DC-50 DC-90 COMMERCIAL CLOSER COMMERCIAL CLOSER

Transcription

1

2 DC-50 COMMERCIAL CLOSER The DC-50 closer has a cast aluminum alloy body and is recommended for use on all commercial applications. Closers with non-hold open arms are UL listed for A label fire doors. Closers have full spring adjustment from sizes 2-5. Options BC: Backcheck HO: Hold open SPC: Packed w/ parrallel arm, cover, and thru bolts. (Size 4 only) Accessories Model # DC-52/53 DC-54/55 Body Length 8⅞ 9¾ Hole Pattern 8¹/₁₆" x ¾" 9¹/₁₆" x ¾" Grade 2 certified, ANSI/BHMA A156.4 UL listed compliant UL10C for positive pressure Spring size closers #2, 3, 4, 5 Non handed Full plastic cover Warranty: 10 years Finish: AL, DU DC-HOA50 Hold Open arm DC-NDP45 Narrow Drop Plate DC-525PABK Standard Parallel Arm Bracket DC-CO50 Cover DC-PAHO50 Hold Open Parallel Arm Bracket DC-SB25 1¾" Thru Bolts DC-90 COMMERCIAL CLOSER The DC-90 closer is identical to the DC50 series with the ability of spring adjustment. The DC90 series has cast aluminum alloy body and is recommended for use on all commercial applications. Closers with non-hold open arms are UL listed for A label fire doors. Fully compliant with opening force requirements for ADA and ANSI/BHMA standards. Closers have full spring adjustment from size 1 to size 4 for ADA Barrier Free and size 3 for standard size. Optional Tri-pack. Hole Pattern 9¹/₁₆" x ¾" Accessories DC-HOA50 Hold Open arm DC-CO50 Cover Meets ADA requirements DC-525PABK Standard Parallel Arm Bracket DC-SB25 1¾" Thru Bolts DC-PAHO50 Hold Open Parallel Arm Bracket Grade 2 certified, ANSI/BHMA A156.4 UL listed compliant UL10C for positive pressure Multi-size springs 1-6 adjustable power ADA compliant Three independent regulating valves- adjustable control sweep, latch and backcheck cushion DC-90BF: Pre-adjusted spring size 2 (ADA) DC-90: Pre-adjusted spring size 3 Non handed Slimline plastic cover Warranty: 10 years Finish: AL, DU, US3 Options BF: Barrier Free/ADA BC: Backcheck DA: Delayed Action SPC: Packed w/ parrallel arm, cover, and thru bolts. 1

3 DC-200 COMMERCIAL CLOSER The DC-200 is recommended for use on all aluminum store front doors, wood or hollow metal commercial applications. It is a versatile closer that provides narrow styling. The DC-201 is a multi-size spring model that offers adjustable power with a choice of sizes 3-6 where high rates of closing force are required. The DC-201ADA model also offers adjustable spring power sizes 1-4 for use on interior doors requiring less than 5 lbs of opening force and exterior doors requiring less than 8.5 lbs. This complies with ADA handicap codes and ANSI/BHMA standard requirements. Body Length 9⅞ Hole Pattern 9¹/₁₆" x ¾" Options BC: Backcheck HO: Hold open Accessories Grade 1 certified, ANSI/BHMA A156.4 UL listed compliant UL10C for positive pressure Aluminum alloy body Non-handed reversible Spring size closers #3, 4, 5 Multi-size cosers 1-4, 2-5 DC-201ADA: complies with ADA Two independent valves control sweep and latch closing speeds- backcheck optional Packed standard for regular & top jamb mounting Wood and machine screws Warranty: 25 years Finish: AL, DU DC-DP1214 Drop Plate DC-TJ1240 Top Jamb Extender DC-DP1204 Narrow Drop Plate DC-COV200 Cover DC-HOA1245 Hold Open arm DC-PAB1245 Standard Parallel Arm Bracket Meets ADA requirements DC-RA1240 Regular Arm DC-HOPAB1245 Hold Open Parallel Arm Bracket DC-70 HEAVY DUTY GRADE 1 The DC-70 closer has a cast aluminum body and is recommended for use on heavy duty commercial, architectural, and institutional applications. It is tri-packed with regular, parallel, and top-jamb mounting. Closers with non-hold open arms are UL listed for A label fire doors. Fully compliant with opening force requirements for ANSI/BHMA standards. Hole Pattern 11⅛" x ¾" Grade 1 certified, ANSI/BHMA A156.4 UL listed compliant UL10C for positive pressure Multi-size springs 2-6 adjustable power. Three independent regulating valves- adjustable control sweep, latch and backcheck cushion Pre-adjusted spring size 3 Non handed Full plastic cover Warranty: 10 years Finish: AL, DU, US3 Options BC: Backcheck HO: Hold open DA: Delayed Action Accessories DC-7009 Drop Plate DC-7003 Hold Open arm DC-7006 Hold Open Parallel Arm Bracket DC-SB25 1¾" Thru Bolts 2

4 DC-831/851 HEAVY DUTY GRADE 1 The DC-851/831 closer has a cast aluminum alloy body and is recommended for use on heavy duty commercial, architectural, and institutional applications. It is tri-packed with regular, parallel, and topjamb mounting. Closers with non-hold open arms are UL listed for A label fire doors. Fully compliant with opening force requirements for ADA and ANSI/BHMA standards. Closers have full spring adjustment from sizes 1-6 and are pre-adjusted to size 3. Accessories DC-DP851 Drop Plate DC-7006 Hold Open Parallel Arm Bracket DC-DP851W Wide Drop Plate DC-SB25 1¾" Thru Bolts DC-7003 Hold Open arm Hole Pattern 12" x ¾" Grade 1 certified, ANSI/BHMA A156.4 UL listed compliant UL10C for positive pressure Multi-size springs 1-6 adjustable power ADA compliant Three independent regulating valves- adjustable control sweep, latch and backcheck cushion DC-851 standard series DC-831 slimline series Non handed Full plastic cover Warranty: 25 years Finish: AL, DU Meets ADA requirements DC-4361 HEAVY DUTY GRADE 1 The DC-DX4361 is recommended for use on heavy duty commercial and institutional applications. It is tri-packed standard and comes with all necessary fasteners, brackets, and soffit plates for versatility. Closers with non-hold open arms are UL listed for "A" label fire doors. Fully compliant with opening force requirements for ADA and ANSI/BHMA standards. Hole Pattern 7½" x 1" Accessories DC-DP Drop Plate Pull Side DC-RA4361CNS Cushion Arm DC-DP436118PA Drop Plate Parallel arm DC-PAB4361 Parallel Arm Bracket DC-RA4361HD Heavy Duty Arm DC-SB25 1¾" Thru Bolts DC- RAHOA4361 Hold Open arm Grade 1 certified, ANSI/BHMA A156.4 UL listed compliant UL10C for positive pressure Multi-size springs 1-6 adjustable power ADA compliant Three independent regulating valves- adjustable control sweep, latch and backcheck cushion Tri-packed: regular pull side, top jamb, parallel arm Aluminum alloy shell Non handed Warranty: 25 years Finish: AL, DU Options CNS: Cush Action CAHO: Hold open cush Meets ADA requirements 3

5 DC-CTP40 EXTRA HEAVY DUTY GRADE 1 Hole Pattern 5" x 2¾" The DC-CTP40 closer has a cast iron body and is recommended for use on heavy duty commercial, industrial, and institutional applications. It is tripacked with regular, parallel, and top-jamb mounting. Closers with non-hold open arms are UL listed for A label fire doors. Fully compliant with opening force requirements for ADA and ANSI/BHMA standards. Closers have full spring adjustment from sizes 1-6 and are pre-adjusted to size 3. Grade 1 certified, ANSI/BHMA A156.4 UL listed compliant UL10C for positive pressure Multi-size springs 1-6 adjustable power ADA compliant Three independent regulating valves- adjustable control sweep, latch and backcheck cushion Non handed Full plastic cover Warranty: 25 years Finish: AL, DU, US3 Accessories DC-DP1840 Drop Plate Pull Side DC-DP18PA40 Drop Plate Parallel Arm DC-DP18G40 Drop Plate Top Jamb Drop DC-DP18TJ40 Back Plate Top Jamb Mount DC-HO40 Hold Open Arm DC-CA40 Cush Arm DC-CAHO40 Hold-Open Cush DC-SB25 1¾" Thru Bolts Meets ADA requirements ORDER SPECIFICATIONS PRODUCT DESCRIPTION AND CODING SECTION SERIES OPTION FINISH DC - 90 BF - AL CTP40 SPRBC70 851/ Door Closer Back check: BC Barrier Free: BF Delayed Action: DA Aluminum Painted- AL Duronodic Painted- DU Polished Brass- US3 4

