Promo No. 86 Prices valid April 1, 2008 September 30, 2008

Transcription

1 Promo No. 86 Prices valid April 1, 2008 September 30, 2008

2 797 Series Electronic Slide Calipers with Output & IP65 Protection 6"/150mm Caliper In/mm conversion Zero at any position Standard RS232 output Large, easy-to-read LCD display IP65 level of protection against coolant, water, dirt and dust Resolution is.0005" (0.01mm) Induction type linear encoder system Fine adjustment for precision measurements Long life hardened stainless steel measuring surface Manual on/off, auto off after four hours Lock to hold the slide in position Linear accuracy meets DIN862 Long life battery (>3500 hours) Includes plastic case IP65 protection against Coolant, Water, Dust & Dirt 8"/200mm Caliper List Sale Cat. No. EDP Range Price Price 797B-6/ "/150mm $ $ B-8/ "/200mm B-12/ "/300mm "/300mm Caliper Right: 797 with a DataSure End Node for wireless data collection Below: 797 has IP65 protection against coolant, water, dust & dirt. 2 Promo # Mid-Year Tool Sale. Prices in U.S. Dollars & valid April 1 through Sept. 30, 2008.

3 799 Series Electronic Slide Calipers 6"/150mm Caliper 8"/200mm Caliper 24"/600mm Caliper List Sale Cat. No. EDP Range Price Price 799A-6/ "/0-150mm $ A-8/ "/0-200mm A-12/ "/0-300mm AZ-24/ "/0-600mm Features (all sizes) Lightweight, ergonomic design Inch/millimeter conversion reads.0005" or 0.01mm Last measuring position retained when shut off Hardened stainless steel body for long life Fine adjustment thumb wheel Lock screw to hold the slide in position Resolution is.0005" (0.01mm) Zero at any position 6", 8" & 12" Calipers Only Easy-to-read LCD,.32" high characters Automatic shut-off after 5 minutes of nonuse Linear accuracy meets DIN862 Integrated depth rod Extended Range 24"Caliper Preset and hold feature Max/Min limits set I.D. jaw dimension is 0.800"/20.32mm LCD characters are.50" high Auto shut-off after 30 minutes of nonuse Several of the products in this flyer, including the calipers on this page, are accompanied by our Global Series symbol. Starrett has manufactured products worldwide for over 50 years, and now some of these products are available in the U.S.A. as the Global Series. Regardless of country of origin, the Starrett brand means of precision, quality and value. See for complete product information. Specifications subject to change. 3

4 1202 Series Dial Calipers Save up to $64.56 Above: 0-8" Decimal Caliper Sharp, clear dial graduations Hardened stainless steel bar, measuring surfaces, rack, gears, and depth rod Sharp, black graduations on the satin finished bar Positive, spring-loaded double pinion anti-backlash control 0-6" Fractional & Decimal Caliper with fractions on the outer yellow dial and decimals on the inner white dial (right) Thumb-operated fine adjustment roll Lock screws for sliding jaw and dial adjustable bezel Covered rack depth rod (4", 6", 8") Knife-edge contacts Decimal Calipers: White Dial,.001" Grad; 100" Per Revolution Fractional (F-Series) Calipers: 1/64th grad. on yellow outer scale,.01" grad. on white inner scale Cat. No. EDP Range List Price Sale Price ", Decimal measurement $86.00 $ ", Decimal measurement F ", Fractional & Decimal measurement ", Decimal measurement F ", Fractional & Decimal measurement ", Decimal measurement F ", Fractional & Decimal measurement Series Vernier Calipers List Sale Cat. No. EDP Range Price Price 125MEA-6/ "/150mm $86.00 $ MEA-8/ "/200mm MEA-12/ "/300mm High quality basic vernier caliper English and metric measurement Lock screw for sliding jaw Hardened stainless steel depth rod Grads:.002" English, 0.02mm metric Sharp, black grads. on the satin finished bar 4 Promo # Mid-Year Tool Sale. Prices in U.S. Dollars & valid April 1 through Sept. 30, 2008.

5 795/796 Series Electronic Micrometers with IP67 Protection Left: 796 Micrometer Left: 795 Micrometer with output IP67 level of protection against coolant, water, dirt and dust RS232 output port for data transmission to Starrett DataSure Wireless Data Collection Systems or wire-based data systems. 796 is non-output Balanced, tapered frame Listed models have a range of 0-1"/0-25mm Starrett no-glare satin chrome finish on thimble and sleeve Hard and stable one piece spindle Large, easy-to-read LCD readout Micro-lapped carbide measuring faces Automatic OFF after 20 minutes of nonuse Inch/millimeter conversion Above: 795 with a DataSure End Node for wireless data collection Cat. No. EDP Description List Price Sale Price 795XFL Friction Thimble, Spindle Lock, W/Output XRL Ratchet Stop, Lock Nut,W/Output XFL Friction Thimble, Spindle Lock, No Output XRL Ratchet Stop, Lock Nut, No Output XFL-1 Electronic Micrometer EDP: List: $ Sale: $ NEW Measurement HOLD button Zero tool at any position retain and return to true zero Resolution:.00005" (0.001mm) Accuracies: Inch: ±.0001",Metric: ±.002mm Range: 0-1"/0-25mm No-glare satin chrome finish on thimble and sleeve Balanced, tapered frame English grads on shell and thimble Hard and stable one piece spindle Friction Thimble and Lock Nut Easy-to-read LCD readout Micro-lapped carbide measuring faces Automatic OFF after 30 minutes of nonuse Zero at any position retain and return to true zero Inch/millimeter conversion Measurement HOLD button See for complete product information. Specifications subject to change. 5

