PRODUCT INFORMATION. ASTM B633,SC1, Type III (Fe/Zn 5) Rod/Anchor Diameter

Transcription

1 PRODUCT INFORMATION Internally Threaded Expansion Anchor PRODUCT DESCRIPTION The is an all-steel, machine bolt anchor available in carbon steel. It can be used in solid concrete, hard stone, and solid block base materials. The is specifically designed to be easier to fully set during installation as a benefit to the user. GENERAL APPLICATIONS AND USES Suspending Conduit Fire Sprinkler Cable Trays and Strut Concrete Formwork Pipe Supports Suspended Lighting FEATURES AND ENEFITS + Installs with reduced effort compared to traditional drop in style anchors. + Can be installed using the Powers manual setting tool or Powers System with a hammer-drill + Setting indicater makes identification of properly set anchors easy (when installed using the Smart Tool and Smart it). + Internally threaded anchor for easy bolt removability and service work TESTING, APPROVALS AND LISTINGS FM Global (Factory Mutual) - Report No (see ordering information) Underwriters Laboratory (UL Listed) File No. EX289 (N) (see ordering information) GUIDE SPECIFICATIONS CSI Divisions: 0-Concrete Anchoring and 0090-Metal Fastenings. Dropin anchors shall be as supplied by Powers Fasteners, Inc., rewster, NY. MATERIAL SPECIFICATIONS Anchor ody AISI 008 Plug AISI 008 Zinc Plating ASTM 6,SC, Type III (Fe/Zn ) Anchor (Rod) Size /4" /8" /2" /8" /4" Nominal Outside Diameter d () ANSI Drill it Size, d bit () /8 /2 /8 7/8 Maximum Tightening Torque, T max (ft.-lbs.) Anchor Component INSTALLATION SPECIFICATIONS Rod/Anchor Diameter Thread Size (UNC) /4-20 /8-6 /2- /8- /4-0 Thread Depth () 7/6 /8 /6 /6 /8 Anchor Length l, h v () 9/6 2 2 /2 /6 Nomenclature Carbon Steel d = Diameter of anchor dbit = Diameter of drill bit h = ase material thickness. The minimum value of h should be.h v or m (whichever is greater) hv = Minimum embedment depth l = Overall length of anchor Tmax = Maximum tightening torque Anchor prior to installation SECTION CONTENTS Page No. General Information... Material Specifications... Installation Specifications... Performance Data... Design Criteria... Ordering Information... 6 THREAD VERSION UNC Coarse Thread ANCHOR MATERIALS Zinc Plated Carbon Steel ROD/ANCHOR SIZE RANGE (TYP.) /4" to /4" diameter UNC Coarse Thread SUITALE ASE MATERIALS Normal-weight Concrete STANDARD DROP-IN SMART DI+ DROP-IN Easier to Set More Expansion Expansion Indicator When properly set, anchor indicator will leave blue paint in reccessed cavities Canada: (90) or (4) Powers USA: (800) or (94) 2-600

2 PRODUCT INFORMATION INSTALLATION SPECIFICATIONS (Continued) Manual Installation. Drill a hole into the base material to the depth of embedment required. The tolerances of the drill bit used must meet the requirements of ANSI Standard 22.. Use any ANSI Standard carbide drill bit. 2. low the hole clean of dust and other materials. Insert the anchor into the hole and, if necessary tap flush with surface. Smart Installation. Drill a hole into the base material to the depth of embedment required using the appropriate Powers Smart it. The tolerances of the drill bit used must meet the requirements of ANSI Standard 22.. Standard installation with a Smart it may result in the anchor being slightly subset from the surface. Minimum published embedment depths must be achieved by using the shoulder of the Smart it as a guide. 2. Using a Powers manual setting tool specifically, set the anchor by driving the tool with a sufficient number of hammer blows until the shoulder of the tool is seated against the anchor. Anchor will not hold allowable loads required if shoulder of Powers manual setting tool does not seat against anchor low the hole clean of dust and other materials. Insert the anchor into the hole and, if necessary, tap flush with the surface.. Slide the appropriate Powers Smart Tool over the Smart it used to drill the hole and twist counterclockwise to lock the setting tool onto the bit If using a fixture, position it, insert bolt and tighten so as not to exceed the maximum tighting torque. Most overhead applications utilize threaded rod. Minimum thread engagement should be at least one anchor diameter. 4. Once attached, insert the tip of the setting tool into the anchor and drive the internal plug fully using the rotation with hammer mode of the SDS+ drill (see table below for suggested tools). 4. For proper installation, the shoulder of the setting tool must come briefly in full contact with the resulting in the blue indicator paint being removed from the raised top of the anchor. The paint will remain in the recessed portion of the top indicating full expansion If using a fixture, position it, insert the bolt and tighten so as not to exceed the maximum tightening torque. Most overhead applications utilize threaded rod. Minimum thread engagement should be at least one anchor diameter. Recommended SDS+ Rotary Hammer Drill Specification (for with Smart Installation) Diameter /4 /8 /2 Concrete Strength (psi) 2,00 6,00 2,00 6,00 2,00 6,00 Rated Tool Impact Energy Suggested Range* (ft-lbs) Recommended Rotary Hammer Tool Part Number DH24PF DH24PF DH24PF DH28PC * Local concrete conditions and rotary hammer impact efficiency vary greatly. Please verify that the tool impact energy is sufficient to fully set the internal plug of the prior to using the system. Powers USA: (800) or (94) Canada: (90) or (4)

