1 Pallet Jack. 2 Dock Plate. 3 Presto Lift. 4 Winch & Charger. 5 No 3 1/2 Greenerd Arbor Press. 6 Pedistal Grinder. Stockwell Equipment Co.
|
|
- Lilian Flowers
- 6 years ago
- Views:
Transcription
1 Phone: 1 Pallet Jack. 2 Dock Plate. 3 Presto Lift 4 Winch & Charger. 5 No 3 1/2 Greenerd Arbor Press 6 Pedistal Grinder
2 Page: 2 7 Craftsman Pedistal Ginder 7a Lot of tools. 7b Mix lot tools, Clamps, measuring tools 8 Metal Table. 9 Metal table. 10 Rack and Steel Stock. 11 Lot of scrap 12 Stock Stand feeder
3 Page: 3 13 Dead skids 14 No 4 Davis Keyway cutter 15 Shelf and Contents 16 3 pry bars 17 No 3-36 Brown and Sharp Gear cutter. 18 Emerson 7" Horizontal Band Saw 19 Wells Metal Horizontal Band saw 20 Band saw blades
4 Page: Lot Bridgeport cutters. 22 Lot of clamps 22a Radius cutters 22b Misc. Bridgport tooling 22c Indexing head and tail stock. 23 Shelf 24 Yuasa Rotary table 25 UVT Angle table
5 Page: 5 26 Table 27 3 Stock stands 28 No. 2 Turret lathe. 29 Shelf and Contents 30 Federal 8-10" Micrometer 31 Accudyne Easy Tram for Bridgeport 32 Vernier. 33 Lathe tool and cutter holders.
6 Page: Micrometer large micrometers 3-4, 4-5, 5-6 inch 36 One set of 6"-12 inch micrometers new in box. 37 Sine Bar 38 NSK Vernier 39 4 Micrometers 40 Vankeure Block guages round 41 Brown & Sharpe Guages and Stand.
7 Page: 7 42 Guage and Stand. 43 Precision Parrallels 44 Vankeurin Block guages 45 Fowler Verinier 46 Vernier and Mike 47 Keyway Broaching set Minute man 48 Mitutoyo Vernier 48a Mitutoyo Vernier
8 Page: 8 48b Vernier larger 49 Letter & Number punch set. Hanson 50 Guages and granite stand 51 Lot of stands & Flat plate Height guages and Guage stands 53 Lot of Federal Guages. 54 Knurling tools 55 Shelf & Contents.
9 Page: 9 56 Carbide Tips 57 Misc. Guages 58 Collets, live centers and rack 59 4 jaw chuck 60 Quick Change tools 61 5C Collet Blocks 62 2 Square tool holders 63 Carbide Tool holders
10 Page: Rotary Indexing table Jaw chuck L00 taper. 66 Drill cabinets and contents Drill bit sets. 68 Large drill bit set with 3 small sets 69 Shelt and Contents 70 Belt Sander and Grinder 71 Double Ended Grinder
11 Page: Southben lathe 73 Leblond Lathe 74 Antique Tool Box 75 Antique Tool Box 76 Antique Tool Box 77 Antique Tool Box 78 Bench & Vice 79 Rules and Combination sets
12 Page: Vintage Calipers 81 Vintage Calipers and Compases 82 Vintage Calipers and Compasses 83 Baldor Double ended Grinder 115v 83a Mag light. 84 Arbor Press 85 Impact Gun 86 Cut Off Saw
13 Page: 13 86a Steel Top Table. 87 Drill Press With Tapping head 88 Arbor Press 89 Enco Chuck 90 Tool Box w Tools 91 Box Misc. Tools 92 Parrallels. 93 Kurt Vice 6"
14 Page: Yuasa Milling machine Chuck 6" 95 Bridgeport Milling Machine 96 Bridgeport 90 degree attachment. 97 Index Milling Machine. No vices 98 Clamp Set 99 Magnetic Chuck Walker ceramic 100 Indexing Collet Jig 101 Collet Jig
15 Page: Milling machine vice 103 Tello Tapping Head 104 Procunier Tapping Head 105 Rigid Tapping Head 105a Rack 106 Contents of Rack 107 Contents of Rack Remers and Drills 108 Lot of Milling machine clamps
16 Page: Remainder of contents on rack. 110 Steel Shelves Quantity: Delta Drill Press 112 Large Drill Press 113 Hendy Lathe " 114 Leblond Regal lathe with Taper attachment a Steady rest. Fits Leblond 115 Quick change Suzuki tool holder and attachments
17 Page: Quick Change tool holder with Attachments 117 Lot of 5C collets 118 Lot of hand files. 119 Lot of Jacobs chucks large Jacob chucks 121 lot of Drill chucks 121a Live Centers 121b Live centers
18 Page: Tap and Die Set 123 Lot of taps and dies, drills etc. 124 Steel shelf 125 Multiple Head drill press 126 Ward lathe with Turret attachement 127 Lot of drill and lathe tools 128 Buffalo Two headed drill press Benches
19 Page: a Old Machinery mover / Jbar 130 Belt lacing machine 131 Drill Press 132 Drill Press 133 Rack and Tins 134 Cart 135 Lot of Fans 136 Pallet Jack
20 Page: a Spill Kit 137 Hand truck 138 Strapping Cart 139 Metal tables Quantity: Vintage Parts draw 141 Contents of office 142 Scale 143 Contents on bench.
