Hardness Core Rc 33 39

Size: px
Start display at page:

Download "Hardness Core Rc 33 39"

Transcription

1 Earnest echnical Bulletin with udiorx Drive pecifications udiorx Drive Benefits - High ensile trength - amper Resistant - Easy access at repair facilities Industry pplications - Rail Car Builders - Bogie Manufacturers - Mining Camrail bolts with an udiorx drive are assembled using a special orx drive tools. he udiorx drive will shear off when the proper torque is achieved when installed with the camrail flange lock nut. 1.) Manufacture: Camrail bolts are manufactured in accordance with the latest revision of the following industry standards: E J429 ME B1.1 E J122 ME B Material and Physical Properties hread Requirements urface Discontinuities Inspection and Quality ssurance for General Purpose Fasteners 2.) hreads: hreads are made to the requirements of NI B1.1 Unified hreads, 2 Fit. hread acceptance shall be based on NI B1.3, ystem ) Material and Physical Properties: Made from alloy steel as specified by E J429 for Grade 8. Chemical Composition Requirements (with addition of alloying elements) Carbon (C) Min Phosphorus (P) ulfur () E J429 Gr / Hardness Core Rc ensile trength: Yield trength: Proof oad trength: 150,000 psi min 130,000 psi min 120,000 psi min 4.) Finish: Plain with Cam Koat lubricant. Camrail Bolt, udiorx, and CamKoat are registered trademarks of ccument Cleveland tlanta Indianapolis England EarnestMachine.com

2 Earnest echnical Bulletin with udiorx Drive pecifications Camrail bolts with an external drive udiorx are available on six head styles (Flat, Pan, russ, Oval, High Oval and Dome). Flat Head with udiorx Drive Head Dia Head Height udiorx udiorx H Drive Height 3/ / E-20 5/8 3/ / E-20 5/8 3/ / E-20 5/8 3/ / E-20 5/8 7/ / E-20 5/8 7/ E-20 5/8 Pan Head with udiorx Drive Head Dia Head Height udiorx udiorx H Drive Height 7/ / E-20 5/8 7/ E-20 5/8 7/ / E-20 5/8 7/ E-20 5/8 7/ / E-20 5/8 Dome Head with udiorx Drive Head Dia Head Height udiorx udiorx H Drive Height 7/ / E-20 5/8 Cleveland tlanta Indianapolis England EarnestMachine.com

3 Earnest echnical Bulletin with udiorx Drive pecifications russ Head with udiorx Drive Head Dia Head Height udiorx udiorx H Drive Height 5/ / E-20 5/8 5/ / E-20 5/8 3/ E-20 5/8 3/ / E-20 5/8 3/ / E-20 5/8 Oval Head with udiorx Drive Head Dia Head Height udiorx udiorx H C Drive Height ref 7/ / E-20 5/8 7/ E-20 5/8 High Oval Head with udiorx Drive Head Dia Head Height udiorx udiorx H C Drive Height ref 7/ / E-20 5/8 Cleveland tlanta Indianapolis England EarnestMachine.com

4 Earnest echnical Bulletin with Internal ORX Drive Camrail bolts made with an internal orx drive are designed for ease of assembly and are available in three head styles Flat, Pan and Oval. ORX Drive Benefits Industry pplications - High ensile trength - Rail Car Builders - pproved for use at freight car - Bogie Manufacturers repair facilities - Mining 1.) Manufacture: Camrail bolts are manufactured in accordance with the latest revision of the following industry standards: E J429 ME B1.1 E J122 ME B Material and Physical Properties hread Requirements urface Discontinuities Inspection and Quality ssurance for General Purpose Fasteners 2.) hreads: hreads are made to the requirements of NI B1.1 Unified hreads, 2 Fit. hread acceptance shall be based on NI B1.3, ystem ) Material and Physical Properties: Made from alloy steel as specified by E J429 for Grade 8. Chemical Composition Requirements (with addition of alloying elements) Carbon (C) Min Phosphorus (P) ulfur () E J429 Gr / Hardness Hardness Core Rc ensile trength: Yield trength: Proof oad trength: 150,000 psi min 130,000 psi min 120,000 psi min 4.) Finish: Plain with Cam Koat lubricant., orx and CamKoat are trademarks of ccument Cleveland tlanta Indianapolis England EarnestMachine.com

5 Earnest echnical Bulletin with Internal ORX Drive with an internal drive orx drive are available on three head styles (Flat, Oval, and Pan). Flat Head with orx Drive Head Dia Head Height orx H Drive 3/ / X-70 3/ X-70 3/ / X-70 3/ / X-70 3/ / X-70 Oval Head with orx Drive Head Dia Head Height orx H Drive 7/ / X-90 7/ X-90 7/ / X-90 Pan Head with orx Drive Head Dia Head Height orx H Drive 7/ / X-90 Cleveland tlanta Indianapolis England EarnestMachine.com

6 Earnest echnical Bulletin Una-Driv Bolts and Flange ock Nuts 7/8/15 knurled bearing face 325 Internal hex drive for easy installation when installed with a Uni-Driv impact wrench Una-Driv M bolts are manufactured with an internal hex socket drive in the threaded end to permit tightening on one side of the assembly. he Una-Driv fastener assembly is commonly used in the locomotive industry for maintenance and repair on rail cars. he serrations under the head also ensure easy assembly. he regular button head design distributes the load over a large area for added joint strength. he Una-Driv impact wrench is designed to hold the bolt in place while tightening with the Una Driv Flange ock Nut. Knurling on bearing face prevents head from rotating ssembled with flange lock nut to prevent loosening Hex key, that is part of the Una-Driv impact wrench, holds screw in place during assembly Una-Driv Impact Wrench Made from carbon or alloy steel meeting the requirements of M 325 and E J429 for Grade 5. ensile trength: 120,000 psi min Yield trength: 92,000 psi min Proof oad trength: 85,000 psi min Core Hardness Rc Finish: Phos and Oil 325 Head Dia Head Height Hex H Drive 5/ / /16 5/ / /16 5/ /16 5/ / /16 5/ / /16 5/ /16 3/ / /8 3/ /8 7/ / /8 7/ /8 Cleveland tlanta Indianapolis England EarnestMachine.com

