Shipment. Inspection. Packing. Assembling. Grinding. Cutting Material. Forming 3/ Trioptics ImageMaster MTF Measurer
|
|
|
- Pierce Sanders
- 5 years ago
- Views:
Transcription
1 1/8
2 2/8
3 Grinding Cleaning Forming Polishing Shipment Packing Assembling Inspection Cutting Plano Milling Crystal Hand Polishing Lapping Machine Polishing Optics Polishing Precision Optics Polishing CNC Grinding and Profiling Cleaning. 9. Ultrasonic Cleaner Zygo Zygo GPI XP / D4 Interferometer Trioptics 0.5 PrismMaster 13. Trioptics Lens Measurement 14. 3D 3D Digital CMM 15. Trioptics ImageMaster MTF Measurer 16. Lambda 950 Spectrophotometer 17. Precision Thickness Measuring 18. Image Testing Cutting Material /8
4 4/8
5 5/8
6 6/8
7
8 8/8
9 N-BK7 UV Fused Silica (JGS1) Wavelength(nm) IR Fused Silica (JGS3) Wavelength(nm)
10 Attribute Typical Diameter (Φmm) 10.0, 12.7, 15.0, 20.0, 25.4, 30.0, 38.1, 50.8 Typical Thickness (mm) 2.0, 3.0, 6.0, 6.35 Diameter Tolerance (mm) +0.0/-0.2 (General), +0.0/-0.02 (High Precision) Thickness Tolerance (mm) ±0.2 (General), ±0.005 (High Precision) >80% (Small Size), >95% (Large Size) Parallelism 3 min. (General), 3 sec. (High Precision) 60/40 (General), 10/5 (High Precision) Flatness (per 25mm@633nm) λ /2(General), λ/10 (High Precision) Bevel (face width x 45 ) <0.25mm Uncoated, AR, HR, PR,, etc.
11 (1) Typical Thickness (mm) (2) 2.0, 3.0, 6.0, 6.35 (5) Attribute Typical Diameter (Φmm) 10.0, 12.7, 15.0, 20.0, 25.4, 30.0, 38.1, 50.8 Diameter Tolerance (mm) +0.0/-0.2 (General), +0.0/-0.02 (High Precision) Thickness Tolerance (mm) ±0.2 (General), ±0.005 (High Precision) Parallelism Flatness (per Bevel (face width x 45 ) (3) (4) >80% (Small Size), >95% (Large Size) 3 min. (General), 3 sec. (High Precision) 60/40 (General), 10/5 (High Precision) λ /2(General), λ/10 (High Precision) <0.25mm Uncoated, AR, HR, PR,, etc. Attribute Typical Diameter (Φmm) 8.0, 10.0, 12.7, 15.0, 20.0, 25.4, 30.0 Typical Thickness (mm) 0.5, 1.0, 2.0 Diameter Tolerance (mm) +0.0/-0.2 (General), +0.0/-0.1 (High Precision) Thickness Tolerance (mm) ±0.2 (General), ±0.05 (High Precision) >75% (Small Size), >90% (Large Size) Parallelism 3 min. (General), 10 sec. (High Precision) 80/50 (General), 40/20 (High Precision) Flatness (per 25mm@633nm) λ(general), λ/4 (High Precision) Bevel (face width x 45 ) <0.25mm Uncoated, AR, HR, PR,, etc.
12 Attribute Typical Diameter (Φmm) 8.0, 10.0, 12.7, 15.0, 20.0, 25.4, 30.0 Typical Thickness (mm) 1.0, 2.0, 3.0, 4.0 Diameter Tolerance (mm) +0.0/-0.2 (General), +0.0/-0.1 (High Precision) Thickness Tolerance (mm) ±0.2 (General), ±0.05 (High Precision) >80% (Small Size), >90% (Large Size) Parallelism 3 min. (General), 10 sec. (High Precision) 80/50 (General), 40/20 (High Precision) Flatness (per 25mm@633nm) λ(general), λ/4 (High Precision) Bevel (face width x 45 ) <0.25mm Uncoated, AR, HR, PR,, etc. Attribute Typical Diameter (Φmm) 8.0, 10.0, 12.7, 15.0, 20.0, 25.4, 30.0 Typical Thickness (mm) 1.0 ~ 20.0 Diameter Tolerance (mm) +0.0/-0.2 (General), +0.0/-0.1 (High Precision) Thickness Tolerance (mm) ±0.2 (General), ±0.05 (High Precision) >80% (Small Size), >90% (Large Size) Parallelism 3 min. (General), 10 sec. (High Precision) 60/40 (General), 10/5 (High Precision) Flatness (per 25mm@633nm) λ(general), λ/4 (High Precision) Bevel (face width x 45 ) <0.25mm Uncoated, AR, HR, PR,, etc.