6 DOOR CLOSER MODEL SELECTION DOOR SIZE WEIGHT CLOSER SIZE DC " Interior 36" Exterior 243 lbs. Adjustable " Interior 42" Exterior 258 lbs. Adjustable " Interior 30" Exterior 155 lbs. 3 44" Interior 36" Exterior 243 lbs. 4 48" Interior 42" Exterior 250 lbs 5 DC-50 32" Interior 137 lbs. 2 36" Interior 30" Exterior 155 lbs. 3 44" Interior 36" Exterior 243 lbs. 4 48" Interior 42" Exterior 250 lbs. 5 DC-90 48" Interior 36" Exterior 258 lbs. Adjustable " Interior 36" Exterior 243 lbs. Adjustable 1-4 DC-70 60" Interior 48" Exterior 225 lbs Adjustable 2-6 DC " Interior 48" Exterior 225 lbs. Adjustable 1-6 DC " Interior 48" Exterior 225 lbs. Adjustable 1-6 DC " Interior 48" Exterior 258 lbs. Adjustable 1-6 DC-CTP40 60" Interior 48" Exterior 258 lbs. Adjustable 1-6 ADA handicap standards state doors require less than 5lbs of opening force for interior doors and 8.5 lbs. for exterior doors. Commercial door closers which feature adjustable spring power sizes 1-4 comply with these standards. 5

7 DOOR CLOSER COMPARISON CHART TACO LCN NORTON DORMA DOR-O-MATIC FALCON RIXSON SARGET YALE CORBIN- RUSSWIN ARROW DC-50 NA 9300 NA SC90 NA NA 1100 NA NA DC-90 NA 9300 NA SC90 NA NA 1100 NA NA DC , 1070 * /7400 SC60/61 NA /51 NA DC N DC-70 NA SC80 NA NA 5016N DC-831 NA SC80 NA DC N DC-851 NA SC80FC NA DC N DC NA NA NA NA NA NA DC3000 NA DC-CTP / SC71 NA DC8000 DC500 TACO CAL-ROYAL INTERNATIONAL GLOBAL RYOBI SENTINEL S. PARKER TAYMOR CRL DC , 8000 TC2200 D , 815, / /1900 DC52/55 DC , 8000 TC2200 D , 815, / /1900 DC52/55 DC , , 8900 TC200 NA N/A NA NA PR40/42 DC TC600 D-3550 NA BF900 NA PR70BF DC-831 CR801S 5050 TC400 D NA NA PR50 DC-851 CR TC500 D-3550 NA NA NA PR52 DC-4361 NA NA TC4361 NA NA NA NA NA DC-CTP40 CR441 44CI TC4300 NA NA PR90 6

8 Trans-Atlantic Co. Architectural Catalog Tel: Fx:

9

10 ED-600 HEAVY DUTY RIM EXIT DEVICE The ED-600 series "rim type" exit device is suitable for all doors (aluminum, hollow metal, or wood) where there is no projection on the face. It is appropriate for all heavy duty commercial and industrial applications. Fits doors up to 48". ANSI A156.3 Grade 1 ED-F600: UL10C Fire rated; barrier XL: doors up to 48" Non-handed Door width: up to 36" Comes with standard strike and shim Dogging standard ONLY on non-ul fire rated Warranty: 10 years Finishes: AL, DU, US32D Accessories ED-LV610 Passage ED-KB600 ED-LV600 Entry ED-KB680 ED-LV680 Storeroom ED-RC051 Rim Cylinder Meets ADA requirements ED-THEX600 Entry Handleset w/ Thumbturn ED-ESEX600 Entry Handleset w/ Thumbturn ED-0SEX600 Overlapping Strike ED-SF1 Strike Filler ED-LF1 Latch Filler ED-VR600 HEAVY DUTY SURFACE VERTICAL ROD The ED-VR600 panic device blends the utility of a vertical rod application with the appearance of a modern style panic device. it is non-handed and reversible with a contoured cross bar that will fit doors up to 36". Suitable for heavy duty commercial and industrial applications. Accessories ANSI A156.3 Grade 1 ED-FVR600: UL10C Fire rated; barrier Non-handed Door width: up to 36" XL: doors up to 48" Comes with standard strike and shim Dogging standard ONLY on non-ul fire rated 12" Extension Rod available Warranty: 10 years Finishes: AL, DU ED-LVEX610 Passage ED-PS09 Overlapping Strike ED-KB600 ED-LV600 Entry ED-KB680 ED-LV680 Storeroom ED-RC051 Rim Cylinder Meets ADA requirements 1

11 ED-501 HEAVY DUTY RIM EXIT DEVICE The ED501 series "rim type" exit device is suitable for all doors (aluminum, hollow metal, or wood) where there is no projection on the face. It is appropriate for all heavy duty commercial and industrial applications. Fits doors up to 36" and XL for 48". ANSI A156.3 Grade 1 ED-F501: UL10C Fire rated; barrier Non-handed EAK500: Alarm kit Door width: up to 36" Available in XL for 48" Comes with standard strike and shim Dogging standard ONLY on non-ul fire rated Warranty: 1 year Finishes: AL, DU, US32D Accessories ED-BKL510 ED-LHL510 Passage ED-BKL500 ED-LHL500 Entry ED-BKL580 ED-LHL580 Storeroom ED-RC051 Rim Cylinder Meets ADA requirements ED-PP05 Pull Plate w/ cyl. hole ED-PP06 Pull Plate EAK500 Alarm Kit ED-PS09 Overlapping Strike ED-SF1 Strike Filler ED-LF1 Latch Filler ED-VR531 HEAVY DUTY SURFACE VERTICAL ROD The EDVR531 panic device blends the utility of a vertical rod application with the appearance of a modern style panic device. it is non-handed and reversible with a contoured cross bar that will fit doors up to 36"-48". Suitable for heavy duty commercial and industrial applications. ANSI A156.3 Grade 1 EDFVR531: UL10C Fire rated; barrier Door width: 36" XL: doors up to 48" EAK500: Alarm kit Comes with standard strike and shim Doors height: 7' 12" Extension Rod available Dogging standard ONLY on non-ul fire rated Warranty: 1 year Finishes: AL, DU Accessories ED-BKL510 ED-LHL510 Passage ED-BKL500 ED-LHL500 Entry ED-BKL580 ED-LHL580 Storeroom ED-RC051 Rim Cylinder EAK500 Alarm Kit ED-PS09 Overlapping Strike ED-SF1 Strike Filler ED-LF1 Latch Filler Meets ADA requirements 2

12 ED-301 NARROW STILE ANSI A156.3 Grade 2 Contoured aluminum Stainless Steel springs Latch Case: 1¼" w x 7¼" l with ½" throw Backset: 1 5/32" Strike: rim mounted roller strike with shim Projection: 4½" Stile: 2" minimum Non handed Door thickness: 1¾" standard Door width: up to 36" and shoulder mounting studs with set screws. Thumbturn dogging Warranty: 1 year Finishes: AL, DU The ED-301 "crash bar" style exit device are suitable for narrow, medium, or wide stile aluminum and hollow metal doors. It is designed for all heavy duty commercial and industrial applications. It is non-handed with a contoured cross bar that will fit doors up to 36" and can be field measured to accommodate narrow doors. Accessories ED-BKL510 ED-LHL510 Passage ED-RC051 Rim Cylinder ED-PS08 Overlapping Strike ED-BKL500 ED-LHL500 Entry ED-SF1 Strike Filler ED-BKL580 ED-LHL580 Storeroom ED-LF1 Latch Filler Meets ADA requirements ED-VR331 VERTICAL SURFACE ROD The ED-VR331 panic devices blend the utility of a vertical rod application with the appearance of a traditional panic device. it is non-handed and reversible with a contoured cross bar that will fit doors up to 36". Accessories ANSI A156.3 Grade 2 Contoured aluminum Interlocking top and pullman bottom latch Non handed Door thickness: 1¾" standard Door width: up to 36" Door height: up to 7' Fasteners: furnished with sheet metal, machine screws and shoulder mounting studs with set screws. 12" Extension Rod available Warranty: 1 year Finishes: AL, DU ED-RC051 Rim Cylinder ED-BKL510 ED-LHL510 Passage ED-PS08 Overlapping Strike ED-BKL500 ED-LHL500 Entry ED-SF1 Strike Filler ED-BKL580 ED-LHL580 Storeroom ED-LF1 Latch Filler Meets ADA requirements 3

