Fowler 12" Height Gage Fowler 12" Height Gage Magnetic Bases one Fowler with Case and Flex Arm Surface Plate 18" X 24" X 3
|
|
- Lydia Jennings
- 6 years ago
- Views:
Transcription
1 Speedsource Racing Ring NW 120 th Avenue, Coral Springs, FL Tuesday, December 19, 2017 Beginning at 10:00 AM KeyAuctioneers.com (317) / info@keyauctioneers.com Lot Quantity Title Description Litening Low Profile Floor Jack Litening Low Profile Floor Jack Daytona Body Repair Jack 4 Ton Slide Hammer Puller Set Slide Hammer Puller Set Slide Hammer Puller Set Slide Hammer Puller Set Valve Spring Compressor Valve Spring Compressor Cylinder Leakage Tester Cylinder Leakage Tester PBT Ratchet Pump Model PBT Ratchet Pump Model Shop Table 30" X 72" Central Hydraulics Hydraulic Wheel Dollies Model Robinair Recovery Unit Model 34988, SN Coats Tire Changer Model 40-40SA Hunter Engineering Co Tire Changer Model TC a 1 8 Containers of Ru-Glyde Lubricant Tire Mounting & Rubber Lubricant 1012b 1 Wheel Balancer Wheel Balancer Hunter Engineering Co Wheel Balancer Model DSP7700 SN CP9646, Single Phase Coats Wheel Balancer Model 600, SN , Single Phase Hardware Bin with Wheel Weights Hardware Bin with Wheel Weights 1015a 1 Tire Cleaner Tire Cleaner Sunex Engine Stand with Crank Model 8300GA, 1000Lb Capacity Sunex Engine Stand with Crank Model 8300GA, 1000Lb Capacity Sunex Engine Stand with Crank Model 8300GA, 1000Lb Capacity Performance Tool Engine Stand Model W41031, SN TR , 1250Lb Capacity Engine Stand Capacity Unknown Performance Tool Engine Stand with Crank Model W41025, 1000Lb Capacity Kanon 8" Height Gage Kanon 8" Height Gage
2 Fowler 12" Height Gage Fowler 12" Height Gage Magnetic Bases one Fowler with Case and Flex Arm Surface Plate 18" X 24" X 3 1/4" Starrett 12" Digital Depth Gage Part No Starrett 12" Digital Depth Gage Part No Starrett 12" Digital Depth Gage Part No Starrett 12" Digital Depth Gage Part No Dor1An Tool Pre-Setter Model DP368LR-Z300, SN Y13/DT5130/P2, Year Fowler 12" Caliper Fowler 12" Caliper Fowler 1" Depth Gage Fowler 1" Depth Gage Fowler Digital Depth Gage Fowler Digital Depth Gage Mitutoyo Depth Gage Part No 2902S Mitutoyo Digital Protractor Model Pro Mitutoyo Digital Protractor Model Pro Lot of Dial Gages and Indicator Holders Lot of Dial Gages and Indicator Holders Lot of Calipers, Shins and Thread Measuring Wires Lot of Calipers, Shins and Thread Measuring Wires Mitutoyo.7-1.4" Gage Code No , SN SPI Pin Gage Set " SPI Pin Gage Set " Vee Gee Refractometer SN Vise Must Remove From Table Shop Table on Casters 31" X 103", Vise Not Included Sunnen Precision Honing Machine Model Lbb-1699, SN 24035, Single Phase Lot of Honing Cylinder Tooling Lot of Honing Cylinder Tooling Sunnen Precision Gage Model AG-300, SN Lot of Sunnen Precision Honing Stones Lot of Sunnen Precision Honing Stones Shop Table 30" X 48" Dewalt 14" Cutoff Saw Model DW872, SN Makita 14" Cutoff Saw Model 2414B, SN Lista Tool Cabinet on Casters 22 1/2" X 40" X 48" Tool Box 18 1/2" Wide Tool Box 18 1/2" Wide Excel Tool Cabinet on Casters 18" X 41" X 42"
