DIALOGIC FASTENERS 3161 STATE RD BENSALEM PA USA PHONE: FAX:
|
|
- Owen Young
- 6 years ago
- Views:
Transcription
1 DIALOGIC FASTENERS PHONE: FAX: REGISTERED ISO-9001:2008 AS-9120 COMPLIANT
2 TABLE OF CONTENTS COMPANY CAPABILITY MACHINE SCREWS SOCKET HEAD CAPS SET SCREWS & SEMS BOLTS ANSI BOLTS SHORT RUN SPECIALS INSERTS & RETAINING RINGS LOCKING ELEMENT PARTS NUTS LOCK WASHERS PINS CLAMPS BRACKETS, SUPPORT BLOCKS, & CLIPS METRIC, ASME, SAE SPECIAL REQUIREMENTS SPECIAL PACKAGING INVENTORY STOCK
3 COMPANY CAPABILITY 1 Business Overview Dialogic Fasteners, incorporated in PA, is a third generation US domestic supplier of quality Aerospace, Military and Specialty fasteners products since We specialize in parts that meet Military Specifications including AN, MS, and NAS standards, as well as ANSI 1821, 1822, 1823, and 1824 standards. We produce specialty items that meet a wide variety of Government Ordnance drawing requirements, and can provide fasteners of any type from an inventory of 35,000+ parts. Specifications Quotes available for Bolts, Screws, Pins, Rivets, Washers, Nuts and any specialty items Military Spec Fasteners (MS) Federal Specification, NASM Mil-Specs, ASTM/ANSI Standards, NAS Mil-Specs SAE Standards NA/NAM Metric Standards Air Force & Navy Aeronautical Standards (AN) Parts made to National Stock Number (NSN) Quality Assurance Compliant with MIL-I45208A by the Department of Defense Approved by the Defense Supply Center as QML/QSLM Supplier Key Registrants Registered ISO-9001: Certificate Number: Compliant: AS-9120 DUNS: Registered CCR/ORCA CAGE Code: 0NFB8 NAICS: , , , Federal Supply Classifications: 5305, 5306, 5307, 5310, 5315, 5320, 5325, 5340, 5365 Joint Certification Program (JCP) - Number:
4 MACHINE SCREWS 2 MILITARY SPECS MS21093-MS21094 MS24693-MS24694 MS35206-MS35207 MS35214-MS35215 MS35218 MS51957-MS51960 NAS601-NAS608 NAS662 NAS1133-NAS1138 NAS1153-NAS1158 NAS1581 NAS1635 NAS1801-NAS1802
5 SOCKET HEAD CAPS 3 MILITARY SPECS MS16995 MS16996 MS16997 MS16998 MS21098 MS21295-MS21296 NAS1351 MS24667 MS24668 MS24671 MS24672 MS35457 MS51975-MS51976 NAS1352
6 SET SCREWS & SEMS 4 MILITARY SPECS MS50121 MS50131 NAS565 MS51963 MS51964 MS51973 SEMS PER PRINT REQUIREMENTS
7 BOLTS 5 MILITARY SPECS MS21250 MS21279 MS35763 MS35764 MS35751 MS35335 MS35307-MS35312 MS9500-MS9501 MS9565-MS9566 NAS464 NAS1103-NAS1112 NAS1303-NAS1312 NAS6203-NAS6212 AN BOLTS
8 ANSI BOLT 6 MILITARY SPECS MS90725-MS90728 MS18153 MS18154 B1821AH B1821BH B18231
9 SHORT RUN SPECIALS 7 SCREWS, BOLTS, STUDS, WASHERS, PINS ALL SMALL SIZES UP TO 2½ INCH DIAMETER 300 SERIES INCLUDING COLD WORKED & STRAINED HARDEN MATERIAL 400 SERIES GRADE K-500 MONEL GR 718 INCONEL
10 INSERTS & RETAINING RINGS 8 MILITARY SPECS MS51830 MS51831 MS16624 MS16625 NAS1395
11 LOCKING ELEMENT PARTS 9 LONG LOK NYLOK CORP ND INDUSTRIES PELLET, STRIP OR PATCH MIL-DTL-18240
12 NUTS 10 MILITARY SPECS MS9100 MS16285-MS16286 MS19068 MS35649 * MS35650 * MS35690 MS35691-MS35692 MS51971-MS51972 MS51967-MS51968 MS51969-MS51970 NAS1423 NAS509 * AVAILABLE IN ALL MATERIALS
13 LOCK WASHER 11 MILITARY SPECS MS35335 MS35336 MS35338 * SPECIAL LOCK WASHER PER PRINT * AVAILABLE IN ALL MATERIALS
14 PINS 12 MILITARY SPECS MS16555 MS16556 MS16562 MS20392 MS24665 MS35671 MS39086
15 CLAMPS 13 MILITARY SPEC NASM1712-NASM1715 NASM21122 NASM21919 NAS1922 NASM21333-NASM21334 AN735, AN742, AN743 MS9025, MS9353, M85052 KMC CLAMPS HOSE CLAMPS BREEZE CLAMPS CLAMPS PER PRINT CORBIN CLAMPS
16 BRACKETS, SUPPORT BLOCKS, & CLIPS 14 MILITARY SPECS MS9551 MS9554-MS9559 MS9600, MS9601, MS9603 QUOTES AVAILABLE PER PRINT REQUIREMENTS FOR ALL ITEMS. SUPPORT BLOCK STYLE A, B, & C J-CLIPS U-CLIPS
17 METRIC, ASME, & SAE 15 ALL ITEMS CAN BE QUOTED TO METRIC, ASME, & SAE STANDARDS. SCREWS BOLTS PINS STUDS WASHERS EXAMPLE PART NUMBER S STARTING WITH: AEB, AEN, AES, J2271, J2295, J2655, S300.
