CANADA S CUTTING EDGE
|
|
- Nancy Lang
- 6 years ago
- Views:
Transcription
1 CANADA S CUTTING EDGE ADVANCED CONTROL SYSTEMS CORP. Paisley Lane, Stouffville, Ontario L4A 7X4 Tel: Fax:
2 90 CARBIDES ACS LIGHTI ACS SPORTI ACS MAXI Less steering pressure Entry level carbide Safer casual riding Works with minimal studding (50-75) 5 6 bolts on host bar of 6 cutting carbide edge in centre wear pad at each end Works well with minimal studding (50-98) 5 6 bolts on host bar 9 of 6 90 cutting carbide edge, 5 in centre at each end Everyday rider ideal for trails Works with average studding (96-44) 8 bolts on host bar 7 of 6 cutting carbide 4 in centre at each end ACS PROI ACS TWIN 4 I ACS GRIPPER SKII Perfect for high hp sleds Long lasting Works with aggressive studding (44-40) 8 bolts on host bar 0 of 6 cutting carbide egde, 7 in centre at each end Reduces darting as it makes its own groove Provides truer tracking on rutted trails Two 7 6 steel bars welded onto a steel flat plate 4 Twin Runner 4 of 8 90 carbide on each host bar Designed for the Polaris Gripper Ski 5 6 bolts on 8 square host bar Comes in 4, 6, and 8 of 8 cutting carbide edge POWER SPORTS PARTS 60 CARBIDES ACS CHAMPI Aggressive rider & cross country racer Works with aggressive studding (44+) 8 bolts on host bar 5 of 60 cutting carbide edge 4 wear pad ACS FORMULAI Ultimate cutting carbide Super aggressive Works with aggressive studding (44+) 8 bolts on host bar 7 of 60 cutting carbide edge 4 wear pad ACS USII Designed for use on USI skis 8 bolts on host bar Available in 7, 9, of 8 cutting carbide edge wear pad ACS TWIN 6 & 8 I Reduces darting as it makes its own groove Provides truer tracking on rutted trails Two 7 6 steel bars welded onto a steel flat plate 6 Twin Runner 6 of 6 60 carbide on each host bar 8 Twin Runner 8 of 6 60 carbide on each host bar All runners supplied with Nyloc nuts & washers. Runners can be used with ski skins or plastic skis.
3 BULLDOG CLUTCH PULLER ACS pullers are made from a high grade alloy steel which resists stress, the same material that is used for drill collars, trailer axles and hydraulic machinery shafts. Our pullers are heat treated to increase durability and strength. NOTE: Apply a small amount of grease when using the puller. ACS-0 /4 x 6 NF Polaris 500/600 XC/RMK 700/800 XCR/RMK ACS- /4 x 6 NF Polaris Sport Touring, 440XCR, all , ACS-05 4 x mm Skidoo, All Formula 88-95, Formula III 95-96, Safari and all 58 motors ACS-5 /4 x 6 NF OEM Polaris Indy 98 Newer ACS-6 4 x.5mm Arctic Cat 000cc 007 Newer (4 Tower Clutch) ACS-7 /4 x 6 NF Polaris ATV 985 Newer All primary clutches ACS-8 4 x.5mm Arctic Cat 650/V 4x Kawasaki Prairie 700 KFX All Kawasaki 700 V-Force All Kawasaki Brute Force 650/750 All Kawasaki Mule 000 Series All Suzuki 700 Twin Peaks 4x Please visit for a complete Application Guide.
4 BLACK MAX HELIX SKI-DOO We offer a large number of angles and will custom cut to your specs upon request. 4 4 Radius edge for less hang up and wear Spring holes are chamfered to prevent spring bind Aerospace coating for optimum smooth performance and durability Tapered Lead in Edge for easier installation Angles are progressive cut Reverse helixes available PROUDLY MADE IN CANADA
5 BLACK MAX HELIX POLARIS We offer a large number of angles and will custom cut to your specs upon request. 4 4 Radius edge for less hang up and wear Spring holes are chamfered to prevent spring bind Aerospace coating for optimum smooth performance and durability Tapered Lead in Edge for easier installation Angles are progressive cut Reverse helixes available PROUDLY MADE IN CANADA
6 BLACK MAX HELIX SKI-DOO QRS We offer a large number of angles and will custom cut to your specs upon request. Radius edge for less hang up and wear Tapered Lead in Edge for easier installation Angles are progressive cut STRAIGHT PROGRESSIVE /4 47/4 50/44 5/46 60/48 44/6 48/40 50/46 54/44 44/8 48/4 50/4 55/45 44/40 48/4 5/44 55/49 46/40 48/44 5/46 56/46 46/4 50/8 5/48 58/44 46/44 50/40 5/4 58/46 PROUDLY MADE IN CANADA
7 BLACK MAX HELIX SKI-D00 RER We offer a large number of angles and will custom cut to your specs upon request. Radius edge for less hang up and wear Spring holes are chamfered to prevent spring bind Aerospace coating for optimum smooth performance and durability Angles are progressive cut Reverse helixes available STRAIGHT PROGRESSIVE 40/44 46/40 48/40 50/4 5/46 54/4 40/47 46/4 48/4 50/44 5/47 54/44 44/7 46/50 48/44 50/46 5/48 54/46 44/40 46/5 48/5 50/47 5/40 54/48 44/48 47/40 48/54 50/54 5/44 54/50 44/50 47/4 50/8 5/8 5/47 56/44 46/8 47/44 50/40 5/44 5/50 56/50 PROUDLY MADE IN CANADA
