PARTS BROCHURE VOL. 2
|
|
- Kristopher Taylor
- 5 years ago
- Views:
Transcription
1 Packaging Solutions PARTS BROCHURE VOL. 2
2 TABLE OF CONTENTS Strap Assembly... 1 Strap Assembly with Dovetail... 1 Cross Beam 30 mm Glue Clamp... 1 Knuckle Assembly... 1 Knuckle Assembly With Handle... 1 Roller Set... 2 Roller Set Spare Parts... 2 Replacement Bearings... 2 Flat Socket Head... 2 Tap Screw Cap... 2 Spring Washer... 2 Spring... 2 Bogie/Tie Rods... 3 Bogie Kit... 3 Knurled Steel Screws... 3 Support Rods... 4 Pin Wrench... 4 Ejection Roller For Handy Pack... 4 V Clamp... 4 Guide U Bar... 5 Brass-Tip Screw... 5 Dugmrulli Drive Sprocket... 5 Packaging Solutions Parts Brochure Vol. 2 published August 2016 by Olympic Tool Company CONTACT US Online Solutions for Specialized Folding 5A Helmly Avenue Bayville, NJ Toll free: Fax: sales@olympic-tool.com Director of Sales Andrew McTague Cell: amctague@olympic-tool.com President Edmund Cassella ecassella@olympic-tool.com
3 SUPPORT RODS STRAP ASSEMBLY STRAP ASSEMBLY WITH DOVETAIL All size support rods made to OEM specs. Black Oxide coating to prevent rust and wear. A universal fit for all folding gluing lines. Made of high quality steel and zinc coated, this part is made to last. Same design and strength as the OEM without the high cost! SUPPORT ROD L 300 mm OEM # BSA JI OTC-5080-L300 SUPPORT ROD L 550 mm OEM # BSA P OTC-5080-L550 SUPPORT ROD WITH V CLAMP ASSEMBLY L 180 mm SUPPORT ROD WITH V CLAMP ASSEMBLY L 350 mm OEM # BSA BP OTC-5080-L180-ASSY OEM # BSA BS OTC-5080-L350-ASSY CROSS BEAM 30 MM GLUE CLAMP ADDITIONAL SUPPORT ROD WITH V CLAMP ASSEMBLY SIZES AVAILABLE: OEM # BSA BM OTC-5080-L250-ASSY L 250 mm L 300 mm OEM # BSA BR OTC-5080-L300-ASSY Made of high quality steel and zinc coated. OEM# OTC-5011-ASSY PIN WRENCH EJECTION ROLLER FOR HANDY PACK Made of stainless steel and heat treated for superior strength. Made of steel and polyurethane for an exact match to the OEM at half the cost! SAVE 25% OR MORE Please call for pricing. Sales: Office: KNUCKLE ASSEMBLY Fits all folding gluing lines. Knuckles are made of high quality steel and zinc coated. OEM# OTC KNUCKLE ASSEMBLY WITH HANDLE OEM# BSA OTC MM OEM# Expertfold OEM# BSA GA OTC-5015-ASSY OEM# XJ OTC-5010-ASSY Same quality as our top selling design with the ease and comfort of an adjustable handle. OTC V CLAMP OTC H For positioning rods and supports. Steel V clamps are manufactured for strength and durability! OEM# BSA OTC
4 ROLLER SET ROLLER SET SPARE PARTS Made from ALUMINUM instead of composite and offering removable bearings, this roller set gives the operator superior strength and the ease of changing out worn bearings without removing the roller assembly. THE ROLLER SET THA PAYS FO T R ITSELF! BOGIE/TIE RODS BOGIE KIT Aluminum construction and quick change bearing makes this part not only better but more economical. Comes with replacement composite wheel and quality bearing. Vision Corregated Lines OEM# OTC-5100-L-ASSY OEM# OTC-5100-R-ASSY REPLACEMENT BEARINGS OTC B OTC Alpina/Masterfold/Expertfold/Mistral OEM# OTC-5200-L-ASSY OEM# OTC-5200-R-ASSY Alpina/Masterfold OEM# OTC ASSY FLAT SOCKET HEAD TAP SCREW CAP KNURLED STEEL SCREWS Made of alloy steel and zinc coated. OTC CS M8 x 16mm OEM# BSA OTC x16mm M8x20mm OEM# BSA OTC x20mm M8x25mm OEM# BSA OTC x25mm M8x30mm OEM# BSA OTC x30mm SPRING WASHER OTC SW Fuego/Mistral/Visionfold/Expertfold OEM# OTC ASSY 2 SPRING OTC S 3
5 ROLLER SET ROLLER SET SPARE PARTS Made from ALUMINUM instead of composite and offering removable bearings, this roller set gives the operator superior strength and the ease of changing out worn bearings without removing the roller assembly. THE ROLLER SET THA PAYS FO T R ITSELF! BOGIE/TIE RODS BOGIE KIT Aluminum construction and quick change bearing makes this part not only better but more economical. Comes with replacement composite wheel and quality bearing. Vision Corregated Lines OEM# OTC-5100-L-ASSY OEM# OTC-5100-R-ASSY REPLACEMENT BEARINGS OTC B OTC Alpina/Masterfold/Expertfold/Mistral OEM# OTC-5200-L-ASSY OEM# OTC-5200-R-ASSY Alpina/Masterfold OEM# OTC ASSY FLAT SOCKET HEAD TAP SCREW CAP KNURLED STEEL SCREWS Made of alloy steel and zinc coated. OTC CS M8 x 16mm OEM# BSA OTC x16mm M8x20mm OEM# BSA OTC x20mm M8x25mm OEM# BSA OTC x25mm M8x30mm OEM# BSA OTC x30mm SPRING WASHER OTC SW Fuego/Mistral/Visionfold/Expertfold OEM# OTC ASSY 2 SPRING OTC S 3
