CERTIFICAT D'ASSEMBLAGE ASSEMBLY CERTIFICATE
|
|
- Marvin Tyler
- 6 years ago
- Views:
Transcription
1 12770 Rue Brault, Mirabel QC, J7J 1P3 Sans Frais / Toll Free Tel. : Fax : mtr@boulonsplus.net CERTIFICAT D'ASSEMBLAGE ASSEMBLY CERTIFICATE SVP PRENDRE NOTE QUE L'ASSEMBLAGE SUIVANT A ÉTÉ PRODUIT PAR BOULONS PLUS INC. ET NOMMÉ D'APRÈS LE NUMÉRO DE D'ASSEMBLAGE DU BOULON, DE L'ÉCROU AINSI QUE DE LA RONDELLE. PLEASE TAKE NOTE THAT THE FOLLOWING ASSEMBLY WAS DONE BY BOULONS PLUS INC. AND NAMED AFTER THE SET NUMBER MADE FROM THE BOLT, THE NUT AND THE WASHER. SET # X 2 3/4 A325-1 USA SET BLT+A563-C+F436-1 PL BOULON / BOLT LOT # JX MNPCOR ÉCROU / NUT LOT # UNYTIT RONDELLE / WASHER LOT # D0278 PRESTA PLACAGE / GALVANISATION # PLATING / GALVANISATION # L ANALYSE CHIMIQUE PROVIENT DU FOURNISSEUR D ACIER. ESSAIE DE CAPACITÉ ROTATIVE AVEC INDICATEUR DE TENSION. RÉSULTAT D ESSAI = ACCEPTÉ. L ASSEMBLÉE RENCONTRE LES EXIGENCES DE LA NORME ASTM A ÉCROUS LUBRIFIÉS. CHEMICAL ANALYSIS COMES FROM THE STEEL COMPANY. RC TEST DONE WITH TENSION MEASURING DEVICE. ROTATIONAL CAPACITY TEST = PASSED ASSEMBLY MEETS THE REQUIREMENTS OF THE ASTM A325 STANDARD. - NUTS LUBRICATED. Sylvain Vaudry, Assurance-Qualité / Authorized test Clerk
2 44225 Utica Road Utica, MI Tel:(586) Fax:(586) Date Printed: 08/28/2015 Corporation Customer: BOULONS PLUS Destination per Shipper No TEST CERTIFICATE Manufacturer: MNP Corporation Utica Road Utica, MI Certificate # Mechanical Testing Report Number MNP Part Number: BP A325 Family: Bolt Part Description: 1000,8,2750 STRUCTURAL BOLT Class: 2A Eng. Change: N/A Thread: 8/in Lot Number: JX Drive: Hex Purchase Order: Dimensional STD: PER PART PRINT Lot Size: 6,878 Mechanical Property STD: ASTM A325 Nominal Length: 2.75 Plating/Finish STD: N/A Nominal Thread Diameter: 1 in Patch STD: N/A Material Heat: Material Spec: 1039M-C Washer Material Lot: N/A N/A N/A Date Manufactured: 07/01/2015 Safety Lot Number: N/A QA STD: QAS Per ISO/TS 16949,ISO 9000,ASME B M Chemical Composition: C 0.41 Mn 0.94 P S Si 0.21 Cu 0.09 Ni 0.05 Cr 0.32 Mo 0.02 Al B Analysis Performed by: CHARTER STEEL Lab Id: MFG ID Marking Feature Checked # of Samples Specification Min/Max Units of Measure Results Method of Test Inspecting Facility Code Surface Discontinuities 1 Visual Pass SAE J MNP Forming Quality 1 Visual Pass Per above Standard MNP Routing Sequence 1 Visual Pass Per above Standard MNP Grade and Source ID 1 Visual Pass Per above MFG ID MNP Thread Acceptability 1 Pass Per above Standard MNP Core Hardness HRC JX MNP Surface Hardness N JX MNP Proof Load N/A Lbs. Pass Per above Standard MNP 10 Degree Wedge Tensile N/A Lbs JX MNP Inspecting Facility Name * per Source Control Plan Data shown applies only to parts tested. Product conforms to standard specified. Individual test results available upon request. Dimensional inspections performed per Manufacturing Control THIS REPORT IS NOT TO BE REPRODUCED EXCEPT IN FULL. The A2LA accreditation logo and certificate number applies to MNP Name: Title: Signed: Terri Simpson Auditor Manufactured in the USA Page: 1 of 1
3 Unytite, Inc. One Unytite Drive Peru, IL Tel Fax INSPECTION CERTIFICATE Job No: Job Information Certified Date: 2/17/16 Customer: Customer PO No: Lot Number: Ship To: Shipped Qty: Part Information Part No: A DH HHN Description: ASTM A563 Heavy Hex Nut, Grade DH, Plain Manufactured Quantity: 54,775 Applicable Specifications Specification Amend Specification Amend ASME B ASME B ASTM A ASTM F606/606M 2014 ASTM F812/F812M 2012 Test Results Test No: Test: A563 DH Mechanical Properties Description Hardness (HRC) Tempering Temp (800 degree F Min) Proof Load (Pass/Fail) (ASTM Min) Shape & Dimension ASME B Thread Precision ASME B Visual ASTM F812 Sample Inspection , ,050 Pass Pass Pass Certified Chemical Analysis Heat No Grade Manufacturer Origin C Mn P S Si Cr Ni Cu Gerdau USA Ameristeel Notes All tests