3 Grinder Model LF177, 8", 1/2 Hp Tool Cabinet on Casters 17 1/2" X 30" X 42" Tool Cabinet on Casters 18" X 41" X 40", Contents Included Sears Craftsman 15" Drill Press 1/2 Hp, 12 Speed, Single Phase Penn State Drill Press Model DP F/T, 5/8" Capacity, 5 Speed, SN , Single Phase Birmingham 52" Lathe Model CT-1440G, SN , 7" Swing, Single Phase " Chuck 8" Chuck Turn-Pro 7" Metal Cutting Bandsaw Partial Model 3190, SN , Single Phase Bridgeport Vertical Mill with Acu-Rite Digital Readout Traverse, SN , 2 Hp, 3 Phase, 9" X 42" Table Porter Cable 6" Pedastool Grinder Model PCB525BG, SN " Shop Fan 18" Shop Fan Bridgeport Vertical Mill with Mitutoyo Digital Readout SN , 3 Phase, 9" X 42" Table Chick CNC Vise with Table 6" Jaw, 19 1/2" X 24" Table Dandy Hydraulic Lift Cart 550Lb Capacity, 20" X 31" Kurt 6" Machinist Vise with Base Kurt 6" Machinist Vise with Base Kurt 6" Machinist Vise with Base Kurt 6" Machinist Vise with Base Kurt 6" Machinist Vise Kurt 6" Machinist Vise Dandy Hydraulic Lift Cart 1100Lb Capacity, 24" X 36" " Machinist Vise 6" Machinist Vise Bridgeport 15" Rotary Table SN Hydraulic Lift Cart Unknown Capacity, 18" X 28" Columbian 4" Vise Columbian 4" Vise Small Vise 3 Small Vise " Chuck 8" Chuck Parallel Set 1/4" Parallel Set Parallel Set Adjustable Parallel Set Adjustable Parallel Set " Micrometer Set 1-3" Micrometer Set SPI 1" Micrometer SPI 1" Micrometer Brown & Sharpe Thread Micrometer Brown & Sharpe Thread Micrometer Two 1" Micrometers Two 1" Micrometers Two Micrometers, 2 and 3" Two Micrometers, 2 and 3" Two Telescoping Gage Sets Two Telescoping Gage Sets
4 Punch Set, Protractors, Assorted Tooling Punch Set, Protractors, Assorted Tooling Right Angle Block 6" X 8" X 10" V Blocks and Tooling Holders V Blocks and Tooling Holders Hydraulic Life Cart Does Not Work, 19 1/2" X 31" Shop Table 30" X 72" Lot of Chucks Lot of Chucks Lot of End Mills Lot of End Mills Lot of End Mills and Tooling Lot of End Mills and Tooling Lot of End Mills, Reamers and Undercuts Lot of End Mills, Reamers and Undercuts Lot of Countersinks, Corner Round and Tooling Lot of Countersinks, Corner Round and Tooling Lot of End Mills Lot of End Mills Lot of Tooling Lot of Tooling Live Centers 3 Live Centers Cat 40 Tool Holders Cat 40 Tool Holders Lot of Tool Holders and Cutters Lot of Tool Holders and Cutters Two Tool Holder Racks Two Tool Holder Racks Shop Table 30" X 72" Drill Index Drill Index Drill Index Drill Index Drill Index Drill Index Drill Index Drill Index Lot of Drill Shanks Lot of Drill Shanks Hardware Bin with Contents Hardware Bin with Contents Hardware Bin with Contents Hardware Bin with Contents Shop Table 30" X 72" Lot of Tie Downs Lot of Tie Downs Chicago Pneumatic Air Wrench with Sockets Model CP7775-6, SN 05093K Three 3/4" Drive Sockets 3 1/4", 3 1/2" and 3 13/16" Husky 1/2" Impact Wrench Model H4140, SN H Impact Wrench Impact Wrench Pneumatic Wrench Pneumatic Wrench Sanborn 3/8 Deuce Air Ratchet Sanborn 3/8 Deuce Air Ratchet Ingersoll Rand Air Shear Model 7812G