13 (4) Attribute (1) Typical Diameter (Φmm) 8.0, 10.0, 12.7, 15.0, 20.0, 25.4, 30.0 (2) Typical Thickness (mm) 1.0 ~ 50.0 Diameter Tolerance (mm) +0.0/-0.2 (General), +0.0/-0.02 (High Precision) Thickness Tolerance (mm) ±0.2 (General), ±0.005 (High Precision) >80% (Small Size), >95% (Large Size) Parallelism 3 min. (General), 3 sec. (High Precision) 60/40 (General), 10/5 (High Precision) Flatness (per 25mm@633nm) λ /2(General), λ/10 (High Precision) Bevel (face width x 45 ) (3) <0.25mm Uncoated, AR, HR, PR,, etc. Attribute Typical Diameter (Φmm) 8.0, 10.0, 12.7, 15.0, 20.0, 25.4, 30.0 Typical Thickness (mm) 1.0 ~ 50.0 Diameter Tolerance (mm) +0.0/-0.2 (General), +0.0/-0.02 (High Precision) Thickness Tolerance (mm) ±0.2 (General), ±0.005 (High Precision) >80% (Small Size), >95% (Large Size) Parallelism 3 min. (General), 3 sec. (High Precision) 60/40 (General), 10/5 (High Precision) Flatness (per 25mm@633nm) λ /2(General), λ/10 (High Precision) Bevel (face width x 45 ) <0.25mm Uncoated, AR, HR, PR,, etc.
14 Attribute Material N-BK7 Grade Grade A optical A optical glass glass Dimension (mm) 1.0x1.0x1.0 ~ 100.0x100.0x100.0 Dimension Tolerance (mm) +0.0/-0.2 (General), +0.0/-0.05 (High Precision) >80% (Small Size), >95% (Large Size) Angle Tolerance (degree) <3 min. (General), <3 sec. (High Precision) λ/2 (General), λ/4 (High Precision) 60/40 (General), 10/5 (High Precision) Bevel (mm) 0.1 ~ 0.5 uncoated, AR, PR, HR, etc.
15 Attribute Material Dimension (mm) Dimension Tolerance (mm) Angle Tolerance (degree) UV Fused Silica 1.0x1.0x1.0 ~ 300.0x300.0x /-0.2 (General), +0.0/-0.05 (High Precision) >80% (Small Size), >95% (Large Size) <3 min. (General), <3 sec. (High Precision) λ/2 (General), λ/4 (High Precision) 60/40 (General), 10/5 (High Precision) Bevel (mm) 0.1 ~ 0.5 uncoated, AR, PR, HR, etc.
16 Attribute Material (1) N-BK7 Grade A optical glass Dimension Axh (mm) 2.5x2.5 ~ 100.0x100.0 Dimension Tolerance (mm) ±0.2 (General), ±0.05 (High Precision) 90 0 Deviation Tolerance <1 min. (General), <3 sec. (High Precision) λ/2 (General), λ/4 (High Precision) Reflection (per face@ nm) R>90% 60/40 (General), 20/10 (High Precision) on input and output sides uncoated, AR, etc.
17 Beamsplitter Penta Prism Attribute Material N-BK7 Grade A optical glass Dimension Axh (mm 2 ) 2.5x2.5 ~ 100.0x100.0 Dimension Tolerance (mm) ±0.2 (General), ±0.05 (High Precision) 90 0 Deviation Tolerance <1 min. (General), <3 sec. (High Precision) λ/2 (General), λ/4 (High Precision) Reflection (per face@ nm) R>90% 60/40 (General), 20/10 (High Precision) Beamsplitter Ratio Transmission/Reflection 20/80 ± 5 or 50/50 ± 5 on input and output sides uncoated, AR, etc.
18 Attribute Material N-BK7 Grade A optical glass Dimension Tolerance (mm) +0.0/ % Deviation ±3 arc senconds. Flatness (@633nm) λ/4onbigsurface, λ/8onreflectionsurfaces 60/40 Bevel (mm) Reflection coating on reflection surfaces upon request on input and output sides upon request Part No. (mm) h(mm) FCC FCC FCC FCC
19 Attribute Material BK7 Grade A optical glass Dimension Tolerance (mm) +0.0/-0.2 >80% (Small Size), >95% (Large Size) Deviation ±3 arc min., etc. Flatness (@633nm) λ/2 60/40 Bevel (mm) 0.2 ~ 0.5 uncoated Part No. A(mm) B(mm) h(mm) FDP FDP FDP
Optical Precision. Optimal Outcome.
Optical Precision. Optimal Outcome. 3402 Enterprise Drive Rowlett, TX 75088 USA Telephone: +1 (972) 463-8001 Fax: +1 (972) 463-8311 www.archeroptx.com PerfectLens Ultra Precision Glass Molded Aspheres
Optical Component Catalog
Optical Component Catalog OEM and Prototype Manufacturing www.optisourcellc.com / sales@optisourcellc.com Ph:505-792-0277 / Fax:505-792-0281 Waveplates Crystal Quartz Mica Windows Parallel Wedged Square
The RSH Catalogue. Laser Optics & Lenses
The RSH Catalogue Laser Optics & Lenses 2013 2014 1 Company Profile RSH Optronics, Headquartered in Ajmer, Rajasthan, India, is the leading supplier & manufacturer for Photonics Products (Optics, Laser
WELCOME TO EO ISRAEL EVENT
WELCOME TO EO ISRAEL EVENT WHO WE ARE 2 Edmund Optics is a global OPTICS and IMAGING company that manufactures and supplies the worldwide technical community with precision optical components and subassemblies.
