TUESDAY, OCTOBER 24, 2017 *** 1:00 P.M. EDT *** TERMS & CONDITIONS

Transcription

1 TUESDAY, OCTOBER 24, 2017 *** 1:00 P.M. EDT *** WELCOME TO THE AUCTION SALE OF TURNING POINT CNC INC. 600 YORK STREET, OAKVILLE, ONTARIO, CANADA, L6L 4B3 TERMS & CONDITIONS FINAL PAYMENT IN FULL IMMEDIATELY AFTER THE AUCTION A BUYER S PREMIUM OF 16.0% FOR ALL ONSITE BIDDERS AND 18.0% FOR ALL WEBCAST (REMOTE) BIDDERS WILL APPLY AT THIS SALE NO PAYMENTS WILL BE ACCEPTED BY OUR SITE SUPERVISOR REMOVAL DETAILS: SMALL ITEMS NO LATER THAN 5:00 PM ON WEDNESDAY, OCTOBER 25, 2017 REMAINING ITEMS NO LATER THAN 5:00 PM TUESDAY, OCTOBER 31, 2017 CI DESIGNATES THAT A PROPER CERTIFICATE OF INSURANCE, ADDING CORPORATE ASSETS INC. AS AN ADDITIONAL INSURED AND A WORKERS COMPENSATION CLEARANCE CERTIFICATE, IS REQUIRED BEFORE ANY ITEM MARKED CI CAN BE MECHANICALLY REMOVED. FURTHERMORE, PROPERLY AUTHORIZED RIGGER RELEASE INSTRUCTIONS, IN WRITING, ARE REQUIRED BEFORE A RIGGER CAN COMMENCE REMOVAL OF THESE ITEMS POSTED LOADING FEES FOR ALL MAJOR ITEMS ARE NON NEGOTIABLE AND WILL BE AUTOMATICALLY ADDED ONTO THE SUCCESSFUL BIDDER S INVOICE. THERE ARE NO EXCEPTIONS! PLEASE BID ACCORDINGLY! POSTED LOADING FEES ARE NOT SUBJECT TO BUYERS PREMIUM. PACKAGING AND SHIPPING FOR ALL ITEMS INCLUDING SMALL LOTS IS AVAILABLE UPON REQUEST. AN ADDITIONAL FEE MAY APPLY. ANY ADDITIONAL ITEMS, NOT PRICED IN THE CATALOG, WILL BE CHARGED UPON BUYER REQUEST AT A RATE OF EITHER $25.00 CAD PER LIFT OR $ CAD PER HOUR WITH A MINIMUM $10 CAD HANDLING CHARGE FOR SMALL LOTS. ALL BUYERS ARE ENCOURAGED TO CONTACT THE EXCLUSIVE RIGGER REPRESENTATIVE FOR A FIRM QUOTE. SPECIALTY PACKAGING MATERIALS I.E. SKIDS, CRATES, BOXES, SOFT WRAPPING, ETC. WILL BE BILLED EXTRA IF REQUIRED AND/OR AS REQUESTED BY THE BUYER. ALL PRICES ARE AS LOADED, AT THE DOOR, ON A BUYER SUPPLIED FLATBED TRUCK OR TRAILER. ALL IN ACCORDANCE WITH THE TERMS AND CONDITIONS OF SALE TRANSPORTATION IS AVAILABLE AT EXTRA COST THROUGH THIRD PARTY SUPPLIER. NO ITEMS MAY BE REMOVED WHILE THE AUCTION IS IN PROGRESS. ALL REMOVAL IS STRICTLY BY APPOINTMENT ONLY - ALL BUYERS MUST COMPLY WITH ALL POSTED TERMS AND CONDITIONS OF SALE. NO EXCEPTIONS! THE EXCLUSIVE RIGGER FOR THIS SALE: JADE TOOLING CONTACT: AL STRATTON PHONE: THANK YOU 74 Berkeley Street, Toronto, Ontario, M5A 2W7 Tel Fax: NOW ACCEPTING: Visit for specific terms and conditions.