18 SPECIAL REQUIREMENTS 16 MIL-DTL-1222J 100 NDT TESTING FULL TEST REPORTS PRODUCT VERIFICATION DFARS COMPLIANT PARTS
19 SPECIAL PACKAGING 17 EQUIPMENT ON-SITE FOR ALL TYPES OF SPECIAL REQUIREMENTS PER REQUEST PACKAGING AVAILABLE WITH 1 ITEM PER BAG INCREMENTS 10, 25, 50, & 100 S
20 INVENTORY STOCK 18 FOR INVENTORY OF OUR STOCK ITEMS, CLICK ON A WEBSITE LINK BELOW
Our Values. Profile. Mission. Engineering Know-How. Performance. Security
(86-272-56) Our Values Performance A SOLUTION OF High Strength Anti Loose Corrosion Chemical Resistance Solution Profile SYNERGIX, a SINGAPORE SME company since year 2000. It s operation specialize in
More informationSEALING METHODS AND HARDWARE FOR EQUIPMENT AND PROCESSES APRIL 11-12, 2018
SEALING METHODS AND HARDWARE FOR EQUIPMENT AND PROCESSES APRIL 11-12, 2018 SEALING METHODS AND HARDWARE FOR EQUIPMENT AND PROCESSES INTRODUCTION to APM HEXSEAL PURPOSE To review various ways to seal equipment
More informationDETAIL SPECIFICATION SHEET FITTING, INSTALLATION, FLARED TUBE AND HOSE, SWIVEL
INCH-POUND MS33786B 12 February 2013 SUPERSEDING MS33786A 1 February 1985 DETAIL SPECIFICATION SHEET FITTING, INSTALLATION, FLARED TUBE AND HOSE, SWIVEL This specification is approved for use by all Departments
More informationIF YOU DON T SEE IT HERE
www.smithfast.com Drills & Taps & Bits Screws Cotter Drilling Bolts / Hex Capscrews Lag Carraige Hitch Grade 8 Machine Grade Elevator 5 Sheet Spring Metal Roll Grade Eye 2 Square Taper Head set A325 Hex
More informationVARVIT USA, LLC SEQUOIA DRIVE SUITE 101 AURORA,ILLINOIS USA PRODUCT CATALOG
PRODUCT CATALOG With over 50 years of manufacturing experience, The Vescovini Group is one of the major players in the European market producing high quality fasteners, screws, nuts, studs, wheel bolts
More informationWESTERN WIRE PRODUCTS
WESTERN WIRE PRODUCTS Celebra ng 100 years of Quality and Service 1914 2014 Thanks to our dedicated employees and customers we are celebra ng 100 years of being in business and we look forward to servicing
More informationAt Ridgeline Fasteners Ltd.
About Ridgeline Fasteners Ltd. At Ridgeline Fasteners Ltd. we have over twelve years experience importing, distributing, stocking and supplying fasteners to the manufacturing industry. We know how to meet
More informationCOMPLETE MILITARY CERTIFICATIONS OVER
MILITARY HARDWARE WITH COMPLETE MILITARY CERTIFICATIONS OVER 2,000 ITEMS Machine Screws MS24693 100 Flat Phillips 18-8 Stainless DFAR COMPLIANT 18-8 SS w/ Black Oxide Finish DFAR COMPLIANT MS35190 82 Flat
More informationFasteners. Bolts. NAPA FastTrack Counter Sales Training Fasteners Page 1. Figure 1. Typical Measurements for a Bolt or Hex Head Cap Screw
Fasteners Many types and sizes of fasteners are used in the automotive industry. Each fastener is designed for a specific purpose and condition. One of the most commonly used type of fastener is the threaded
More informationThreaded Products Gaskets & Seals Precision Machining
Threaded Products Gaskets & Seals Precision Machining FIRST CALL, ONLY CALL Dan-Loc Group was formed with the merger of Texthread, Dan-Loc Bolt & Gasket, and Spensall. Dan-Loc Group is a manufacturer and
More informationSTAINLESS INDUSTRY LIST
The Worlds Largest Supplier of Socket Screws STAINLESS INDUSTRY LIST CAT#SS0806 Melbourne Sydney Brisbane Perth Auckland BRIGHTONBEST International (AU) PTY LTD. W e are proud to be a TEAM company A cornerstone
More informationFastener Solutions. USA: 866.LAWSON4U ( ) Canada: lawsonproducts.com
USA: 866.LAWSON4U (866.529.7664) Canada: 800.563.1717 lawsonproducts.com Fastener Solutions 2017 Lawson Products, Inc. All rights reserved. Printed in USA. E686V3 (1/17) LAWSON'S FASTENER SOLUTIONS Tru-Torq
More informationAttachment Illustrated Parts List
Attachment Illustrated Parts List Attachment Mfg. No. Description 1695168 Catcher, Clean Sweep Twin, 38" MANUFACTURING, INC. 500 N. Spring Street / PO Box 997 Port Washington, WI 53074-0997 USA Part No.:
More informationGravity Roller Conveyors Service Parts and Assembly Manual
Gravity Roller Conveyors Service Parts and Assembly Manual 8- Rev A Table of Contents Replacement Parts General Safety Information............................. This Page 0 Gravity Roller Conveyor......................................