Precision Optics Assemblies Technologies and Processes Built to Work Since 1965
Precision Optics Assemblies Technologies and Processes Built to Work Since 1965 1 Balgach - Rhine Valley A company built with a sole purpose: to produce high-performance OEM optics and assemblies We specialize
Understanding Optical Specifications
Understanding Optical Specifications Optics can be found virtually everywhere, from fiber optic couplings to machine vision imaging devices to cutting-edge biometric iris identification systems. Despite
Photonics West Contact us for a Stock or Custom Quote Today! Edmund Optics BROCHURE
Edmund Optics BROHURE Photonics West 2017 Product Highlights Beam Expanders Off-xis Parabolic Mirrors Right ngle Prisms ontact us for a Stock or ustom Quote Today! US: +1-856-547-3488 EUROPE: +44 (0) 1904
RMS roughness: < 1.5Å on plane surfaces and about 2Å on smoothly bended spherical surfaces
HIGH QUALITY CAF 2 COMPONENTS LOWEST STRAYLIGHT LOSSES IN THE UV Our special polishing technique for calcium fluoride guarantees: RMS roughness: < 1.5Å on plane surfaces and about 2Å on smoothly bended
Domes Apertures Reticules
Domes Stock and custom Domes available for a range of underwater, ROV and Pyronometer and high pressure viewport applications. Available in BK7, Silicon, Sapphire, UV Quartz and Acrylic. Custom BK7 glass
- Optics Design - Lens - Mirror - Window - Filter - Prism
- Optics Design - Lens - Mirror - Window - Filter - Prism Optics Design Camera lens Design Laser Line Beam Design Lithography lens Design F-theta lens Design Beam Expender Design Zoom Lens Design, etc.
MULTI-ELEMENT LENSES. Don t see exactly what you are looking for? CVI Laser Optics specializes in prototype to volume production manufacturing!
MULTI-ELEMENT LENSES Mirrors Multi-element lenses are an ideal solution for applications requiring specialized performance and/or a high degree of aberration correction. Our line of multi-element lenses
StockOptics. CATALOG 2018 Europe
StockOptics CATALOG 2018 Europe Dear asphericon customer Within the StockOptics product line, you can choose from an extensive portfolio of precision-polished aspheric lenses, cylinders and axicons. Benefit
Aspheric Lenses. Contact us for a Stock or Custom Quote Today! Edmund Optics BROCHURE
Edmund Optics BROCHURE Aspheric Lenses products & capabilities Contact us for a Stock or Custom Quote Today! USA: +1-856-547-3488 EUROPE: +44 (0) 1904 788600 ASIA: +65 6273 6644 JAPAN: +81-3-3944-6210
P r i s m s I N D E X
P r i s m s P r i s m s I N D E X Selection By processing the various forms of glass, the prism produces a special effect due to refraction. Since there is no angular offset that after manufacture, it
Robert Huang, CEO. Our Vision: To Be Major Player in Global Opto-Electronic Industry. Our Mission: To Broaden Wavelength
Dear Customer: Over the past 14 years, Wavelength Opto-Electronic Singapore has grown from a small optics company to a global supplier in laser optics industry. Today, we have nearly 250 Wavelength employees
why TECHSPEC? From Design to Prototype to Volume Production
high volume stock optics Lenses From Design to Prototype to Volume Production Prisms Filters why TECHSPEC? Volume Discounts from 6 to 100,000 Pieces Certified Edmund Optics Quality Continual Availability
TECHNICAL QUICK REFERENCE GUIDE MANUFACTURING CAPABILITIES GLASS PROPERTIES COATING CURVES REFERENCE MATERIALS
TECHNICAL QUICK REFERENCE GUIDE COATING CURVES GLASS PROPERTIES MANUFACTURING CAPABILITIES REFERENCE MATERIALS TABLE OF CONTENTS Why Edmund Optics?... 3 Anti-Reflective (AR) Coatings... 4-16 Metallic Mirror
COMPANY HISTORY MISSION STATEMENT. 385 Cooper Road West Berlin, NJ USA Phone: Fax:
COMPANY HISTORY Founded in 1960 to provide synthetic fused silica for military radar applications, Dynasil has become widely recognized in the industry as a reliable supplier of the highest quality optical
WHO WE ARE. Key data. Legal form: privately held joint stock company with registered shares. Production area: m² (45251,48 ft²) Employees: 280
Pure Fine Optics WHO WE ARE PFO is an optics manufacturer and internationally operating company, focusing on precision and highquality optical components and opto-mechanical products under customer s specification.