21 Page: Ladders 145 cart 145a 4 lamps 146 Saw blades 147 Band Saw 147a Blue bins 148 Leather Tote bins Quantity: Stock Cart
22 Page: Stock on rack 151 Rack 151a Mats in building 152 Set of Vntage lockers 153 Air Compressor 154 Weaver Air Compressor 155 Lincoln Arc Welder, Ideal Arc SP L-Tec Welding and Cutting System.
23 Page: Welding Table. 158 Oxy acetylene cart, hoses and guages 159 Lot of steel bins 160 Lot of steel bins 161 Lot of Welding Rods Welding Helmets 163 One new electric welding helmet 164 New 50 foot power cord for welder.
24 Page: Remainder of contents in room. excludes heater.
1 Pallet Jack. 2 Dock Plate. 3 Presto Lift. 4 Winch & Charger. 5 No 3 1/2 Greenerd Arbor Press. 6 Pedistal Grinder. Stockwell Equipment Co.
Phone: 1 Pallet Jack. 2 Dock Plate. 3 Presto Lift 4 Winch & Charger. 5 No 3 1/2 Greenerd Arbor Press 6 Pedistal Grinder Page: 2 7 Craftsman Pedistal Ginder 8 Metal Table. 9 Metal table. 10 Rack and Steel
More informationCLT Auctions. Manual & Light CNC Machine Shop. Ends from Mar 06, am EST (3pm GMT) Description
CLT Auctions Manual & Light CNC Machine Shop Ends from Mar 06, 2019 10am EST (3pm GMT) 4400 Friendship Dr STE C Matthews North Carolina 28105 United States Lot Description 1 MITEE-BITE T slot kit 2 Vise
More informationBIDITUP AUCTIONS & APPRAISALS VENTURA BLVD., SECOND FLOOR STUDIO CITY, CA (818) FAX (818)
This catalog is meant merely as a guide. The Auctioneers do not warrant the accuracy, genuineness, authenticity, description, weight, count or measure of any of the lots specified herein. Lot Qty. Description
More informationLARGE CAPACITY PRECISION CNC MACHINING, TURNING, BORING & MACHINE SHOP FACILITY
PUBLIC WEBCAST AUCTION LARGE CAPACITY PRECISION CNC MACHINING, TURNING, BORING & MACHINE SHOP FACILITY AUCTION: THURSDAY, APRIL 28 AT 10:00 AM CDT INSPECTION: WEDNESDAY, APRIL 27 FROM 8:00 AM TO 4:00 PM
More informationBIDITUP! An Industrial Assets Co VENTURA BLVD., SECOND FLOOR STUDIO CITY,CA (818) FAX (818)
This catalog is meant merely as a guide. The Auctioneers do not warrant the accuracy, genuineness, authenticity, description, weight, count or measure of any of the lots specified herein. Lot Heading Qty.
More informationKoster Industries, Inc.
Koster Industries, Inc. Rinaldi Precision Machine Co. Inc. - CNC Machine Shop Vertical machining centers, Leadwell, Fanus, CNC lathes, Johnford, Ikegai, Feeler speed lathe, Turret lathe, Vertical bandsaw,
More informationBIDITUP! An Industrial Assets Co VENTURA BLVD., SECOND FLOOR STUDIO CITY,CA (818) FAX (818)
This catalog is meant merely as a guide. The Auctioneers do not warrant the accuracy, genuineness, authenticity, description, weight, count or measure of any of the lots specified herein. Lot Heading Qty.
More informationLOT # QTY DESCRIPTION NOTES
1 1 MACHINE VISE 2 1 MACHINE VISE 3 1 MACHINE VISE 4 1 MACHINE VISE 5 1 MACHINE VISE 6 1 MACHINE VISE 7 1 METAL CART 8 1 - PNEUAMATIC IMPACT WRENCH & AIR CHISSEL 9 1 HOT PLATE 10 1 - SKILSAW & SAWZAWL
More informationMarch weeks. surcharge for
March weeks valid until 31.03.2012 all quoted prices are incl. 19% VAT for deliveries in the EU countries to customers with a valid VAT-no. and for deliveries in not EU member countries the VAT is not
More informationALLENAIR FLUID POWER DAY 2 BIDDING ENDS AUGUST 9 TH AT 10AM EDT
451 SECTION OF PALLET RACKING; (8) 8' HORIZONTAL BEAMS, (2) 12' UPRIGHTS WITH CONTENTS (NO ELECTRIC MOTORS) 451A 40' CONX BOX 452 SECTION OF PALLET RACKING; (6) 96'' HORIZONTAL BEAMS, 12' UPRIGHTS WITH
More informationno mm no Dividers with scriber 150 mm NEW Square wedge-shaped knife edges on the length side
Summer Promotion valid until 30.06.2013 all quoted prices are incl. VAT for deliveries to EU countries to customers with valid VAT-no. and for deliveries in non EU member countries the VAT is not applicable
More informationBIDITUP AUCTIONS & APPRAISALS VENTURA BLVD., SECOND FLOOR STUDIO CITY, CA (818) FAX (818)
This catalog is meant merely as a guide. The Auctioneers do not warrant the accuracy, genuineness, authenticity, description, weight, count or measure of any of the lots specified herein. Lot Heading Qty.
