ONLINE AUCTION. Complete Custom Architectural Woodworking Company. Denver, CO

Size: px

Start display at page:

Download "ONLINE AUCTION. Complete Custom Architectural Woodworking Company. Denver, CO"

Blaise Roberts
5 years ago
Views:

1 ONLINE AUCTION Complete Custom Architectural Woodworking Company Online Bidding Opens: Wednesday, March 19 th 10AM Local Time Online Bidding Closes: Wednesday, March 26 th Denver, CO Sale Offered in Partnership with Phone A Hilco Global Company Vested in Your Success

HilcoTM Industrial ONLINE AUCTION ONLINE BIDDINg OPENS WEDNESDAY, MARCH 19 TH BEGINNING AT 10:00AM LOCAL TIME ONLINE BIDDINg CLOSES WEDNESDAY, MARCH 26 TH CHeCk www.hilcoind.

tpfister@hilcoglobal.com ASSET LOCATION 11170 IRMA DRIVE DENVER, CO 80233 DIRECTIONS FROM DENVER INTERNATIONAL AIRPORT: EXIT AIRPORT TO E-470 N, TAKE EXIT 32 FOR 104TH AVE AND TURN LEFT.

THE BUYER S PREMIUM WILL BE REDUCED TO 16% FOR PAYMENTS MADE BY MEANS OF CASH, CASHIER S CHECK, COMPANY CHECK (WITH BANK LETTER OF GUARAN- TEE) OR WIRE TRANSFER WITHIN 48 HOURS OF SALE CLOSE.

2 HilcoTM Industrial ONLINE AUCTION ONLINE BIDDINg OPENS WEDNESDAY, MARCH 19 TH BEGINNING AT 10:00AM LOCAL TIME ONLINE BIDDINg CLOSES WEDNESDAY, MARCH 26 TH CHeCk For ClosInG times PREVIEw MONDAY, MARCH 17 TH THRU THURSDAY, MARCH 20 TH 9AM TO 4PM LOCAL TIME EACH DAY to schedule An earlier InspeCtIon, please ContACt tim pfister At or ASSET LOCATION IRMA DRIVE DENVER, CO DIRECTIONS FROM DENVER INTERNATIONAL AIRPORT: EXIT AIRPORT TO E-470 N, TAKE EXIT 32 FOR 104TH AVE AND TURN LEFT. CONTINUE TO IRMA DR AND TURN RIGHT. DESTINATION WILL BE ON THE RIGHT FURTHER INFORMATION AN 18% BUYER'S PREMIUM WILL BE CHARGED ON ALL ASSETS. THE BUYER S PREMIUM WILL BE REDUCED TO 16% FOR PAYMENTS MADE BY MEANS OF CASH, CASHIER S CHECK, COMPANY CHECK (WITH BANK LETTER OF GUARAN- TEE) OR WIRE TRANSFER WITHIN 48 HOURS OF SALE CLOSE. AUCTION WILL BE CONDUCTED IN ENGLISH, ACCEPTING U.S. CURRENCY ONLY. REMOVAL DEADLINE IS FRIDAY, APRIL 18 TH WITH HOURS OF REMOVAL BETWEEN 9AM TO 4PM MONDAY THRU FRIDAY. BUYERS WITH ITEMS LEFT ON SITE AFTER DEADLINE ARE SUBJECT TO FINES OF $500 PER DAY. MACHINERY & EQUIPMENT TIM PFISTER AT TPFISTER@HILCOGLOBAL.COM PAYMENT INFORMATION LESIA JOSEPH AT LJOSEPH@HILCOGLOBAL.COM HILCO ACCOUNTS RECEIVABLE AT HIN_AR@HILCOGLOBAL.COM CUSTOMER SERVICE HILCO INFO@HILCOIND.COM SANDI NEELY AT X16 SNEELY@HILCOGLOBAL.COM Information contained herein deemed to be accurate at time of printing and subject to change. For updated information, please visit our website at for any changes to date, sale process, terms and conditions and list of available assets EDgEBAnDEr 1 HOMAG MODEL OPTIMAT KAL 310/6/A20/S2 EDGEBANDER, S/N (2007), 37-13/32" Working Level, 7/8" to 2-5/32" Min. Working Width, 15/32"" to 2-3/8" Thickness, 1-1/8" Panel Overhang, 0.16" to 25/32" Edge Thickness-Strips, 0.12" to 1/8" Edge Thickness-Coils, fpm speed, Adjustable Infeed Fence, Pre-Milling, Panel Pre-Heater, Gluing Unit, Single Coil, Clipping Unit, Magazine Height Adjustment, Chamfer/Straight, Top and Bottom Flush Trimming, Bevel Trimming, Radius Cutter, Scraping Device, Top and Bottom Edge Buffing, PC22 Power Control, Ligmatech ZHR01/L/065 Material Return, S/N , 2007, with 11-3/4" to 98-3/8" Panel Length, 2" to 57" Width, 5/16" to 2-3/8" Thickness, fpm LARGE QUANTITY OF EDGEBANDING COILS, in Three Cabinets, Two Large Divided Organizer Cabinets and One Rolling Cart 2 To schedule an auction, please call Hilco Industrial at HILCO (44526)

