A Full Line of Pipe Products for Any Application

Size: px
Start display at page:

Download "A Full Line of Pipe Products for Any Application"

Transcription

1 Standard Pipe

2 SureThread and ERW: Setting the standard in the standard pipe industry With a tradition of service and quality that s 80-plus years strong, Wheatland Tube is the only domestic, full-line producer of continuous weld (CW) and electric resistance weld (ERW) ¼ to 12 pipe today. Wheatland is also a worldwide leader in hot-dip galvanization technology. ¼ to 12 nominal sizes produced ⅛ to 12 sizes stocked in a variety of ASTM standards Standard hot-dip galvanization to ASTM A53 requirements 350 combinations of finish, end treatments and lengths A Full Line of Pipe Products for Any Application Wheatland produces pipe of ¼ to 12 nominal sizes and stocks ⅛ to 12 pipe sizes in a variety of ASTM standards. SureThread (ASTM A53) and ERW are used for mechanical and pressure applications, and for ordinary uses in steam, water, gas and air lines. More than 350 different combinations of finish, end treatments and lengths are available on standard pipe. Our standard process is hot-dip galvanization to the ASTM A53 requirements. Surface finishes include black, passivate, galvanized, uncoated, pickled, pickled and oiled, bare and soluble oil. End finishes include plain-end, roll groove, cut groove, threaded and coupled, and threads only (one or both ends). Documented Quality Assurance Wheatland facilities have quality systems in place and are registered to ISO 9001:2008 Quality Management Systems at minimum. Strategically located in the U.S., we carry a large inventory and can ship quickly to meet your tight delivery schedules. For more information, call or visit wheatland.com

3 A53 Electric Resistance Weld Pipe, Type E, Grade B Suitable for welding, threading and grooving Finish options: Black and hot-dip galvanized Sizes: Schedule 40, 2 12 Produced to ASTM A53 / 53M, federal specification WW-P404 and ASME B36.10M ASTM A53 TYPE E WEIGHTS AND DIMENSIONS TRADE SIZE OD NOMINAL WALL THICKNESS WEIGHT in. in. lbs. / ft / HYDROSTATIC AND NON-DESTRUCTIVE ELECTRIC TESTING Hydrostatic inspection test pressures for plain-end pipe are listed in Table X 2.2 of the A53 / A53M industry specification. Test pressures are maintained for a minimum of five seconds. Non-destructive electric testing of the weld seam is required on each length of ERW pipe NPS 2 and larger. TENSILE REQUIREMENTS TENSILE STRENGTH, MIN. YIELD STRENGTH, MIN. 60,000 psi 35,000 psi BENDING TEST (COLD) DEGREE OF BEND DIAMETER OF MANDREL 90 12x pipe OD

4 The continuous weld process creates a uniform grain structure to make bending, cutting and threading easier Ideal for applications with frequent threading, grooving and bending requirements Finish options: Black, passivate, bare, pickled and oiled, and hot-dip galvanized Sizes: ¼ to 4 Standard and extra heavy Produced to ASTM A53A 53M, federal specification WW-P404 and ASME B36.10M ASTM A53 TYPE F WEIGHTS AND DIMENSIONS TRADE SIZE OD SCHEDULE 40 SCHEDULE 80 in. WalI Inches Weight lbs. / ft. Wall Inches Weight lbs. / ft. 1/ / / / / / / / TENSILE REQUIREMENTS TENSILE STRENGTH, MIN. YIELD STRENGTH, MIN. ELONGATION IN 2 48,000 psi 30,000 psi Refer to A53 table x 4.1, latest revisions ASTM A53 / A53M TEST PRESSURES (GRADE A) NOMINAL SIZE 1/4 1/2 3/4 TEST PRESSURE (psi) 700 psi 700 psi 700 psi BENDING TEST (Less than NPS 2) DEGREE OF BEND DIAMETER OF MANDREL Standard 90 12x pipe OD Close Coiling 90 8x pipe OD psi 1 1/ psi 1 1/ psi psi 2 1/ psi FLATTENING TEST NPS 2 AND GREATER To test the quality of the weld, we position the weld at 90 from the direction of force and flatten until the OD is ¾ of the original outside diameter. No cracks should occur along the inside or outside surface of the weld psi 3 1/ psi psi

5 STANDARD PIPE SCHEDULE 40 ASTM A53 GRADES A AND B TRADE SIZE DN DESIGNATOR OD ID WALL THICKNESS in. mm in. mm in. mm (lbs. / ft.) NOMINAL WEIGHT (MASS) PER UNIT LENGTH (kg / m) Couplings (lbs. / ft.) Couplings (kg / m) 1/ / / / / / / / / EXTRA-HEAVY PIPE SCHEDULE 80 ASTM A53 TYPE F, GRADE A TRADE SIZE DN DESIGNATOR OD ID WALL THICKNESS in. mm in. mm in. mm (lbs. / ft.) NOMINAL WEIGHT (MASS) PER UNIT LENGTH (kg / m) Couplings (lbs. / ft.) Couplings (kg / m) 1/ / / / / / / / / PERMISSIBLE VARIATIONS ASTM A53 GRADES A AND B PIPE Outside Diameter Mechanical Properties Grade A: Yield 30,000 [205 MPa] psi minimum; Tensile 48,000 psi [330 MPa] minimum Grade B: Yield 35,000 [240 MPa] psi minimum; Tensile 60,000 psi [415 MPa] minimum OD OVER UNDER NPS ⅛ to 1 1/2; DN 6 to 40 1/64 (0.4mm) 1/64 (0.4mm) NPS 2 and up; DN 50 and up 1% 1% Wall Thickness at Any Point 12.5% Weight 10% 10%

