davenport burgess HOME OF THE

Transcription

1 davenport burgess HOME OF THE KEY & Multi Point Locking Catalogue DOOR HARDWARE window hardware PATIO HARDWARE EURO PROFILE CYLINDER LOCKS

2 INTRODUCTION user guide / glossary Backplate Hooks Over the past 20 years or so millions of upvc doors have been fitted throughout the UK people had become fed up with endlessly painting and repairing old wood doors and were looking to upgrade security, due in a large part to the increasing number of house burglaries. PVC double glazing soon became the popular choice for householders looking to replace doors and windows. They were drawn to the fact that it s plastic and therefore it doesn t rot nor does it need any paint or varnish, the added security - doors that lock in multiple positions (without having to bend down/reach up to fasten the old fashion bolts or latches on wooden doors). The only problem with upvc doors is that if the lock fails it takes time to track down that specific part, it s not just a case of nipping down to the local DIY store and picking a lock or handle that looks like it might fit. upvc is much more complex, firstly there are hundreds of different locks out there and to a certain extent no one will fit in another s place (unlike wood where you can just chisel a bit more of the door out. Here at DB we have made it our business to source the best possible range of upvc door locks. We aim to make the complex business of identifying multipoint locks simple by following our guide however if your still unsure as to which lock you require simply give us a call where a member of the sales will be more than happy to assist you in identifying your lock GLOSSARY The element of the handle that is fixed to the door. Back plates can be face fixed, i.e. the inner and outer handle screw into the face of the door independently, though most multipoint handles use bolt through handles, where the outer back plate has a screw lug for receiving the screw fixing from the inner handle. Backset The dimension from the lock faceplate to the centre line of the cylinder or keyhole. (This definition is different for traditional mortice locks) Hooks provide a steadfast locking point for a door. When thrown they extend into the keep and due to their shape and the geometry of movement, engage behind the keep plate to provide anti separation. Some multi-point locks have hooks that throw/move in the same direction, and whilst this provides resistance to horizontal separation, there is less resistance to lifting the door. Bi-directional hooks (movement in opposite directions) provide the optimum security as they effectively clasp the leaf into the outer frame Glossary & Gearbox Size Guide DOOR HARDWARE Door Handles Door Keeps Door Secondary Security Door Gear Box (Central Case) Cams (Rollers / Mushrooms) Rollers are often used for weathersealing on PVCu doors; and are a cylindrical shape. They generally also often an adjustment feature to enable the compression of the sash against the frame to achieve the appropriate weather seal. Mushrooms have an element that inter locks with in its keep to provide separation resistance of the sash from the frame. Keeps / Strikers Keeps are fitted to the door frame and the moving parts of the lock (hook, linear bolt or cam) locates into these when in the locked position. They often feature adjustable plates or pockets to allow for adjustment of the door once fitted. Keeps for roller cams usually feature a chamfered (angled) edge, to guide them into the keep (reducing the closing force required). Mushroom Bolt Roller WINDOW HARDWARE 18...Window Handles 18...Window Keeps Window Secondary Security Window Espagnolette PATIO HARDWARE Patio Secondary Security Patio Accessories EURO PROFILE CYLINDER LOCKS Centre The dimension between the lock spindle and the centre of the keyway of the gearbox. Centres can vary between lock systems, though typically, the UK standard is 92mm. Older lock types do have different centres. Understanding the lock centre dimension is critical for specification of the correct handle. See also Offset Spindle configuration. Latch (Sash Bolt) The chamfered part of the lock usually in the central gearbox, which initially engages to hold the door in the closed position when shut. The latch is spring loaded and retracts when it makes contact with the striking edge of the keep, and then extends when aligned with in the keep. Latches are typically deadlocked once the lock is fully engaged (locked) and are reversible by removing the screws on the external face of the latch and then rotating the latch screws are then re-inserted Zone 1500 Series DB 1400 Series Faceplate (Face Bar) The metal part of the lock that is visible on the edge of the door leaf. These can vary in width to suit the application. 16mm is typical for PVCu to suit the euro groove channel, 20mm is common for timber and composite doors. Latch Top / Hook Bolt Latch Top / Deadbolt 2 Davenport Burgess, 47 Wednesfield Road, Willenhall, West Midlands, WV13 1AL Tel: sales@davenport-burgess.com 3

3 point user guide locking / glossary user guide / glossary Lever Handles The rotating operating element of the handle. Handle designs can vary from plain straight levers, to decorative swan neck, twist and contemporary designs. Additionally, extended levers can be used for disability complaint applications to reduce operating forces of the lock operation. Lever Pad Handle A handle type, typically used with offset or split spindle operation (though not exclusively) that is designed to mimic a traditional knob aesthetically, whilst having conventional lever operation. Spindle The square section drive bar, usually 8mm in width, which is positioned through the drive of the lock and locates into the handle set levers, or pads. Rotation of the lever/pad rotates the spindle, which in turn operates the drive (follower) of the lock. The length of the spindle is dependent upon the thickness of the door and depth of the handles lever. GEARBOX SIZE GUIDE On many locking mechanisms it is possible to change just the centre gearbox rather than the whole strip, and as they are fixed on by a couple of bolts its a relatively straightforward job to do. We have gearboxes available to replace many makes including GU, Era, Saracen, Mila, Cego, Surelock, Fuhr, Yale, Fullex and Maco. When identifying a gearbox for a upvc door the first measurements to take are the Centre, and the backset Measurement is the Centre. This is the distance between the centre of the barrel and the center of the spindle. A B C D PZ Backset Height Width (B) B A (A) C (C) Case Type (E) Latch Only Latch & Hook Latch & Bolt Single Spindle Lock Case Split Spindle Double Spindle Lock Case Measurement is the back set. That is the distance from the front of the locking system to the middle of the spindle. The most common are 28mm and 35mm. There are some other sizes on older door sections. Look to see if there is a manufacturers name stamped anywhere on the strip this will also help ID the gearbox. (D) D Lever Handle Linear Bolts Pad Handle Gives you the nightlatch function on certain types of locks. The spindle is split, so that depressing the handle on the outside of the door does not retract the latch. See davenport-burgess.com for more door furniture. Linear bolts extend horizontally into the keep, with greater penetration than a roller and can be effective for door sets with small gaps (4mm or less) between the frame and the door. Nightlatch Function On A Multi-Point Lock Gives the option for the entry into the house from outside requiring a key, even when the lock has not been fully engaged, this is to replicate the operation of a traditional nightlatch. Offset Spindle An alternative mechanism to the split spindle for providing a nightlatch function. An offset spindle lock has two drives, one of which retracts the bolts/rollers/hooks and latch, and one that will only retract the bolts and not the latch. Typically in the UK the centres are set at 92 mm and 62mm. Used in conjunction with a handle where the inner and outer levers or pads are offset, so that the external handle will not retract the latch, the night latching function is achieved. Sprung / Unsprung (Lock Case and Handles) Multipoint lock gearboxes can be either sprung or unsprung. With a sprung gearbox, the drive mechanism is spring loaded, so that when the lever is depressed and released, the handle and latch are returned to their original (at rest) position by the spring within the gearbox. Unsprung gearboxes require the use of sprung handles (handle sets with spring cassettes) to return the lock drive from the depressed position, thus re-engaging the latch. Spring cassettes are also used in certain handles, where the weight of the lever is too great to allow the integral spring within the gear box to operate effectively in isolation. This is typically the case with solid cast levers and extended levers for disability use. Snib A plastic part on the lock that allows the latch to be held in its withdrawn position, thus preventing it engaging within the keep. This is normally used in conjunction with a nightlatch (lever/pad) facility to temporarily prevent the door from being locked when closed. SEE PAGES FOR OUR GEARBOX SELECTION Mila 25B/S L/L Lockcase Latch only Asgard 45 B/S Basta/Gibbons Lock Case Snib 48/86PZ 32B/S 4 Davenport Burgess, 47 Wednesfield Road, Willenhall, West Midlands, WV13 1AL Tel: sales@davenport-burgess.com 5

