Product Catalog. Featuring:

Transcription

1 Product Catalog Featuring:

2

3 Table of Contents Standard Drill Screws... 5 Drilit Drill Screws with Bonded Sealing Washers... 7 Drilit Drill Screws for Wood-to-Metal Applications... 8 Drill Screws with Extended Drilling Capacity... 9 Flo-Seal Sealing SDS for Metal Tapfast Sealing SDS for Metal-to-Wood Low Profile Roof Clip Screws Dril-Flex Structural Drill Screws Bi-Flex 300 Series Stainless Steel Self-Drilling Screws (18-8) Stainless Steel Drill Screws Fab-Lok Fasteners Aggre-Gator 300 Series SS Concrete Anchors UltraCon Concrete/Masonry Fastening System Crete-Flex SS4 Concrete Anchors Con-Flex Large Diameter Concrete Screws HangerMate Threaded Rod Anchoring Systems PanelMate Hurricane Panel Anchoring System Hurricane Hutch Hurricane Storm Panels... 29

4

5 Standard Drill Screws Featuring Drilit forged drill points Drill Screws Self-drilling fasteners eliminate separate drilling and tapping operations for faster, more economical installations. Diameters: #8 to 5/16" Lengths: 1/2" to 4" Head Styles: Hex washer, slotted hex washer, pan and oval Drive Systems: Hex and phillips Material: Carbon steel Finishes: Stalgard coating or zinc plating Eliminates separate drilling and tapping operations Broad selection of sizes Fasteners coated with Stalgard finish typically show no red rust or other base metal corrosion on significant surfaces even after 800 hours of 5% neutral salt spray exposure (per ASTM B117) Cat. No. Description Point Finish Carton Quantity* Carton Weight #8 Diameter. Hex Washer Head HFDA x 1/2 #2 zinc 10, HFDA x 1/2 #2 Stalgard 10, HFDA x 3/4 #2 Stalgard 10, HFDA x 1 #2 Stalgard 5, #8 Diameter. Phillips Pan Head HFDD x 1/2 #2 Stalgard 10, HFDD x 3/4 #2 Stalgard 10, HFDD x 1 #2 Stalgard 8, #10 Diameter. Hex Washer Head HFDB x 1/2 #3 Stalgard 8, HFDB x 5/8 #3 Stalgard 6, HFDB x 3/4 #3 Stalgard 6, HFDC x 3/4 #1 zinc 5, HFFB x 3/4 import #3 zinc 6, HFFB x 3/4 import #3 Stalgard 6, HFDB x 1 #3 Stalgard 5, HFDB x 1 1/2 #3 Stalgard 3, HFDB x 2 #3 Stalgard 2, #12 Diameter, Hex Washer Head HFDC x 3/4 #1 stitch zinc 5, HFDB x 3/4 #3 Stalgard 5, HFDB x 1 #3 Stalgard 4, HFDB x 1-1/4 #3 Stalgard 3, HFDB x 1-1/2 #3 Stalgard 2, HFDB x 2 #3 Stalgard 2, HFDB x 2-1/2 #3 Stalgard 1, HFDB x 3 #3 Stalgard 1, HFDB X 4 #3 Stalgard /4" Diameter, Hex Washer Head HFDB936 1/4-14 x 3/4 #3 Stalgard 3, HFDC930 1/4-14 x 7/8 #1 stitch Stalgard 4, HFDB946 1/4-14 x 1 #3 Stalgard 3, HFDB956 1/4-14 x 1-1/4 #3 Stalgard 2, HFDB961 1/4-14 x 1--1/2 #3 Stalgard 2, HFDB971 1/4-14 x 2 #3 Stalgard 1, HFDB976 1/4-14 x 2-1/2 #3 Stalgard 1, HFDB981 1/4-14 x 3 #3 Stalgard HFDB983 1/4-14 x 4 #3 Stalgard HFDB984 1/4-20 x 1 #3 Stalgard 2, *Also available in boxes of To order or for more information, call Hurripanel at or visit

6 Standard Drill Screws Featuring Drilltite dual-processed drill points Drilltite dual-processed points (cold-formed and precision-milled) provide unequalled sharpness and fast, positive drilling. Diameters: 5/16" Lengths: 1 to 1-1/2" Head Styles: Hex washer Drive Systems: Hex Material: Carbon steel Finishes: Stalgard coating Larger diameter provides increased shear strength Stalgard coating provides 800 hours of salt spray resistance (per ASTM B117) #3 point drills thicknesses up to.220" Cat. No. Description Point Finish Carton Quantity Carton Weight 5/16 Hex Washer Head HFDB991 5/16-18 x 1 #3 Stalgard 1, HFDB994 5/16-18 x 1-1/4 #3 Stalgard 1, HFDB998 5/16-18 x 1-1/2 #3 Stalgard 1, Drill Point Type Selection Guide Nominal Screw Sizes Thread Dia. Decimal #6.140 #7.150 #8.160 #9.180 # # # /4.240 # Standard Sheet Metal Sizes Gage Decimal top material to be drilled bottom material to be drilled.500".400".300".200".100".000" Diameter Point Type TOTAL THICKNESS TO BE DRILLED.062" 1.110" top material to be drilled void or insulation bottom material to be drilled bottom material to be drilled pre-drilled or pre-punched top material #12 1/4" #10 #12 #10 #12 1/4" #12 1/4" #12 1/4" #12 1/4" 2.175".150" 3.210".312".375" TOTAL THICKNESS TO BE DRILLED 5 To order or for more information, call Hurripanel at or visit

7 Drilit Drill Screws with Bonded Sealing Washers Economical fasteners for applications requiring a weather-tight seal Drill Screws This economical line of drill screws provides a weather-tight seal for protection against the elements. Diameters: #10 to 1/4" Lengths: 3/4" to 4" Head Styles: Hex washer Drive System: Hex Point Types: #1 (stitch) and #3 Material: Carbon steel Finish: Stalgard coating EPDM washer material is UVand heat-resistant for long-term protection against leakage Stalgard coating provides 800 hours of salt spray resistance (per ASTM B117) Description Point Finish #10 Diameter Hex Washer Head Catalog No. Quantity Weight Catalog No. Quantity Weight x 3/4 #3 zinc HFFW525P 1, HFFW525 3, x 3/4 #3 Stalgard HFHL111P 1, HFHL111 3, x 1-1/2 #3 Stalgard HFHL146P 1, HFHL146 2, #12 Diameter Hex Washer Head x 3/4 #3 Stalgard HFHL165P 1, HFHL165 3, x 1 #3 Stalgard HFHL181P 1, HFHL181 2, x 1-1/4 #3 Stalgard HFHL235P 1, HFHL235 2, x 1-1/2 #3 Stalgard HFHL276P 1, HFHL276 2, x 2 #3 Stalgard HFHL280 1, x 2-1/2 #3 Stalgard HFHL285 1, x 3 #3 Stalgard HFHL x 4 #3 Stalgard HFHL x 7/8 #4 Stalgard HFHL351 4, x 1-1/4 #5 Stalgard HFHL411 2, x 1-1/2 #4.5 Stalgard HFHL431 2, x 1-1/2 #5 Stalgard HFHL446 2, x 2 #5 Stalgard HFHL466 1, x 3 #5 Stalgard HFHL486 1, /4" Diameter Hex Washer Head 1/4-14 x 3/4 #3 Stalgard HFHL515P 1, HFHL515 2, /4-14 x 7/8 #1 Stitch Stalgard HFHK315P 1, HFHK315 2, /4-14 x 1 #3 Stalgard HFHL530P 1, HFHL530 2, /4-14 x 1-1/4 #3 Stalgard HFHL556 1, /4-14 x 1-1/2 #3 Stalgard HFHL577 1, /4-14 x 2 #3 Stalgard HFHL585 1, /4-14 x 2-1/2 #3 Stalgard HFHL595 1, /4-14 x 3 #3 Stalgard HFHL /4-14 x 4 #3 Stalgard HFHL To order or for more information, call Hurripanel at or visit