6 Set includes 0-1", 1-2", and 2-3" micrometers in a wood case.0001" is read from the sleeve.001" is read directly from the counter Clear, easily read numbers Balanced frame design and hard and stable one-piece spindle Ratchet stop, lock nut, and standards Micro-lapped carbide measuring faces Outside Micrometers 230, 231 and 226 Series Micrometers share the following features: Advanced sleeve design with staggered lines and distinct figures for precise and easy readability Balanced frame and thimble for easy handling and readability Quick-reading figures every thousandths numbered Satin chrome finish no glare resists rust Ring-type knurled lock nut for quick and sure locking A combination ratchet and speeder for uniform pressure and quicker adjustment on all sizes Hard and stable one-piece spindle 230 Series Micrometer Rigid one-piece frame of drop forged steel Spindle and anvil are.235" (6mm) and the frame is tapered for use in narrow slots and tight places Convenient decimal equivalents on frame Tapered frame for use in narrow slots and tight places Micro-lapped carbide measuring faces 231 Micrometer Extra heavy with thermal insulators Rigid one-piece frame of drop forged steel Micro-lapped carbide measuring faces 226 Series Micrometers Hard and stable one-piece spindle Rugged frame ribbed for extra strength with smooth black enamel finish and polished ribs and hub Micro-lapped measuring faces ST216AXRLZ Digital Micrometer Set EDP: List: $ Sale: $ " 230 Series Micrometer 0-1" 231 Series Micrometer 1-2" 226 Series Micrometer Cat. No. EDP Range Grads. List Price Sale Price T230XRL ".0001" $ $ T231XRL ".0001" RL ".001" RL ".001" Promo # Mid-Year Tool Sale. Prices in U.S. Dollars & valid April 1 through Sept. 30, 2008.

7 Inside Micrometer Sets with Extended Travel Wide measurement range fewer anvil changes Resolution from.0001" (0.0025mm) on 2-point contact tools up to 1/4" (6mm) and.0002" (0.005mm) on 3-point contact tools ranging from 1/4"-12" (6mm - 300mm) Ground contact points seat for faster, more accurate seating than the spherical contacts Tungsten carbide measuring faces on all 3-point heads above 1/2" (12.5mm) Ratchet stop ensures consistent measurements Self-centering contacts for true readings Setting rings included Blind bore measuring capability above 1/2" (12.5mm) diameter Sets include wooden case for heads, rings and accessories Cat. No. EDP Range Contact Points Heads Rings List Price Sale Price S78XTBZ "-.250" $3, $3, S78XTCZ /4"- 3/8" , S78XTDZ /8"- 3/4" , , S78XTEZ /4"- 2" , , S78XTFZ "- 4" , , Series Inside Micrometers Solid Rod-type in case.001" Grads. 1/2" screw movement Hardened and ground anvils on rods, adjustable for length Head anvils are hardened and ground Each thousandth numbered for quick reads Includes case Includes one 1/2" micrometer head Insulated rod diameters approximately 1/4"/6mm for A & B and 11/32"/8.5mm for C with marked lengths Cat. No. EDP Movement of screw Range No.of Rods List Price Sale Price 124AZ /2" 2-8" 6 $ $ BZ /2" 2-12" CZ " 8-32" DZ /2" & 1"* 2-32" 10* *124DZ combines 124AZ & CZ with screw movements and rods from each See for complete product information. Specifications subject to change. 7

8 S766BZ Electronic Tool Set (w/output & IP protection) EDP: List: $ Sale: $ Electronic Micrometer: 795XFL-1, 0-1"/0-25mm, w/output & IP67 Protection IP65 Electronic Caliper: 797B-6/150, 0-6"/0-150mm, w/output & IP65 Protection Protective case S766BZ S905AZ S905AZ Measuring Tool Set EDP: List: $ Sale: $ Micrometer: T231XRL, 0-1", Carbide Faces Dial Slide Caliper: 120A-6, 0-6" Dial Indicator: 711FSA Last Word,.001" grads, w/universal shank Precision Rule: C604RE-6, 6" x 3/4", Spring Tempered, 1/8th/16th/32nd/64th Protective case S766AZ Electronic Tool Set (w/o output) EDP: List: $ Sale: $ Electronic Micrometer: 734XFL-1, 0-1"/0-25mm Electronic Slide Caliper: 799A-6/150, 0-6"/0-150mm Protective case S766AZ Global Series 8 Promo # Mid-Year Tool Sale. Prices in U.S. Dollars & valid April 1 through Sept. 30, 2008.

9 Depth Micrometers 749 and 445 Series Depth Micrometers include the following features: Combination ratchet and speeder, ratchet stop and lock nut Depth Micrometer heads are accurate to ±.0001" 4" Base and 5/32" Rod Diameter Depth Micrometer, rods and accessories in case 749BZ Electronic Depth Micrometer Easy-to-read, LCD readout with auto OFF after 30 minutes of nonuse Inch/millimeter conversion and Measurement HOLD button Zero tool at any position retain and return to true zero RS232 output port for data transmission to Starrett DataSure Wireless Data Collection Systems and wire-based data systems 749BZ-6RL Electronic Depth Micrometer Cat. No. EDP Range Rods List Price Sale Price 749BZ-6RL "/0-150mm 6 $ $ BZ-12RL "/0-300mm BZ-3RL " BZ-6RL " BZ-9RL " AZ-3RL Depth Micrometer 450 Series Depth Gages Accurate for measurements to.001" Lock screws for dial bezel and for holding the measuring rod in position " dial grads per/revolution w/bar grads. every.100" Removable hook attachment for readings from the edge of workpiece to edges Positive split gear anti-backlash control Hardened, stainless steel base, measuring bar, rack and gears 3753 Electronic Depth Gage NEW Easy-to-read LCD.32" high characters Fine adjustment thumb roll Long life hardened, stainless steel bar Lock to hold the slide in position Linear Accuracy: ±.001" (± 0.03mm), Resolution:.0005" (0.01mm) Inch-millimeter conversion. Zero at any position. Manual ON/OFF. Auto OFF after 5 min. of nonuse List Sale Cat. No. EDP Range Price Price " $ $ " A-6/ "/0-150mm See for complete product information. Specifications subject to change. 9