More informationName: Machine Tool Technology ( )
Name: Machine Tool Technology (58.0501) Directions: Evaluate the student by checking the appropriate number to indicate the degree of competency. Rating Scale (0-6): 0 No Exposure no experience/knowledge
More informationCLT Auctions. South Jersey Machine Shop. Ended Aug 16, :56am CDT. Description. Beverly New Jersey United States 1 HAND TRUCK 2 HAND TRUCK
CLT Auctions South Jersey Machine Shop Ended Aug 16, 2012 11:56am CDT Beverly New Jersey 08010 United States Lot Description 1 HAND TRUCK 2 HAND TRUCK 3 SLINGS CHAINS AND ACCESSORIES 4 STOCK AND RACK 5
More informationLaudiston Valuers & Auctioneer SALE: 752S DATE: 28 March 2012 at 10:00AM SM GENERAL ENGINEERING 5 CARIO STREET BULIMBA QLD
SM GENERAL ENGINEERING 5 CARIO STREET BULIMBA QLD _ 2 QUANTITY OF MEASURING INSIDE & OUTSIDE CALIPERS 3 VERNIER CALIPER - SME 4 DIAL CALIPER - NSK 5 VERNIER CALIPER 6 VERNIER CALIPER 7 OUTSIDE MICROMETER
More informationOnline Auction Of Machinery And Equipment From Hale Engineering Available Due To Closure.
Hale Engineering (Ends: 2018-02-07 14:00:00.0) Online Auction Of Machinery And Equipment From Hale Engineering Available Due To Closure. Lot 1 Nakamura Tome WT-250 CNC Turning Centre Nakamura Tome WT-250
More informationAuction Catalog. Auction Date:
Auction Catalog Ason Metal Prducts Auction Date: Thursday, April6, 2017 Bidding Starts: 11:004 AM CST KD Auctions 7918 E.McClain Dr. Suite 101 Scottsdale, AZ 85260 Phone: (480) 455-3910 Email: service@kdauctions.
More information2018 Facilities List
08 Facilities List 0 DOOSAN LYNX 00 0" CHUCK CNC TURNING CNC LATHE CENTER HIGH SPEED VERTICAL MILLING 00 MATSUURA RA IIG CENTER WITH PALLET CNC MILL CHANGER HIGH SPEED VERTICAL MILLING 999 DAEWOO DMV-400
More informationACCREDITATION FACILITY AUDIT CHECKLIST
ACCREDITATION FACILITY AUDIT CHECKLIST Institution Name: Date: Designated Trade: Machinist AC #: Contact: Location: Course Duration: of weeks: of hours total: of hours per day: Instructor(s) of Students
More informationALL IS SOLD "AS-IS,WHERE-IS"-NO WARRANTIES EXPRESSED/IMPLIED
Page 1 This catalogue is meant merely as a guide. The auctioneer does not warrant the genuineness, accuracy or count of any items described herein. 1 LOT: Victor Welding & Cutting Set, with Accessories
More informationTUESDAY, OCTOBER 27, 2015 *** 1:00 P.M. ***
TUESDAY, OCTOBER 27, 2015 *** 1:00 P.M. *** WELCOME TO THE AUCTION SALE OF JP JIG BORING INC. 133 REGINA ROAD VAUGHAN, ONTARIO, CANADA, L4L 8L9 TERMS & CONDITIONS FINAL PAYMENT IN FULL IMMEDIATELY AFTER
More informationTUESDAY, APRIL 28, 2015 *** 10:30 A.M. EDT *** WELCOME TO THE AUCTION SALE OF
TUESDAY, APRIL 28, 2015 *** 10:30 A.M. EDT *** WELCOME TO THE AUCTION SALE OF Surplus to the Ongoing Needs of DEC INDUSTRIES INC. 2240-43rd AVENUE LACHINE, QC, H8T 2J8 TERMS & CONDITIONS FINAL PAYMENT
More information(8th Nov 2018) MJS Engineering Services
(8th Nov 2018) MJS Engineering Services 1st Machinery Auctions are offering a complete plant clearance on behalf of MJS Engineering Services due to retirement. Online Auction Date: Thursday 8th November
More informationStone Auctioneers & Appraisers 61 Lakeview Lane Carrollton, AL Phone: Fax:
6 Lakeview Lane Carrollton, AL 7 Phone: 0-7-0 Fax: 77-60-7 M&H Tool & Die /7/07 Magnum Hole Shooter Drill, /" DeWalt Angle Grinder, Mdl D0 DeWalt Angle Grinder, Mdl DW0 Black & Decker Angle Grinder Black
More informationMachinery & Engineering Equipment
Wheeler & Clinch, Sale 1, Tool Room Machinery & Engineering Equipment (Ends: 2018-07-18 14:00:00.0) Wheeler & Clinch, Plastic Injection Moulding Facility And Tool Room. Available Due To Closure. Lot 1
More informationOnline Auction Of The Contents Of Jarvis Engineering Ltd Due To Closure.
Jarvis Engineering Ltd (Ends: 2016-06-08 14:00:00.0) Online Auction Of The Contents Of Jarvis Engineering Ltd Due To Closure. Buyers Premium 15% VAT 20% Location High Wycombe Lot 1 AYCE Horizontal Borer
More informationBIDITUP AUCTIONS & APPRAISALS VENTURA BLVD., SECOND FLOOR STUDIO CITY,CA (818) FAX (818)
This catalog is meant merely as a guide. The Auctioneers do not warrant the accuracy, genuineness, authenticity, description, weight, count or measure of any of the lots specified herein. Lot Heading Qty.