6 700 South Dock Street Sharon, PA wheatland.com Corporate Office 227 West Monroe Street 26th Floor Chicago, IL jmcsteelgroup.com About Wheatland Tube Standard Pipe Wheatland Tube produces a full line of standard pipe SureThread and ERW pipe, lance pipe and seamless pressure pipe. We re the industry leader in hot-dip galvanized pipe, and we offer more than 350 different combinations of finish, end treatments and length on our standard pipe. All Wheatland manufacturing locations quality management systems are certified to ISO 9001:2008 requirements. For more information, contact Wheatland Tube at: or info@wheatland.com Or, visit our website at wheatland.com The Strength to Deliver SP

A Full Line of Pipe Products for Any Application

A Full Line of Pipe Products for Any Application Standard Pipe Standard Pipe: SureThread and ERW Setting the standard in the standard pipe industry With a tradition of service and quality that s 80-plus years strong, Wheatland Tube is the only domestic,

More information

PIPING NOMENCLATURE. Header Branch connection Valve Flange Expansion joint Expansion loop Pipe support Reducer Elbow

PIPING NOMENCLATURE. Header Branch connection Valve Flange Expansion joint Expansion loop Pipe support Reducer Elbow PIPING COMPONENTS Piping components are mechanical elements suitable for joining or assembly into pressure-tight fluid containing piping systems. Components include pipe, tubing, fittings, flanges, gaskets,

More information

Steel Nipples. Nipples & Fittings. Black and Galvanized Steel Nipples. Black and Galvanized. Steel Nipples. 142

Steel Nipples. Nipples & Fittings. Black and Galvanized Steel Nipples. Black and Galvanized. Steel Nipples. 142 PRODUCT SPECIFICATIONS Welded steel pipe nipples both galvanized an dblack in diameters ranging from 1/8 up to 4 in lengths from close to 12 and cut-pipe up to 120. TECHNICAL SPECIFICATIONS Standards:

More information

Mission Statement. State Steel strives to provide quality products and services at competitive

Mission Statement. State Steel strives to provide quality products and services at competitive Mission Statement State Steel strives to provide quality products and services at competitive prices. This commitment is demonstrated with several branch locations all offering large, diverse inventories

More information

This specification describes the minimum requirements for service water piping systems (ie: cooling water, process water, etc.), located on surface.

This specification describes the minimum requirements for service water piping systems (ie: cooling water, process water, etc.), located on surface. SPEC-3500 1/9 1.0 PURPOSE This specification describes the minimum requirements for service water piping systems (ie: cooling water, process water, etc.), located on surface. Note: This specification does

More information

ODOT ITB Group 4 Item 33 Qty. 1

ODOT ITB Group 4 Item 33 Qty. 1 ODOT ITB 180-17 Group 4 Item 33 Qty. 1 ODOT ITB 180-17 Group 4 Item 34 Qty. 1 ODOT ITB 180-17 Group 4 Item 35 Qty. 1 ODOT ITB 180-17 Group 4 Item 36 Qty. 1 STRUCTURAL BOLTS NUCOR FASTENER TECHNICAL

More information

Activating Your Ideas. In Stainless Steel Pipe

Activating Your Ideas. In Stainless Steel Pipe Activating Your Ideas In Stainless Steel Pipe Applications Outokumpu produces austenitic and duplex pipe products from small diameter pipe to large diameter, heavy wall pipe, with thicknesses up to 2 on

More information

Page 1 of 12 Second Revision No. 5-NFPA 12-2014 [ Section No. 2.3.4 ] 2.3.4 ASTM Publications. ASTM International, 100 Barr Harbor Drive, P.O. Box C 700, West Conshohocken, PA 19428-2959. ASTM A53, Standard

More information

Technical Specifications: Supply of Seamless Grade TP304L Pipe and Grade WP304L Pipework Fittings to the ITER Organization (IO).

Technical Specifications: Supply of Seamless Grade TP304L Pipe and Grade WP304L Pipework Fittings to the ITER Organization (IO). IDM UID: R22L3M ver 1.4 Technical Specifications: Supply of Seamless Grade TP304L Pipe and Grade WP304L Pipework Fittings to the ITER Organization (IO). Contents 1 Terms and Acronyms... 3 2 Background...

More information

Kerkau Manufacturing. B16.5 Flange Book

Kerkau Manufacturing. B16.5 Flange Book Kerkau Manufacturing B16.5 Flange Book TABLE OF CONTENTS Revision 1 Title Page Table of Contents Tolerance Page Permissible Imperfections Dimensions of Flange Facings (all pressure rating classes) Dimensions

More information

.1 Materials and installation for steel piping, valves and fittings for hydronic systems in building services piping..2 Related Sections.

.1 Materials and installation for steel piping, valves and fittings for hydronic systems in building services piping..2 Related Sections. Issued 2006/08/01 Section 15183 Hydronic Systems: Steel Page 1 of 6 PART 1 GENERAL 1.1 SUMMARY.1 Section Includes..1 Materials and installation for steel piping, valves and fittings for hydronic systems

More information

Government Recognized Export House OHSAS 18001:2007 ISO 14001:2004 PED Approved Company.

