinforced with doubleangle brass bindings and brass edges 4 plumb, 2 level vials Tough, yellow vials with large bubbles and clear lines Shock-absorbing end caps V-grooved top edge Neon orange or yellow available Save up to 41% BXY ProSite Professional Box Beam Aluminum Levels High strength, high profile, heattreated aluminum with railed ribs Easily replaceable vials Over-molded end caps 24": 2 plumb, 1 level vials 48": 2 plumb, 2 level vials Cat. No. EDP List Sale MPH $ $44.99 MPH BB BB BXY BXY PLMY PLMO starrett.com Cat. No. EDP Description List Sale Chalk Products CL '/42m ProSite Super Chalk Box $41.69 $25.99 SACLY '/30m Reel Fast Without Chalk SACLY100B '/30m Reel Fast With 4oz. Chalk, Blue SACL100B '/30m Reel Fast With 4oz. Chalk, Blue SC8B oz. (227g) Blue Chalk SC8R oz. (227g) Red Chalk SC8W oz. (227g) White Chalk SC8G oz. (227g) Green Chalk SC8O oz. (227g) Fluorescent Orange Chalk SUC8B oz. (227g) Permanent Blue Chalk SUC8BLK oz. (227g) Permanent Black Chalk SUC8R oz. (227g) Permanent Red Chalk SC5B lbs. (2.27kg) Blue Chalk SC5R lbs. (2.27kg) Red Chalk SC5W lbs. (2.27kg) White Chalk SC5G lbs. (2.27kg) Green Chalk SC5O lbs. (2.27kg) Fluorescent Orange Chalk SUC5B lbs. (2.27kg) Permanent Blue Chalk SUC5BLK lbs. (2.27kg) Permanent Black Chalk SUC5R lbs. (2.27kg) Permanent Red Chalk Flagging Tape RFG ' Roll, Lime $3.05 $1.49 RFO ' Roll, Orange RFP ' Roll, Pink RFB ' Roll, Blue RFR ' Roll, Red RFY ' Roll, Yellow Stake Flags FLG-LG Bundle of 100, Lime Glow $12.14 $7.99 FLG-O Bundle of 100, Orange FLG-OG Bundle of 100, Orange Glow FLG-PG Bundle of 100, Pink Glow FLG-RG Bundle of 100, Red Glow Barricade Tape and Dispensers RBC Yellow 3" x 300' English/Spanish $7.36 $4.99 RBD DANGER Tape, Red 3" x 300' RBCA Yellow 3" x 300' English/French RBC Yellow, 3" x 1000' English/Spanish RBD DANGER Tape, Red 3" x 1000' RFD12-R DANGER Flag, Red, 300' ROLL BTD Barricade Tape Dispenser for 300' & 1000' Rolls Chalk Products and Flagging Tape ProSite Super Chalk Reel Fast Box Fast rewind up to High capacity Super 3-1/2 times faster than Chalk Box holds 1 lb. 12 other products oz of powdered chalk Fast, easy push-button 140' of line line release High-impact Large chalk capacity yellow and an easy pop-in line plastic case Chalk Refills Highest quality, specially formulated, powdered chalk colored to mark distinctly Lays down a hard, clean line that won t blow away Packaged in easy-touse plastic bottles with no-spill cap For use in all chalk line reels Flagging Tape Durable outdoor flagging tape Extremely visible Non-flammable Stake Flags Highly visible Flag glued to stake, tear resistant in high wind conditions 2.5" x 3.5" flags on a 21" stake refill Locking handle allows tool to be used as a plumb bob High-impact durable yellow plastic case, SACL100B has chrome case SACL100B and SACLY100B include chalk Barricade Tape Highly visible Outdoor durability Bilingual tapes offered as noted Barricade Tape Dispenser Fits 300' and 1000' rolls with cut off surface One handed use 26 Specifications subject to change Sale Ends December 31, 2009

27 29" (737) 8" (203) 5" (127) HB400221E Optical Projector 16" (400mm) diameter screen with crosshairs and calibration marks Heavy-duty, metal construction 12" x 6" (300 x 150mm) measuring range 21.25" x 5.125" (540 x 130mm) staging area with dual holding slots 110 lb. (50 kg) weight capacity Dual intensity (hi/low) tungsten halogen profile illumination Twin-bundle, adjustable on-axis, fiber optic surface illumination Quick-change, bayonet style lens mount Digital protractor with DD/DMS conversion Heidenhain.00005" (0.001mm) resolution scales Centrally mounted vertical (Y-axis) scale (inline with lens/workpiece) Threadless X-axis quick release for zero backlash 41" (1041) HB400 43" (1092) Includes a QuadraChek QC221 Readout with Optical Edge detection Versatile display console with high-visibility LCD display Resolution " (0.001 mm) Inch/metric conversion, incremental or absolute measurement and Zero reset Linear error compensation Q-Axis display Skew function for rapid part alignment correction Single key calculation for angles, radius/ diameter, distance, etc. Display in either polar or Cartesian coordinates 200 point feature memory (stored or displayed) RS232C serial port and parallel port Includes automatic edge detection Automatic point entry reduces operator subjectivity and fatigue Achieve higher throughput, more accurate measurements, and more consistent data Bundled with a Special Productivity Package that includes: 10X, 20X, or 25X Lens Choice of a 4H " Rotary Vise or 4H004 Rotary V Block 4U000 Precision Glass Graticule Spare Surface and Profile Bulbs P " Cabinet You Save $1, Suggested Retail Price: $16, Sale Price for System with Productivity Package: $15, Promo 09-2 Precision Values Prices In U.S. Dollars 27

28 Fall/Winter 2009 Tool Sale Specifications subject to change. Sale ends December 31, 2009 Prices in U.S. Dollars 100M/Q 07/09 Promo 09-2