More informationFACILITIES LIST 2014
95D MAINLINE DRIVE P.O. BOX 428 WESTFIELD, MA 01086 PHONE 413-562-0052 FAX 413-568-7902 info@preciseturning.com www.preciseturning.com FACILITIES LIST 2014 TURNING: MILLING: KIA SKT 21B CNC TURNING CENTER
More informationMACHINE SHOP EQUIPMENT AND TOOLS FOR SALE. Todd S. Gupton Phone: (832) OPEN SHOP
MACHINE SHOP EQUIPMENT AND TOOLS FOR SALE Todd S. Gupton Email: tsgupton@gmail.com Phone: (832) 260-8308 OPEN SHOP SATURDAY - MARCH 25, 2017 9:00 AM TO NOON 1100 DEATS ROAD DICKINSON, TX 77539 White brick
More informationTIMTOS 2017 EXHIBITS PROFILE
TIMTOS 2017 EXHIBITS PROFILE Product Code Product Name METAL CUTTING MACHINE TOOL Lathes and Turning Machines 160101 Lathes, Swiss Type 160502 Bench Lathes 160503 High Speed Lathes 160504 Automatic Lathes
More informationAuction Catalog. Auction Date:
Auction Catalog CNC Turning and Screw Machinery Shop Closing, (Online), Location: Gilbert, AZ Auction Date: Tuesday, February 20, 2018 Bidding Starts: 10:00 AM (Arizona Time) KD Auctions 7918 E.McClain
More informationONLINE PUBLIC AUCTION
ONLINE PUBLIC AUCTION By Order of the Owner DIMENSION MACHINE ENGINEERING LLC 24750 21-Mile Road Macomb, Michigan 48042 AUCTION BEGINS: Monday, July 28 th AUCTION ENDS: Thursday, July 31 st, at 10:00 A.M.
More informationPlant Closed EXCEL TOOL, INC. 162 Tabor Ave Falls Mills, Virginia Northwest of Bluefield, West Virginia
Complete CNC and Conventional Machine Shop Including CNC Flat Bed Lathes, CNC VMC, CNC Turning Center, Boring Mills, Conventional Toolroom Machinery, Tooling and Shop Equipment Plant Closed EXCEL TOOL,
More informationHorizontal Machining Centers. Vertical Machining Centers
Kitamura MyCenter HX300iF Horizontal Control> 16i-MB X-axis Travel> 20 inches Z-axis Travel> 19 inches Rapid Traverse> 1969 ipm Max Spindle Speed> 20,000 rpm Big Plus Spindle Tool Capacity> 40 Full 4th
More information1 Nakamura Tome TMC 4 CNC Lathe. Ref Nakamura Tome TMC 4 CNC Lathe; Fanuc 6T Control, 250mm 3 jaw Chuck; 12 Tool Turret; Tailstock
Machinery and Equipment - June 2018 (Ends: 2018-06-20 14:00:00.0) On Line Collective Auction of Machinery and Equipment Lot 1 Nakamura Tome TMC 4 CNC Lathe. Ref. 5605 Nakamura Tome TMC 4 CNC Lathe; Fanuc
More informationRoyal Corporation, Chennai
+91-8071676709 Royal Corporation, Chennai https://www.indiamart.com/royalcorporation/ We are the trader of measuring instruments, cutting tools, lifting tools and magnetic tools. All our products find
More informationJOB QUALIFICATION STANDARD (JQS)
Occupation: Work Process: Maintenance Mechanic Machine Shop Practical Hours: 250 hrs. JOB QUALIFICATION STANDARD (JQS) DOL Standard: Manual Machining Fundamentals: Apply a working knowledge of metal removal
More informationEquipment. Online Auction of Engineering Machinery and Equipment BUYERS PREMIUM 15% VAT 20% Location Oldbury, West Midlands. Lot no.
Engineering Machinery and Equipment (Ends: 2016-04-21 14:00:00.0) Online Auction of Engineering Machinery and Equipment BUYERS PREMIUM 15% VAT 20% Location Oldbury, West Midlands Lot 1 Daewoo Puma model
More informationTridecs. C O R P O R A T I O N Prototype & Production Machining. MANUFACTURING EQUIPMENT SCHEDULE Version 12.4
Tridecs C O R P O R A T I O N Prototype & Production Machining MANUFACTURING EQUIPMENT SCHEDULE Version 12.4 Frank Schenkhuizen, Jr. President & Chief Executive Officer Rick Alexander Operations Manager
More informationMachine Tool Technology/Machinist CIP Task Grid
1 Secondary Task List 100 ORIENTATION / SAFETY 101 Describe the Occupational Safety and Health Administration (OSHA) and its role in the machoning industry. 102 Identify & explain safety equipment and
More informationPRECISION CABINET WORKS AUCTION Tuesday July 10 at 10:30 am LIVE and Lots 1-15 Simulcast via Proxibid
1 1 HITACHI 15" MITER SAW H-440041 2 1 OMGA RN 450 RADIAL ARM SAW "NEW MOTOR" 3 1 POWERMATIC MODEL 68 TABLE SAW SR# 84688183 4 1 RITTER LINE BORING MACHINE MODEL R-123 SR#269 3/3/94 5 1 BLUM MINI PRESS
More informationFurrow Auction Company
Furrow Auction Company Absolute Auction Hodges Machine Shop and Tool Repair Total Liquidation of 50 year old Hodges Machine Shop and Tool Repair Company specializing in Hydraulic Cylinder Repair 145 Riverview
More informationMachine Tool Technology/Machinist CIP Task Grid Secondary Competency Task List
1 100 ORIENTATION / SAFETY 101 Describe the Occupational Safety and Health Administration (OSHA) and its role in the machining industry. 2 2 2 1 0.5 102 Identify & explain safety equipment and procedures.