4 1400 Contract Series 99Comes with 3 keys 99Satin Chrome Finish 995 Pin 99Anti-pick 99Boxed & Visi-Packed DOOR HARDWARE Door Handles LIMITED OFFER See Page 32 for the Zone 1400 Range Door Keeps Door Secondary Security Door Gear Box

5 Multipoint DOOR door HARDWARE hardware locking MULTIPOINT Multipoint LOCKING locking door hardware White Flexi-Ultimate Lever/Lever Door Handle Gold Flexi-Ultimate Lever/Lever Door Handle Chrome Lever/Lever 68mm 215 S/hole Sprung Gold Lever/Lever 68mm 215 S/hole Sprung A universal handle designed to fit 75% of MPL locks on the market. Can fit single split and twin spindle lock cases. Extra long backplate to cover any existing holes. Simple and easy to fit. A universal handle designed to fit 75% of MPL locks on the market. Can fit single split and twin spindle lock cases. Extra long backplate to cover any existing holes. Simple and easy to fit. The DB Lever/Lever Inline Door Handle has a 68mm PZ centre, designed to suit Fullex Locks. This handle is universally handed, and is supplied in a pair together with and 8mm spindle and two colour matching screws. Fullex Brugge Series Lever/Lever handles for use with Fullex MPL locks. Fixing screws and spindle NOT included. PZ Lock Centres: 60-95mm Fixing Screw Centres: 270mm Backplate Length: 290mm Sprung Handles: Yes Colour : White Size - PZ : Adjustable Size - Screw Centres : 270mm Handle Type : Offset Lever/Lever Size - High : 290mm NEW IMPROVED DESIGN Prevents standard euros from being snapped. Incorporates strength of the Handle Plus Spindle with the euro cylinder. MPL PZ Lock Centres: 60-95mm Fixing Screw Centres: 270mm Backplate Length: 290mm Sprung Handles: Yes Colour : Gold Size - PZ : Adjustable Size - Screw Centres : 270mm Handle Type : Offset Lever/Lever Size - High : 290mm NEW IMPROVED DESIGN Prevents standard euros from being snapped. Incorporates strength of the Handle Plus Spindle with the euro cylinder. MPL Take care when measuring, as this is similar to the 70mm PZ centre of Ferco locks. 68mm PZ Centre. Suitable for upvc exterior doors. Lever/Lever Inline handle (levers are inline and work off the same spindle). Supplied as a pair with 8mm spindle. Universal handle - can be used either left or right handed. Sprung handle. Supplied with two colour matching screws. MPL PZ Lock Centres: 68mm Fixing Screw Centres: 21 5mm Backplate Length: 245mm Sprung Handles: Yes Packaging: Bagged Item Ref : WGRP-0910 Brandname : Fullex Colour : Gold Size - PZ : 68mm Size - Screw Centres : 215mm Handle Type : Lever/Lever Size - High : 245mm MPL Silver Flexi-Ultimate Lever/Lever Door Handle Chrome Flexi-Ultimate Lever/Lever Door Handle Silver Lever/Lever 68mm 215 S/hole Sprung White Lever/Pad 68mm 215 S/hole Sprung A universal handle designed to fit 75% of MPL locks on the market. Can fit single split and twin spindle lock cases. Extra long backplate to cover any existing holes. Simple and easy to fit. A universal handle designed to fit 75% of MPL locks on the market. Can fit single split and twin spindle lock cases. Extra long backplate to cover any existing holes. Simple and easy to fit. The DB Lever/Lever Inline Door Handle has a 68mm PZ centre, designed to suit Fullex Locks. This handle is universally handed, and is supplied in a pair together with and 8mm spindle and two colour matching screws. Fullex Lever/Pad handles for use with Fullex MPL locks. Fixing screws and spindle included. PZ Lock Centres: 60-95mm Fixing Screw Centres: 270mm Backplate Length: 290mm Sprung Handles: Yes Colour : Silver Size - PZ : Adjustable Size - Screw Centres : 270mm Handle Type : Offset Lever/Lever Size - High : 290mm NEW IMPROVED DESIGN Prevents standard euros from being snapped. Incorporates strength of the Handle Plus Spindle with the euro cylinder. MPL PZ Lock Centres: 60-95mm Fixing Screw Centres: 270mm Backplate Length: 290mm Sprung Handles: Yes Colour : Chrome Size - PZ : Adjustable Size - Screw Centres : 270mm Handle Type : Offset Lever/Lever Size - High : 290mm NEW IMPROVED DESIGN Prevents standard euros from being snapped. Incorporates strength of the Handle Plus Spindle with the euro cylinder. MPL Take care when measuring, as this is similar to the 70mm PZ centre of Ferco locks. 68mm PZ Centre. Suitable for upvc exterior doors. Lever/Lever Inline handle (levers are inline and work off the same spindle). Supplied as a pair with 8mm spindle. Universal handle - can be used either left or right handed. Sprung handle. Supplied with two colour matching screws. MPL PZ Lock Centres: 68mm Fixing Screw Centres: 215mm Backplate Length: 240mm Packaging: Bagged Item Ref : WGRP-0909 Colour : White Size - PZ : 68mm Size - Screw Centres : 215mm Handle Type : Lever/Pad Size - High : 240mm MPL Black Flexi-Ultimate Lever/Lever Door Handle White Lever/Lever 68mm 215 S/hole Sprung Chrome Lever/Pad 68mm 215 S/hole Sprung Gold Lever/Pad 68mm 215 S/hole Sprung A universal handle designed to fit 75% of MPL locks on the market. Can fit single split and twin spindle lock cases. Extra long backplate to cover any existing holes. Simple and easy to fit. Fullex Lever/Lever handles with an additional snib turn for use with compatible Fullex MPL locks. Fixing screws and spindle NOT included. Fullex Lever/Pad handles for use with Fullex MPL locks. Fixing screws and spindle included. Fullex Lever/Pad handles for use with Fullex MPL locks. Fixing screws and spindle included. PZ Lock Centres: 60-95mm Fixing Screw Centres: 270mm Backplate Length: 290mm Sprung Handles: Yes PZ Lock Centres: 68mm Fixing Screw Centres: 215mm Backplate Length: 245mm Sprung Handles: Yes Packaging: Bagged PZ Lock Centres: 68mm Fixing Screw Centres: 215mm Backplate Length: 240mm Sprung Handles: Yes Packaging: Bagged PZ Lock Centres: 68mm Fixing Screw Centres: 215mm Backplate Length: 240mm Sprung Handles: Yes Packaging: Bagged Colour : Black Size - PZ : Adjustable Size - Screw Centres : 270mm Handle Type : Offset Lever/Lever Size - High : 290mm Brandname : Fullex Colour : White Size - PZ : 68mm Size - Screw Centres : 215mm Handle Type : Lever/Lever Size - High : 245mm Colour : Chrome Size - PZ : 68mm Size - Screw Centres : 215mm Handle Type : Lever/Pad Size - High : 240mm Item Ref : WGRP-0909 Colour : Gold Size - PZ : 68mm Size - Screw Centres : 215mm Handle Type : Lever/Pad Size - High : 240mm MPL MPL MPL MPL Davenport Burgess, 47 Wednesfield Road, Willenhall, West Midlands, WV13 1AL Tel: sales@davenport-burgess.com 9