13 ED-STED HEAVY DUTY RIM EXIT A156.3 Grade 2 Narrow Stile Includes rim cylinder Underwriter's Laboratories Inc. Listed Panic Hardware Requires a 2" mounting surface for typical use with narrow, medium, and wide style aluminum doors, hollow metal or wood doors. Non-handed Latch bolt throw ⅝" Dogging by hex key in touch bar Outside latching with standard rim cylinder Standard units for 36" and 48" Can be used for 30" doors Warranty: 10 years FInishes: AL, DU The ED-STED narrow stile "rim type" style exit device is stuiable for all doors where there is no projection on the face. Manufactured of extruded anodized aluminum, the ED-STED is durable enough for the most demanding applications. A rim cylinder is included. Accessories ED-RC051 Rim Cylinder ED-STEDPULL Aluminum Pull ED-STEDCVR CONCEALED VERTICAL ROD The ED-STEDCVR narrow stile "concelaed vertical rod" style exit devices are suitable for all doors where there is no projection on the face. Manufactured of extruded anodized aluminum, the ED-STEDCVR is durable enough for all applications. A156.3 Grade 2 Narrow style Includes mortise cylinder and mounting pad Underwriter's Laboratories Inc. Listed Panic Hardware Fore use with narrow, medium, and wide stile aluminum doors Non-handed Outside latching and dogging by cylinder key or dogging by hex key in touch bar Unit uses standard mortise cylinder with MS type cam Standard units for 36" and 48" door widths Can be field sized up to 84" in height Can be used with 30" wide doors Warranty: 10 years Finishes: Al, DU Accessories ED-TH1100-BC Mortise Cylinder ED-STEDPULL Aluminum Pull CYLINDER MOUNTING PAD with locking ring 4

14 ED-1100 NARROW STILE A156.3 Grade 2 Contoured anodized aluminum cross bar Latch Case: 1¼" w x 7¼" l with ½" throw Backset: 1 5 /32" from edge of door to center line Strike: rim mounted roller strike with shim 4¾" projection 1⅞" minimum stile Handed. Must specify LH or RH Door thickness: 1¾" Up to 42" wide door Field sizing ability Recommended installation at /32" from floor to center line of latch assembly Furnished with sheet metal, machine screws Accepts rim cylinder only Dogging: inside- push up dog pin rotate with screwdriver Warranty: 10 years FInishes: AL, DU The ED-1100ED "crash bar" style exit devices are suitable for narrow, medium, or wide stile aluminum and hollow metal doors. It is handed with a contoured cross bar that will fit doors up to 42" wide and can be field sized to accomodate narrow doors. Accessories ED-1100PLED Pull Plate w/ cyl. hole ED-RC051 Rim Cylinder ED-1100PLDUM Pull Plate ED-1100PLEO Exit Only Plate ED-1100CVR CONCEALED VERTICAL ROD A156.3 Grade 2 Contoured anodized aluminum cross bar Latch Case: 1¼" w x 7¼" l Backset: Center template Strike: flat mortise 4¾" projection 1⅞" minimum stile Handed. Must specify LH or RH Door: 1¾" thick, 7' hieght Up to 42" wide door Field sizing ability Recommended installation at /16" from floor to center line of latch assembly Furnished with sheet metal, machine screws Accepts mortise cylinder Dogging: inside- push up dog pin rotate with screwdriver Warranty: 10 years FInishes: AL, DU The ED-1100CVR panic device blends the utility of a vertical rod application with the appearance of a tradtional panic device. It is non-handed and reversible with a contoured cross bar that will fit doors up to 42" wide and can be field sized to accomodate narrow doors. Accessories ED-TH1100-BC Mortise Cylinder ED-1100CVRPAD Cylinder Mounting Trim 5

15 EXIT DEVICE COMMERCIAL COMPARISON CHART ANSI GRADE MATERIAL INTERN TELL S.PARKER CRL A Grade 1 Steel ED NA NA A Grade 1 Steel ED-VR NA NA A Grade 1 Steel ED VL520 NA A Grade 1 Steel ED-F F F NA A Grade 1 Steel ED-VR V NA A Grade 1 Steel ED-FVR F F V NA A Grade 2 Steel ED-301 NA NA NA NA A Grade 2 Steel ED-VR301 NA NA NA NA A Grade 2 Steel ED-STED NA NA 35A A Grade 2 Steel ED-VRSTED NA NA NA 3347A A Grade 2 Aluminum ED-1100ED NA NA NA NA A Grade 2 Aluminum ED-11OOCVR NA NA NA NA EXIT DEVICE HANDING DIAGRAM Inside Inside LH Outside Outside RH Left hand Right hand Inside Inside Outside LHR Left hand, Reverse bevel RHR Outside Right hand, Reverse bevel 6

16 Trans-Atlantic Co. Architectural Catalog Tel: Fx:

17

18 Trans-Atlantic offset pivots are used for both flush face frame installations and ⅛" recessed door applciations. Pivots replace most major door manufacturers. Suitable for aluminum doors weighing up to 125 pounds. Pivots are engineered and designed for durability, style, and are easy to install. OFFSET PIVOTS STOREFRONT HARDWARE To order pivots: For LHRB door order RH pivot For RHRB door order LH pivot SF-OP27/31 ARCH/VISTAWALL STYLE ¾" offset pivots for aluminum door and frames For flush door/frame and ⅛"recessed door applications Weather resistant Aluminum case construction ⅛" vertical adjustment Full race ball bearing and design provides smooth operation on pivot door portion No sag, entire weight of doors rests on floor mounted pivot portion Completely temper proof, yet easily removable, replaceable in unlocked position. Top portions of Arch/Vistawall available separately Finishes: AL, DU SF-OP27 Non-Handed SF-OP31 Handed SF-OP34 US ALUMINUM STYLE ¾" offset pivots for aluminum door and frames For flush door/frame and ⅛"recessed door applications Weather resistant Aluminum case construction ⅛" vertical adjustment Full race ball bearing and design provides smooth operation on pivot door portion No sag, entire weight of doors rests on floor mounted pivot portion Completely temper proof, yet easily removable, replaceable in unlocked position. Handed (must specify Right or Left) Finishes: AL, DU SF-OP34 1

19 Trans-Atlantic offset pivots are used for both flush face frame installations and ⅛" recessed door applciations. Pivots replace most major door manufacturers. Suitable for aluminum doors weighing up to 125 pounds. Pivots are engineered and designed for durability, style, and are easy to install. OFFSET PIVOTS STOREFRONT HARDWARE To order pivots: For LHRB door order RH pivot For RHRB door order LH pivot SF-OP40 ARMALITE STYLE ¾" offset pivots for aluminum door and frames For flush door/frame and ⅛"recessed door applications Weather resistant Aluminum case construction ⅛" vertical adjustment Full race ball bearing and design provides smooth operation on pivot door portion No sag, entire weight of doors rests on floor mounted pivot portion Completely temper proof, yet easily removable, replaceable in unlocked position. Top portions of Armalite available separately (non-handed). Handed (must specify Right or Left) Finishes: AL, DU SF-OP40 Armalite SF-OP41 PITTCO STYLE ¾" offset pivots for aluminum door and frames For flush door/frame and ⅛"recessed door applications Weather resistant Aluminum case construction ⅛" vertical adjustment Full race ball bearing and design provides smooth operation on pivot door portion Completely temper proof, yet easily removable, replaceable in unlocked position. No sag, entire weight of door rests on floor mounted pivot. Handed (must specify Right or Left) Finishes: AL, DU SF-OP41 Pittco 2

20 OFFSET PIVOTS STOREFRONT HARDWARE Trans-Atlantic offset pivots are used for both flush face frame installations and ⅛" recessed door applciations. Pivots replace most major door manufacturers. Suitable for aluminum doors weighing up to 125 pounds. Pivots are engineered and designed for durability, style, and are easy to install. SF-OP50 ALDORA STYLE ¾" offset pivots for aluminum door and frames For flush door/frame and ⅛"recessed door applications Weather resistant Aluminum case construction ⅛" vertical adjustment Full race ball bearing and design provides smooth operation on pivot door portion Completely temper proof, yet easily removable, replaceable in unlocked position. No sag, entire weight of door rests on floor mounted pivot. Handed (must specify Right or Left) Finishes: AL, DU SF-OP50 Aldora SF-OP51 YKK STYLE For new or replacement on YKK metal frame door hinges Flush frame and ⅛" recessed store front Die cast aluminum Full race ball bearing and oilite bronze bushing Weather resistant Door weight: up to 125 pounds Vertical adjustment ⅛" No sag, entire weight of doors rests on floor mounted pivot Completely temper proof Five piece set sold together Specifcy handing Finish: Al, DU SF-OP51 YKK 3