More informationSTATE UNIVERSITY OF NEW YORK SCHOOL OF TECHNOLOGY CANTON, NEW YORK
STATE UNIVERSITY OF NEW YORK SCHOOL OF TECHNOLOGY CANTON, NEW YORK COURSE OUTLINE MECH 121 - MANUFACTURING PROCESSES I Prepared By: Daniel Miller Updated By: Daniel Miller (April 2015) CANINO SCHOOL OF
More informationAuction Catalog. Auction Date:
Auction Catalog Reliable System Solutions Inc Auction Date: Tuesday, Feb. 11, 2014 Bidding Starts: 9:00 AM (PST) KD Auctions 7918 E.McClain Dr. Suite 101 Scottsdale, AZ 85260 Phone: (480) 455-3910 Email:
More informationALLENAIR FLUID POWER DAY 1 BIDDING ENDS AUGUST 8 TH AT 10AM EDT
1 ENERPAC PORTA POWER WITH (3) SMALL JACKS 2 HEATHKIT MODEL C1-1080 EXHAUST GAS ANALYZER 3 HEATHKIT MODEL CM-11551 DIGITAL ENGINE ANALYZER 4 EDELMANN 97 VACUUM SYSTEM ANALYZER 5 SEARS CRAFTSMAN TIMING
More informationLots Catalogue Edition 1 2/6/15
Lots Catalogue Edition 1 2/6/15 QA Precision Engineering OPEN DAY: Wednesday 17th June 10am - 4pm QA Precision Engineering 3, Holton Health Trading Park, Holton Road, Poole, Dorset BG16 6LG 1 Hyundai Hit
More informationEVOLUTIONS TOOL & DIE Tool & Die Shop - Complete Liquidation
Thompson Auctioneers EVOLUTIONS TOOL & DIE Tool & Die Shop - Complete Liquidation VIPER Model VMC-1230 AG Vertical Machining Ctr, Lagunmatic CNC Vertical Knee Mill, Kent Model SGS618M Hand Feed Surface
More informationRevised April Unit/Standard Number. High School Graduation Years 2016, 2017 and 2018
Unit/Standard Number High School Graduation Years 2016, 2017 and 2018 Machine Tool Technology/Machinist CIP 48.0501 Task Grid Secondary Competency Task List 100 ORIENTATION / SAFETY 101 Describe the Occupational
More informationBidding Closes: October 21-22, from 12PM EST. Complete Plant Closure - Over 2000 Lots! Location: 8625 Monticello Ln N., Maple Grove, MN 55369
2-day ONLine AUCTION Complete Plant Closure - Over 2000 Lots! Manufacturer of High-Quality Complex Precision Aerospace Components & Assemblies BERARDI ALTS130C 5-Axis Machining Center BOURN & KOCH / WILSON
More informationWORKSHOP EQUIPMENT. TIGER 2000S Ø200 x 40mm K 220 grinder stone 120W / 240V motor. Order Code: W859 $220 RRP JIG 60. Order Code: W8642 $38 50 RRP
WORKSHOP EQUIPMENT NOV-DEC 2018 JAN 2019 INDUSTRIAL BENCH GRINDER WITH LINISHER & MITRE TABLE X8-PLUS 200mm medium grade wheel 750W / 1hp 240V motor Disc Mitre Table with Guide WETSTONE GRINDER TIGER 2000S
More informationOur Facilities 5 AXIS MACHINING SOLUTIONS CNC TURNING
Our Facilities 5 AXIS MACHINING SOLUTIONS INTEGREX 300-IV 2010 5 AXIS MACHINE EQUIPED WITH 10 CHUCK AND 15 CHUCK. 60 BETWEEN CENTERS. 40 TOOL MAGAZINE. TURNING CAPACITY 16 DIAMETER. 15 H.P. MILL SPINDLE.
More informationOnline Auction Of The Contents Of Dean Engineering, Available Due To Closure.
Dean Engineering Ltd (Ends: 2018-06-27 14:00:00.0) Online Auction Of The Contents Of Dean Engineering, Available Due To Closure. Lot 1 Yang SMV1000 VMC Yang SMV1000 VMC, year 2000, Renishaw Probe, Vice,
More informationThompson Auctioneers UNMATCHED CONDITION METAL AND WOODWORKING ITEMS HOME SHOP: MODEL BUILDER & PRECISION MACHINIST. Ended Sep 17, :42pm EDT
Thompson Auctioneers UNMATCHED CONDITION METAL AND WOODWORKING ITEMS HOME SHOP: MODEL BUILDER & PRECISION MACHINIST 986 Riverview Ct Xenia Ohio 45385 United States Ended Sep 17, 2015 8:42pm EDT Lot Description
More informationB.E Mini Projects
B.E Mini Projects 2017-2018 S.NO CMP001 CMP002 CMP003 CMP004 CMP005 CMP006 CMP007 CMP008 CMP009 CMP010 CMP011 CMP012 CMP013 CMP014 CMP015 CMP016 CMP017 CMP018 CMP019 CMP020 CMP021 CMP022 CMP023 CMP024
More informationMachine Tool Technology/Machinist CIP Task Grid
1 100 ORIENTATION / SAFETY 101 Describe the Occupational Safety and Health Administration (OSHA) and its role in the machining industry. 102 Identify & explain safety equipment and procedures. 103 Identify
More informationJ & J Tool & Die Retirement Auction - Well maintained C N C and manual machinery, tooling, and shop support items.