10 3752 Electronic Height Gages Full featured, versatile and economic solution for most applications Large positive action keypad.380"/9.65mm LCD display reads to.0005" or 0.01mm Clear.100"/5mm bar grads Inch-millimeter conversion Carrier and scriber can read from zero Retains reading at any position Plus or minus indication Set zero or any reading at any position Install minimum and maximum limits Retain and return to the true zero Manual on/off and auto off after 30 of minutes of nonuse RS232 output port for data transmission to Starrett DataSure Wireless Data Collection System or to wire-based data systems Right: "/300mm Electronic Height Gage Left: 3752, 0-24"/600mm Electronic Height Gage Cat. No. EDP Range Case List Price Sale Price / "/0-300mm No $ $ / "/0-600mm No 1, NEW Left: 3751 Electronic Height Gage 3751AZ-6/150 Electronic Height Gage EDP: List: $ Sale: $ "/0-150mm range Rounded nose scriber cuts clean, sharp lines Easy-to-read LCD with.32" high characters Inch-millimeter conversion & Zero at any position Manual ON/OFF w/auto OFF after 5 min. of nonuse Hardened stainless steel bar for long life Scriber can reference zero from the base bottom Slide lock & Fine adjustment thumb roll Hardened, ground, and lapped base Linear Accuracy: ±.001" (± 0.03mm) Resolution:.0005" (0.01mm) 10 Promo # Mid-Year Tool Sale. Prices in U.S. Dollars & valid April 1 through Sept. 30, 2008.

11 2600 Series Electronic Indicators AGD Group 2 AGD Size Group 2 1" (25mm) range Readout available to.0005" and 0.01mm Large, easy-to-read LCD readout Lug-on-center back Rugged, sealed enclosure Utilizes standard indicator accessories and holding devices Basic Function Features Inch/mm conversion Zero at any position Plus/minus control to indicate direction ON/OFF control with auto off after 1 hour of nonuse Zero references retained when off Full-Function Features All Basic features plus: Bezel rotates for easy reading Ability to retain and return reading to the original zero reference (zero absolute [ABS]) Min/Max/TIR retains lowest & highest readings in a group & shows the difference between them Cat. No. EDP Functionality Output Resolution List Price Sale Price Basic No.0005"/0.01mm $ $ Basic No.001"/0.02mm Basic Yes.0005"/0.01mm Full Yes.0005"/0.01mm Full Yes.001"/0.02mm Series Electronic Indicators AGD Group 2 Both Models Simple, powerful,easy-to-use AGD group 2 size Large, easy-to-read LCD On/Off button Reverse travel (± control indicates direction) Zero setting at any position Lug-on-center back plus additional flat back Left: Full Feature Electronic Indicator with a DataSure End Node Right: Basic Feature Electronic Indicator Ability to enter low and high limits for tolerance control Ability to install any reading at any point in the display Output Models Output models include RS232 port for data transmission to Starrett DataSure Wireless Data Collection or wire-based data systems Inch/Metric (3600-5) Model 3/8" diameter stem 4-40 spindle thread Range:.500"/12.7mm Resolution:.0005"/0.01mm Metric Only (3600M-5) Model 8mm stem M2.5 X.45 spindle thread Range: 12.7mm Resolution: 0.01mm Cat. No. EDP Description List Price Sale Price Inch/Metric $ M Metric See for complete product information. Specifications subject to change. 11

12 708 Series Dial Test Indicators Angled head for better reading position Large 1-3/8"/35mm diameter dial Contact point reverses automatically, always maintaining clockwise hand rotation Precision gear-driven design with smooth, jeweled movement Narrow body for in reach ability Satin chrome finish for durability Frictionally adjustable and replaceable carbide contacts Contact length: 13/16"/20mm, Ball Diameter:.078"/2mm Three dovetail positioning mounts work with existing test indicator accessories 708ACZ & 708AZ: English reading & white dial 708MAZ: Metric reading and yellow dial 708ACZ includes: Dovetail Body Clamp, Swivel Post Snug with Dovetail Indicator Clamp, Tool Post Holder, Snug and Rod Unit Fitted case included Right: 708MAZ Below: 708AZ Below: 708ACZ Cat. Dial List Sale No. EDP Range Grads. Reading Price Price 708ACZ ".0001" $ $ AZ ".0001" MAZ mm 0.002mm Series Back Plunger Dial Indicators Inch Reading.001" Grad..200" range reading 1/4" Shank Diameter Accurate, reliable, and simple to operate Rugged, with few moving parts Smooth in operation 196A1Z Indicator with adaptor & attachments Cat. No. EDP Description List Price Sale Price 196A1Z Indicator w/3 Contact Points, Adaptor, 4 Attachments, In Case $ $ B Indicator w/3 Contact Points and Adaptor Only Promo # Mid-Year Tool Sale. Prices in U.S. Dollars & valid April 1 through Sept. 30, 2008.