More informationHiniker Company th St. P.O. Box 3407 Mankato, MN VEHICLE INSTALLATION INSTRUCTIONS FOR: CHEV/GMC 4x4: K1500 SILVERADO/SIERRA
VEHICLE INSTALLATION INSTRUCTIONS FOR: CHEV/GMC x: 007 03 K500 SILVERADO/SIERRA Page of 5 Hiniker Company 58766 0th St. P.O. Box 307 Mankato, MN 5600 INSTRUCTION SHEET NO: 505 Rev. A August 0, 03 IMPORTANT:
More informationPARTS LIST CHARGER 2716 DB
PARTS LIST CHARGER 2716 DB 1 ITEM PART NO. DESCRIPTION QTY. 101 6495381 LEFT OUTER BEARING / PIVOT MOUNT 1 102 9121450 5/16-18 HEX NUT WITH NY-LOK INSERT - PACK OF 5 4 103 9121210 1/4-20 X 5/8 HEX BOLT
More informationC-Series. Fabric Diffuser. Installation Guide. 30 Angle Diffusion. Flat Diffusion COMPONENT DETAILS...3 INSTALLATION
C-Series Fabric Diffuser Installation Guide 30 Angle Diffusion Flat Diffusion COMPONENT DETAILS...............3 INSTALLATION Prepare metal inlet collar for fabric connection.............................
More informationMETRIC FA S T E N E R S
METRIC FASTENERS CAP SCREWS & BOLTS DIN 603 Carriage Bolt, A2 SS DIN 603 Carriage Bolt, A4 SS DIN 931 Class 8.8 Hex Cap Screw, Steel Zinc DIN 931 Class 10.9 Hex Cap Screw, Plain Steel DIN 933 Class 8.8
More informationLARGE SIZE RIVET NUT FAMILY
LARGE SIZE RIVET NUT FAMILY The first product family of its kind Rivet Nuts up to 3/4-10 (M20) AS9100, ISO 9001:2008 AND ISO/TS 16949:2009 CERTIFIED FEATURES & BENEFITS Provide a Strong Thread in Thin
More information488 PARTS LIST 1 3 SCREWS FOR NO. 2 2 FLYWHEEL CAP 3 FLYWHEEL 4 END NUT FOR NO. 10 5 BALL BEARING FOR NO. 3 (1 st ) 6 BALLBEARING FOR NO. 3 (2nd) 7A CLUTCH RACE KEY 7B CLUTCH RACE 7C CLUTCH SPRING 7D 7
More informationTable of Contents. GARD Specialists Co., Inc. GARD Specialists Co., Inc. P.O. Box 157 Eagle River, WI Fax
Table of Contents Heavy Duty Fasteners F-911 Fasteners Introduction... 2 F-911 Fasteners Specifications... 2 F-911 Fasteners Torque Chart... 3 Cap Screws - F-911 Alloy Hex Head, Coarse... 4-9 Assortments,
More informationPACKING LIST MACO V-5000
PACKING LIST MACO V-5000 PART QTY O.D. SIZE LENGTH DESCRIPTION CHECKLIST T47P 4 5/8.050 36 Aluminum Tubing _ T43P 1 7/8.050 48 Aluminum Tubing _ T18P 1 3/4.050 48 Aluminum Tubing _ T15P 1 5/8.050 48 Aluminum
More informationNAVSEA STANDARD ITEM
NAVSEA STANDARD ITEM FY-19 DATE: 01 OCT 2017 CATEGORY: I 1. SCOPE: 1.1 Title: Threaded Fastener Requirements; accomplish 2. REFERENCES: 2.1 Standard Items 2.2 S9086-CJ-STM-010/075, Fasteners 3. REQUIREMENTS:
More informationCOMMERCIAL ITEM DESCRIPTION RODS, GROUND (WITH ATTACHMENTS)
INCH-POUND 30 May 2002 SUPERSEDING A-A-55804 11 March 1996 COMMERCIAL ITEM DESCRIPTION RODS, GROUND (WITH ATTACHMENTS) The General Services Administration has authorized the use of this commercial item
More informationINSTALLATION GUIDE. C20-DH STRAIGHT PARTITION Sprinter Partition ( Perforated Window, No Access, Steel )
INSTALLATION GUIDE C20-DH STRAIGHT PARTITION Sprinter Partition ( Perforated Window, No Access, Steel ) QUICK START GUIDE Phase 1 - Assembly q 1.1 Setup... q 1.2 Partition assembly... 3-4 5-6 Phase 2 -
More informationBMW R1100/R1150GS Instructions for Mounting Medium or Large Pack Rack and Micatech Top Case with Mount Kit
BMW R1100/R1150GS Instructions for Mounting Medium or Large Pack Rack and Micatech Top Case with Mount Kit Thank you for purchasing the Micatech Pack Rack and Top Case, with R1100/1150GS mount kit. Please
More informationAugust 2015 Fastener Industry Technology Update from the IFI
INDUSTRIAL FASTENERS INSTITUTE August 4, 2015 August 2015 Fastener Industry Technology Update from the IFI 1. Standards Organizations Activities a. Standards published recently: i. ASTM A563 - Standard