21 SF-OPKTP/OPKBP KAWNEER TOP AND BOTTOM PIVOT Trans-Atlantic offset pivots are used for both flush face frame installations and ⅛" recessed door applciations. Pivots replace most major door manufacturers. Suitable for aluminum doors weighing up to 125 pounds. Pivots are engineered and designed for durability, style, and are easy to install. SF-OPKTP Kawneer Top Pivot For flush door/frame and ⅛"recessed door A380 Precision diecast aluminum Oilite bronze bushing in top frame portion Full race ball bearing bottom door portions Door height adjustable by bottom door portion Door weight: up to 125 pounds Vertical adjustment: ⅛" Case hardened stud in floor/jamb position Includes steel reinforcement plates for the door portions Top and bottom pivots sold separately SF-OPKTP: Top pivot. Nonhanded SF-OPKBP: Bottom pivot. Handed (must specify LH or RH) Finishes: AL, DU SF-OPKBP Kawneer Bottom Pivot Thrust bearing DELUXE HINGE KIT DH-XH5 The DH-XH5 Deluxe Hinge Kits are the ideal choice for multiple application door solutions, when existing hardware fails. A quick and easy fix for any compromised opening. Roller bearing For commercial doors up to 500 lbs Non handed Flush or ⅛" offset door applications High-tensile aluminum alloy Self-lubricating pin rotates on anti-friction bearings Securely fastened with tamper proof screws Vertical adjustment screw Door easily serviced Packed and sold in pairs 1 year warranty Finishes: US28, DU Vertical Adj. Screw Deluxe Hinge Kit comes with: (2) roto pin hinges (12) one-way screws (4) cover strips (1) Allen wrench for vertical adjustment (2) ⅛" shims for flush door applications (1) instruction sheet Rotating Hinge Pin 4

22 INTERMEDIATE PIVOTS STOREFRONT HARDWARE Trans-Atlantic intermediate pivots are intended for taller doors that require additional support to keep the middle part of the door in line with the pivot hinges at the top and bottom. Intended to be used for both flush face frame installations and ⅛" recessed door applications. The pivots cannot be used on center hung doors. Suitable for aluminum doors weighing up to 125 pounds. Our pivots are engineered and designed for durability, style, and are easy to install. ¾" offset application for aluminum doors and frames Precision aluminum die cast Doors up to 90" in height should use one intermediate pivot. We recommend another intermediate pivot for each additional 30" Full race ball bearing backened by an oilite bronze bushing in the door portion. Case hardened pin to jamb portion fully retractable for ease of installation. Door thickness: 1¾" Easy vertical adjustment Please specify handing for SF-IP90 SF-IP10 INTERMEDIATE PIVOT SF-IP20 ARCH/ALMARLITE STYLE SF-IP90 INTERMEDIATE PIVOT SF-IP30 KAWNEER STYLE 5

23 REINFORCEMENT PLATES STOREFRONT HARDWARE Trans-Atlantic reinforcement plates are designed to bring extra security and stability to the surface mounted hardware of commercial doors. Plates are intended to be used as a backing plate for 4½" standard butt hinges on most doors. SF-RP951-TUL 951 TUL MODEL Made from highest quality materials Functions as backing plate for butt hinge Increases sag resistance, rigidity Installation for wood, hollow metal and/or aluminum commercial door applications. Plates 3/16" thick Solid individually Silver metallic finish SF-RP124-FZCP 951 A MODEL SF-RP124D-DZCP 951 P MODEL SF-RP124D-2ZCP 951 U MODEL SF-RP124D-3ZCP 951 UJ MODEL SF-RP124D-4ZCP 951 TU MODEL 6

24 DOOR ACCESSORIES STOREFRONT HARDWARE SF-195/196 FLUSH BOLTS Mortise flush bolt for use on all commercial store front and architectural aluminum and glass narrow stile doors. Made for easy installation, replaces most brands of store front flush bolts. Spring loaded lever action Rod extension: ⅞" throw Backset: ⅞" Face plate: 15 /16" and 4 ½" with 5 /32" radius corner Square ½" nylon tip with beveled corners to prevent binding Supplied with nylon keeper and fasteners Finishes: AL, DU Rod length and offset: SF-195: 10" long with ⅛" offset (standard model) SF-196: 10" long with ¼' offset SF-DPB/OPB PULL BARS Push bar length: 33" Pull bar height: 10" Bar width: 3 ¼" Mounting diameter: 1" Projection: 2½" Meant for standard 1¾" doors Attractive design combinations increase usability for people of all heights Finishes: Al, DU SF-OPB Offset Pull Bar SF-DPB Dual Pull Bar 7

25 MORTISE LOCKS NARROW STILE SF-DB3200 Series Deadbolt SF-HL3200 Series Hookbolt SF-DL3200/4700 Series Deadlatch Function Backset Case Depth Latchbolt Deadbolt 31 /32", 1⅛" 1.62" on 31 /32" backset 1.78" on 1⅛" backset ⅝" x 1⅜" with 1⅜" throw Hookbolt 31 /32", 1⅛" 1.62" ⅝" x 1⅜" with 13 /16" throw Deadlatch- DL /32", 1⅛" 1.63" " ⅝" x 1" with ½" throw Deadlatch- DL /32", 1⅛" 1.63" " ⅝" x 1" with ⅝" throw Three functions: deadbolt, hookbolt, deadlatch Available backsets: 31 /32", 1⅛" Face plate: 1" w x 6⅞" L; aluminum Case dimensions: ⅞" w x 6" l x depth (see chart) Non-handed and reversible Deadlatches: zinc alloy latchbolt with Delrin plastic insert, auxiliary bolt zinc diecast, deadlocks latchbolt and prevents manipulation. Finishes: AL/DU FACE PLATES Flat Radius Radius w/ Weather Strip Left Bevel Right Bevel SF-FPDB SF-RPDB SF-WPDBLH/RH SF-BPDBLH SF-BPDBRH SF-FPDL SF-RPDL SF-WPDLLH/RH SF-BPDLLH SF-BPDLRH SF-FPHL SF-RPDB SF-WPDBLH/RH SF-BPDBLH SF-BPDBRH Unless specified, will be supplied with flat face plate All Radius faceplates with weather strips are handed Finishes: AL, DU 8

26 CYLINDERS COMMERCIAL GRADE MORTISE CYLINDERS Mortise Cylinder Thumbturn Cylinder Dummy Cylinder Rim Cylinder ED-RC051 Part Description Keyways Keyed Finishes Cam Packed DL-CYLTA550 DL-CYLTA555 1" Mortise Key Cylinder 5 pin tumbler, solid brass 1" Mortise Key Cylinder 5 pin tumbler, diecast Y-K-S-A-N Y-K-S-A-N KD, KA2, KA50, MK KA2, KA50, MK Al, DU, US3, 26D Al, DU, US3, 26D A, C A 1-2/box 150/case 2/box 150/case KEYWAY CODE S: Schlage C A: Arrow Y: Yale 8 DL-CYLTA560 DL-CYLTA580 DL-CYLTA570 1⅛" Mortise Key Cylinder 6 pin tumbler, solid brass 1¼" Mortise Key Cylinder 6 pin tumbler, solid brass 1" Mortise Thumbturn Cylinder Solid brass Y-K-S-A-N Y-K-S-A-N KD, KA50 KD, KA50 Al, DU, US3, 26D Al, DU, US3, 26D Al, DU, US3, 26D C C A 1/box 150/case 1/box 150/case 1/box 150/case KEYING 2 keys per cylinder KD: Keyed different KA: Keyed alike KA2: Keyed alike; groups of 2 KA50: Keyed alike; groups of 50 DL-CYLTA577 1" Mortise Thumbturn Cylinder Diecast Al, DU, US3, 26D A 1/box 150/case DL-CYLTA595 1" Mortise Dummy Cylinder Solid Brass Al, DU, US3, 26D 1/box 150/case ED-RC051 1" Rim Cylinder Solid Brass S KD, KA US26D, DU 10/box 50/case MORTISE CYLINDER GUARDS For use with mortise cylinder Finishes: AL, DU, US3, 26D DL-HSTMCR Anti-wrench cylinder guard DL-NFSB Cylinder Space Ring 1⅜" x ¼" DL-FSB 1¾" Standard Cylinder Ring DL-SBNRCR Non-recessed ⅜" solid extruded For use with deadlatch Double strike to be used when converting a narrow stile lock to a deadlatch, to cover elongated slot in aluminum frame. SF-DSL1 SINGLE STRIKE SF-DSL2 DOUBLE STRIKE 9

27 PUSH PADDLE SF-EPP496 For use with the SF-DL3200/4700 deadlatch mortise lock. Paddle is four way reversible. Handing can be reversed on cam plug by removing the C-clip and flipping the cam over and reinstalling C-clip. Paddle: extruded aluminum Housing: zinc alloy, black hard coat finish Operating assembly: steel mechanism Specify handing: RH/LH Paddle reversible Standard packing: paddle arm, operating housing, binder posts, cam plug, self adhesive decals, and mounting hardware Finishes: AL, DU Type Operation Use PULL- left hand Outside of left hand reverse door or inside of right hand PUSH- left hand Outside of left hand door or inside of right hand reverse. PULL- right hand Outside of right hand reverse door or inside of left hand. PUSH- right hand Outside of right hand door or inside of left hand reverse LEVER HANDLE SF-LH4560 LEVER For use with our SF-DL3200/4700 deadlatch mortise lock or any other brand of narrow stile mortise deadlatch. Lever is four-way reversible. Handing can be reversed on cam plug by removing C-clip and flipping the cam over and reinstalling C-clip. Cam plug is secured to lever by 2 hardened steel pins. Cam plug locks into deadlatch by use of set screw in deadlatch. Lever: aluminum alloy cast Escutcheon: Aluminum 1⅜" x 4", heavy duty spring mechanism prevents sagging of lever handle Spindle: wrought steel, ¼" square hardened heat treated Handing: reversible, non-handed Operation: turning lever downward will active deadlatch Standard package: Cam plug included, all mounting screws, templates, and installation instructions. Finishes: AL, DU 10