8 BLACK MAX HELIX SKI-DOO ROLLER We offer a large number of angles and will custom cut to your specs upon request. 4 4 Radius edge for less hang up and wear Spring holes are chamfered to prevent spring bind Aerospace coating for optimum smooth performance and durability Tapered Lead in Edge for easier installation Angles are progressive cut Reverse helixes available STRAIGHT PROGRESSIVE 40/6 44/8 46/4 48/4 40/8 44/40 46/44 50/40 4/8 46/9 47/4 50/4 44/6 46/0 47/4 50/44 44/0 46/8 48/8 44/6 46/40 48/40 PROUDLY MADE IN CANADA
9 BLACK MAX HELIX ARCTIC CAT We offer a large number of angles and will custom cut to your specs upon request. Longer ramp for maximum shifting Aerospace coating for optimum smooth performance and durability Angles are progressive cut Reverse helixes available STRAIGHT PROGRESSIVE 56/40 58/4 60/44 6/4 56/4 58/44 60/46 6/44 56/44 58/46 60/48 6/48 56/46 58/48 60/50 6/50 56/48 60/40 60/5 6/5 58/40 60/4 60/54 6/54 PROUDLY MADE IN CANADA
10 POWER SPORTS PARTS ALUMINUM WASHERS The Original ACS Washer! Thickness The washers are 0.00 thick for optimal strength. Dimensions The washer inside diameter is 5/6. There are two available outer diameters.75 and.75. Minimum weight. Maximum strength. Original ACS washer they are said to be the BEST on the market today! Made of a high strength aluminum alloy. Back side is counter-bored to insure a flat, snug fit against the track. Machined, not stamped, keeping material s strength at its best. PART # QUANTITY HOLE DIA. OUTER DIA. BW0-AL-0 0 /4.75 BW0-AL /4.75 BW0-AL /4.75 BW0-7AL-0 0 7mm.75 BW0-7AL mm.75 BW0-7AL mm.75 BW0-5AL-0 0 5/6.75 BW0-5AL /6.75 BW0-5AL /6.75 BW0-5AL-0 0 5/6.75 BW0-5AL /6.75 BW0-5AL /6.75 OTHER PRODUCTS Flexible Ice Scratcher Kit includes: carbide stud nut 5/6 x 8 Hex Bolt 0mm x 40 Hex Bolt 8mm X 5 mm The ACS Flexible Ice Scratcher is cutting edge with a design that allows the snowmobiler to reverse without snapping it. It has a replaceable carbide tip. It is easily bolted on and combines superb durability and universal fit for a great value. Reversible made from an aggregate polymer RMDS material that is both incredibly strong and extremely flexible allowing you to go forward or in reverse. No more breaking your scratchers. Replaceable Tips allows you to easily replace your Ice Scratchers tips at a minimum cost. Universal Quick and easy installation on virtually any snowmobile. 4 Nyloc Nut /4 4 Washer /4 4 Flat Head Bolt /4 x 0 x Lock Washer 5/6 Hex Head Bolt /8 x 6 x /4 Flat Washer /8 Nyloc Nut /8
11 Universal Ice Scratcher Kit The ACS Universal Ice Scratcher will fit on any sled and will drag along hard packed conditions to turn up the snow and ice to keep sliders and heat exchangers cool. When not needed the ice scratchers can be lifted and placed onto the skid frame so they are out of the way. Universal Ice Scratchers are sold in pairs. Design The ice scratcher is designed with spring tensioned super strong steel. Universal ACS Universal Ice Scratchers can be installed on virtually any snowmobile. Comes with clear installation instructions for a quick and easy fit. Kit includes: Right and left scratcher Two /8 Nyloc nuts Two /8 x -/ NCT bolts Two /8 lock washers Two /8 collars Spring Puller Tunnel Protectors This handy spring tool will remove exhaust pipe springs, tank or seat holding springs, cotter pins and many other hard to access parts. ACS Spring Pullers are made of steel and are zinc plated to resist rusting. Handling The ACS Spring Puller is designed with a T-handle to ensure a solid grip while removing springs. Length It has a length of 7-/ to reach those distances that are difficult to get to.
12 More than just powersports products Advanced Control Systems Corp. is a full service machine shop manufacturing high precision machined parts for use in the following industries: Powersports, Hydro, Swingstage, Refractory and Industrial. ACS equipment includes skin packaging, induction heating, CNC lathes from bar capacity and 5 to 0 chucks, CNC mills, welding and bending capabilities and includes full Quality Control facilities. We machine various types of material Steel, Aluminum, Copper, Stainless, Plastic or Brass. We do short or long runs, with a high degree of quality at a competitive price. POWER SPORTS PARTS ADVANCED CONTROL SYSTEMS CORP. Paisley Lane, Stouffville, Ontario L4A 7X4 Tel: Fax: For your next project, give ACS a call!
STUD SELECTION GUIDE. If you still have questions after reviewing this Stud Selection Guide, visit and Ask The Experts.