5 Husky Medium Stroke Air Hammer Model H Pneumatic Grinder Pneumatic Grinder Central Pneumatic High Speed Air Body Saw 1/4" NPT, 16 Gauge Max Ironton 1/4" Air Mini Die Grinder Model Snap on 3/4 Drive Torque Wrench 43", Pat No Shop Table 30" X 72" Lincoln Pneumatic Grease Gun Lincoln Pneumatic Grease Gun Pneumatic Tools Need Repair Milwaukee M18 Fuel Impact Wrench With Charger and Extra Battery Makita 18V Impact Wrench With Two Battery Chargers, Model BTW Makita 18V 1/2 Drill With Charger and Extra Battery Model BDF Bosch Laser Model GLL Craftsman 19.2V 1/2" Drill Driver With Charger Sears Craftsman Industrial 1/2" Impact Wrench SN Shop Table 30" X 48" Steinel Double Insulated Heat Gun Model HL 2010E, Item Milwaukee Variable Temperature Heat Gun SN 747A Lot of Hole Saws Lot of Hole Saws Lot of Drill Bits Lot of Drill Bits Drill Index Drill Index Tempco Hydraulic Crimping Tool Model TH Shop Table 30" X 48" Goodson Lathe 18 3/4" Chuck To Point Outside Diameter Hone Outside Diameter Hone Tool Cabinet on Casters 20" X 28" X 35", Contents Included Parts Cleaner 35" X 48" X 67" Lot of Gloves, Knee Pads and Protective Gear Lot of Gloves, Knee Pads and Protective Gear Spindle Nut Kit Spindle Nut Kit Imperial Tubing Kit Imperial Tubing Kit Marson Riveter Model Big Daddy II, Part No Filter Wrench Model Lot of Filter Wrenches and Snapon Bolt Tool Lot of Filter Wrenches and Snapon Bolt Tool Reed Pipe Vise Reed Pipe Vise
6 Transfer Punch Sets 2 Transfer Punch Sets Transfer Punch Sets 2 Transfer Punch Sets Vise Clamps 2 Vise Clamps Two Socket Sets Two Socket Sets Lot of Torches Lot of Torches Lot of Wrenches and Sockets Lot of Wrenches and Sockets Lot of Assorted Hand Tools Lot of Assorted Hand Tools Lot of Assorted Tooling Lot of Assorted Tooling Lot of Assorted Tooling and Tape Lot of Assorted Tooling and Tape Shop Table 37" X 145 1/2" Rolling Chairs 2 Rolling Chairs Waste Can and Stool Waste Can and Stool Small Furniture Dollies 4 Small Furniture Dollies Aerosol Spray Cans 4 Aerosol Spray Cans 1168a 1 Lot of Oil and Cleaners Lot of Oil and Cleaners Engravers 4 Engravers Liquid Meter Liquid Meter Jack Jack Lot of Assorted Metal and Rugs Lot of Assorted Metal and Rugs Shop Table with Back Shelves 32" X 144" Door Cabinet 2-Door Cabinet Lot of Straps, Caps and Hardware Lot of Straps, Caps and Hardware Lot of Hosing Lot of Hosing Door Cabinet No Contents Norco 20 Ton Shop Press Model 78023C H Frame Shop Press Frame H Frame Shop Press Frame Underhoist Stand with Pedal Model 6810, 3/4 Ton Underhoist Stand with Pedal Model 6810, 3/4 Ton Two 6 Ton Jack Stands Two 6 Ton Jack Stands Two Jack Stands Two Jack Stands Four Jack Stands Four Jack Stands Four Jack Stands Four Jack Stands Two 2 Ton Jack Stands Two 2 Ton Jack Stands
7 Floor Jack Floor Jack Diamond Plate Step Stools 2 Diamond Plate Step Stools Die Hard Battery Charger Does Not Work 1189a 1 55 Gallon Drum of Castrol CNC Oil Syntilo JLG Scissor Lift Model 1932E2, 1050Lb, 19', Capacity, SN , Year Dump Hopper Model H-150-MD, 4000Lb Capacity Boom Boom Ball Ball Ex-Cell Pressure Washer Model ESHP3540, 3500 Psi, 4 Gallon, 13 Hp Schumacher 12V Battery Charger Schumacher 12V Battery Charger Benwil Vehicle Lift Model FP Rotary Vehicle Frame Lift Rotary Vehicle Frame Lift Pexto Shear 52" Bed, 16 Gage Pexto Shear 42" Bed Rack with Assorted Wire Spools Rack with Assorted Wire Spools Cyclone Sand Blaster with Collection System Model 3824, SN Diamond Plate Sheet 4' X 8' X 48" Sheet Stock and Rolls Sheet Stock and Rolls Sheet Stock Sheet Stock Tube Metal Stock Tube Metal Stock Rack No Contents 50" X 81" X 80" Dyna-Glo Commercial Heater Model KFA80C, Electric or Gas Reddyheater Portable Heater Electric or Gas Readyheater 55 Portable Heater Electric or Gas Enco 50" Skip Roll Model , SN , 3" Roll Diameter, 1 1/2" Minimum Radius Adjustable Pipe Bender Adjustable Pipe Bender Proformer 48" Shear 16 Gage Capacity " Brake 16 Gauge Capacity Beader 24" Throat Throatless Shear Throatless Shear Stands 6 Stands Dake Cold Saws Miter Saw with Base Model 315-1PH Enco Vertical Bandsaw Model , SN RFAN10, Single Phase