6 SUPPORT RODS STRAP ASSEMBLY STRAP ASSEMBLY WITH DOVETAIL All size support rods made to OEM specs. Black Oxide coating to prevent rust and wear. A universal fit for all folding gluing lines. Made of high quality steel and zinc coated, this part is made to last. Same design and strength as the OEM without the high cost! SUPPORT ROD L 300 mm OEM # BSA JI OTC-5080-L300 SUPPORT ROD L 550 mm OEM # BSA P OTC-5080-L550 SUPPORT ROD WITH V CLAMP ASSEMBLY L 180 mm SUPPORT ROD WITH V CLAMP ASSEMBLY L 350 mm OEM # BSA BP OTC-5080-L180-ASSY OEM # BSA BS OTC-5080-L350-ASSY CROSS BEAM 30 MM GLUE CLAMP ADDITIONAL SUPPORT ROD WITH V CLAMP ASSEMBLY SIZES AVAILABLE: OEM # BSA BM OTC-5080-L250-ASSY L 250 mm L 300 mm OEM # BSA BR OTC-5080-L300-ASSY Made of high quality steel and zinc coated. OEM# OTC-5011-ASSY PIN WRENCH EJECTION ROLLER FOR HANDY PACK Made of stainless steel and heat treated for superior strength. Made of steel and polyurethane for an exact match to the OEM at half the cost! SAVE 25% OR MORE Please call for pricing. Sales: Office: KNUCKLE ASSEMBLY Fits all folding gluing lines. Knuckles are made of high quality steel and zinc coated. OEM# OTC KNUCKLE ASSEMBLY WITH HANDLE OEM# BSA OTC MM OEM# Expertfold OEM# BSA GA OTC-5015-ASSY OEM# XJ OTC-5010-ASSY Same quality as our top selling design with the ease and comfort of an adjustable handle. OTC V CLAMP OTC H For positioning rods and supports. Steel V clamps are manufactured for strength and durability! OEM# BSA OTC
7 GUIDE U BAR Made of high quality alloy steel, these guide bars universally fit all folder- gluers. GUIDE-LARGE U BAR OEM# BSA SO OTC-5060-LG-ASSY BRASS-TIP SCREW High quality alloy steel, to prevent damage when tightening. Brass tip protects guide bars from kinks and burrs. GUIDE-SMALL U BAR OEM# BSA GE OTC-5060-SM-ASSY OEM# BSA OTC x8mm DUGMRULLI DRIVE SPROCKET Tired of the OEM nylon sprocket wearing down? Switch to Olympic Tool s aluminum version. Twice as strong and more affordable. CartonPackII OTC
8 Packaging Solutions PARTS BROCHURE VOL. 2 5A Helmly Avenue Bayville, NJ 08721
PARTS BROCHURE VOL. 3
Packaging Solutions PARTS BROCHURE VOL. 3 TABLE OF CONTENTS Strap Assembly... 1 Strap Assembly with Dovetail... 1 Strap Assembly 85 mm... 1 Cross Beam 30 mm Glue Clamp... 1 Knuckle Assembly... 1 Knuckle
More informationAutomatic Reversible Cam Action Workholding Assemblies
Automatic Reversible Cam Action Workholding Assemblies AUTOMATICALLY RELEASES AND RETRACTS CLAMP STRAP Reversible Cam Action Workholding Assembly Handle Lever is adjustable throughout 0º. AUTOMATIC REVERSIBLE
More informationMAG-CONV Basic, 48, 48R & Midline Front Mount
Parts Required: Tools Used: Mag Wheels Brakes Brake Rods Mounting Bracket Anti Tippers 7/16" Wrench Screw Driver Rubber Mallet 5/8 Wrench 5mm Allen Wrench Step Execution Figures 1 Remove front 5" total
More informationPliers. Pliers PLIERS
Pliers Pliers PILERS Long Nose Pliers With Side Cutter Comfortable two-component handles combine durability with a secure non-slip grip. High-leverage joint placement increases leverage to reduce the cutting
More informationSpecial Thumb Screw Order Form
Special Thumb Screw Order Form QUOTE FOR: ORDER FOR: Name: Company: Address: QUANTITY: Phone #: City: State: Zip: Email Address: FILL IN YOUR DIMENSIONS write directly over light blue type* write clearly
More informationLegacy DaVinci Pen Kit
Description: The DaVinci model is a single tube pen kit that uses a 3/8 tube and is a great starter kit for those new to pen turning. They are look similar to our Viceroy kit with a more intricate design.