13 AGD Dial Indicators with Lever Control Right J, AGD 4 Indicator Below: J, AGD 3 Indicator PT99356 Lever Control EDP: List: $21.00 Sale: $18.20* 81, 25, 655 & 656 indicators feature: Lug-on-center back Interchangeable contact points Easy-to-read dial style Lightweight, sturdy case Shockless hardened steel gear train and jewel bearings Nos /5J WCSC & J WCSC include a Case Stem Cap Indicator and lever will be shipped together as separate items. Lever installation is very simple and is easily accomplished within a few minutes. Instructions are included Left: J AGD 2 Indicator Right: J AGD 1 Indicator All listed indicators are available at the sale price only when purchased with a Lever Control, PT99356, EDP: AGD 1: 1-11/16" / 43mm Diameter AGD 2: 2-1/4" / 57mm Diameter AGD 3: 2-3/4" / 70mm Diameter AGD 4: 3-5/8" / 92mm Diameter Cat. No. EDP AGD Group Range Grad. Dial Reading List Price Sale Price* Indicator + Lever* J ".001" $ $ $ J ".001" J ".001" J ".001" /5J WCSC ".001" J WCSC ".001" J ".001" J ".001" J ".001" J ".001" *All listed indicators are available at the listed sale price only when purchased with a Lever Control, PT99356, EDP: Note: /5J WCSC & J WCSC include a Case Stem Cap. See for complete product information. Specifications subject to change. 13

14 657AA Fixed Base Indicator Holder EDP: List: $ Sale: $ Powerful, permanent magnetic base with precision ground magnetic surfaces on three sides holds firmly to steel or iron surfaces Push-button turns magnetic force on or off for quick, one-hand set-up and take-down For use with all Starrett Test, AGD, Dial and Miniature-Dial Indicators and similar indicators from other manufacturers Fixed upright post, 3/8"/9.5mm diameter by 7-7/16 /190mm long Includes full range of attachments: 1) Snug with two 1/4" (6.3mm) holes 2) Indicator attachment for 1/4" (6.3mm) post and threaded end to fit lug back on indicators 3) 6" (150mm), 1/4" (6.3mm) diameter rod 4) Snug with 1/4" (6.3mm) and 3/8" (9.5mm) holes 660 Magnetic Base Indicator Holder EDP: List: $ Sale: $90.67 Magnetic base indicator holder with triple-jointed arm Small, powerful magnetic base, with 70 lbs. (320 N) holding force Three adjustable pivots controlled by a single knob for fast, easy indicator positioning Positive On/Off switch Base Dimensions: 1-3/16" x 1-9/16" x 1-3/8" 25R Contact Point Set EDP: List: $93.00 Sale: $82.67 One Regular Point Nine Special Form Points Three Extra-Long Points Shock Absorbing Anvil With 4-48 thread to fit AGD indicators (30mm x 40mm x 35mm) Horizontal and vertical mounting positions Will hold any indicator with a 3/8" (9.5mm) stem or standard dovetail mount Maximum Horizontal Reach: 4.750" (120mm); Maximum Vertical Reach: 7.500" (190mm) Very sensitive fineadjustment thumb screw 14 Promo # Mid-Year Tool Sale. Prices in U.S. Dollars & valid April 1 through Sept. 30, 2008.

15 84 Series Dial Bore Gages Gages are well balanced and easy to use Can be easily held to inspect bores and hole sizes without removing the workpiece An adjustable range screw and two centralizing plungers provide accurate, three-point contact for tool alignment in larger bores All contacts and centralized plungers are of hardened tool steel for wear and spring-loaded for sensitivity The housing and knurled handle are aluminum for light weight and good balance Dial indicators have jewel bearings for sensitivity With finished wood case Right: 84Z-111-4J Right: 84Z-111-7J Cat. No. EDP Range Bore Depth Grad List Price Sale Price 84Z-111-4J /2" 3" 4".0001" $ $ Z-111-5J " 5-3/16" 5".0001" Z-111-6J " 8-1/8" 6".0001" Z-111-7J " 12-1/8" 7".0001" Z-134-4J /2" 3" 4".0005" Z-134-5J " 5-3/16" 5".0005" Z-134-6J " 8-1/8" 6".0005" Z-134-7J " 12-1/8" 7".0005" See for complete product information. Specifications subject to change. 15

16 1015 Series Dial Thickness Gages Measuring pressure is independent of the user to ensure accurate size reading Jewel bearings and continuous dials Contact edges are radiused to prevent the work from being marred or deflected Flat contact area measures 1/4" (6.3mm) in diameter and is 1/8" (0.125mm) thick Without case Below: 1015A Below: 1015A-6 Below: 1015A-4 Cat. No. EDP Range Dial Grad Throat Depth List Price Sale Price 1015A /2" " 2-1/2" $ A /2" " 4" A /2" " 6" B " " 2-1/2" B " " 4" B " " 6" Analog Amplifier EDP: List: $ Sale: $ Basic, compact shop floor analog amplifying comparator Simple operation with only three switches one each for inch/millimeter, fine or coarse resolution and polarity Zero set control Screwdriver adjustment for individual calibration Mirror separation scales minimize parallax viewing error Wire stand for easy readability Compact size: 8" x 4-3/4" x 2" (200 x 119 x 50mm) 110 volt AC operation (7.5 volt transformer included) Resolution: Coarse:.0001"/0.010mm, Fine: "/0.001mm Range: Coarse: ±.003"/±0.300mm Fine: ±0.0003"/±0.030mm Gaging Heads for the 718 (available separately) 715-1Z (EDP: 64479) Lever Type Gaging Head: $ Z (EDP: 64480) Left: 715-1Z Lever Type Gaging Head Below: 715-2Z Cartridge Type Gaging Head 718 Analog Cartridge Type Gaging Head: $ Amplifier 16 Promo # Mid-Year Tool Sale. Prices in U.S. Dollars & valid April 1 through Sept. 30, 2008.