EDGEBANDER CNC MACHINING CENTERS CNC PANEL SAWS 2006 CnC MAChining CEnTErS 1 WEEKE MODEL BHC VENTURE 2 49.

5 Router Spindle, 18,000 RPM, HSK-63 Tool Clamping, 8-Position Tool Magazine, Scoring Saw, Vacuum Pump 1 SCMI MODEL TECH 99L 36" X 120" CNC MACHINING CENTER, S/N 121418 (1998), 10

CENTER, S/N 0-250-17-2170 (2012), 200-3050mm Workpiece Length, 7-850mm Workpiece Width, 12-60mm Workpiece Thickness, Vertical Drilling Block, Horizontal Drill Block with 4 Spindles in

075 (2003), 95mm Blade Projection, 350mm Blade, 394 fpm Saw Travel, 300mm Scorer, 262 fpm Feeder Travel, (9) Material Clamps, (3) Air Tables 1 HOLZMA MODEL HPP250/38/38 149" CNC PANEL

3 EDGEBANDER CNC MACHINING CENTERS CNC PANEL SAWS 2006 CnC MAChining CEnTErS 1 WEEKE MODEL BHC VENTURE " X 124" CNC MACHINING CENTER, S/N (2006), (12) Vertical Drilling Spindles, 2.3 HP, (6) Horizontal Drilling Spindles, 2.3 HP, 7,500 RPM Drilling, 9.5 Router Spindle, 18,000 RPM, HSK-63 Tool Clamping, 8-Position Tool Magazine, Scoring Saw, Vacuum Pump 1 SCMI MODEL TECH 99L 36" X 120" CNC MACHINING CENTER, S/N (1998), 10 Vertical Boring Spindles, 4 Horizontal Boring Spindles, Scoring, 9 HP Router, 12,000/24,000 RPM, ESA Kvara Control, 8 Rails, 2 Pods/Rail, Vacuum Pump 1 WEEKE MODEL BHX-050 CNC MACHINING CENTER, S/N (2012), mm Workpiece Length, 7-850mm Workpiece Width, 12-60mm Workpiece Thickness, Vertical Drilling Block, Horizontal Drill Block with 4 Spindles in X, Horizontal Drill Block with 2 Spindles in Y, Grooving Saw, 5kW Routing Motor, PowerControl CnC PAnEL SAWS 1 SCHELLING MODEL FX-H430/ " CNC PANEL SAW, S/N (2003), 95mm Blade Projection, 350mm Blade, 394 fpm Saw Travel, 300mm Scorer, 262 fpm Feeder Travel, (9) Material Clamps, (3) Air Tables 1 HOLZMA MODEL HPP250/38/38 149" CNC PANEL SAW, S/N (2011), 75mm Blade Projection, 196 fpm Fence Speed, 12 HP Main Saw Motor, 1.5 HP Scoring Saw Motor, 328 fpm Saw Carriage, CADmatic Control, 149" Cutting Length and Width, (6) Workpiece Clamps, (3) Air Tables For more information, please visit us on the web at 3

DOWEL INSERTERS SAWS MOULDER DRAWER & CASE CLAMPING SANDER 2006 DrAWEr & CASE CLAMPing 1 RITTER MODEL R-525 60" X 96" CASE CLAMPING MACHINE, S/N 454