8 Drilit Drill Screws for Wood-to-Metal Applications For efficient fastening of wood or composite materials to steel Drill Screws These self-drilling fasteners are designed to eliminate separate drilling and tapping operations for faster installation in wood-to-metal applications. Diameters: #8 to 1/4" Lengths: 3/4" to 3-15/16" Head Styles: Flat and wafer Drive System: Phillips Point Styles: Types 2, 3 and 4; some with wings Material: Carbon steel Finishes: Gray Stalgard coating or phosphate Eliminates costly pre-drilling of wood Broad selection of sizes Can be used with steel up to 5/16" thick Gray Stalgard coating provides 1000 hours of salt spray resistance and was developed for use with ACQ-treated lumber with retention levels no higher than.25 PCF Cat. No. Description Point Finish Carton Quantity Carton Weight #8 Diameter, Phillips Flat Head w/long Pilot Point HFDK x 1-15/16 #3 zinc phos 4, #10 Diameter, Phillips Wafer Head HFDM x 3/4 #3 Grey Stalgard 8, HFDM x 1 #3 Grey Stalgard 6, HFDM x 1-1/4 #3 Grey Stalgard 5, HFDT x 1-7/16 #3 Grey Stalgard 4, HFDM x 1-1/2 #3 Grey Stalgard 3, HFDM x 1-13/16 #2 Grey Stalgard 2, #11 Diameter, Phillips Wafer Head HFDT x 2-15/16 #4 Grey Stalgard 1, HFDT x 3-7/16 #4 Grey Stalgard 1, HFDT x 3-15/16 #4 Grey Stalgard #12 Diameter, Phillips Wafer Head HFDT x 1-3/4 #4 Grey Stalgard 2, #12 Diameter, Phillips Flat Head HFDT x 2-1/4 #4 w/wings Grey Stalgard 2, HFDT x 2-3/4 #4 w/wings Grey Stalgard 1, HFDJ x 3-5/8 #2 Grey Stalgard 1, /4" Diameter, Phillips Flat Head HFDT442 1/4-20 x 3 #4 Grey Stalgard 1, To order or for more information, call Hurripanel at or visit

9 Drill Screws with Extended Drilling Capacity Specially-designed drill points handle the toughest applications This line of heavy-duty drill screws is designed for steel applications up to 1/2" thick. Diameters: #12 and 1/4" Lengths: 7/8" to 8" Head Style: Hex washer Drive System: Hex Material: Carbon steel Finish: Silver Stalgard coating Several parts available with bonded sealing washer Points are either Drilit forged or Drilltite precision milled points Stalgard coating provides 800 hours of salt spray resistance (per ASTM B117) Drill Screws With Drilit Points Cat. No. Description Point Finish Carton Quantity Carton Weight #12 Diameter Decking Fasteners & Drill Screws for Steel Thicknesses of.175" to.500"; No Washer HFDC x 7/8 #4 Stalgard 4, HFDC x 1-1/4 #4.5 Stalgard 3, HFDC x 1-1/4 #5 Stalgard 4, HFDC x 1-1/2 #4.5 Stalgard 2, HFDC x 1-1/2 #5 Stalgard 2, HFDC x 2 #5 Stalgard 2, HFDC x 3 #5 Stalgard 1, #1/4 Diameter Decking Fasteners for Thicknesses of.175" to.500", No Washer HFFC886 1/4-14 x 5 #5 Stalgard HFFC896 1/4-14 x 6 #5 Stalgard HFFC926 1/4-14 x 8 #5 Stalgard #12 Diameter Decking Fasteners & Drill Screws for Steel Thicknesses of.175" to.500", With Bonded Sealing Washer HFHL x 7/8 #4 Stalgard 4, HFHL x 1-1/4 #4.5 Stalgard 3, HFHL x 1-1/4 #5 Stalgard 2, HFHL x 1-1/2 #4.5 Stalgard 2, HFHL x 1-1/2 #5 Stalgard 2, HFHL x 2 #5 Stalgard 1, HFHL x 3 #5 Stalgard 1, With Drilltite Points Cat. No. Description Point Finish Carton Quantity Carton Weight #12 Diameter Decking Fasteners & Drill Screws for Steel Thicknesses of.175" to.500"; No Washer HFCC x 1-1/4 #5 Drilltite Stalgard 4, HFCC x 1-1/2 #5 Drilltite Stalgard 2, HFCW x 1-1/2 #5 Drilltite Stalgard 2, HFCC x 2 #5 Drilltite Stalgard 2, HFCC x 3 #5 Drilltite Stalgard 1, #12 Diameter Decking Fasteners & Drill Screws for Steel Thicknesses of.175" to.500"; With Bonded Sealing Washer HFCW x 1-1/4 #5 Drilltite Stalgard 2, HFCW x 2 #5 Drilltite Stalgard 1, HFCW x 3 #5 Drilltite Stalgard 1, * es of 1000 also available. To order or for more information, call Hurripanel at or visit

10 Flo-Seal Sealing SDS for Metal For self-drilling applications requiring a weather-tight seal Special underhead design and EPDM sealing washer combine to provide a custom, weather-tight seal. Diameters: #10 to 1/4" Lengths: 3/4" to 2" Head Style: Hex washer (5/16" across flats) Drive System: Hex Material: Carbon steel Finish: Stalgard coating EPDM washer is UV- and heatresistant for long-term protection against leakage Reliable and consistent sealing even in under-tightened, over-tightened, or angle-driven installations Stalgard coating provides 800 hours of salt spray resistance (per ASTM B117) Description Point Finish Cat. No. Quantity Weight Carton Cat. No. Carton Quantity Carton Weight #10 Diameter Hex Washer Head x 3/4 #2 Stalgard HFHB105P 1, HFHB105 3, x 1-1/2 #2 Stalgard HFHB135P 1, HFHB135 2, #12 Diameter Hex Washer Head x 3/4 #2 Stalgard HFHB150P 1, HFHB150 3, x 1 #2 Stalgard HFHB180P 1, HFHB180 2, x 1-1/4 #2 Stalgard HFHB235P 1, HFHB235 2, x 1-1/2 #2 Stalgard HFHB295P 1, HFHB295 2, /4" Diameter Hex Washer Head 1/4-14 x 7/8 #1 Stalgard HFHB515P 1, HFHB515 2, Features and Benefits of the Flo-Seal Fastener Sealing System Fastener head engineered to control the flow of flat the special sealing washer, ensuring sealing in outer bearing critical areas skirt surface Provides reliable and consistent sealing even in sealing under-tightened, over-tightened or angle-driven washer installations Ensures long-term protection against leakage inner compression ring Compensates for different installation situations and techniques Flo-Seal sealing system with 9/16" O.D. EPDM one-piece integral washer Type #1 #3 drill point Drill Screw with Flo Seal System 10 To order or for more information, call Hurripanel at or visit