6 Multipoint door hardware locking door hardware White Lever/Lever 48mm 215 S/hole Sprung Silver Lever/Lever 48mm 215 S/hole Sprung Flexi Hook & Deadbolt Keeps Centre Latch Deadbolt Keep Left The DB Lever/Lever Inline Door Handle is designed to suit Aluminium locks. It has a 48mm PZ centre, which suits Aluminium Multipoint Locks. The DB Lever/Lever Inline Door Handle is designed to suit Aluminium locks. It has a 48mm PZ centre, which suits Aluminium Multipoint Locks. Suitable for most size hook and dead bolts. Adjustable Non-handed Size: 134mm x 30mm Universal Centre Keeps for doors. Suitable for deadbolt and latch. Handed for left and right hinged doors. Latch keeper is adjustable. Size: 224mm x 30mm. This handle is universally handed and is supplied as a pair. 215mm Screw hole distance. Suitable for exterior doors. Lever/Lever Inline handle (levers are inline and work off the same spindle). This handle is universally handed and is supplied as a pair. 215mm Screw hole distance. Suitable for exterior doors. Lever/Lever Inline handle (levers are inline and work off the same spindle). Brandname: HD Flexi Type : Accessories Type : Accessories Handing : Right Hand Supplied as a pair with 8mm spindle. Sprung handle. Supplied with two colour matching screws. Supplied as a pair with 8mm spindle. Sprung handle. Supplied with two colour matching screws. MPL MPL MPL MPL Gold Lever/Lever 48mm 215 S/hole Sprung The DB Lever/Lever Inline Door Handle is designed to suit Aluminium locks. It has a 48mm PZ centre, which suits Aluminium Multipoint Locks. Gold Vitawin Lever/Pad 92mm 122 S/hole Sprung The Vitawin Lever/Pad Door Handle is a durable handle designed to suit Vitawin multipoint locks. This inline handle is sprung, and has a 92mm PZ centre, will also suit a majority of multipoint locks with 92mm PZ centres. Centre Latch Deadbolt Keep Right Universal Centre Keeps for doors. Suitable for deadbolt and latch. Handed for left and right hinged doors. Latch keeper is adjustable. Size: 224mm x 30mm. Single Mushroom Keep MPL Universal Mushroom Keep. Non handed and non adjustable. Size: 112mm x 30mm. This handle is universally handed and is supplied as a pair. 215mm Screw hole distance. Suitable for exterior doors. Lever/Lever Inline handle (levers are inline and work off the same spindle). Supplied as a pair with 8mm spindle. Sprung handle. Supplied with two colour matching screws. Type : Accessories Handing : Right Hand Brandname : Mila Type : Accessories Handing : Non Handed MPL MPL MPL MPL Chrome Vitawin Lever/Pad 92mm 122 S/hole Sprung White Vitawin Lever/Pad 92mm 122 S/hole Sprung Roller Keeps Pack of 4 Flexi Door Restrictor Length 335mm S/Holes 263mm The Vitawin Lever/Pad Door Handle is a durable handle designed to suit Vitawin multipoint locks. This inline handle is sprung, and has a 92mm PZ centre, will also suit a majority of multipoint locks with 92mm PZ centres. The Vitawin Lever/Pad Door Handle is a durable handle designed to suit Vitawin multipoint locks. This inline handle is sprung, and has a 92mm PZ centre, will also suit a majority of multipoint locks with 92mm PZ centres. Keeps to suit roller/mushroom cams on door locks. Supplied in a pack of 4 keeps. Concealed door 90 degree restrictor. Hold open stay. Fixes to top of the door and inside of the plastic frame.can be used for or composite doors with a frame. Colour : Satin Stainless MPL MPL MPL MPL Davenport Burgess, 47 Wednesfield Road, Willenhall, West Midlands, WV13 1AL Tel: sales@davenport-burgess.com 11

