PTICALTARGETING SPECIALTIES

Transcription

1 PTICALTARGETING SPECIALTIES FOUNDATION TARGET INSERT FTI CONSTRUCTION BALL / TARGET PAD CBTP TARGET PAD TRP 3 1/2-8 TO 5/8-11 INSTRUMENT ADAPTOR 4 MAGNETIC BASE TARGET HOLDER ADAPTOR MBTHA CONSTRUCTION BALL CB INDEX LASER TRACER - BOEING HEADER TARGET LT - BHT DOUBLE VECTOR TARGET PIPE MOUNT DVTPM ECONOMY RING E-RING

2 SECTION INDEX MISCELLANEOUS MISCELLANEOUS INDEX

3 FTI Mounted in concrete flooring/foundations, etc., to allow for a permanent reference. FTI FTI brass FTI ORDERING INFORMATION FTI FOUNDATION TARGET INSERT FTI FEATURES MEDIUM NURLED BRASS.875 optical target (reference not included).25 slip fit removable brass cap 10/32 x 1" flat head socket head cap screw 1.25 brass.2500 hole air hole sealed plug 10/32 tap medium knurl 1 P F Rocky Grove / P.O.Box 540 Cedar Hill, Missouri

4 CBTP Uses /.0000 hole that is perpendicular to the top surface which allows interchangeability with standard construction ball, standard optical targeting, or larger diameter items such as Laser Tracker Sphere Mounts. CBTP CBTP CBTP 1144 steel, black oxide finish CBTP ORDERING INFORMATION CONSTRUCTION BALL / TARGET PAD CBTP FEATURES 1144 STEEL, BLAC OXIDE FINISH (standard) 15/64" drill thru (2) places clearance hole and counterbore for 1/4" socket head cap screws (2 places) / hole 10/32 tap thru (3) places 90 c/l of.2500 hole perpendicular to top surface within +/ per inch.500 +/ SM & R are registered trademarks of Hubbs Machine & Mfg. Inc. MISCELLANEOUS

5 TRP Low-cost, efficient way for establishing a permanent, critical.2500 diameter target hole along with a flat and perpendicular reference upper surface. Epoxy, hot glue, or tack weld in place. Is used to adapt an instrument stand with a 3 1/2-8 external thread over to a 5/8-11 external thread. Works well with the AT401 or equipment with a 5/8-11 internal mounting thread TRP TRP TRP (OPTIONS) 1018 steel or (ss) (OPTIONS) Aluminum Black Anodized TRP ORDERING INFORMATION ORDERING INFORMATION TARGET PAD / hole 90 c/l of.2500 hole perpendicular to top surface within +/ per inch TRP FEATURES 1018 STEEL, BLAC OXIDE FINISH (standard).500 +/-.005 chamfer side goes down to facilitate hot glue or tack welding STAINLESS STEEL OPTION (for more corrosive environments) 3 1/2-8 TO 5/8-11 INSTRUMENT ADAPTER /8"-11 external thread 3 1/2"-8 internal thread FEATURES ALUMINUM, BLAC ANODIZED FINISH (standard) P F Rocky Grove / P.O.Box 540 Cedar Hill, Missouri

6 MBTHA Designed to locate the center of a scribed cross-hair using tick marks. MBTHA MBTHA 1144 steel, black oxide finish MBTHA ORDERING INFORMATION MBTHA CB Intended to be used when standard, off the shelf designs, such as.3125 and.5000 offsets with.2500 shanks, cannot be used. CB CB CB H TO CENTERLINE OF SPHERE A SHAN DIAMETER BALL DIAMETER CB ORDERING INFORMATION chrome steel ball MAGNETIC BASE TARGET HOLDER ADAPTOR / / /32 nylon set screw magnet white tick marks (4 places, equally spaced) MBTHA FEATURES 1144 STEEL, BLAC OXIDE FINISH (standard) / on c/l of.7500 diameter within +/ CONSTRUCTION BALL / ball diameter "A" "H" +/ hardened chrome steel ball, shiny finish 1144 steel base and shank CB FEATURES HARDENED CHROME STEEL BALL 4 SM & R are registered trademarks of Hubbs Machine & Mfg. Inc. MISCELLANEOUS

7 LT - BHT LT - BHT ORDERING INFORMATION LT-BHT LT-BHT LT-BHT 1144 steel, black oxide finish LASER TRACER - BOEING HEADER TARGET sphere reference magnet (3) point nest on c/l of diameter within +/ / to c/l of sphere reference undercut LT - BHT FEATURES 1144 STEEL OXIDE FINISH (standard) 5 P F Rocky Grove / P.O.Box 540 Cedar Hill, Missouri

8 DVTPM Designed to find centerline of various diameters. DVTPM LEG LENGTH DVTPM 2 INCH or 4 INCH aluminum DVTPM ORDERING INFORMATION DVTPM DOUBLE VECTOR TARGET PIPE MOUNT DVTPM - 2 DVTPM /-.002 (known distance from locating datum intersecting to target locating surface) 6/32 nylon set screw 2" or 4".2500 hole, slip fit for double vector target or a hidden point bar, on c/l of "V" DVTPM FEATURES ALUMINUM BLAC, ANODIZED COATING 1/4" dowel pins to hold rubber bands (2 places) pipe outside diameter reference 45 6 SM & R are registered trademarks of Hubbs Machine & Mfg. Inc. MISCELLANEOUS

9 E - RING Used to adapt a Leica Laser Tracker to an instrument stand. E - RING ORDERING INFORMATION E-RING E-RING aluminum E-RING ECONOMY RING 8.5 outside diameter E - RING FEATURES ALUMINUM HARDCOAT BLAC ANODIZED FINISH.87 7 scale- 1:2 P F Rocky Grove / P.O.Box 540 Cedar Hill, Missouri

10 PTICALTARGETING SPECIALTIES MISCELLANEOUS END