2 1 1 KING CANADA 6" BENCH GRINDER 2 1 KING CANADA 6" BENCH GRINDER 3 1 AMROX 8" BENCH GRINDER 4 1 LOT/ ENDMILLS 5 1 LOT/ ENDMILLS 6 1 LOT/ REAMERS 7 1 LOT/ TAPS 8 1 LOT/ DRILLS 9 1 LOT/ DRILLS 10 1 ELECTRIC DIE GRINDER 11 1 LOT/ COLLETS 12 1 MAGNETIC PLATE 13 1 ECLIPSE DE-MAGNETIZER 14 1 MAGNETIC CHUCK 15 1 LOT/ 50 TAPER TOOL HOLDERS 16 1 LOT/ THREADING HEADS 17 1 LOT/ THREADING HEADS 18 1 LOT/ THREADING HEADS 19 1 LOT/ THREADING HEADS 20 1 LOT/ THREADING HEADS 21 1 LOT/ THREAD CHASERS 22 1 LOT/ HAND TOOLS 23 1 LOT/ HAND TOOLS 24 1 LOT/ ALLEN KEYS 25 1 LOT/ HAND TOOLS 26 1 LOT/ C-CLAMPS 27 1 LOT/ PULLERS 28 1 LOT/ COLLETS 29 1 LOT/ BROACHES AND DIES 30 1 LOT/ BROACHES AND GUIDES 31 1 LOT/ TOOL HOLDERS 32 1 DREMEL KIT 33 1 PNEUMATIC RATCHET 34 1 TELCO TAPPER 35 1 LOT/ TAPPING HEADS 36 1 LOT/ 40 TAPER TOOL HOLDERS 37 1 LOT/ 40 TAPER TOOL HOLDERS 38 1 LOT/ TOOL POST TOOL HOLDERS 39 1 LOT/ BENCH VISES 40 1 LOT/ TOOL HOLDER PRESETTERS 41 1 LOT/ AIR ELECTRONIC GAUGE 42 1 LOT/ SURPLUS EQUIPMENT 43 1 SCALE 44 1 GRAVOGRAPH IM4 AUTOMATIC ENGRAVER 45 1 GRAVOGRAPH IM4 AUTOMATIC ENGRAVER 46 1 LOT/ DRILLS 47 1 LOT/ CENTERS 48 1 LOT/ CENTERS 49 1 LOT/ CENTERS 50 1 LOT/ DRILL CHUCKS 51 1 LOT/ LATHE TOOLING 52 1 LOT/ LATHE TOOLING 53 1 LOT/ LATHE TOOLING 54 1 LOT/ LATHE TOOLING 55 1 LOT/ LATHE TOOLING 56 1 LOT/ LATHE TOOLING 57 1 LOT/ FACE MILLS 58 1 LOT/ FACE MILLS 59 1 LOT/ BORING BARS 60 1 LOT/ BORING BARS 61 1 LOT/ LATHE TOOLING 62 1 LOT/ CUTTERS 63 1 LOT/ CARBIDE INSERTS 64 1 LOT/ CARBIDE INSERTS 65 1 LOT/ CARBIDE INSERTS 66 1 LOT/ CARBIDE INSERTS 67 1 LOT/ CARBIDE INSERTS 68 1 LOT/ CARBIDE INSERTS 69 1 LOT/ CARBIDE INSERTS 70 1 LOT/ CARBIDE INSERTS 71 1 LOT/ CABINET WITH DRILLS 72 1 LOT/ TOOLBOX WITH 73 1 LOT/ TOOLBOX WITH 74 1 ACCU-FINISH SERIES II DIAMOND WHEEL TOOL AND CUTTER SHARPENER, S/N AB

3 75 1 RIDGID 802 PORTABLE PIPE AND BOLT POWER THREADING MACHINE WITH 1/8"-2" PIPE TREADING CAPACITY, 1/4"-2" BOLT THREADING CAPACITY, AUTOMATIC 4-JAW FRONT CHUCK, AUTOMATIC 3-JAW REAR CHUCK, POSITIVE LOCKING 5 FLUTE REAMER, PARTING CUTTER, S/N R 1 RIGGING FEE FOR LOT #75 - JADE TOOLING - $25.00 PLUS 76 1 ARCWELD WELDING POWER SOURCE 76R 1 RIGGING FEE FOR LOT #76 - JADE TOOLING - $25.00 PLUS 77 1 LINCOLN ELECTRIC IDEALARC-250 ARC WELDER 77R 1 RIGGING FEE FOR LOT #77 - JADE TOOLING - $25.00 PLUS 77A 1 ARCWELD WELDING POWER SOURCE 77AR 1 RIGGING FEE FOR LOT #77A GRANITE 10" ROLL