11 Tapfast Sealing SDS for Metal-to-Wood For use in metal-to-wood applications High-performance fastener designed specifically for attaching light-gage metal panels (18 ga. max.) to wood frame structures. Unique Flo Seal washer design provides enhanced sealing capabilities. Size: #10 Lengths: 1" to 3" Head Style: 1/4" hex Drive System: Hex Point: Formed Type S cutting point Material: Carbon steel Finish: Stalgard coating Incorporates Flo-Seal sealing washer for a water-tight seal Large diameter increases performance Easily penetrates multiple panel thicknesses Stalgard coating provides 800 hours of salt spray resistance (per ASTM B117) Cat. No. Description Point Finish Carton Quantity Carton Weight #10 Diameter Fastener with Flo-Seal Hex Washer Head HFHH x 1 modified S point Stalgard 3, HFHH x 1-1/2 modified S point Stalgard 2, HFHH x 2 modified S point Stalgard 1, HFHH x 2-1/2 modified S point Stalgard 1, HFHH x 3 modified S point Stalgard Features and Benefits of the Flo-Seal Fastener Sealing System Fastener head engineered to control the flow of the special sealing washer, ensuring sealing in critical areas Provides reliable and consistent sealing even in under-tightened, over-tightened or angle-driven installations Ensures long-term protection against leakage Compensates for different installation situations and techniques outer skirt sealing washer flat bearing surface inner compression ring Flo-Seal sealing system with 9/16" O.D. EPDM one-piece integral washer modified S point TapFast Fastener with Flo Seal System To order or for more information, call Hurripanel at or visit 11

12 Low Profile Roof Clip Screws Low-profile head design for wood and steel applications The efficiency of self-drilling fasteners and the aethetics of an inobtrusive head are ideal for attaching metal roof clips. Diameters: #10 to #12" Lengths: 1" to 2" Head Styles: Pancake Drive Systems: Phillips Material: Carbon steel Finishes: Silver or gray Stalgard Coating Eliminates separate drilling and tapping operations Pancake head improves aesthetics Stalgard corrosion-resistant coating provides 800 hours of salt spray resistance (per ASTM B117) Cat. No. Description Point Finish Carton Quantity Carton Weight (lbs) For Steel HFDO x 1 #3 Stalgard HFDO X 1-1/2 #3 Stalgard HFDO x 2 #3 Stalgard HFDO x 1 #3 Stalgard For Wood/Thin Steel HFTA x 1 S Grey Stalgard HFTA X 1-1/2 S Grey Stalgard HFTA x 2 S Grey Stalgard HFTA x 1 S Grey Stalgard To order or for more information, call Hurripanel at or visit

13 Dril-Flex Structural Drill Screws For use in structural applications Precision-engineered and dual heat treated drill screws provide the strength, ductility and resistance to embrittlement needed for critical applications. Diameters: #10 to 5/16" Lengths: 3/4" to 3-3/8" Drive Systems: Hex and phillips Point Types: #3, #4 and #5 Material: Alloy steel Finish: Silver Stalgard coating Head Marking: Elco logo in a raised circle High-hardness points and lead threads for drilling and tapping Lower-hardness in load-bearing threads for ductility Virtually immune to delayed embrittlement failures Stalgard coating provides 800 hours of salt spray resistance (per ASTM B117) Description Drive/Head Style Point Finish Cat. No. Qty. Weight Cat No. Qty. Weight x 3/4 hex washer #3 Stalgard HFAF430P HFAF x 1-1/4 phillips wafer #3 Stalgard HFBL530P HFBL x 7/8 hex washer #3 Stalgard HFAF621P HFAF x 1 hex washer #3 Stalgard HFAF641P HFAF x 1-1/2 hex washer #3 Stalgard HFAF681P HFAF x 2 hex washer #3 Stalgard HFAF690P HFAF x 1 phillips undercut flat #3 Stalgard HFBL215P HFBL x 1-3/4 hex washer #5 Stalgard HFAF755P HFAF /4-14 x 1 hex washer #3 Stalgard HFAF816P HFAF /4-14 x 1-1/2 hex washer #3 Stalgard HFAF841P HFAF /4-14 x 2 hex washer #3 Stalgard HFAF846P HFAF /4-20 x 1-1/8 hex washer #4 Stalgard HFAF865P HFAF /4-20 x 1-1/2 hex washer #4 Stalgard HFAF876P HFAF /4-20 x 1-1/2 hex washer #5 Stalgard HFAF888P HFAF /4-20 x 2 hex washer #4 Stalgard HFAF886P HFAF /4-20 x 2-1/2 hex washer #4 Stalgard HFAF890P HFAF /4-20 x 3-3/8 hex washer #4 Stalgard HFAF900P HFAF /16-24 x 1-1/2 hex washer #3 Stalgard HFAF960P HFAF /16-24 x 2 hex washer #3 Stalgard HFAF970P HFAF To order or for more information, call Hurripanel at or visit 13

14 Bi-Flex 300 Series Stainless Steel Self-Drilling Screws Bi-metal technology provides outstanding corrosion resistance and long service life Bi-Flex fasteners provide the corrosion resistance of 300 series stainless steel and the efficiency of drillscrews. Diameters: #10 to 1/4" Lengths: 3/4" to 2-1/2" Head Styles: Hex washer, flat and undercut flat Drive Systems: Hex and phillips Point Types: #2, #3 and #5 Material: Hardened steel tapping threads and point fused onto an 18-8 stainless steel shank and head Finish: Silver Stalgard GB (Galvanic Barrier) coating High strength, ductility and reliability Virtually immune to delayed embrittlement failures Greater galvanic compatibility in dissimilar metal applications involving aluminum Quickly drill and tap into steel or aluminum up to 1/2" thick High in-place value over the life of structures, components and systems Size Length Drive System Point Size Max. Drilling Capacity Qty. Cat. No. Weight Qty. Cat. No. Wt. Hex Washer Head /4" 5/16" hex 2.110" 6000 HFAJ110B HFAJ110P " 5/16" hex 2.140" 4000 HFAJ185B HFAJ185P /2" 5/16" hex 2.140" 2500 HFAJ215B HFAJ215P " 5/16" hex 2.140" 2000 HFAJ240B HFAJ240P " 5/16" hex 3.210" 4000 HFAJ190B HFAJ190P /2" 5/16" hex 3.210" 2500 HFAJ220B HFAJ220P /2" 5/16" hex 3.210" 1500 HFAJ260B HFAJ260P " 5/16" hex 5.500" 2000 HFAJ340B HFAJ340P 1.3 1/4-14 1" 3/8" hex 2.175" 3000 HFAJ415B HFAJ415P 2.0 1/ /2" 3/8" hex 2.175" 2000 HFAJ430B HFAJ430P 1.5 1/4-14 2" 3/8" hex 2.175" 1500 HFAJ445B HFAJ445P 1.3 1/4-20 1" 3/8" hex 3.312" 2500 HFAJ540B HFAJ540P 2.0 1/ /2" 3/8" hex 3.312" 2000 HFAJ580B HFAJ580P 1.6 1/4-20 2" 3/8" hex 3.312" 1500 HFAJ610B HFAJ610P 1.3 1/ /2" 3/8" hex 3.312" 1000 HFAJ640B HFAJ640P 1.8 1/4-20 2" 3/8" hex 5.500" 1500 HFAJ615B HFAJ615P 1.3 Flat Head Reamers w/wings /2" #2 phillips 3.140" 3500 HFBN140B HFBN140P /16" #3 phillips 5.500" 1500 HFBN345B HFBN345P 1.1 1/ /16" #3 phillips 5.500" 1000 HFBN645B HFBN645P 1.4 Flat Undercut Head " #3 phillips 2.140" 4000 HFBN200B HFBN200P /2" #3 phillips 2.500" 2500 HFBN240B HFBN240P To order or for more information, call Hurripanel at or visit