More informationCS Unitec, Inc. 22 Harbor Avenue, Norwalk, CT Phone: Toll-free:
CS Unitec, Inc. 22 Harbor Avenue, Norwalk, CT 06850 Phone: 203-853-9522 Toll-free: 800-700-5919 Email: info@csunitec.com CS Unitec, Inc. 22 Harbor Avenue, Norwalk, CT 06850 Phone: 203-853-9522 Toll-free:
More informationPremium Power Tool Accessories Proudly Made in the USA
Premium Power Tool Accessories Proudly Made Table of Contents Make it Snappy Tools Premium Power Tool Accessories Proudly Made About Us Founded in a basement machine shop in Minnesota in 1962, we are a
More informationGAGING AND INSPECTION
Fixture Plates...75 Fixturing Towers...76 CMM Fixturing Kits... 77-78 Clamping Components... 79-80 Standoffs and Locators... 81-82 Magnetic Components... 83-84 Height Adjustment...84 Positioners...85 Clamp
More informationLegacy Polaris Pen Kit
Description: The Polaris model is a single tube pen kit that uses a 3/8 tube and is a great starter kit for those new to pen turning. They look similar to our Viceroy kit but the body tube is longer which
More informationMECHANICS TOOLS. Back
MECHANICS TOOLS Back FULLER AND FULLER PRO SLIP JOINTS Designed by professionals for professionals, FULLER PRO Slip Joint and Groove Joint Pliers offer a lifetime of performance we guarantee it. The FULLER
More informationParts Catalog MIXERS
Parts Catalog MIXERS MODELS: SP0 & SPC0 SP0-3-2 IMPORTANT! TO EXPEDITE SHIPMENT OF PARTS, ALWAYS SPECIFY MODEL, REV, PART NUMBER, AND SERIAL NUMBER OF MIXER. GLOBE FOOD EQUIPMENT COMPANY 225 East River
More informationInstallation Tools. Pipe Cutters for steel and cast iron pipes 598. Deburring Reamer / for stainless steel pipes 600. for copper pipes 602
596 597 Installation Tools Pipe Cutters for steel and cast iron pipes 598 Pipe Cutters / Pipe Deburring Reamer for stainless steel pipes 600 Pipe Cutters / Pipe Deburring Reamer / Calibrating Tool for
More informationLegacy Hex Pencil Kit
Description: The Hex pencil is a step-up kit, with similar features to a Slimline Pro Pencil. It has a click mechanism instead of a twist. It uses an 3/8 tube and 2MM pencil lead. It has a heavier feel
More informationParts Catalog MIXERS
Parts Catalog MIXERS MODEL: SP60 & SPC60 SP60 0-2-2 IMPORTANT! TO EXPEDITE SHIPMENT OF PARTS, ALWAYS SPECIFY MODEL, REV, PART NUMBER, AND SERIAL NUMBER OF MIXER. GLOBE FOOD EQUIPMENT COMPANY 225 East River
More informationCANADA S CUTTING EDGE
CANADA S CUTTING EDGE ADVANCED CONTROL SYSTEMS CORP. Paisley Lane, Stouffville, Ontario L4A 7X4 Tel: 905-64-056 Fax: -866-45-574 www.acspowersports.ca 90 CARBIDES ACS LIGHTI ACS SPORTI ACS MAXI Less steering
More informationLegacy Upgraded Junior Gentlemen s Pen Kit
Description: The Upgraded Junior Gentlemen s model is a classic style pen which is easy to turn and uses a Roller Ball Refill which is highly desirable among pen enthusiasts The Upgraded Junior Gentlemen
More informationHeavy Duty Pipe Wrench
Heavy Duty Pipe Wrench High-tensile ductile iron handle and hardened tool-steel parts. Designed to withstand heavy demands. Easy-spin adjusting nut is heat-treated for durability. Drop-forged jaw is heat-treated
More informationINSTALLATION GUIDE FOR SR-CANOPY KIT SNOWRATOR
2018 INSTALLATION GUIDE FOR SR-CANOPY KIT SNOWRATOR AES L. T. RICH PRODUCTS 1/31/2018 Contents SR-CANOPY KIT INSTALLATION REV 1 1.0 SHIPPING CONTENTS... 2 2.0 IMPORTANT INFORMATION... 3 2.1 PURPOSE...
More informationPRO Brake Operating Instructions
PRO Brake Operating Instructions Tapco Products Company P R O 9 a n d P R O B r a k e s PRO Brake System PRO Cut Off Gauge Simplifies cutting. PRO Cut-Off Quickly, safely, and easily makes factory quality
More informationLegacy Slimline Pencil Kit
Description: The model is considered one of the most basic pen kits and is a great starter kit for those new to pen turning. Many experienced pen turners use the kit to make elaborate and unusual pens
More informationMINI-LATHE QUICK CHANGE TOOL POST
MINI-LATHE QUICK CHANGE TOOL POST Cutting and assembly details Machinists should familiarize themselves with the contents of this section before jumping in to the drawings. Many details are described here
More informationLegacy Classic Twist Pencil Kit
Legacy Pencil Kit Description: The pencil is great kit and has features to make it a step-up pen. It is slightly more difficult to make, but still very easy if you follow these instructions carefully.