IN VERTICAL BAND SAW, S/N N/A (CI) 78R 1 RIGGING FEE FOR LOT #78 - JADE TOOLING - $25.00 PLUS 79 1 BAXTER VERTICUT 10" ROLL IN VERTICAL BAND SAW, S/N N/A (CI) 79R 1 RIGGING FEE FOR LOT #79 - JADE TOOLING - $25.00 PLUS 80 1 HARIG SUPER 612 CONVENTIONAL SURFACE GRINDER WITH 6"X12" MAGNETIC CHUCK, S/N N/A (CI) 80R 1 RIGGING FEE FOR LOT #80 - JADE TOOLING - $25.00 PLUS 81 1 DOALL VS612-1 CONVENTIONAL SURFACE GRINDER WITH 6"X12" MAGNETIC CHUCK, S/N (CI) 81R 1 RIGGING FEE FOR LOT #81 - JADE TOOLING - $25.00 PLUS 82 1 MAKINO C-40 PRECISION TOOL AND CUTTER GRINDER, S/N E (CI) 82R 1 RIGGING FEE FOR LOT #82 - JADE TOOLING - $25.00 PLUS 83 1 RTC RTC-690 FLOOR TYPE COMBINATION 6" BELT, 9" DISC SANDER, S/N (CI) 83R 1 RIGGING FEE FOR LOT #83 - JADE TOOLING - $25.00 PLUS 84 1 BALDOR 500 DOUBLE END PEDESTAL TOOL GRINDER, S/N F380 (CI) 84R 1 RIGGING FEE FOR LOT #84 - JADE TOOLING - $25.00 PLUS 85 1 DAREX SP2500 PRECISION TOOL AND CUTTER GRINDER, S/N A (CI) 85R 1 RIGGING FEE FOR LOT #85 - JADE TOOLING - $25.00 PLUS 86 1 HARDINGE HLV-H PRECISION TOOL ROOM LATHE WITH 11" SWING, 18" DISTANCE BETWEEN CENTERS, SPEEDS TO 3000 RPM INFINITELY VARIABLE, POWER SADDLE, 5" 3-JAW CHUCK, HEIDENHAIN 2 AXIS DRO, IN/ MM THREADING, COOLANT, COMPLEMENT OF CHUCKS, COLLETS AND TOOLING, S/N HLV- H-5617-L (CI) 86R 1 RIGGING FEE FOR LOT #86 - JADE TOOLING - $ PLUS 87 1 COLLET PRESETTER 88 1 COLLET PRESETTER 89 1 LOT/ LATHE CHUCKS 90 1 LOT/ LATHE CHUCKS 91 1 LOT/ COLLETS 92 1 LOT/ COLLETS 93 1 LOT/ COLLETS 94 1 LOT/ COLLETS 95 1 LOT/ LATHE ACCESSORIES 96 1 LOT/ LATHE ACCESSORIES 97 1 CLAUSING KONDIA KV CNC VERTICAL TURRET MILLING MACHINE WITH DYNAPATH DELTA 10 CNC CONTROL, 42" X 11.75" TABLE, SPEEDS TO 4000 RPM INFINITELY VARIABLE, POWER DRAW BAR, 40 TAPER, COOLANT, S/N T-78 (CI) 2

4 97R 1 RIGGING FEE FOR LOT #97 - JADE TOOLING - $ PLUS 98 1 MATSUURA RA-4G TWIN PALLET CNC VERTICAL MACHINING CENTER WITH YASNAC SYSTEM I80 CNC CONTROL, 39.25" X 19.25" PALLETS, TRAVELS X-40.15", Y-21.65", Z-20.08", SPEEDS TO 8000 RPM, 26 HP, BT50, 30 STATION ATC, COOLANT THROUGH SPINDLE, CHIP CONVEYOR, S/N (CI) 98R 1 RIGGING FEE FOR LOT #98 - JADE TOOLING - $3, PLUS " X 19" SUB TABLE 99R 1 RIGGING FEE FOR LOT #99 - JADE TOOLING - $ PLUS KVA TRANSFORMER (CI) 100R 1 RIGGING FEE FOR LOT # MATSUURA MC-800 VF CNC 5 AXIS VERTICAL MACHINING CENTER WITH FANUC SERIES 15M CNC CONTROL, 45" X 16" TABLE, TRAVELS X-31.5", Y-17.30", Z-19", SPEEDS