28 Trans-Atlantic Co. Architectural Catalog Tel: Fx:

29

30 FULL MORTISE GEARED CONTINUOUS HINGE Available in full mortise and surface mount 6063 T6 Aluminum alloy, with interlocking extrusions Non-handed design 83" or 95" length Standard duty with 16 thrust type self-lubricating concealed bearings per hinge Heavy duty with 32 thrust type self-lubricating concealed bearings per hinge High degree of security Anodized aluminum after machining Through bolt and machine screws fixing Templated hole patterns 10 year warranty GHMT10 21/32 DH-1183CFM CFM 1-19/32 Mortise type Flush mount Each hinge leaf has an alignment stop ¼" clearance between door and frame 1/4 GHMT24 11/16 3/4 1/16 DH-1183FM2 FM2 1-29/32 Mortise type 1 /16" door offset Door edge guard 5 /16" clearance between door and frame 5/16 Square Edge Clearance 1

31 FULL SURFACE GEARED CONTINUOUS HINGE Available in full mortise and surface mount 6063 T6 Aluminum alloy, with interlocking extrusions Non-handed design 83" or 95" length Standard duty with 16 thrust type self-lubricating concealed bearings per hinge Heavy duty with 32 thrust type self-lubricating concealed bearings per hinge High degree of security Anodized aluminum after machining Through bolt and machine screws fixing Templated hole patterns 10 year warranty 25/32 3-1/16 1-5/8 1-9/32 DH-1183 FULL SURFACE 29/32 1/32 Full surface continuous hinge 1 /32" door panel offset Tamper resistant removable door leaf cover 1 /16" clearance between door and frame 1/16 GHFS30 25/32 19/32 25/32 3-3/16 1-5/32 7/16 DH-1183LF LIMITED FRAME 1-7/16 Full surface continuous hinge For narrow (limited) frame applications Tamper resistant removable door leaf cover 1 /32" clearance between door and frame 1/32 2

32 Trans- Atlantic Roton Select Pemko Standard Duty 83" DH-1183CFM DH-1183 DH-1183FM2 DH-1183LF SL11 SL21 SL24 SL57 FMSLF FS FM FSCP Heavy Duty 83" DH-1183CFMHD DH-1183HD DH-1183FM2HD DH-1183LFHD HD HD HD HD SL11HD SL21HD SL24HD SL57HD FMSLFHD FSHD FMHD FSCPHD Standard Duty 95" DH-1195CFM DH-1195 DH-1195FM2 DH-1195LF SL11 SL21 SL24 SL57 FMSLF FS FM FSCP Heavy Duty 95" DH-1195CFMHD DH-1195HD DH-1195FM2HD DH-1195LFHD HD HD HD HD SL11HD SL21HD SL24HD SL57HD FMSLFHD FSHD FMHD FSCPHD Trans-Atlantic Co. Architectural Catalog Tel: Fx:

33

34 Commercial: Standard and heavy weight Plain and ball bearing Pin: Steel non-rising removable with button tip Type: Full mortise Corner: square corner standard Door: For medium to heavy weight door Frequency: From low to high openings Fasteners: Packed with wood and machine screws Installation: Template screw hole locations Sold as box of 3 COMMERCIAL HINGES ANSI/BHMA Standards Plain Bearing conforms to ANSI A8133 Ball Bearing conforms to ANSI A8112 Heavy Duty Ball Bearing conforms to ANSI A8111 Stainless Steel Plain conforms to ANSI A5133 Stainless Steel Ball conforms to ANSI A5112 Stainless Steel HD Ball conforms to ANSI A5111 Model Finish Base Material Size Bearing Type Thickness DH-BB179SQ3535 US26D Steel 3.5" x 3.5" Ball Bearing Full Mortise.119" DH-PB190SQ454 USP, 3, 4, 10B, 26, 26D Steel 4.5" x 4" Plain Bearing Full Mortise.134" DH-BB179SQ454 USP, 3, 4, 10B, 26, 26D Steel 4.5" x 4" Ball Bearing Full Mortise.134" DH-BB179SQNRP454 USP, 3, 4, 10B, 26, 26D Steel 4.5" x 4" Ball Bearing, NRP Full Mortise.134" DH-PB190SQ4545 USP, 3, 4, 10B, 26, 26D Steel 4.5" x 4.5" Plain Bearing Full Mortise.134" DH-BB179SQ4545 USP, 3, 4, 10B, 26, 26D Steel 4.5" x 4.5" Ball Bearing Full Mortise.134" DH-BB179SQNRP4545 USP, 3, 4, 10B, 26, 26D Steel 4.5" x 4.5" Ball Bearing, NRP Full Mortise.134" DH-SSBB179SQ454 US32D Stainless Steel 4.5" x 4" Ball Bearing Full Mortise.134" DH-SSBB179SQNRP454 US32D Stainless Steel 4.5" x 4" Ball Bearing, NRP Full Mortise.134" DH-SSPB190SQ4545 US32D Stainless Steel 4.5" x 4.5" Plain Bearing Full Mortise.134" DH-SSBB179SQ4545 US32D Stainless Steel 4.5" x 4.5" Ball Bearing Full Mortise.134" DH-SSBB179SQNRP4545 US32D Stainless Steel 4.5" x 4.5" Ball Bearing, NRP Full Mortise.134" DH-BB168SQ4545 US26D Steel 4.5" x 4.5" Ball Bearing Full Mortise, Heavy Weight.180" DH-BB168SQNRP4545 US26D Steel 4.5" x 4.5" Ball Bearing, NRP Full Mortise, Heavy Weight.180" DH-SSBB168SQ4545 US26D Stainless Steel 4.5" x 4.5" Ball Bearing Full Mortise, Heavy Weight.180" DH-SSBB168SQNRP4545 US26D Stainless Steel 4.5" x 4.5" Ball Bearing, NRP Full Mortise, Heavy Weight.190" DH-BB168SQNRP545 US26D Steel 5" x 4.5" Ball Bearing, NRP Full Mortise, Heavy Weight.190" DH-SSBB168SQNRP545 US26D Stainless Steel 5" x 4.5" Ball Bearing, NRP Full Mortise, Heavy Weight.190" Commercial: standard weight Bearing: Ball bearing Pin: Steel non-rising removable with button tip Type: Full mortise 5 /32" radius corner Fasteners: Packed with wood and machine screws 3 hinges per box STOREFRONT HINGES Model Finish Base Material Size Bearing Type Thickness DH-BB179RC532NRP454 US10B, 26D Steel 4.5" x 4" Ball Bearing, NRP Full Mortise.134" DH-SSBB179RC532NRP454 US10B, 32D Stainless Steel 4.5" x 4" Ball Bearing, NRP Full Mortise.134" 1

35 HINGES SPRING HINGES Commercial: Standard weight Single and double acting Corner: square standard ¼" or ⅝" radius corner available on 4" x 4" hinge For medium to heavy weight door Frequency: Low to high openings ANSI A81071F for self closing hinges Packed with wood and machine screws Installation: template screw hole locations Sold as pair Model Finish Base Material Size Bearing Type Thickness DH-UL17944 USP, 3, 4, 10B, 26D Steel 4" x 4" Plain bearing Full mortise.134" DH-UL USP, 3, 4, 10B, 26D Steel 4.5" x 4" Plain bearing Full mortise.134" DH-UL USP, 3, 4, 10B, 26D Steel 4.5" x 4.5" Plain bearing Full mortise.134" DH-5500SA66 USP Steel 6" x 6" Plain bearing Full mortise NA DH USP Steel 6" x 4.5" Plain bearing Full mortise NA DH-5500SA77 USP Steel 7" x 7" Plain bearing Full mortise NA DH-TAN5004 BK, GV, USP, 3 Steel 4" Plain bearing Full mortise, double action NA DH-TAN5005 BK, GV, USP, 3 Steel 5" Plain bearing Full mortise, double action NA DH-TAN5006 BK, GV, USP, 3 Steel 6" Plain bearing Full mortise, double action NA DH-RP REINFORCING HINGE HINGE ACCESSORIES ANSI/BHMA Standards Handed: LH, RH Sold as each Finish: US26D DH-PIN HINGE PIN ANSI/BHMA Standards Sold as each Finish: US4 2