15 302 (18-8) Stainless Steel Drill Screws For fastening to aluminum when corrosion is a primary concern Stainless steel drill screws provide strength and corrosion resistance in a variety of aluminum applications. Diameters: #10 to 1/4" Lengths: 1/2" to 1-1/2" Head Style: Hex washer Drive System: Hex Point Types: #3 and #4 Material: 302 stainless steel Finish: Silver top coat Provides a very high level of corrosion resistance Silver top coat finish protects application from galvanic reaction with fastener Head marked with a 3 for easy identification Description Point Finish Cat. No. Qty. Wt. Cat. No. Qty. Wt. #8 Diameter Hex Washer Head 8-18 x 1/2 #2 silver top coat HFAH230M HFAH230 10, X 3/4 #2 silver top coat HFAH250M HFAH250 8, #10 Diameter Hex Washer Head x 1/2 #3 silver top coat HFAH430M HFAH430 8, x 3/4 #3 silver top coat HFAH445M HFAH445 6, x 1 #3 silver top coat HFAH460M HFAH460 4, #12 Diameter Hex Washer Head x 3/4 #3 silver top coat HFAH630M HFAH630 5, x 1 #3 silver top coat HFAH650M HFAH650 5, X 1-1/4 #3 silver top coat HFAH660M HFAH660 3, x 1-1/2 #3 silver top coat HFAH680M HFAH680 2, x 2 #3 silver top coat HFAH690M HFAH690 4, x 2-1/2 #3 silver top coat HFAH715M HFAH715 3, x 3 #3 silver top coat HFAH725M HFAH725 2, /4" Diameter Hex Washer Head 1/4-14 x 3/4 #3 silver top coat HFAH800M HFAH800 3, /4-14 x 1 #3 silver top coat HFAH820M HFAH820 3, /4-14 x 1-1/2 #3 silver top coat HFAH835M HFAH835 2, /4-20 x 1 #4 silver top coat HFAH870M HFAH870 3, /4-20 x 1-1/2 #4 silver top coat HFAH880M HFAH880 2, Note: Best performance in aluminum applications and stainless steel applications. To order or for more information, call Hurripanel at or visit 15

16 Fab-Lok Fasteners To maintain panel integrity in high-stress and high-vibration environments Vibration, either from inside or outside a building, can make ordinary fasteners loosen and back out. Fab-Lok fasteners combine a slotted aluminum sleeve and fastener to provide high resistance to vibration loosening. Excellent for use with insulated panels. Drive System: Hex Materials: Low carbon steel or 300 series stainless steel screw with aluminum sleeve or hard steel screw with steel sleeve Finish: Zinc Hex washer head machine screw assembled to a slotted aluminum sleeve and EPDM sealing washer After tightening, clamping tines remain in place even if screw is removed Greater joint integrity Penetrating Length Grip Range Cat. No. Quantity Weight Cat. No. Quantity Weight Aluminum Sleeves and Carbon Steel Screws 1.373".062".250" HFZJ100B HFZJ100P ".250".500" HFZJ120B HFZJ120P ".500".750" HFZJ140B HFZJ140P Aluminum Sleeves and 18-8 Stainless Screws 1.373".062".250" HFZJ210B HFZJ210P ".250".500" HFZJ230B HFZJ230P ".500".750" HFZJ250B HFZJ250P Fab-Lok HD Steel Sleeves and Carbon Steel Screws 1.373".062".250" HFZJ300B HFZJ300P Cat. No. Quantity Weight Fab-Lok Holding Sleeve* HFZJ *Fab-Lok fastener is inserted into a 5/16" hole (hole size is not critical) then installed with a power driver equipped with a Fab-Lok holding sleeve, with a socket designed to fit DeWalt tools DW969K-2, DW968K-2, DW267, DW268 and DW To order or for more information, call Hurripanel at or visit

17 Aggre-Gator 300 Series SS Concrete Anchors The corrosion resistance of 300 series stainless steel in a threaded concrete anchor Aggre-gator anchors provide unmatched corrosion resistance in demanding applications, such as those in coastal or wet areas. Diameter: 1/4" Lengths: 1-3/4" to 4" Head Styles: Hex washer and TrimFit flat Drive Systems: Hex and phillips Material: 300 (18-8) stainless steel head and shank with fused and hardened steel tapping threads and gimlet point Finish: Silver Stalgard GB (Galvanic Barrier) coating Long service life high in-place value over life of structure High strength and ductility Offers greater galvanic compatibility in dissimilar metal applications involving aluminum Thread profile provides quick cutting and stability during installation Installs with 3/16" masonry drill bits Length Drive System Finish 1/4 Diameter, Hex Washer Head Cat. No. Qty. Wt. Shipper** Cat No. Shipper Qty.** Shipper Wt. Cat. No. 1-3/4" 5/16" hex Silver Stalgard GB HFML HFML315SP HFML315B /4" 5/16" hex Silver Stalgard GB HFML HFML325SP HFML325B /4" 5/16" hex Silver Stalgard GB HFML HFML335SP HFML335B /4" 5/16" hex Silver Stalgard GB HFML HFML345SP HFML345B " 5/16" hex Silver Stalgard GB HFML HFML365SP HFML365B /4 Diameter, TrimFit Flat Head 1-3/4" #3 phillips Silver Stalgard GB HFMM HFMM310SP HFMM310B /4" #3 phillips Silver Stalgard GB HFMM HFMM320SP HFMM320B /4" #3 phillips Silver Stalgard GB HFMM HFMM330SP HFMM330B /4" #3 phillips Silver Stalgard GB HFMM HFMM340SP HFMM340B " #3 phillips Silver Stalgard GB HFMM HFMM360SP HFMM360B Qty. Wt. * Standard packaging: 50 anchors and 1 tanged masonry bit per box. **Shippers contain 6 boxes of 50 anchors and each box contains a drill bit. To order or for more information, call Hurripanel at or visit 17

18 UltraCon Concrete/Masonry Fastening System Offers optimal performance in concrete, brick and hollow block applications UltraCon fasteners are available in a variety of styles to meet your needs. Diameters: 3/16" to 5/16" Head Styles: Hex, flat, hex flange, hex washer, TrimFit hex and TrimFit flat Drive Systems: Hex and phillips Material: Carbon steel Finishes: Blue, silver, and white Stalgard coating standard; bronze available upon request Installs quickly when using Elco installation tools When all three elements of the system are used, consistent performance and maximum pull out strengths can be realized Stalgard coating provides 800 hours of salt spray resistance (per ASTM B117) 3/16" and 1/4" UltraCon Anchors NOTE: 3/16" and 1/4" UltraCon anchors boxes of 100 contain 1 tanged drill bit. quantities do not contain a drill bit. Shippers (Quantity of 600) are 6 boxes of 100 anchors with a drill bit in each box. Blue Stalgard Finish Silver Stalgard Finish White Stalgard Finish Description Qty. Cat. No. Cat. No. Cat. No. Weight Hex Washer Head 5000 HFLE /16 x 1-1/4 100 HFLE P HFLE HFLE /16 x 1-3/4 100 HFLE P HFLE HFLE /16 x 2-1/4 100 HFLE P HFLE HFLE /16 x 2-3/4 100 HFLE P HFLE HFLE /16 x 3-1/4 100 HFLE P HFLE HFLE /16 x 3-3/4 100 HFLE P HFLE HFLE /16 x HFLE P HFLE HFLE /4 x HFLE P HFLE HFLE405 HFLD /4 x 1-1/4 100 HFLE P HFLE HFLE415 HFLG341 HFLD /4 x 1-3/4 100 HFLE P HFLG P HFLD P HFLE HFLG HFLD To order or for more information, call Hurripanel at or visit