More informationAIRCRAFT HARDWARE What You Need To Know By Ron Alexander
Page 1 of 6 AIRCRAFT CONSTRUCTION An Article Series by Ron Alexander AIRCRAFT HARDWARE What You Need To Know By Ron Alexander The quality of our workmanship in building an airplane is very important. We
More informationDETAIL SPECIFICATION SHEET
INCH-POUND 25 September 2003 DETAIL SPECIFICATION SHEET HOSE ASSEMBLY LENGTH MEASUREMENT for NAS 1760 and MS8000 SERIES SEAL, (GLOBE SEAL, or RADIUS SEAL) to FLARELESS FITTING END DESIGN This specification
More informationPARTS LIST COMMANDER 20 VAC-TRAC COMMANDER 27 VAC-TRAC FH 541V
PARTS LIST COMMANDER 20 VAC-TRAC COMMANDER 27 VAC-TRAC FH 541V UPPER ASSEMBLY 101 6190481 THROTTLE CABLE FOR MODELS WITH ADDITIONAL CHOKE CABLE 1 101 6190751 THROTTLE CABLE FOR MODELS WITH OUT ADDITIONAL
More informationLimited Warranty And Exclusive Remedy
Limited Warranty And Exclusive Remedy THE WORLD LEADER Deepak Fasteners Ltd., through its Unbrako Division and associated companies, warrants that these products conform to industry standards specified
More informationASSORTMENTS BRONZECLASSWB Above assortment with one #99901 Cabinet, 17 extra dividers, all drawers pre-labeld inside and out.
ASSORTMENTS 34 s BRONZECLASS Body Shop Fastener Starter 71 of the most popular items - Over 1700 pieces. Fasteners Only - No Bins Box Qty. 1 Inside of drawer BRONZECLASSWB Above assortment with one #99901
More informationBLACK OXIDE & BLACK ZINC FASTENERS INCLUDING STEEL & STAINLESS INCH & METRIC
BLACK OXIDE & BLACK ZINC FASTENERS INCLUDING STEEL & STAINLESS INCH & METRIC Black Oxide MACHINE SCREWS (Stainless) 100º 82º MACHINE SCREWS & SEMS (Steel) Combination Pan 100 82º Phillips Fillister Phillips
More informationPARTS LIST WRANGLER 2730 DB & 3330 DB
PARTS LIST WRANGLER 2730 DB & 3330 DB RECOVERY TANK ASSEMBLY ITEM PART NO. DESCRIPTION QTY 101 3392051 TOP PLATE 1 102 9120500 10-24 X 3/8 TRUSS HEAD PHILLIPS SCREW - PACK OF 10 8 103 3392061 GASKET, TOP
More informationAUDAS. Tel: Fax: No.259 Baichi north Rd.Haiyan.Zhejiang.
Standard State SECTION A : SCREW THREAD Basic elements of screw thread design ANSI/ASME B1.7M Nomenclature.Definitions and letter symbols for screw thread ASME B1.1 Unified inch screw thread ( UN and UNF
More informationIn normal joints, the clamping force should equal the working load. In gasketed joints, it should be sufficient to create a seal.
Fastener Quality Act Information Unbrako offers this link to the National Institute of Standards homepage on the Fastener Quality Act as an aide to individuals who need detailed and complete information
More informationS T U D S & Revised 406
C O N C E A L E D - H E A D S E L F - C L I N C H I N G S T U D S & S TA N D O F F S Revised 406 PEM CONCEALED-HEAD STUDS* AND STANDOFFS These studs and standoffs ensure permanent mounting in metal sheets
More informationc. Pins, bolts, and retaining rings b. Washers, locking nuts, and rivets
62 20 HW 8: Fasteners / Force, Pressure, Density Mechanical Systems DUE Mon, 11/21/16 Start of class Check link on website for helpful fastener information Please use a scantron. Material is based primarily
More information2013 and up Dodge 2500/ Stage Rear Install Instructions
D2RX-23-13 2686 Highway 92 - Oskaloosa, IA 52577 phone: 641.673.0468 - fax: 641.673.4168 www.kelderman.com 2013 and up Dodge 2500/3500 2-Stage Rear Install Instructions 1. Remove the spare tire. 2. Remove
More informationSection F TEL-E-SCORE
Section F TEL-E-SCORE December 2009 1F Index No. Part No. Description 1. N.A. Support Bracket 2. N.A. Filler 3. N.A. Base Assembly 4. N.A. Wiring Diagram Decal 5. N.A. Lower Unit Cover 6. N.A. Flat Socket