Controls 1 JLT MODEL 190B-M2 36" X 24" PNEUMATIC DRAWER CLAMPING MACHINE SLiDing TABLE SAWS 1 MARTIN MODEL T71 14" SLIDING TILTING ARBOR TABLE SAW, S/N

2800/4000/5500 RPM, 72" Squaring Arm, 28" Rip Fence WiDE BELT SAnDEr 1 BUTFERING MODEL CLASSIC 213CE 52" SINGLE HEAD BELT SANDER, S/N 44070 (1998),

DOWEL INSERTER, S/N 8200 (2008), Dowel Hopper, Adjustable Hold Downs, Glue Tanks, (2) 24" Work Zones, (4) Horizontal Spindles, (2) Vertical Spindles,

5kW 1 ACCU-SYSTEMS MODEL DD MANUAL DOWEL INSERTER, S/N 053-99, 9" Vibratory Bowl Feeder, Manual Insertion Gun, 110 volt UP CUT SAW 1 NORTHTECH MODEL

(1998), 9" x 4-3/4" Capacity, "BRLTB" Head Sequence, 9kW, 9kW, 9kW, 13kW, 9kW 1-13/16" Spindle, 6,000 RPM, 13-79 fpm Variable Feed Drive, 2-Accurate

4 DOWEL INSERTERS SAWS MOULDER DRAWER & CASE CLAMPING SANDER 2006 DrAWEr & CASE CLAMPing 1 RITTER MODEL R " X 96" CASE CLAMPING MACHINE, S/N 454 (1999), PSI Horizontal and Vertical Beams, Beam Measuring Rules 1 ACCU-SYSTEMS MODEL VCS PNEUMATIC VERTICAL CASE CLAMPING MACHINE, Push Button Controls 1 JLT MODEL 190B-M2 36" X 24" PNEUMATIC DRAWER CLAMPING MACHINE SLiDing TABLE SAWS 1 MARTIN MODEL T71 14" SLIDING TILTING ARBOR TABLE SAW, S/N V (1985), 72" Squaring Arm, 2800/4000/5500 RPM, 48" Rip Fence 1 MARTIN MODEL T72 14" SLIDING TILTING ARBOR TABLE SAW, S/N V (1987), 2800/4000/5500 RPM, 72" Squaring Arm, 28" Rip Fence WiDE BELT SAnDEr 1 BUTFERING MODEL CLASSIC 213CE 52" SINGLE HEAD BELT SANDER, S/N (1998), Butfering Control, 52" Brush on Exit, Run Out Table QUANTITY OF 52" Sanding Belts, with Assorted Grits 2008 DOWEL inserters 1 DELMAC MODEL HBD-1250 DOWEL INSERTER, S/N 8200 (2008), Dowel Hopper, Adjustable Hold Downs, Glue Tanks, (2) 24" Work Zones, (4) Horizontal Spindles, (2) Vertical Spindles, 5kW 1 GANNER MODEL GANNOMAT HEAD DOWEL INSERTER, S/N (1997), 31" Table, (4) Hold Downs, Type 281, 23" 8-Channel Vibratory Bowl Feeder, 1.5kW 1 ACCU-SYSTEMS MODEL DD MANUAL DOWEL INSERTER, S/N , 9" Vibratory Bowl Feeder, Manual Insertion Gun, 110 volt UP CUT SAW 1 NORTHTECH MODEL NT-CS14L-53 14" UP ACTING SAW, S/N (2006), 10' Tiger Stop Length Gauging System MOULDEr 1 SCMI MODEL SUPERSET 23 5-HEAD MOULDER, S/N AB/ (1998), 9" x 4-3/4" Capacity, "BRLTB" Head Sequence, 9kW, 9kW, 9kW, 13kW, 9kW 1-13/16" Spindle, 6,000 RPM, fpm Variable Feed Drive, 2-Accurate ProSet Digital Scales, Mechanical Spindle Readouts QUANTITY OF SCM Moulder Tooling, Assorted Moulder Profile Tooling 4 To schedule an auction, please call Hilco Industrial at HILCO (44526)

SAWS POCKET HOLE MACHINE GRINDER PLANER SHAPERS ROUTER TABLE SAWS 1 ROCKWELL MODEL 12/14 12/14" TILTING

ARBOR UNISAW TABLE SAWS, Model 34-466 S/N KE2949, Model 34-461 S/N IR7831, 72" Rip Fence, Side Table

CASTLE MODEL TSM-21 UP ACTING POCKET HOLE MACHINE, S/N 62772, 30" x 15" Table, Foot Pedal VErTiCAL BAnD

5 HP 1 ROCKWELL MODEL 20 20" VERTICAL BAND SAW, S/N 1754514, with 24" x 19" Tilting Table 1 CRAFTSMAN

110 volt Partial Listing Only, Please Visit Our Website www.hilcoind.