More informationLegacy Magnet Pen Kit
Description: The Magnet pen model is a variation of the Slimline pen and considered one of the most basic pen kits and is a great starter kit for those new to pen turning. Sometimes called the Refrigerator
More informationSPARE PARTS LIST MODEL NO. LB1200F PAGE 1 ITEM PART NO. DESCRIPTION QTY NOTE
PAGE 1 001 JM21000018 HEX.SOCKET HEAD SCREW M5X12 4 002 JM21000019 SPRING WASHER 5 4 003 JM21000020 FLAT WASHER 5 4 004 JM21000021 UP COVER COMPLETE 1 005 JM21000025 MICRO SWITCH FIX PANEL A 1 006 JM21000026
More informationOnyx 90 Media Cutter. Parts Manual
Parts Manual Professional Picture Frame Equipment 441 South Whitted Street Hendersonville, NC 28739 Thank you for purchasing the Onyx 90 Media Cutter. Please read all instructions before operating your
More informationTAPPING SCREWS 1-1 TAPPING SCREWS PHILLIPS OVAL. 1 General Fasteners HEAD ZINC BLACK SIZE SIZE CHROME CHROMATE OXIDE
TAPPING SCREWS TAPPING SCREWS PHILLIPS OVAL HEAD ZINC BLACK SIZE SIZE CHROME CHROMATE OXIDE #4 x 3/8"... REG... 110001 #4 x 1/2"... REG... 105030... 110002 #4 x 5/8"... REG... 1 10003 #4 x 3/4"... REG...
More informationJK Crusher Corners. *Includes ONE of the Hardware Kits (not both)
INSTALLATION INSTRUCTIONS INST-18-05-020_A JK Crusher Corners IMPORTANT: Thank you for purchasing this Poison Spyder product. Please read through this entire document before proceeding with installation.
More informationMODEL H9565 BALL BEARING GUIDE FOR G0513/G0514 INSTRUCTION SHEET
MODEL H9565 BALL BEARING GUIDE FOR G0513/G0514 INSTRUCTION SHEET Introduction The Model H9565 replaces the upper and lower Euro-style guides on your G0513 or G0514 Bandsaw. Inventory (Figure 1) A. Upper
More informationF i t t i n g t h e N e w L a n d i n g G e a r t o Y o u r S k y J i b V 1
F i t t i n g t h e N e w L a n d i n g G e a r t o Y o u r S k y J i b V 1 1 P a r t s L i s t : S t a n d a r d L a n d i n g G e a r U p g r a d e Product Code Parts + Spares Product Code Parts + Spares
More informationCERAMIC TIP DUAL CERAMIC TIP
DURACLAMP Designed To Last Engineered to provide superior strength and durability, the Duraclamp will stand up to your toughest racking requirements. Metal Finishers worldwide have made our Duraclamp the
More informationParts Catalog MIXERS
Parts Catalog MIXERS MODELS: SP20 & SPC20 SP20 0--2 IMPORTANT! TO EXPEDITE SHIPMENT OF PARTS, ALWAYS SPECIFY MODEL, REV, PART NUMBER, AND SERIAL NUMBER OF MIXER. GLOBE FOOD EQUIPMENT COMPANY 225 East River
More informationCalf-Tel Pen System Assembly Instructions
Calf-Tel Pen System Assembly Instructions (Instructions work for 4, 6, and the 7 Pen Systems) 1 ASSEMBLY OF PEN FRONT AND WALLS START THE ASSEMBLY BY LINING UP THE TWO UNI-DIRECTIONAL ARROWS IN THE TOP,
More informationUNIVERSAL TOOLS. 572 Shop. Motion Pro T-Handle Socket Wrenches. Motion Pro Mini-Pro T-Handle Deep Socket Wrench
Motion Pro T-Handle Socket Wrenches Metric T-Handles feature a durable nickel pewter finish Deep 6-point sockets Lifetime replacement warranty DESCRIPTION TCI PART # RETAIL 8 mm Socket 722-8093 $ 17.95-J
More informationCONTROLS KIT FOR ALL # & # HARLEY DAVIDSON SPORTSTER MODELS
INSTALLATION INSTRUCTIONS TC BROS. CHOPPERS PART #0-0075 & #0-0076 (No Pegs) FORWARD CONTROLS KIT FOR ALL 00-0 HARLEY DAVIDSON SPORTSTER MODELS If downloading & printing these instructions online, be sure
More informationSTAR TOOL SUPPLY / GRAND TOOL SUPPLY
Made of hardened and tempered tool steel with ground points. es have knurled grip. Set consists of 1 each of 5 punches in plastic pouch. Point Size Length 1/16 3 3040004 5/64 4 3040005 3/32 4 3040006 9/64
More informationTube Facer For 3/8 1-1/2 Tube OD - ETF Style
Tube Facer For 3/8 1-1/2 Tube OD - ETF Style Tube & Pipe Cleaners Tube Testers Tube Plugs Tube Removal Tube Installation Operating and Maintenance Instructions www.elliott-tool.com SAFETY 1. Remove the
More informationGota cassette. Version 1.10 Sun Protection AVZ 3G.1
Version 1.10 Sun Protection AVZ G.1 G.2 Sun Protection AVZ Version 1.10 Part number Description Paint finish Length in m 1 4211 772-090 Alu wall bracket 140 mm Mill finish 4211 772-008 Idem RAL 705 light
More informationModel No: SM2502. Parts Information: Mini Drilling & Milling Machine
Page 1 of 6 Page 2 of 6 Page 3 of 6 1 SM2502.001 BASE 2 SM2502.002 X-AXIS FEEDING SCREW -- SM2502.002-1 KEY 4x16 4 SM2502.004 DIAL 5 SM2502.005 HAND WHEEL 6 SN8.S STEEL NUT M8 ZINC DIN934 (SINGLE) 7 SM2502.007
More informationInstalling the Partridge RA Extension on Losmandy G11
Installing the Partridge RA Extension on Losmandy G11 Michael Herman July 20, 2015 Tools: 3/16 inch hex key (allen wrench) [If desired for DEC indicator ring friction improvement: flat screwdriver, and
More informationDraw-Bar Spare Parts JANUARY 2019
Draw-Bar Spare Parts The Diamond Chase Draw-Bar Frame will last you a life time. The frame is guaranteed watertight for life. Replacement draw bars, bolts, and the nylon locking rod are available as needed.