More informationDETAIL SPECIFICATION SHEET
INCH-POUND MIL-DTL-24308/40 1 April 2015 DETAIL SPECIFICATION SHEET CONNECTORS, ELECTRIC, RECTANGULAR, MINIATURE, COMBINATION INSERT ARRANGEMENT, PLUG, SOCKET CONTACTS, SHELL SIZE 5, SIZE 20 SIGNAL CONTACTS
More informationDETAIL SPECIFICATION SHEET FITTINGS, PIPE, CAST BRONZE, SILVER-BRAZING; REDUCING COUPLING, BUSHING, AND ADAPTER, PIPE
INCH-POUND MIL-DTL-1183/8B 20 December 2016 SUPERSEDING MIL-F-1183/8A 5 May 1987 DETAIL SPECIFICATION SHEET FITTINGS, PIPE, CAST BRONZE, SILVER-BRAZING; REDUCING COUPLING, BUSHING, AND ADAPTER, PIPE This
More informationParts Manual. Models 521 SSE (621502X37NA) 521 SSR (621503X37NA) &
Parts Manual Models 521 SSE (621502X37NA) 521 SSR (621503X37NA) 1740273 & 1740275 11.2006 Table Of Contents PRODUCT COMPONENTS PAGES Handle Group... 4 Engine Group... 6 Frame Group... 8 Auger Housing
More informationDTFACT 16 C IN PAVEMENT LIGHT FIXTURE TESTING AND ANALYSIS FINAL SUMMARY PRESENTATION
DTFACT 16 C 00047 IN PAVEMENT LIGHT FIXTURE TESTING AND ANALYSIS FINAL SUMMARY PRESENTATION IESALC Fall Technology Meeting Government Contacts Subcommittee Dallas, TX October 23, 2017 Jeremy N. Downs,
More informationDETAIL SPECIFICATION SHEET
INCH-POUND MIL-DTL-24308/33 1 April 2015 DETAIL SPECIFICATION SHEET CONNECTORS, ELECTRIC, RECTANGULAR, MINIATURE, COMBINATION INSERT ARRANGEMENT, PLUG, PIN CONTACTS, SHELL SIZE 3, SIZE 20 SIGNAL CONTACTS
More information2010+ Dodge Ram 2500/3500 Front Bumper Install Instructions
2010+ Dodge Ram 2500/3500 Front Bumper Install Instructions Warning! Read the instructions completely before beginning the installation. Before tightening bolts, drilling or cutting where required, check
More informationDETAIL SPECIFICATION SHEET
INCH-POUND MIL-DTL-24308/30 1 April 2015 DETAIL SPECIFICATION SHEET CONNECTORS, ELECTRIC, RECTANGULAR, MINIATURE, COMBINATION INSERT ARRANGEMENT, RECEPTACLE, SOCKET CONTACTS, SHELL SIZE 1, SIZE 20 SIGNAL
More informationQuarter-Turn Fasteners
Solutions Inc. SU-2300 Line Quarter-Turn Fasteners MIL-F-5591C * Approved The SU-2300 Line fasteners are designed for aircraft use and are used on external access panels and internal equipment. They are
More informationInstallation Instructions: Bumper (Part # SB76850) XJ Jeep Cherokee XRC Rear Bumper
NOTE: Carefully read entire instructions thoroughly before attempting to install this part. Parts Included Qty 93-7789 XJ XRC 1 93-7807 Bumper Mount Bracket: Drvr 1 93-7811 Bumper Mount Bracket: Pass 1
More informationFristam Data Sheets FRISTAM PUMPS FREEFAX:
Freephone lines are open between 8.00am and 5.30pm Monday to Friday FREEFAX: 0800 801404 FRISTAM PUMPS Moody Direct have been authorised as an approved stockist of Fristam Pump parts and components. A
More informationChapter 7. Fasteners
Chapter 7 Fasteners LEARNING OBJECTIVES After studying this chapter, students will be able to: Identify several types of fasteners. Explain why inch-based fasteners are not interchangeable with metric-based
More information3400 E. WALNUT STREET COLMAR, PA DORMAN / ROCKFORD
WEATHERLY #770 D-2013-A JUNE 2013 SUPERSEDES R-2009-F APR. 2009 2013 DORMAN / ROCKFORD 1-800-523-2492 Corporate Office & Customer Service www.dormanproducts.com 2013 Dorman Products, Inc. No reproduction
More informationSupport Stands & Conveyor Mountings. Parts, Assembly & Maintenance Manual. Steel Support Stand. Aluminum Support Stand Rev.
Support Stands & Conveyor Mountings Parts, Assembly & Maintenance Manual Aluminum Support Stand Steel Support Stand -00 Rev. B Table of Contents Safe Practices............................... Foreword....................................