7 Earnest echnical Bulletin Una-Driv Bolts and Flange ock Nuts 7/8/15 Una-Driv Flange ock Nuts are designed to be used with Una Driv bolts to ensure proper clamp load is achieved. he locking feature in the top section of the nut resists loosening. Una-Driv flange lock nuts are made to exceed the strength of the Una Driv bolts they are designed to be used with. Proof oad trength: 120,000 psi min Hardness: Rc 36 max WF F Flange Dia B Head Height H Flange hickness K min 5/ / / / / / Una-Driv is a registered trademark of BBC Fasteners Cleveland tlanta Indianapolis England EarnestMachine.com

01 FASTENERS JULY FASTENERS 1

01 FASTENERS JULY FASTENERS 1 01 FASTENERS 4 Bolts 22 Socket Screws 30 Nuts 39 Washers 53 Screws 72 Threaded Rods & Studs 73 Rivets, Rivnuts & Accessories 82 Retaining Rings 84 Pins, Links, & Sleeves 91 Key Stock & Assortments 90 Anchors

More information

Disclaimer. Socket Products Socket depth limits maximum torque. Torque figures are based on 80% of maximum torque for a given key size.

Disclaimer. Socket Products Socket depth limits maximum torque. Torque figures are based on 80% of maximum torque for a given key size. E546 V3 (1/17) Disclaimer Torque values listed in this book are based on mathematical calculations and experimental data. The values are valid only when the matched strength system listed is used. The

More information

Sockets. Dimensions; Mechanical & Performance Requirements. Socket Head Cap Screws Body & Grip Lengths - Socket Cap Screws...

Sockets. Dimensions; Mechanical & Performance Requirements. Socket Head Cap Screws Body & Grip Lengths - Socket Cap Screws... imensions; Mechanical & Performance Requirements Socket Head Cap Screws... 2-4 Body & Grip Lengths - Socket Cap Screws... 5-6 Low Head Socket Cap Screws... 7 Button Head Socket Cap Screws... 8 Flat Head

More information

ISO INTERNATIONAL STANDARD. Fasteners Torque/clamp force testing. Éléments de fixation Essais couple/tension. First edition

ISO INTERNATIONAL STANDARD. Fasteners Torque/clamp force testing. Éléments de fixation Essais couple/tension. First edition Provläsningsexemplar / Preview INTERNATIONAL STANDARD ISO 16047 First edition 2005-02-01 Fasteners Torque/clamp force testing Éléments de fixation Essais couple/tension Reference number ISO 16047:2005(E)

More information

Table of Contents. GARD Specialists Co., Inc. GARD Specialists Co., Inc. P.O. Box 157 Eagle River, WI Fax

Table of Contents. GARD Specialists Co., Inc. GARD Specialists Co., Inc. P.O. Box 157 Eagle River, WI Fax Table of Contents Heavy Duty Fasteners F-911 Fasteners Introduction... 2 F-911 Fasteners Specifications... 2 F-911 Fasteners Torque Chart... 3 Cap Screws - F-911 Alloy Hex Head, Coarse... 4-9 Assortments,

More information

Evaluation of In-Pavement Light Fixture Designs and Performance

Evaluation of In-Pavement Light Fixture Designs and Performance Evaluation of In-Pavement Light Fixture Designs and Performance Presented to: IES ALC Fall Technology Meeting By: Joseph Breen Date: Background In-Pavement Light Fixture Assemblies Utilize a Circle of

More information

Structural Bolting. Notice the Grade 5 has a much smaller head configuration and a shorter shank then the grade A325 structural bolt.

Structural Bolting. Notice the Grade 5 has a much smaller head configuration and a shorter shank then the grade A325 structural bolt. Structural Bolting ASTM F3125/F3125M is a structural bolt specification covering inch and metric bolt grades. This specification contains 4 inch series bolting grades: A325, F1852, A490, and F2280. These

More information

HEADLINE BUILDING MATERIALS

HEADLINE BUILDING MATERIALS EADLINE BUILDING MATERIALS eb: www.hbm.ae l Email: commercial@hbm.ae eavy ex Structural Bolts ASTM A 325M Metric Series Dimensions P.O. Box 37366, Dubai, UAE l Tel: +971 4 3475675 l Fax: +971 4 347 5485

More information

FNW can handle all your hanger and fastener needs, all in one place. FNW products are sold exclusively at Ferguson.

FNW can handle all your hanger and fastener needs, all in one place. FNW products are sold exclusively at Ferguson. FASTENERS PIPE HANGERS, SUPPORTS & STRUT ACCESSORIES FNW can handle all your hanger and fastener needs, all in one place. FNW products are sold exclusively at Ferguson. Quick Reference Nuts Heavy Hex Nuts...4

More information

Designation: F

Designation: F Designation: F 852 05 Standard Specification for Twist Off Type Tension Control Structural Bolt/Nut/Washer Assemblies, Steel, Heat Treated, 20/05 ksi Minimum Tensile Strength This standard is issued under

More information

ODOT ITB Group 4 Item 33 Qty. 1

ODOT ITB Group 4 Item 33 Qty. 1 ODOT ITB 180-17 Group 4 Item 33 Qty. 1 ODOT ITB 180-17 Group 4 Item 34 Qty. 1 ODOT ITB 180-17 Group 4 Item 35 Qty. 1 ODOT ITB 180-17 Group 4 Item 36 Qty. 1 STRUCTURAL BOLTS NUCOR FASTENER TECHNICAL

More information

FASTENERS FIRST LOOSEN WITHOUT TURNING!

FASTENERS FIRST LOOSEN WITHOUT TURNING! FASTENERS FIRST LOOSEN WITHOUT TURNING! "Settling down" is the term ESNA laboratory people use to describe a relaxation phenomenon that occurs at room temperature under static conditions. During the first

More information

SPECIFICATION FOR HIGH STRENGTH STRUCTURAL BOLTS

SPECIFICATION FOR HIGH STRENGTH STRUCTURAL BOLTS UDC 621.882.211 [669.14.018.291] IS : 3757-1985 (Reaffirmed 2003) Edition 3.2 (1989-07) Indian Standard SPECIFICATION FOR HIGH STRENGTH STRUCTURAL BOLTS ( Second Revision ) (Incorporating Amendment Nos.