7 Multipoint door hardware locking door hardware White Flexi Sash Guard-1 The WP Flexi Facefix Sash Guard (Swing Lock) is easy to install and use. This sash guard provides additional security for upvc windows & doors by helping to provide additional strength which helps to prevent forced entry or accidental opening. As this is a Flexi product it is designed to fit a large range of windows and doors. Brown Flexi Sash Guard-1 The WP Flexi Facefix Sash Guard (Swing Lock) is easy to install and use. This sash guard provides additional security for upvc windows & doors by helping to provide additional strength which helps to prevent forced entry or accidental opening. As this is a Flexi product it is designed to fit a large range of windows and doors. ABT/Basta/Gibbons Lock Case Snib 48/86PZ 32B/S Basta/Gibbons Replacement MPL Gearboxes. PZ Centres: 48/86mm Case Height: 146mm Case Width: 50mm Operation: Twin Spindle (T/S) & Lever / Lever (L/L) MPL303 - For doors (No Snib) MPL304 - For Aluminium doors (with snib) ABT/Basta/Gibbons Lockcase 48/86PZ 32B/S Basta/Gibbons Replacement MPL Gearboxes. PZ Centres: 48/86mm Case Height: 146mm Case Width: 50mm Operation: Twin Spindle (T/S) & Lever / Lever (L/L) MPL303 - For doors (No Snib) MPL304 - For Aluminium doors (with snib) Each Sash Guard comes in a pack with one Sash Jammer, two Sash Packers to ensure a secure fit, two Screw Cap Covers and 3 Button Spacers, this gives you all of the parts that you need to ensure a strong and secure fit. Suitable for all upvc windows and doors. Available in white & brown Complete with 3mm/5mm packers and supplied with plastic screw hole covers. Non - locking only. Each Sash Guard comes in a pack with one Sash Jammer, two Sash Packers to ensure a secure fit, two Screw Cap Covers and 3 Button Spacers, this gives you all of the parts that you need to ensure a strong and secure fit. Suitable for all upvc windows and doors. Available in white & brown Complete with 3mm/5mm packers and supplied with plastic screw hole covers. Non - locking only. Operation : Twin Spindle Size - Backset : 32mm Size - PZ : 48/86mm Size - Width : 50mm Size - High : 145mm MPL Packaging : Type Loose Operation : Twin Spindle Size - Backset : 32mm Size - PZ : 48/86mm Size - Width : 50mm Size - High : 145mm MPL FIX / Asgard 35 B/S 92/70pz Latch/Hook Yale Fix Asgard Replacement MPL Gearboxes. FIX / Asgard 45 B/S Yale Fix Asgard Replacement MPL Gearboxes. PZ Centres: 70/92mm Case Height: 210mm Case Width: 60mm Operation: T/S PZ Centres: 70/92mm Case Height: 210mm Case Width: 52mm Operation: T/S Each Pack Contains: Sash Jammer x1. Sash Packers x2 Screw Cap Covers x2 Button Spacers x3 Each Pack Contains: Sash Jammer x1. Sash Packers x2 Screw Cap Covers x2 Button Spacers x3 MPL025 MPL Operation : Twin Spindle Size - PZ : 70/92mm Size - Width : 52mm Type : Latch & Hookbolt Size - High : 210mm Operation : Twin Spindle Size - PZ : 70/92mm Size - Width : 60mm Type : Latch & Hookbolt Size - High : 210mm White Key Locking Sash Jammers MPL MPL The WP Flexi Facefix Sash Guard (Swing Lock) is easy to install and use. This sash guard provides additional security for upvc windows & doors by helping to provide additional strength which helps to prevent forced entry or accidental opening. As this is a Flexi product it is designed to fit a large range of windows and doors and suitable for all upvc windows and doors. Each Sash Guard comes in a pack with one Sash Jammer, two Sash Packers to ensure a secure fit, two Screw Cap Covers and 3 Button Spacers, this gives you all of the parts that you need to ensure a strong and secure fit. UMK/L Long Multi Tool ERA 35 B/S Lockcase ERA Replacement MPL Gearboxes. Case Height: 219mm Case Width: 49mm Operation: S/S & L/L ERA 45 B/S Lockcase ERA Replacement MPL Gearboxes. Case Height: 219mm Case Width: 60mm Operation: S/S & L/L Available in white, complete with 3mm/5mm packers and supplied with plastic screw hole covers. Non - locking only. Sash Jammer x1. Screw Cap Covers x2 Sash Packers x2 Button Spacers x3 MPL The tool is Zinc coated solid diecast key for quick and easy operation of Euro or Oval cylinder operated mortice locks. An ideal tool when fitting locks and replacing cylinders. Great NEW product now available from Davenport Burgess Operation : Split Spindle Size - Backset : 35mm Size - Width : 49mm Size - High : 219mm MPL Operation : Split Spindle Size - Width : 60mm Size - High : 219mm MPL Davenport Burgess, 47 Wednesfield Road, Willenhall, West Midlands, WV13 1AL Tel: sales@davenport-burgess.com 13

8 Multipoint door hardware locking door hardware ERA Vectis 45 B/S ERA Replacement MPL Gearboxes. Fullex 37/40BS Lockcase Fullex Case A Replacement MPL Gearboxes. GU Lever/Lever GU Replacement MPL Gearboxes. GU New 45 B/S GU Replacement MPL Gearboxes. Case Height: 219mm Case Width: 60mm Operation: S/S & L/L PZ Centres: 68mm Case Height: 194mm Case Width: 54mm Operation: S/S & L/L Case Height: 194mm (Except MPL312 = 203mm) Case Width: 60mm Case Height: 194mm (Except MPL312 = 203mm) Case Width: 60mm Operation : Split Spindle Size - Width : 60mm Size - High : 219mm Operation : Split Spindle Size - Backset : 37mm Size - PZ : 68mm Size - Width : 54mm Size - High : 194mm Operation : Lever/Lever Size - Width : 60mm Size - High : 203mm Operation : Lever/Lever Size - Width : 60mm Size - High : 203mm MPL MPL MPL MPL Fullex XL C/B 35 Hook+Body L/L Fullex XL Series Replacement MPL Gearboxes. Single Cam. Case Height: 229mm Case Width: 47mm Fullex C/Beater 35 Fullex Crimebeater Replacement MPL Gearboxes. Case Height: 227mm Case Width: 48mm Mila 25B/S L/L Lockcase Latch only Mila Latch Only Replacement MPL Gearboxes. Case Height: 234mm Case Width: 54mm Mila 28B/S L/L Lockcase Latch only Mila Latch Only Replacement MPL Gearboxes Case Height: 234mm Case Width: 54mm Operation : Split Spindle Size - Backset : 35mm Size - Width : 47mm Type : Latch & Hookbolt Size - High : 229mm Operation : Lever/Lever Size - Backset : 55mm Size - Width : 48mm Size - High : 227mm Packaging Type: Loose Operation: Lever/Lever Size - Backset: 35mm Size - PZ92mm Size - Width: 54mm Type: Latch Size - High: 234mm Distance of connection points: 13cm Packaging Type: Loose Operation: Lever/Lever Size - Backset: 35mm Size - PZ92mm Size - Width: 54mm Type: Latch Size - High: 234mm Distance of connection points: 13cm MPL MPL MPL MPL Fullex C/Beater 45 Fullex Crimebeater Replacement MPL Gearboxes. GU OLD 35/92 L/P Can fit single split and twin spindle lock cases. Extra long backplate to cover any existing holes. Simple and easy to fit. Paddock 35 BS L/P Hook Paddock Lockmaster - Twin Cam Replacement MPL Gearboxes. Paddock 35 B/S L/L Lockcase Paddock Lockmaster - Twin Cam Replacement MPL Gearboxes. Case Height: 227mm Case Width: 48mm Operation : Lever/Lever Size - Backset : 55mm Size - Width : 48mm Size - High : 227mm Case Height: 207mm Case Width: 51mm Operation : Lever/Lever Size - Backset : 35mm Size - Width : 51mm Size - High : 207mm PZ Centres: 62/92mm Case Height: 227mm Case Width: 47mm Operation: T/S Operation : Twin Spindle Size - PZ : 62/92mm Size - Width : 57mm Type : Hookbolt Size - High : 227mm PZ Centres: 62/92mm Case Height: 227mm Case Width: 47mm Operation: T/S Operation : Twin Spindle Size - PZ : 62/92mm Size - Width : 57mm Type : Latch Size - High : 227mm MPL MPL MPL MPL Davenport Burgess, 47 Wednesfield Road, Willenhall, West Midlands, WV13 1AL Tel: sales@davenport-burgess.com 15