8 Enco Vertical Bandsaw Model , SN VHAN27, Single Phase Delta 8" Grinder Delta 8" Grinder Bench Grinder 6" Bench Grinder Model Grinder Stand Grinder Stand Lot of Grinding Wheels Lot of Grinding Wheels Craftsman Shop Cart 16" X 30" Heavy Duty 20" Disc Grinder/Sander Model Arch Baileigh Industrial Drill Press Model DP-1512B, Single Phase Ryobi 10" Drill Press with Laser Model DP102L, Single Phase Tube and Pipe Notcher with Dewalt Drill Tube and Pipe Notcher with Dewalt Drill Dake Arbor Press No 1 1/2 Dake Arbor Press No 1 1/ Enco 12" Grinder Single Phase Tube Stock Tube Stock Tube Stock Tube Stock Assorted Metal Stock Assorted Metal Stock Stock Rack 60" X 148" X 143", No Contents Hyd Mech Bandsaw Model S20M Series III, SN 6C , 3 Phase, 3 Hp Shop Vac 16 Gallon, Hp Craftsman Wet Dry Vac 16 Gallon, 6 Hp Two Shop Vacs 6 Gallon, 3 Hp 1238a 1 4 Papertowel Holders 4 Papertowel Holders Surface Plate and Tie Downs 18" X 24" Right Angle Block 12" X 16" X 20" Two Right Angle Blocks 6" X 7" X 9" Jacks 4 Jacks Fuel Transfer Pump Fuel Transfer Pump Air Impact Gun Air Impact Gun Air Impact Gun Air Impact Gun Lot of Lifting Straps and Rope Lot of Lifting Straps and Rope Puller Set Puller Set 1247a 1 Goodridge Assembly Crimper with Hose Crimping Die Sets Model GR30-Head Double Flaring Tool Set Double Flaring Tool Set Jacks 4 Jacks
9 Patton 36" Pedastool Fan Patton 36" Pedastool Fan Lot of Assorted Fittings and Gages Lot of Assorted Fittings and Gages Lot of Assorted Filters and Parts Lot of Assorted Filters and Parts Miller Tig Welder with Powersouce Model Syncrowave 250 DX, SN LC661499, 200/230/460V Miller Millermatic 150 Arc Welder Miller Millermatic 150 Arc Welder Torch Carr with Torch and Gages Torch Carr with Torch and Gages Northern Industrial Welding Helmet Northern Industrial Welding Helmet Welding Helmet, Jacket and Welding Rod Welding Helmet, Jacket and Welding Rod Shop Table on Casters 27" X 34" Lot of Gages Lot of Gages Dayton Portable Spot Welder Model 2Z Volt Power Cord 600 Volt Power Cord Two Power Cords Two Power Cords Welders Angle Clamp Welders Angle Clamp Magnetic Blocks and V Blocks Magnetic Blocks and V Blocks Clamps and Vises Clamps and Vises Lot of Levels and T Squares Lot of Levels and T Squares Surface Plate 72" X 168" X 1 1/4" Assorted Metal Assorted Metal Assorted Jump Cables Assorted Jump Cables Lot of Hardware Bins Lot of Hardware Bins Waste Bin Waste Bin Shelf of Sanding Supplies and Scotch-Brite Shelf of Sanding Supplies and Scotch-Brite Lot of Oil, Wd-40, Cleaners, Chemicals Lot of Oil, Wd-40, Cleaners, Chemicals Lot of Rivets, Hardware, Parts Lot of Rivets, Hardware, Parts Keter Shelves 36" Wide Shelves of Hardware, Shims, Hose Connectors 2 Shelves of Hardware, Shims, Hose Connectors Plastic Shelves 36" Wide Shelf of Fittings, Sanding Pads, Hardware Shelf of Fittings, Sanding Pads, Hardware Shelf of Bolts, Clamps, Hardware Shelf of Bolts, Clamps, Hardware Keter Shelves 36" Wide Shelf with Grade 8 Bolts and Hardware 36 1/2 Wide Black Shelf with Bolts and Clamps 36 Wide