More information

ISO INTERNATIONAL STANDARD. Fasteners Torque/clamp force testing. Éléments de fixation Essais couple/tension. First edition

ISO INTERNATIONAL STANDARD. Fasteners Torque/clamp force testing. Éléments de fixation Essais couple/tension. First edition INTERNATIONAL STANDARD ISO 16047 First edition 2005-02-01 Fasteners Torque/clamp force testing Éléments de fixation Essais couple/tension Reference number ISO 16047:2005(E) ISO 2005 PDF disclaimer This

More information

Chemical composition. Type 2 as per F568: C ( ); P (max 0.048); S (max 0.058); Mn (min 0.74); B (min );

Chemical composition. Type 2 as per F568: C ( ); P (max 0.048); S (max 0.058); Mn (min 0.74); B (min ); BS EN 14399 HIGH STRENGTH STRUCTURAL BOLTING FOR PRE LOAD Direct comparison as an alternative to ASTM HSFG Bolts ASTM A325M Type 1, ASTM A490M Type 1 or 2 BS EN 14399-3:2005 Grade 8.8 and 10.9 Chemical

More information

TAPPING SCREWS 1-1 TAPPING SCREWS PHILLIPS OVAL. 1 General Fasteners HEAD ZINC BLACK SIZE SIZE CHROME CHROMATE OXIDE

TAPPING SCREWS 1-1 TAPPING SCREWS PHILLIPS OVAL. 1 General Fasteners HEAD ZINC BLACK SIZE SIZE CHROME CHROMATE OXIDE TAPPING SCREWS TAPPING SCREWS PHILLIPS OVAL HEAD ZINC BLACK SIZE SIZE CHROME CHROMATE OXIDE #4 x 3/8"... REG... 110001 #4 x 1/2"... REG... 105030... 110002 #4 x 5/8"... REG... 1 10003 #4 x 3/4"... REG...

More information

Hex Cap Screws Coarse & Fine Thread

Hex Cap Screws Coarse & Fine Thread INDUSTRIAL Product Description Hex head cap screws are manufactured to dimensional standards of ASME B18.2.1 and to various material and mechanical standards of ASTM and SAE. The length of a cap screw

More information

QUARTER-TURN FASTENERS (QCTH)

QUARTER-TURN FASTENERS (QCTH) Supplement - Page 1 QUARER-URN FASENERS (QC) Application Example Quarter-turn fastener used to attach cameras and sensors. Quarter urn Fasteners Quarter urn Receptacle Operation 1. Ensure that the knob

More information

Fastener Basics. Common Fastener Types. Fastener Materials. Grade / Class and Fastener Strength

Fastener Basics. Common Fastener Types. Fastener Materials. Grade / Class and Fastener Strength Fastener Basics Common Fastener Types Fastener Grade (US) or Class (metric) refers to the mechanical properties of the fastener material. Generally, a higher number indicates a stronger, more hardened

More information

Chapter 7. Fasteners

Chapter 7. Fasteners Chapter 7 Fasteners LEARNING OBJECTIVES After studying this chapter, students will be able to: Identify several types of fasteners. Explain why inch-based fasteners are not interchangeable with metric-based

More information

(Public Law ). Infasco Bolts are Original Equipment on both MACK and CATERPILLAR Products

(Public Law ). Infasco Bolts are Original Equipment on both MACK and CATERPILLAR Products INFASCO CAP SCREWS The Bolt of Choice for the Heavy Equipment Industry Infasco is the largest manufacturer of Grade 5 and Grade 8 Cap Screws in North America. They are accepted and used by all branches

More information

Limited Warranty And Exclusive Remedy

Limited Warranty And Exclusive Remedy Limited Warranty And Exclusive Remedy THE WORLD LEADER Deepak Fasteners Ltd., through its Unbrako Division and associated companies, warrants that these products conform to industry standards specified

More information

Pipe Restrainers series C Restrainers for use on IPEX Bionax AWWA CI OD C909 PVCO Pipe with MJ or Push-On Fittings

Pipe Restrainers series C Restrainers for use on IPEX Bionax AWWA CI OD C909 PVCO Pipe with MJ or Push-On Fittings Pipe Restrainers series 1000 1000C Restrainers for use on IPEX Bionax AWWA CI OD C909 PVCO Pipe with MJ or Push-On Fittings INFORMATION Restrainers for restraining mechanical joint or push-on fittings

More information

Procedure for Wrench Calibration and Snug Tightening

Procedure for Wrench Calibration and Snug Tightening Procedure for Wrench Calibration and Snug Tightening 1. Scope: This procedure provides the method for calibration of a manual torque wrench or an adjustable impact wrench and the snug tightening procedure

More information

OUR QUALITY POLICY VISION MISSION

OUR QUALITY POLICY VISION MISSION AUSTENITE FASTENERS PVT.LTD. A unique name in fasteners line has come long way since its taking over Krishna Engineering Company which was established in 1999. The company has it is manufacturing plant

More information

BOLTS AND NUTS Square Bolts( Table 1 ) Hex Nuts ( Table 7 ) Heavy Hex Nuts (Table 7) Heavy Hex Structural Bolts ( Table 2 )

BOLTS AND NUTS Square Bolts( Table 1 ) Hex Nuts ( Table 7 ) Heavy Hex Nuts (Table 7) Heavy Hex Structural Bolts ( Table 2 ) BOLTS AND NUTS 1493 An externally threaded fastener that must be assembled with a nut to perform its intended service is a bolt. (Example: heavy hex structural bolt.) An externally threaded fastener that

More information

Standard Specification for Carbon and Alloy Steel Nuts [Metric] 1

Standard Specification for Carbon and Alloy Steel Nuts [Metric] 1 Designation: A 563M 04 METRIC Standard Specification for Carbon and Alloy Steel Nuts [Metric] 1 This standard is issued under the fixed designation A 563M; the number immediately following the designation

More information

INSTALLATION INSTRUCTIONS CONTOURED LIGHT BAR APPLICATION: CHEVY EQUINOX/ GMC TERRAIN PART NUMBERS: ,

INSTALLATION INSTRUCTIONS CONTOURED LIGHT BAR APPLICATION: CHEVY EQUINOX/ GMC TERRAIN PART NUMBERS: , INSTALLATION INSTRUCTIONS CONTOURED LIGHT BAR APPLICATION: 2010-2014 CHEVY EQUINOX/ GMC TERRAIN PART NUMBERS: 32-21020, 32-21025 ITEM QUANTITY DESCRIPTION TOOLS NEEDED 1 1 CONTOUR BAR TORQUE WRENCH 2 1