Government Recognized Export House OHSAS 18001:2007 ISO 14001:2004 PED Approved Company. Government Recognized Export House OHSAS 800:200 ISO 400:2004 PED Approved Company. Phone : +9 22 44 (2 Lines) Fax : +9 22 289 4 Email : export@reliablepipes.com domestic@reliablepipes.com Designation:

More information

SUBMITTAL INFORMATION "BOLTS, NUTS AND FLAT WASHERS" "ABSTRACT OF ASTM A307 GRADE A AND B" CARBON STEEL BOLTS AND STUDS, 60,000 PSI TENSILE STRENGTH

SUBMITTAL INFORMATION BOLTS, NUTS AND FLAT WASHERS ABSTRACT OF ASTM A307 GRADE A AND B CARBON STEEL BOLTS AND STUDS, 60,000 PSI TENSILE STRENGTH "BOLTS, NUTS AND FLAT WASHERS" "ABSTRACT OF ASTM A307 GRADE A AND B" CARBON STEEL BOLTS AND STUDS, 60,000 PSI TENSILE STRENGTH GRADE: LOW CARBON STEEL GRADE A GRADE B PHOSPHOROUS MAX % 0.06 0.04 SULFUR,

More information

SSAB Laser OPTIMIZED FOR YOU AND LASER CUTTING

SSAB Laser OPTIMIZED FOR YOU AND LASER CUTTING SSAB Laser OPTIMIZED FOR YOU AND LASER CUTTING If other steel doesn t behave to perfection, try SSAB Laser. It has guaranteed flatness both before and after cutting. SSAB LASER THE ULTIMATE CHOICE FOR

More information

Hex Cap Screws Coarse & Fine Thread

Hex Cap Screws Coarse & Fine Thread INDUSTRIAL Product Description Hex head cap screws are manufactured to dimensional standards of ASME B18.2.1 and to various material and mechanical standards of ASTM and SAE. The length of a cap screw

More information

Call Today for a Free Quote! Immediate Availability. Inexpensive Delivery.

Call Today for a Free Quote! Immediate Availability. Inexpensive Delivery. Call Today for a Free Quote! Immediate Availability. Inexpensive Delivery. ASTM A606-4 / A588 / A847 (AKA CORTEN ) STRUCTURAL COMPONENTS FLAT SHEETS, FLAT BAR, PLATE, COIL, RECTANGULAR TUBE, SQUARE TUBE,

More information

Standard Specification for Quenched and Tempered Steel Bolts and Studs 1

Standard Specification for Quenched and Tempered Steel Bolts and Studs 1 Designation: A 44 00 Standard Specification for Quenched and Tempered Steel Bolts and Studs This standard is issued under the fixed designation A 44; the number immediately following the designation indicates

More information

GOST TUBING AND COUPLINGS

GOST TUBING AND COUPLINGS GOST 633-80 TUBING AND COUPLINGS Tubing is used for oil and gas production. Tubing shall be made seamless, plain- or upset end and couplings with high-seal connections. Coupling-free connections are possible.

More information

QUALITY ASSURANCE SPECIFICATION

QUALITY ASSURANCE SPECIFICATION Page 1 of 8 QAS: 2.02 QUALITY ASSURANCE SPECIFICATION REVISION: 0 DATE: 08/29/14 MATERIAL PURCHASING Code Material Purchase Specification for Pipe, Valves, Fitting, and Flanges PAGE 1 OF 8 1.0 Purpose

More information

Allentown, PA - Plant Expansion Steel Pipe Spec. No. 671-S40 December 31, 2015

Allentown, PA - Plant Expansion Steel Pipe Spec. No. 671-S40 December 31, 2015 Steel DIVISION 15: MECHANICAL SECTION 15061: STEEL PIPE 1.0 GENERAL All materials shall be of high quality and as per the following specifications. 2.0 PRODUCTS 2.1 Specification CS-1 Service = (CA, VAC)

More information

Barofor Round System (polyester coated) Panels, Posts, Accessories

Barofor Round System (polyester coated) Panels, Posts, Accessories 1 Scope This Technical Data Sheet specifies the requirements for the Barofor Round System. The complete system exists of: Panels Posts Accessories such as fixation system and posts caps. Panels and posts

More information

5/16" Flange nut. Bolt Keeper Plate (8" Sq. SYS.) (3) 1/2" x 3" Hex head connector zinc plated bolt w/ washers and nut. Anchor 3" sq. 7 Ga.

5/16 Flange nut. Bolt Keeper Plate (8 Sq. SYS.) (3) 1/2 x 3 Hex head connector zinc plated bolt w/ washers and nut. Anchor 3 sq. 7 Ga. 2 1/2" x 2 1/2" x 10 Ga. 6" 5" 4" Variable Slipbase (8" Sq. SYS.) 5/16 Corner Bolt W/ nut 5/16" Flange nut Stub Insert (8" Sq. SYS.) Bolt Keeper Plate (8" Sq. SYS.) (3) 1/2" x 3" Hex head connector zinc

More information

Standard Specification for High-Strength Bolts for Structural Steel Joints [Metric] 1

Standard Specification for High-Strength Bolts for Structural Steel Joints [Metric] 1 Designation: A 325M 00 METRIC An American National Standard Standard Specification for High-Strength Bolts for Structural Steel Joints [Metric] 1 This standard is issued under the fixed designation A 325M;

More information

Woven Steel Wire Fence Type-47. Under the state specification for fencing, ASTM A 116 is called out.

Woven Steel Wire Fence Type-47. Under the state specification for fencing, ASTM A 116 is called out. Woven Steel Wire Fence Type-47 Under the state specification 710.02 for fencing, ASTM A 116 is called out. Go to the steel and fencing certification manual for more information about the basic properties

More information

ROYAL ULTRA-PRECISION ER COLLETS " TIR

ROYAL ULTRA-PRECISION ER COLLETS  TIR ROYAL C EXPANDING COLLETS q Unlike chucks and most collets that grip the OD of a workpiece, C expanding collets are designed to grip on the ID of a part. q Accu-length design ensures precise workpiece

More information

Elcometer Conical Mandrel Bend Tester

Elcometer Conical Mandrel Bend Tester English Elcometer 1510 Conical Mandrel Bend Tester Operating Instructions English is a registered trademark of Elcometer Instruments Ltd. All other trademarks acknowledged. Copyright Elcometer Instruments