10 Hardware Drawers and Contents 14 Wide Wall-Mounted Hardware Racks and Contents Each 34 3/4" Wide Lot of Steel Pipe and Plates Lot of Steel Pipe and Plates Plastic Shelves 36" Wide Lot of Exhaust Pipe and Steel Tubing Lot of Exhaust Pipe and Steel Tubing Steel Cart 24" X 36" Assorted Exhaust Piping Assorted Exhaust Piping Werner 10' A Frame Ladder Werner 10' A Frame Ladder 1290a 1 8' Werner A Frame Ladder 8' Werner A Frame Ladder Husky 4' A Frame Ladder Husky 4' A Frame Ladder Hydraulic Long Ram Jack 8 Ton Capacity Ac Hydraulic Jack 1 Ton Capacity, Model WJN10, No Load Bar Load Bar Hoist Load Bar Hoist Roughneck 15 Gallon Portable Oil Drain Dolly Roughneck 15 Gallon Portable Oil Drain Dolly Bar Racks 13 Bar Racks Aluminum Wheel with Tire Michelin XZE 255/70 R Aluminum Wheel with Tire Michelin XZE 255/70 R Aluminum Wheel with Tire Goodyear G661 HSA 2285/75 R Bridgestone Tire M /75 R Assorted Hitches and Hoses Assorted Hitches and Hoses Assorted Wix and Cummins Filters Assorted Wix and Cummins Filters Shop Table 36 3/4" X 75 1/4" Mud Flaps and 2 Mounts 6 Mud Flaps and 2 Mounts Black Widow Folding Ramps 1500Lb Capacity " Tote 43" Tote Assorted Furniture Dollies Assorted Furniture Dollies Skid of Air Hose Skid of Air Hose Skid of Air Hose Skid of Air Hose Tote of Cords Tote of Cords Tote of Cords Tote of Cords Tote of Cords Tote of Cords Tote of 3 Phase Cords Tote of 3 Phase Cords Tote of Straps Tote of Straps
11 Tote of Straps Tote of Straps Tote of Straps Tote of Straps Tote of Straps Tote of Straps Tote of Straps Tote of Straps Tote of Straps Tote of Straps Tote of Straps Tote of Straps Tote of Straps Tote of Straps Tote of Straps Tote of Straps Tote of Straps and Bungee Cords Tote of Straps and Bungee Cords Box of O Rings Box of O Rings
BIDITUP AUCTIONS & APPRAISALS VENTURA BLVD., SECOND FLOOR STUDIO CITY, CA (818) FAX (818)
This catalog is meant merely as a guide. The Auctioneers do not warrant the accuracy, genuineness, authenticity, description, weight, count or measure of any of the lots specified herein. Lot Qty. Description
More informationAuction Catalog. Auction Date:
Auction Catalog Reliable System Solutions Inc Auction Date: Tuesday, Feb. 11, 2014 Bidding Starts: 9:00 AM (PST) KD Auctions 7918 E.McClain Dr. Suite 101 Scottsdale, AZ 85260 Phone: (480) 455-3910 Email:
More informationFurrow Auction Company
Furrow Auction Company Absolute Auction Hodges Machine Shop and Tool Repair Total Liquidation of 50 year old Hodges Machine Shop and Tool Repair Company specializing in Hydraulic Cylinder Repair 145 Riverview
More informationCLT Auctions. Manual & Light CNC Machine Shop. Ends from Mar 06, am EST (3pm GMT) Description
CLT Auctions Manual & Light CNC Machine Shop Ends from Mar 06, 2019 10am EST (3pm GMT) 4400 Friendship Dr STE C Matthews North Carolina 28105 United States Lot Description 1 MITEE-BITE T slot kit 2 Vise
More information1 Pallet Jack. 2 Dock Plate. 3 Presto Lift. 4 Winch & Charger. 5 No 3 1/2 Greenerd Arbor Press. 6 Pedistal Grinder. Stockwell Equipment Co.
