Bojo Standard Scraper Tool Line Card

Size: px

Start display at page:

Download "Bojo Standard Scraper Tool Line Card"

Anne Mathews
5 years ago
Views:

1 Bojo Standard Scraper Tool Line Card P/N ATH-63-( )* Description: 1/4 (0.118 (3mm)) wide P/N ATH-23-( )* Description: 1-3/16 (1.375 (30.163mm)) wide P/N ATH-62-( )* Description: 1/4 (0.250 (6.35mm)) wide Description: P/N ATH-24-( )* 1-3/16 (1.375 (30.163mm)) wide P/N ATH-27-( )* Description: 1/2 (0.500 (12.7mm)) wide Description: P/N ATH-14-( )* 1-3/8 (1.875 (47.625mm)) wide P/N ATH-8-( )* Description: 3/4 (0.750 (19.05mm)) wide Description: P/N ATH-16-( )* 1-3/8 (1.875 )(47.625mm)) wide P/N ATH-2O-( )* Description: 13/16 ( (20.638mm) wide P/N ATH-11-( )* Description: 1-1/4 (1.250 (31.75mm)) wide P/N ATH-20A-( )* Description: 13/16 ( (20.638mm)) wide P/N ATH-111-( )* Description: (1.56 )(40mm) wide P/N ATH-28-( )* Description: 1 (1.000 (25.4mm)) wide P/N ATH-29-( )* Description: 2 (2.000 )(50.8mm) wide

2 Bojo Wide Scraper Tool Line Card P/N ATH-2-( )* Description: 1-1/4 (1.250 (31.75mm)) wide P/N ATH-11-( )* Description: 1-1/4 (1.250 (31.75mm)) wide P/N ATH-111-( )* Description: (1.56 )(40mm) wide P/N ATH-29-( )* Description: 2 (2.000 )(50.8mm) wide P/N ITH-12-( )* Description: 3-1/2 (3.500 ) wide P/N LTF-1ST-UNGL Description: 2 (2.0 ) wide

3 Bojo Curved Scraper Tool Line Card p/n ath-6-( )* for wedge Scraper for concentrating scraping p/n ath-17-( )* power into small regions. p/n ath-9-( )* for delicate scraping jobs that require less of a wedge angle. for scraping around sharp p/n ath-18-( )* outside edged corners. SERRATED EDGE SCRAPER angled for sharp edges and p/n ath-10-( )* corners. works best for removal of hard surface coating materials and allow penetrating surface p/n ath-56-xngl solvents to reveal substrate. a specially designed scraper for p/n ath-13-( )* tubes and pipes. works best for removal of material p/n ath-15-( )* from internally radiused surfaces

4 Bojo Curved Scraper Tool Line Card p/n ahs-8-( )* perfect for removing gaskets on aluminum or steel. p/n ahs-16-( )* perfect for scraping into corners and edges. p/n ahs-9-( )* for delicate scraping jobs that require less of a wedge angle. p/n ahs-17-( )* for concentrating scraping power into small regions. p/n ash-10-( )* angled for sharp edges and corners. p/n ahs-18-( )* for scraping around sharp outside edged corners. p/n ahs-11-( )* for delicate scraping jobs with larger areas to cover. p/n ahs-23-xngl allows scraping in both the pushing and pulling directions. p/n ahs-13-( )* a specially designed scraper for tubes and pipes. p/n ahs-24-xngl allows scraping at an angle in both the pushing and pulling directions. p/n ahs-14-( )* for scraping into corners or without changing the hold angle of the tool. p/n ahs-15-( )* works best for removal of material from inside radiuses surfaces. Large Heavy Duty Body Flat Air Chisel Tool p/n AHS-60-xngl a larger scraper tool for large panels and surface scraping. blade can easily be rehoned. Heavy duty body size. general specifications Engineering Plastic Material ( Material Code:-XNGL ) Additional Materials Available! AHS part number explanation Narrow Heavy Duty Body Flat Air Chisel Tool p/n AHS-61-xngl a narrow scraper tool for narrow panels and surface scraping. blade can easily be rehoned. Heavy duty body size.