More information

MATERIAL AND EQUIPMENT STANDARD FOR METRIC TYPE FASTENERS (SCREWS, BOLTS, STUDS, NUTS AND WASHERS) ORIGINAL EDITION DEC. 1997

MATERIAL AND EQUIPMENT STANDARD FOR METRIC TYPE FASTENERS (SCREWS, BOLTS, STUDS, NUTS AND WASHERS) ORIGINAL EDITION DEC. 1997 MATERIAL AND EQUIPMENT STANDARD FOR METRIC TYPE FASTENERS (SCREWS, BOLTS, STUDS, NUTS AND WASHERS) ORIGINAL EDITION DEC. 1997 This Standard is the property of Iranian Ministry of Petroleum. All rights

More information

MODEL T28173/T28174 ROLLER TABLES INSTRUCTIONS

MODEL T28173/T28174 ROLLER TABLES INSTRUCTIONS MODEL T28173/T28174 ROLLER TABLES INSTRUCTIONS FOR MODELS MFD. SINCE 10/17 For questions or help with this product contact Tech Support at (570) 546-9663 or techsupport@grizzly.com Rails Rollers Reversible

More information

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS R5 STEP BOARD APPLICATION: 2009-2017 Dodge Ram 1500 Quad / Crew Cab 2010-2017 Dodge Ram 2500/3500 Crew Cab PART NUMBER: 28-51040, 28-51045, 28-51050, 28-51055 ITEM QUANTITY DESCRIPTION

More information

Fasteners. Bolts. NAPA FastTrack Counter Sales Training Fasteners Page 1. Figure 1. Typical Measurements for a Bolt or Hex Head Cap Screw

Fasteners. Bolts. NAPA FastTrack Counter Sales Training Fasteners Page 1. Figure 1. Typical Measurements for a Bolt or Hex Head Cap Screw Fasteners Many types and sizes of fasteners are used in the automotive industry. Each fastener is designed for a specific purpose and condition. One of the most commonly used type of fastener is the threaded

More information

USER MANUAL Nord-Lock X-series washers

USER MANUAL Nord-Lock X-series washers USER MANUAL Nord-Lock X-series washers JOINT GUIDE 3 ASSEMBLY INSTRUCTIONS 4 TECHNICAL DATA 5 TORQUE GUIDE 5 THE EXCEPTIONAL SYSTEM THAT PREVENTS BOLT LOOSENING AND SLACKENING Nord-Lock X-series washers

More information

Installation Guide. Vibrator Motor Fixing Bolts. P3085 Issue A

Installation Guide. Vibrator Motor Fixing Bolts. P3085 Issue A Installation Guide Vibrator Motor Fixing Bolts P3085 Issue A Company Profile Invicta Vibrators is a division of Grantham Engineering Ltd., a company founded in 1946 specialising in electrical engineering.

More information

Page 1. SureMotion Quick-Start Guide: LARSACC_QS 1st Edition - Revision A 03/15/16. Standard Steel Bolt/Screw Torque Specifications

Page 1. SureMotion Quick-Start Guide: LARSACC_QS 1st Edition - Revision A 03/15/16. Standard Steel Bolt/Screw Torque Specifications R K C T I Repair Kit Product Compatibility Repair Kit # Linear Actuator Assembly # LARSACC-013 LARSACC-014 LARSD2-08T12BP2C (12-in travel) LARSD2-08T24BP2C (24-in travel) C P I R K 1 ea Ball Screw with

More information

Balaji THE COMPANY MISSION

Balaji THE COMPANY MISSION 82, GANGOTRI INDUSTRIAL ESTATE, OPP. PANCHRATNA ESTATE, NR. RAMOL OVER BRIDGE, VATVA-382445.(GUJARAT), INDIA. Website : www.balajifasteners.co.in E-mail : info@balajifasteners.co.in OUR QUALITY POLICY

More information

METRIC FA S T E N E R S

METRIC FA S T E N E R S METRIC FASTENERS CAP SCREWS & BOLTS DIN 603 Carriage Bolt, A2 SS DIN 603 Carriage Bolt, A4 SS DIN 931 Class 8.8 Hex Cap Screw, Steel Zinc DIN 931 Class 10.9 Hex Cap Screw, Plain Steel DIN 933 Class 8.8

More information

CIC 200 PLASTIC SCREW ANCHOR ASSORTMENT WITH PHILLIPS BINDING HEAD METAL SCREWS. 6 x 3/4 P/N x 1 METAL SCREW P/N x 3/4 METAL SCREW

CIC 200 PLASTIC SCREW ANCHOR ASSORTMENT WITH PHILLIPS BINDING HEAD METAL SCREWS. 6 x 3/4 P/N x 1 METAL SCREW P/N x 3/4 METAL SCREW A21-1 1160 CIC 200 PLASTIC SCREW ANCHOR ASSORTMENT WITH PHILLIPS BINDING HEAD S For light duty applications in solid materials Color coded diameters for easy identifi cation Acid resistant NYLON FLANGED:

More information

Page 1. SureMotion Quick-Start Guide: LACPACC_QS 1st Edition - Revision A 03/15/16

Page 1. SureMotion Quick-Start Guide: LACPACC_QS 1st Edition - Revision A 03/15/16 R K C T I Repair Kit Product Compatibility Repair Kit # Linear Actuator Assembly # LACPACC-002 LACPACC-003 LACP-16TxxLP5 (0.5-in lead screw pitch) LACP-16TxxL1 (1-in lead screw pitch) C P I R K 4 ea Flanged

More information

Special Thumb Screw Order Form

Special Thumb Screw Order Form Special Thumb Screw Order Form QUOTE FOR: ORDER FOR: Name: Company: Address: QUANTITY: Phone #: City: State: Zip: Email Address: FILL IN YOUR DIMENSIONS write directly over light blue type* write clearly

More information

ALLOY STEEL SOCKET SET SCREWS 1

ALLOY STEEL SOCKET SET SCREWS 1 1 IFI NOTE: - is reprinted with permission from the Annual Book of ASTM Standards, copyright American Society for Testing and Materials, 100 Barr Harbor Drive, West Conshohocken, PA 19428-2959, U.S.A,

More information

METRIC FASTENERS 1520 METRIC FASTENERS

METRIC FASTENERS 1520 METRIC FASTENERS 1520 METRIC FASTENERS METRIC FASTENERS A number of American National Standards covering metric bolts, screws, nuts, and washers have been established in cooperation with the Department of Defense in such

