M&J Products Ave. Penn Valencia, CA 91355

Transcription

1 3848 Ventura Blvd., Sherman Oaks, CA, 9423 P F M&J Products Ave. Penn Valencia, CA 9355 :00 AM Tuesday, March 3 th Your Bidder Number Here

2 TERMS OF SALE A deposit of 25% in cash, cashier s check or company check is required of each bidder for deposit only. Total to be paid within time specified by auctioneer and before removal of purchase. All purchases must be removed within period announced by auctioneer. All descriptions are believed to be correct, but no guarantees or warranties are made by auctioneer as to nomenclature or age. Everything sold on an as is basis. ALL SALES WILL BE SUBJECT TO LOCAL & STATE SALES TAX, AS WELL AS A 5% BUYERS PREMIUM ONSITE AND A 8% BUYERS PREMIUM ONLINE. Full and Final Payment must be made by cashier s check, wire transfer, cash or company check (accompanied by an acceptable bank letter) ONLY. If you are paying with a company check you MUST provide a bank letter, at the time of payment, worded accordingly: This letter is being written to confirm that {Enter name} Bank agrees to IRREVOCABLY GUARANTEE check number {x}, written from the account of {buyers name} for an amount up to {amount higher than what is successfully bid on at auction}. If your bank letter does not conform to this template, IT WILL NOT BE ACCEPTED. Wire Transfer Information: Wells Fargo Bank, N.A. 420 Montgomery St. San Francisco, CA 9404 Account Name: Tauber-Arons, Inc. Account# ABA# Please reference the name of the sale or the sale date and your Buyer Number. FOR THOSE CONDUCTING BUSINESS WITHIN CALIFORNIA: The only way to be exempt from sales tax is to give us a copy of your resale permit. We do not keep copies on file, and verbal recitations or written confirmations of your resale permit number are not sufficient. You must bring an actual hard copy for our office to keep. If you cannot provide a copy either before or during payment, you will be charged the sales tax. If you can provide a copy after payment is made, but within 2 days of the sale date, you will receive a sales tax refund. After 2 days, your sales tax will have been remitted to the State Board of Equalization, and steps will not be taken to retrieve that money for you. Notes: () If you are a manufacturer, your resale permit will not be accepted. A resale permit is valid only when you are buying the type of machinery that you are in the business of selling. So, if you are buying items that you do not routinely sell, we reserve the right to require additional proof, such as a copy of an ad. If your status is still unclear, we reserve the right to refuse your permit. FOR THOSE CONDUCTING BUSINESS OUTSIDE OF CALIFORNIA: The only way to be exempt from sales tax is to provide us with a SIGNED Bill of Lading (from a common carrier only) proving that your equipment has crossed state lines. The State Board of Equalization doesn t accept resale permits from other states. As you will not be able to provide a Bill of Lading until after the items have been moved, and therefore, after payment, you must pay the sales tax. When you fax a copy of your Bill of Lading to our office ( ), a refund check will be promptly sent. However, if you don t provide us with a copy within 2 days of the sale, your tax money will have been submitted to the State Board, and we will not take steps to retrieve it for you. Please note: if you send us a wire transfer for payment without including the sales tax, and before providing a Bill of Lading, your items will not be allowed to leave the sale site until the situation is corrected. There are no exceptions to this. Note to International Buyers: Unfortunately, we cannot accept Bills of Lading for items being exported to Mexico, or any other country. If you are exporting equipment to another country, you must pay the sales tax, unless you move through another U.S. state first, and can provide us with a Bill of Lading showing the items have moved to Arizona, or Texas, etc. Valencia, CA Sales Tax: 9.5%

3 LOT REMOVAL DATES: Tuesday, March 3 th THRU Tuesday, March 20 th 8 AM to 4 PM, Mon-Fri. Only Buyers are responsible for removal, including rigging, labor and equipment. Please Note: There will be a $500 per day fee for entry into the facility after the set time for check out has elapsed.* *EXCEPT FOR ITEMS SPECIFICALLY NOTED BY THE AUCTIONEER AT TIME OF SALE.

4 Tauber-Arons Inc Ventura Blvd. Sherman Oaks, CA 9423 Phone: Fax: M&J_Products 3/3/208 LOT # DESCRIPTION QUANTITY Ped. Shop Fans 7 2 (Lot) Racking & Shelving (Both Buildings) 3 (Lot) Hardware w/ Cart 4 (Lot) Aluminum Cart 5 (Lot) Cabinet w/ Contents 6 (Lot) (3) Carts w/ Contents 7 (Lot) Cart w/ Contents 8 Snap On Impact Wrench 9 Husky Impact Wrench 0 Craftsman Impact Wrenches 2 Impact Wrenches 2 2 (Lot) Power Tools 3 (Lot) Pneumatic Power Tools 4 Drill Chucks 2 5 (Lot) Inspection 6 DeVlieg Tool Setter w/ Vise & Table 7 (Lot) Collets 8 (Lot) Stops 9 (Lot) Stools 20 (Lot) End Mill Cutters 2 Kurt Angel Lock Mill Vise