PLAnEr 1 SCMI MODEL S-63 24" THICKNESS PLANER, S/N KF002339, 9" Thickness Capacity, Dust Collector Port,

110-HP10 SINGLE SPINDLE SHAPER (1982), Forest City Power Feed Model FCT-8, 40" x 32" Table 1 BEACH

5 SAWS POCKET HOLE MACHINE GRINDER PLANER SHAPERS ROUTER TABLE SAWS 1 ROCKWELL MODEL 12/14 12/14" TILTING ARBOR TABLE SAW, S/N , 84" Biessemeyer T-Square Fence, Table Extension 2 ROCKWELL 10" TILTING ARBOR UNISAW TABLE SAWS, Model S/N KE2949, Model S/N IR7831, 72" Rip Fence, Side Table Extension 1 10" TILTING ARBOR TABLE SAW, S/N , Grizzly G4176 Power Feed POCkET hole MAChinE 1 CASTLE MODEL TSM-21 UP ACTING POCKET HOLE MACHINE, S/N 62772, 30" x 15" Table, Foot Pedal VErTiCAL BAnD SAWS 1 NORFIELD MODEL 36 36" VERTICAL BAND SAW, S/N L, with 30" x 35" Table, Assorted Blades. 7.5 HP 1 ROCKWELL MODEL 20 20" VERTICAL BAND SAW, S/N , with 24" x 19" Tilting Table 1 CRAFTSMAN MODEL " VERTICAL BAND SAW, with 14" x 15" Table, 1/2 HP, Stand. 110 volt Partial Listing Only, Please Visit Our Website For Complete Lot Catalog PrOfiLE grinder 1 SCMI MODEL 746 PROFILE GRINDER, S/N 99D , 2 HP PLAnEr 1 SCMI MODEL S-63 24" THICKNESS PLANER, S/N KF002339, 9" Thickness Capacity, Dust Collector Port, Hand Wheel Thickness Adjustment ShAPErS 1 SAC MODEL TS.110-HP10 SINGLE SPINDLE SHAPER (1982), Forest City Power Feed Model FCT-8, 40" x 32" Table 1 BEACH MANUFACTURING SINGLE SPINDLE SHAPER, S/N 36004, 3 HP Motor, 39" x 23" Table router 1 SCMI MODEL R8 OVERARM INVERTED PIN ROUTER, S/N AN , 30" x 35" Table, Dual Side Table Extensions For more information, please visit us on the web at 5

WOODWORKING EQUIPMENT PAINT & FINISHING JOINTERS LAMINATION WOODWOrking EqUiPMEnT 1 OMAL MODEL JOLLYCOLLA HOT MELT SYSTEM, S/N 8215 (2008), with Manual

2-33" Side Extension Gauges, Both with 3- Spindles, Center Mechanical Readout, Top Mechanical Readout 1 BLUM MODEL MINIPRESS HINGE POCKET HOLE HINGE BOR- ING

5 HP, 2825/3425 RPM, Dual Side Table Extensions, 18" Cross Cut Capacity 1 HITACHI MODEL C15FB 15" MITRE SAW, S/N H900265 2 DEWALT 12" COMPOUND MITRE SAWS, Model

Belt Sander, Vacuum Pump, Routers, Disc Sanders, Saw Blades, Etc. Partial Listing Only, Please Visit Our Website www.hilcoind.