are in accordance with the latest revisions of the methods prescribed in the applicable SAE and ASTM Specifications. The samples tested conform the specifications as described/listed above and were manufactured free of mercury contamination and there is no welding performed in the production of the products. No heats to which Bismuth, Selenium, Tellurium, or Lead was intentionally added have been used to produce products. The steel was melted and manufactured in the U.S.A. and the product was manufactured and tested in the U.S.A. We certify that this data is true representation of information provided by the material supplier and our testing laboratory. This certified material test report relates only to the items listed on this document and may not be reproduced except in full. 2/17/16 Sobkowiak, Bill - Supervisor, Quality Date Plex 2/17/16 12:00 PM bsobkowiak Page 1
4
5
6
7
CERTIFICAT D'ASSEMBLAGE ASSEMBLY CERTIFICATE
12770 Rue Brault, Mirabel QC, J7J 1P3 Sans Frais / Toll Free 1 888 657.2203 Tel. : 450 420.1839 Fax : 450 420.3882 mtr@boulonsplus.net www.boulonsplus.net CERTIFICAT D'ASSEMBLAGE ASSEMBLY CERTIFICATE SVP
More informationChemical composition. Type 2 as per F568: C ( ); P (max 0.048); S (max 0.058); Mn (min 0.74); B (min );
BS EN 14399 HIGH STRENGTH STRUCTURAL BOLTING FOR PRE LOAD Direct comparison as an alternative to ASTM HSFG Bolts ASTM A325M Type 1, ASTM A490M Type 1 or 2 BS EN 14399-3:2005 Grade 8.8 and 10.9 Chemical
More informationStandard Specification for Quenched and Tempered Steel Bolts and Studs 1
Designation: A 44 00 Standard Specification for Quenched and Tempered Steel Bolts and Studs This standard is issued under the fixed designation A 44; the number immediately following the designation indicates
More informationStandard Specification for High-Strength Steel Bolts, Classes 10.9 and , for Structural Steel Joints [Metric] 1
Designation: METRIC Standard Specification for High-Strength Steel Bolts, Classes 10.9 and 10.9.3, for Structural Steel Joints [Metric] 1 This standard is issued under the fixed designation A 490M; the
More informationDesignation: F
Designation: F 852 05 Standard Specification for Twist Off Type Tension Control Structural Bolt/Nut/Washer Assemblies, Steel, Heat Treated, 20/05 ksi Minimum Tensile Strength This standard is issued under
More informationODOT ITB Group 4 Item 33 Qty. 1
ODOT ITB 180-17 Group 4 Item 33 Qty. 1 ODOT ITB 180-17 Group 4 Item 34 Qty. 1 ODOT ITB 180-17 Group 4 Item 35 Qty. 1 ODOT ITB 180-17 Group 4 Item 36 Qty. 1 STRUCTURAL BOLTS NUCOR FASTENER TECHNICAL
More informationALLOY STEEL SOCKET SET SCREWS 1
1 IFI NOTE: - is reprinted with permission from the Annual Book of ASTM Standards, copyright American Society for Testing and Materials, 100 Barr Harbor Drive, West Conshohocken, PA 19428-2959, U.S.A,
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. FASTENAL COMPANY LABORATORY 1801 Theurer Boulevard Winona, MN Brad Partington Phone:
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 FASTENAL COMPANY LABORATORY 1801 Theurer Boulevard Winona, MN 55987 Brad Partington Phone: 507 453 8163 MECHANICAL Valid To: September 30, 2020 Certificate
More informationStandard Specification for High-Strength Bolts for Structural Steel Joints [Metric] 1
Designation: A 325M 00 METRIC An American National Standard Standard Specification for High-Strength Bolts for Structural Steel Joints [Metric] 1 This standard is issued under the fixed designation A 325M;
More informationStandard Specification for Carbon and Alloy Steel Nuts [Metric] 1
Designation: A 563M 04 METRIC Standard Specification for Carbon and Alloy Steel Nuts [Metric] 1 This standard is issued under the fixed designation A 563M; the number immediately following the designation
More informationFNW can handle all your hanger and fastener needs, all in one place. FNW products are sold exclusively at Ferguson.