More informationPSC-43X. Owner s Manual SEATED CALF RAISE
SEATED CALF RAISE Owner s Manual WWW.BODYSOLID.COM THERE IS A RISK ASSUMED BY INDIVIDUALS WHO USE THIS TYPE OF EQUIPMENT. TO MINIMIZE RISK, YOU MUST FOLLOW THESE RULES: Inspect equipment before each workout.
More informationAgri-Fab OWNERS MANUAL MODEL NO CU. FT. FARM/YARD CART. CAUTION: Read Rules for Safe Operation and Instructions Carefully
Agri-Fab OWNERS MANUAL MODEL NO. 45-01772 CAUTION: Read Rules for Safe Operation and Instructions Carefully 14 CU. FT. FARM/YARD CART Safety Assembly Operation Maintenance Parts the fastest way to purchase
More informationModel 204B-EM Elbow Mandrels Rev TABLE OF CONTENTS
92-0697 Rev. 970131 Model 204B-EM Elbow Mandrels TABLE OF CONTENTS CUSTOMER MESSAGE Inside Front Cover SAFETY PRECAUTIONS 3 GENERAL DESCRIPTION 6 MAINTENANCE 7 OPERATION 8 TROUBLE SHOOTING 11 ACCESSORIES
More informationPARTS LIST MS 2892-D
PARTS LIST MS 89-D 8--00 8-0-000 KNIFE BRACE (TOP) 8--00 RIGHT KNIVE (UHMW) 8--00 LEFT KNIFE (UHMW) 8-0-00 KNIFE BRACE (UNDER) NC0-8-0 0 FLAT HEAD SOCKET CAP SCREW STAINLESS /8- X " LG NC0-9-00 0 LOCK
More informationK/D FITTINGS & FASTENERS
K/ FITTINGS & FASTENERS -1 Screws P. 162-168 -2 Connector Bolts P. 169-173 -3 K/ Fittings P. 174-177 -4 Insert Nuts P. 178-181 -5 Allen Keys P. 182-183 -6 Nails & Wall Plugs P. 184 -1 Screws 1010 Machine
More informationModel SQM-2AC Squaring Module Rev TABLE OF CONTENTS
92-0714 Rev. 970428 Model SQM-2AC Squaring Module TABLE OF CONTENTS CUSTOMER MESSAGE Inside Front Cover SAFETY PRECAUTIONS 3 GENERAL DESCRIPTION 6 SPECIFICATIONS 7 MAINTENANCE 8 OPERATION 9 CUTTING SPEEDS
More informationLegacy Bullet Click Pen Kit
Description: The Bullet Click pen is a step-up kit, with similar features to a Power Click Pen. It has a click mechanism instead of a twist. It uses an 8mm tube and a Parker style gel refill. It is popular
More informationFastener Basics. Common Fastener Types. Fastener Materials. Grade / Class and Fastener Strength
Fastener Basics Common Fastener Types Fastener Grade (US) or Class (metric) refers to the mechanical properties of the fastener material. Generally, a higher number indicates a stronger, more hardened
More informationHQ Precision-Glide Track Upgrade 2 Extension Kit for HQ Studio Frame Part# QF09750
HQ Precision-Glide Track Upgrade 2 Extension Kit for HQ Studio Frame Part# QF09750 Important Note: Upgrading the track system on the HQ Studio Frame requires the use of this 2 Extension Kit (Part #QF09750),
More informationAX80041 AXA433 AXA433
42 AX30499 AX30578 AXA083 AXA083 20 AXA465 AXA465 AX80026B AX80078 AX30410 AX30410 AX80078 AX80078 AXA0414 AXA0414 AXA0414 AX80046E AX80046E AX30785 AX30785 AXA175 AXA175 43 AX80044 AX80031 AX80031 AX30531
More informationLeveling Feet, Base Plates and Casters
Leveling Feet, Base Plates and Casters 77 Leveling Foot 1 1 Fastening to profile end Fastening in T-slot of profile For leveling tables and light equipment. Ratchet-type height adjustment requires no tools.