Filters, (2) CA Technologies Paint Sprayers and Gun 1 EAGLE 9" X 12' FLAMMABLE LIQUIDS STORAGE CABINET, S/N 1680, with Sprinkler, Top Exhaust QUANTITY OF PAINT

COLLECTION SYSTEM, S/N 63699, with Cyclone Separator, Two Particle Collection Bins, Bottom Discharge Chutes, Approx 30 HP Main Blower, 5 HP Secondary Blower

HC4942, with 1/3 HP, 110 volt, 1 ph LAMinATiOn EqUiPMEnT 1 MAR-BEL MODEL TTLS 4" LAMINATE SLITTER, S/N 2293, 1/3 HP, 110 volt 1 50" X 140" HYDRAULIC LAMINATION

6 WOODWORKING EQUIPMENT PAINT & FINISHING JOINTERS LAMINATION WOODWOrking EqUiPMEnT 1 OMAL MODEL JOLLYCOLLA HOT MELT SYSTEM, S/N 8215 (2008), with Manual Application Gun, 110 volt, 1 ph 2 OMAL MODEL INSERT C HINGE HOLE HINGE BORING MACHINES, S/N 9506 (2011), 2-40" Side Extensions with Gauges, S/N 7089 (2006), 2-33" Side Extension Gauges, Both with 3- Spindles, Center Mechanical Readout, Top Mechanical Readout 1 BLUM MODEL MINIPRESS HINGE POCKET HOLE HINGE BOR- ING MACHINE, 1HP 1 PORTER-CABLE MODEL " MANUAL DOVETAIL FIXTURE, S/N MATTISON MODEL 202 STRAIGHT LINE RIP SAW 1 DEWALT 14" RADIAL ARM SAW, 7.5 HP, 2825/3425 RPM, Dual Side Table Extensions, 18" Cross Cut Capacity 1 HITACHI MODEL C15FB 15" MITRE SAW, S/N H DEWALT 12" COMPOUND MITRE SAWS, Model DW705 S/N 88180, 4000 RPM, Model DW716 S/N , 3600 RPM, Both with Wood Stand and Side Extensions QUANTITY OF MISCELLANEOUS WOODWORKING EQUIPMENT, Including: Belt Sander, Vacuum Pump, Routers, Disc Sanders, Saw Blades, Etc. Partial Listing Only, Please Visit Our Website For Complete Lot Catalog PAinT & finishing EqUiPMEnT 1 EAGLE 15' X 24' ENCLOSED SPRAY BOOTH, S/N 1679, with Interval Timer, Lights, Bottom Side Filter, Top Filters, (2) CA Technologies Paint Sprayers and Gun 1 EAGLE 9" X 12' FLAMMABLE LIQUIDS STORAGE CABINET, S/N 1680, with Sprinkler, Top Exhaust QUANTITY OF PAINT SUPPORT EQUIPMENT Including: Manual Paint Spray Guns, Spray Pots and Tape & Paper Masking Applicator DUST COLLECTiOn SySTEM 1 HONEYVILLE MODEL HAL-16 DUST COLLECTION SYSTEM, S/N 63699, with Cyclone Separator, Two Particle Collection Bins, Bottom Discharge Chutes, Approx 30 HP Main Blower, 5 HP Secondary Blower JOinTErS 1 DELTA MODEL RJ-42 16" JOINTER 1 ROCKWELL MODEL " JOINTER, S/N , with Stand, 110 volt 1 ROCKWELL MODEL " DELUXE JOINTER, S/N HC4942, with 1/3 HP, 110 volt, 1 ph LAMinATiOn EqUiPMEnT 1 MAR-BEL MODEL TTLS 4" LAMINATE SLITTER, S/N 2293, 1/3 HP, 110 volt 1 50" X 140" HYDRAULIC LAMINATION PRESS, 16" Open Height, 26 Hydraulic Cylinders, Segmented Ram 1 EVANS-ROTORK MODEL " LAMINATION PINCH ROLLER, Run Out Table, 0.75 kw, 110 volt, Single Phase 6 To schedule an auction, please call Hilco Industrial at HILCO (44526)

SHOP EQUIPMENT STOCK MATERIALS MATERIAL HANDLING VEHICLES ShOP EqUiPMEnT 1 ROPER WHITNEY PEXTO 2" X 2" X 1/4" MANUAL ANGLE IRON SHEAR 1

S/N 892B911520152, 1600 RPM, Manual Clamp 2 BALDOR 6" DOUBLE END PEDESTAL BENCH GRINDERS, Model 7306D S/N F174, Model 7307D S/N F178, 1/2 HP, 1