The LINOS Plano Optics
The LINOS Plano Optics LINOS is known for high-quality plane plates from optical glass, fused silica and sapphire, as well as a variety of prisms, filters, beam splitters, reticles and dispersion plates.
Alex Lyubarsky OPTI 521 December 8, 2013
Alex Lyubarsky OPTI 521 December 8, 2013 Introduction to Optical Specification Standards (Section 1) Sections 2-13 of ISO 10110 Standard Specification ISO 10110 Drawings Q & A ISO 10110 standard created
Practical Plastic Optics
Practical Plastic Optics Practical Optics Seminar September 6, 2006 Mike Schaub Raytheon Missile Systems 1151 E. Hermans Road Tucson, AZ 85706 (520) 794-8162 Michael_P_Schaub@raytheon.com 1 Overview Plastic
PREPARED BY: I. Miller DATE: 2004 May 23 CO-OWNERS REVISED DATE OF ISSUE/CHANGED PAGES
Page 1 of 30 LIGHTMACHINERY TEST REPORT LQT 30.11-1 TITLE: HMI Michelson Interferometer Test Report Serial Number 1 - Wideband FSR INSTRUCTION OWNER HMI Project Manager PREPARED BY: I. Miller DATE: 2004
PREPARED BY: I. Miller DATE: 2004 May 23 CO-OWNERS REVISED DATE OF ISSUE/CHANGED PAGES
Page 1 of 30 LIGHTMACHINERY TEST REPORT LQT 30.11-2 TITLE: HMI Michelson Interferometer Test Report Serial Number 2 - Narrowband FSR INSTRUCTION OWNER HMI Project Manager PREPARED BY: I. Miller DATE: 2004
The LINOS Singlets. Our quality criteria:
The LINOS From convergent lenses and diffuse lenses to best form lenses and aspheres, our extensive selection of simple lenses, or singlets, with various focal lengths and diameters guarantees that you
Bandpass Edge Dichroic Notch & More
Edmund Optics BROCHURE Filters COPYRIGHT 217 EDMUND OPTICS, INC. ALL RIGHTS RESERVED 1/17 Bandpass Edge Dichroic Notch & More Contact us for a Stock or Custom Quote Today! USA: +1-856-547-3488 EUROPE:
MORITA OPTICS CO.,LTD MORITA OPTICS CO.,LTD WELCOME FACTORY SIZE. SITE 3,625 m2 MADE IN JAPAN
www. MADE IN JAPAN WELCOME ESTABLISHMENT CAPITAL FACTORY SIZE 1951 MAY 14,000,000-JPY SITE 3,625 m2 2014.12.01 MADE IN JAPAN ABOUT US www. MORITA OPTIC CO.,LTD WAS BORN AS AN OPTICAL GLASS PROCESSING MAKER
High Volume Stock optics
High Volume Stock optics From Design to Prototype to Volume Production TECHSPEC Lenses TECHSPEC prisms TECHSPEC filters COPYRIGHT COPYRIGHT 2011 EDMUND 2014 EDMUND OPTICS, OPTICS, INC. ALL INC. RIGHTS
Components. Table of Contents. FemtoLine Laser Crystals. FemtoLine Laser Optics. Cleaning Instructions
Components Table of Contents Laser Mirrors...5. Low GDD Ultrafast Mirrors...5. Dual Band Mirrors...5. Broadband Low GDD Ultrafast Mirrors...5.5 Laser Harmonic Separators...5.6 Laser Output Couplers...5.7
Table of Contents. Synchrotron radiation and Extra-UV Mirrors. Optical Substrates. Lenses. Variable Reflectivity Mirrors
Table of Contents... 2 Optical Flats... 3 Plano-Convex... 4 Plano-Concave... 6 Double-Convex... 8 Double-Concave... 9 Lens Kits... 10 Positive Cylindrical... 12 Negative Cylindrical... 13 Meniscus... 15
MORITA OPTICS CO.,LTD
moritaop.co.jp 33-244TAME-SEMIKAWA, TOYOHASHI AICHI 440-0021 JAPAN PHONE +81-532-61-2341 FAX-81-532-61-2343 ABOUT US MORITA OPTIC CO.,LTD WAS BORN AS www.moritaop.co.jp CEO: T.MORITA AN OPTICAL GLASS PROCESSING
Practical Guide to Specifying Optical Components
Practical Guide to Specifying Optical Components OPTI 521 Introduction to Opto-Mechanical Engineering Fall 2012 December 10, 2012 Brian Parris Introduction This paper is intended to serve as a practical
capabilities Infrared Contact us for a Stock or Custom Quote Today!