STUD SELECTION GUIDE For 50 years, Woody s has been manufacturing quality traction products while providing exceptional customer service. Woody s has a variety of snowmobile studs to cover every style
More informationWESTERN WIRE PRODUCTS
WESTERN WIRE PRODUCTS Celebra ng 100 years of Quality and Service 1914 2014 Thanks to our dedicated employees and customers we are celebra ng 100 years of being in business and we look forward to servicing
More informationDecide what reach is required. This must be at least equal to or larger than the depth of the part which needs removal. Safe Working Load (tonnes)
Sykes-Pickavant pullers are manufactured to a very high specification and subjected to rigorous testing - far exceeding their stated capacities. The legs and beams are drop forged from high quality steel
More informationGAGING AND INSPECTION
Fixture Plates...75 Fixturing Towers...76 CMM Fixturing Kits... 77-78 Clamping Components... 79-80 Standoffs and Locators... 81-82 Magnetic Components... 83-84 Height Adjustment...84 Positioners...85 Clamp
More informationHex Head Bolt Set N - Includes lock nut. Used to connect male and female T connectors. Galvanized. 3/4" x 3-1/2". Standard Grade (f) Part #24279
a Standard Grade (3/16 ) and Commercial Grade(1/4 ) Tie Down Is designed for use with 1-1/2" thick lumber (minimum width 6"). All hardware is mounted with 3/8" carriage bolts. All male and female dock
More informationChoosing the right puller for the job. Types of Puller
Pullers Sykes-Pickavant pullers are manufactured to a very high specification and subjected to rigorous testing - far exceeding their stated capacities. The legs and beams are drop forged from high quality
More informationDRILL BITS & THREAD REPAIR DRILL BITS
DRILL BITS DRILL BITS Designed for drilling soft metal mild steel wood plastic and PVC Manufactured from industrial high speed steel surface treated for high performance and long life 29 piece set includes
More informationThe new motor and motor mount. The remote control and 3 axis DRO mounted
Modifying a Mill/Drill I bought this mill/drill about 4 years ago and knew from the very beginning that some changes were going to have to be made. I am a big fan of VFDs (variable frequency drives) to
More informationMINI-LATHE QUICK CHANGE TOOL POST
MINI-LATHE QUICK CHANGE TOOL POST Cutting and assembly details Machinists should familiarize themselves with the contents of this section before jumping in to the drawings. Many details are described here
More informationEEBR312A Brake Lathes Parts Identification
EEBR312A Brake Lathes s Identification READ these instructions before placing unit in service. KEEP these and other materials delivered with the unit in a binder near the machine for ease of reference
More informationPliers. Pliers PLIERS
Pliers Pliers PILERS Long Nose Pliers With Side Cutter Comfortable two-component handles combine durability with a secure non-slip grip. High-leverage joint placement increases leverage to reduce the cutting
More informationHolemaking Products & Accessories
Holemaking Products & Made of top-of-the-line materials for longer lasting performance, Klein's diverse line of drill bits and holemaking products and accessories provide accuracy and consistency to get
More informationCarbide Tipped Hole Cutters
Carbide Tipped Hole Cutters The solution for drilling holes in sheet metal up to /8 thick Deliver more holes per charge in battery-powered drills Cut thin materials, including stainless steel, quickly
More informationSteel Construction & Steel Construction & Tools
Steel Construction & Klein has combined unique design features with skillful engineering and manufacturing to create a superior line of steel construction tools. These tools are exceptionally rugged, with
More information7x --Tailstock Cam Lock
7x --Tailstock Cam Lock By Magic Brian magicbrian40@yahoo.com Probably the most pleasing mod to have, but often not done through lack of milling facility s This version does NOT require a mill. MATERIALS
More informationB-Too Drilling and Tapping Machine Instruction and Maintenance Manual
B-Too Drilling and Tapping Machine Instruction and Maintenance Manual Thank you for your purchase of the B-Too Drilling and Tapping Machine. Please read and understand this short operation manual. Our
More informationCOYOTE. Product Guide VOLUME 1
COYOTE Product Guide VOLUME 1 CYLINDER HEAD STUD KITS The key to optimum combustion chamber sealing and long-term reliability, ARP head studs are the ideal replacement for factory TTY (Torque To Yield)
More informationSteel Construction Tools
F o r P Steel Construction Tools r o f e s s i o n a l s. Klein has combined unique design features with skillful engineering and manufacturing to create a superior line of steel construction tools. These
More informationSTAR TOOL SUPPLY / GRAND TOOL SUPPLY
Tel: 20-5-8 / Fax: 20-59-7 50 Huyler St / So. Hackensack, NJ 070 USA JIG AND RECIPROCATING Starrett offers industrial quality high speed steel edge bi-metal saw blades. These blades have a high speed steel
More informationSTAR TOOL SUPPLY / GRAND TOOL SUPPLY
Made of hardened and tempered tool steel with ground points. es have knurled grip. Set consists of 1 each of 5 punches in plastic pouch. Point Size Length 1/16 3 3040004 5/64 4 3040005 3/32 4 3040006 9/64
More informationPremium Power Tool Accessories Proudly Made in the USA
Premium Power Tool Accessories Proudly Made Table of Contents Make it Snappy Tools Premium Power Tool Accessories Proudly Made About Us Founded in a basement machine shop in Minnesota in 1962, we are a
More informationDrill Bits & Hole Saws
F o r P Drill Bits & Hole Saws r o f e s s i o n a l s. Klein drill bits provide accuracy and consistency for professionals. Made of top-of-the-line materials for longer-lasting performance, Klein drill
More informationSmall Block Ford. 289 / 302 / 351W / 5.0 Installation Manual For Systems with A/C #13600 / #13620
Small Block Ford 289 / 302 / 351W / 5.0 Installation Manual For Systems with A/C #13600 / #13620 Billet Specialties, Inc. 500 Shawmut Avenue. La Grange, Illinois 60526 Tech Line (708) 588-0505 Fax (708)
More information15 Industrial Tools. Recognized by Professionals. Work Together. Scribing Needle. Replacement of Scribing Needle. Features. Use A B
Industrial Tools Recognized by Professionals Work Together With battery : Sleeve package Card Box Clear package Scribing Needle 74444 74468 78638 78646 7864 7860 7444 74469 Retracts needle by turning body
More informationOPERATOR'S MANUAL 46" SNOW BLADE. Model Numbers OEM IMPORTANT: READ SAFETY RULES AND INSTRUCTIONS CAREFULLY
OPERATOR'S MANUAL 46" SNOW BLADE Model Numbers 190-833-OEM IMPORTANT: READ SAFETY RULES AND INSTRUCTIONS CAREFULLY MTD PRODUCTS INC. P.O. BOX 368022 CLEVELAND, OHIO 44136-9722 PRINTED IN U.S.A. FORM NO.