More informationPHG-1000X. Owner s Manual HOME GYM
HOME GYM Owner s Manual WWW.BODYSOLID.COM THERE IS A RISK ASSUMED BY INDIVIDUALS WHO USE THIS TYPE OF EQUIPMENT. TO MINIMIZE RISK, YOU MUST FOLLOW THESE RULES:! " # $ % & ' ( ) * + ' (, ' " -. *, * ) )
More informationDelrin Cone T-Handle Spring Stop w/pad...9 Screw Jack Large Toggle Clamp w/pad...9 Adjustable Ball Positioner...14
Distributed by Rapp Industrial Sales INDEX Aluminum Fixture Plates...4 Pin Rest...11 Acrylic Plates...4 Thread Adapter...11 Fixturing Towers...5 Delrin Cone...11 CMM Fixturing Kits...6-7 Magnetic Rest
More information3000, 4000, 4100, 7500, 7700
3000, 4000, 4100, 7500, 7700 Drum & Disc Brake Lathes s Identification READ these instructions before placing unit in service. KEEP these and other materials delivered with the unit in a binder near the
More informationEuropean cylinder 3 point lock. for aluminium and steel doors
European cylinder 3 point lock for aluminium and steel doors European cylinder 3 point locks for aluminium and steel doors HIGH SECURITY - Horizontally sliding lateral deadbolt. - Pre-setting for additional
More informationNUMBER 1 Di-Acro Hand Notcher
OPERATOR S MANUAL & INSTRUCTIONS NUMBER Di-Acro Hand Notcher Di-Acro, Incorporated PO Box 9700 Canton, Ohio 7 373 Progress Street N.E. Canton, Ohio 705 330-55-9 330-55-00 (fax) Revised 0/0 Sale or distribution
More informationFastener Basics. Common Fastener Types. Fastener Materials. Grade / Class and Fastener Strength
Fastener Basics Common Fastener Types Fastener Grade (US) or Class (metric) refers to the mechanical properties of the fastener material. Generally, a higher number indicates a stronger, more hardened
More informationSTARTING SERIAL NUMBER PARTS LIST FOR. Wellsaw MODEL 600 METAL CUTTING BAND SAW
STARTING SERIAL NUMBER 11075 PARTS LIST FOR Wellsaw MODEL 600 METAL CUTTING BAND SAW Wellsaw 2829 N. Burdick, Kalamazoo, MI 49004 Phone: 269-345-1132 Fax: 269-345-0095 Rev 171005 INSTALLATION, OPERATION
More informationRP4 INSTRUCTION MANUAL
RP4 INSTRUCTION MANUAL BEFORE YOU BEGIN Thank you for purchasing the Pemberton Raceworks and RP4 Designs RP4 pan car. This manual is intended people familiar with 1/10th scale pan car racing, and should
More informationAssembly Instructions & Operations Handbook
Assembly Instructions & Operations Handbook Congratulations! You are the proud owner of the Explorer ATV Trailer. Your Explorer is partially knocked-down for easy shipment, assembly is required. Follow
More informationModel PLM5113N PETROL LAWN MOWER
Strana 1 / 2 Strana 2 / 2 Strana 1 / 4 001 671006065 "BLADE TIGHTEN BOLT 3/8""24" 1 002 671010730 LID SHAPE WASHER 1 003 DA00000973 BLADE 510MM 1 004 671015252 BLADE SUPPORT 1 005 DA00000535 FLAT KEY 1
More informationAssembly & Installation Instructions
Portable Garden Hose Reel Cart Model 1043 Assembly & Installation Instructions 1 2 3 4 5 6 8 7 9 10 11 12 13 14 Reel Specifications Max. Temperature...140 F (60 C) Max. Pressure...150 PSI (10 Bar) 15 CONTENTS
More informationPARTS LIST CHARGER 2716 DB
PARTS LIST CHARGER 2716 DB 1 ITEM PART NO. DESCRIPTION QTY. 101 6495381 LEFT OUTER BEARING / PIVOT MOUNT 1 102 9121450 5/16-18 HEX NUT WITH NY-LOK INSERT - PACK OF 5 4 103 9121210 1/4-20 X 5/8 HEX BOLT
More informationMODEL T10815 GRINDING ATTACHMENTS INSTRUCTIONS
MODEL T10815 GRINDING ATTACHMENTS INSTRUCTIONS For questions or help with this product contact Tech Support at (570) 546-9663 or techsupport@grizzly.com Introduction Designed to work exclusively with the
More informationTIRE RACK INSTALLATION INSTRUCTIONS Dodge Sprinter
Aluminess Products Inc 9402 Wheatlands Ct. #A Santee, CA 92071 619-449-9930 TIRE RACK INSTALLATION INSTRUCTIONS 07-11 Dodge Sprinter Please read before beginning Stainless steel hardware may bind together
More informationAssembly. Item G7 Qty 1. Item D4. M10 x 55 mm Allen Bolt. Item D5. Qty 2. Item E13 Qty 4 M10 Flat Washer. Item B18. M8 x 30 mm Allen Bolt (Black)
ACCESSORY FITMENT LIST These are all the accessories you will need to complete the assembly of your product. The following accessories are supplied in a pack and should be checked before attempting assembly
More informationFULLER CHISELS CUTTING TOOLS
CUTTING TOOLS Back FULLER CHISELS From the standard Wood Chisel to our top-of-the-line Woodworker s Chisel, FULLER offers the perfect combination of variety and quality in its chisel line-up. Finely honed