36 Trans-Atlantic Co. Architectural Catalog Tel: Fx:

37

38 DL-LHV SERIES The DL-LHV series cylindrical leverset are designed for use on all heavy duty Grade 1 commercial applications. The LHV series is also ADA compliant and features a free COMMERCIAL LEVER wheeling clutch mechanism option that ensures longevity and security. Solid zinc diecast. Door Thickness: 1¾ - 2 Backset UL Listed: 2¾ - face 1⅛ - 2¼ Cylinder: Schlage C keyway Keying: Schlage 6 pin keyed Key: 2 six pin nickel plated Function: See description page 10 Certification: UL listed ANSI A156.2 Grade 1 Latch: ⅝" projection stainless steel 3 hour UL Bore: 2⅛ hole retrofits all cylindrical locksets Strike: ANSI 1¼ - 4⅞ strike Non-handed and reversible Vandal Resistant: Clutch free wheeling mechanism option Warranty: Lifetime mechanical. 10 year finish. Finish: US26D Meets ADA requirements IC core option The DL-HVB series cylindrical knobset are designed for use on all heavy duty grade 1 commercial applications. They are solid zinc diecast. DL-HVB SERIES COMMERCIAL KNOB Door Thickness: 1¾ - 2 Backset UL Listed: 2¾ - face 1⅛ - 2¼ Cylinder: Schlage C keyway Keying: Schlage 6 pin keyed Key: 2 six pin nickel plated Function: See description page 10 Certification: UL listed ANSI A156.2 Grade 1 Latch: ⅝" projection stainless steel 3 hour UL Bore: 2⅛ hole retrofits all cylindrical locksets Strike: ANSI 1¼ - 4⅞ strike Non-handed and reversible Warranty: Lifetime mechanical. 10 year finish. Finish: US32D IC core option 1

39 DL-LSV SERIES COMMERCIAL LEVER GRADE 2 COMMERCIAL LOCKSETS The DL-LSV series cylindrical leverset are designed for use on all standard duty grade 2 light commercial and residential applications. The LSV series is also ADA compliant. Solid zinc diecast. Sparta Style Saturn Style Door Thickness: 1¾ - 2 Backset: 2¾ - face 1⅛ - 2¼ Cylinder: Schlage C keyway Keying: Schlage 6 pin keyed Key: 2 six pin nickel plated IC core option Function: See description page 9 Certification: UL listed ANSI A156.2 Grade 2 Latch: ½" projection stainless steel 3 hour UL Bore: 2⅛ hole retrofits all cylindrical locksets Strike: ANSI 1¼ - 4⅞ strike EXBS5: Extension for 5" bracket Thrubolts are removable Non-handed and reversible Vandal Resistant: Clutch free wheeling mechanism option Warranty: Lifetime mechanical. 10 year finish. Finishes: US3, 10B, 26D Meets ADA requirements The DL-SVB series cylindrical knobset are designed for use on all standard grade 2 light commercial and residential applications. Solid zinc diecast. DL-SVB SERIES COMMERCIAL KNOB Door Thickness: 1¾ - 2 Backset: 2¾ - face 1⅛ - 2¼ Cylinder: Schlage C keyway Keying: Schlage 6 pin keyed Key: 2 six pin nickel plated Function: See description page 9 Certification: UL listed ANSI A156.2 Grade 1 Latch: ½" projection stainless steel 3 hour UL Bore: 2⅛ hole retrofits all cylindrical locksets Strike: ANSI 1¼ - 4⅞ strike Non-handed and reversible Warranty: Lifetime mechanical. 10 year finish. Finish: US3, 32D IC core option 2

40 GRADE 3 COMMERCIAL LOCKSETS DL-ECL SERIES ECONOMY LEVER The DL-ECL series cylindrical leverset is designed for use on all economy grade 2 residential applications. The ECL series is also ADA compliant. Solid zinc diecast. Door Thickness: 1¾ - 2 Backset: 2¾" face 1-2¼ Shim Filler for 1" latch to 1 ⅛" prep Cylinder: Schlage C keyway Keying: Schlage 5 pin keyed Key: 2 5 pin nickel plated Function: See description page 9 Certification: ANSI and ADA Bore: 2⅛ hole retrofits all cylindrical locksets Come with Non-UL 1⅛ - 2¾ ANSI strike Non-handed and reversible Warranty: Lifetime mechanical. 10 year finish. Finish: US26D Meets ADA requirements DL-ECB SERIES ECONOMY KNOB The DL-ECB series cylindrical knobset are designed for use on all economy grade 3 residential applications. Solid zinc diecast. Door Thickness: 1¾ Backset: Adjustable 2⅜ - 2¾" face 1-2¼ Shim Filler for 1" latch to 1 ⅛" prep Cylinder: Schlage C keyway Keying: Schlage 5 pin keyed Key: 2 5 pin nickel plated Function: See description page 9 Certification: ANSI A Bore: 2⅛ hole retrofits all cylindrical locksets Come with standard T Strike Non-handed and reversible Warranty: Lifetime mechanical. 10 year finish. Finish: US3, 32D 3

41 COMBO ENTRY DL-LSV/SVB LOCKSET Door Thickness: 1¾ - 2 Backset: 2¾" face 1-2¼ Keyed Alike: 1 key operates both lock and deadbolt Schlage 6 "C" keyway DL-SVB53DB251/260: Knob combo lockset DL-LSV53DB751/760: Lever combo lockset Certification: UL Listed ANSI A A156.2 Grade 2 Non-handed and reversible Removable brass cylinders Warranty: Lifetime mechanical. 10 year finish. Finish: US26D, 32D ACCESSORIES COMMERCIAL LOCKSET ACCESSORIES LATCHES FILLER COVER 2⅜" and 2¾" backsets 1⅛" SQ face DL-DLUL: Fire rated Deadlatch DL-SLUL: Fire rated Springlatch DL-ADJ: Adjustable backset Warranty: 1 year Finish: US3, US32D Deadlatch DL-DL238/234 2⅜", 2¾" Backset Springlatch DL-SL238/234 2⅜", 2¾" Backset 2⅜" filler plate DX-161 Finish: USP STRIKES Warranty: 1 year Finish: US3, 32D DL-TA001 1¼" x 4⅞" ASA Strike DL-TA019 1¼" x 2¾" T Strike DL-TA018 1⅛" x 1¼" Dead bolt strike DL-TA020 1¼" x 2¼" Full Lip Strike 4

42 DEADBOLTS COMMERCIAL GRADE DEADBOLTS DL-DB700 SERIES GRADE 2 DEADBOLT DL-DB751 SINGLE CYLINDER DL-DB760 DOUBLE CYLINDER Door Thickness: 1¾ - 2 Backset: UL adjustable 2⅜ - 2¾" Full 1" Throw Deadbolts Cylinder: Schlage C keyway Keying: Schlage 6 pin keyed Key: 2 6 pin nickel plated Strike: TA-019 1⅛ - 2¾ strike Non-handed and reversible DL-DB751: Single cylinder DL-DB760: Double cylinder Matches LHV and LSV series Warranty: 1 year Finish: US3, 26D DL-DB200 SERIES GRADE 3 DEADBOLT Door Thickness: 1¾ - 2 Backset: Adjustable 2⅜ - 2¾" Full 1" Throw Deadbolts ¼" Heavy Gauge Thru-Bolts Cylinder: Schlage C keyway Keying: Schlage 6 pin keyed Key: 2 6 pin nickel plated Matches HVB and SVB Series Non-handed and reversible DL-DB251: Single cylinder DL-DB260: Double cylinder Warranty: 1 year Finish: US3, 32D DL-DB251 SINGLE CYLINDER DL-DB260 DOUBLE CYLINDER 5

43 MORTISE LOCKS DL-ML234 MORTISE LOCKSET Commercial Grade steel case Full 1" throw chrome plated heavy duty deadbolt Door Thickness: 1¾ standard Backset: 2¾ Faceplate: 1¼" x 8" A115.1 Adjustable from flat to ⅛" Bevel both ways Cylinder: Schlage C keyway Keying: Schlage 6 pin keyed Certification: ANSI Strike: Standard ASA strike Finish: US26D DL-ML800 MORTISE LOCKSET Solid brass Mortise lockset Reversible latchbolt and levers Solid brass escutcheons Door Thickness: 1⅜" - 1⅞" Backset: 1¾" narrow stile Faceplate: 1 3 /16" x 1⅞" solid brass Cylinder: Schlage C keyway Keying: Rekeyable Function: Key operated for entry with thumbturn for unlocking and locking. Strike: Standard ASA strike Finish: US3, 15, 26 DL-DX914/920 MORTISE LOCKSET Solid brass Mortise lockset with reversible latchbolt DL-DX914: Spindle fixed to escutcheons DL-DX920: Loose threaded spindle Full 1" throw chrome plated heavy duty deadbolt Solid brass knobs and escutcheon plates Door Thickness: 1¾ standard Backset: 2½ Exterior plate: 2¾" x 10" solid brass Face Plate: 1 1 /16" x 7⅝" Cylinder: Schlage C keyway Keying: 5 Pin tumbler Strike: Standard ASA strike Finish: US3 6