19 UltraCon Concrete/Masonry Fastening System Offers optimal performance in concrete, brick and hollow block applications Blue Stalgard Finish Silver Stalgard Finish White Stalgard Finish Description Qty. Cat. No. Cat. No. Cat. No. Weight Hex Washer Head, continued 1500 HFLE425 HFLG371 HFLD /4 x 2-1/4 100 HFLE P HFLG P HFLD P HFLE HFLG HFLD HFLE435 HFLG401 HFLD /4 x 2-3/4 100 HFLE P HFLG P HFLD P HFLE HFLG HFLD HFLE445 HFLG431 HFLD /4 x 3-1/4 100 HFLE P HFLG P HFLD P HFLE HFLG HFLD HFLE455 HFLG /4 x 3-3/4 100 HFLE P HFLE HFLE /4 x HFLE P HFLE /4 x HFLE HFLE /4 x HFLE HFLE Phillips Flat Head 5000 HFLF305 HFLG521 HFLD /16 x 1-1/4 100 HFLF P HFLG P HFLD P HFLF HFLG HFLD HFLF315 HFLG551 HFLD /16 x 1-3/4 100 HFLF P HFLG P HFLD P HFLF HFLG HFLD HFLF325 HFLG581 HFLD /16 x 2-1/4 100 HFLF P HFLG P HFLD P HFLF HFLG HFLD HFLF335 HFLG611 HFLD /16 x 2-3/4 100 HFLF P HFLG P HFLD P HFLF HFLG HFLD HFLF345 HFLG641 HFLD /16 x 3-1/4 100 HFLF P HFLG P HFLD P HFLF HFLG HFLD HFLF355 HFLG671 HFLD /16 x 3-3/4 100 HFLF P HFLG P HFLD P HFLF HFLG HFLD HFLF365 HFLD /16 x HFLF P HFLD P HFLF HFLD HFLF400 HFLG731 HFLD /4 x 1-1/4 100 HFLF P HFLG P HFLD P HFLF HFLG HFLD HFLF410 HFLG761 HFLD /4 x 1-3/4 100 HFLF P HFLG P HFLD P HFLF HFLG HFLD To order or for more information, call Hurripanel at or visit 19

20 UltraCon Concrete/Masonry Fastening System Offers optimal performance in concrete, brick and hollow block applications Blue Stalgard Finish Silver Stalgard Finish White Stalgard Finish Description Qty. Cat. No. Cat. No. Cat. No. Weight Phillips Flat Head, continued 1500 HFLF420 HFLG791 HFLD /4 x 2-1/4 100 HFLF P HFLG P HFLD P HFLF HFLG HFLD HFLF430 HFLG821 HFLD /4 x 2-3/4 100 HFLF P HFLG P HFLD P HFLF HFLG HFLD HFLF440 HFLG851 HFLD /4 x 3-1/4 100 HFLF P HFLG P HFLD P HFLF HFLG HFLD HFLF450 HFLG881 HFLD /4 x 3-3/4 100 HFLF P HFLG P HFLD P HFLF HFLG HFLD HFLF /4 x HFLF P HFLF /4 x HFLF HFLF /4 x HFLF HFLF Hex Flange Head 1/4 x 1-3/4 1/4 x 2-1/4 1/4 x 2-3/4 1/4 x 3-1/ HFLC145 HFLD HFLC P HFLD P HFLC HFLD HFLC151 HFLD HFLC P HFLD P HFLC HFLD HFLC160 HFLD HFLC P HFLD P HFLC HFLD HFLC170 HFLD HFLC P HFLD P HFLC HFLD TrimFit Phillips Flat Head 1/4 x 1-3/ HFLG771 HFLD /4 x 2-1/ HFLG801 HFLD /4 x 2-3/ HFLG831 HFLD /4 x 3-1/ HFLG861 HFLD /4 x 3-3/4 500 HFLG891 HFLD /4 x HFLG921 HFLD To order or for more information, call Hurripanel at or visit

21 UltraCon Concrete/Masonry Fastening System Offers optimal performance in concrete, brick and hollow block applications 5/16" Diameter UltraCon Anchors Cat. No. Qty. Weight Cat. No. Qty. Weight Size Finish TrimFit Hex Head 5/16 x 1-3/4 Silver Stalgard HFLG482P HFLG482M /16 x 2-1/4 Silver Stalgard HFLG487P HFLG487M /16 x 2-3/4 Silver Stalgard HFLG492P HFLG492M /16 x 3-1/4 Silver Stalgard HFLG497P HFLG497M /16 x 3-3/4 Silver Stalgard HFLG502P HFLG502M Hex Flange Head 5/16 x 1-1/4 Silver Stalgard HFHLG476P HFHLG476M /16 x 1-3/4 Silver Stalgard HFLG481P HFLG481M /16 x 2-1/4 Silver Stalgard HFLG486P HFLG486M /16 x 2-3/4 Silver Stalgard HFLG491P HFLG491M /16 x 3-1/4 Silver Stalgard HFLG496P HFLG496M /16 x 3-3/4 Silver Stalgard HFLG501P HFLG501M /16 x 4 Silver Stalgard HFLG506P HFLG506M /16 x 5 Silver Stalgard HFLG511P HFLG511M Phillips Flat Head 5/16 x 2-1/4 Silver Stalgard HFLG941P HFLG941M /16 x 2-3/4 Silver Stalgard HFLG948P HFLG948M /16 x 3-1/4 Silver Stalgard HFLG960P HFLG960M /16 x 4 Silver Stalgard HFLG979P HFLG979M /16 x 5 Silver Stalgard HFLG992P HFLG992M /16 x 6 Silver Stalgard HFLG998P HFLG998M TrimFit Flat Head 5/16 x 1-1/4 Silver Stalgard HFLG925P HFLG925M /16 x 1-3/4 Silver Stalgard HFLG935P HFLG935M /16 x 2-1/4 Silver Stalgard HFLG945P HFLG945M /16 x 2-3/4 Silver Stalgard HFLG955P HFLG955M /16 x 3-1/4 Silver Stalgard HFLG965P HFLG965M /16 x 3-3/4 Silver Stalgard HFLG972P HFLG972M /16 x 4 Silver Stalgard HFLG976P HFLG976M /16 x 5 Silver Stalgard HFLG991P HFLG991M To order or for more information, call Hurripanel at or visit 21