9 Multipoint door hardware locking Paddock 45 B/S L/L Lockcase Paddock Lockmaster - Single Cam Replacement MPL Gearboxes. Paddock 35 B/S L/P Lockcase Paddock Lockmaster - Single Cam Replacement MPL Gearboxes. Case Height: 227mm Case Width: 47mm Case Height: 227mm Case Width: 70mm Operation : Lever/Lever Size - Width : 57mm Size - High : 227mm Operation : Lever/Lever Size - Width : 57mm Size - High : 227mm MPL MPL Winkhaus Cobra Winkhaus Replacement MPL Gearboxes. Yale Doormaster 35mm S/S Yale YS-170 Replacement MPL Gearboxes. Case Height: 185mm Case Width: 70 Operation: S/S & L/L Case Height: 217mm Case Width: 52mm Operation: S/S & L/L Operation : Split Spindle Size - Backset : 55mm Size - Width : 70mm Size - High : 185mm Operation : Split Spindle Size - Width : 52mm Type : Latch & Hookbolt Size - High : 217mm MPL MPL Yale YS-170 Hook Replacement Yale Doormaster centre lockcase. This split spindle lockcase is suitable as a direct replacement for a broken Yale Doormaster Lock. Centre hook, YS170 Version. Available with a 35mm (MPL064) or 45mm (MPL063) backset. WINDOW HARDWARE 18...Window Handles 18...Window Keeps Yale 35BS New Lockcase Hook MPL Yale 45BS 3H YS170 MPL Window Secondary Security Window Espagnolette 16 Davenport Burgess, 47 Wednesfield Road, Willenhall, West Midlands, WV13 1AL

10 point window locking hardware window hardware White Flexi Window Handle +4 Spindles Gold Flexi Window Handle +4 Spindles Flexi Concealed Window Restrictor L/H Key locking push button inline Espagnolette style window handle for double glazed windows. Comes with 4 different length spindles to save time cutting (10mm, 20mm, 30mm, 40mm). Distance between screw centres: 43mm. Key locking (includes 1 key) and Colour matching screw cover. Universal (handed) - turns left and right. Brandname : HD Flexi Colour : White Handing : Non Handed Size - Screw Centres : 43mm Handle Type : Espagnolette Key locking push button inline Espagnolette style window handle for double glazed windows. Comes with 4 different length spindles to save time cutting (10mm, 20mm, 30mm, 40mm). Distance between screw centres: 43mm. Key locking (includes 1 key) and Colour matching screw cover. Universal (handed) - turns left and right. Brandname : HD Flexi Colour : Gold Handing : Non Handed Size - Screw Centres : 43mm Handle Type : Espagnolette The DB Flexi Concealed Window Restrictor is a unique restrictor that is designed to fit a wide range of different windows. It is fitted to the frame of the window, keeping it concealed until it needs to be adjusted. This concealed window restrictor is non-key locking, so that the window can be used as an emergency exit in case of fire etc. In addition, it has a strong child safety catch lock, helping to keep younger children safe near the windows. The Flexi concealed window restrictor is supplied in both left and right handed variations to fit the frame of your window. Suitable for upvc & Aluminum window frames. Strong child safety catch lock. Non - key locking for quick release emergency exit. Stud height 9.5mm complete with packers to make stud height 11.5 & 13.5mm. MPL MPL MPL Chrome Flexi Inline Window Handle +4 Spindles Key locking push button inline Espagnolette style window handle for double glazed windows. Comes with 4 different length spindles to save time cutting (10mm, 20mm, 30mm, 40mm). Distance between screw centres: 43mm. Key locking (includes 1 key) and Colour matching screw cover. Universal (handed) - turns left and right. Fixing screws and spindle NOT included. Brandname : HD Flexi Colour : Chrome Handing : Non Handed Size - Screw Centres : 43mm Handle Type : Espagnolette Silver Flexi Inline Window Handle +4 Spindles Key locking push button inline Espagnolette style window handle for double glazed windows. Comes with 4 different length spindles to save time cutting (10mm, 20mm, 30mm, 40mm). Distance between screw centres: 43mm. Key locking (includes 1 key) and Colour matching screw cover. Universal (handed) - turns left and right. Brandname : HD Flexi Colour : Gold Handing : Non Handed Size - Screw Centres : 43mm Handle Type : Espagnolette Flexi Concealed Window Restrictor R/H The WP Flexi Concealed Window Restrictor is a unique restrictor that is designed to fit a wide range of different windows. It is fitted to the frame of the window, keeping it concealed until it needs to be adjusted. This concealed window restrictor is non-key locking, so that the window can be used as an emergency exit in case of fire etc. In addition, it has a strong child safety catch lock, helping to keep younger children safe near the windows. The Flexi concealed window restrictor is supplied in both left and right handed variations to fit the frame of your window. Suitable for upvc & Aluminum window frames. Strong child safety catch lock. Non - key locking for quick release emergency exit. Stud height 9.5mm complete with packers to make stud height 11.5 & 13.5mm. MPL MPL MPL Repair Window Keeps (SOLD IN PAIRS) Penkid FIXED Cable Restrictor White The DB Flexi Window Keep is designed to suit any profile. This flexi keep is designed to fit most profiles, making it ideal for tradesmen, or if you are working with a range of profiles. Also known as window strikers, these window keeps are designed to provide a venting position in the window and accept the cams and rollers of the window s lock. Item Ref : MPL647 Type : Accessories For semi-permanent installation, this restictor has no option to unlock Gives a 10-15cm opening in a window Keep for mushroom espag bolts Non handedpackaging: Bagged MPL MPL Davenport Burgess, 47 Wednesfield Road, Willenhall, West Midlands, WV13 1AL Tel: sales@davenport-burgess.com 19