229000 15" PEDESTAL DRILL PRESS, S/N 0739-W, 1/2 HP, 1725 RPM, 5/8" JT-3 Chuck, 110 volt, 1 ph 1 DELTA MODEL 11-950 TYPE 2 8" BENCH DRILL

Base Cabinet 1 MAKITA MODEL 2414NB 14" ABRASIVE CHOP SAW, S/N 009721, Manual Vise, Wood Table with Assorted Metal Lengths 1 12" X 18" X 3"

Pneumatic Sanders, Circular Saws, Jig Saws, Pneumatic Staplers, Heat Guns, Glue Guns, Etc.

Benches, Assembly Tables, Wooden Boxes, Cabinets, Grease Guns, Fans, Ladders, Etc.

Sheet Stock, Cabinets and Rolling Carts, with Accuride Drawer Slides, Hinges, Assorted Hardware and Assembly Items MATEriAL handling 1 YALE

LPG FORKLIFT TRUCK, S/N E187V09299W, 171" Lift, Side Shift, Three Stage Mast, 42" Forks, Overhead Guard, Solid Tires, 8,1XX Hours 2 ADVANCE

7 SHOP EQUIPMENT STOCK MATERIALS MATERIAL HANDLING VEHICLES ShOP EqUiPMEnT 1 ROPER WHITNEY PEXTO 2" X 2" X 1/4" MANUAL ANGLE IRON SHEAR 1 ROCKWELL MODEL EJ48C34T3K-W-CCW 6" DOUBLE END BENCH GRINDER, S/N , 1/2 HP, 110 volt 1 MILWAUKEE MODEL " CUT OFF SAW, S/N 892B , 1600 RPM, Manual Clamp 2 BALDOR 6" DOUBLE END PEDESTAL BENCH GRINDERS, Model 7306D S/N F174, Model 7307D S/N F178, 1/2 HP, 1 ph 1 CRAFTSMAN MODEL " PEDESTAL DRILL PRESS, S/N 0739-W, 1/2 HP, 1725 RPM, 5/8" JT-3 Chuck, 110 volt, 1 ph 1 DELTA MODEL TYPE 2 8" BENCH DRILL PRESS, S/N 9725, 1/4 HP, 1720 RPM, 3/8" Chuck, 110 volt, 1 ph 1 MODEL AG5B 5-SPEED PEDESTAL DRILL PRESS, S/N , 5/8" Chuck, 1/2 HP, Wood Base Cabinet 1 MAKITA MODEL 2414NB 14" ABRASIVE CHOP SAW, S/N , Manual Vise, Wood Table with Assorted Metal Lengths 1 12" X 18" X 3" BLACK GRANITE SURFACE PLATE 1 BANDING MACHINE, WITH TOOLS LARGE QUANTITY OF POWER TOOLS, Including: Hand Routers, Laminate Trim Routers, Pneumatic Sanders, Circular Saws, Jig Saws, Pneumatic Staplers, Heat Guns, Glue Guns, Etc. LARGE QUANTITY OF SHOP SUPPORT EQUIPMENT Including: Fall Restraints, Bar, Pipe & Spring Clamps, Vises, Cantilever and Wooden Racking, Work Benches, Assembly Tables, Wooden Boxes, Cabinets, Grease Guns, Fans, Ladders, Etc. MATEriAL LARGE QUANTITY OF RAW MATERIALS Including: Assorted Laminate Rolls and Sheets, in Various Sizes, Lengths, and Colors, Bundles Wood Sheet Stock, Cabinets and Rolling Carts, with Accuride Drawer Slides, Hinges, Assorted Hardware and Assembly Items MATEriAL handling 1 YALE MODEL GLC050ZGNGAE LB. LPG FORKLIFT TRUCK, S/N E187V09299W, 171" Lift, Side Shift, Three Stage Mast, 42" Forks, Overhead Guard, Solid Tires, 8,1XX Hours 2 ADVANCE LIFTS MODEL P LB. ELECTRIC SCISSOR LIFTS, S/Ns B, A, 4' x 8' Platform 1 JET 6,000 LB. PALLET JACK 1 CROWN 5,000 LB. PALLET JACK 4 6X2 SOLID WHEEL SWIVEL CASTER CASTERS 1 SET 60" FORKLIFT EXTENSION ATTACHMENT SOLiD SUrfACE EqUiPMEnT DEGREE SOLID SURFACE HEATING OVEN, 145" x 35" Capacity VEhiCLES 1 INTERNATIONAL MODEL ' BOX TRUCK, VIN AA182JHB14904 (1979), 236" Wheel Base, Manual Transmission 2 DODGE MODEL RAM 2500 LARAMIE SLT 3/4 TON PICKUP TRUCKS, VIN 3B7KF23D1VG ,1XX Miles, VIN 3B7KF23D3VG ,6xx Miles, (Both 1996), Bed Cap, Extended Cab, 4X4, Cummins Turbo Diesel 1 TOYOTA MODEL TACOMA PICKUP TRUCK, VIN JT4VN01D1K (1988), Bed Cap, Manual Transmission, 4X4, 252,3XX Miles For more information, please visit us on the web at 7