FASTENERS PIPE HANGERS, SUPPORTS & STRUT ACCESSORIES FNW can handle all your hanger and fastener needs, all in one place. FNW products are sold exclusively at Ferguson. Quick Reference Nuts Heavy Hex Nuts...4
More informationStandard Specification for Carbons and Alloy Steel Nuts 1
Designation: A 563 07 Standard Specification for Carbons and Alloy Steel Nuts 1 This standard is issued under the fixed designation A 563; the number immediately following the designation indicates the
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 FASTENAL COMPANY LABORATORY - TAIWAN 1 434 Gangshan Road, 5 th Floor, Suite D Gangshan District, Kaoshiung City, TAIWAN 820 R.O.C. Brad Partington Phone: 507
More informationINSPECTION REPORT N o
Page: 1/11 PROJECT: TPI for Stud, bolt, nut and washer Ref: INS/SH-16/0074 BV Client: Simgetek Manufacturing and Engineering Co. Lnc Supplier: Jiaxing Haina Fastener Co., Ltd P/o nr: N/A (client to BV)
More informationAUDAS. Tel: Fax: No.259 Baichi north Rd.Haiyan.Zhejiang.
Standard State SECTION A : SCREW THREAD Basic elements of screw thread design ANSI/ASME B1.7M Nomenclature.Definitions and letter symbols for screw thread ASME B1.1 Unified inch screw thread ( UN and UNF
More informationDIN, EN, ASTM. Металлопрокат и трубы по стандартам. Поставляем металлопрокат по стандарту ASTM A563
Металлопрокат и трубы по стандартам DIN, EN, ASTM Поставляем металлопрокат по стандарту ASTM A563 Для заказа металлопроката или получения консультации обращайтесь по следующим контактам: Россия: +7 (495)
More informationBOLTS AND NUTS Square Bolts( Table 1 ) Hex Nuts ( Table 7 ) Heavy Hex Nuts (Table 7) Heavy Hex Structural Bolts ( Table 2 )
BOLTS AND NUTS 1493 An externally threaded fastener that must be assembled with a nut to perform its intended service is a bolt. (Example: heavy hex structural bolt.) An externally threaded fastener that
More informationGovernment Recognized Export House OHSAS 18001:2007 ISO 14001:2004 PED Approved Company.
Government Recognized Export House OHSAS 800:200 ISO 400:2004 PED Approved Company. Phone : +9 22 44 (2 Lines) Fax : +9 22 289 4 Email : export@reliablepipes.com domestic@reliablepipes.com Designation:
More informationContents. Grade 2, 5, 8 Hex Bolts 4. Heavy Hex Head Structural Bolts 6. A325 and A490 Tension Control Bolts (TC) 13. Nuts 22.
Who we are Amcan Jumax is the result of a merging between Boulons Jumax and Amcan Threaded Products, two successful companies well established, both with excellent reputations. The new entity is a bigger
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 FASTENAL COMPANY LABORATORY - TAIWAN No. 63, Dade 2 nd Rd. Gangshan District, Kaohsiung City, TAIWAN R.O.C. Brad Partington Phone: 507 453 8163 Matt Chen Phone:
More informationA Full Line of Pipe Products for Any Application
Standard Pipe Standard Pipe: SureThread and ERW Setting the standard in the standard pipe industry With a tradition of service and quality that s 80-plus years strong, Wheatland Tube is the only domestic,
More informationA Full Line of Pipe Products for Any Application
Standard Pipe SureThread and ERW: Setting the standard in the standard pipe industry With a tradition of service and quality that s 80-plus years strong, Wheatland Tube is the only domestic, full-line
More informationStructural Bolting. Notice the Grade 5 has a much smaller head configuration and a shorter shank then the grade A325 structural bolt.
Structural Bolting ASTM F3125/F3125M is a structural bolt specification covering inch and metric bolt grades. This specification contains 4 inch series bolting grades: A325, F1852, A490, and F2280. These
More informationKEEP YOUR RESOURCE MOVING.
LINER BOLTS KEEP YOUR RESOURCE MOVING. COLUMBUS McKINNON CORPORATION Leading the Industry Downtime in the grinding mill operation is caused by one of two things: regularly scheduled maintenance or unscheduled
More informationHEADLINE BUILDING MATERIALS
EADLINE BUILDING MATERIALS eb: www.hbm.ae l Email: commercial@hbm.ae eavy ex Structural Bolts ASTM A 325M Metric Series Dimensions P.O. Box 37366, Dubai, UAE l Tel: +971 4 3475675 l Fax: +971 4 347 5485
More informationStandard Specification for Steel Transmission Tower Bolts, Zinc-Coated and Bare 1
Designation: A 94 0 Standard Specification for Steel Transmission Tower olts, Zinc-Coated and are This standard is issued under the fixed designation A 94; the number immediately following the designation
More informationSPECIFICATION FOR HIGH STRENGTH STRUCTURAL BOLTS
UDC 621.882.211 [669.14.018.291] IS : 3757-1985 (Reaffirmed 2003) Edition 3.2 (1989-07) Indian Standard SPECIFICATION FOR HIGH STRENGTH STRUCTURAL BOLTS ( Second Revision ) (Incorporating Amendment Nos.