Jeff Bub Auctioneer J & J Tool & Die Retirement Auction - Well maintained C N C and manual machinery, tooling, and shop support items. CNC lathes, Haas, CNC mills, Manual lathes, Grinders, Okamoto, Cincinnati,
More informationComplete Sellout of Bay Area Metal Fabricator
Complete Sellout of Bay Area Metal Fabricator Auction Opens: Tue, Mar 5 10:00am Auction Closes: Thu, Mar 7 11:00am 0100 Verson 90 Ton Electric Steel Press Brake 0100A (400+) Press Brake Dies on Steel Rack
More informationSalvadore Auctions & Appraisals, Inc.
Salvadore Auctions & Appraisals, Inc. OBI Power Presses, Spring Winders, Tool-room Equipment, 4 Slide Machines, Re purposing Items of (2) Metal Stamping Firms Sale of Metal Stamping firm forces liquidation
More informationBIDITUP! An Industrial Assets Co VENTURA BLVD., SECOND FLOOR STUDIO CITY,CA (818) FAX (818)
This catalog is meant merely as a guide. The Auctioneers do not warrant the accuracy, genuineness, authenticity, description, weight, count or measure of any of the lots specified herein. Lot Heading Qty.
More informationAuction Catalog. Lots Start Closing:
Auction Catalog Surplus Assets of a Major Southern California Precision Manufacturer of Aerospace/ Medical Components Lots Start Closing: Tuesday, June 19, 2018 10:00 AM (PDT) Bidding: OPEN NOW KD Auctions
More informationM. R. JUTZI AUCTIONS. Woodworking & Fabricating Equipment AUCTION. Wednesday, May 26, 10:00 a.m.
M. R. JUTZI AUCTIONS Woodworking & Fabricating Equipment AUCTION Being Held at: 777 LAWRENCE ST, CAMBRIDGE, ON Wednesday, May 26, 2010 @ 10:00 a.m. Auction Catalog Lot# Quantity Description 2 1 VISE 3
More informationPRAZIO INC. 150 ARMSTRONG AVENUE, GEORGETOWN, ONTARIO, CANADA, L7G 5G8
TUESDAY, MAY 16, 2017 *** 10:30 A.M. EDT *** WELCOME TO THE AUCTION SALE OF PRAZIO INC. 150 ARMSTRONG AVENUE, GEORGETOWN, ONTARIO, CANADA, L7G 5G8 TERMS & CONDITIONS FINAL PAYMENT IN FULL IMMEDIATELY AFTER
More informationPerkins Statewide Articulation Agreement. Documentation item: Secondary Competency Task List Coversheet
Perkins Statewide Articulation Agreement Documentation item: Secondary Task List Coversheet The Secondary School agrees to: A. Implement the approved PDE Program(s) of Study. B. Provide assessment of student
More informationLOT QTY DESCRIPTION NOTE (APPROX) x BLACK & GALV SHEET STEEL, 1 x BAY, UP TO 1800 x 1200mm, VARIOUS GAUGES, APPROX mm
1 PIGEON HOLE STORAGE RACK, 240 x 180cm, 58 x NESTS, WALL MOUNT 2 3 & SINGLE PHASE CIRCUIT BREAKERS, 2-100AMP 3 FABRICATED HAND PRESS, SUIT BENCH TOP MOUNT 4 QUANTITY NYLON INSULATION, 30-100mm DIAMETER
More informationBand Saw Operation & Safety
Band Saw Operation & Safety 2. Three teeth for thickness of material is a good rule to follow when cutting material. Any less and the band saw teeth can be broken off. 3. Read chart on front of band saw
More information1 1 John Deere DI55 48" Cut, 54 hrs 2 1 John Deere L MASTERHAND ROLLCAB TOOL CHEST 4 1 NORTHSTAR PRESSURE WASHER 5 1 AIRTANK 6 1 LP TANK 7 1
1 1 John Deere DI55 48" Cut, 54 hrs 2 1 John Deere L100 3 1 MASTERHAND ROLLCAB TOOL CHEST 4 1 NORTHSTAR PRESSURE WASHER 5 1 AIRTANK 6 1 LP TANK 7 1 STANDS 8 1 HYDRAULIC JACK 9 1 TROLLEY HYDRAULIC JACK
More informationLOT QTY DESCRIPTION NOTE 2 CONTENTS WORKSHOP OFFICE INCLUDING FITTINGS, PICTURES, HORNBY RACE CAR SET, ETC
1 CONTENTS LOFT OFFICE INCLUDING P.C, DESKS, CHAIRS, ETC 2 CONTENTS WORKSHOP OFFICE INCLUDING FITTINGS, PICTURES, HORNBY RACE CAR SET, ETC 3 TURNED TIMBER BALUSTRADE, METAL BALUSTRADE & TIMBER STOCKS 4
More informationJOB QUALIFICATION STANDARD (JQS)
Occupation: Work Process: MACHINIST (CNC) CNC Setup Practical Hours: 2000 hrs. DOL Standard: CNC Setup: Apply a working knowledge in the setup of Computer Numerical Controls (CNC) machines that execute
More informationTU-3008G-20M - Opti-Turn Lathe & Mill Drill Combination Package Deal 300 x 700mm Included BF-20AV Mill Head