22 UltraCon Concrete/Masonry Fastening System Offers optimal performance in concrete, brick and hollow block applications Installation Tools Kits Cat. No. Description Installs HFLP100 HFLP 150 HfLP250 HFLP Tool Specialty Tool Economy Tool 516 Drive Tool all sizes and styles of UltraCon anchors 1/4" diameter hex washer head UltraCon anchors, up through 1-3/4" in length UltraCon anchors up to 4" in length 5/16" anchors up to 6" long Contents/ Replacement Parts Description HFLY 100 Drill Adapter HFLY 110 Drive Sleeve Assembly HFLY 120 5/16" Hex Driver Magnetic HFLY 130 1/4" Hex Socket for 3/16" Anchor HFLY 160 Phillips Adapter HFLY 140 #2 Phillips Bit HFLY 150 #3 Phillips Bit HFLY 220 1/8" Hex Key HFLY 210 Set Screw 1/4-28 HFLY 170 Drive Sleeve Assembly for 5" & 6" Anchors HFLP 155 Drive Sleeve HFLT 630 Hex-collared Carbide-Tipped SDS Bit HFLY 100 Drill Adapter HFLY 100 Drill Adapter HFLY 140 #2 Phillips Bit HFLY 150 #3 Phillips Bit HFLY 220 1/8" Hex Key HFLY 125 1/4" Hex Drive Adapter HFLY Drill Bit Adapter HFLY 450 #3 Phillips Bit HFLY 410 6" Drive Sleeve Intended for use with hammer drills Tanged Drill Bits For use with hammer drill guns For Anchor Dia. 3/16" 1/4" 5/16" Bit Cat. No. Bit Dia. Bit Length For Anchor Lengths up to HFLT300* 5/32" 3-1/2" 1-3/4" HFLT310* 5/32" 4-1/2" 2-3/4" HFLT320* 5/32" 5-1/2" 4" HFLT405* 3/16" 3-1/2" 1-3/4" HFLT415* 3/16" 4-1/2" 2-3/4" HFLT425* 3/16" 5-1/2" 4" HFLT435* 3/16" 6-1/2" 5" HFLT445* 3/16" 7-1/2" 6" HFLT460** 1/4" 4-1/2" 2-1/4" HFLT465** 1/4" 5-1/2" 4" HFLT475** 1/4" 7-1/2" 6" Hex-collared SDS Carbide-tipped Drill Bits For use with rotary hammer drills For Anchor Dia. 3/16" 1/4" 5/16" Bit Cat. No. Bit Dia. Bit Overall Length Bit Functional Length HFLT535 5/32" 5" 2" HFLT555 5/32" 7" 4" HFLT630 3/16" 5" 2" HFLT650 3/16" 7" 4" HFLT680 1/4 6"-3/4" 4" HFLT690 1/4" 9-1/4" 6-1/2" For use with rotary hammer drills and 1000 tool or specialty installation tools. one per tube, 10 tubes per shipper. *Sold in tubes containing 10 bits each. ** Sold in tubes containing 5 bits each. 22 To order or for more information, call Hurripanel at or visit

23 Crete-Flex SS4 Concrete Anchors For masonry attachments requiring enhanced corrosion resistance Crete-Flex 410 stainless steel masonry fasteners provide high shear values, corrosion resistance and ductility for outstanding performance. Diameters*: #14 and 3/16" Lengths: 1-1/4" to 6" Thread Style: heavy duty Head Styles: Hex washer, hex flange and flat Drive Systems: Hex and phillips Material: 410 stainless steel Finish: Silver Stalgard coating Special heat treatment to protect inherent corrosion resistance of the 410 stainless steel material Stalgard coating provides 1600 hours of salt spray resistance Larger.201 root diameter provides exceptionally high shear values Length Drive System Cat. No. Qty. Wt. Cat. No. Qty. Wt. Drill Bit Size #14 Diameter Screw, Hex Washer Head 1-1/4" 5/16" Hex HFMF HFMB /32 x 4-1/2" 1-3/4" 5/16" Hex HFMF HFMB /32 x 4-1/2" 2 1/4" 5/16" Hex HFMF HFMB /32 x 4-1/2" 2-3/4" 5/16" Hex HFMF HFMB /32 x 4-1/2" 3-1/4" 5/16" Hex HFMF HFMB /32 x 5-1/2" 3-3/4" 5/16" Hex HFMF HFMB /32 x 5-1/2" 4" 5/16" Hex HFMF HFMB /32 x 5-1/2" 5" 5/16" Hex HFMF HFMB /32 x 7-1/2" 6" 5/16" Hex HFMF HFMB /32 x 7-1/2" #14 Diameter Screw, Hex Flange Head (5/8" washer O.D.) 1-3/4" 5/16" Hex HFMF HFMB /32 x 4-1/2" 2-1/4" 5/16" Hex HPMF HFMB /32 x 4-1/2" #14 Diameter Screw, Phillips Flat Head 1-1/4" #3 Phillips HFMF HFMB /32 x 4-1/2" 1-3/4" #3 Phillips HFMF HFMB /32 x 4-1/2" 2-1/4" #3 Phillips HFMF HFMB /32 x 4-1/2" 2-3/4" #3 Phillips HFMF HFMB /32 x 4-1/2" 3-1/4" #3 Phillips HFMF HFMB /32 x 5-1/2" 3-3/4" #3 Phillips HFMF HFMB /32 x 5-1/2" 4" #3 Phillips HFMF HFMB /32 x 5-1/2" 5" #3 Phillips HFMF HFMB /32 x 7-1/2" 6" #3 Phillips HFMF HFMB /32 x 7-1/2" Masonry Drill Bits Catalog No. Description Max. Crete-Flex Anchor Length Weight Per Bit HFMC100 7/32 x 4-1/2" Tanged 2-3/4".0625 HFMC110 7/32 x 5-1/2" Tanged 4".0625 HFMC115 7/32 x 7-1/2" Tanged 6".0625 HFMC120 7/32 x 5-1/2" Hex-shanked SDS 2-1/4".0625 HFMC130 7/32 x 7" Hex-shanked SDS 4".125 HFMC140 7/32 x 6 x 8-1/4" SDS** 5".125 HFMC150 7/32 x 9 x 11" SDS** 6".125 * Fsstener Diameter Information: O.D. = #14 (.268"); I.D. =.201" ** HFMC140 and HFMC150 drill bits are NOT shanked To order or for more information, call Hurripanel at or visit 23

24 Con-Flex Large Diameter Concrete Anchors Enhanced ductility allows use in demanding exterior applications Con-Flex masonry screws are engineered to provide high pull-out and shear values with virtual immunity to brittle failures. Diameters: Oversized 3/8" and 1/2" diameters Material: Alloy steel Head Style: Hex washer head with locking serrations Thread Style: Double-lead Finish: Stalgard corrosionresistant coating Tensile Yield: 92,000 KSI min. (Grade 5); Tensile Ultimate: 120,000 KSI min. (Grade 5) Flex Technology heat treatment provides virtual immunity to brittle failures Locking serrations under the head provide back out resistance Hardened tip ensures efficient tapping into concrete Head markings (Elco logo and length in inches) allow easy inspection Install with standard ANSI bits Packaging Catalog No. Size Drive System Finish Drill Bit Size Quantity Weight 3/8" Diameter Screw Anchors, Hex Washer Head with Locking Serrations HFMR215B 3/8 X 2-1/2" 9/16" Hex Washer Silver Stalgard 3/8" HFMR235B 3/8 X 3" 9/16" Hex Washer Silver Stalgard 3/8" HFMR255B 3/8 X 4" 9/16" Hex Washer Silver Stalgard 3/8" HFMR265B 3/8 X 5" 9/16" Hex Washer Silver Stalgard 3/8" HFBMR295B 3/8 X 5" 9/16" Hex Washer Bronze Stalgard 3/8" HFWMR295B 3/8 X 5" 9/16" Hex Washer White Stalgard 3/8" HFMR285B 3/8 X 7-1/2" 9/16" Hex Washer Silver Stalgard 3/8" HFBMR285B 3/8 X 7-1/2" 9/16" Hex Washer Bronze Stalgard 3/8" HFWMR288B 3/8 X 7-1/2" 9/16" Hex Washer White Stalgard 3/8" /2" Diameter Screw Anchors, Hex Washer Head with Locking Serrations HFMR320B 1/2 X 2-1/2" 3/4" Hex Washer Silver Stalgard 7/16" HFMR340B 1/2 X 3" 3/4" Hex Washer Silver Stalgard 7/16" HFMR360B 1/2 X 4" 3/4" Hex Washer Silver Stalgard 7/16" HFMR370B 1/2 X 5" 3/4" Hex Washer Silver Stalgard 7/16" HFMR380B 1/2 X 6" 3/4" Hex Washer Silver Stalgard 7/16" Regular Packaging Catalog No. Size Drive System Finish Drill Bit Size Quantity Weight 3/8" Diameter Screw Anchors, Hex Washer Head with Locking Serrations HFMR215 3/8 X 2-1/2" 9/16" Hex Washer Silver Stalgard 3/8" 50 2 HFMR235 3/8 X 3" 9/16" Hex Washer Silver Stalgard 3/8" 50 2 HFMR255 3/8 X 4" 9/16" Hex Washer Silver Stalgard 3/8" 50 2 HFMR265 3/8 X 5" 9/16" Hex Washer Silver Stalgard 3/8" 25 1 HFMR266 3/8 X 5" 9/16" Hex Washer Bronze Stalgard 3/8" 25 1 HFMR268 3/8 X 5" 9/16" Hex Washer White Stalgard 3/8" 25 1 HFMR285 3/8 X 7-1/2" 9/16" Hex Washer Silver Stalgard 3/8" 25 1 HFBMR286 3/8 X 7-1/2" 9/16" Hex Washer Bronze Stalgard 3/8" 25 1 HFWMR288 3/8 X 7-1/2" 9/16" Hex Washer White Stalgard 3/8" /2" Diameter Screw Anchors, Hex Washer Head with Locking Serrations HFMR320 1/2 X 2-1/2" 3/4" Hex Washer Silver Stalgard 7/16" 50 2 HFMR340 1/2 X 3" 3/4" Hex Washer Silver Stalgard 7/16" 50 2 HFMR360 1/2 X 4" 3/4" Hex Washer Silver Stalgard 7/16" 50 2 HFMR370 1/2 X 5" 3/4" Hex Washer Silver Stalgard 7/16" 25 1 HFMR380 1/2 X 6" 3/4" Hex Washer Silver Stalgard 7/16" To order or for more information, call Hurripanel at or visit