More informationMetal Shapers Forums and Tech Rodding Roundtable Home Forums Events Members Webring Tech Merchandise Contact Chat Services Links Want Ads Advertising
Metal Shapers Forums and Tech Home Forums Members Webring Tech Contact Chat Services On the following pages your will find detailed instructions on the parts needed and assembly instructions for a 12"
More informationHYDRAULIC CONTROL DETAILS PARTS LIST
Always give model number, serial number and part number when ordering repair parts. HYDRAULIC CONTROL DETAILS PARTS LIST REF NO. PART NUMBER DESCRIPTION 1 101939 Hydraulic Tank 2 101940 Hydraulic Tank
More informationTel / (USA & CANADA) /
Tel.58.847 / 8.388.459 (USA & CANADA) / Email sales@msdiscounttool.com MULTIPURPOSE CLAMPS - USA SERIES 7: Lightweight and 4% stronger than C clamps. Floating jaws that always stay parallel. Designed to
More informationINSTALLATION OF WELLS SUPER QUICK CHUCK LEFT HAND ON BALDOR LATHE
DENTAL, INC. TECHNICAL BULLETIN Q832-022510 5860 FLYNN CREEK ROAD READ ALL INSTRUCTIONS P.O. BOX 106 BEFORE PROCEEDING COMPTCHE, CALIFORNIA, U.S.A. 95427 SAVE THIS FOR FUTURE REFERENCE THIS PRODUCT IS
More informationComplete line of Holemaking Products and Accessories
Complete line of Holemaking Products and Accessories I N T R O D U C I N G Holemaking Products Klein Tools has expanded our line of Holemaking products. We have added new flexible drill bits and related
More informationMachine Your Fishing Reel
Machine Your Fishing Reel You will be well prepared for the coming season if you start on this smooth-running job now. IF you're an enthusiastic fisherman and have a lathe in your workshop, we'll say no
More informationHolemaking Products & Accessories
Holemaking Products & Holemaking Products & Made of top-of-the-line materials for longer lasting performance, Klein's diverse line of drill bits and holemaking products and accessories provide accuracy
More informationMODEL 7000 BEVEL-MILL
MODEL 7000 BEVEL-MILL HECK INDUSTRIES P.O. BOX 425 HARTLAND, MI 48353 TOLL FREE: 800-886-5418 PHONE: 810-632-5400 FAX: 810-632-6640 WWW.HECKIND.NET INSTRUCTION MANUAL Save This Manual You will need the
More information3000, 4000, 4100, 7500, 7700
3000, 4000, 4100, 7500, 7700 Drum & Disc Brake Lathes s Identification READ these instructions before placing unit in service. KEEP these and other materials delivered with the unit in a binder near the
More informationHDL(M)6 Nut/Screw Assembly
HDL(M)6 Nut/Screw Assembly Remove, repair, and reassemble the nut and screw assembly in your HDL series double lock vise. In these instructions when we refer to the front of the vise or nut/screw assembly,
More informationDelrin Cone T-Handle Spring Stop w/pad...9 Screw Jack Large Toggle Clamp w/pad...9 Adjustable Ball Positioner...14
Distributed by Rapp Industrial Sales INDEX Aluminum Fixture Plates...4 Pin Rest...11 Acrylic Plates...4 Thread Adapter...11 Fixturing Towers...5 Delrin Cone...11 CMM Fixturing Kits...6-7 Magnetic Rest
More informationRZR 900 Trail / XC / 900 / 1000 S/4
RZR 900 Trail / XC / 900 / 1000 S/4 Polaris RZR 900 Trail - Trail Fox Edition - XC - 900 S/4-1000 S 2015+ Part #: 5601513, 5601514 Rev. 031417 491 W. Garfield Ave., Coldwater, MI 49036. Phone: 517-278-7768
More informationMETRIC / IMPERIAL MINI-MAG LEVEL
Digital Mini-Mag Level 570 Series Measuring range 360 (4 x 90 ) Embedded magnets on three sides Resolution 0.05 Accuracy +/- 0.2 Standard 9V battery Dimensions: L60mm x H60mm x W35mm METRIC / IMPERIAL
More informationIt is highly recommended that you use a thread lock compound such as Loctite brand on all threads to keep them from vibrating loose.