More informationPARTS LIST WRANGLER 2730 DB & 3330 DB
PARTS LIST WRANGLER 2730 DB & 3330 DB RECOVERY TANK ASSEMBLY ITEM PART NO. DESCRIPTION QTY 101 3392051 TOP PLATE 1 102 9120500 10-24 X 3/8 TRUSS HEAD PHILLIPS SCREW - PACK OF 10 8 103 3392061 GASKET, TOP
More informationHYDRAULIC CONTROL DETAILS PARTS LIST
Always give model number, serial number and part number when ordering repair parts. HYDRAULIC CONTROL DETAILS PARTS LIST REF NO. PART NUMBER DESCRIPTION 1 101939 Hydraulic Tank 2 101940 Hydraulic Tank
More informationInstallation Instructions
Installation Instructions Challengers 36 in. (914 mm) Wide Glide Slide Installation Preparation Recommended Crew:... Two (2) adults Installation Time:... 1.5 man-hours Concrete Required:... 0.03 cubic
More informationBig Block Installation Manual For Systems without A/C
Big Block Installation Manual For Systems without A/C Billet Specialties, Inc. 500 Shawmut Ave. La Grange, IL 60526 Tech Line (708) 588-0505 Fax (708) 588-7181 Hardware List For Chevrolet Big Block Tru
More informationHex Bolts & Hex Screws DIN 931/ISO4014 & DIN 933/ISO4017
Hex Bolts & Hex Screws DIN 931/ISO4014 & DIN 933/ISO4017 Diameter: M27 to M52 up to 500 MM in Length Diameter: M16 to M42 up to 300 MM in Length up to 300 MM in Length up to 300 MM in Length up to 300
More informationFRAME. Pull Type Rigid Frame, Lift Rotate INNER HITCH
Pull Type Rigid Frame, Lift Rotate INNER HITCH The hitch length can be adjusted in 15" increments to accommodate the tractor tire options (single or dual tires) being used and attachments installed on
More informationInformation about norm changes
Information about norm changes In line of the international adjustments of several norms following have been changed: OLD NEW NEW NEW Article DIN DIN-ISO DIN-EN-ISO DIN-EN Taper pins unhardened (1) 22339
More informationPrecise. Proven. Dedicated.
Precise. Proven. Dedicated. Right Precision aerospace components manufactured to the highest quality. Major OEMs, the Federal Government, and industry distributors rely on our 70+ years of USA-based manufacturing
More informationSection D ACCELERATOR
Section D ACCELERATOR December 2009 1D Index 1. 47-021476-001 Ball Accelerator Box 2. 11-051019-001 Hex Hd. Cap Screw (10 mm x 25 mm) 3. 11-052018-001 Flat Washer (10.5 mm) 4. 47-021249-004 Ball Cushion
More informationASSEMBLY AND ADJUSTMENT
EDGE MONITOR ARM EDGE Rev A 2/17 Model EDGE-SLV Model EDGE-BLK Model EDGE-WHT ASSEMBLY AND ADJUSTMENT EDGE MONITOR ARM PARTS AND TOOLS PLEASE REVIEW these instructions before beginning the assembly and
More informationELSTON. Gopher Getters. Parts List for GA-400 and GA-500 ELSTON MANUFACTURING INC. Please Contact Us for Parts and Service:
ELSTON Gopher Getters Parts List for GA-00 and GA-00 Another Quality Product of: Please Contact Us for Parts and Service: ELSTON MANUFACTURING INC. 70 N Weber Sioux Falls, SD 70 www.elstonmfg.com -800-8-8
More informationFasteners. Massachusetts Institute of Technology Kavli Institute for Astrophysics and Space Research (MKI) Dwg. No Revision D March 24, 2015
Rev. ECO Description Author Approved Date A Initial Release B. Klatt R. Goeke 04/16/91 B General Revision 01/20/06 C General Editorial Update B. Klatt M. Bautz 07/16/14 D Incorporate GSFC 541- PG- 8072.1.2Rev
More information01 FASTENERS JULY FASTENERS 1
01 FASTENERS 4 Bolts 22 Socket Screws 30 Nuts 39 Washers 53 Screws 72 Threaded Rods & Studs 73 Rivets, Rivnuts & Accessories 82 Retaining Rings 84 Pins, Links, & Sleeves 91 Key Stock & Assortments 90 Anchors
More informationMX8 SERIES 6-1/4 HANDRAIL W/ VINYL HANDGRIP
6-1/4 HANDRAIL W/ VINYL HANDGRIP TYPICAL ASSEMBLY 5 2 BUTT JOINT 12 10 9 1 8 11 6 3 7 4 BUTT JOINT COMPONENT LIST 1 LEFT RETURN 7 UPPER IMPACT ABSORBER 2 RIGHT RETURN 8 LOWER IMPACT ABSORBER 3 OUTSIDE
More informationAustin Standing Seam Awning Assembly and Installation Instructions. Assembly Instructions
Austin Standing Seam Awning Assembly and Installation Instructions Be sure to use safety glasses when assembling and installing the awning. Some metal parts may have sharp edges. Use work gloves to handle
More informationDETAIL SPECIFICATION SHEET CONNECTORS, PLUG, ELECTRICAL, CRIMP TYPE, CABLE-CONNECTING, BAYONET COUPLING, SERIES 1, CLASSES E, F AND P
INCH POUND MS3121E 19 October 2017 SUPERSEDING MS3121E 15 January 2015 DETAIL SPECIFICATION SHEET CONNECTORS, PLUG, ELECTRICAL, CRIMP TYPE, CABLE-CONNECTING, BAYONET COUPLING, SERIES 1, CLASSES E, F AND
More informationDETAIL SPECIFICATION SHEET CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: KEYING ACCESSORIES
INCH-POUND MIL-DTL-55302/31L 20 July 2007 SUPERSEDING MIL-DTL-55302/31K 9 January 2004 DETAIL SPECIFICATION SHEET CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: KEYING ACCESSORIES This specification
More informationChapter Tests and Problems
Chapter Tests and Problems Chapter 11 Fasteners and Springs Test INSTRUCTIONS Answer the questions with short, complete statements or drawings as needed. QUESTIONS Define the screw thread terms given in
More informationSECTION 9: PARTS. Table. Spiral Cutterhead For Model G0452Z Cutterhead For Models G0452/P Model G0452/P/Z (Mfg.