17 Combination Square Sets All of the combination square sets on this page share the following features: 12" Blade in Satin Chrome or Regular Finish Reversible lock bolt, scriber, and spirit level in square head and protractor head Hardened steel, machine-divided blade with easy to read, sharp graduations 4R Grads. - 8ths, 16ths, Quick-Reading 32nds, 64ths Direct reading double 180 degree protractor scale Laroy S. Starrett invented the combination square in In 1880, he founded The L. S. Starrett Company to manufacture this exceptionally versatile tool. 9 Series Combination Square Sets Cast iron square head, center head, and non-reversible protractor head with black wrinkle finish 434 Series Combination Square Sets Forged, hardened steel reversible square head and center head with smooth black finish Cast iron reversible protractor head with spirit level, and smooth black finish Below R Combination Square Set Above: C R Combination Square Set Blade Blade Head Head List Sale Cat. No. EDP Style Length Material Finish Price Price R Regular 12" Cast iron Wrinkle $ $ C9-12-4R Satin Chrome 12" Cast Iron Wrinkle R Regular 12" Forged/Hardened Steel Smooth C R Satin Chrome 12" Forged/Hardened Steel Smooth Blades for Combination Squares Made from hardened steel with regular or satin chrome finish Machine-divided Easy to read sharp graduations All of these blades have 4R Grads: 8ths, 16ths, Quick-Reading 32nds, 64ths All blades fit 9 & 434 Series Starrett Combination Squaress Cat. No. EDP Blade Style Blade Length List Price Sale Price B12-4R Regular 12" $35.00 $31.11 CB12-4R Satin Chrome 12" B18-4R Regular 18" CB18-4R Satin Chrome 18" B24-4R Regular 24" CB24-4R Satin Chrome 24" See for complete product information. Specifications subject to change. 17

18 3020 Series Toolmakers Grade Stainless Steel Squares High quality toolmakers square Squareness accuracy to.0002" (0.005mm) for every 6" (150mm) Hardened, ground and lapped stainless steel construction on both the blade and the beam Beam machined at the inner corner for clearance Cat. No. EDP Blade Size Beam Size List Price Sale Price /32" 1-31/32" $77.00 $ /32" 2-31/32" /32" 3-29/32" /32" 6-7/8" S3020Z Set: , 4, 6, & 12 In Case Series Machinists Levels Ground and graduated main vials Vials are adjustable to a positive setting and are housed in a satin finished brass tube with a friction-fit closing cover to prevent breakage Level bases have an involute groove running the length of the base to provide reliable seating for round work Cross test vial (on 6", 8" & 12" levels) provides simultaneous leveling in both directions prevents main vial reading inaccuracies caused by canting the level sidewise on round work 6", 8" & 12" main level vials have graduations that are approximately seconds or.005"/foot (0.42mm/meter) with five or six lines on each side of the bubble Right: 98-6 Level Left: Level Cat. No. EDP Length Vials List Price Sale Price "/100mm Main (w/o Cross Test) $82.00 $ "/150mm Main & Cross Test "/200mm Main & Cross Test "/300mm Main, Cross Test & Single Plumb Promo # Mid-Year Tool Sale. Prices in U.S. Dollars & valid April 1 through Sept. 30, 2008.

19 C604 & C305 Series Precision Rules Made from high quality steel with an easy to read satin chrome finish Machine-divided and tempered for long life and flexibility Inspected to Starrett Master Standards traceable to NIST Quick-reading figures have extra fine graduations Distinctive size and style for numbers and staggered graduations provide excellent readability C604 Series: **Spring Tempered (3/64" thick) *4R Grad: 8ths; 16th; Quick Read 32nds; 64ths C305 Series **Full-Flexible (1/64" thick) *5R Grad: Quick Reading 10ths; Aircraft Quick Reading 100ths, 32nds, 64ths 706 Series Inspection Blocks Temper/ List Sale Cat.No. EDP L x W Grad* Thickness** Price Price C604R " x 1/2" 4R Spring $13.50 $12.00 C604R " x 1/2" 4R Spring C604R " x 9/16" 4R Spring C604R " x 5/8" 4R Spring C604R " x 3/4" 4R Spring C604R " x 1" 4R Spring C604R " x 1-1/8" 4R Spring C604R " x 1-1/4" 4R Spring C305R " x 1/2" 5R Full Flex C305R " x 1/2" 5R Full Flex C305R " x 3/4" 5R Full Flex C305R " x 3/4" 5R Full Flex C305R " x 3/4" 5R Full Flex Manufactured to precision tolerances for exceptional accuracy Hardened steel, ground and lapped Single block and matched pairs available Block Dimensions: 1" x 2" x 3"/25 x 50 x 75mm Parallelism:.0001"/0.003mm Squareness:.0001 IN/IN/0.003mm/25mm Hardness: RC Flatness:.0001"/0.003mm Great value for inspection laboratories and shopfloor Case Included Top to bottom: C305 front, C305 back, C604 front, C604 back Cat. No. EDP Description List Price Sale Price 706AZ Single 1" X 2" X 3" Block $ $ BZ Matched Pair 1" X 2" X 3" Blocks See for complete product information. Specifications subject to change. 19

20 Plus and minus sets Pin gages are in 0.001" increments Color coded,go/no-go gage handle included Rugged case marked for each gage Inspection certificate included Machined to a " tolerance Pins centerless lapped and etched with size Gages are 2" long and hardened to RC 60/64 All sharp corners are broken Cat. No. EDP Plus/Minus Gages Range List Price Sale Price S Plus S Minus " $62.00 $55.11 S Plus S Minus " S Plus S Minus " S Plus S Minus " S Plus S Minus " S Plus S Minus " S Plus S Minus " S Plus S Minus " RS 81.B Gage Block Set w/certification EDP: List: $ Sale: $ Etched, unique serial numbers are included on each block. Tolerance of ±50 min. Certificate of Calibration with NVLAP accreditation, in accordance with ISO with dated calibration certificate and NIST traceability number Measuring Range:.100" " in Steps of.001".200" " in Steps of.0001" 81 Block in set with wooden case: 9 Blocks.1001" Through.1009" (Steps of.0001") 49 Blocks.101" Through.149" (Steps of.001") 19 Blocks.050" Through.950" (Steps of.050") 4 Blocks 1.000" Through 4.000" (Steps of 1") S4000 Series Precision Steel Gage Pin Sets 20 Promo # Mid-Year Tool Sale. Prices in U.S. Dollars & valid April 1 through Sept. 30, 2008.