More information

ICC-ES Evaluation Report

ICC-ES Evaluation Report ICC-ES Evaluation Report ESR-6 Reissued April, 009 This report is subject to re-examination in two years. www.icc-es.org (800) 4-6587 (56) 699-054 A Subsidiary of the International Code Council DIVISION:

More information

NTTC Tank Truck Week Awareness Gaskets/Fasteners/Flanges

NTTC Tank Truck Week Awareness Gaskets/Fasteners/Flanges NTTC Tank Truck Week 2015 Awareness Gaskets/Fasteners/Flanges OVERVIEW 1. Flange 101 Flange Types Inspection & Assembly 2. Gaskets 101 Stress Tightness 3. Fastener 101 Yield Lubrication Bolted Flanged

More information

Product Guide Specification

Product Guide Specification HALFEN USA Inc. March 2012 8521 FM 1976 P.O. Box 547 Converse, TX 78109 Toll Free 800-423-9140 Fax 888-277-1695 Website www.halfenusa.com E-mail info@halfenusa.com Product Guide Specification Specifier

More information

ROUND STEEL POLE STRAIGHT

ROUND STEEL POLE STRAIGHT PROJECT NAME: CATALOG NUMBER: NOTES: FIXTURE SCHEDULE: Page: 1 of 7 ROUND STEEL POLE SPECIFICATIONS: Pole Shaft The pole shaft is fabricated from hot rolled steel tubing of onepiece construction with a

More information

JIS G3465 Seamless Steel Tubes for Drilling

JIS G3465 Seamless Steel Tubes for Drilling JIS G3465 Seamless Steel Tubes for Drilling 1. Scope This Japanese Industrial Standard specifies the seamless steel tubes, hereinafter referred to as the "tubes", used for casing tube, core tube and drill

More information

MB Commercial High Carbon Spring Wire

MB Commercial High Carbon Spring Wire MB Commercial High Carbon Spring Wire Quench & Tempered M.B Class I and Class II Spring Wire - Round Quench & Tempered Cold Rolling Quality (CRQ) MB grade wire is used extensively in applications where

More information

A representative from Occupational Health is to be involved in the commissioning process to address any Respiratory Protection Program requirements.

A representative from Occupational Health is to be involved in the commissioning process to address any Respiratory Protection Program requirements. SPEC-3017 1/8 1.0 PURPOSE This specification describes the minimum requirements for the installation of breathing air distribution systems (indoor and outdoor) up to the connection to the breathing air

More information

PRODUCT CATALOGUE. Major Features: Arc Bends Manufactured to: Pipestar now offering full-line of flanged Arcbends

PRODUCT CATALOGUE. Major Features: Arc Bends Manufactured to: Pipestar now offering full-line of flanged Arcbends PRODUCT CATALOGUE Pipestar now offering full-line of flanged Arcbends Pipestar offers a range of seamless long radius Arc HDPE sweep bends made to the highest quality standards. Pipestar offers a range

More information

PIPE/CONDUIT SUPPORTS

PIPE/CONDUIT SUPPORTS PIPE/CONDUIT SUPPORTS Pipe/Conduit Clamps...102-105 Unicushion... 106 Pipe & Tubing (Cush-A-Clamp ) Clamps...107-110 Pipe Hangers... 111 Pipe Rollers...111-112 Pipe Brackets... 113 Reference Tables...114-120

More information

Chemical composition. Type 2 as per F568: C ( ); P (max 0.048); S (max 0.058); Mn (min 0.74); B (min );

Chemical composition. Type 2 as per F568: C ( ); P (max 0.048); S (max 0.058); Mn (min 0.74); B (min ); BS EN 14399 HIGH STRENGTH STRUCTURAL BOLTING FOR PRE LOAD Direct comparison as an alternative to ASTM HSFG Bolts ASTM A325M Type 1, ASTM A490M Type 1 or 2 BS EN 14399-3:2005 Grade 8.8 and 10.9 Chemical

More information

LEGACY 440 FENCING. 62 Premium Products, Premium Service... Direct to Your Door.

LEGACY 440 FENCING. 62 Premium Products, Premium Service... Direct to Your Door. LEGACY 440 FENCING There are multitudes of fencing choices on the market today and each has a specific purpose. These choices are narrowed by the intended use of the fence and the choice becomes further

More information

THE IMPORTANCE OF THE FITTING

THE IMPORTANCE OF THE FITTING JOHNSON RISER PIPES Geometrical characteristics (diameter, depth), pump pressure and water quality are the principal factors determining the choice of the riser pipe and the fitting type. These choices

More information

Standard Specification for Carbon and Alloy Steel Nuts [Metric] 1

Standard Specification for Carbon and Alloy Steel Nuts [Metric] 1 Designation: A 563M 04 METRIC Standard Specification for Carbon and Alloy Steel Nuts [Metric] 1 This standard is issued under the fixed designation A 563M; the number immediately following the designation

More information

Content. Hot-dip galvanized narrow strip. Areas of application. Product information

Content. Hot-dip galvanized narrow strip. Areas of application. Product information Steel Hot-dip galvanized narrow strip Product information Issue: October 2016, version 0 Areas of application Hot-dip galvanized narrow strip from thyssenkrupp combines the advantages of batch galvanizing

More information

CWM. Agricultural, Commercial, Industrial Product Brochure.