Installation instructions for FC12 Forward Controls for Kawasaki Vulcan 750 It is highly recommended that you use a thread lock compound such as Loctite brand on all threads to keep them from vibrating
More informationTechnical T-A & GEN2 T-A GEN3SYS APX. Revolution & Core Drill. ASC 320 Solid Carbide. AccuPort 432. Page CONTENTS. Set-up Instructions 256
Technical ASC 0 Solid Carbide CONTENTS Page Set-up Instructions 6 AccuPort 4 Recommended Speeds & Feeds 60 Guaranteed Application Request Form 99 +44 (0)84 400 900 +44 (0)84 400 0 enquiries@alliedmaxcut.com
More informationTel / (USA & CANADA) /
MACHINE SHOP DISCOUNT SUPPLY Tel 0.8.87 / 800.88.09 (USA & CANADA) / Email sales@msdiscounttool.com SUPER PRECISION WEDGE TYPE TOOL POST AND TOOL HOLDER SETS Wedge Type Tool Posts are precision engineered
More informationStainless Steel CNC Machined Parts Turned Components :
STAINLESS STEEL CNC MACHINED PARTS TURNED COMPONENTS Stainless Steel CNC Machined Parts Turned Components : We create metal turned parts with virtually any material including aluminum, brass, cast iron,
More informationEraser Conveyor Belt Cleaning System IWARNING Always obey all applicable safety rules. Be sure all power to the conveyor has been disconnected and con
INSTALLATION GUIDE LIB-CP-REA-03-01 Rev. 10 Eraser Conveyor Belt Cleaning System ARGONICS Eraser Conveyor Belt Cleaning System IWARNING Always obey all applicable safety rules. Be sure all power to the
More informationCalf-Tel Pen System Assembly Instructions
Calf-Tel Pen System Assembly Instructions (Instructions work for 4, 6, and the 7 Pen Systems) 1 ASSEMBLY OF PEN FRONT AND WALLS START THE ASSEMBLY BY LINING UP THE TWO UNI-DIRECTIONAL ARROWS IN THE TOP,
More informationOffering a full range of anchoring and tie down systems including:
Offering a full range of anchoring and tie down systems including: BE SURE TO CONSULT LOCAL REGULATORS FOR CODE QUESTIONS AND THE MANUFACTURERS INSTALLATION MANUAL FOR PROPER MATERIALS. Anchors Pan Systems
More informationc. Pins, bolts, and retaining rings b. Washers, locking nuts, and rivets
62 20 HW 8: Fasteners / Force, Pressure, Density Mechanical Systems DUE Mon, 11/21/16 Start of class Check link on website for helpful fastener information Please use a scantron. Material is based primarily
More information3000, 4000, 4100, 7500, 7700
3000, 4000, 4100, 7500, 7700 Drum & Disc Brake Lathes Model 4000 Shown s Identification READ these instructions before placing unit in service. KEEP these and other materials delivered with the unit in
More informationANCHORS SLEEVE ANCHORS BOLT DIAMETER
SLEEVE ANCHORS No hole spotting. No mis-alignments. Simply drill through the fixture into concrete, insert and tighten. Preassembled for fast, easy installation. No special tools necessary; meets federal
More informationSTRENGTH Aligned teeth provide superior gripping power over standard vertical teeth. STRENGTH Diamond serrated jaws provide a firm grip
STRENGTH Aligned teeth provide superior gripping power over standard vertical teeth STRENGTH Diamond serrated jaws provide a firm grip PLIERS AND SNIPS Locking Pliers Slip Joint Pliers Electrician s Pliers
More informationPTC Model 4. Programmable Turntable Controller. Basic Motor Mount Kit P/N Installation Instructions
PTC Model 4 Programmable Turntable Controller M Basic Motor Mount Kit P/N 09-820 Installation Instructions New York Railway Supply 625 Aviator Dr Fort Worth TX 76179 (817) 233-5068 http://www.nyrs.com
More informationHertel Indexable Drills (HID)
Hertel Indexable Drills (HID) mscdirect.com/hertel DESIGNED TO DELIVER Hertel cutting tools are designed to deliver consistency, reliability, durability and value with every cut. For over 65 years, Hertel
More informationAPPLICATION CHART. Tractor Model * Wood Splitter HOME TRACTORS ATTACHMENTS INDEX
R Ingersoll HOME WOOD SPLITTER J31, K31 AHSHD, HSHD, J32, K32, J32 J34, K34, L34 AHSWD, HSWD, K36 Parts Catalog 8-2052 NOTE: This Catalog replaces Catalog 8-2051 TRACTORS ATTACHMENTS INDEX PAINT GENERAL
More informationSERRATING / GROOVING TOOL - ST SERIES. Features : 1/8 x3/8 x1/8
3 1 8 2-2 SERRATING / GROOVING TOOL - ST SERIES FOR GROOVING IN TUBE SHEETS Tool 1/8 x 3/8 x 1/8 Spacing Spare Tool Bits 1/8 x 1/4 x 1/8 Spacing Special Spacing 9.53 3/8 ST-375-970 ST-3703 ST-3703-S ST-3703-SPEC
More informationCreate cable assemblies to fit your style
2015 Feeney (11/15) Quick-Connect Brochure #2015-975B Create cable assemblies to fit your style Quick-Connect Solutions Guide The fast and easy way to create your own CableRail assemblies! Our CableRail