6 p/n ath-1-( )* for splitting soft plastic parts also to smooth caulking. p/n ath-20-xngl for wedging and splitting deep into narrow locations. p/n ath-2-( )* for splitting soft plastic parts that are thin and fragile. p/n ath-21-xngl for prying in narrow and deep locations. p/n ath-3-( )* for small grommets and clips that require some leverage. p/n ath-22-xngl for prying grommets under long flat panels. p/n ath-4-( )* a 90 degree wedge specially designed for emblem removal. p/n ath-5-( )* for larger grommets and clips that require some leverage. p/n ath-26-ungl for removing delicate interior screw button caps. also designed for removing interior fittings that contain a driver slot. p/n ath-30-ungl tool is inserted into wire tie wraps to giude additional wires into bundle. p/n ath-6-( )* for wedge panels open to allow clip viewing and removal. p/n ath-50-pp designed for applying sealants and caulking evenly. p/n ath-7-( )* narrow flat forked pry for splitting panels. general specifications p/n ath-19-( )* for any prying or splitting that requires some leverage. p/n ath-19r406-ungl used for tight fits around medium sized panel clips. p/n ath-52-ungl blunt door seal trim tool p/n ath-54-xngl Channel cleaner p/n ath-55-xngl for stiff prying leverage under items. p/n ath-56-xngl for removing delicate interior panels and smart phone and tablet panels p/n ath-57-xngl tool is inserted into interior trim pieces for increase leverage. p/n ath-4c-xngl designed for pulling fuses, batteries. part number explanation

7 Bojo Curved Scraper Tool Line Card P/N LTF-1-UNGL P/N LTF-2-UNGL P/N LTF-3-UNGL P/N LTF-4-UNGL Wide Panel Wedge Tool Allows panels to be gently opened to apply expoxy or other binders. (P/N ITH-119-( ))

8 Bojo Specialty Service Tool Line Card P/N ATH-53-XNGL Description: Specialized Seat Rail Cleaner Wire Harness Tools P/N ATH-54-XNGL Description: Channel Cleaner P/N ATH-30-UNGL Description: Wire Hardness Guide Spoon P/N ATH-4C-XNGL Description: Designed for Pulling Fuses Top Feature Resets Fuse O-Ring Removal Tools P/N ITH-35-UNGL Description: Wire stuffing tool P/N ORT XNGL P/N ORT XNGL P/N ITH-36-UNGL Description: Wire pulling tool P/N ORT XNGL Replacement Handle and Tips Bead Tip P/N RT-41-S (Width: 20mm (0.8 ) Scoop Tip P/N RT-42-S (Width: 20mm (0.8 ) P/N SST UNGL Squeegee Tip P/N RT-43-S (Width: 20mm (0.8 ) Squeegee Tip P/N RT-44-S (Width: 30mm (1.2 ) P/N SST UNGL Handle P/N ITH-40-NGL *Replacement tips are available separately. Inch Metric P/N SST UNGL

9 Bojo Specialty Service Tool Line Card Composite Wrench Reducing Inserts Composite Wrench Tools Metric sizes P/N WI-3/8-1/4 -XNGL P/N WI-12-8-XNGL P/N WI-1/2-3/8 -XNGL P/N WI XNGL 13mm 12mm 10mm P/N WI XNGL P/N WI XNGL P/N WI XNGL P/N WI-9/16-7/16 -XNGL P/N WI-5/8-1/2 -XNGL P/N WI-11/16-9/16 -XNGL P/N WI-3/8'-1/4'-XNGL (3/8' reduces to a protected 1/4') P/N WI-1/2'-3/8'-XNGL (1/2' reduces to a protected 3/8') P/N WI-9/16'-7/16'-XNGL (9/16' reduces to a protected 7/16') P/N WI-5/8'-1/2'-XNGL (5/8' reduces to a protected 1/2') P/N WI-11/16'-9/16'-XNGL (11/16' reduces to a protected 9/16') SAE sizes 6mm 8mm 9/16 1/2 7/16 3/8 Cable Gland Wrench Tools P/N WI XNGL P/N ITH-CGW-24MM-XNGL P/N WI XNGL SAE Socket Size Description P/N ITH-CGW-20MM-XNGL Inch Metric P/N ITH-CGW-16MM-XNGL

Bojo MRO Tool Systems

Bojo MRO Tool Systems Additional Work Shop Tools. Unique Hi-Lok Sealant Application System and Hose assemblies for hard to reach areas. Unique Cargo Bay and Cabin Maintenance Tools. Wire Harness Handling