Infrared capabilities o 65+ Stock Components Available for Immediate Delivery o Design Expertise in SWIR, Mid-Wave, and Long-Wave Assemblies o Flat, Spherical, and Aspherical Manufacturing Expertise Edmund
Table of Contents. Optical Substrates. Lenses. Variable Reflectivity Mirrors. Non Polarizing Beamsplitter Cubes. Polarizing Optics
Table of Contents... 2 Plano-Convex... 3 Plano-Concave... 5 Double-Convex... 6 Double-Concave... 7 Positive Cylindrical... 8 Negative Cylindrical... 9 Meniscus... 10 Achromatic... 11 Aspherical... 12 Plano-Convex
Tolerances. WikiOptics. WikiOptics
Tolerances 2014 Optical system design Robert E. Fischer/ Biljana Tadic-Galeb 2 Candidate Tolerances for a reasonable performance lens(p.322) Parameter Tolerance Parameter Tolerance Radius Testplate measurement
YAG LASER OPTICS - COVERSLIDES / LENSES / MIRRORS / LASER RODS / FLASH LAMPS / FIBER OPTIC CABLES
Clear Beam Company PH: 864-898-0702 115 Pine Lane FAX: 864-898-0078 Pickens, SC 29671 YAG LASER OPTICS - COVERSLIDES / LENSES / MIRRORS / LASER RODS / FLASH LAMPS / FIBER OPTIC CABLES CTA8061 Cotton Tip
CORPORATE PRESENTATION
CORPORATE PRESENTATION WHO WE ARE Edmund Optics is a global OPTICS and IMAGING company that manufactures and supplies the worldwide technical community with precision optical components and subassemblies.
IntroOptical Filters. Windows
IntroOptical Filters Filter Specifications............ 286 Filter Selection Guide........... 288 Custom and Image Filters........ 291 Interference Filters............. 292 High Rejection Laser Line Filters...
Beam Splitters. Diameter ET Transmission Reflectance %
Beam Splitters Beam splitters allow a beam to be split into two beams of differing power, however, the most popular power split is 50:50 at a 45 incidence angle. The polarization needs to be considered
Optical Filters and Coatings. Engineered & Manufactured to the Highest Industry Standards in the World
Optical Filters and Coatings Engineered & Manufactured to the Highest Industry Standards in the World Why choose Andover Corporation? Andover Corporation was established in 1976 with the purpose of designing
Spectrograph Lens Fabrication RFQ 22 Jan, 2003
Spectrograph Lens Fabrication RFQ 22 Jan, 2003 1 Scope of Project This document describes the specifications for the fabrication of 18 optical elements to be used in the Prime Focus Imaging Spectrograph
SELECTION GUIDE MULTIPLE-ORDER QUARTZ WAVEPLATES ZERO-ORDER QUARTZ WAVEPLATES DUAL-WAVELENGTH WAVEPLATES... 85
WAVEPLATES Mirrors Waveplates are used in applications where the control, synthesis, or analysis of the polarization state of an incident beam of light is required. Our waveplates are constructed of very
Developments in Precision Asphere Manufacturing Jay Tierson, Ed Fess, Greg Mathews OptiPro Systems LLC, 6368 Dean Parkway, Ontario NY 14519
Developments in Precision Asphere Manufacturing Jay Tierson, Ed Fess, Greg Mathews OptiPro Systems LLC, 6368 Dean Parkway, Ontario NY 14519 ABSTRACT The increased use of aspheres in today s optical systems
Diamond T u T rn r ing Fac g F ility
Welcome to Diamond Turning Facility One stop solution for Optical Components, IR Optics, Polymer Optics, LED Lighting Lenses, Light pipes, LED Backlights, Technical Plastic Parts,High precision Moulds,
TECHSPEC COMPACT FIXED FOCAL LENGTH LENS
Designed for use in machine vision applications, our TECHSPEC Compact Fixed Focal Length Lenses are ideal for use in factory automation, inspection or qualification. These machine vision lenses have been
INTERFEROMETER VI-direct
Universal Interferometers for Quality Control Ideal for Production and Quality Control INTERFEROMETER VI-direct Typical Applications Interferometers are an indispensable measurement tool for optical production
MicroSpot FOCUSING OBJECTIVES
OFR P R E C I S I O N O P T I C A L P R O D U C T S MicroSpot FOCUSING OBJECTIVES APPLICATIONS Micromachining Microlithography Laser scribing Photoablation MAJOR FEATURES For UV excimer & high-power YAG
PREPARED BY: I. Miller DATE: 2004 May 23 CO-OWNERS REVISED DATE OF ISSUE/CHANGED PAGES
Page 1 of 34 LIGHTMACHINERY TEST REPORT LQT 30.11-3 TITLE: HMI Michelson Interferometer Test Report Serial Number 3 wide band FSR INSTRUCTION OWNER HMI Project Manager PREPARED BY: I. Miller DATE: 2004
Terms and Conditions
Terms and Conditions Specifications Specifications are subject to change without notification.customers should always verify the suitability of a product for its intended use. If a particular specification
LENSEL OPTICS PVT. LTD. ISO 9001:2008 Certified Company
. BRIEF INTRODUCTION OF LENSEL OPTICS We have a Glass Lens Manufacturing Line, Plastic Injection Molding Line, Coating Systems, Optical Assembly facilities and Test and Inspection facilities at our factory
SpectroMaster. High Precision Automatic Spectrometer-Goniometer
SpectroMaster High Precision Automatic Spectrometer-Goniometer CONTENTS Overview 3 Measurement Principle 3 Error Analysis and System Requirements 4 Goniometer Error...4 Ambient Conditions...6 Sample Quality...6
Multi-Element Overview
Intro Lenses Overview........ 128 Windows Achromats 425-675nm Cemented Doublets. 132 425-675nm Fast Achromats..... 133 1064/633nm Air-Spaced...... 134 1064/532nm Air-Spaced...... 135 Aplanats Visible....................