11 point window locking hardware window hardware Penkid Cable Restrictor Single The Penkid Cable Window Restrictor is suitable for all kinds of doors & windows including upvc, aluminium, wooden and metal profiles. This cable window restrictor restricts the opening of a window, giving between 10cm and 15cm worth of opening, depending on where the restrictor is installed on the window. This Penkid cable restrictor is particularly useful for keeping windows near young children safe, preventing accidents where the child pushes the window open and falls out. Flexi Espag 600/8 The Flexi Espag is the ultimate repair window espag, able to replace 99% of shoot bolts and espags. This universal espag rod is perfect for repair work, letting you finish jobs in just one visit. The adjustable mushroom cams, backset and retaining clips give this espag lock the flexibility to replace almost any window mechanism. 1000/800/600/400mm length - Can also be cut down to suit the size of the profile (To a minimum of 400mm). Flexi Espag 600/9 The Flexi Espag is the ultimate repair window espag, able to replace 99% of shoot bolts and espags. This universal espag rod is perfect for repair work, letting you finish jobs in just one visit. The adjustable mushroom cams, backset and retaining clips give this espag lock the flexibility to replace almost any window mechanism. 1000/800/600/400mm length - Can also be cut down to suit the size of the profile (To a minimum of 400mm). This cable restrictor is key locking, which allows the window to be opened fully when the restrictor is unlocked, while also preventing the window restrictor from being unlocked by accident. The Penkid is supplied in a pack with the restrictor, a cover plate, screws and fixing instructions, to make it easy to install. In addition, the screws are selfdrilling, meaning they can be used directly on the window profile. White MPL Dark Brown MPL or 9mm adjustable Mushroom cams. Stainless Steel mushroom heads and faceplate. Designed to fit - Offset. Inline. Suits Slimline (13mm). Standard (16mm). Eurogroove. Backset between 20 and 25mm. 8 or 9mm adjustable Mushroom cams. Stainless Steel mushroom heads and faceplate. Designed to fit - Offset. Inline. Suits Slimline (13mm). Standard (16mm). Eurogroove. Backset between 20 and 25mm. Supplied with a visible cable length of 175mm - overall length 200mm - provides a 10 to 15cm restriction. Locking - provides extra child safety and home security. 1 Key included in pack, extra keys can be purchased HERE Pack contains - restrictor, cover plates, screws and fitting instructions. Endures up to 550kg of force. CE & BS-EN Tested for added assurance. Perfect for use in homes, hotels, schools, nurseries etc. Suitable for use on aluminium, timber & upvc windows and timber, upvc & composite doors. Grey MPL Light Brown MPL Flexi Espag 800/8 The Flexi Espag is the ultimate repair window espag, able to replace 99% of shoot bolts and espags. This universal espag rod is perfect for repair work, letting you finish jobs in just one visit. The adjustable mushroom cams, backset and retaining clips give this espag lock the flexibility to replace almost any window mechanism. MPL012 MPL Flexi Espag 800/9 The Flexi Espag is the ultimate repair window espag, able to replace 99% of shoot bolts and espags. This universal espag rod is perfect for repair work, letting you finish jobs in just one visit. The adjustable mushroom cams, backset and retaining clips give this espag lock the flexibility to replace almost any window mechanism. Operation: S/S & L/L Supplied with a visible cable length of 175mm - overall length 200mm - provides a 10 to 15cm restriction. Locking - provides extra child safety and home security. Pack contains - restrictor, cover plates, screws and fitting instructions. Endures up to 550kg of force. CE & BS-EN Tested for added assurance. Perfect for use in homes, hotels, schools, nurseries etc. Black MPL /800/600/400mm length - Can also be cut down to suit the size of the profile (To a minimum of 400mm). 8 or 9mm adjustable Mushroom cams. Stainless Steel mushroom heads and faceplate. Designed to fit - Offset. Inline. Suits Slimline (13mm). Standard (16mm). Eurogroove. Backset between 20 and 25mm. 1000/800/600/400mm length - Can also be cut down to suit the size of the profile (To a minimum of 400mm). 8 or 9mm adjustable Mushroom cams. Stainless Steel mushroom heads and faceplate. Designed to fit - Offset. Inline. Suits Slimline (13mm). Standard (16mm). Eurogroove. Backset between 20 and 25mm. MPL014 MPL Flexi Espag 400/8 The Flexi Espag is the ultimate repair window espag, able to replace 99% of shoot bolts and espags. This universal espag rod is perfect for repair work, letting you finish jobs in just one visit. The adjustable mushroom cams, backset and retaining clips give this espag lock the flexibility to replace almost any window mechanism. Flexi Espag 400/9 The Flexi Espag is the ultimate repair window espag, able to replace 99% of shoot bolts and espags. This universal espag rod is perfect for repair work, letting you finish jobs in just one visit. The adjustable mushroom cams, backset and retaining clips give this espag lock the flexibility to replace almost any window mechanism. Flexi Espag 1000/8 The Flexi Espag is the ultimate repair window espag, able to replace 99% of shoot bolts and espags. This universal espag rod is perfect for repair work, letting you finish jobs in just one visit. The adjustable mushroom cams, backset and retaining clips give this espag lock the flexibility to replace almost any window mechanism. Flexi Espag 1000/9 The Flexi Espag is the ultimate repair window espag, able to replace 99% of shoot bolts and espags. This universal espag rod is perfect for repair work, letting you finish jobs in just one visit. The adjustable mushroom cams, backset and retaining clips give this espag lock the flexibility to replace almost any window mechanism. 1000/800/600/400mm length - Can also be cut down to suit the size of the profile (To a minimum of 400mm). 8 or 9mm adjustable Mushroom cams. Stainless Steel mushroom heads and faceplate. Designed to fit - Offset. Inline. Suits Slimline (13mm). Standard (16mm). Eurogroove. Backset between 20 and 25mm. 1000/800/600/400mm length - Can also be cut down to suit the size of the profile (To a minimum of 400mm). 8 or 9mm adjustable Mushroom cams. Stainless Steel mushroom heads and faceplate. Designed to fit - Offset. Inline. Suits Slimline (13mm). Standard (16mm). Eurogroove. Backset between 20 and 25mm. 1000/800/600/400mm length - Can also be cut down to suit the size of the profile (To a minimum of 400mm). 8 or 9mm adjustable Mushroom cams. Stainless Steel mushroom heads and faceplate. Designed to fit - Offset. Inline. Suits Slimline (13mm). Standard (16mm). Eurogroove. Backset between 20 and 25mm. 1000/800/600/400mm length - Can also be cut down to suit the size of the profile (To a minimum of 400mm). 8 or 9mm adjustable Mushroom cams. Stainless Steel mushroom heads and faceplate. Designed to fit - Offset. Inline. Suits Slimline (13mm). Standard (16mm). Eurogroove. Backset between 20 and 25mm. MPL010 MPL MPL MPL Davenport Burgess, 47 Wednesfield Road, Willenhall, West Midlands, WV13 1AL Tel: sales@davenport-burgess.com 21

12 Interested in Euro Profile Cylinders? See Page 28 for the Zone 1500 Range PATIO HARDWARE ANTI-PICK ANTI-SNAP ANTI-DRILL ANTI-BUMP 24...Patio Secondary Security Patio Accessories High Security Anti-bump Anti-pick Anti-drill Anti-snap 30 degree offset cam inhibits knock through Large range of key combinations High quality 5 & 6 pin tumbler mechanism