SECTION 9: PARTS Table 17 18 19 87 86 21 262-3 262-1 262-2 27 28 29 30 22 23 24 35 36 37 38 262 25 26 2 13 Cutterhead For Models G0452/P 10 45 12 13 7 8 9 50A 6 11 31 14 15 16 12 13 81 82 83 84 32 85 33
More informationPlease read BOTH these Installation Instructions and the General Instructions prior to installing or operating this equipment.
Attachment Tab Height: 19-1/2 Attachment Tab Width: 19 Serial Number Please read BOTH these and the General Instructions prior to installing or operating this equipment. 1. Blue Ox towing products and
More informationAssembly, Operating, Safety and Parts Manual
Current Tools Model 280 Bending Table for use with Greenlee Model 885, 884, 880, and 777 and Ensley Model E-125 Conduit Benders * Assembly, Operating, Safety and Parts Manual 07/09 REV. 2 Read and understand
More informationPHONE: FAX:
Models: SB-12600, SB-12600C, SB-12601, SB-12680, SB-126801, SB-12682, SB-12683, SB-12720, SB-12720C, SB-12760 1... BI-32018... Paper Bag, type SUB-3, 3 pack 2... BI-5554431... Handle Tube, w/ grip 2...
More informationDETAIL SPECIFICATION SHEET
INCH-POUND 14 November 2013 SUPERSEDING MIL-DTL-28840/14F 23 October 2009 DETAIL SPECIFICATION SHEET CONNECTORS, ELECTRICAL, CIRCULAR, THREADED, HIGH SHOCK, HIGH DENSITY, SHIPBOARD, CRIMP CONTACTS, RECEPTACLE,
More informationStainless Steel CNC Machined Parts Turned Components :
STAINLESS STEEL CNC MACHINED PARTS TURNED COMPONENTS Stainless Steel CNC Machined Parts Turned Components : We create metal turned parts with virtually any material including aluminum, brass, cast iron,
More informationSTRAIGHT HANDLEBAR KIT
STRAIGHT HANDLEBAR KIT P/N 2881973 APPLICATION All straight bar applications, excluding 550 Indy and Voyageur models BEFORE YOU BEGIN Read these instructions and check to be sure all parts and tools are
More informationFaçade Solution. Produces façade & cassette solutions
Façade Solution Façade Solution Produces façade & cassette solutions The company produces facade solutions using its cutting edge Qatari manufacturing facility. All facades are manufactured & delivered
More informationNX8 SERIES 6-1/4 HANDRAIL W/ VINYL HANDGRIP
6-1/4 HANDRAIL W/ VINYL HANDGRIP TYPICAL ASSEMBLY 5 2 BUTT JOINT 12 10 9 1 8 11 6 3 7 4 BUTT JOINT COMPONENT LIST 1 LEFT RETURN 7 UPPER IMPACT ABSORBER 2 RIGHT RETURN 8 LOWER IMPACT ABSORBER 3 OUTSIDE
More informationStandard Specification for High-Strength Bolts for Structural Steel Joints [Metric] 1
Designation: A 325M 00 METRIC An American National Standard Standard Specification for High-Strength Bolts for Structural Steel Joints [Metric] 1 This standard is issued under the fixed designation A 325M;
More informationSales Aids Sec. 26 )HE. 2019
Sec. 26. 2019 Display Posters Wall 1EP Top Selling Body Shop Fasteners Displayed on a 28 x 40 English Wall Poster 1SP Top Selling Body Shop Fasteners Displayed on a 28 x 40 Spanish Wall Poster 2 Display
More informationMETRIC BOlTS. Size Grade Torque 8mm ft/lbs. 10mm ft/lbs. 12mm ft/lbs. 14mm ft/lbs. 16mm ft/lbs.
8/16 HJ31005,Rev 7 BOlT TORQUE SPECIfICATIONS METRIC BOlTS STANDARD BOlTS Size Grade Torque 5/16 5 18 ft/lbs. 3/8 5 30 ft/lbs. 7/16 5 50 ft/lbs. 1/2 5 75 ft/lbs. 5/8 5 150 ft/lbs. 3/4 5 290 ft/lbs. Size
More informationTABLE OF CONTENTS SECTION SECTION TITLE CONTENTS DESCRIPTION. Stamping 12/17/07
TABLE OF CONTENTS 12/17/07 SECTION SECTION TITLE CONTENTS DESCRIPTION Logsheet Introduction Listing of contents of each page of standards with click-on access to each page Copyright Notice, Foreword, Metrication
More informationUNIQUE STRUX DESIGN PROVIDES EXCEPTIONAL PERFORMANCE
UNIQUE STRUX DESIGN PROVIDES EXCEPTIONAL PERFORMANCE Our high-performance STRUX fasteners offer a stronger and more reliable assembly alternative to traditional clinch and weld studs. Along with stud applications,
More informationExtensive cable management on a footprint that fits on a 24-inch floor tile.