25 HangerMate Threaded Rod Anchoring Systems Anchoring system for threaded rod components HangerMate anchors accept 1/4-20 and 3/8-16 threaded rod and components of piping systems for attachment to steel, masonry, and wood. Sizes: For use with 1/4-20 and 3/8-16 threaded rod; adaptor installs 1/2" threaded rod Lengths: 1-1/8" to 3" Drive System: Hex Material: Carbon steel Finish: Plating per ASTM B633 Type II Class 12 Eases installation of sprinkler systems, strut, HVAC, cable trays and various piping systems Self-drilling points for steel; in wood applications, no pre-drilling is required Many styles UL listed and/or FM approved Installs with HangerMate Drive for most applications Description Rod Size Steel Thickness Cat. No. Quantity Weight Cat. No. Quantity Weight Steel Applications Vertical Mount End-Drilled Head 1/4-20 X 1 #3 point 1/ HFZG HFZG160B /4-20 X 1 #2 point 3/ HFZG HFZG450B /4-20 X 1 #3 point 3/ HFZG HFZG470B /4-20 X 1 #3 point w/nuts 3/ HFZG HFZG471B /4-20 X 1-1/2 #3 point 3/ HFZG HFZG490B /4-20 X 1-1/2 #3 point w/nuts 3/ HFZG HFZG491B /4-20 X 2 #3 point 3/ HFZG HFZG530B /4-20 X 3 #3 point 3/ HFZG HFZG540B /4-20 X 1-1/2 #5 point 3/ HFZG HFZG510B /4-20 X 1-1/2 #5 point w/nuts 3/ HFZG HFZG511B For Thin Steel Applications (HangerMate LG Anchors) 1/4-20 collapsing insert 1/ ga..187" HFZG HFZG610B /4-20 X 1; use with EZG610 3/ ga..187" HFZG HFZG580B /4-20 X 1; use with EZG610 3/ ga..187" HFZG HFZG590B /4-20 X 1; use with EZG610 3/ ga..187" HFZG HFZG600B Steel Applications Horizontal Mount Cross-Drilled Head 1/4-20 X 1 #3 point 1/ HFZH HFZH155B /4-20 X 1 #3 point 3/ HFZH HFZH475B /4-20 X 1 #3 point w/nuts 3/ HFZH HFZH476B /4-20 X 1-1/2 #3 point 3/ HFZH HFZH495B /4-20 X 1-1/2 #3 point w/nuts 3/ HFZH HFZH496B /4-20 X 1-1/2 #5 point 3/ HFZH HFZH515B /4-20 X 1-1/2 #5 point w/nuts 3/ HFZH HFZH516B /4-20 X 2 #3 point 3/ HFZH HFZH535B Notes: is 6 boxes of 50 anchors. Insert HFZG610 can be used alone to install 1/4-20 threaded rod, or with HFZG580, HFZG590 or HFZG600 to install 3/8-16 threaded rod. To order or for more information, call Hurripanel at or visit 25

26 HangerMate Threaded Rod Anchoring Systems Anchoring system for threaded rod components Description Rod Size Cat. No. Quantity Weight Cat. No. Quantity Weight Wood Applications Vertical Mount End-Drilled Head 5/16 X 2-1/4 1/4-20 HFZG HFZG315B /16 X 2-1/4 3/8-16 HFZG HFZG650B /16 X 3 3/8-16 HFZG HFZG670B Horizontal Mount Cross-Drilled Head 5/16 X 2-1/4 1/4-20 HFZH HFZH320B /16 X 2-1/4 3/8-16 HFZH HFZH665B Concrete Applications Vertical Mount End-Drilled Head 5/16X2-1/4 1/4-20 HFZG HFZG365B /16X2-1/4 3/8-16 HFZG HFZG730B Horizontal Mount Cross-Drilled Head 5/16 X 2-1/4 1/4-20 HFZH HFZH370B /16 X 2-1/4 3/8-16 HFZH HFZH735B Steel, Wood or Concrete (HangerMate MP anchors) Vertical Mount End-Drilled Head 1/4-10 X 2 1/4-20 HFZG HFZG910B /4-10 X 2 3/8-16 HFZG HFZG930B Horizontal Mount Cross-Drilled Head 1/4-10 X 2 3/8-16 HFZH HFZH935B All Materials Adapter for Hanging 1/2" Rod HangerMate Installation Tools 1/2-13 HFZE HFZE270B Notes: is 6 boxes of 50 anchors. Simply install any 3/8" HangerMate anchor as required, then thread EZE270 adapter into it. Catalog No. Description Weight HFZE215 Drive Socket (for steel and wood applications) 0.1 HFZE220 Drive Sleeve (for concrete applications) 0.8 HFZE240 Drill Bit Adapter and Hey Key Kit 0.1 HFZE320 Collared 25/64 Drill Bit (for HangerMate LG applications) 0.8 HFZE340 ANSI 1/4" Tanged Drill Bit for Hammer Drills 0.1 HFZE350 ANSI 1/4" SDS Drill Bit for Rotary Hammer Drills 0.1 HFZE290 Setting Tool for EZG580/EZG590/EZG600/EZG610 components To order or for more information, call Hurripanel at or visit