More information

NAVSEA STANDARD ITEM

NAVSEA STANDARD ITEM NAVSEA STANDARD ITEM FY-19 DATE: 01 OCT 2017 CATEGORY: I 1. SCOPE: 1.1 Title: Threaded Fastener Requirements; accomplish 2. REFERENCES: 2.1 Standard Items 2.2 S9086-CJ-STM-010/075, Fasteners 3. REQUIREMENTS:

More information

southpaw enterprises, inc.

southpaw enterprises, inc. southpaw enterprises, inc. Store these instructions with the enclosed maintenance checklist in a safe place. You may also access them on our website. Instruction Sheet Prefab Joist 3 Ft. Drop Ceiling Kit

More information

Mechanical joints. Major diameter Mean diameter Minor diameter Pitch p chamfer. Root Crest. Thread angle 2a. Dr. Salah Gasim Ahmed YIC 1

Mechanical joints. Major diameter Mean diameter Minor diameter Pitch p chamfer. Root Crest. Thread angle 2a. Dr. Salah Gasim Ahmed YIC 1 Screw fasteners Helical threads screws are an extremely important mechanical invention. It is the basis of power screws (which change angular motion to linear motion) and threaded fasteners such as bolts,

More information

RIVETS AND THREADED INSERTS

RIVETS AND THREADED INSERTS RIVETS AND THREADED INSERTS Tri-Clamp, Multi-Grip, Dome Head and Stainless Steel Rivets Multi-Grip Rivets Adapt to All Material Types and Thicknesses Threaded Inserts Install Threads Into Blind Areas and

More information

ONE-LOK Series SLC/SLCE Pipe Restraint for AWWA C909 PVC Pipe

ONE-LOK Series SLC/SLCE Pipe Restraint for AWWA C909 PVC Pipe ONE-LOK Series SLC/SLCE Restraint for AWWA Use the SIGMA ONE-LOK Series SLC/SLCE restraint for AWWA pipe at mechanical or push-on joint ductile iron fittings. The ONE-LOK Restraint Systems can successfully

More information

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS AUTOMOTIVE PRODUCTS, INSTALLATION INSTRUCTIONS ROCK SLIDERS APPLICATION: 2007-2017 Jeep Wrangler JK 2 Door PART NUMBER: 42-7005 ITEM QUANTITY DESCRIPTION TOOLS NEEDED 1,2 2 ROCK SLIDER ASSEMBLY, DRIVER

More information

c. Pins, bolts, and retaining rings b. Washers, locking nuts, and rivets

c. Pins, bolts, and retaining rings b. Washers, locking nuts, and rivets 62 20 HW 8: Fasteners / Force, Pressure, Density Mechanical Systems DUE Mon, 11/21/16 Start of class Check link on website for helpful fastener information Please use a scantron. Material is based primarily

More information

ISO INTERNATIONAL STANDARD. Hexalobular socket cheese head screws. Vis à métaux à tête cylindrique basse à six lobes internes

ISO INTERNATIONAL STANDARD. Hexalobular socket cheese head screws. Vis à métaux à tête cylindrique basse à six lobes internes INTERNATIONAL STANDARD ISO 14580 First edition 2001-09-01 Hexalobular socket cheese head screws Vis à métaux à tête cylindrique basse à six lobes internes Reference number ISO 14580:2001(E) ISO 2001 PDF

More information

Standard Specification for Carbons and Alloy Steel Nuts 1

Standard Specification for Carbons and Alloy Steel Nuts 1 Designation: A 563 07 Standard Specification for Carbons and Alloy Steel Nuts 1 This standard is issued under the fixed designation A 563; the number immediately following the designation indicates the

More information

Model 20: Home & Garden Cart

Model 20: Home & Garden Cart Model 20: Home & Garden Cart Parts List Step 1: A: Install two ¾ Bolts (C) through the rear trim piece on the Bottom Panel (S) and attach to Lock Nuts. (Lock nuts on bottom side) B: Place left Side Panel

More information

POWER-Skru Large Diameter Concrete Screw

POWER-Skru Large Diameter Concrete Screw POWER-Skru Large Diameter Concrete Screw Description The POWER-Skru Large Diameter Concrete Screw is a highstrength screw anchor with self-tapping threads that offer a unique undercutting design for anchoring

More information

Installation Guide Installation Kit for Mounting Philips MP20/30/40/50/60/70 on GE Healthcare Aisys Carestation

Installation Guide Installation Kit for Mounting Philips MP20/30/40/50/60/70 on GE Healthcare Aisys Carestation Installation Guide Installation Kit for Mounting Philips MP20/30/40/50/60/70 on GE Healthcare Aisys Carestation The purpose of this guide is to: 1. Describe mounting of Top Plate/Camlock Rail Assembly

More information

ERECTION & CONSTRUCTION

ERECTION & CONSTRUCTION ERECTION & CONSTRUCTION High Strength Structural Bolting Author: Clark Hyland Affiliation: Steel Construction New Zealand Inc. Date: 24 th August 2007 Ref.: Key Words High Strength Bolts; Property Class

More information

ISO INTERNATIONAL STANDARD. Hexagon bolts with flange with metric fine pitch thread Small series Product grade A

ISO INTERNATIONAL STANDARD. Hexagon bolts with flange with metric fine pitch thread Small series Product grade A INTERNATIONAL STANDARD ISO 15072 First edition 1999-12-15 Hexagon bolts with flange with metric fine pitch thread Small series Product grade A Vis à tête hexagonale à embase cylindro-tronconique, à filetage

More information

LENGTH IDENTIFICATION

LENGTH IDENTIFICATION 58 Power-Bolt HEAVY DUTY, ELF-UNDERCUTTING LEEVE TYPE BAE MATERIAL Concrete, Block, Brick, tone IZE RANGE 1/4" x 1" to 1-1/4" x 9 MATERIAL LENGTH IDENTIFICATION The Power-Bolt anchor has a length identification

More information

HD installation guide

HD installation guide JANUS INTERNATIONAL 1 866 562 2580 www.janusintl.c o m 1950 1950HD installation guide RIGHT DRIVE END SHOWN LH OPPOSITE LEFT TENSION END SHOWN RH OPPOSITE PUSH-UP OPERATION 1950 1950HD SHOWN A rolling