44 MORTISE LOCK HEAVY DUTY MORTISE LOCK DL-DXML HEAVY DUTY MORTISE LOCK The DL-DXML mortise lockset is designed for all heavy duty commercial and industrial applications. This series meets ADA handicap requirements and meets a 3 hour fire listing. Door Thickness: 1¾ Backset: 2¾" Face plate: 1¼" x 8" UL 3 Hour fire Listed Latch 1" Throw Bolt 1⅛" Mortise Cylinder SC6 Schlage "C" 6 pin keyway Sectional and escutcheon trim available Barrier free levers and returns within ½" from door face Handed (must specify LH or RH) yet field reversible Dead or spring latch Levers to be SS or SE Warranty: 3 years Trim Heavy duty commercial; Grade 1 DL-SS: Leverset; solid brass DL-SE: Handleset; solid brass DL-SS Sectional Leverset DL-SE Escutcheon Handleset Meets ADA requirements 7

45 CYLINDERS COMMERCIAL GRADE MORTISE CYLINDERS Mortise Cylinder Thumbturn Cylinder Dummy Cylinder Rim Cylinder Part Description Keyways Keyed Finishes Cam Packed DL-CYLTA550 DL-CYLTA555 DL-CYLTA560 DL-CYLTA580 DL-CYLT570 1" Mortise Key Cylinder 5 pin tumbler, solid brass 1" Mortise Key Cylinder 5 pin tumbler, diecast 1⅛" Mortise Key Cylinder 6 pin tumbler, solid brass 1¼" Mortise Key Cylinder 6 pin tumbler, solid brass 1" Mortise Thumbturn Cylinder Solid brass S-A-Y S-A-Y S-A-Y S-A-Y KD, KA, KA2, KA50 KD, KA, KA2, KA50 KD, KA, KA2, KA50 KD, KA, KA2, KA50 Al, DU, US3, 26D Al, DU, US3, 26D Al, DU, US3, 26D Al, DU, US3, 26D Al, DU, US3, 26D A, C A C C A 1-2/box 150/case 2/box 150/case 1/box 150/case 1/box 150/case 1/box 150/case KEYWAY CODE S: Schlage C A: Arrow Y: Yale 8 KEYING 2 keys per cylinder KD: Keyed different KA: Keyed alike KA2: Keyed alike; groups of 2 KA50: Keyed alike; groups of 50 DL-CYLTA577 1" Mortise Thumbturn Cylinder Diecast Al, DU, US3, 26D A 1/box 150/case DL-CYLTA595 1" Mortise Dummy Cylinder Solid Brass Al, DU, US3, 26D 1/box 150/case ED-RC051 1 Rim Cylinder Solid Brass S KD, KA US26D, DU 10/box 50/case COMMERCIAL GRADE LOCK CYLINDERS Trans-Atlantic 6-pin cylinders are manufactured with strict quality control to insure precise tolerances and smooth operations. Keying service available in keyed alike, master or construction. UNIVERSAL CYLINDERS DL-6GAKD: knob/lever Cyl. 5 Pin Sargent GA Keyed Diff. DL-6SC1KD: knob/lever Cyl. 5 Pin Schlage C(SC1) Keyed Diff DL-6Y1KD: knob/lever Cyl. 5 Pin Yale 8(Y1) Keyed Diff. UNIVERSAL CYLINDERS DL-LC50: G2 Cylinder DL-LC53: G3 Cylinder DL-DC50: Deadbolt Cylinder UNIVERSAL CYLINDERS DL-3GAKD: knob/lever Cyl. 5 Pin Sargent GA Keyed Diff DL-3SC1KD: knob/lever Cyl. 5 Pin Schlage C(SC1) Keyed Diff. DL-3Y1KD: knob/lever Cyl. 5 Pin Yale 8

46 LOCKSET FUNCTIONS 10 PASSAGE F75 Both levers are always free LHV, LSV, ECL HVB, SV-B, ECB 20 EXIT Blank plate on outside. Interior lever always free. LSV 40 PRIVACY F76 Push button locking from interior. Lock can be opened from exterior by rotating interior lever. Safety unlock for emergencies. LHV, LSV, ECL HVB, SVB, ECB 53 ENTRY F109 Push button locking from interior and keyed exterior. LHV, LSV, ECL HVB, SVB, ECB 60 DOUBLE CYLINDER Key in locks unlocks both knobs. LSV 70 CLASSROOM F84 Exterior lever locked or unlocked by key. Interior lever always allows egress. LHV, LSV HVB, SVB, ECB 80 STOREROOM F86 Outside lever is always locked. Key unlatches only. LHV, LSV HVB, SVB, ECB DT DUMMY Dummy trim for one side of door LSV, ECL SVB, ECB 9

47 COMPARISON CHART FUNCTION DORMA HAGER CAL-ROYAL PDQ SCHLAGE PASSAGE DL-LHV10 CL (C) GN-30 GT126 ND10S PRIVACY DL-LHV40 CL (C) GN-20 GT176 ND40S ENTRANCE DL-LHV53 CL (C) GN-00 GT116 ND53PD CLASSROOM DL-LHV70 CL (C) GN-03 GT148 ND70PD STOREROOM DL-LHV80 CL (C) GN-04 GT115 ND80PD FUNCTION DORMA HAGER CAL-ROYAL PDQ SCHLAGE PASSAGE DL-LSV10 CL CSL-30 SP126 AL10S PRIVACY DL-LSV40 CL CSL-20 SP176 AL40S ENTRANCE DL-LSV53 CL CSL-00 SP116 AL53PD CLASSROOM DL-LSV70 CL CSL-03 SP148 AL70PD STOREROOM DL-LSV80 CL CSL-04 SP115 AL80PD DUMMY DL-LSVDT CL CSL-40 SP211 AL170 ORDER SPECIFICATIONS PRODUCT DESCRIPTION AND CODING SERIES FUNCTION FEATURE FINISH DL-LHV 53 CL 26D DX-LSV DX-LHV DX-ECL HV-B SV-B ECB Passage Privacy Entrance Classroom Storefront Dummy Clutch IC Core US3: Polished Brass US10B: Oil Rubbed Bronze 26D: Brushed Chrome US32D: Brushed Stainless Steel All locksets come standard with 2¾ latch, ANSI strike, and SC1 cylinder. IC: Core not included. See Cylinders. Must specify handing, keying preferences, and keyway. Must specify if 2⅜" backset desired 10

48 Trans-Atlantic Co. Architectural Catalog Tel: Fx:

49

50 SECURITY SURFACE BOLTS GH-UL831/UL453 GH-UL831 Concealed mounting Tamper proof UL listed 8" Long 1" throw, 1⅝" projection Finishes: US26D GH-UL453 Surface mounting Tamper proof UL Listed 8" Long 1 1 / 16 " throw, 1⅝" projection Finishes: US26D, ZP FLUSH BOLTS GH-ULSB197 FOOT BOLT GH-1057 GH-ULSB197: UL fire rated GH-197: Extruded Aluminum Non handed ⅝" throw with ⅞" vertical adjustment 12" rod to fit ANSI prep. Spring loaded lever ½" dia. brass bolts Finishes: US3, 26, 26D Foot bolt 6" Operated by pressure of foot on cap Released by pressure on tip Packaged with screws and strike Finishes: Zinc plated SECURITY BOLT GH-835SE BARREL BOLT GH-832BB Steel security bolt Heavy duty Durable silver sprayed epoxy finish 9" with 1½" projection Surface or motise application Polybagged with fasteners Finishes: AL Speficiations 5" and 8" Locking and padlockable bolt Extra heavy duty Rust resistant Heavy zinc plated bolt, 9 /16" dia. Finishes: GV 1

51 CHAIN BOLT GH-1055 Chain bolt 6" Packaged with screws and strike Finishes: Zinc plated CHAIN GUARD GH-1631/DX3700 GH-1631 Adjustable 20"- 30½" Heavy duty commercial Cast brass mounting plates 2 rugged compression springs Vinyl cover Cast brass mounting and plates Finishes: DU, US26D GH-1631 GH-DX3700 Single spring Pack with fasteners Finishes: Zinc Plated GH-3700 HASPS GH-CD575/CD577/600XHH75 GH-CD575 Single flexible Safety hasp 6¼" Zinc plated GH-CD577 Double Flexible Safety hasp 7¾" Zinc plated GH-600XHH75 Garage and utility door Extra heavy hinge hasp 7½" Zinc plated 2