21 S7793Z Tachometer Kit EDP: List: $ Sale: $ function Tachometer/Ratemeter,Totalizer/Counter and Timer programmable in both inch and metric rates TTL pulse output Memory: Maximum/Minimum/Last Ranges: Optical: 5-200,000 RPM, Contact: ,000 RPM Rates w/10cm circumference Contact Wheel: Inches/Min: ,740, Centimeters/Min: ,000 Resolution: RPM Accuracy: Optical: ±0.01%. Contact: ±0.05% NIST traceable certificate of calibration included Operates up to 25 feet from reflective target using laser light source Includes remote contact assembly with concave and convex tips, 10cm linear speed wheel, case 3805A Digital Durometer EDP:12265 List: $ Sale: $ Lightweight, ergonomically designed, reasonably priced and accurate Measures hardness in Shore A values ideal for testing rubber, PVC, leathers, vinyl, acrylic, etc. Contact is made with a 35º blunt point for accuracy Large, easy-to-read LCD display Automatic Off Ability to allow averaging and to lock in peak value Accurate, repetitive deviation of HA< ±1 grade Resolution of.1ha Measuring range of 0-100HA Conforms to ASTM D-2240, ISO 7619 standards Compact size: 6.4" x 2.56" x 1.12"/163 x 65 x 28mm Includes RBR-63 rubber test block (Shore A 61-63) 3814 Analog Bench Hardness Tester EDP: List: $ Sale: $ Provides reliable hardness values for Rockwell Scales A through H and K of all types of metals/alloys Stable cast iron construction Conforms to ASTM E-18 standard Load: Minor:10Kgf. Major: A: 60Kgf, B: 100Kgf, C: 150Kgf Dead weight test force application & Hydraulic dashpot test force control Throat Depth: 6.6" (168mm). Maximum Test Height: 6.69" (169.9mm) Height/Width/Depth: 30 x 8.5 x 20"/762 x 216 x 508mm Weight: 267 lbs./121kg Includes a diamond indentor, 1/16" (1.6mm) ball indentor, three certified test blocks, four test tables 5.87" (149mm) and 2.5" (63.5mm) flat anvils, 5/8" (15.9mm) spot anvil, standard vee anvil, accessory case See for complete product information. Specifications subject to change. 21

22 827 Series Edge Finders Body and contacts made of tool steel, hardened, ground and lapped to close tolerances Includes case S579 Series Telescoping Gages Each gage has a handle and two spring-tensioned, telescoping contact arms Handles rigidly attached to contact plungers and automatically self-centering Constant spring tension gives uniform contact pressure Both plungers are easily locked at any desired setting Ends of both contacts are hardened and ground to a radius Includes case Cat. No. EDP Style Body Contact List Price Sale Price 827A Single.375".200" $19.50 $ B Double.500".200" & Point Cat. No. EDP # Gages Range List Price Sale Price S579GZ /16" - 2-1/8" $ $ S579HZ /16" - 6" C V-Blocks & Clamps EDP: List: $ Sale: $ Matched pair of V-Blocks with two Clamps Clamps have screw holes at 45 and 90 to hold round or square work 3/8-16 tapped holes for mounting blocks on faceplates or angle irons V-grooves are ground central and parallel to sides and base Hardened steel, precision ground, parallel, and square Each block is 2-1/2" long x 3" wide x 2" high / 63 x 75 x 50mm 22 Promo # Mid-Year Tool Sale. Prices in U.S. Dollars & valid April 1 through Sept. 30, 2008.

23 S117PC Center Punch Set EDP: List: $28.50 Sale: $25.33 Made of specially selected steel, hardened and tempered Round shanks well proportioned and nicely finished with knurled finger grip Points ground at an angle to provide durability Accurately centered tips Set of 5 (Nos. 117AA, A, B, C, D): Diameter at top Size Length of Tapered Point AA 3"/75mm 1/16"/1.5mm A 4"/100mm 5/64"/2mm B 4"/100mm 3/32"/2.5mm C 4"/100mm 1/8"/3mm D 4"/100mm 5/32"/4mm Set includes plastic case 818 Automatic Center Punch EDP: List: $27.00 Sale: $24.00 No hammer is required! Just hold the punch in an upright position, press the handle down, and a built-in mechanism strikes a perfect center mark every time Force of the blow can be adjusted by turning the knurled cap Lightweight, knurled aluminum handle for positive grip and easy handling Steel point may easily be removed for resharpening or replacement Works on metal, plastics, wood and other machinable materials All working parts are made of hardened tool steel 5" (125mm) long, 5/8" (16mm) diameter 819 Hinge Locating Automatic Center Punch EDP: List: $29.50 Sale: $26.22 Combines features of the 818 Punch with an exclusive self-centering locating sleeve that automatically centers starter holes for screws through butt hinges and other builders and cabinet hardware items The punch works by engaging the beveled edge of the sleeve with the countersunk hole in the hinge, then press down on the handle until the built-in mechanism strikes a blow to obtain a truly concentric starting hole Adjust for light or heavy impressions by turning the knurled cap All working parts are made of hardened tool steel 5" (125mm) long, 5/8" (16mm) diameter See for complete product information. Specifications subject to change. 23