3 PRODUCT INFORMATION PERFORMANCE DATA Ultimate Load Capacities for in Normal-Weight Concrete,2 Nominal Anchor Diameter d Minimum Embedment Depth Minimum Concrete Compressive Strength - f'c (psi) 2,00,000 4,000 6,000. Tabulated load values are for anchors installed in concrete. Concrete compressive strength must be at the specified minimum at the time of installation. 2. Ultimate load capacities must be reduced by a minimum safety factor of 4.0 or greater to determine allowable working load. /4,00 2,49,90 2,0,6 2,0,90 2,620 /8 9/6,98 4,60 2,27 4,60 2,80 4,7 4,000,0 /2 2,60 7,70,8 7,280 4,90 7,0 4,9 7,9 /8 2 /2,76 9,80 6,290 0,80 7, 2,70 9,40 6,2 /4 /6 6,200 6,0 7,20 6,70 9,6 7,97 4,04 20,460 Allowable Load Capacities for in Normal-Weight Concrete,2, Nominal Anchor Diameter d Minimum Embedment Depth Minimum Concrete Compressive Strength - f'c (psi) 2,00,000 4,000 6,000. Allowable load capacities listed are calculated using and applied safety factor of Linear interpolation may be used to determine allowable loads for intermediate compressive strengths.. Allowable load capacities are multiplied by reduction factors found in the Design Criteria section when anchor spacing or edge distances are less than critical distances. / /8 9/6 496,040 68,090 72,88,000,87 / ,792 9,820,047,876,2,988 /8 2 /2,44 2,462,72 2,70,8,77 2,7 4, /4 /6,0 4,027,80 4,82 2,9 4,49,, DESIGN CRITERIA (ALLOWALE STRESS DESIGN) Combined Loading For anchors loaded in both shear and tension, the combination of loads should be proportioned as follows: Nu Vu Nu Vu ( Nn ) + ( Vn ) or ( Nn ) + ( Vn ) Where: Nu = Applied Service Load Nn = Allowable Load Vu = Applied Service Load Vn = Allowable Load NOTE: Allowable load values found in the performance data tables are multiplied by reduction factors when anchor spacing or edge distances are less than critical distances. Linear interpolation is allowed for intermediate anchor spacing and edge distances between critical and minimum distances.when an anchor is affected by both reduced spacing and edge distance, the spacing and edge reduction factors must be combined (multiplied). Multiple reduction factors for anchor spacing and edge distance may be required depending on the anchor group configuration. Canada: (90) or (4) Powers USA: (800) or (94) 2-600

4 PRODUCT INFORMATION DESIGN CRITERIA (ALLOWALE STRESS DESIGN) Load Adjustment Factors for Normal-Weight Concrete Spacing Distance - Dia. (in) /4" /8" /2" /8" /4" h ef 9/6 2 2 /2 /6 s cr 4 /2 6 7 /2 9 /2 s min /2 2 /8 /4 4 /4 Spacing Distance (inches) /2 / / / / / / / / /2.00 Spacing Distance (inches) Spacing Reduction Factors - Dia. (in) /4" /8" /2" /8" /4" h ef 9/6 2 2 /2 /6 s cr 6 7 /2 9 /2 s min /2 2 /8 /4 4 /4 /2 / / / / / / / / /2.00 Powers USA: (800) or (94) Canada: (90) or (4)

5 PRODUCT INFORMATION DESIGN CRITERIA (ALLOWALE STRESS DESIGN) CONTINUED Load Adjustment Factors for Normal-Weight Concrete Edge Distance (inches) Edge Distance - Dia. (in) /4" /8" /2" /8" /4" h ef 9/6 2 2 /2 /6 c cr 2 4 /6 6 7 /2 9 9/6 c min 2 /8 4 6 /8 /2 / /2 / / / / / / /2.00 Edge Reduction Factors - Dia. (in) /4" /8" /2" /8" /4" h ef 9/6 2 2 /2 /6 c cr 4 /6 6 7 /2 9 9/6 c min 2 /8 4 6 /8 Edge Distance (inches) /2 / / / / / / / / / Canada: (90) or (4) Powers USA: (800) or (94) 2-600

6 PRODUCT INFORMATION ORDERING INFORMATION Carbon Steel Smooth Wall Dropin Cat. No. Rod/Anchor Size Overall Length Thread Depth Std. ox Std. Carton Wt./00 FM or UL 604SD /4" " 7/6" 00, SD /8" 9/6" /8" FM/UL 608SD /2" 2" /6" FM/UL 620SD /8" 2 /2" /8" FM/UL 62SD /4" /6" /6" FM/UL Smart Tool Cat. No. Rod/Anchor Size Pin Length 0042SD 00427SD 00429SD /4" /8" /2" 9/64" 6/64" /6" Smart it Cat. No. Description 009SD 0097SD 0040SD Smart it for /4" Smart it for /8" Smart it for /2" it Diameter /8 /2 /8 Manual Setting Tools for Cat. No. Rod/Anchor Size Pin Length Recommended Rotary Hammer Drills /4" /8" /2" /8 /4 9/64" 6/64" /6" /6" 6/64" Powers Cat. No. DH24PF Description Hitachi DH24PF, /6 SDS Plus Rotary Hammer, -Mode (D-Handle) DH2DAL DH28PC Hitachi DH24DAL, 2.2V Lithium Ion SDS Plus Rotary Hammer (.0Ah) Hitachi DH28PC, 720W SDS Plus Rotary Hammer(0 Volt) For High Strength Concrete Powers USA: (800) or (94) Canada: (90) or (4)