52 DOOR REINFORCER GH-DR45/DR90 MODEL NUMBER SIZE BACKSET DOOR THICKNESS FINISHES 4" Door Reinforcer GH-DRDB101 4½" 2 ⅜" 1 ¾" US3, 32D GH-DRDB102 4½" 2 ¾" 1 ¾" US3, 32D GH-DRDB103 4½" 2 ⅜" 1 ⅜" US3, 32D 9" Door Reinforcer GH-DRLK104 9" 2 ⅜" 1 ¾" US3, 32D GH-DRLK105 9" 2 ¾" 1 ¾" US3, 32D GH-DRLK106 9" 2 ⅜" 1 ⅜" US3, 32D LATCH GUARDS GH-LG109/LG111 GH-LG109 Fits all hollow metal or wood doors Reversible handing Protects cylindrical and mortise locks and guards latch bolt Mounts to door with heavy duty sex bolts Finishes: US26D GH-LG111 Fits narrow line aluminum doors Reverisble handing Tamper-proof Mounts to door with heavy duty sex bolts Finishes: AL, DU DOOR VIEWERS COMMERCIAL DOOR VIEWERS Door viewers are made with safety and durability in mind. Solid cast brass with highly polished optic lenses for extra wide viewing angles. 1¾" thick wood or metal doors Solid cast brass UL: Fire rated Finishes: US3, 26D GH-SB190 9 /16" bore 190' viewing DOOR CHIME GH-DCV01 Doors 1⅛" - 2" thick Available in deluxe: GH-DXDCV01 Two-tone chime 180' viewing angle Finishes: US3, 26D GH-UL /16" bore 200' viewing GH-UL3300 ½" bore 190' viewing 3

53 FLOOR MOUNTED DOOR STOPS Wrought steel and cast brass Suitable for all floor conditions Bumpers constructed from durable rubber Ideal for commercial applications Fasteners: screw packs included Finishes: US3, 26D DOOR STOPS CAST BRASS AND SOLID BRASS WALL MOUNTED DOOR STOPS Wrought steel and cast brass Suitable for all wall conditions Bumpers constructed from durable rubber Fasteners: screw packs included GH-DS406: Available in US26D only Finishes: US3, 26D GH-DS436 Low Dome Door Stop GH-DS438 High Dome Door Stop GH-DS401 Concave Wall Stop GH-DS406 Convex Wall Stop GH-135: 4" Cast alloy door holder GH-1135: 5" Cast alloy door holder GH-235: 4" Solid brass door holder GH-1235: 5" Solid brass door holder GH-380: 5" Door holder GH-6015: 8" Step on door holder Durable rubber tips Polybagged with sheet metal screws Finishes: US3, 26D 6015 Finishes: AL/DU DOOR HOLDERS Drop Down & Step On MAIL SLOTS HEAVY BRASS Exterior Spring Mounting Interlocking flap and frame Packaged with screws GH-HD390: Letter slot 3" x 10" GH-HD490: Magazine slot 3½" x 13" Finishes: US3, 5, 26D Interior Gravity Mounting Gravity flap with ¼" air vent Packaged with screws GH-HD395: Letter slot 3" x 10" GH-HD495: Magazine slot 3½" x 13" Finishes: US3, 5, 26D Interior Trim Plate GH-HD398: Letter slot 3" x 10" GH-HD498: Magazine slot 3½" x 13" Finishes: US3, 5, 26D 4

54 PULL PLATES CLASSIC PULL WITH HANDLE Aluminum, solid brass, stainless steel materials Classic and round pulls 16 guage (.050") thick Mounting screws for 1¾" thick door Packed with sheet metal screws Conforms to ANSI J405 and A117.1 Finishes: AL, US3, 32D PUSH PLATES GH-PP53/54 Aluminum, solid brass, stainless steel materials Mounting screws for 1¾" thick door Packed with sheet metal screws Conforms to ANSI J301 and A117.1 Finishes: AL, US3, 32D GH-PP53 3½" X 15" GH-PP54 4" X 16" GH-PP5310 GH-PP5425 GH-PP5325 3½" X 15" with classic pull 4" X 16" with round pull 3½" X 15" with round pull Meets ADA requirements KICK PLATES COMMERICIAL Aluminum, solid brass, stainless steel materials Stainless steel available 16 guage (.050") thick Kick plates not bevelled Other sizes and finishes available upon request Packed with sheet metal screws Conforms to ANSI J102 and ANSI A117.1 for ADA barrier-free accessibility Brasstone on aluminum available Finishes: AL, BT-AL, US3, 32D GH-KP834 8" x 34" GH-KP " x 34" TEE HANDLE GH-960 Polished chrome die cast handle Heavy duty 4" spindle, 5/16" square Reversible 90 degree turn Keying avilalbe: KA, KD Packaged with 2 keys Finishes: US26 DOOR PULL GH-P531 Heavy cast aluminum door pull 7 ½" x 1 ⅛" 2 ¼" projection Finishes: AL, DU 5

55 HARDWARE BALL CATCHES/ROLLER LATHCES GH-2945 Drive in ball catch Maximum roller projection: 5/16" Latch: 1⅜" Diameter: 1" Strike dimensions: 1⅜" x 2¼" Finishes: US3 GH-2950 Mortise ball catch Maximum roller projection: 5/16" Latch: 1⅜" Diameter: ⅞" Strike dimensions: 1⅜" x 2¼" Finishes: US3 GH-2955 Roller latch Maximum roller projection: 5/16" Latch face: 1" x 1⅜" Strike dimensions: 2" x 1⅜" Finishes: US3, 26 MAGNETIC CATCH GH-CH2935 Cabinet magnetic catch Solid aluminum housing Designed for heavy doors Holding power up to 35 lbs Can be used for double door installation Polybagged with screws Finishes: AL CABINET PULLS GH-CH " cabinet pulls Aluminum 5/16" diameter For cabinet doors ¾" - 1⅜" thick Packed with machine screws Finishes: AL, US26D 6

56 ADA SIGNAGE ADA COMPLIANT SIGNAGE Raised symbols & letters 8" x 8" Pictogram Grade 2 Braille 3/16" thick polystyrene- ABS with UV stabilizer to avoid fading ⅝" raised lettering Finishes: Blue, Black EXIT GH-S441 Men GH-S440 Women GH-S442 Family Restroom GH-EXIT Exit GH-S445 Men Handicap GH-S443 Women Handicap GH-S444 Family Handicap Meets ADA requirements Trans-Atlantic Co. Architectural Catalog Tel: Fx:

57 TM Premium Grab Bars

58 DESIGNER universal elegance series EZGrab s Universal Elegance designer grab bar series offers a variety of styles to add both safety and fashion to any bathroom. Constructed of high-quality, 18-gauge stainless steel, each design is available in both polished chrome and satin stainless steel and in a variety of lengths. Other features include easy-to-install flange mounts to conceal screws and 1-1/4 tubing.

59 DESIGNER universal elegance series majestic curve Size Satin SS Polished SS 18 GBD SSDSC GBD PSDSC 20 GBD SSDSC GBD PSDSC 24 GBD SSDSC GBD PSDSC stylish streamline Size Satin SS Polished SS 18 GBD SSDSA GBD PSDSA 20 GBD SSDSA GBD PSDSA 24 GBD SSDSA GBD PSDSA 2

60 DESIGNER universal elegance series sophisticated accents Size Chrome Accent Bronze Accent 16 GBD WHCH GBD WHBZ 24 GBD WHCH GBD WHBZ simplistic fashion straight Size Satin SS Polished SS 18 GBD SSDSB GBD PSDSB 20 GBD SSDSB GBD PSDSB 24 GBD SSDSB GBD PSDSB 3

61 DESIGNER universal elegance series elegant curve Size Satin SS Polished SS 18 GBD SSDC GBD PSDC 20 GBD SSDC GBD PSDC 24 GBD SSDC GBD PSDC designer shower seat Dark Wood with SS finish SSSW-12-SSDW Folds for easy storage Holds up to 220 pounds 4

62 PREMIUM premium grab bars EZGrab s Premium series provides the ultimate standard in safety and quality for any bathroom. Perfect for both residential and commerical use, EZGrab grab bars are constructed in 18-gauge stainless steel and exceed building codes and ADA criteria. The premium series is available in a variety of lengths and finishes with both concealed- or exposed-screw mounting. exposed screw 1-1/2 tubing Size Part Number 12 GB SSES 16 GB SSES 18 GB SSES 24 GB SSES 32 GB SSES 36 GB SSES concealed mount Size 1-1/4 tubing 1-1/5 tubing 12 GB SSCS GB SSCS 16 GB SSCS GB SSCS 18 GB SSCS GB SSCS 24 GB SSCS GB SSCS 32 GB SSCS GB SSCS 36 GB SSCS GB SSCS 42 GB SSCS GB SSCS 48 GB SSCS GB SSCS 5

63 PREMIUM premium grab bars Size white finish 1-1/2 tubing Part Number 12 GB WHSS 18 GB WHSS 24 GB WHSS 36 GB WHSS Size knurled finish 1-1/2 tubing Part Number 18 GB KSS 24 GB KSS 36 GB KSS 42 GB KSS 6

64 TM Trans-Atlantic Co