More informationSTAR TOOL SUPPLY / GRAND TOOL SUPPLY
MULTIPURPOSE CLAMPS - USA SERIES 7: Lightweight and 4% stronger than C clamps. Floating jaws that always stay parallel. Designed to eliminate distorting or twisting action. Cantilever action provides 4:
More informationThe Point of Sale Cutting Tool Solution for Professionals
The Point of Sale Cutting Tool Solution for Professionals Professional Grade Cutting Tool for Professional Trades Champion s ipac system provides you with professional grade cutting tools in individual
More informationWORKSHOP EQUIPMENT. TIGER 2000S Ø200 x 40mm K 220 grinder stone 120W / 240V motor. Order Code: W859 $220 RRP JIG 60. Order Code: W8642 $38 50 RRP
WORKSHOP EQUIPMENT NOV-DEC 2018 JAN 2019 INDUSTRIAL BENCH GRINDER WITH LINISHER & MITRE TABLE X8-PLUS 200mm medium grade wheel 750W / 1hp 240V motor Disc Mitre Table with Guide WETSTONE GRINDER TIGER 2000S
More informationRZR 900 XC/Trail 2 Lift Kit
RZR 900 XC/Trail 2 Lift Kit Polaris RZR 900 XC/Trail 2015+ Part #: 5101256 Rev. 060817 491 W. Garfield Ave., Coldwater, MI 49036. Phone: 517-278-7768 E-mail: sales-rtpro@sporttruckusainc.com SAFETY WARNING
More informationPUNCHING DRILLING HEBEN LIFTING CUTTING DEBURRING
PUNCHING DRILLING LIFTING CUTTING DEBURRING www.alfra.de E-EN E ALFRA Edge-Milling and Deburring Devices Overview KFV KFH 150 Page 7 78 2520 25100 Prism mounting L = 150 / W = 20/40 End mill Ø 45 or straight
More information3000, 4000, 4100, 7500, 7700 Drum & Disc Brake Lathes
3000, 4000, 4100, 7500, 7700 Drum & Disc Brake Lathes Model 4000 Shown Parts Identification READ these instructions before placing unit in service. KEEP these and other materials delivered with the unit
More information1.5 C a b l e I n s t a l l a t i o n S o l u t i o n s
1.5 C a b l e I n s t a l l a t i o n S o l u t i o n s H o l e S a w s Starrett HellermannTyton, aware of the needs of the professional user, presents a range of Starrett hole saws. Starrett bi-metal
More informationHOME WORKSHOP HANDBOOK Rugged BENCH GRINDER. By JOEL B. LONG
6 HOME WORKSHOP HANDBOOK Rugged BENCH GRINDER W By JOEL B. LONG ITH this bench grinder you can keep your cutting tools sharp and do general offhand grinding, and can, with the aid of various attachments,
More informationShorePort PWC Lift Instructions " x 138" Sandstone ShorePort " x 138" White ShorePort " x 138" Tan ShorePort
ShorePort PWC Lift Instructions 00-8" x 8" Sandstone ShorePort 009-8" x 8" White ShorePort 090-8" x 8" Tan ShorePort....... - PUT SAFETY FIRST To avoid the risk of personal injury or death, study and fully
More informationBallpark-4 Groomer Model No.: B-BP-4 Operation & Parts Manual
Ballpark-4 Groomer Model No.: B-BP-4 Operation & Parts Manual P a g e 2 Table of Contents Cover Page 1 Table of Contents 2 Welcome to Bannerman 3 Warranty 4 General Information & Tool Functions 5 How to
More informationorder online at
F-2 LENGTHS OF FINGER JOINTS REVERSIBLE By far the most common joint. Requires two heads; one with thick cutter at top of stack and one with thick cutter at bottom of stack. This joint may also be achieved
More informationCommander 2 Lift Kit
Commander 2 Lift Kit Can-Am Commander 2010+ Part #: 5102204 Rev. 082416 491 W. Garfield Ave., Coldwater, MI 49036. Phone: 517-278-7768 E-mail: sales-rtpro@sporttruckusainc.com SAFETY WARNING RT Pro UTV
More informationPLOW MOUNT KIT FOR POLARIS RANGER P/N ASSEMBLY / OWNERS MANUAL
PLOW MOUNT KIT FOR POLARIS RANGER P/N 34-3010 ASSEMBLY / OWNERS MANUAL Application PLOW PUSH FRAME NO. 34-0000 or 34-0070 Before you begin, please read these instructions and check to be sure all parts
More informationCross Peen Hammer. Introduction. Lesson Objectives. Assumptions
Introduction In this activity plan students will develop various machining and metalworking skills by building a two-piece steel hammer. This project will introduce basic operations for initial familiarization
More informationROTARY TABLE OPERATION AND SERVICE MANUAL HORIZONTAL AND VERTICAL. Horizontal & Vertical. Rotary Table (HVRT) Tilting Rotary Table
Horizontal & Vertical Rotary Table (HVRT) OPERATION AND SERVICE MANUAL Tilting Rotary Table Horizontal & Vertical Rapid Indexer VERTICAL AND HORIZONTAL ROTARY TABLE This Horizontal & vertical table is
More informationLumber Smith. Assembly Manual. If you are having problems assembling the saw and need assistance, please contact us at:
Lumber Smith Assembly Manual If you are having problems assembling the saw and need assistance, please contact us at: 804-577-7398 info@lumbersmith.com 1 Step 1 Safety Carefully read the Owners Manual.