More informationABUS USA LLC 83 Series 2. Best Rekeyable Ever
ABUS USA LLC www.abus.com 83 Series 2 Best Rekeyable Ever REKEYABLE 83 SERIES 2 The Locksmith s Padlock of Choice For well over 50 years, the locksmith s commercial padlock of choice has been a 45mm brass-bodied
More informationFree Standing Frame and Canopy
Patriot Docks Free Standing Frame and Canopy Required Tools: Cordless Drill, 3/8 drill bit, 17mm wrench, 18mm wrench, 6mm hex key (included), 8mm hex key (included) Helpful Tips: Assembling and installing
More informationCATALOG AND PRICE LIST August, 2008 Serving The Hobby Community
Online: www.rtlfasteners.com Toll Free 800-239-6010 or 757-523-9293 757-482-0012 Email: info@rtlfasteners.com Fax: 757-523-9699 757-482-0038 CATALOG AND PRICE LIST August, 2008 Serving The Hobby Community
More informationHINGES SPECIFICATIONS
SPECIFICATIONS MORTISE HINGE SPECIFICATIONS FEATURES: Extruded brass, full mortise hinges are machined for precise installation and smooth movement. Knuckles are milled to a clearance of 0.010 (.25mm)
More informationTools Needed. 8 per column: stainless steel or hot-dipped galvanized bolts. Mallet
Structural VINYL PERGOLA SuperiorPlasticProducts.com Tools Needed Drill Safety Glasses 1 Hammer Drill & 1/2" Masonry Bit Tape Measure & Pencil Drill Bits 1/8" 1/4" 5/8" Level 8 per column: Ratchet & Sockets
More informationPower Tool Accessories
Milwaukee Tool MilwaukeeTool.com Power Tool Accessories Band Saw Blades Deep Cut Band Saw Blades Overview Maximize your band saw performance and make straight, accurate cuts in a variety of materials with
More informationWrenches. Wrenches. F o r P. r o f e. s s i o. n a l s. .. S i. n c e 1
F o r P r o f e Klein s line of wrenches are forged from the finest steel and are designed to deliver great strength, and long working life. Regardless of the job type, Klein has a wrench that will help
More informationWARNING Indicates a hazardous situation which, if not avoided, could result in death or serious injury. WARNING. Ranger XP Door Kit
REVISION 04 November, 20 2018 Ranger XP Door Kit Prior to installation, please verify if a revised version of this instruction sheet is available on Knowledge Center. The following symbols may be used
More informationCongratulations on purchasing the Spirit Rails Magnetic Attach that allows easy wand to pack removal and reattachment by just getting close!
Introduction Congratulations on purchasing the Spirit Rails Magnetic Attach that allows easy wand to pack removal and reattachment by just getting close! The Spirit Rails Magnetic Attach Kit is designed
More informationElimination of Elevator Bounce
For the Agilent Archon Autosampler Rework Instructions CAUTION This kit is intended for use by Agilent Service personnel only. Elevator Removal 1 Open top cover. 2 Open front lower door. 3 Remove vial
More informationIF YOU DON T SEE IT HERE
www.smithfast.com Drills & Taps & Bits Screws Cotter Drilling Bolts / Hex Capscrews Lag Carraige Hitch Grade 8 Machine Grade Elevator 5 Sheet Spring Metal Roll Grade Eye 2 Square Taper Head set A325 Hex
More informationLegacy Slimline Touch Pen Kit
Description: The model is considered one of the most basic pen kits and is a great starter kit for those new to pen turning. Many experienced pen turners use the kit to make elaborate and unusual pens
More informationIM-2 SE UNDERPINNER.!!! For your safety!!! Read the instructions manual carefully SAP: 0
MANUAL IM-2 SE UNDERPINNER!!! For your safety!!! Read the instructions manual carefully SAP: 0 OPERATIONS 0504272 INTRODUCTION Congratulation upon your purchase of the INMES IM-2 SE Underpinner, designed
More informationAssembly Instructions & Operations Handbook
Assembly Instructions & Operations Handbook Congratulations! You are the proud owner of the Super Explorer ATV Trailer. Your Super Explorer is partially knockeddown for easy shipment, assembly is required.
More informationPACKING LIST MACO V-5000
PACKING LIST MACO V-5000 PART QTY O.D. SIZE LENGTH DESCRIPTION CHECKLIST T47P 4 5/8.050 36 Aluminum Tubing _ T43P 1 7/8.050 48 Aluminum Tubing _ T18P 1 3/4.050 48 Aluminum Tubing _ T15P 1 5/8.050 48 Aluminum
More informationPSM-144X SMITH MACHINE. Owner s Manual
SMITH MACHINE Owner s Manual WWW.BODYSOLID.COM THERE IS A RISK ASSUMED BY INDIVIDUALS WHO USE THIS TYPE OF EQUIPMENT. TO MINIMIZE RISK, YOU MUST FOLLOW THESE RULES: Inspect equipment before each workout.