More informationStandard Specification for Steel Transmission Tower Bolts, Zinc-Coated and Bare 1
Designation: A 94 0 e Standard Specification for Steel Transmission Tower olts, Zinc-Coated and are This standard is issued under the fixed designation A 94; the number immediately following the designation
More informationProcedure for Testing Direct Tension Indicators (DTI) Assemblies
Procedure for Testing Direct Tension Indicators (DTI) Assemblies 1. Scope: This test is to ensure that the bolt will be at or above the specified minimum bolt tension after installation when the direct
More informationSURFACE VEHICLE STANDARD
400 Commonwealth Drive, Warrendale, PA 15096-0001 SURFACE VEHICLE STANDARD J429 Issued 1949-01 Revised 1999-01 REV. JAN1999 Submitted for recognition as an American National Standard Superseding J429 MAY1998
More informationHex Cap Screws Coarse & Fine Thread
INDUSTRIAL Product Description Hex head cap screws are manufactured to dimensional standards of ASME B18.2.1 and to various material and mechanical standards of ASTM and SAE. The length of a cap screw
More informationISO INTERNATIONAL STANDARD. Welding Studs and ceramic ferrules for arc stud welding
INTERNATIONAL STANDARD ISO 13918 Second edition 2008-02-15 Welding Studs and ceramic ferrules for arc stud welding Soudage Goujons et bagues céramiques pour le soudage à l'arc des goujons Reference number
More informationISO INTERNATIONAL STANDARD. Tapping screw and washer assemblies with plain washers. Vis à tôle à rondelle plate imperdable
INTERNATIONAL STANDARD ISO 10510 Second edition 2011-04-01 Tapping screw and washer assemblies with plain washers Vis à tôle à rondelle plate imperdable Reference number ISO 10510:2011(E) ISO 2011 ISO
More informationTAPTITE Fasteners. High Performance Thread Rolling Screws for Metals
TAPTITE 2000 Fasteners High Performance Thread Rolling Screws for Metals TAPTITE 2000 thread forming technology joins two unique concepts and advances fastener performance to new levels. TAPTITE 2000 fasteners
More informationBRASS/BRONZE GRADES STOCKED AUTOMATIC EXCEPTIONS TO THE SPECS LISTED ARE: LINE MARKING AND INSPECTION (I.E. MAG., SONIC, ETC.) MACHINABILITY RATINGS
144 BRASS/BRONZE GRADES STOCKED 144 SPECIFICATIONS BRASS ALLOY 360, FREE CUTTING, 1/2 HARD CHEMISTRY ONLY TO: ASTM-B-16 AND SAE CA - 360 SPECIFICATIONS NI-AL-BRZ (ALLOY C-630) AMS-4640, ASTM-B-150, ASME-B-150,
More informationProcedure for Wrench Calibration and Snug Tightening
Procedure for Wrench Calibration and Snug Tightening 1. Scope: This procedure provides the method for calibration of a manual torque wrench or an adjustable impact wrench and the snug tightening procedure
More informationListing Report: AB Reissue Date: 01/21/16 This report is subject to annual review
Reissue Date: 01/21/16 CSI 06 05 23 PRODUCT: Threaded Fasteners DIVISION: Wood, Plastics, and Composites (06) SECTION: Wood, Plastic, and Composite Fastenings (05 23) Report Holder American Bolt and Screw
More informationREQUEST FOR INFORMATION (RFI)
Planning, Development & Facilities 349 Magnolia Avenue Glendale, California 91204 Tel: 818.507.0201 Fax: 818.507.4911 Project Name: Jefferson ES-12 Classroom Bldg. DSA No: A#:03-114361, File#:19-41 District
More informationLimited Warranty And Exclusive Remedy
Limited Warranty And Exclusive Remedy THE WORLD LEADER Deepak Fasteners Ltd., through its Unbrako Division and associated companies, warrants that these products conform to industry standards specified
More informationPIP STF05121 Anchor Fabrication and Installation Into Concrete
June 2017 Structural PIP STF05121 Anchor Fabrication and Installation Into Concrete PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES In an effort to minimize the cost of process industry facilities, this
More informationISO INTERNATIONAL STANDARD. Fasteners Torque/clamp force testing. Éléments de fixation Essais couple/tension. First edition
Provläsningsexemplar / Preview INTERNATIONAL STANDARD ISO 16047 First edition 2005-02-01 Fasteners Torque/clamp force testing Éléments de fixation Essais couple/tension Reference number ISO 16047:2005(E)
More informationStandard Specification for Carbon and Alloy Steel Externally Threaded Metric Fasteners 1
Designation: F 568M 04 METRIC Standard Specification for Carbon and lloy Steel Externally Threaded Metric Fasteners This standard is issued under the fixed designation F 568M; the number immediately following
More informationTHE WORLD LEADER.