More informationCONTROLS KIT FOR ALL # & # HARLEY DAVIDSON SPORTSTER MODELS
INSTALLATION INSTRUCTIONS TC BROS. CHOPPERS PART #0-0075 & #0-0076 (No Pegs) FORWARD CONTROLS KIT FOR ALL 00-0 HARLEY DAVIDSON SPORTSTER MODELS If downloading & printing these instructions online, be sure
More informationJ D SQUARED INC. NOTCH MASTER Tube and Pipe Notcher Operating Instructions
Copyright (c) 2006 J D SQUARED INC. www.jd2.com NOTCH MASTER Tube and Pipe Notcher Operating Instructions Angled Notches PATENT PENDING Straight Notches Offset Notches Tube Clamp Slider Tube Clamp Exploded
More informationFULLER CHISELS CUTTING TOOLS
CUTTING TOOLS Back FULLER CHISELS From the standard Wood Chisel to our top-of-the-line Woodworker s Chisel, FULLER offers the perfect combination of variety and quality in its chisel line-up. Finely honed
More informationStudent, Department of Mechanical Engineering, Knowledge Institute of Technology, Salem, Tamilnadu (1,3)
International Journal of Scientific & Engineering Research, Volume 7, Issue 5, May-2016 11 Combined Drilling and Tapping Machine by using Cone Mechanism N.VENKATESH 1, G.THULASIMANI 2, S.NAVEENKUMAR 3,
More informationParts Manual. Field-Pro Heavy Harrow Bar. Part Number H
Parts Manual Field-Pro Heavy Harrow Bar Part Number H28542-04 IMPORTANT: ALL ITEMS ARE IDENTIFIED WITH A PART NUMBER. Some of the smaller parts such as bolts, nuts, washers, etc. are not all shown, however,
More informationWrenches. Wrenches. F o r P. r o f e. s s i o. n a l s. .. S i. n c e 1
F o r P r o f e Klein s line of wrenches are forged from the finest steel and are designed to deliver great strength, and long working life. Regardless of the job type, Klein has a wrench that will help
More informationCIC 200 PLASTIC SCREW ANCHOR ASSORTMENT WITH PHILLIPS BINDING HEAD METAL SCREWS. 6 x 3/4 P/N x 1 METAL SCREW P/N x 3/4 METAL SCREW
A21-1 1160 CIC 200 PLASTIC SCREW ANCHOR ASSORTMENT WITH PHILLIPS BINDING HEAD S For light duty applications in solid materials Color coded diameters for easy identifi cation Acid resistant NYLON FLANGED:
More information1.5. Installer & Connection Solutions. Starrett. The Hidden Edge Knife. Hole Saws & Kits
1.5 Starrett HellermannTyton, aware of the needs of the professional user, presents a range of Starrett hole saws. Starrett bi-metal hole saws are constructed of hardened, heat and abrasion resisting high-speed
More informationATLANTIC JIG BORER MODEL 4000
ATLANTIC JIG BORER MODEL 4000 THE MACHINE BUILT TO DO TOMORROW'S WORK TODAY! ATLANTIC JIG BORER MODEL 4000 No single feature makes one jig-borer better than another... it takes the proper balance of engineering,
More informationTAPPING CHUCKS & COLLETS
TAPPING CHUCKS & COLLETS CAT er Tension/Compression Holders 86 CAT er Rigid Holders 86 BT er Tension/Compression Holders 87 BT er Rigid Holders 87 HSK Tension/Compression & Rigid Holders 88 NMTB er Tension/Compression
More informationProfessional Power Tools & Accessories
Professional Power Tools & Accessories NEW Engine and outputs sold separately. 6.5HP 3L 20cm Ø 3150min -1 2.4KW (50Hz) 10.5A (230V) 21A (110V) 230V (16A) BS4343 AC 175 Bar 6m 8L / in 1L Powered by 75mm
More informationOPERATION & MAINTENANCE MANUAL
OPERATION & MAINTENANCE MANUAL AUTOMATIC PECAN CRACKER Food Processing Equipment and Machinery Specializing in the Pecan Industry Mailing: PO Box 817, Mansfield, Louisiana 71052 Located: 280 Independence
More informationFlame. Tree Pointed. Product Barcode Price Ø Length Shank Code
Workshop Range 28 Carbide Burs 29 HSS Countersinks 29 HSS Deburring 30 HSS Step Drills 30 Thread Gauges 31 Warragul Dies 32 Screw Extractors 33 Grabit Screw Extractors 34 Black Books Are you passionate
More informationTire Chain Kit. Replacing Shear Pins. Weight Kits. Drift Cutter
Replacing Shear Pins The augers are secured to the spiral shaft with two shear pins and cotter pins. If the auger should strike a foreign object or ice jam, the snow thrower is designed so that the pins
More informationFLIP TARP SINGLE & DOUBLE UNDERBODY TRAILERS
1-800-248-7717 1002 N. 15th Street, Middlesboro, KY 40965 FLIP TARP SINGLE & DOUBLE UNDERBODY TRAILERS INSTALLATION INSTRUCTIONS Congratulations on your purchase of a Mountain Flip Tarp Trailer system.