Phone: 1 Pallet Jack. 2 Dock Plate. 3 Presto Lift 4 Winch & Charger. 5 No 3 1/2 Greenerd Arbor Press 6 Pedistal Grinder Page: 2 7 Craftsman Pedistal Ginder 7a Lot of tools. 7b Mix lot tools, Clamps, measuring
More information1 Pallet Jack. 2 Dock Plate. 3 Presto Lift. 4 Winch & Charger. 5 No 3 1/2 Greenerd Arbor Press. 6 Pedistal Grinder. Stockwell Equipment Co.
Phone: 1 Pallet Jack. 2 Dock Plate. 3 Presto Lift 4 Winch & Charger. 5 No 3 1/2 Greenerd Arbor Press 6 Pedistal Grinder Page: 2 7 Craftsman Pedistal Ginder 8 Metal Table. 9 Metal table. 10 Rack and Steel
More information1 1 John Deere DI55 48" Cut, 54 hrs 2 1 John Deere L MASTERHAND ROLLCAB TOOL CHEST 4 1 NORTHSTAR PRESSURE WASHER 5 1 AIRTANK 6 1 LP TANK 7 1
1 1 John Deere DI55 48" Cut, 54 hrs 2 1 John Deere L100 3 1 MASTERHAND ROLLCAB TOOL CHEST 4 1 NORTHSTAR PRESSURE WASHER 5 1 AIRTANK 6 1 LP TANK 7 1 STANDS 8 1 HYDRAULIC JACK 9 1 TROLLEY HYDRAULIC JACK
More informationSTC-COMBI - Industrial Storage & Tooling Cabinet Package Deal
STC-COMBI - Industrial Storage & Tooling Cabinet Package Deal 900 x 450 x 1800mm 150kg Shelf Load & 75kg per Drawer Load Capacity Ex GST Inc GST $1,060.00 $1,166.00 ORDER CODE: MODEL: Shelf Load Capacity
More informationLATE MODEL MACHINE SHOP & TOOLROOM
LIVE ONSITE & WEBCAST AUCTION Plant Closure of: VENTURE PRECISION TECHNOLOGY AUCTION Thursday, December 3rd at 11:00am (CST) ASSET LOCATION 1881 Treble Drive Humble, TX 77338 INSPECTION Wednesday, December
More informationWTC Industrial Mobile Tooling Cabinet Workstation
WTC-1450 - Industrial Mobile Tooling Cabinet Workstation 1170 x 580 x 1450mm 100kg per Drawer Ex GST Inc GST $1,050.00 $1,155.00 ORDER CODE: MODEL: T773 WTC-1450 Number of Drawers (No.): 5 Drawer Load
More informationALLENAIR FLUID POWER DAY 2 BIDDING ENDS AUGUST 9 TH AT 10AM EDT
451 SECTION OF PALLET RACKING; (8) 8' HORIZONTAL BEAMS, (2) 12' UPRIGHTS WITH CONTENTS (NO ELECTRIC MOTORS) 451A 40' CONX BOX 452 SECTION OF PALLET RACKING; (6) 96'' HORIZONTAL BEAMS, 12' UPRIGHTS WITH
More informationM. R. JUTZI AUCTIONS. Woodworking & Fabricating Equipment AUCTION. Wednesday, May 26, 10:00 a.m.