THE WORLD LEADER www.unbrako.com unbrakosales@unbrako.com Securing the World For more than 100 years, Unbrako has designed and manufactured premium and custom designed fasteners and forged components for
More informationSwivel Hoist Ring RIGGING ACCESSORIES. Color coded to distinguish between UNC (Red) and Metric (Silver) thread types.
RIGGING ACCESSORIES Color coded to distinguish between UNC (Red) and Metric (Silver) thread types. Available in UNC and Metric thread sizes. UNC threads available in sizes from 800 pounds to 100,000 pounds,
More informationTHE WORLD LEADER.
THE WORLD LEADER www.unbrako.com Securing the World For more than 100 years, Unbrako has designed and manufactured premium and custom designed fasteners and forged components for demanding applications.
More informationNTTC Tank Truck Week Awareness Gaskets/Fasteners/Flanges
NTTC Tank Truck Week 2015 Awareness Gaskets/Fasteners/Flanges OVERVIEW 1. Flange 101 Flange Types Inspection & Assembly 2. Gaskets 101 Stress Tightness 3. Fastener 101 Yield Lubrication Bolted Flanged
More informationISO Prevailing torque type hexagon regular nuts (with non-metallic insert) Property classes 5, 8 and 10
Provläsningsexemplar / Preview INTERNATIONAL STANDARD ISO 7040 Third edition 2012-12-15 Prevailing torque type hexagon regular nuts (with non-metallic insert) Property classes 5, 8 and 10 Écrous hexagonaux
More informationISO Prevailing torque type hexagon nuts (with non-metallic insert), style 2 Property classes 9 and 12
INTERNATIONAL STANDARD ISO 7041 Fourth edition 2012-05-15 Prevailing torque type hexagon nuts (with non-metallic insert), style 2 Property classes 9 and 12 Écrous hexagonaux autofreinés (à anneau non métallique),
More information012: 2015 CEB SPECIFICATION GALVANIZED STEEL WIRE (EXCEPT SHIELDING WIRE FOR TOWER LINE APPLICATION)
012: 2015 CEB SPECIFICATION GALVANIZED STEEL WIRE (EXCEPT SHIELDING WIRE FOR TOWER LINE APPLICATION) CEYLON ELECTRICITY BOARD SRI LANKA Telephone: +94 11 232 8051 Fax: +94 11 232 5387 CONTENTS Page 1.0
More informationInstruction Manual for installing
Instruction Manual for installing Preloaded (HSFG) Bolting with TurnaSure DIRECT TENSION INDICATORS CE Marked EN 14399-9 TurnaSure LLC TABLE OF CONTENTS Introduction... 1 Theory of Preloaded Bolting Assemblies...
More informationISO INTERNATIONAL STANDARD. Cross recessed pan head drilling screws with tapping screw thread
INTERNATIONAL STANDARD ISO 15481 First edition 1999-08-01 Cross recessed pan head drilling screws with tapping screw thread Vis autoperceuses à tête cylindrique bombée large à empreinte cruciforme, avec
More information2016 AASHTO BRIDGE COMMITTEE AGENDA ITEM: 24 (REVISION 1) SUBJECT: LRFD Bridge Design Specifications: Section 6, Various Articles (2)
2016 AASHTO BRIDGE COMMITTEE AGENDA ITEM: 24 (REVISION 1) SUBJECT: LRFD Bridge Design Specifications: Section 6, Various Articles (2) TECHNICAL COMMITTEE: T-14 Steel REVISION ADDITION NEW DOCUMENT DESIGN
More informationThreaded Products Gaskets & Seals Precision Machining
Threaded Products Gaskets & Seals Precision Machining FIRST CALL, ONLY CALL Dan-Loc Group was formed with the merger of Texthread, Dan-Loc Bolt & Gasket, and Spensall. Dan-Loc Group is a manufacturer and
More informationDisclaimer. Socket Products Socket depth limits maximum torque. Torque figures are based on 80% of maximum torque for a given key size.
E546 V3 (1/17) Disclaimer Torque values listed in this book are based on mathematical calculations and experimental data. The values are valid only when the matched strength system listed is used. The
More informationTable of Contents. GARD Specialists Co., Inc. GARD Specialists Co., Inc. P.O. Box 157 Eagle River, WI Fax
Table of Contents Heavy Duty Fasteners F-911 Fasteners Introduction... 2 F-911 Fasteners Specifications... 2 F-911 Fasteners Torque Chart... 3 Cap Screws - F-911 Alloy Hex Head, Coarse... 4-9 Assortments,
More informationTechnical Specifications: Supply of Seamless Grade TP304L Pipe and Grade WP304L Pipework Fittings to the ITER Organization (IO).