TO 8000 RPM, 15 HP, BT40, 30 STATION ATC, HIGH PRESSURE COOLANT THROUGH SPINDLE, CHIP TRAY, TSUDAKOMA TRNC CNC 4TH&5TH AXIS TILT & ROTATE TABLE (MAY BE SOLD SEPARATELY) S/N (CI) 101R 1 RIGGING FEE FOR LOT #101 - JADE TOOLING - $2, PLUS KVA TRANSFORMER (CI) 102R 1 RIGGING FEE FOR LOT # MATSUURA MC-600 V CNC VERTICAL MACHINING CENTER WITH YASNAC SYSTEM MX3 CNC CONTROL, 34.5" X 15.75" TABLE, TRAVELS X-23.62", Y-16.14", Z-18.50", SPEEDS TO 7000 RPM, 20 HP, 40 TAPER, 20 STATION ATC, COOLANT, CHIP TRAYS, S/N (CI) 103R 1 RIGGING FEE FOR LOT #103 - JADE TOOLING - $1, PLUS MATSUURA MC-600H-45 TWIN PALLET CNC HORIZONTAL MACHINING CENTER WITH FANUC SYSTEM 6M CNC CONTROL, 16.5"X16.5" PALLETS, TRAVELS X-23.60", Y-17.70", Z-18.90", SPEEDS TO 6000 RPM, 15 HP, 40 TAPER, 50 STATION ATC,.001 DEGREE INDEXING, COOLANT, CHIP AUGER, S/N (CI) 104R 1 RIGGING FEE FOR LOT #104 - JADE TOOLING - $2, PLUS KVA TRANSFORMER (CI) 105R 1 RIGGING FEE FOR LOT # MATSUURA MC-600H-45 TWIN PALLET CNC HORIZONTAL MACHINING CENTER WITH FANUC SYSTEM 11M CNC CONTROL, 17.5"X17.5" PALLETS, TRAVELS X-23.60", Y-17.70", Z-18.90", SPEEDS TO 6000 RPM, 15 HP, 40 TAPER, 50 STATION ATC,.001 DEGREE INDEXING, COOLANT THROUGH SPINDLE, CHIP AUGER, S/N (CI) 106R 1 RIGGING FEE FOR LOT #106 - JADE TOOLING - $2, PLUS 106A 1 NIKKEN KOSAKUSHO WORKS 5AX-230 4TH AXIS 106AR 1 RIGGING FEE FOR LOT #106A - 106B 1 4TH AXIS 106BR 1 RIGGING FEE FOR LOT #106B YANG MV-3A CNC VERTICAL MACHINING CENTER WITH FANUC SERIES O-M CNC CONTROL, 35.40" X 20.70" TABLE, TRAVELS X-30", Y-17.70", Z-19.70", SPEEDS TO 6000 RPM, 10 HP, 40 TAPER, 20 STATION ATC, COOLANT, CHIP TRAYS, S/N N00202 (CI) 3

5 107R 1 RIGGING FEE FOR LOT #107 - JADE TOOLING - $1, PLUS KVA TRANSFORMER (CI) 108R 1 RIGGING FEE FOR LOT # TOPRING ALASKA CHILLER UNIT " MACHINE VISE " MACHINE VISE " MACHINE VISE " MACHINE VISE " MACHINE VISE " MACHINE VISE " MACHINE VISE " MACHINE VISE LOT/ MACHINE VISES " SWIVEL MACHINE VISE " SWIVEL MACHINE VISE " SWIVEL MACHINE VISE " SWIVEL MACHINE VISE " SWIVEL MACHINE VISE " SWIVEL MACHINE VISE " MACHINE VISE " MACHINE VISE CHICK QWIK LOK 4" MACHINE VISE CHICK QWIK LOK 4" MACHINE VISE HOMGE DOUBLE LOCK 4" MACHINE VISE LOT/ VISES LOT/ VISES LOT/ ANGLE PLATES POWER ROTARY TABLE HORIZONTAL/VERTICAL 12" ROTARY TABLE WITH STEADY REST HORIZONTAL 12" ROTARY TABLE CAT40/BT40 TOOL HOLDERS CAT40/BT40 TOOL HOLDERS CAT40/BT40 TOOL HOLDERS CAT40/BT40 TOOL