TU-3008G-20M - Opti-Turn Lathe & Mill Drill Combination Package Deal 300 x 700mm Included BF-20AV Mill Head Package Deal Ex GST Inc GST $3,850.00 $4,235.00 Package Contents - SAVE $209.00 (Inc) 1 x L691
More informationPIPER PRECISION, INC ROCKLEY ROAD, HOUSTON, TEXAS, USA, 77099
WEDNESDAY, MAY 31, 2017 *** 10:30 A.M. CDT *** WELCOME TO THE AUCTION SALE OF PIPER PRECISION, INC. 10622 ROCKLEY ROAD, HOUSTON, TEXAS, USA, 77099 TERMS & CONDITIONS THIS SALE WILL BE CONDUCTED IN US FUNDS
More informationTHURSDAY, AUGUST 24, 2017 *** 10:30 AM EDT *** WELCOME TO THE AUCTION SALE OF TERMS & CONDITIONS
THURSDAY, AUGUST 24, 2017 *** 10:30 AM EDT *** WELCOME TO THE AUCTION SALE OF SURPLUS ASSETS OF MULTI-MACHINING LTD. 590 SEAMAN STREET, STONEY CREEK, ON, L8E 4H1 TERMS & CONDITIONS FINAL PAYMENT IN FULL
More informationONLINE AUCTION Assets Surplus to the Ongoing Requirements of
ONLINE AUCTION Assets Surplus to the Ongoing Requirements of MANUFACTURER OF HIGH-PRECISION UTILITY SYSTEMS & DIGITAL IMAGING FOR THE DENTAL INDUSTRY Featuring: STAR CNC Swiss-Type Automatic Lathes, OKUMA
More informationTool and Die Maker Level 2
Level 2 B2 Read and Interpret Drawings II Duration: 32 hours 32 hours 0 hours This unit of instruction introduces the Tool and Die Maker Apprentice with the knowledge and skills necessary to read and interpret
More informationStone Auctioneers & Appraisers
Stone Auctioneers & Appraisers ONLINE ONLY AUCTION! Machine Shop Closed by Order of Secured Lender! **Lots 134-137 are consigned & located in Columbus, Mississippi! Everything must be sold and building
More informationDuckwall & Company, Inc
Duckwall & Company, Inc Marcy Machine Started Nov 28, 2018 10am CST (4pm GMT) 700 Duck Rd., Grandview Missouri 64030 United States Lot Description 1 HENRY TROEMNER BALANCE SCALE, 20 KG CAP. 2 ELECTRIC
More informationMaynards Industries (1991) Inc.
Maynards Industries (1991) Inc. Alpha Tool & Automation Webcast-Online Only Auction of Alpha Tool & Automation, Inc 2089 Heide Drive Troy Michigan 48084 United States Apr 20, 2016 11am EDT (8am PDT) Lot
More informationK SCREW PRODUCTS, INC.
PUBLIC AUCTION Manufacturer of Screw Machine Products K SCREW PRODUCTS, INC. Plant Closed: 22519 W. Grant Highway Marengo, Illinois 60152 SALE DATE: Tuesday, October 21, 2014 10:00 am CDT INSPECTION: Monday,
More informationPennsylvania College of Technology One College Ave. Williamsport, PA Student ID Number:
Pennsylvania College of Technology One College Ave. Williamsport, PA. 17701-5799 Name: School: Student ID Number: Date: COMPETENCY ASSESSMENT FOR MACHINIST GENERAL (MG) MACHINE TOOL TECHNOLOGY (MY) AUTOMATED
More informationStone Auctioneers & Appraisers 61 Lakeview Lane Carrollton, AL Phone: Fax:
6 Lakeview Lane Carrollton, AL Phone: 0--0 Fax: -60-88 C-Max- Online Only Auction /0/08 6 8 9 0 6 8 9 0 6 8 9 0 Craftsman Utility Sharpener & Dual Rate Battery Charger DeWalt Hammer Drill & Chicago Hand
More information+91-8048762195 Berlin Machine Corporation http://www.berlinmachines.com/ Manufacturer, Exporter, Wholesaler, and Trader of a wide range of precision engineered Industrial Machines and Accessories such
More informationThank you for attending another BIDITUP auction -biditup.com
Page 1 Printed:02/01/2013 15:31 This catalog is meant merely as a guide. The Auctioneers do not warrant the accuracy, genuineness, authenticity, description, weight, count or measure of any of the lots
More informationThank you for attending another BIDITUP auction -biditup.com
Page 1 This catalog is meant merely as a guide. The Auctioneers do not warrant the accuracy, genuineness, authenticity, description, weight, count or measure of any of the lots specified herein. 1 1 MILWAUKEE
More informationIPC Group TOOL & DIE MAKER
IPC Group TOOL & DIE MAKER WELCOME TO OUR AUCTION! Wednesday June 29 th, 2016 11:00 AM 50 Corstate Avenue, Concord, Ontario Precision Plastics July 6 th Edmonton, AB Belden Wire July 8 th On-Line Only
More informationBID ONSITE OR BID ONLINE ON THE PREMISES OF: 97,000 SQ FT OF ITEMS TO BE SOLD!