27 PanelMate Storm Panel Anchoring System The quick, economical method to secure hurricane protection PanelMate fasteners offer one-time installation the anchors stay in place, ready for even faster and easier panel mounting as the next storm approaches. Styles: Double-ended studs (accept standard 1/4 20 nuts); anchor with internally-threaded head (accepts standard 1/4-20 hardware); hex fasteners and internally-threaded inserts Thread Style: Oversized V notched threads (.270 O.D.) Materials: Carbon steel and 18-8 stainless steel Finish: Carbon steel designs have Stalgard coating Fasteners accept standard 1/4 20 hardware Provide exceptional pull-out and shear values Provide outstanding corrosion resistance (withstands hours in salt spray testing per ASTM B117 standards) Tested to tough Miami-Dade hurricane standards Description 1/4-20 Stud Thread Length Anchor Length PanelMate Pro Anchors Double-ended studs with stop collar 7/8" 2-1/4" 2" (accept standard 1/4 20 nuts) 7/8" 3-1/4" 3" PanelMate TVAS Pro Anchors Description 7/8" 4-1/2" 3" 7/8" 7-3/8" 3" Overall Anchor Length Thread Length Material Finish Cat No. Wt. Ea. Kit* Cat No. PanelMate Female ID (Internal Drive) Anchors carbon steel fastener with Stalgard 2-5/8" 1-3/4" stainless steel head K25CBY K25CY 2.2 stainless steel none K25SBY K25SY 2.2 Internally-threaded carbon steel fastener with Stalgard head (accepts 3-1/4" 2" stainless steel head K26CBY K26CY 2.2 standard 1/4-20 stainless steel none K26SBY K26SY 2.2 wingbolts) carbon steel fastener with Stalgard 4-1/2" 2" stainless steel head K27CBY K27CY 2.3 stainless steel none K27SBY K27SY 2.3 carbon steel fastener with Stalgard 5-1/2" 2" stainless steel head K28CBY K28CY 2.4 stainless steel none K28SBY K28SY 2.4 PanelMate TVAS Female Anchors carbon steel fastener with Stalgard 7-3/8" 3" stainless steel head K29CBY 0.08 K29CY 2.5 stainless steel none K29SBY 0.08 K29SY 2.5 * Male PanelMate Kits 2-5/8" through 4-1/2" lengths: 25 anchors, 25 wing nuts, 25 plastic caps, one driver, and one drill bit. 5-1/2" through 7-3/8" lengths: 25 anchors, 25 wing nuts, 25 plastic caps, and one driver. ** Female PanelMate Kits: 25 anchors, 25 plastic threaded plugs. Through-Veneer Anchoring System Wt./ Kit carbon steel Stalgard K17CBY K17CY 1.4 stainless steel none K17SBY K17SY 1.4 carbon steel Stalgard K18CBY K18CY 1.5 stainless steel none K18SBY K18SY 1.5 carbon steel Stalgard K19CBY K19CY 1.8 stainless steel none K19SBY K19SY 1.8 carbon steel Stalgard K21CBY 0.08 K21CY 2.5 stainless steel none K21SBY 0.08 K21SY Thread Length Material Finish Cat No. Wt. Ea. Kit** Cat No. Wt./ Kit To order or for more information, call Hurripanel at or visit 27

28 PanelMate Storm Panel Anchoring System The quick, economical method to secure hurricane protection Description PanelMate S Inserts Internally-threaded insert PanelMate L Inserts Internally-threaded insert Overall Anchor Length Thread Length Material Finish Cat. No. Wt. Ea. Kit*** Cat. No. Kit Wt. 1-3/8" NA carbon steel Stalgard K23CBY 0.1 K23CY /8" NA carbon steel Stalgard K24CBY K24CY 0.3 Description Overall Anchor Length PanelMate TVAS Hex Anchors Hex Head Screw 7-3/8" (below head) Thread Length Material Finish Through-Veneer Anchoring System ***Insert Kit contains 25 inserts and 25 plastic plugs 3" carbon steel Collapsible Steel Sleeves for 26 ga..187" Metal Applications 1/4-20 collapsing insert carbon NA NA steel Accessories ed Cat. No. Qty. Wt. Cat No. Qty Wt. Stalgard K30CY K30CBY Stalgard HFZJ300PPM HFZJ300B Description Use Cat. No. Qty. Weight Plastic Threaded Plug (1/4-20) Protect female anchors after panels are removed K1Y Wing Nuts Connect panels to male anchors K2Y Cover male anchors after panels Plastic Caps K3Y are removed PLYLOX Connectors for 5/8" or Mount 1/2" plywood without K13Y mm Material nails, screws or adhesives 1" Stainless Steel Sealing Washers Increase anchor performance KSSY /4-20 x 1-1/4" Bolts with Adjustable Wing Nuts Attach panels to female anchors (bolt depth is adjustable) K10BY K10Y Panel Connector, Aluminum Unions: Set of 3 Join panels over large openings K5Y Panel Connector: White Aluminum, 10' Length K5HY Installation Tools & Drill Bits Cat. No. Description Weight Per Each D3Y ARTU SDS Carbide-tipped Masonry Drill Bit: 3/16" X 4" 0.25 D4Y ARTU SDS Carbide-Tipped Masonry Drill Bit: 3/16" X 6" 0.25 D5Y ARTU SDS Carbide-Tipped Masonry Drill Bit: 3/16" X 9" 0.25 D6Y ARTU Tungsten-Carbide Masonry Drill Bit: 7/16" X 6" 0.25 HFZE290PM Tool for Setting Collapsible Sleeves 0.80 K11Y Quick Change Adapter 0.38 K6Y PanelMate Female Anchor Driver 0.30 K7Y PanelMate Male Anchor Driver, Modified 3/16" 0.30 KNWD Wing Nut Driver To order or for more information, call Hurripanel at or visit

29 Hurricane/Tornado Hutch Corrugated Plastic Hurricane Storm Panels The Hurricane Hutch is specifically designed to withstand debris strikes associated with nature s fiercest storms while protecting your valuables. Its 7 cubic feet interior can hold your most precious items you have to leave behind during an evacuation such as photos, heirlooms, china, jewelry, important personal documents, computers, etc. The Hurricane Hutch is the ONLY safe ever to be tested by Texas Tech University Wind Science and Engineering Research Center. It passed all tests, including include the Dade County test, debris strikes associated with CAT-5 and F-4 tornadoes, which simulates 250 mph debris strikes. Made entirely from 10-gauge steel plate, this unit is proudly hand-welded in our USA facility. This handsome unit is bolted down into your concrete slab using ten 1/2" x 5" bolts, the same ones used in U.S. military applications and rated to withstand over 100,000 pounds of pulling pressure. Panels can be custom-cut for an additional price. (Note: Custom-cut panels must be pre-paid. No returns. Tolerance of 1/8" of customer-provided measurements.) Hurripanel 16mm Polypropylene Hurricane Storm Panels Heavy-duty corrugated polypropylene panel meets tough hurricane standards. White opaque panel allows some light to pass through. Model W L Item No. 4' 8' Uncut Sizes: Polygal SG 9' 8' P9 8' 10' Approvals: TDI Report #SHU-129 (Storm Depot of America) Miami-Dade NOA: exp 0927/2012 Polygal Clear Polycarbonate Hurricane Storm Panels These heavy-duty clear plastic panels let the light in while protecting your windows and doors. Meet tough hurricane standards. Bronze/ice panels also available. Uncut sizes: Model W L Item No. 8' Polygal SG 4' 12' 16' 24' 8' R4 6' 12' 16' 24' R6 Approvals: TDI Report #SHU-142 and SHU-155 (Polygal, Inc.) GE Lexan Hurricane Storm Panels These high-quality, heavy-duty clear panels let the light in while protecting your windows and doors.they can stay up seasonally without your business or home appearing closed or boarded up. Meet tough hurricane standards. Panels mount only on top and bottom no reinforcements or side bolting required. XL-10SP: 27", 33", 39", 45", or 51" widths Item No.: G17SP Approvals: TDI Report #SHU-131 (Lookout Shutters, Inc.); Int l Code Council: 2109 ICC Legacy Report; Miami-Dade NOA: , and XL-10: 17.5" x 102" Item No.: G17 To order or for more information, call Hurripanel at or visit 29