OptiSonic: The Latest in Ultrasonic Machining Technology. Ron Colavecchia 11/10/2016
OptiSonic: The Latest in Ultrasonic Machining Technology Ron Colavecchia 11/10/2016 Agenda Why use UltraSonic IntelliSonic software Tool holder developments Test cases Questions and Answers 2 3 OptiSonic
Tolerancing in Zemax. Lecture 4
Tolerancing in Zemax Lecture 4 Objectives: Lecture 4 At the end of this lecture you should: 1. Understand the reason for tolerancing and its relation to typical manufacturing errors 2. Be able to perform
We Make Semi-finished Components.
Express Glass Services We Make Semi-finished Components. Out of optical glass, filter glass, synthetic quartz glass and specialty glasses or glass ceramics. Express Glass Services EGS Express Glass Services
Quality assurance. OEM Custom Services. comaroptics.com
Quality assurance OEM Custom Services comaroptics.com Our unique approach Dependable quality Whether your product ends up on Mars or in microscopes, the last thing you want is for it to fail in the hands
APPLICATION NOTE. Understanding the PV Specification. Introduction. Problems with PV
APPLICATION NOTE Understanding the PV Specification Introduction An array of non-standard, arbitrary practices are frequently used in the optics industry to demonstrate conformance of a part to the traditional
Optical Components. Table of Contents. Mirrors. Windows & Filters
Optical Components Mirrors Polarizing Optics UV & IR Optics High Reflectivity...1.3 Laser Line...1.3 Broadband...1.3 Partial Reflecting...1.4 Laser Harmonic Separators...1.4 Anti-Reflection...1.5 Laser
S-S35B-F
Specification S-S35B-F2-275-01-2-110 RoHS SETi Customer Drawn Approval Approval 1. Description Table of Contents: 2. Mechanical Dimensions 3. Characteristics of S-S35B-F2-275-01-2-110 4. Characteristic
Typical Interferometer Setups
ZYGO s Guide to Typical Interferometer Setups Surfaces Windows Lens Systems Distribution in the UK & Ireland www.lambdaphoto.co.uk Contents Surface Flatness 1 Plano Transmitted Wavefront 1 Parallelism
Flat Top, Ultra-Narrow Band Pass Optical Filters Using Plasma Deposited Hard Oxide Coatings
Flat Top, Ultra-Narrow Band Pass Optical Filters Using Plasma Deposited Hard Oxide Coatings Alluxa Engineering Staff September 2012 0 1 0.1 1 cav 2 cav 3 cav 4 cav 5 cav 0.01 0.001 635 636 637 638 639
End Capped High Power Assemblies
Fiberguide s end capped fiber optic assemblies allow the user to achieve higher coupled power into a fiber core by reducing the power density at the air/ silica interface, commonly the point of laser damage.
NEW NEW NEW NEW NEW NEW. Systems
Table of Contents Polarization Components Polarizers NEW Retarders NEW NEW Linear Polarizer Principles 3 Precision Linear Polarizers 6 High Contrast Linear Polarizers 8 Ultra-High Contrast Linear Polarizers
Introduction of Nikon s Large Silica Glass Plate
GLASS BUSINESS UNIT Introduction of Nikon s Large Silica Glass Plate 11. Nov. 2015 NGD2015-247 Precision Glass Technologies That Only Nikon Can Deliver Nikon s Strengths Integrated production from optical
The Core Optics. Input Mirror T ~ 3% T ~ 3% Signal Recycling Photodetector
The Core Optics End Mirror Power Recycling Mirror Input Mirror T ~ 3% T ~ 3% End Mirror T ~ 10 ppm Laser Nd:Yag 6 W 100 W 12 kw 20 m 4000 m Signal Recycling Photodetector Mirror (dark fringe) Fold mirrors
OPTICAL FILTERS. lasercomponents.com
OPTICAL FILTERS lasercomponents.com Optical Filters UV VIS NIR IR Since LASER COMPONENTS was first founded in 1982, optical filters have played an important part in LASER COMPONENTS' product range. The
Optical Design Forms for DUV&VUV Microlithographic Processes
Optical Design Forms for DUV&VUV Microlithographic Processes James Webb, Julie Bentley, Paul Michaloski, Anthony Phillips, Ted Tienvieri Tropel Corporation, 60 O Connor Road, Fairport, NY 14450 USA, jwebb@tropel.com
Exercise 8: Interference and diffraction
Physics 223 Name: Exercise 8: Interference and diffraction 1. In a two-slit Young s interference experiment, the aperture (the mask with the two slits) to screen distance is 2.0 m, and a red light of wavelength
Research Grade Xenon Arc Lamp Sources LH-Series 75 W - 300W
Research Grade Xenon Arc Lamp Sources LH-Series 75 W - 300W Features Vertical or horizontal bulb and housing operation Xenon arc lamps from 75W to 300W Multiple collimated or focused output optics in various
WHAT S NEW IN OPTICAL COATINGS AN IN-DEPTH LOOK AT COATING TECHNOLOGY, SPECIFICATIONS, AND APPLICATIONS