HOLDERS CAT40/BT40 TOOL HOLDERS CAT40/BT40 TOOL HOLDERS CAT40/BT40 TOOL HOLDERS CAT40/BT40 TOOL HOLDERS CAT40/BT40 TOOL HOLDERS CAT40/BT40 TOOL HOLDERS CAT40/BT40 TOOL HOLDERS CAT40/BT40 TOOL HOLDERS CAT40/BT40 TOOL HOLDERS CAT40/BT40 TOOL HOLDERS CAT40/BT40 TOOL HOLDERS CAT40/BT40 TOOL HOLDERS CAT40/BT40 TOOL HOLDERS CAT40/BT40 TOOL HOLDERS CAT40 TOOL HOLDERS CAT40 TOOL HOLDERS CAT40 TOOL HOLDERS CAT40 TOOL HOLDERS CAT40 TOOL HOLDERS CAT40 TOOL HOLDERS CAT40 TOOL HOLDERS CAT40 TOOL HOLDERS CAT40 TOOL HOLDERS CAT40 TOOL HOLDERS CAT40 TOOL HOLDERS CAT40 TOOL HOLDERS CAT40 TOOL HOLDERS CAT40 TOOL HOLDERS CAT40 TOOL HOLDERS WASINO LJ-10 CNC TURNING CENTER WITH FANUC O-T CNC CONTROL, 9.84" MAX TURNING DIAMETER, 39.37" MAX TURNING LENGTH, 10" 3-JAW HYDRAULIC CHUCK, SPINDLE SPEEDS TO 3500 RPM, 12 STATION TURRET, HYDRAULIC TAILSTOCK, COOLANT, CHIP TRAY, S/N 959 (CI) 169R 1 RIGGING FEE FOR LOT #169-4

6 KVA TRANSFORMER (CI) 170R 1 RIGGING FEE FOR LOT # WASINO LJ-102M CNC TURNING AND MILLING CENTER WITH FANUC SYSTEM 10T CNC CONTROL, 9.84" MAX TURNING DIAMETER, 39.37" MAX TURNING LENGTH, 10" 3-JAW HYDRAULIC CHUCK, SPINDLE SPEEDS TO 3500 RPM, MILLING SP SPEEDS TO 3000 RPM, 12 STATION TURRET, LIVE MILLING, HYDRAULIC TAILSTOCK, COOLANT, CHIP TRAY, S/N 314 (CI) 171R 1 RIGGING FEE FOR LOT # LOT/ WASINO CHUCKS AND BACKING PLATES KVA TRANSFORMER (CI) 173R 1 RIGGING FEE FOR LOT # WASINO LJ-63M CNC TURNING AND MILLING CENTER WITH FANUC SYSTEM 10T CNC CONTROL, 9.84" MAX TURNING DIAMETER, 24.41" MAX TURNING LENGTH, 10" 3-JAW HYDRAULIC CHUCK, SPINDLE SPEEDS TO 3500 RPM, MILLING SPEEDS TO 3000 RPM, 12 STATION TURRET, C-AXIS, LIVE MILLING, HYDRAULIC TAILSTOCK, COOLANT, CHIP TRAY, S/N 310 (CI) 174R 1 RIGGING FEE FOR LOT # KVA TRANSFORMER 175R 1 RIGGING FEE FOR LOT # WASINO LJ-62M CNC TURNING AND MILLING CENTER WITH FANUC SYSTEM 10T CNC CONTROL, 9.84" MAX TURNING DIAMETER, 24.41" MAX TURNING LENGTH, 10" 3-JAW HYDRAULIC CHUCK, SPINDLE SPEEDS TO 3500 RPM, MILLING SPEEDS TO 3000 RPM, 12 STATION TURRET, LIVE MILLING, HYDRAULIC TAILSTOCK, COOLANT, CHIP TRAY, S/N 368 (CI) 176R 1 RIGGING FEE FOR LOT # KVA TRANSFORMER (CI) 177R 1 RIGGING FEE FOR LOT # LOT/ LIVE MILLING TOOL HOLDERS LOT/ TURNING CENTER TOOL HOLDERS LOT/ TURNING CENTER TOOL HOLDERS LOT/ TURNING CENTER TOOL HOLDERS SLEEVES LOT/ TURNING CENTER TOOL HOLDERS SLEEVES LOT/ CHUCK JAWS LOT/ CHUCK JAWS 184A 1 LOT/ COLLETS 184B 1 LOT/ COLLETS 184C 1 LOT/ COLLETS 184D 1 LOT/ HYDRAULIC CHUCK KEYS 184E 1 LOT/ JAWS 184F 1 LOT/ JAWS 184G 1 LOT/ JAWS 184H 1 LOT/ JAWS 184I 1 LOT/ JAWS 184J 1 LOT/ JAWS 184K 1 LOT/ JAWS 184L 1 LOT/ JAWS 184M 1 LOT/ JAWS 184N 1 LOT/ JAWS 5