CWM. Agricultural, Commercial, Industrial Product Brochure. CWM Agricultural, Commercial, Industrial Product Brochure 1688 West 75 th Avenue Vancouver, BC V6P 6G2 Canada Canada Wire & Metal Inc is a Canadian based entity that was founded in 1994. We have been serving

More information

English version. Steel and steel products Location and preparation of samples and test pieces for mechanical testing (ISO 377:1997)

English version. Steel and steel products Location and preparation of samples and test pieces for mechanical testing (ISO 377:1997) EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM EN ISO 377 July 1997 ICS 77.040.10; 77.140.01 Descriptors: See ISO document English version Steel and steel products Location and preparation of samples

More information

HEADLINE BUILDING MATERIALS

HEADLINE BUILDING MATERIALS EADLINE BUILDING MATERIALS eb: www.hbm.ae l Email: commercial@hbm.ae eavy ex Structural Bolts ASTM A 325M Metric Series Dimensions P.O. Box 37366, Dubai, UAE l Tel: +971 4 3475675 l Fax: +971 4 347 5485

More information

WESTERN WIRE PRODUCTS

WESTERN WIRE PRODUCTS WESTERN WIRE PRODUCTS Celebra ng 100 years of Quality and Service 1914 2014 Thanks to our dedicated employees and customers we are celebra ng 100 years of being in business and we look forward to servicing

More information

Standard Specification for Copper-Clad Steel Wire for Electronic Application 1

Standard Specification for Copper-Clad Steel Wire for Electronic Application 1 Designation: B 45 0 Standard Specification for Copper-Clad Steel Wire for Electronic Application 1 This standard is issued under the fixed designation B 45; the number immediately following the designation

More information

SECTION METAL FABRICATIONS

SECTION METAL FABRICATIONS SECTION 05100 PART 1 - GENERAL 1.01 DESCRIPTION A. Section includes specifications for metal fabrications, including minimum requirements for fabricator, and galvanizing. 1.02 REFERENCE STANDARDS A. ASTM

More information

SQUARE STEEL POLE STRAIGHT

SQUARE STEEL POLE STRAIGHT PROJECT NAME: CATALOG NUMBER: NOTES: FIXTURE SCHEDULE: Page: 1 of 8 SQUARE STEEL POLE SPECIFICATIONS: Pole Shaft The pole shaft is fabricated from hot rolled steel tubing of onepiece construction with

More information

PRODUCT CATALOGUE. Welded Carbon Steel Pipe

PRODUCT CATALOGUE. Welded Carbon Steel Pipe Welded Carbon Steel Pipe FOR WATER BORE AND GENERAL DRILLING APPLICATIONS PRODUCT CATALOGUE Water Bore Casing to Australian Standard AS 1396 General Drilling Casing in Accordance with J.55 Grade and API

More information

Technical Information Smartec CLD18

Technical Information Smartec CLD18 TI01080C/07/EN/02.14 71264779 Products Solutions Services Technical Information Smartec CLD18 Compact inductive conductivity measurement for the food and beverage industry Application Compact measuring

More information

11-1/4 OD at Transition Point. Microcosmic. 4th and Brannan Street Platform Station Project. Elevation. Moto Ohtake 2014

11-1/4 OD at Transition Point. Microcosmic. 4th and Brannan Street Platform Station Project. Elevation. Moto Ohtake 2014 74 480 330 90 72 180 150 60 90 18 11- OD at Transition Point 36 184 74 Microcosmic Elevation 14 1 Moto Ohtake I. GENERAL NOTES: A. SCULPTURE DESIGN CRITERIA 1. CALIFORNIA BUILDING CODE (CBC, 2010 EDITION)

More information

!"# $%& '()*(+%,-. /#--) 0"+.1%# --- บร ษ ท เอ นไซ กร ป จ าก ด ---

!# $%& '()*(+%,-. /#--) 0+.1%# --- บร ษ ท เอ นไซ กร ป จ าก ด --- !"# $%& '()*(+%,-. /#--) 0"+.1%# w บรษ w ท w.e เอ น ns ไซ ci กร gr ป ou จ า p. ก ด co -m - --- w บรษ w ท w.e เอ น ns ไซ ci กร gr ป ou จ า p. ก ด co -m - --- Product Specification *Weights and Dimensions

More information

SECTION TRAFFIC SIGNAGE

SECTION TRAFFIC SIGNAGE SECTION 10 14 53 TRAFFIC SIGNAGE PART 1 - GENERAL 1.01 SECTION INCLUDES A. Furnishing and installing roadside traffic signage. B. Providing additional traffic signs as required in Sections 01 55 28 Controlling

More information

This specification describes the minimum requirements for piping systems for the following service:

This specification describes the minimum requirements for piping systems for the following service: SPEC-3004 1/7 1.0 APPLICATION This specification describes the minimum requirements for piping systems for the following service: Service Water Design Conditions Operating Conditions 10 PSIG @ 33 o F to

More information

SECTION EXPANSION FITTINGS AND LOOPS FOR HVAC PIPING

SECTION EXPANSION FITTINGS AND LOOPS FOR HVAC PIPING SECTION 230516 - EXPANSION FITTINGS AND LOOPS FOR HVAC PIPING PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and

More information

This specification describes the minimum requirements for piping systems for the following service:

This specification describes the minimum requirements for piping systems for the following service: 201/01/13 1/ 1.0 APPLICATION This specification describes the minimum requirements for piping systems for the following service: Service Air Design Conditions Operating Conditions Blast Air (see Note 1)

More information

Fluid Sealing Association

Fluid Sealing Association Fluid Sealing Association STANDARD FSA-MG-501-02 STANDARD TEST METHOD FOR INWARD BUCKLING OF SPIRAL-WOUND GASKETS 994 Old Eagle School Road, Suite 1019 Wayne, Pennsylvania 19087-1866 Phone: (610) 971-4850

More information

This specification describes the minimum requirements for piping systems for the following service:

This specification describes the minimum requirements for piping systems for the following service: 201/11/2 1/9 1.0 APPLICATION This specification describes the minimum requirements for piping systems for the following service: Underground Service Water Note: This specification does not apply to piping

More information

GURANTEED TECHNICAL PARTICULARS OF BACK CLAMP FOR LT CROSS ARM

GURANTEED TECHNICAL PARTICULARS OF BACK CLAMP FOR LT CROSS ARM Technical Specification of Back Clamp for LT Cross Arm (MS) Back clamp for LT Cross Arm made out of 50 x 6mm MS Flat suitable for 8m X 300 Kg PSC poles. After fabrication the cross arm shall be painted

More information

FNW can handle all your hanger and fastener needs, all in one place. FNW products are sold exclusively at Ferguson.