24 187 Jobbers Drill Gage EDP: List: $48.50 Sale: $43.11 Range: 1/16"-1/2" Size of any twist drill from 1/16-1/2" by 64ths can be quickly determined Total of 29 holes; each marked with the drill size in inches and the decimal equivalent Black matte finish Gage information steel stamped on one side and white marked on the reverse side C183 Steel Protractor EDP: List: $62.00 Sale: $ Taper Gage EDP: List: $88.00 Sale: $ "/ 0.3-4mm range Made of quality tool steel 7/16"/11mm wide by 6-1/4"/160mm long Accurately tapered throughout its entire length for quick and convenient measuring of slot widths, etc. Rectangular head with four working edges Double graduations from 0-180º in opposite directions Back of the tool is flat Blade can be locked firmly at any angle by the lock nut Satin chrome finish Top: Front side with inch measurement. Middle: Shows tapered angle Bottom: Back side with millimeter measurement Useful tool for bearing work and for gaging slots Can be and has been used as a precision shim One side is graduated from.010" to.150" in thousandths of an inch,the other from 0.3mm to 4mm in one-twentieth of a mm (0.05mm) 24 Promo # Mid-Year Tool Sale. Prices in U.S. Dollars & valid April 1 through Sept. 30, 2008.

25 Screw Pitch Gages V, Unified, American National - 60 Threads Quickly determine the pitch of various threads Rugged steel case Each leaf has teeth corresponding to a definite pitch marked on the leaf Locking device securely holds leaves in position Includes 11-1/2 and 27 pipe thread pitches Right: No. 472 Below: No. 6 Cat. No. EDP Leaves TPI Range List Price Sale Price $31.00 $ Thickness Gage EDP: List: $69.00 Sale: $61.33 Leaves made of finest tempered-steel Each leaf is individually tested and marked with thickness Range: "/0.03-5mm 13 straight leaves Leaves easily removed or replaced Locking device allows locking one or more blades in place Rugged steel case See for complete product information. Specifications subject to change. 25

26 S167CHZ Radius Gage Set EDP: List: $ Sale: $ Radius gage set with 25 gages clearly marked with their individual radius Satin finish stainless steel Five different gaging surfaces for convex and concave radii Precision finished radii with extra smooth, accurate edges 4" long gage holder has two slots provided permitting gages to be held at 30º or 45º, either square in the slot or tipped to one side S667A Feeler Gages EDP: List: $60.00 Sale: $53.33 Set includes one each of 32 different pieces, 12" x 1/2" long, from.001"-.030" thick Rounded ends no ragged edges make stock easier to work with Made of the finest tempered steel Each piece is in an individual envelope Includes convenient 3/16" hole punched in the end for hanging Widely used in automotive, aviation, diesel and farm equipment manufacture and service and also in jig, fixture, gage and experimental work C391 Center Gage EDP: List: $18.00 Sale: $16.00 For use in grinding and setting screw cutting tools Includes scale for finding the number of threads per inch through graduations in 14ths, 20ths, 24ths and 32nds of an inch and table of double depths of threads for determining size of tap drills American Unified National Standard, 60 Made of spring-tempered steel with satin chrome finish 26 Promo # Mid-Year Tool Sale. Prices in U.S. Dollars & valid April 1 through Sept. 30, 2008.

27 91 Series Tap Wrenches Strong and well proportioned Nicely finished with tempered gripping surfaces Firmly holds square or round shank taps Plunger is operated by the knurled sleeve the spring inside the sleeve causes plunger to back off when pressure is removed Cat. No. EDP Body Length Tap Size Range List Price Sale Price 91A "/150mm 1/16"-1/4"/ mm $36.50 $ B "/225mm 3/16"-1/2"/ mm C "/300mm 1/4"-5/8"/ mm D "/400mm 5/16"-3/4"/8-19mm S551Z-7 Precision Screwdriver Set EDP: List: $44.50 Sale: $39.56 Soft-touch handles are tapered and proportioned to blade for rapid rotation and spin-free finger control cap provides precise turning and control Durable hardened chrome-vanadium blade/contacts Flat Blade widths are:.060"/1.5mm,.080"/2.0mm,.100"/2.5mm,.120"/3.0mm Three Phillips blades: #00, #0, and #1 Precision-machined tips are top quality for exact fit M1 All-Purpose Lubricant 12-Pack, 12 oz. Aerosol Cans Cat. No. M EDP Sale: $86.40 Simultaneously dries as it protects, avoiding dirt and grime Dries to leave a film that protects and lubricates Lubricates without silicone Penetrates quickly to free frozen nuts, bolts and metal parts Prevents rust and corrosion damage by providing a molecular shield that locks to the metal Non-soluble in water so it displaces moisture to lift it away from the surface to be protected Nonconductive, preventing short circuits 12-pack, 12 oz. Aerosol Cans See for complete product information. Specifications subject to change. 27

28 CP505A-12 Combination Protractor EDP: List: $89.99 Sale: $84.99 NEW The latest addition to the popular ProSite 505 Protractor family It performs all of the function of the current models, plus more, as follows: (1) Miter Cut (for miter joints): Transfer readings directly to the Miter Saw (2) Single Cut (for butt joints): Transfer readings directly to the Miter Saw (3) Compound Cut Conversion Table (on the bottom leg with Above: Rear the tool facing up): Specifically Left: Front for the Compound Miter Saw - For cutting Crown Molding as it lays flat in the Compound Miter Saw - Directly transfer the 'Miter Cut' conversions to the Compound Miter Saw (4) Protractor (Reverse side of tool): The actual angle on two scales; and (5) Roof Pitches: With the tool face down, matching the leg of the tool to the lines on the roof pitch scale gives a quick reference to common roof pitches The CP505A-12 is precision machined with lightweight aluminum construction and features a Teflon "O" Ring for smooth & precise operation The scales on the dial of this new tool are laser engraved for exceptional accuracy. This is the first 505-family tool to feature laser engraving. As with all 505 Series protractors, the CP505A-12 eliminates the guessing and the math, saving time and minimizing waste Above: Miter Cut & Single Cut readings Below: / protractor Above: Compound Cut Conversion Table Below: Roof Pitch Reference 28 Promo # Mid-Year Tool Sale. Prices in U.S. Dollars & valid April 1 through Sept. 30, 2008.