7 184P 1 LOT/ JAWS LOT/ TURNING CENTER ACCESSORIES MIYANO JNC-60 CNC TURNING CENTER WITH FANUC O-T CNC CONTROL, 9.75" MAX TURNING DIAMETER, 18.25" MAX TURNING LENGTH, 10" 3-JAW HYDRAULIC CHUCK, SPINDLE SPEEDS TO 3000 RPM, 8 STATION TURRET, HYDRAULIC TAILSTOCK, COOLANT, CHIP TRAY, S/N JN (CI) 186R 1 RIGGING FEE FOR LOT # KVA TRANSFORMER 187R 1 RIGGING FEE FOR LOT # LOT/ TURNING CENTER TOOL HOLDERS YANG EAGLE 12 GANG TYPE CNC LATHE WITH FANUC O-TD CNC CONTROL, 12.99" SWING OVER BED, 5.35" SWING OVER SLIDE, TRAVELS X-9.05" Z-9.05", SPEEDS TO 3000 RPM, COLLET CHUCK, SPARE KITAGAWA 6" 3-JAW HYDRAULIC CHUCK, COOLANT, CHIP CONVEYOR, S/N N/A (CI) 189R 1 RIGGING FEE FOR LOT #189 - JADE TOOLING - $ PLUS LOT/ TOOLING AND ACCESSORIES LOT/ TOOLING AND ACCESSORIES KVA TRANSFORMER (CI) 192A 1 10" 3 JAW HYDRAULIC CHUCK 192B 1 10" 3 JAW HYDRAULIC CHUCK 192C 1 10" 2 JAW HYDRAULIC CHUCK 192D 1 10" 2 JAW HYDRAULIC CHUCK 192E 1 6" 3 JAW HYDRAULIC CHUCK 192F 1 19" 4 JAW CHUCK 192G 1 16" 4 JAW CHUCK 192H 1 16" 4 JAW CHUCK 192J 1 16" 4 JAW CHUCK 192K 1 14" 4 JAW CHUCK 192L 1 12" 4 JAW CHUCK 192M 1 10" 3 JAW CHUCK 192N 1 11" 3 JAW CHUCK 192O 1 10" 3 JAW CHUCK 192P 1 4 JAW CHUCK 192Q 1 3 JAW CHUCK 192R 1 4 JAW CHUCK 192S 1 3 JAW CHUCK 192T 1 INDEXING HEAD GIDDINGS & LEWIS D12 BRIDGE TYPE COORDINATE MEASURING MACHINE WITH NIKON METROLOGY (UPGRADED 2011) CMM-MANAGER V 3.0 SOFTWARE AND DONGLE, RENISHAW MIP TOUCH PROBE, 37.75"X21.75" DRILLED AND TAPPED STEEL TABLE, 28" BETWEEN HOUSINGS, 22" MAX HEIGHT UNDER THE BRIDGE, S/N P (CI) 193R 1 RIGGING FEE FOR LOT #193 - JADE TOOLING - $1, PLUS LOT/ OUTSIDE MICROMETERS LOT/ OUTSIDE MICROMETERS LOT/ OUTSIDE MICROMETERS LOT/ GAUGE BLOCKS LOT/ GAUGE BLOCKS LOT/ ROUGHNESS SPECIMENS FOWLER XT-HOLEMATIC LOT/ INSIDE MICROMETERS LOT/ INTERNAL THREAD GAUGES LOT/ DIAL INDICATORS LOT/ GAUGE BLOCKS LOT/ GAUGE BLOCKS LOT/ DEPTH GAUGE SET LOT/ DIAL INDICATOR STANDS HEIGHT GAUGES HEIGHT GAUGES LOT/ INSPECTION EQUIPMENT LOT/ INSPECTION EQUIPMENT LOT/ INSPECTION EQUIPMENT 6