FNW can handle all your hanger and fastener needs, all in one place. FNW products are sold exclusively at Ferguson. FASTENERS PIPE HANGERS, SUPPORTS & STRUT ACCESSORIES FNW can handle all your hanger and fastener needs, all in one place. FNW products are sold exclusively at Ferguson. Quick Reference Nuts Heavy Hex Nuts...4

More information

012: 2015 CEB SPECIFICATION GALVANIZED STEEL WIRE (EXCEPT SHIELDING WIRE FOR TOWER LINE APPLICATION)

012: 2015 CEB SPECIFICATION GALVANIZED STEEL WIRE (EXCEPT SHIELDING WIRE FOR TOWER LINE APPLICATION) 012: 2015 CEB SPECIFICATION GALVANIZED STEEL WIRE (EXCEPT SHIELDING WIRE FOR TOWER LINE APPLICATION) CEYLON ELECTRICITY BOARD SRI LANKA Telephone: +94 11 232 8051 Fax: +94 11 232 5387 CONTENTS Page 1.0

More information

Specifications - Common Nails Diamond point, Flat head, round smooth shank, Bright, HDG, EG or cement coated (resin or vinyl) finish

Specifications - Common Nails Diamond point, Flat head, round smooth shank, Bright, HDG, EG or cement coated (resin or vinyl) finish Specifications - Common Nails Diamond point, Flat head, round smooth shank, Bright, HDG, EG or cement coated (resin or vinyl) finish ASTM F 1667-05 Table 15 Type 1, Style 10 - Common Nails Size Length

More information

Threaded Products Gaskets & Seals Precision Machining

Threaded Products Gaskets & Seals Precision Machining Threaded Products Gaskets & Seals Precision Machining FIRST CALL, ONLY CALL Dan-Loc Group was formed with the merger of Texthread, Dan-Loc Bolt & Gasket, and Spensall. Dan-Loc Group is a manufacturer and

More information

CH # 8. Two rectangular metal pieces, the aim is to join them

CH # 8. Two rectangular metal pieces, the aim is to join them CH # 8 Screws, Fasteners, and the Design of Non-permanent Joints Department of Mechanical Engineering King Saud University Two rectangular metal pieces, the aim is to join them How this can be done? Function

More information

SECTION HOLLOW METAL DOORS AND FRAMES

SECTION HOLLOW METAL DOORS AND FRAMES PART 1 GENERAL 1.01 SECTION INCLUDES SECTION 08 11 13 HOLLOW METAL DOORS AND A. Non-fire-rated hollow metal doors and frames. B. Hollow metal frames for wood doors. C. Fire-rated hollow metal doors and

More information

Suflex Astra 703/105. Features. Product Description. Suggested Applications VW-1 Rated Mechanical Tubing

Suflex Astra 703/105. Features. Product Description. Suggested Applications VW-1 Rated Mechanical Tubing VW-1 Rated Mechanical Tubing Temp Class: Class A (105 C) Grades Available: C Material: Polyvinylchloride Tubing Sizes Available: AWG #24 through 2-1/2" I.D. Colors Available: Clear, Black Applicable Standards:

More information

Designation: F

Designation: F Designation: F 852 05 Standard Specification for Twist Off Type Tension Control Structural Bolt/Nut/Washer Assemblies, Steel, Heat Treated, 20/05 ksi Minimum Tensile Strength This standard is issued under

More information

PIP STF05121 Anchor Fabrication and Installation Into Concrete

PIP STF05121 Anchor Fabrication and Installation Into Concrete June 2017 Structural PIP STF05121 Anchor Fabrication and Installation Into Concrete PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES In an effort to minimize the cost of process industry facilities, this

More information

Sprinkler wet pipe and dry pipe. For FM approval of the dry pipe model "I" shall be used. SBF 120: 7 applies to model "E".

Sprinkler wet pipe and dry pipe. For FM approval of the dry pipe model I shall be used. SBF 120: 7 applies to model E. Product Name Nordic Flow FM Thin Wall Pipes Application Sprinkler wet pipe and dry pipe. For FM approval of the dry pipe model "I" shall be used. SBF 120: 7 applies to model "E". Manufacturing Standard

More information

Standard Specification for High-Strength Steel Bolts, Classes 10.9 and , for Structural Steel Joints [Metric] 1

Standard Specification for High-Strength Steel Bolts, Classes 10.9 and , for Structural Steel Joints [Metric] 1 Designation: METRIC Standard Specification for High-Strength Steel Bolts, Classes 10.9 and 10.9.3, for Structural Steel Joints [Metric] 1 This standard is issued under the fixed designation A 490M; the

More information

Your Global Sales Partner

Your Global Sales Partner Your Global Sales Partner www.techlineint.com THE TECHLINE COMMITMENT As a leader in global sourcing since 1982, we are dedicated to placing the world s manufacturing capabilities within the grasp of our

More information

WIRE CLOTH. PRODUCT CATALOG ISO 9001:2008 Certified

WIRE CLOTH. PRODUCT CATALOG ISO 9001:2008 Certified WIRE CLOTH PRODUCT CATALOG info@directmetals.com ISO 9001:2008 Certified table of contents SAFETY GRATING wire cloth WE LL CUT ANYTHING IN OUR INVENTORY TO YOUR SPECS! Terminology... 1 Fabricated Filters...