RM945A-R2 Elite Rack Manager Extensive cable management on a footprint that fits on a 24-inch floor tile. Holds up to 1000 pounds. Customer Support Information Order toll-free in the U.S.: Call 877-877-BBOX
More informationPH03 Comfort XL Front Assembly Replacement Instructions
PH03 Comfort XL Front Assembly Replacement Instructions POLYJOHN USA PolyJohn Enterprises Corp 2500 Gaspar Ave. Whiting, IN 46394 Phone: 800-292-1305 Fax: 219-659-0625 www.polyjohn.com info@polyjohn.com
More information670 SCREWED FIX-IT KITS. Page WOOD SCREWS DOWEL PINS DOWELS STUDDING. Page Pages GROUP GROUP 651 EXTRACTOR GROUP 635 GROUP 650
Page...........556-559 635 WOOD SCREWS 650 DOWEL PINS 651 EXTRACTOR DOWELS 670 SCREWED STUDDING Page.......................560 Page.......................561 Page.......................561 Pages......................561
More informationNumber Wheeler P/N Description Set Rex P/N Notes Base 1 J Support, Right 1 J Support, Left 1 J Nut (M8)
1 603500 Base 1 J001 2 603501 Support, Right 1 J002 3 603502 Support, Left 1 J003 4 600328 Nut (M8) 4 5 600130 Spring Washer (8mm) 4 6 600344 Roll Pin (M6x30) 4 7 600129 Socket Hd Cap Screw (M8x25) 4 8
More informationEvaluation of In-Pavement Light Fixture Designs and Performance
Evaluation of In-Pavement Light Fixture Designs and Performance Presented to: IES ALC Fall Technology Meeting By: Joseph Breen Date: Background In-Pavement Light Fixture Assemblies Utilize a Circle of
More informationHANDLEBAR KIT P/N APPLICATION BEFORE YOU BEGIN KIT CONTENTS TOOLS REQUIRED. Instr Rev Page 1 of 6
HANDLEBAR KIT P/N 2881993 APPLICATION All straight bar applications, excluding 550 Indy and Voyageur models BEFORE YOU BEGIN Read these instructions and check to be sure all parts and tools are accounted
More informationDelivery Programme _Leveringsprogramma2013_Kobout engels.indd :00
Delivery Programme 291068_Leveringsprogramma2013_Kobout engels.indd 1 01-02-13 16:00 Delivery Programme With more than 25,000 different stock articles, Kobout is your partner for fasteners. The delivery
More informationDETAIL SPECIFICATION SHEET
INCH-POUND MIL-DTL-83723/82E 25 January 2018 SUPERSEDING MIL-DTL-83723/82E 19 August 2009 DETAIL SPECIFICATION SHEET CONNECTORS, ELECTRICAL, CIRCULAR, ENVIRONMENT RESISTING, RECEPTACLE, FLANGE MOUNT, THREADED
More informationWelcome to Srishaa Machined Fasteners Pvt Ltd. Our Mission. Our Vision. Our Quality Policy
Welcome to Srishaa Machined Fasteners Pvt Ltd. Our Mission We at Srishaa Machined Fasteners, are committed to deliver products that meet and exceed your requirements and expectations Our Vision We aim
More informationMANUFACTURING INC. 706 N
ELSTON Gopher Getters Parts List for GA-00 & GA-00 Please Contact Us for Parts and Service: Another Quality Product of: ELSTON MANUFACTURING INC. 70 N Weber Sioux Falls, SD 70 www.elstonmfg.com -800-8-8
More informationSapper XYZ 30 Monitor Arm Installation Instructions
12/01/2017 Sapper XYZ 30 Monitor rm Installation Instructions at 60% from original 59065 Step 1: ttach Mount to Work Surface Two-Piece Table lamp and eep Table lamp llen wrenches (in inches): lamp lower
More informationEDGE2 DUAL MONITOR ARM
EDGE2 DUAL MONITOR ARM EDGE2 Rev A 2/17 Model EDGE2-SLV Model EDGE2-BLK Model EDGE2-WHT ASSEMBLY AND ADJUSTMENT EDGE2 DUAL MONITOR ARM PARTS AND TOOLS PLEASE REVIEW these instructions before beginning
More informationWARNING. Baseplates. Serial Number
Baseplates Serial Number Attachment Tab Height: 13.5 Attachment Tab Width: 24 Please read BOTH these Installation Instructions and the General Towing Instructions before attempting to install or operate
More informationHardware List For Small Block Tru Trac Serpentine System without A/C
x4 Hardware List For Small Block Tru Trac Serpentine System without A/C x1 Short Spacer Nut 8mm-1.25 x 25mm 12pt. Cap Screw x3 Long Spacer Nut x1 3/8-16 x 3/4 12pt. Cap Screw x1 8mm-1.25 x 25mm Flat Head
More informationFASTENERS. Fasteners. Steel fasteners. Hexagon socket screws. Steel fasteners MC6S
Steel fasteners 21 FASTENERS Steel fasteners Hexagon socket s MC6S Hexagon socket head cap Din 912. (ISO 4762). * Fully threaded. 100 101 102 12.9 Uncoated 8.8 Uncoated 8.8 BZP Blanc Zink plated Dim mm
More information