M. R. JUTZI AUCTIONS Woodworking & Fabricating Equipment AUCTION Being Held at: 777 LAWRENCE ST, CAMBRIDGE, ON Wednesday, May 26, 2010 @ 10:00 a.m. Auction Catalog Lot# Quantity Description 2 1 VISE 3
More informationLaudiston Valuers & Auctioneer SALE: 752S DATE: 28 March 2012 at 10:00AM SM GENERAL ENGINEERING 5 CARIO STREET BULIMBA QLD
SM GENERAL ENGINEERING 5 CARIO STREET BULIMBA QLD _ 2 QUANTITY OF MEASURING INSIDE & OUTSIDE CALIPERS 3 VERNIER CALIPER - SME 4 DIAL CALIPER - NSK 5 VERNIER CALIPER 6 VERNIER CALIPER 7 OUTSIDE MICROMETER
More informationIWB-12 - Industrial Work Bench
IWB-12 - Industrial Work Bench 1200 x 750 x 900mm 1000kg Load Capacity Ex GST Inc GST $270.00 $297.00 ORDER CODE: A415 MODEL: Type: IWB-12 Steel with Laminated Top Table Top Load Capacity (kg): Number
More informationTUESDAY, OCTOBER 27, 2015 *** 1:00 P.M. ***
TUESDAY, OCTOBER 27, 2015 *** 1:00 P.M. *** WELCOME TO THE AUCTION SALE OF JP JIG BORING INC. 133 REGINA ROAD VAUGHAN, ONTARIO, CANADA, L4L 8L9 TERMS & CONDITIONS FINAL PAYMENT IN FULL IMMEDIATELY AFTER
More informationBIDITUP! An Industrial Assets Co VENTURA BLVD., SECOND FLOOR STUDIO CITY,CA (818) FAX (818)
This catalog is meant merely as a guide. The Auctioneers do not warrant the accuracy, genuineness, authenticity, description, weight, count or measure of any of the lots specified herein. Lot Heading Qty.
More informationAuction Catalog. Auction Date:
Auction Catalog CNC Turning and Screw Machinery Shop Closing, (Online), Location: Gilbert, AZ Auction Date: Tuesday, February 20, 2018 Bidding Starts: 10:00 AM (Arizona Time) KD Auctions 7918 E.McClain
More informationTIMTOS 2017 EXHIBITS PROFILE
TIMTOS 2017 EXHIBITS PROFILE Product Code Product Name METAL CUTTING MACHINE TOOL Lathes and Turning Machines 160101 Lathes, Swiss Type 160502 Bench Lathes 160503 High Speed Lathes 160504 Automatic Lathes
More informationBSC Industrial Storage Cabinet
BSC-900 - Industrial Storage Cabinet 900 x 450 x 900mm 150kg Shelf Load Capacity Ex GST Inc GST $320.00 $368.00 ORDER CODE: MODEL: Shelf Load Capacity (kg): Drawer Load Capacity (kg): Dimensions (L x W
More informationBIDITUP! An Industrial Assets Co VENTURA BLVD., SECOND FLOOR STUDIO CITY,CA (818) FAX (818)
This catalog is meant merely as a guide. The Auctioneers do not warrant the accuracy, genuineness, authenticity, description, weight, count or measure of any of the lots specified herein. Lot Heading Qty.
More informationTCW-900NP - Industrial Mobile Tooling Cabinet with Backing Panel
TCW-900NP - Industrial Mobile Tooling Cabinet with Backing Panel 565 x 580 x 1400mm 100kg per Drawer Package Deal Ex GST Inc GST $724.55 $797.00 Package Contents - SAVE $61.00 (Inc) 1x 1x 1x 1x T764 -
More informationAuction Catalog. Lot# Quantity Description 1 1 BOX OF TOOLS 2 1 ELECTRIC STAPLER 3 1 BOOSTER CABLES 4 1 WRENCH & ADJUSTABLE WRENCHES
Auction Catalog M. R. JUTZI AUCTIONS Construction, Auto, Shop & Woodworking Equipment Sale Saturday, November 21, 2015 @ 9:30 am On-Site @ 5100 Fountain St N, Breslau, ON N0B 1M0 Lot# Quantity Description
More informationSSB-18WS - Stainless Steel Work Bench
SSB-18WS - Stainless Steel Work Bench 1800 x 700 x 900mm Ex GST Inc GST $430.00 $473.00 ORDER CODE: MODEL: Type: Table Top Load Capacity (kg): Number of Drawers (No.): Table Dimensions (L x W x H) (mm):
More informationKoster Industries, Inc.