WHAT S NEW IN OPTICAL COATINGS AN IN-DEPTH LOOK AT COATING TECHNOLOGY, SPECIFICATIONS, AND APPLICATIONS Stephan Briggs January 2016 OVERVIEW 2 Key Terminology Anti-Reflection vs. Filter Coatings Coating
UVLED SMD. Description. Maximum Ratings (T CASE = 25 C) Electro-Optical Characteristics (T CASE = 25 C, I F = 500mA)
UVLED-365-500-SMD v 3.0 02.02.2016 Description UVLED-365-500-SMD is a surface mount infrared High Power LED with a typical peak wavelength of 365 nm and radiant intensity of typ. 500 mw. It comes in ceramic
Filters. Edgepass Filters Introduction to Edgepass Interference Filters 96 Long Pass Interference Filters 97 Short Pass Interference Filters 97
Bandpass Introduction to Bandpass Interference 90-91 UV Bandpass 92 Visible Bandpass 92-93 IR Bandpass 94-95 Bandpass Filter Sets 95 Edgepass Introduction to Edgepass Interference 96 Long Pass Interference
SpectroMaster. High Precision Automatic Spectrometer-Goniometer
SpectroMaster High Precision Automatic Spectrometer-Goniometer CONTENTS Overview 3 Measurement Principle 3 Error A naly sis and System Requirements 4 Goniometer Error...4 Ambient Conditions...6 Sample
3.0 Alignment Equipment and Diagnostic Tools:
3.0 Alignment Equipment and Diagnostic Tools: Alignment equipment The alignment telescope and its use The laser autostigmatic cube (LACI) interferometer A pin -- and how to find the center of curvature
Micro-Optics. Competence,Capabilities and Products
Micro-Optics Competence,Capabilities and Products 1 2 Company Profile Qioptiq, an Excelitas Technologies Company, designs and manufactures photonic products and solutions that serve a wide range of markets
Gentec Electro-Optics, Inc
Gentec Electro-Optics, Inc. 2013. Accessories for Beam Diagnostics Revision 2.0 2 WARRANTY The Gentec-EO accessories for beam diagnostics carry a one-year warranty (from date of shipment) against material
Lithography. 3 rd. lecture: introduction. Prof. Yosi Shacham-Diamand. Fall 2004
Lithography 3 rd lecture: introduction Prof. Yosi Shacham-Diamand Fall 2004 1 List of content Fundamental principles Characteristics parameters Exposure systems 2 Fundamental principles Aerial Image Exposure
RLCU Description. Maximum Ratings. Electro-Optical Characteristics (T CASE = 25 C, I F = 350mA)
RLCU-440-400 v 1.0 10.07.2014 Description RLCU-440-400 is a surface mount infrared High Power LED with a typical peak wavelength of 400 nm and radiant intensity of typ. 190-310 mw. It comes in ceramic
CONTENTS 3 / Features 3 / Outline dimensions 4 / Applications 4 / Absolute Maximum Ratings 4 / 12
2 / 12 CONTENTS 1. Features 3 / 12 2. Outline dimensions 3 / 12 3. Applications 4 / 12 4. Absolute Maximum Ratings 4 / 12 5. Electro-Optical characteristics 4 / 12 6. Typical Characteristic Curves 5 /
Prisms Selection Guide
P r i s m s P r i s m s I N D E X Selection By processing the various forms of glass, the prism produces a special effect due to refraction. Since there is no angular offset that after manufacture, it
Grinding Wheels For Glass Series
Grinding Wheels For Glass Series We have the professional R&D institution and advanced facilities such as numerical control machining, electrical processing and laser processing.with reference to our diamond
New Optics for Astronomical Polarimetry
New Optics for Astronomical Polarimetry Located in Colorado USA Topics Components for polarization control and polarimetry Organic materials Liquid crystals Birefringent polymers Microstructures Metrology
Solid Immersion and Evanescent Wave Lithography at Numerical Apertures > 1.60
Solid Immersion and Evanescent Wave Lithography at Numerical Apertures > 1.60 Bruce Smith Y. Fan, J. Zhou, L. Zavyalova, M. Slocum, J. Park, A. Bourov, E. Piscani, N. Lafferty, A. Estroff Rochester Institute
Part 5-1: Lithography
Part 5-1: Lithography Yao-Joe Yang 1 Pattern Transfer (Patterning) Types of lithography systems: Optical X-ray electron beam writer (non-traditional, no masks) Two-dimensional pattern transfer: limited
StockOptics. CATALOG 2017 Europe
StockOptics CATALOG 2017 Europe a HighNA Page 05 Dear asphericon customer StockOptics Product Range a LowNA Page 07 Within the StockOptics product line, you can choose from an extensive portfolio of precisionpolished
CROWN CUTTERS. Manufacturer of: ENGRAVING TOOLS ROUTING TOOLS STANDARD END MILLS SPECIAL CUTTING TOOLS. R.L. Schmitt Co. Inc
CROWN CUTTERS Manufacturer of: ENGRAVING TOOLS ROUTING TOOLS STANDARD END MILLS SPECIAL CUTTING TOOLS R.L. Schmitt Co. Inc 1/08 xx 1 Solid Carbide Engraving Tools Cutters and diamond gravers for all popular
EVERLIGHT ELECTRONICS CO.,LTD.