IDM UID: R22L3M ver 1.4 Technical Specifications: Supply of Seamless Grade TP304L Pipe and Grade WP304L Pipework Fittings to the ITER Organization (IO). Contents 1 Terms and Acronyms... 3 2 Background...
More informationFASTENERS. Specialist in Hi-Tensile & Mild Steel
FASTENERS Specialist in Hi-Tensile & Mild Steel Fasteners Business Established in 2003, Karamtara's Fasteners business vertical provides truly global services. We provide special industrial fasteners to
More informationSwivel Hoist Ring Page 142
Swivel Hoist Ring Page 142 Hoist Rings Color coded to distinguish between UNC (Red) and Metric (Silver) thread types HR-125 M HR-125 Available in UNC and Metric thread sizes. UNC threads available in sizes
More informationISO INTERNATIONAL STANDARD. Cross recessed raised countersunk head drilling screws with tapping screw thread
INTERNATIONAL STANDARD ISO 15483 First edition 1999-08-01 Cross recessed raised countersunk head drilling screws with tapping screw thread Vis autoperceuses à tête fraisée bombée à empreinte cruciforme,
More informationOverview of Textron Systems Supplier First Article Inspection (FAI) expectations
Overview of Textron Systems Supplier First Article Inspection (FAI) expectations See your Supplier Quality Engineer with questions PURPOSE Ensure the product being delivered meets drawing requirements
More informationSTAINLESS INDUSTRY LIST
The Worlds Largest Supplier of Socket Screws STAINLESS INDUSTRY LIST CAT#SS0806 Melbourne Sydney Brisbane Perth Auckland BRIGHTONBEST International (AU) PTY LTD. W e are proud to be a TEAM company A cornerstone
More informationM-RAIL Sismet Road, Mississauga, L4W 1V6 TEST REPORT FOR MLEVEL GUARD SYSTEMS
M-RAIL 1625-9 Sismet Road, Mississauga, L4W 1V6 TEST REPORT FOR MLEVEL GUARD SYSTEMS Report of mechanical load testing of the metal stand-off system for compliance with the applicable requirements of the
More informationCONCRETE ACCESSORIES BAR-LOCK REBAR COUPLER SYSTEM
CONCRETE ACCESSORIES BAR-LOCK REBAR COUPLER SYSTEM quick and easy to install no special installation equipment high strength excellent for new construction and rehab projects Bar-Lock Coupler System* ICBO
More informationInstruction Manual for installing
Instruction Manual for installing Preloaded (HSFG) Bolting with TurnaSure DIRECT TENSION INDICATORS TurnaSure LLC TABLE OF CONTENTS Introduction... 1 Theory of Preloaded Bolting Assemblies... 2 Tightening
More informationMidwest Roadside Safety Facility
B 64" 1626 602'-8 1/16" 183695 548'-0" 167030 1 2 3 4 5 6 7 8 9 10 11 12 14 15 16 17 18 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 373839 40 25 IMPACT 1500A 48" 12 27'-5" 8355 [] 3x7 CL A Galvanized
More informationTECHNICAL CORRECTION October Process Industry Practices Structural. PIP STF05121 Fabrication and Installation of Anchor Bolts
TECHNICAL CORRECTION October 2006 Process Industry Practices Structural PIP STF05121 Fabrication and Installation of Anchor Bolts PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES In an effort to minimize
More information(R) Aerospace First Article Inspection Requirement FOREWORD
AEROSPACE STANDARD AS9102 Technically equivalent to AECMA pren 9102 Issued 2000-08 Revised 2004-01 REV. A Supersedes AS9012 (R) Aerospace First Article Inspection Requirement FOREWORD In December 1998,
More informationISO INTERNATIONAL STANDARD. Hexalobular socket cheese head screws. Vis à métaux à tête cylindrique basse à six lobes internes
INTERNATIONAL STANDARD ISO 14580 First edition 2001-09-01 Hexalobular socket cheese head screws Vis à métaux à tête cylindrique basse à six lobes internes Reference number ISO 14580:2001(E) ISO 2001 PDF
More informationERECTION & CONSTRUCTION
ERECTION & CONSTRUCTION High Strength Structural Bolting Author: Clark Hyland Affiliation: Steel Construction New Zealand Inc. Date: 24 th August 2007 Ref.: Key Words High Strength Bolts; Property Class
More informationInternational Organization for Standardization. American National Standards Institute
DFTG1329 Standards are published documents that set up rules, specifications and protocols designed to ensure consistency, compatibility and reliability of products, materials and services. Standards are