More information

Midwest Roadside Safety Facility

Midwest Roadside Safety Facility B 64" 1626 602'-8 1/16" 183695 548'-0" 167030 1 2 3 4 5 6 7 8 9 10 11 12 14 15 16 17 18 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 373839 40 25 IMPACT 1500A 48" 12 27'-5" 8355 [] 3x7 CL A Galvanized

More information

I-W07/W77. Couplings DETAIL A WARNING. Photo Showing Pipe with Weld Seam Ground 6 inches/152 mm Back from Pipe End and an AGS Groove

I-W07/W77. Couplings DETAIL A WARNING. Photo Showing Pipe with Weld Seam Ground 6 inches/152 mm Back from Pipe End and an AGS Groove WARNING Read and understand all instructions before attempting to install any Victaulic piping products. These products must be used only on pipe that is prepared to Victaulic Advanced Groove System (AGS)

More information

AUDAS. Tel: Fax: No.259 Baichi north Rd.Haiyan.Zhejiang.

AUDAS. Tel: Fax: No.259 Baichi north Rd.Haiyan.Zhejiang. Standard State SECTION A : SCREW THREAD Basic elements of screw thread design ANSI/ASME B1.7M Nomenclature.Definitions and letter symbols for screw thread ASME B1.1 Unified inch screw thread ( UN and UNF

More information

WIRELINE RODS CARE AND HANDLING

WIRELINE RODS CARE AND HANDLING WIRELINE RODS CARE AND HANDLING Drilling companies constantly need to achieve greater depths, while machines are increasingly more powerful and faster. Heat treatment applied to rod ends, enhances their

More information

OUR QUALITY POLICY VISION MISSION

OUR QUALITY POLICY VISION MISSION AUSTENITE FASTENERS PVT.LTD. A unique name in fasteners line has come long way since its taking over Krishna Engineering Company which was established in 1999. The company has it is manufacturing plant

More information

Standard Specification for Steel Transmission Tower Bolts, Zinc-Coated and Bare 1

Standard Specification for Steel Transmission Tower Bolts, Zinc-Coated and Bare 1 Designation: A 94 0 Standard Specification for Steel Transmission Tower olts, Zinc-Coated and are This standard is issued under the fixed designation A 94; the number immediately following the designation

More information

RR-F-191/1D 14 May SUPERCEDING RR-F-191/1C July 22, 1981 FEDERAL SPECIFICATION SHEET

RR-F-191/1D 14 May SUPERCEDING RR-F-191/1C July 22, 1981 FEDERAL SPECIFICATION SHEET 14 May 1990 ----------- SUPERCEDING RR-F-191/1C July 22, 1981 FEDERAL SPECIFICATION SHEET FENCING, WIRE AND POST METAL (CHAIN-LINK FENCE FABRIC) (DETAIL SPECIFICATION) This Federal Specification is approved

More information

Drawing. Fig. 1 Drawing

Drawing. Fig. 1 Drawing Drawing Drawing is a metalworking process which uses tensile forces to stretch metal. It is broken up into two types: sheet metal drawing and wire, bar, and tube drawing. The specific definition for sheet

More information

Balaji THE COMPANY MISSION

Balaji THE COMPANY MISSION 82, GANGOTRI INDUSTRIAL ESTATE, OPP. PANCHRATNA ESTATE, NR. RAMOL OVER BRIDGE, VATVA-382445.(GUJARAT), INDIA. Website : www.balajifasteners.co.in E-mail : info@balajifasteners.co.in OUR QUALITY POLICY

More information

Contents. Grade 2, 5, 8 Hex Bolts 4. Heavy Hex Head Structural Bolts 6. A325 and A490 Tension Control Bolts (TC) 13. Nuts 22.

Contents. Grade 2, 5, 8 Hex Bolts 4. Heavy Hex Head Structural Bolts 6. A325 and A490 Tension Control Bolts (TC) 13. Nuts 22. Who we are Amcan Jumax is the result of a merging between Boulons Jumax and Amcan Threaded Products, two successful companies well established, both with excellent reputations. The new entity is a bigger

More information

SECTION CHAIN LINK FENCING AND GATES

SECTION CHAIN LINK FENCING AND GATES PART 1 GENERAL 1.01 SCOPE OF WORK A. The Contractor shall furnish and install all materials, labor, equipment and incidentals required to provide chain link fencing and gates as Shown on the Contract Drawings

More information

SURFACE VEHICLE STANDARD

SURFACE VEHICLE STANDARD 400 Commonwealth Drive, Warrendale, PA 15096-0001 SURFACE VEHICLE STANDARD J429 Issued 1949-01 Revised 1999-01 REV. JAN1999 Submitted for recognition as an American National Standard Superseding J429 MAY1998

More information

Volume II: Xirtec 140 PVC Corzan Dimensional Data & Weights

Volume II: Xirtec 140 PVC Corzan Dimensional Data & Weights Volume II: Xirtec 140 PVC & CPVC Corzan Dimensional Data & Weights Industrial Technical Manual Series T H I R D E D I T I O N IPEX XIRTEC 140 PVC & CORZAN CPVC Dimensional Data and Weights IPEX Xirtec

More information

001: 2007 CEB STANDARD

001: 2007 CEB STANDARD 001: 2007 CEB STANDARD ALUMINIUM RE-DRAW RODS FOR ELECTRICAL PURPOSES CEYLON ELECTRICITY BOARD SRI LANKA Specification for ALUMINIUM RE-DRAW RODS FOR ELECTRICAL PURPOSES CEB Standard 001: 2007 CEYLON ELECTRICITY