WORLD FAMOUS BLACKSMITH AND ON THE PREMISES OF: Murray s Iron Works AUCTION: TUESDAY, MARCH 13 AT 11:00 AM PDT INSPECTION: MONDAY, MARCH 12 FROM 9:00 AM PDT TO 3:00 PM PDT AND MORNING OF SALE FROM 8:00
More informationFowler 12" Height Gage Fowler 12" Height Gage Magnetic Bases one Fowler with Case and Flex Arm Surface Plate 18" X 24" X 3
Speedsource Racing Ring 2 4150 NW 120 th Avenue, Coral Springs, FL Tuesday, December 19, 2017 Beginning at 10:00 AM KeyAuctioneers.com (317) 353-1100 / info@keyauctioneers.com Lot Quantity Title Description
More informationPOS Perkins Statewide Articulation Agreement Documentation Coversheet
POS Perkins Statewide Articulation Agreement Documentation Coversheet Student Name: Secondary School Name: Secondary School Address: CTE Program of Study: CIP # CIP Program Name Grade 9 1. CAREER AND TECHNICAL
More informationCOLLEGE OF ENGINEERING MACHINE SHOP FACILITIES AND PRACTICES Prepared by Mike Allen July 31, 2003 Edited by Scott Morton February 18, 2004
1 COLLEGE OF ENGINEERING MACHINE SHOP FACILITIES AND PRACTICES Prepared by Mike Allen July 31, 2003 Edited by Scott Morton February 18, 2004 I. OBJECTIVE To provide an overview and basic knowledge of the
More informationBIDITUP AUCTIONS & APPRAISALS VENTURA BLVD., SECOND FLOOR STUDIO CITY, CA (818) FAX (818)
This catalog is meant merely as a guide. The Auctioneers do not warrant the accuracy, genuineness, authenticity, description, weight, count or measure of any of the lots specified herein. Lot Qty. Description
More informationPrecision made in Germany. As per DIN The heart of a system, versatile and expandable.
1 Precision made in Germany. As per DIN 8606. The heart of a system, versatile and expandable. Main switch with auto-start protection and emergency off. Precision lathe chuck as per DIN 6386 (Ø 100mm).
More informationLATE MODEL MACHINE SHOP & TOOLROOM
LIVE ONSITE & WEBCAST AUCTION Plant Closure of: VENTURE PRECISION TECHNOLOGY AUCTION Thursday, December 3rd at 11:00am (CST) ASSET LOCATION 1881 Treble Drive Humble, TX 77338 INSPECTION Wednesday, December
More informationLot Number Lot Title Lot Description
Lot Number Lot Title Lot Description 1 HAAS ST-30 CNC Lathe, S/N. 3095679, (2013) 2 HAAS ST-30 Big Bore CNC Lathe, S/N. 3095682, (2013) 3 HAAS ST-30 CNC Lathe, S/N. 3089447, (2011) 4 HAAS ST-30 CNC Lathe,
More informationBMG METALS PRODUCT & SERVICE GUIDE TOTAL METALS SINCE 1963
BMG METALS PRODUCT & SERVICE GUIDE BMG is proud to have been serving the mid-atlantic region for over 50 years by supplying carbon steel, stainless steel, aluminum, as well as rebar fabrication, plasma
More informationBS-5V SWIVEL HEAD METAL CUTTING BAND SAW
2018 May - July BS-5V SWIVEL HEAD METAL CUTTING BAND SAW BS-4A METAL CUTTING BAND SAW BS-5S SWIVEL HEAD METAL CUTTING BAND SAW 150 x 100mm capacity 3 blade speeds Mitre vice 45º 1/2hp, 240V motor Compact
More informationONLINE AUCTION 2 AVAILABLE
ONLINE AUCTION 2 AVAILABLE 2007 Surplus Assets of 38 TON AMADA 3512E CNC PRESS BRAKE 88 TON AMADA FBD8020NT CNC PRESS BRAKE AMADA FABRICATION, STAMPING & TOOL ROOM FACILITY CLOSURE INCLUDING: TURRET PUNCHES,
More informationAuction Catalog. Lot# Quantity Description 1 1 BOX OF TOOLS 2 1 ELECTRIC STAPLER 3 1 BOOSTER CABLES 4 1 WRENCH & ADJUSTABLE WRENCHES
Auction Catalog M. R. JUTZI AUCTIONS Construction, Auto, Shop & Woodworking Equipment Sale Saturday, November 21, 2015 @ 9:30 am On-Site @ 5100 Fountain St N, Breslau, ON N0B 1M0 Lot# Quantity Description
More informationTURNING BORING TURNING:
TURNING BORING TURNING: FACING: Machining external cylindrical and conical surfaces. Work spins and the single cutting tool does the cutting. Done in Lathe. Single point tool, longitudinal feed. Single
More informationThompson Auctioneers THERMOFORM PRODUCTS, LLC
Thompson Auctioneers THERMOFORM PRODUCTS, LLC (2) MotionMaster CNC Routers,(2) Brown Models 222, 223 Thermoformers,Comet 4 Station Thermoformer, Die Cutters, Air Compressors, Plastic Shear, Wel Ended Sep
More informationSAULT COLLEGE OF APPLIED ARTS AND TECHNOLOGY SAULT STE. MARIE, ONTARIO COURSE OUTLINE
SAULT COLLEGE OF APPLIED ARTS AND TECHNOLOGY SAULT STE. MARIE, ONTARIO Sault College COURSE OUTLINE COURSE TITLE: CODE NO. : SEMESTER: 2 PROGRAM: AVIATION MACHINING AUTHOR: ROBERT ZUCCATO TIM CANDIDO Bob.zuccato@saultc.on.ca
More informationTravis Bishop. Submitted to: Dr. John Davis. Date: 3 December Course: ETME 310 Section: 004. Lab Topic: Milling Project (Vise)
Travis Bishop Submitted to: Dr. John Davis Date: 3 December 2012 Course: ETME 310 Section: 004 Lab Topic: Milling Project (Vise) Introduction: Purpose of Experiment: This experiment was conducted to teach
More information