Technical Data Sheet 0805 Package Chip LED EVERLIGHT ELECTRONICS CO.,LTD. Features Package in 8mm tape on 7 diameter reel. Compatible with automatic placement equipment. Compatible with infrared and vapor
Plan Optik AG. Plan Optik AG PRODUCT CATALOGUE
Plan Optik AG Plan Optik AG PRODUCT CATALOGUE 2 In order to service the high demand of wafers more quickly, Plan Optik provides off the shelf products in sizes from 2 up to 300mm diameter. Therefore Plan
ASPHERIC LENSES FOR OPTICS AND PHOTONICS
ASPHERIC LENSES FOR OPTICS AND PHOTONICS Products for Laser Guides, Measurement Systems, Metrology & Bio Medical Geltech Molded Glass Aspheres Infrared Optics Fiber Collimators GRADIUM Lenses OPTICAL TECHNOLOGIES
Geltech Aspheric Lenses
High quality optical glass lenses Custom designs available Numerical aperture up to 0.83 Diameters from 0.250 mm to 25.0 mm Diffraction-limited performance Available in standard and custom housings For
Southern African Large Telescope. RSS Throughput Test Plan
Southern African Large Telescope RSS Throughput Test Plan Kenneth Nordsieck University of Wisconsin Document Number: SALT-3160AP0005 Revision 1.0 27 June, 2006 Change History Rev Date Description 1.0 27
COS FUV Grating Substrate Specification
COS FUV Grating Substrate Specification Date: Document Number: Revision: Contract No.: NAS5-98043 CDRL No.: N/A Prepared By: Reviewed By: Approved By: Approved By: Approved By: E. Wilkinson, COS Instrument
Engineering drawing. Semester I/II Mechanical Engineering Department Technical University of Gdańsk. Lecture 8
Engineering drawing Semester I/II Mechanical Engineering Department Technical University of Gdańsk Lecture 8 Representing Tolerance Values Tolerance is the total amount a dimension may vary and is the
Inspection and Measurement
Inspection and Measurement Inspection An action to insure what is being manufactured conforms to the specifications by attributes use of gages: go or no-go by variables use of calibrated instruments Measurement
Optical Components for Laser Applications. Günter Toesko - Laserseminar BLZ im Dezember
Günter Toesko - Laserseminar BLZ im Dezember 2009 1 Aberrations An optical aberration is a distortion in the image formed by an optical system compared to the original. It can arise for a number of reasons
Optical Engineering 421/521 Sample Questions for Midterm 1
Optical Engineering 421/521 Sample Questions for Midterm 1 Short answer 1.) Sketch a pechan prism. Name a possible application of this prism., write the mirror matrix for this prism (or any other common
Where Image Quality Begins
Where Image Quality Begins Filters are a Necessity Not an Accessory Inexpensive Insurance Policy for the System The most cost effective way to improve repeatability and stability in any machine vision
Fundamental Optics ULTRAFAST THEORY ( ) = ( ) ( q) FUNDAMENTAL OPTICS. q q = ( A150 Ultrafast Theory
ULTRAFAST THEORY The distinguishing aspect of femtosecond laser optics design is the need to control the phase characteristic of the optical system over the requisite wide pulse bandwidth. CVI Laser Optics
Preliminary specification. RoHS. Specification CUN*AF1A. Drawn Approval Approval. QP(P) (Rev.0)
Preliminary specification Specification RoHS CUN*AF1A SOC Customer Drawn Approval Approval [ Contents ] 1. Description 2. Outline dimensions 3. Characteristics of CUN*AF1A 4. Characteristic diagrams 5.
A fast F-number 10.6-micron interferometer arm for transmitted wavefront measurement of optical domes
A fast F-number 10.6-micron interferometer arm for transmitted wavefront measurement of optical domes Doug S. Peterson, Tom E. Fenton, Teddi A. von Der Ahe * Exotic Electro-Optics, Inc., 36570 Briggs Road,