5 M&J_Products 3/3/208 Tauber-Arons Inc. Page: 2 LOT # DESCRIPTION QUANTITY 22 Kurt Angel Lock Mill Vise 23 Kurt Angel Lock Mill Vise 24 Kurt Angel Lock Mill Vise 25 Kurt Angel Lock Mill Vise 26 Kurt Angel Lock Mill Vise 27 Kurt Angel Lock Mill Vise 28 Kurt Angel Lock Mill Vise 29 Kurt Angel Lock Mill Vise 30 Kurt Angel Lock Mill Vise 3 Kurt Angel Lock Mill Vise 32 Kurt Angel Lock Mill Vise 33 Kurt Angel Lock Mill Vise 34 Kurt Angel Lock Mill Vise 35 Kurt Angel Lock Mill Vise 36 (Lot) Stor Loc Tool Cabinet w/ Tooling 37 Haas VF0/50, 3-Axis V.M.C Haas Control, 20" x 32" x 30", 50 Taper, 7500 RPM Spindle, 30hp Spindle, Side Mount 30 ATC, Chip Auger, New 3/202; S/N SNK PC60V, 5-Axis V.M.C Fanuc 6IMC Control, 60" x 26" x 8", A&B Axis +/- 25 Degrees, 50 Taper Spindle, 5000 RPM, 20hp Geared Head Spindle, 2MB of Memory, Sold New in ; S/N Haas VF6TR, 5-Axis V.M.C. Haas Control, 64" x 32" x 40" (Extended Column) A-Axis +/- 20 Degrees, B Axis 360 Degrees, 50 Taper, 7500 RPM, 30hp, Coolant Through Spindle, 30 ATC, Chip Conveyor, New 8/2007; S/N Haas TR30 5-Axis Trunion 4 Haas VF6TR, 5-Axis V.M.C Haas Control, 64" x 32" x 40" (Extended Column) A-Axis +/- 20 Degrees, B Axis 360 Degrees, 50

6 M&J_Products 3/3/208 Tauber-Arons Inc. Page: 3 Taper, 7500 RPM, 30ho, 30 ATC Chip Conveyor, New 6/20; S/N Haas TR30 5-Axis Trunion 43 Haas VF7/50, 3-Axis V.M.C Haas Control, 84" x 32" x 30",50 Taper, 7500 RPM, 30hp Motor, Coolant Though Spindle, 30 + Side Mount Tool Changer, Chip Conveyor, New 3/2008; S/N Okuma & Howa 852VPF/20, 5-Axis, 20" x 33.5" x 27.5" A&B Axis +/- 30 Degrees, Glass Scales A&B Axis, 40hp Spindle, 6000 RPM, 50 Taper, 2 Tool ATC, 4000 Ft of Extended Memory, 6th Axis Control Drive Unit and Connection for Rotary Tables, Chip Conveyor, New 2002; S/N Taper Mill Adaptors Taper Mill Adaptors Taper Mill Adaptors Taper Mill Adaptors Taper Mill Adaptors Taper Mill Adaptors Taper Mill Adaptors Portable Tool Cart 53 Portable Tool Cart 54 (Lot) Steel Tables (Both Buildings) 55 (202) Kaesar mod. AS30, 30hp Rotary Screw Air Compressor w/ Receiver, 25 CFM; S/N Magnolia Air Receiver 57 Curtis Air Dryer 58 Curtis mod. R825V, 25hp Rotary Screw Air Compressor & Dryer, 04 CFM w/ Receiver; S/N Compare Hydrovane 20hp Rotary Screw Air Compressor; S/N 088K Toyota mod. 7FGCU25, 5000lb. LPG Forklift S/N 69950

7 M&J_Products 3/3/208 Tauber-Arons Inc. Page: 4 LOT # DESCRIPTION QUANTITY 6 Yale mod. GLC060VXNVSE088, 6000lb. LPG Forklift S/N A90V07207D 6a Duro 4" Vertical Band Saw 62 Jet 6" Belt Sander 63 Craftsman 3/4hp Double End Grinder 64 Central Doulble End Grinder 65 (203) Air Flow 4' x 6' Downdraft Bench 66 First 2hp Vertical Mill w/ Digital Readouts 67 Cincinnati 20V20, 5-Axis V.M.C. Travels: 20" x 30" x 24", A&B Axis +/- 50 Degrees Rack and Pinon Drive, Retrofitted in 204 with A MS-Tech 800U 5-Axis CNC Control, Machine Originally Built In 2/993; S/N 3236C Okuma & Howa 852VPF/80, 5-Axis V.M.C. Fanuc 5M, 80" x 33.5"x 27.5" A&B Axis +/- 30 Degrees, 40hp Spindle, Glass Scales, 50 Taper, 6000 RPM, Chip Conveyor, Rebuilt by Studwell 204 Including New Spindle, Original Purchase Date 7/998; S/N SNK FSP-80V 5-Axis V.M.C. Titanium Milling Machining Center, Fanuc 3IAS CTRL, 90.5" x 33" x 27.5", A&B Axis +/- 30 Degrees, 4000 RPM, 50 Taper, 40hp, 40 Tool ATC, Chip Conveyor, Installed New 2/203, w/ Vaxuum Pump; S/N Arbor Press 7 Dorian Tool Setter 72 2' x 3' Granite Surface Plate 73 (200) Hexagon Romer mod. RA7525 Portable C.M.M. S/N UC 74 (Lot) Inspection Equipment 75 Standridge 4' x 6' Granite Surface Plate 76 McKenna XL Transfer Unit