29 505 Series Miter Protractors The ProSite Protractor takes error-prone calculations out of the process of miter cuts Simply set your saw to the angle that you read upside down,backwards, the reading is always correct. This easy-to-use tool has two scales. The red scale and arrow show the angle for a miter joint, while the black arrows and scale provide the angle to fit a single workpiece to an angle. Ideal for carpenters, plumbers and all building trades that require the measuring and transferring of angles, as well as home use Made from durable 1/4" aluminum with Teflon O ring for smooth and precise operation Available in 12" and 7" models While markedly different in appearance, the 7" model has an identical dial and functions in the same way as the 12" Saves time and reduces waste Above: 7" Miter Protractor Left: 12" Miter Protractor 1. Measure the angle Cat. No. EDP Description List Price Sale Price 505A " Miter Protractor $44.99 $ A " Miter Protractor Set the saw to the angle that the Red Arrow points to on the Red Scale 3. Cut the pieces with the left and right angle, respectively 4. The result: A perfect miter See for complete product information. Specifications subject to change. 29

30 Measuring Tapes MY1-25 MY1-25F MY1-25F Fractional Scale S1 Scale (all other tapes) C1-25 Tru-Lok Tapes MY Tough Tapes TM MY1-33 High visibility, impact resistant rugged cases Ergonomic over-molded soft grip Smooth blade lock holds blade firmly in place Wide blade on the MY provides extra blade stand-out High quality, value priced tape measure Industrial quality with standard heavy-duty blades Long time favorite of professionals and homeowners Named Tru-Lok because the blade positively locks in position until the cam-activated lock button is released Tough Tip Blade Protector standard Rugged, impact resistant case Y1-25 AY1-25 ControLok Tapes TM Features a heavy-duty tape line that automatically stays put for easy control and handling Simply pull the tape out to the length you want and it automatically stays there until you release it A top control lever allows you to inch the blade into the desired position or control the speed when fully retracting it into the case Compact size and contoured design features rubber top grip for comfort and ease-of-handling Cat. No. EDP Description List Price Sale Price MY " X 25' $9.69 $8.07 MY1-25F " X 25' Fractional Read MY " X 25' Extra Wide MY " X 33' C " X 25' Chrome Case $15.99 $13.60 Y " X 25" Yellow Case AY " X 25' $16.62 $13.84 AY " X 33' Promo # Mid-Year Tool Sale. Prices in U.S. Dollars & valid April 1 through Sept. 30, 2008.

31 S011 Hidden Edge Utility Knife EDP: List: $15.08 Sale: $12.18 Disengage safety lock and squeeze to extend blade Blade is safely stored in the body when the tool is not in use This innovative knife keeps the blade safely tucked away when not in use, yet instantly available by simply releasing the safety lock and squeezing the lever to the knife body Cutting depth is easily and accurately adjusted with a thumb wheel. BXY Series Professional Box Beam Levels Quick release blade change Fast, tool-free blade changes you do not have to take this knife apart to replace the blade Storage for spare blades in the lever Safe and easy to use Left: BXY-24 Below: BXY-48 Ribs maximize strength and stability Heavy duty aluminum I-beam frame and virtually unbreakable under normal working conditions Rails are made of high strength, high profile heat-treated aluminum Accurate, easy to read magnified horizontal vial with large bubble Adjustable vials make it easy to set grades accurately and re-calibrate to level or plumb Replaceable vials allow for quick and easy repair All vials clear of top and bottom level rail Glare-resistant setting with luminous base for easy reading in dimly lit areas Shock-proof, leak-proof,fog-proof solid block acrylic vials can be accurately read upside down and right-side up Over-molded end caps Cat. No. EDP Length Vials List Price Sale Price BXY " 3 Vials (2 plumb/1 level) $89.38 $72.18 BXY " 3 Vials (2 plumb/1 level) BXY " 4 Vials (2 plumb/2 level) BXY " 4 Vials (2 plumb/2 level) BXY " 4 Vials (2 plumb/2 level) BXY " 4 Vials (2 plumb/2 level) See for complete product information. Specifications subject to change. 31

32 Promo # Mid-Year Tool Sale. Prices in U.S. Dollars & valid April 1 through Sept. 30, See for complete product information. Specifications subject to change.

33 J.W. DONCHIN CO. Precision Measuring Equipment and Industrial Supplies since W. Chicago Ave. - Chicago, IL Phone: Fax: sales@jwdonchin.com J.W. Donchin Co. was established in 1924 and has been known world wide ever since. Customer Service is our Main Focus. We offer Expert Product Knowledge, Large Stocking Inventory and Competitive Pricing to assist you in locating and selecting the correct tool or product to fit your needs. (J.W. Donchin Co. is one of L.S. Starrett s largest stocking distributors.) Contact Information: Phone: Fax: sales@jwdonchin.com Direct Access Links (View specific information, click on any of the following) Latest Website Updates: Website: Quotes: Latest Promos: Line Card (Product Lines & Mfg) Catalog / Promo / Pricelist Starrett Mitutoyo Fowler Brown & Sharpe