More information

INSTALLATION GUIDE SM SOLAR MOUNT PUB15JAN01

INSTALLATION GUIDE SM SOLAR MOUNT PUB15JAN01 MOUNT INSTALLATION GUIDE PUB5JAN0 SM SOLAR Wrenches and Torque Wrench Size Recommended Torque (ft-lbs) /4 Hardware 7/6 *0 3/8 Hardware 9/6 *30 # Hardware 5/6 0 Torques are not designed for use with wood

More information

REC Series Rack Installation Guide

REC Series Rack Installation Guide REC Series Rack Installation Guide 1 REC Series Rack Installation Guide TABLE OF CONTENTS SECTION SAFETY WARNINGS 1 600 WIDE EXPLODED VIEW 2 800 WIDE EXPLODED VIEW 3 SWITCHING DOOR HANDING 4 STABILIZING

More information

HARDLOCK NUT RIM & HARDLOCK NUT BASIC

HARDLOCK NUT RIM & HARDLOCK NUT BASIC 1 Clamp Load [kn] FEATURES OF HARDLOCK NUT Reusable without reduction in performance! Full torque management and completely fastened even with ZERO (0) clamp load! Available in various materials and surface

More information

southpaw enterprises, inc.

southpaw enterprises, inc. Eye Bolt Wrap 7001 Store these instructions with the enclosed maintenance checklist in a safe place. You may also access them on our website. this in an accessible location: the must be read and familiar

More information

INSTALLATION INSTRUCTION RRU DOUBLE LIGHT POLE MOUNT

INSTALLATION INSTRUCTION RRU DOUBLE LIGHT POLE MOUNT INSTALLATION INSTRUCTION RRU Double Light Pole Mount for installation of two RRU units on mast, towers or other vertical structures. CUE DEE YOUR INNOVATIVE PARTNER 1 CONTENTS 1. PRODUCT COVERED IN THIS

More information

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS AUTOMOTIVE PRODUCTS, INSTALLATION INSTRUCTIONS PLATINUM 4 OVAL STEP BAR (90 BENT END) APPLICATION: 2010-2015 Dodge Ram 2500/3500 Mega Cab PART NUMBER: 21-3570, 21-3575, 23-3570, 23-3575, 25-3570, 25-3575,

More information

TOOLING COMPONENTS. Clamping Kits Step Blocks & Kits Driver Studs Bolts, Screws Nuts, Washers...

TOOLING COMPONENTS. Clamping Kits Step Blocks & Kits Driver Studs Bolts, Screws Nuts, Washers... TOOLING COMPONENTS Clamping Kits... 2-5 Step Blocks & Kits... 6-7 Driver Studs... 8-12 Bolts, Screws... 13-19 Nuts, Washers... 20-29 Clamps... 30-43 Swivel Screw Clamps... 44-46 Screws... 47-48 Hand Knobs...49

More information

Standard Specification for High-Strength Bolts for Structural Steel Joints [Metric] 1

Standard Specification for High-Strength Bolts for Structural Steel Joints [Metric] 1 Designation: A 325M 00 METRIC An American National Standard Standard Specification for High-Strength Bolts for Structural Steel Joints [Metric] 1 This standard is issued under the fixed designation A 325M;

More information

Table of Content. Machine Features and Functions. Specifications. Configuration and Working Principle 5. Machine Operation. Machine Adjustments

Table of Content. Machine Features and Functions. Specifications. Configuration and Working Principle 5. Machine Operation. Machine Adjustments Table of Content Safety Instructions Machine Features and Functions Specifications 2 3 4 Configuration and Working Principle 5 Machine Operation 7 Machine Adjustments 8 Machine Installation 9 Machine Remove

More information

TABLE OF CONTENTS REQUIRED TOOLS

TABLE OF CONTENTS REQUIRED TOOLS TABLE OF CONTENTS SECTION SECTION TITLE PAGE NO. 1 2 3 4 5 Assembling Mounting Structure Installing Bicycle Supports Mounting Rack to Wall Adding Sections Customizing Rack Configuration REQUIRED TOOLS

More information

Item #28187 EASTWOOD BEAD ROLLER INSTRUCTIONS

Item #28187 EASTWOOD BEAD ROLLER INSTRUCTIONS Item #28187 EASTWOOD BEAD ROLLER INSTRUCTIONS The Eastwood Bead Roller is a professional metal fabrication tool for producing strengthening ribs in panels used in creating replacement fl oor pans, fi rewalls,

More information

This manual will aid in the assembly of the FireBall V90 and FireBall X90. The assembly of both machines will be identical, unless specified.

This manual will aid in the assembly of the FireBall V90 and FireBall X90. The assembly of both machines will be identical, unless specified. This manual will aid in the assembly of the FireBall V90 and FireBall X90. The assembly of both machines will be identical, unless specified. Step #1 Lay all parts out to verify quantities. (2) 2 x 25-1/4

More information

STEP 1 STEP 2 LEVELER KIT OPTION MOBILE CASTER KIT OPTION

STEP 1 STEP 2 LEVELER KIT OPTION MOBILE CASTER KIT OPTION B SERIES INDUSTRIAL BENCHES TOOLS REQUIRED FOR ASSEMBLY Socket set, Open end wrench set, Cordless drill with 3/8" socket bit (Magnetic recommended). BEFORE ASSEMBLY Read through the assembly instructions

More information

C4 Fabrication Rock Slider Installation 14+ 5th Gen 4Runner w/o KDSS

C4 Fabrication Rock Slider Installation 14+ 5th Gen 4Runner w/o KDSS C4 Fabrication Rock Slider Installation 14+ 5th Gen 4Runner w/o KDSS Thank you for your purchase of the C4 Fabrication s 5th Gen 4Runner Rock Sliders! This product was carefully crafted to ensure a perfect

More information

USER MANUAL MODEL MZ-100 BOLT TENSION CALIBRATOR

USER MANUAL MODEL MZ-100 BOLT TENSION CALIBRATOR USER MANUAL MODEL MZ-100 BOLT TENSION CALIBRATOR 442 SOUTH GREEN ROAD SOUTH EUCLID, OHIO 44121 USA VOICE: 216-481-4774 FAX: 216-481-2427 www.skidmore-wilhelm.com TABLE OF CONTENTS Introduction... 2 Typical