8 213 1 LOT/ DIAL INDICATOR STANDS LEITZ SIMPLEX MICROSCOPE WITH STAND LOT/ CABINET WITH INSPECTION EQUIPMENT GRANITE SURFACE PLATES " X 10" GRANITE SURFACE PLATE TOYOTA 42-3FGC15 LPG FORKLIFT WITH 2400 LBS CAPACITY, 185" REACH, 3-STAGE HIGH VISIBILITY MAST, SIDE SHIFT, CUSHION TIRES, S/N (CI) ARO 1/2 TON PNEUMATIC CHAIN ARO 1/4 TON PNEUMATIC CHAIN ARO 1/2 TON PNEUMATIC CHAIN ARO 1/4 TON PNEUMATIC CHAIN ARO 1/4 TON PNEUMATIC CHAIN ARO 1/4 TON PNEUMATIC CHAIN ARO 1/4 TON PNEUMATIC CHAIN ARO 1/4 TON PNEUMATIC CHAIN ARO 1/4 TON PNEUMATIC CHAIN CM 1/2 TON ELECTRIC CHAIN ARO 1/4 TON PNEUMATIC CHAIN CHAINFALL CHAIN FALL RAIL CM 1/2 TON ELECTRIC CHAIN CM 1/2 TON ELECTRIC CHAIN LOT/ CHAIN MOUNTS LEROY 25 HP TANK MOUNTED PISTON TYPE AIR COMPRESSOR, S/N N/A (CI) 235R 1 RIGGING FEE FOR LOT # INGERSOLL RAND SSR-EP5 5 HP SCREW TYPE AIR COMPRESSOR, S/N A01426U93298 (CI) 237R 1 RIGGING FEE FOR LOT # LOT/ SHOP CARTS LOT/ LADDERS LOT/ CABINET WITH LOT/ HIGHBOY CABINET WITH GRINDING WHEELS LOT/ (2) SECTIONS OF METAL SHELVING HANSEN AIR DRYER (CI) MEGA ELDORADE HYDRAULIC FLUID TANK (CI) 245R 1 RIGGING FEE FOR LOT # HD ADJUSTABLE RACKING MURRAY SNOWBLOWER WITH TECUMSEH MOTOR LOT/ TORCH CADDY WITH HOSE WORKBENCH WORKBENCH WORKBENCH WORKBENCH COOLJET SYSTEM ADJUSTABLE SHELVES ADJUSTABLE SHELVES ADJUSTABLE SHELVES LOT/ TOOL CABINET LOT/ ROLLING SHELF SYSTEM LOT/ HIGHBOY CABINET WITH HIGHBOY CABINET ADJUSTABLE SHELVING LOT/ TOOL CABINET WITH 262A 1 TOOL CABINET 262B 1 LOT/ TOOLING 7

9 263 1 LOT/ CREDENZA WITH ADJUSTABLE SHELVING PALLET TRUCK LOT/ TRANSFORMERS LOT/ HYDRAULIC POWER PACKS MATSUURA CONTROL CABINET DAIKIN AKS54K CHILLER HYDRAULIC POWER PACK LOT/ TOOL CABINET WITH LOT/ TOOL CABINET WITH LOT/ TOOL CABINET WITH LOT/ TOOL CABINET WITH LOT/ 50 TAPER TOOL HOLDERS LOT/ TOOL CABINET WITH KVA TRANSFORMER (CI) 277R 1 RIGGING FEE FOR LOT # KVA TRANSFORMER (CI) 278R 1 RIGGING FEE FOR LOT # KVA TRANSFORMER (CI) 279R 1 RIGGING FEE FOR LOT # KVA TRANSFORMER (CI) 280R 1 RIGGING FEE FOR LOT # KVA TRANSFORMER (CI) 281R 1 RIGGING FEE FOR LOT # KVA TRANSFORMER (CI) 282R 1 RIGGING FEE FOR LOT # KVA TRANSFORMER (CI) 283R 1 RIGGING FEE FOR LOT # PIGEON HOLE CABINET (NO ) LOT/ PIGEON HOLE CABINET WITH LOT/ SHELF WITH LOT/ WELDING CURTAINS LOT/ PIGEON HOLE CABINET WITH LOT/ PIGEON HOLE CABINET WITH LOT/ PIGEON HOLE CABINET WITH LOT/ SHELF WITH HARDWARE LOT/ SURPLUS EQUIPMENT STRAPPING CADDY LOT/ SURPLUS EQUIPMENT LOT/ TOOL HOLDERS PNEUMATIC PRESS SIMONIZ 2600PSI GAS POWERED PRESSURE WASHER FORK ATTACHMENT BARREL TIPPER LOT/ TOOL HOLDERS BOOK SHELVES DESK DESK DESK 8