More informationSTANDARD "T" HANDLE CLAMPS
STANDARD "T" HANDLE CLAMPS Standard "T" Handles 401 1" 405 2" 410 3" 420 6" 430 9" 440 12" Multi-purpose clamps combine the best features of ordinary "C" and parallel clamps. Free-floating jaws adjust
More informationINSTALLATION OF WELLS SUPER QUICK CHUCK LEFT HAND ON BALDOR LATHE
DENTAL, INC. TECHNICAL BULLETIN Q832-022510 5860 FLYNN CREEK ROAD READ ALL INSTRUCTIONS P.O. BOX 106 BEFORE PROCEEDING COMPTCHE, CALIFORNIA, U.S.A. 95427 SAVE THIS FOR FUTURE REFERENCE THIS PRODUCT IS
More informationM-6 CORE BORE DRILLING MACHINE PARTS LIST. September 18, Part #
M-6 CORE BORE DRILLING MACHINE PARTS LIST September 8, 0 Part # 8008 Proposition 6 State of California Warning! Engine exhaust and some its constituents are known to the State of California to cause cancer,
More informationIn a class of its own:
www.gsmotion.com In a class of its own: Easy To Design Easy To Install Take the safe route. The incredibly solid and wear resistant safety fence system guarantees the highest level of quality, longevity,
More informationParts and tools needed for installation- Cleaning and Painting -
Thank you for the purchase of our JK Rear Trail Doors. We have made these from 6061-T6 aluminum and reinforced them with stiffeners at the top that double as a comfortable armrest and support for Rugged
More informationCAB END BEDTRAX (SIDE VIEW)
Supplied Hardware: (8-14) 1/4-20 Allen head bolts, (12-18) UHMW mount blocks, (4) D-ring tie downs Tools Needed: Allen head wrench GET TO IT. INSTALLATION INSTRUCTIONS STEP 1. INSERT (2) MOUNT BLOCKS INTO
More informationEcoGlide Sliding Door System
SOLUTIONS FOR TRADE EcoGlide Sliding Door System November 2017 SOLUTIONS FOR TRADE CONTENTS Page 4 Page 5 Page 6-20 2100 Series Floor Guided Sliding Door System 3100 Series Wall Guided Sliding Door System
More informationOPERATIONAL MANUAL V1.0. Removing/Replacing Blades
OPERATIONAL MANUAL V1.0 BLUEROCK WS-212 Wire Stripper Removing/Replacing Blades CAUTION!! IMPORTANT!! DANGER!! WARNING!! DISCONNECT MACHINE FROM POWER BEFORE PROCEEDING!! Estimated Completion Time: 90
More informationSCREWDRIVERS AND NUT DRIVERS
SCREWDRIVERS AND NUT DRIVERS No toolbox would be complete without an assortment of screwdrivers. Stanley Proto has a complete line of professional screwdrivers in enough shapes, sizes, and tips to turn
More informationHOUSE PARTS PACKED IN HOUSE BOX PARTS IN PLASTIC BAG (HARDWARE) PARTS IN SMALL PLASTIC BAG (FLOOR CLIPS) PARTS PACKED IN BUNDLE
Check parts against this list before starting assembly. Refer to illustrations on pages 6 and 7 to view house parts. If any shortages are found, refer to Packing Slip for claim instructions. Item 3 5 6
More informationHINGES SPECIFICATIONS. Hinge Chart - General Specifications
SPECIFICATIONS MORTISE HINGE SPECIFICATIONS FEATURES: Extruded brass, full mortise hinges are machined for precise installation and smooth movement. Knuckles are milled to a clearance of 0.010 (.25mm)
More informationDRILL BITS & THREAD REPAIR DRILL BITS
DRILL BITS DRILL BITS Designed for drilling soft metal mild steel wood plastic and PVC Manufactured from industrial high speed steel surface treated for high performance and long life 29 piece set includes
More informationComplete line of Holemaking Products and Accessories
Complete line of Holemaking Products and Accessories I N T R O D U C I N G Holemaking Products Klein Tools has expanded our line of Holemaking products. We have added new flexible drill bits and related
More informationWe are well-known Manufacturer and Supplier of broad gamut of Hand Tools such as Wrenches, Pipe Die Sets, Drilling Machines, Hand Tools, etc.
We are well-known Manufacturer and Supplier of broad gamut of Hand Tools such as Wrenches, Pipe Die Sets, Drilling Machines, Hand Tools, etc. These are highly appreciated for optimum quality, corrosion
More informationAX1001. Smith/Functional training Combo-free weight ASSEMBLY INSTRUCTIONS
AX1001 Smith/Functional training Combo-free weight ASSEMBLY INSTRUCTIONS EXPLODED DIAGRAM 83 84 84 85/86 87 87 88 89 90 91 62 64 64 64 64 64 64 65 65 65 65 66 66 65 66 66 65 63 63 66 67 68 55 66 66 70
More informationVisit to see the full line of Ohaus Balances
DIAL-O-GRAM BALANCE Model 310 and CENT-O-GRAM BALANCE Model 311 Instruction Manual INTRODUCTION This manual covers Installation and Operation for the Ohaus Dial-O-Gram Balance Model 310 and Cent-O-Gram
More information