13 point patio hardware locking patio hardware White Patio Lock + 2 Keys Our DB patio door and window lock can be installed as a new fit or as a replacement for old or worn out locks. The button is pushed in to lock and the supplied key is used to unlock. This button lock is a simple & easy to fit security lock for doors and windows. Silver Patio Lock + 2 Keys Our DB patio door and window lock can be installed as a new fit or as a replacement for old or worn out locks. The button is pushed in to lock and the supplied key is used to unlock. This button lock is a simple & easy to fit security lock for doors and windows. Srz-S Zinc Car Steel Patio Rollers The SRZ-S Zinc Car Steel Wheel Roller is a single wheel patio door roller. It is suitable for use with all types of aluminium patio doors. This roller is supplied as a pair. Trph-N Stl Car Grp Patio Rollers The TRPH-N Stl Car Grp Patio Roller is a high stack roller with black colour wheels. It is suitable for upvc and aluminium inline sliding patio doors, and can be used to replace existing patio door rollers, provided that they were also high stack rollers. The patio roller is supplied in pairs. Lock width 45mm Lock Height 25mm Screw hole distance 32mm Lock width 45mm Lock Height 25mm Screw hole distance 32mm Wheel diameter 32mm Body width 17.5mm Body height 29mm. Wheel diameter 32mm Body width 17.5mm Body height 29mm Fixing screws included and can be mounted on a surface. Fixing screws included and can be mounted on a surface. MPL035 MPL MPL MPL Multi Purpose Bolt Brown Painted Multi Purpose Bolt White Painted CA865 Stainless Steel Patio Roller Suitable for use on all sliding and hinged doors, including timber, aluminium & garage doors. Key Locking, simply throw the bolt and then lock it into position. Supplied with screws and keys. Screw hole distance 32mm Heavy duty multi purpose locking bolt. Can be fitted to aluminium wooden sliding and hinged doors. Body Length: 82mm Body Width: 30mm Bolt Projection: 45mm Brandname : Maxus Colour : White This is the most popular patio door roller used on many different types of patio doors including Timber, Aluminium and upvc. The MPL067 Zinc Car Patio Roller is the most popular patio door roller used on many different types of patio doors including Timber, Aluminium and upvc. These patio rollers are supplied as a pair. Wheel diameter 38mm. Wheel height adjustment 40mm 49mm. Body width 18.5mm. Body height 30.5mm. Wheel diameter 38mm Wheel height adjustment 40mm 49mm Body width 18.5mm Body height 30.5mm. Fixing bolts included and rollers supplied in pairs MPL MPL MPL Brass Door Chain Traditional medium duty 80mm door chains. Supplied with screws. Packaging: Skin Packed Packaging Type : Skin Pack Colour : Brass Chrome Door Chain. Traditional medium duty 80mm door chains. Supplied with screws. Packaging: Skin Packed Packaging Type : Skin Pack Colour : Chrome Looking for a low price Euro Profile Cylinder solution? View the 1400 Contract Series Product Range on Page 32 MPL MPL Davenport Burgess, 47 Wednesfield Road, Willenhall, West Midlands, WV13 1AL Tel: sales@davenport-burgess.com 25

14 Key Blanks Key Cutting ACCESSORies PADLOCKS LOCKS Hardware Engraving Over 100,000 Products In Stock Including full access to our Key, Accessories and Machine catalogues EURO PROFILE CYLINDER LOCKS Visit us at Zone 1500 Series 32...DB 1400 Series Tel:

15 point EURO profile lockingcylinder locks EURO profile cylinder locks PROFESSIONALS CHOICE ANTI-PICK ANTI-SNAP ANTI-DRILL ANTI-BUMP 1500 HIGH SECURITY series The 1500 Euro cylinder series are ideal for indoor and outdoor use providing good levels of security. Available in brass, satin and chrome finishes. Plus thumbturn in the popular sizes, with 3 Nickel plated keys in header boxed or Visi pack variants. The cylinders have a large range of key combinations and can be re-pinned to order (Pinning Kit Ref. ZPK001) Series Euro Double Brass ZONE 5 pin 6 pin KBZ113 GC091-6 PIN KBZ112 GC090-5 PIN 1500 Series Euro Single ZONE 5 pin 6 pin KBZ113 GC091-6 PIN KBZ112 GC090-5 PIN Stock Ref. A B C No. Pins Finish Pack style 1500/30/30/PB POLISHED BRASS Header box /30/30/PB/V POLISHED BRASS Visi-pack 6.97 Stock Ref. A B C No. Pins Finish Pack style 1500/40/40/PB POLISHED BRASS Header box /40/40/PB/V POLISHED BRASS Visi-pack /30/35/PB POLISHED BRASS Header box /40/45/PB POLISHED BRASS Header box 8.01 Stock Ref. A B C No. Pins Finish Pack style 1500/30/PB BRASS Header box /30/PB/V BRASS Visi-pack /35/PB BRASS Header box /35/PB/V BRASS Visi-pack /40/PB BRASS Header box /40/PB/V BRASS Visi-pack /45/PB BRASS Header box /45/PB/V BRASS Visi-pack /30/SCP SATIN CHROME Header box /30/SCP/V SATIN CHROME Visi-pack /35/SCP SATIN CHROME Header box /35/SCP/V SATIN CHROME Visi-pack /40/SCP SATIN CHROME Header box /40/SCP/V SATIN CHROME Visi-pack /45/SCP SATIN CHROME Header box /45/SCP/V SATIN CHROME Visi-pack /30/35/PB/V POLISHED BRASS Visi-pack /30/40/PB POLISHED BRASS Header box /30/40/PB/V POLISHED BRASS Visi-pack /30/45/PB POLISHED BRASS Header box /30/45/PB/V POLISHED BRASS Visi-pack /30/50/PB POLISHED BRASS Header box /30/50/PB/V POLISHED BRASS Visi-pack /35/35/PB POLISHED BRASS Header box /35/35/PB/V POLISHED BRASS Visi-pack /35/40/PB POLISHED BRASS Header box /35/40/PB/V POLISHED BRASS Visi-pack /35/45/PB POLISHED BRASS Header box /35/45/PB/V POLISHED BRASS Visi-pack /35/50/PB POLISHED BRASS Header box /40/45/PB/V POLISHED BRASS Visi-pack /40/50/PB POLISHED BRASS Header box /40/50/PB/V POLISHED BRASS Visi-pack /40/55/PB POLISHED BRASS Header box /40/55/PB/V POLISHED BRASS Visi-pack /40/60/PB POLISHED BRASS Header box /40/60/PB/V POLISHED BRASS Visi-pack /45/45/PB POLISHED BRASS Header box /45/45/PB/V POLISHED BRASS Visi-pack /45/50/PB POLISHED BRASS Header box /45/50/PB/V POLISHED BRASS Visi-pack /45/55/PB POLISHED BRASS Header box /45/55/PB/V POLISHED BRASS Visi-pack /45/60/PB POLISHED BRASS Header box /35/50/PB/V POLISHED BRASS Visi-pack /45/60/PB/V POLISHED BRASS Visi-pack /35/55/PB POLISHED BRASS Header box /50/50/PB POLISHED BRASS Header box /35/55/PB/V POLISHED BRASS Visi-pack /50/50/PB/V POLISHED BRASS Visi-pack Davenport Burgess, 47 Wednesfield Road, Willenhall, West Midlands, WV13 1AL Tel: sales@davenport-burgess.com 29