More informationSUBMITTAL INFORMATION "BOLTS, NUTS AND FLAT WASHERS" "ABSTRACT OF ASTM A307 GRADE A AND B" CARBON STEEL BOLTS AND STUDS, 60,000 PSI TENSILE STRENGTH
"BOLTS, NUTS AND FLAT WASHERS" "ABSTRACT OF ASTM A307 GRADE A AND B" CARBON STEEL BOLTS AND STUDS, 60,000 PSI TENSILE STRENGTH GRADE: LOW CARBON STEEL GRADE A GRADE B PHOSPHOROUS MAX % 0.06 0.04 SULFUR,
More informationScrew selecting guide for Norex & Noroc panels installation (metal screw)
Screw selecting guide for Norex & Noroc panels installation (metal screw) Anchor Capacity (lbs.) (1)()() Girt thickness (2) Panel type NOREX Mfg. 2 x TEKS ( 1) 2 x TEKS ( 28) 2 x IMPAX SD ( 1) 2 x IMPAX
More informationLOAD INDICATOR WASHERS USING DTI S WITH TENSION CONTROL BOLTS
Studying the use of DTI s in conjunction with Tension Control Bolts and the ramifications associated with this practice. The use of Direct Tension Indicator Washers with Tension Control Bolts has been
More informationHilti, Inc South 122 nd East Avenue Tulsa, OK
Attached are page(s) from the 2012 Hilti North American MI/MQ Technical Guide Volume 3. For complete details on this product, including data development, general suitability, installation, and corrosion
More informationEvaluation of In-Pavement Light Fixture Designs and Performance
Evaluation of In-Pavement Light Fixture Designs and Performance Presented to: IES ALC Fall Technology Meeting By: Joseph Breen Date: Background In-Pavement Light Fixture Assemblies Utilize a Circle of
More information1 Scope. 2 Normative references. 3 Dimensions. Page 2 DIN :
Page 2 1 Scope This standard specifies dimensions and technical delivery conditions for stud bolts with metric thread made of steel, stainless steel or nonferrous metal. 2 Normative references This standard
More informationLetter of Transmittal/Submittal
Letter of Transmittal/Submittal FROM: TO: Baker Concrete Construction 1904 Jasper Street DATE JOB NUMBER 09/23/10 Aurora, CO 80011 9921 303.367.8111 ATTENTION Nick Dewald 937.536.9000 RE: Bruce Herman
More informationHardness Core Rc 33 39
Earnest echnical Bulletin with udiorx Drive pecifications udiorx Drive Benefits - High ensile trength - amper Resistant - Easy access at repair facilities Industry pplications - Rail Car Builders - Bogie
More informationThis document is a preview generated by EVS
INTERNATIONAL STANDARD ISO 10511 Third edition 2012-12-15 Prevailing torque type hexagon thin nuts (with non-metallic insert) Écrous hexagonaux bas autofreinés (à anneau non métallique) Reference number
More informationONE-LOK Series SLC/SLCE Pipe Restraint for AWWA C909 PVC Pipe
ONE-LOK Series SLC/SLCE Restraint for AWWA Use the SIGMA ONE-LOK Series SLC/SLCE restraint for AWWA pipe at mechanical or push-on joint ductile iron fittings. The ONE-LOK Restraint Systems can successfully
More informationC-Clamps and Lifting Eyes (Eye Bolts)
0-C-Clamps & Lifting Eyes-R 2/21/08 9:42 PM Page 1 C-Clamps A B C Armstrong C-Clamps When your requirements call for clamps, specify Armstrong the most accepted name in the business. When you see Armstrong
More informationISO INTERNATIONAL STANDARD. Hexagon bolts with flange with metric fine pitch thread Small series Product grade A
INTERNATIONAL STANDARD ISO 15072 First edition 1999-12-15 Hexagon bolts with flange with metric fine pitch thread Small series Product grade A Vis à tête hexagonale à embase cylindro-tronconique, à filetage
More information3400 E. WALNUT STREET COLMAR, PA DORMAN / ROCKFORD
WEATHERLY #770 D-2013-A JUNE 2013 SUPERSEDES R-2009-F APR. 2009 2013 DORMAN / ROCKFORD 1-800-523-2492 Corporate Office & Customer Service www.dormanproducts.com 2013 Dorman Products, Inc. No reproduction
More informationPIPING NOMENCLATURE. Header Branch connection Valve Flange Expansion joint Expansion loop Pipe support Reducer Elbow
PIPING COMPONENTS Piping components are mechanical elements suitable for joining or assembly into pressure-tight fluid containing piping systems. Components include pipe, tubing, fittings, flanges, gaskets,
More informationIn normal joints, the clamping force should equal the working load. In gasketed joints, it should be sufficient to create a seal.