More information

MODEL 36 Di-Acro Hand Shear

MODEL 36 Di-Acro Hand Shear OPERATOR S MANUAL & INSTRUCTIONS MODEL 36 Di-Acro Hand Shear Di-Acro, Incorporated PO Box 9700 Canton, Ohio 44711 3713 Progress Street N.E. Canton, Ohio 44705 330-455-1942 330-455-0220 (fax) Revised 01/02

More information

DETAIL SPECIFICATION SHEET FITTING, INSTALLATION, FLARED TUBE AND HOSE, SWIVEL

DETAIL SPECIFICATION SHEET FITTING, INSTALLATION, FLARED TUBE AND HOSE, SWIVEL INCH-POUND MS33786B 12 February 2013 SUPERSEDING MS33786A 1 February 1985 DETAIL SPECIFICATION SHEET FITTING, INSTALLATION, FLARED TUBE AND HOSE, SWIVEL This specification is approved for use by all Departments

More information

Fastener Basics. Common Fastener Types. Fastener Materials. Grade / Class and Fastener Strength

Fastener Basics. Common Fastener Types. Fastener Materials. Grade / Class and Fastener Strength Fastener Basics Common Fastener Types Fastener Grade (US) or Class (metric) refers to the mechanical properties of the fastener material. Generally, a higher number indicates a stronger, more hardened

More information

Contents. Grade 2, 5, 8 Hex Bolts 4. Heavy Hex Head Structural Bolts 6. A325 and A490 Tension Control Bolts (TC) 13. Nuts 22.

Contents. Grade 2, 5, 8 Hex Bolts 4. Heavy Hex Head Structural Bolts 6. A325 and A490 Tension Control Bolts (TC) 13. Nuts 22. Who we are Amcan Jumax is the result of a merging between Boulons Jumax and Amcan Threaded Products, two successful companies well established, both with excellent reputations. The new entity is a bigger

More information

Installation Guide Tilt/Swivel Flush Mount for 23'' and Larger Flat Panel Displays

Installation Guide Tilt/Swivel Flush Mount for 23'' and Larger Flat Panel Displays Installation Guide Tilt/Swivel Flush Mount for 23'' and Larger Flat Panel isplays WRNING: This mounting system has a weight limit of 100 lbs [45.36 kg]. o not mount a display weighing more than 100 lbs

More information

What is a fastener? A device to locate or hold parts

What is a fastener? A device to locate or hold parts What is a fastener? A device to locate or hold parts As a repair technician you will become skilled at removing, reconditioning, replacing, and installing fasteners. An important skill to learn is how

More information

METRIC BOlTS. Size Grade Torque 8mm ft/lbs. 10mm ft/lbs. 12mm ft/lbs. 14mm ft/lbs. 16mm ft/lbs.

METRIC BOlTS. Size Grade Torque 8mm ft/lbs. 10mm ft/lbs. 12mm ft/lbs. 14mm ft/lbs. 16mm ft/lbs. 8/16 HJ31005,Rev 7 BOlT TORQUE SPECIfICATIONS METRIC BOlTS STANDARD BOlTS Size Grade Torque 5/16 5 18 ft/lbs. 3/8 5 30 ft/lbs. 7/16 5 50 ft/lbs. 1/2 5 75 ft/lbs. 5/8 5 150 ft/lbs. 3/4 5 290 ft/lbs. Size

More information

FRAME BRACKET. Doing Our Best to Provide You the Best. Ford F250, F350 & F parts list. Page 1. 2/17 HJ32002,Rev 2.

FRAME BRACKET. Doing Our Best to Provide You the Best. Ford F250, F350 & F parts list. Page 1. 2/17 HJ32002,Rev 2. 2/17 HJ32002,Rev 2 BOlt torque specifications MEtRiC BOlts size Grade torque 8mm 8.8 23 ft/lbs. 10mm 8.8 45 ft/lbs. 12mm 8.8 78 ft/lbs. 14mm 8.8 125 ft/lbs. standard BOlts size Grade torque 5/16 5 18 ft/lbs.

More information

7x --Tailstock Cam Lock

7x --Tailstock Cam Lock 7x --Tailstock Cam Lock By Magic Brian magicbrian40@yahoo.com Probably the most pleasing mod to have, but often not done through lack of milling facility s This version does NOT require a mill. MATERIALS

More information

AUDAS. Tel: Fax: No.259 Baichi north Rd.Haiyan.Zhejiang.

AUDAS. Tel: Fax: No.259 Baichi north Rd.Haiyan.Zhejiang. Standard State SECTION A : SCREW THREAD Basic elements of screw thread design ANSI/ASME B1.7M Nomenclature.Definitions and letter symbols for screw thread ASME B1.1 Unified inch screw thread ( UN and UNF

More information

1.2M Ku-BAND Rx/Tx SERIES 1132 ANTENNA SYSTEM

1.2M Ku-BAND Rx/Tx SERIES 1132 ANTENNA SYSTEM August12, 2003 ASSEMBLY MANUAL Revision E 1.2M Ku-BAND Rx/Tx SERIES 1132 ANTENNA SYSTEM PRODELIN CORPORATION 1500 Prodelin Drive Newton NC 28658 1.2M Ku-BAND Rx/Tx SERIES 1132 ANTENNA SYSTEM E Revised

More information

NTTC Tank Truck Week Awareness Gaskets/Fasteners/Flanges

NTTC Tank Truck Week Awareness Gaskets/Fasteners/Flanges NTTC Tank Truck Week 2015 Awareness Gaskets/Fasteners/Flanges OVERVIEW 1. Flange 101 Flange Types Inspection & Assembly 2. Gaskets 101 Stress Tightness 3. Fastener 101 Yield Lubrication Bolted Flanged

More information

installation guide

installation guide JANUS INTERNATIONAL 1 866 562 2580 w w w. j a n u s i n t l. c o m 2000 2500 3000 installation guide RIGHT DRIVE END SHOWN LH OPPOSITE LEFT TENSION END SHOWN RH OPPOSITE PUSH-UP OPERATION 2000 2500 3000

More information

MECHANICAL ASSEMBLY John Wiley & Sons, Inc. M. P. Groover, Fundamentals of Modern Manufacturing 2/e

MECHANICAL ASSEMBLY John Wiley & Sons, Inc. M. P. Groover, Fundamentals of Modern Manufacturing 2/e MECHANICAL ASSEMBLY Threaded Fasteners Rivets and Eyelets Assembly Methods Based on Interference Fits Other Mechanical Fastening Methods Molding Inserts and Integral Fasteners Design for Assembly Mechanical