More informationDesign Drives Efficiency
Design Drives Efficiency EZ Breaker Chain Breaker EZ Chain Rack EZ Chain Wear Gauge EZ Breaker Chain Breaker Made in U.S.A. EZ BREAKER is a compact, easy to use tool for cutting roller chain. This simple,
More informationInspection. Assembly Install the springs. 1. Discard the 0-rings. 2. Clean all parts in cleaning solvent.
6010-34 Inspection 3. Install the springs. 1. Discard the 0-rings. 2. Clean all parts in cleaning solvent. 3. If spring test equipment is available, check the tension of each spring according to the specifications
More informationSnappy. Make it. No more hassling with a chuck key! Just push your bit into the Quick Chuck and it s locked in place. Change bits instantly!
Proudly Made in the USA ADAPTS ALL 1/4 HEX POWER BIT TOOLS TO YOUR POWER DRILL No more hassling with a chuck key! Just push your bit into the Quick Chuck and it s locked in place. Change bits instantly!
More informationAvailable in high-capacity. and assembled by hand for smooth operation. Durable chrome-plated finish. Heat-treated for long life.
Klein s line of wrenches are forged from the finest steel and are designed to deliver great strength and long working life. Regardless of the job type, Klein has a wrench that will help the professional
More informationInstalling CNC Stepper Motor Mounts On A Sherline Lathe
Installing CNC Stepper Motor Mounts On A Sherline Lathe P/N 6720 (6725 Metric) 4000/4100/4500/4600 Lathes P/N 6730 (6735 Metric) 4400/4410 Lathe USING THE TEMPLATE BLOCKS TO LOCATE NEW MOUNTING HOLES FOR
More information1949 to 1954 Chevrolet Dual Master Cylinder Conversion
1949 to 1954 Chevrolet Dual Master Cylinder Conversion This document is a one stop shop to getting your brake system updated on your old Chevy. Whether you re going with a disc conversion or just sticking
More informationPARTS LIST COMMANDER 20 VAC-TRAC COMMANDER 27 VAC-TRAC FH 541V
PARTS LIST COMMANDER 20 VAC-TRAC COMMANDER 27 VAC-TRAC FH 541V UPPER ASSEMBLY 101 6190481 THROTTLE CABLE FOR MODELS WITH ADDITIONAL CHOKE CABLE 1 101 6190751 THROTTLE CABLE FOR MODELS WITH OUT ADDITIONAL
More informationFree Standing Frame and Canopy
Patriot Docks Free Standing Frame and Canopy Required Tools: Cordless Drill, 3/8 drill bit, 17mm wrench, 18mm wrench, 6mm hex key (included), 8mm hex key (included) Helpful Tips: Assembling and installing
More informationPLOW MOUNT KIT FOR KAWASAKI TERYX, YAMAHA RHINO P/N ASSEMBLY / OWNERS MANUAL
PLOW MOUNT KIT FOR KAWASAKI TERYX, YAMAHA RHINO P/N 34-2025 ASSEMBLY / OWNERS MANUAL Application PLOW PUSH FRAME NO. 34-0000 or 34-0070 Before you begin, please read these instructions and check to be
More informationAssembly Instructions 10 X 10 Aluminum Roof Support
Assembly Instructions 10 X 10 Aluminum Roof Support Aluminum Roof Support Bolt Package 16-5/16 X 2 ¼ SS Bolt 24-5/16 X 1 SS Bolt 40-5/16 SS Nylon Lock Nuts 16-5/16 SS Flat Washers 28-4 ½ Wood Screws 36-1
More informationALUMINUM PIPE GUIDERAIL 01/01/
NOTES PIPE RAILING & POSTS: Structural Tube, Pipe and Bar shall be in accordance with ASTM B22 or ASTM B429, Alloy 606-T6. End Rail 90 bends and corner bends with maximum 4-0" post spacing, may be Alloy
More informationHMP-200 BENDER INSTRUCTION SET
HMP-200 BENDER INSTRUCTION SET HMP-200 BENDER ASEMBLY INSTRUCTIONS STEP 1 STEP 2 BOLT LEFT SIDE PLATE TO BASE AS SHOWN WITH 1/2 x20 HEX BOLT & FLAT WASHER WELD BASE TO PLATE ON EACH SIDE NOTE: OFFSET HOLE
More informationCHEVY/GMC SuperRail Mounting Kit #4423
CHEVY/GMC SuperRail Mounting Kit #4423 #4100 SuperGlide (16K) #4400 SuperGlide (20K) Gross Trailer Weight (Maximum) Vertical Load Weight (Max. Pin Weight) 16,000 lbs. 4,000 lbs. Gross Trailer Weight (Maximum)
More informationMarch 1, Fax:
March 1, 2017 U.S.A. Manufacturer The Cable Connection 52 Heppner Drive Carson City, Nevada 89706 800.851.2961 775.885.1443 Fax: 775.885.2734 E-mail: info@ultra-tec.com www.ultra-tec.com Framework You
More informationMounting the 6 or 12 Indexer on PRS Gantry Tools
Page 1 Mounting the 6 or 12 Indexer on PRS Gantry Tools About this guide: This document illustrates several options for mounting an indexer onto your ShopBot. You can choose the technique that works best
More information