More information

Standard Specification for Steel Transmission Tower Bolts, Zinc-Coated and Bare 1

Standard Specification for Steel Transmission Tower Bolts, Zinc-Coated and Bare 1 Designation: A 94 0 e Standard Specification for Steel Transmission Tower olts, Zinc-Coated and are This standard is issued under the fixed designation A 94; the number immediately following the designation

More information

BRAZING PROCEDURE SPECIFICATION NO

BRAZING PROCEDURE SPECIFICATION NO NATIONAL CERTIFIED PIPE WELDING BUREAU BRAZING PROCEDURE SPECIFICATION NO. 107-1 FOR TORCH BRAZING OF ALLOYS 102, 120, 122, 142, 192 OF TUBE, VALVES, FITTING AND FLANGES USING BcuP-3 THROUGH-7 FILLER METALS

More information

Testing. Material testing will be according to applicable AASHTO, ASTM or Department methods as specified.

Testing. Material testing will be according to applicable AASHTO, ASTM or Department methods as specified. 907.01 Section 907. FENCING MATERIALS 907.01 General Requirements. Materials for use in fencing property, right-of-way and other installations must comply with this section. 907.02 Testing. Material testing

More information

OPTIFLUX 5000 Technical Datasheet

OPTIFLUX 5000 Technical Datasheet OPTIFLUX 5000 Technical Datasheet Electromagnetic flowmeter in flanged version Exceptional long-term stability and accuracy For highly aggressive and abrasive fluids Fully vacuum-resistant with high-tech

More information

CERTIFICAT D'ASSEMBLAGE ASSEMBLY CERTIFICATE

CERTIFICAT D'ASSEMBLAGE ASSEMBLY CERTIFICATE 12770 Rue Brault, Mirabel QC, J7J 1P3 Sans Frais / Toll Free 1 888 657.2203 Tel. : 450 420.1839 Fax : 450 420.3882 mtr@boulonsplus.net www.boulonsplus.net CERTIFICAT D'ASSEMBLAGE ASSEMBLY CERTIFICATE SVP

More information

OPTIFLUX 5000 Technical Datasheet

OPTIFLUX 5000 Technical Datasheet OPTIFLUX 5000 Technical Datasheet Electromagnetic flowmeter in flanged version Exceptional long-term stability and accuracy For highly aggressive and abrasive fluids Fully vacuum-resistant with high-tech

More information

Convex Strainers DN PN 80, 100, 200

Convex Strainers DN PN 80, 100, 200 55 Convex Strainers DN 400-1000 PN 80, 100, 200 Designed for protection of compressor rotor bundle against foreign-object damage. Working medium is non-aggressive natural gas and other non-aggressive media

More information

COMMERCIAL ITEM DESCRIPTION RODS, GROUND (WITH ATTACHMENTS)

COMMERCIAL ITEM DESCRIPTION RODS, GROUND (WITH ATTACHMENTS) INCH-POUND 30 May 2002 SUPERSEDING A-A-55804 11 March 1996 COMMERCIAL ITEM DESCRIPTION RODS, GROUND (WITH ATTACHMENTS) The General Services Administration has authorized the use of this commercial item

More information

SECTION CUSTOM FABRICATED EQUIPMENT

SECTION CUSTOM FABRICATED EQUIPMENT SECTION 11401 CUSTOM FABRICATED EQUIPMENT PART 1 GENERAL 1.01 SUMMARY A. Related Sections: 1. 05500 - Metal Fabrications. 2. 10100 - Chalkboards, Markerboards, Tackboards, and Bulletin Board Cabinets.

More information

DRAWN SEAMLESS ALUMINUM TUBE CAPABILITIES

DRAWN SEAMLESS ALUMINUM TUBE CAPABILITIES H A R D A L L Y T U B E & P I P E DRAWN SEAMLESS ALUMINUM TUBE CAPABILITIES STANDARD ALLYS & TEMPERS 3003 6061 6063 00 06 K49A T3 H H32 T4 T31 H14 H34 T32 T6 T6 T3 STANDARD ALLYS & SPECIFICATINS* 3003

More information

SECTION ELECTRICAL IDENTIFICATION

SECTION ELECTRICAL IDENTIFICATION SECTION 16075 ELECTRICAL IDENTIFICATION PART 1 - GENERAL 1.01 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification

More information

Structural Bolting. Notice the Grade 5 has a much smaller head configuration and a shorter shank then the grade A325 structural bolt.

Structural Bolting. Notice the Grade 5 has a much smaller head configuration and a shorter shank then the grade A325 structural bolt. Structural Bolting ASTM F3125/F3125M is a structural bolt specification covering inch and metric bolt grades. This specification contains 4 inch series bolting grades: A325, F1852, A490, and F2280. These

More information

LCSF Low Clearance Split Frame

LCSF Low Clearance Split Frame Designed For Portability And Limited Clearance Full Range 2in - 48in for Pipe and Tube Optional Bridge Slide for Heavy Wall Pipe EXTERNALLY MOUNTED PORTABLE PIPE CUTTING AND BEVELING SYSTEM E.H. Wachs

More information

Wire Drawing 7.1 Introduction: stock size

Wire Drawing 7.1 Introduction: stock size Wire Drawing 7.1 Introduction: In drawing, the cross section of a long rod or wire is reduced or changed by pulling (hence the term drawing) it through a die called a draw die (Fig. 7.1). Thus, the difference

More information

PART MATERIALS. Section Fencing Materials. Description

PART MATERIALS. Section Fencing Materials. Description PART 03000 - MATERIALS Section 03010 - Fencing Materials Description 03010.00 Scope - This section consists of the test requirements, specifications and tolerances for barbed wire, woven wire and chain

More information