More information

INSTALLATION INSTRUCTIONS, AND PARTS LIST

INSTALLATION INSTRUCTIONS, AND PARTS LIST INSTALLATION INSTRUCTIONS, AND PARTS LIST LB20 SERIES RAMPS Link Mfg. Ltd. 223 15th St. N.E. Sioux Center, IA USA 51250-2120 (712) 722-4868 Fax (712) 722-4779 QUESTIONS? CALL CUSTOMER SERVICE 1-800-248-3057

More information

Adjusting 45 Compass Hardware Including 4-Point

Adjusting 45 Compass Hardware Including 4-Point Adjusting 45 Compass Hardware Including 4-Point Compass Hardware - US Patent No. 7,104,610 & 7,891,739 Apparatus for Mounting a Wheelchair Back Quick Release Fixed 4-Point The information in this manual

More information

Fastener Solutions. USA: 866.LAWSON4U ( ) Canada: lawsonproducts.com

Fastener Solutions. USA: 866.LAWSON4U ( ) Canada: lawsonproducts.com USA: 866.LAWSON4U (866.529.7664) Canada: 800.563.1717 lawsonproducts.com Fastener Solutions 2017 Lawson Products, Inc. All rights reserved. Printed in USA. E686V3 (1/17) LAWSON'S FASTENER SOLUTIONS Tru-Torq

More information

FRAME BRACKET. Doing Our Best to Provide You the Best. Ford. Page 1. BOlT TORQUE SPECIFICATIONS HJ31000,Rev 0

FRAME BRACKET. Doing Our Best to Provide You the Best. Ford. Page 1. BOlT TORQUE SPECIFICATIONS HJ31000,Rev 0 2-13 HJ31000,Rev 0 Ford BOlT TORQUE SPECIFICATIONS METRIC BOlTS Size Grade Torque 8mm 8.8 23 ft/lbs. 10mm 8.8 45 ft/lbs. 12mm 8.8 78 ft/lbs. 14mm 8.8 125 ft/lbs. STANDARD BOlTS Size Grade Torque 5/16 5

More information

CRITICAL INFORMATION:

CRITICAL INFORMATION: IMPORTANT ALERT: GM uses a very strong thread-locking compound on all body bolts. Use of an air assisted impact ratchet can cause damage to the threads on factory body mount bolts and the internal nut

More information

Leveling Feet, Base Plates and Casters

Leveling Feet, Base Plates and Casters Leveling Feet, Base Plates and Casters 77 Leveling Foot 1 1 Fastening to profile end Fastening in T-slot of profile For leveling tables and light equipment. Ratchet-type height adjustment requires no tools.

More information

MITCHELL WREATH RINGS NO-HAMMER ASSEMBLY INSTRUCTIONS

MITCHELL WREATH RINGS NO-HAMMER ASSEMBLY INSTRUCTIONS MITCHELL WREATH RINGS NO-HAMMER ASSEMBLY INSTRUCTIONS METAL STAND WITH WOOD STAND WITH PAGE 2 OF 10 MASTER PARTS LIST HEAD ASSEMBLY LINKAGE ASSEMBLY HOOK LEVER ASSEMBLY FOOT PEDAL ASSEMBLY ALL FASTENERS

More information

Ref# Description Qty(pc) 14 Phillips Head Screw,M6*10, Black Flanged Lock Nut,M6,Black 48

Ref# Description Qty(pc) 14 Phillips Head Screw,M6*10, Black Flanged Lock Nut,M6,Black 48 Operator s Instructions GARAGE STORAGE SOLUTIONS WALL CABINET Model: GWC3DP SKU: 211-4359 Safety Instructions and Cautions Use appropriate safety equipment when using power and hand tools. Failure to do

More information

ISO Prevailing torque type hexagon nuts (with non-metallic insert), style 2 Property classes 9 and 12

ISO Prevailing torque type hexagon nuts (with non-metallic insert), style 2 Property classes 9 and 12 INTERNATIONAL STANDARD ISO 7041 Fourth edition 2012-05-15 Prevailing torque type hexagon nuts (with non-metallic insert), style 2 Property classes 9 and 12 Écrous hexagonaux autofreinés (à anneau non métallique),

More information

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS E-SERIES STEP BARS / 4 OVAL STEP BARS APPLICATION: 2011-2017 Jeep Grand Cherokee PART NUMBER: 23-3610, 23-3615, 21-3610, 21-3615, 23-73610 ITEM QUANTITY DESCRIPTION TOOLS NEEDED

More information

Agri-Fab OWNERS MANUAL MODEL NO CU. FT. FARM/YARD CART. CAUTION: Read Rules for Safe Operation and Instructions Carefully

Agri-Fab OWNERS MANUAL MODEL NO CU. FT. FARM/YARD CART. CAUTION: Read Rules for Safe Operation and Instructions Carefully Agri-Fab OWNERS MANUAL MODEL NO. 45-01772 CAUTION: Read Rules for Safe Operation and Instructions Carefully 14 CU. FT. FARM/YARD CART Safety Assembly Operation Maintenance Parts the fastest way to purchase

More information

HANDLING AND ASSEMBLY INSTRUCTIONS FOR TRUE FOCUS 3.0M, 3.8M AND 4.2M ANTENNAS WITH POLAR MOUNT

HANDLING AND ASSEMBLY INSTRUCTIONS FOR TRUE FOCUS 3.0M, 3.8M AND 4.2M ANTENNAS WITH POLAR MOUNT HANDLING AND ASSEMBLY INSTRUCTIONS FOR TRUE FOCUS 3.0M, 3.8M AND 4.2M ANTENNAS WITH POLAR MOUNT Introduction SECTION 1 Thank you for purchasing one of our fine True Focus products. This manual covers the

More information

The DeltaGrip System. Safety and Operating Instructions. Trigger. Air Supply Connection. Handle Assembly. Air Line Assembly.

The DeltaGrip System. Safety and Operating Instructions. Trigger. Air Supply Connection. Handle Assembly. Air Line Assembly. The DeltaGrip System Safety and Operating Instructions Trigger Air Supply Connection Handle Assembly Air Line Assembly Punch Die Pneumatic Diaphragm Assembly Shackle, Pin & Jam Nut Jaw Frame Shoulder Screw

More information