Fastener Quality Act Information Unbrako offers this link to the National Institute of Standards homepage on the Fastener Quality Act as an aide to individuals who need detailed and complete information
More informationSCREWS MACHINE. Slotted Phillips Six-Lobe Square Recess Pozi-Alternative Combination Recess Military Commercial Metric Inch
SCREWS MACHINE Slotted Phillips Six-obe Square Recess Pozi-Alternative Combination Recess Military Commercial Metric Inch INCH COMMERCIA COMBINATION DRIVE BINDING UNDERCUT FAT HEX WASHER Green (Header
More informationNPS/001/010 Technical Specification for Fasteners and Fixings for Wood Pole Overhead Lines and General Construction Works
Version:- 4.0 Date of Issue:- August 2014 Page 1 of 13 NPS/001/010 Technical Specification for Fasteners and Fixings for Wood Pole Overhead Lines and General Construction Works 1. Purpose The purpose of
More informationAS/NZS 1214:2016 Hot-dip galvanized coatings on threaded fasteners (ISO metric coarse thread series) AS/NZS 1214:2016
(ISO 10684:2004, MOD) Australian/New Zealand Standard Hot-dip galvanized coatings on threaded fasteners (ISO metric coarse thread series) AS/NZS 1214:2016 This joint Australian/New Zealand standard was
More informationISO INTERNATIONAL STANDARD. Fasteners Torque/clamp force testing. Éléments de fixation Essais couple/tension. First edition
INTERNATIONAL STANDARD ISO 16047 First edition 2005-02-01 Fasteners Torque/clamp force testing Éléments de fixation Essais couple/tension Reference number ISO 16047:2005(E) ISO 2005 PDF disclaimer This
More informationFluid Sealing Association
Fluid Sealing Association STANDARD FSA-MG-501-02 STANDARD TEST METHOD FOR INWARD BUCKLING OF SPIRAL-WOUND GASKETS 994 Old Eagle School Road, Suite 1019 Wayne, Pennsylvania 19087-1866 Phone: (610) 971-4850
More informationSANDVIK 20C STRIP STEEL
SANDVIK 20C STRIP STEEL DATASHEET Sandvik 20C is a hardened and tempered carbon steel characterized by good properties in respect of: Fatigue strength and wear resistance Hardness combined with ductility
More informationDRAFT UGANDA STANDARD
DRAFT UGANDA STANDARD DUS 193-1 First Edition 2018-09-dd Steel wires and wire products for fencing Part 1: Barbed wires Specification Reference number UNBS 2018 Compliance with this standard does not,
More informationOur Values. Profile. Mission. Engineering Know-How. Performance. Security
(86-272-56) Our Values Performance A SOLUTION OF High Strength Anti Loose Corrosion Chemical Resistance Solution Profile SYNERGIX, a SINGAPORE SME company since year 2000. It s operation specialize in
More information,/;/ ...- H. ~.,,\"\ ~- ~ " "',. Nickel Alloy Ie Specialty Wire. OJ ~ / /., RE D. mog &CO~ 1-BOO-53-LOOS ~~.\. '.., '\" "" ..
- w -. - a: -'~ - -.. ~,, I ''''. ~-- " ' ~ " "',. " ~~.\. '.., '\" "" H. ~.,,\"\ -\\ \; '. \\~~ ~ RE D...- I - ~- -- ---. "- I " '.1., / /.,.1 / )!)~ "'-:.. ~ -; -/' /. / i "/ i \ ~.. ~,/;/ / ~ Specialists
More informationTechnical Specifications Guide For Fasteners
fastrite_2011_fut.ai 8/4/11 4:29:01 PM Technical Specifications Guide For Fasteners C M Y CM MY CY CMY K Important Disclaimer All of the information provided in this publication is intended for reference
More informationPlain bearings Wrapped bushes
BRITISH STANDARD BS ISO 3547-5:2007 Licensed Copy: :FULLNAME, : DATE, Uncontrolled Copy, (c) BSI Plain bearings Wrapped bushes Part 5: Checking the outside diameter ICS 21.100.10 National foreword Licensed
More informationUL / FM E-1 FIRE PROTECTION PRODUCTS INDICATOR POST FEATURES. *Applies to "ORDER LENGTH" codes B through F; code A has 22" adjustment.
UL / FM MUELLER Indicator Post are used in fire protection systems and perform several functions. The Indicator Post provides a means to operate a buried or otherwise inaccessible valve. Also, the Indicator
More informationREPORT HOLDER: SFS INTEC 1045 SPRING STREET WYOMISSING, PENNSYLVANIA EVALUATION SUBJECT:
0 Most Widely Accepted and Trusted ICC ES Evaluation Report ICC ES 000 (800) 423 6587 (562) 699 0543 www.icc es.org ESR 3870 Reissued 01/2018 This report is subject to renewal 01/2019. DIVISION: 05 00
More informationMETRIC FASTENERS 1520 METRIC FASTENERS
1520 METRIC FASTENERS METRIC FASTENERS A number of American National Standards covering metric bolts, screws, nuts, and washers have been established in cooperation with the Department of Defense in such
More informationHex Bolts & Hex Screws DIN 931/ISO4014 & DIN 933/ISO4017
Hex Bolts & Hex Screws DIN 931/ISO4014 & DIN 933/ISO4017 Diameter: M27 to M52 up to 500 MM in Length Diameter: M16 to M42 up to 300 MM in Length up to 300 MM in Length up to 300 MM in Length up to 300
More information