OVER 35 OFFICES THROUGHOUT NORTH, CENTRAL & SOUTH AMERICA, EUROPE, MIDDLE EAST, ASIA, AUSTRALIA HilcoTM Industrial ONLINE AUCTION Complete Custom Architectural Woodworking Company Online Bidding

206 Northbrook, IL 60062 All rights reserved Printed in USA GOL2475 IL License #444.000215 Please visit our website at www.hilcoind.com to review our complete terms and conditions.

All items will be sold as is, whereis without any warranties, expressed or implied.

Bidders are encouraged to thoroughly inspect the items on which they intend to bid prior to sale.

8 OVER 35 OFFICES THROUGHOUT NORTH, CENTRAL & SOUTH AMERICA, EUROPE, MIDDLE EAST, ASIA, AUSTRALIA HilcoTM Industrial ONLINE AUCTION Complete Custom Architectural Woodworking Company Online Bidding Opens: Wednesday, March 19 th 10AM Local Time Online Bidding Closes: Wednesday, March 26 th Denver, CO HILCO Industrial is a division of Hilco Global Headquarters 5 Revere Drive, Ste. 206 Northbrook, IL All rights reserved Printed in USA GOL2475 IL License # Please visit our website at to review our complete terms and conditions. Terms of Sale An 18% buyer's premium will be charged on all assets. The buyer s premium will be reduced to 16% for payments made by means of cash, cashier s check, company check (with bank letter of guarantee) or wire transfer within 48 hours of sale close. Everything will be sold online to the highest bidder for cash, in accordance with the Auctioneer s customary Terms of Sale, copies of which will be posted online. All items will be sold as is, whereis without any warranties, expressed or implied. Although obtained from sources deemed reliable, the Auctioneer makes no warranty or guarantee to the accuracy of the information herein contained. Bidders are encouraged to thoroughly inspect the items on which they intend to bid prior to sale. Absolutely no items will be removed until the day after the conclusion of the sale and payment is made in full. Subject to additions, deletions and prior sale. For updated information, please visit our website at for any change to date, sale process, terms and conditions and list of available assets. Payment: ALL PURCHASES MUST BE PAID IN FULL ON THE DAY OF THE AUCTION. If you intend to pay by wire transfer, we will accept payment the day after the sale ONLY IF a deposit of 25% of total purchases is made on the day of the sale. Contact our office for wire transfer instructions. Only cash, wire transfer or certified check, payable to Hilco Industrial will be accepted. Company checks payable to Hilco Industrial will be accepted only if accompanied by a bank letter of guarantee, (see sample letter below). All sales are subject to sales tax. Purchasers claiming exemptions from taxes must provide proof satisfactory to the Auctioneer of their entitlement to claim such exemptions. Sample Bank Letter (Bank Name) unconditionally guarantees payment to Hilco Industrial from (Company Name). This guarantee will be valid for purchases made at the Auction of Gold Plane Custom Cabinets on March 19-26, Follow Us on: A Hilco Global Company Vested in Your Success

Large Capacity Machining & Fabricating Facility

ONLINE AUCTION Equipment No Longer Needed in the Continuing Operations of PECo - Process Equipment Company Large Capacity Machining & Fabricating Facility Featuring CNC Horizontal Boring Mills, CNC Machining