16 euro point profile locking cylinder locks EURO profile cylinder locks PROFESSIONALS CHOICE 1500 ANTI-PICK ANTI-SNAP HIGH SECURITY ANTI-DRILL ANTI-BUMP 1500 Series Euro Double Thumbturn Stock Ref. A B C No. Pins Finish Pack style 1500/30/30T/PB BRASS Header box 1500/30/30T/PB/V BRASS Visi-pack ZONE 5 pin 6 pin KBZ113 GC091-6 PIN KBZ112 GC090-5 PIN series 1500/35/35T/PB BRASS Header box 1500/35/35T/PB/V BRASS Visi-pack 1500/35/45T/PB BRASS Header box 1500/40/40T/PB BRASS Header box 1500/40/40T/PB/V BRASS Visi-pack 1500 Series Euro Double Satin Chrome ZONE 5 pin 6 pin KBZ113 GC091-6 PIN KBZ112 GC090-5 PIN 1500/40/50T/PB BRASS Header box 1500/40/60T/PB BRASS Header box 1500/45/35T/PB BRASS Header box 1500/45/45T/PB BRASS Header box Stock Ref. A B C No. Pins Finish Stock Ref. A B C No. Pins Finish 1500/45/55T/PB BRASS Header box 1500/30/30/PB POLISHED BRASS /30/30/PB/V POLISHED BRASS /30/35/PB POLISHED BRASS /30/35/PB/V POLISHED BRASS /30/40/PB POLISHED BRASS /30/40/PB/V POLISHED BRASS /30/45/PB POLISHED BRASS /30/45/PB/V POLISHED BRASS /30/50/PB POLISHED BRASS /30/50/PB/V POLISHED BRASS /35/35/PB POLISHED BRASS /35/35/PB/V POLISHED BRASS /35/40/PB POLISHED BRASS /35/40/PB/V POLISHED BRASS /35/45/PB POLISHED BRASS /35/45/PB/V POLISHED BRASS /35/50/PB POLISHED BRASS /35/50/PB/V POLISHED BRASS /35/55/PB POLISHED BRASS /35/55/PB/V POLISHED BRASS /40/40/PB POLISHED BRASS /40/40/PB/V POLISHED BRASS /40/45/PB POLISHED BRASS /40/45/PB/V POLISHED BRASS /40/50/PB POLISHED BRASS /40/50/PB/V POLISHED BRASS /40/55/PB POLISHED BRASS /40/55/PB/V POLISHED BRASS /40/60/PB POLISHED BRASS /40/60/PB/V POLISHED BRASS /45/45/PB POLISHED BRASS /45/45/PB/V POLISHED BRASS /45/50/PB POLISHED BRASS /45/50/PB/V POLISHED BRASS /45/55/PB POLISHED BRASS /45/55/PB/V POLISHED BRASS /45/60/PB POLISHED BRASS /45/60/PB/V POLISHED BRASS /50/50/PB POLISHED BRASS /50/50/PB/V POLISHED BRASS /50/40T/PB BRASS Header box 1500/50/50T/PB BRASS Header box 1500/55/45T/PB BRASS Header box 1500/60/40T/PB BRASS Header box 1500/30/30T/SCP SATIN CHROME Header box 1500/30/30T/SCP/V SATIN CHROME Visi-pack 1500/35/35T/SCP SATIN CHROME Header box 1500/35/35T/SCP/V SATIN CHROME Visi-pack 1500/35/45T/SCP SATIN CHROME Header box 1500/40/40T/SCP SATIN CHROME Header box 1500/40/40T/SCP/V SATIN CHROME Visi-pack 1500/40/50T/SCP SATIN CHROME Header box 1500/40/60T/SCP SATIN CHROME Header box 1500/45/35T/SCP SATIN CHROME Header box 1500/45/45T/SCP SATIN CHROME Header box 1500/45/55T/SCP SATIN CHROME Header box 1500/50/40T/SCP SATIN CHROME Header box 1500/50/50T/SCP SATIN CHROME Header box 1500/55/45T/SCP SATIN CHROME Header box 1500/60/40T/SCP SATIN CHROME Header box 30 Davenport Burgess, 47 Wednesfield Road, Willenhall, West Midlands, WV13 1AL Tel: sales@davenport-burgess.com 31

17 point EURO profile lockingcylinder locks 1400 Contract Series NOTES 99 5 Pin 99 Anti-pick 99 Comes with 3 keys 99 Boxed 99 Satin Chrome Finish 1400 Series Euro Profile Cylinder Satin Chrome Budget Range Ref A B C 1400/30/30/SCP /30/30/SCP/V /35/35/SCP /35/35/SCP/V /35/40/SCP /35/40/SCP/V /35/45/SCP /35/45/SCP/V /35/50/SCP /35/50/SCP/V /35/55/SCP /35/55/SCP/V /40/40/SCP /40/40/SCP/V /40/45/SCP /40/45/SCP/V /40/50/SCP /40/50/SCP/V /40/55/SCP /40/55/SCP/V Ref A B C 1400/40/60/SCP /40/60/SCP/V /45/45/SCP /45/45/SCP/V /45/50/SCP /45/50/SCP/V /45/55/SCP /45/55/SCP/V /50/50/SCP /50/50/SCP/V /30/30T/SCP /30/30T/SCP/V /35/35T/SCP /35/35T/SCP/V /40/40T/SCP /40/40T/SCP/V /40/50T/SCP /40/50T/SCP/V /50/50T/SCP /50/50T/SCP/V Davenport Burgess, 47 Wednesfield Road, Willenhall, West Midlands, WV13 1AL Tel: sales@davenport-burgess.com

18 NOTES NOTES Davenport Burgess, 47 Wednesfield Road, Willenhall, West Midlands, WV13 1AL Tel:

19 point window locking hardware 36 Davenport Burgess, 47 Wednesfield Road, Willenhall, West Midlands, WV13 1AL Tel: Davenport Burgess, 47 Wednesfield Road, Willenhall, West Midlands, WV13 1AL