Koster Industries, Inc. Rinaldi Precision Machine Co. Inc. - CNC Machine Shop Vertical machining centers, Leadwell, Fanus, CNC lathes, Johnford, Ikegai, Feeler speed lathe, Turret lathe, Vertical bandsaw,
More informationLOT # QTY DESCRIPTION NOTES
1 1 MACHINE VISE 2 1 MACHINE VISE 3 1 MACHINE VISE 4 1 MACHINE VISE 5 1 MACHINE VISE 6 1 MACHINE VISE 7 1 METAL CART 8 1 - PNEUAMATIC IMPACT WRENCH & AIR CHISSEL 9 1 HOT PLATE 10 1 - SKILSAW & SAWZAWL
More informationINVESTMENT RECOVERY SERVICES
INVESTMENT RECOVERY SERVICES TH Precision - Structural Steel Fabricator & Erector Structural Steel Fabricator & Erector 8593 FM 1101, Seguin Texas 78155 United States Ended Sep 28, 2017 12:58pm CDT (6:58pm
More informationBIDITUP AUCTIONS & APPRAISALS VENTURA BLVD., SECOND FLOOR STUDIO CITY, CA (818) FAX (818)
This catalog is meant merely as a guide. The Auctioneers do not warrant the accuracy, genuineness, authenticity, description, weight, count or measure of any of the lots specified herein. Lot Heading Qty.
More informationONLINE PUBLIC AUCTION: PHOENIX ART GROUP, BY ORDER OF THE BOARD OF DIRECTORS METAL FABRICATION, LASER, PLASMA TABLE, WOOD SHOP, HAND TOOLS, ETC.
Arizona Auctioneers ONLINE PUBLIC AUCTION: PHOENIX ART GROUP, BY ORDER OF THE BOARD OF DIRECTORS METAL FABRICATION, LASER, PLASMA TABLE, WOOD SHOP, HAND TOOLS, ETC. 4130 E. WOOD ST. Phoenix Arizona 85040
More informationPRECISION CABINET WORKS AUCTION Tuesday July 10 at 10:30 am LIVE and Lots 1-15 Simulcast via Proxibid
1 1 HITACHI 15" MITER SAW H-440041 2 1 OMGA RN 450 RADIAL ARM SAW "NEW MOTOR" 3 1 POWERMATIC MODEL 68 TABLE SAW SR# 84688183 4 1 RITTER LINE BORING MACHINE MODEL R-123 SR#269 3/3/94 5 1 BLUM MINI PRESS
More informationACCREDITATION FACILITY AUDIT CHECKLIST
ACCREDITATION FACILITY AUDIT CHECKLIST Institution Name: Date: Designated Trade: Machinist AC #: Contact: Location: Course Duration: of weeks: of hours total: of hours per day: Instructor(s) of Students
More informationITB-48 - Industrial Tool Box (48") 2 x Gas Struts
ITB-48 - Industrial Tool Box (48") 2 x Gas Struts (1220 x 615 x 720mm) Ex GST Inc GST $400.00 $440.00 ORDER CODE: MODEL: Material Thickness (mm): Gas Struts (No.): Box Dimensions (L x D x H) (mm): Nett
More informationBIDITUP AUCTIONS & APPRAISALS VENTURA BLVD., SECOND FLOOR STUDIO CITY,CA (818) FAX (818)
This catalog is meant merely as a guide. The Auctioneers do not warrant the accuracy, genuineness, authenticity, description, weight, count or measure of any of the lots specified herein. Lot Heading Qty.
More informationMACHINE SHOP EQUIPMENT AND TOOLS FOR SALE. Todd S. Gupton Phone: (832) OPEN SHOP
MACHINE SHOP EQUIPMENT AND TOOLS FOR SALE Todd S. Gupton Email: tsgupton@gmail.com Phone: (832) 260-8308 OPEN SHOP SATURDAY - MARCH 25, 2017 9:00 AM TO NOON 1100 DEATS ROAD DICKINSON, TX 77539 White brick
More informationTC Industrial Tooling Cabinet
TC-900 - Industrial Tooling Cabinet 900 x 450 x 900mm 75kg per Drawer Ex GST Inc GST $820.00 $700.00 $902.00 $770.00 Special Ends 25/11/2018 ORDER CODE: MODEL: Number of Drawers (No.): Drawer Load Capacity
More informationProduct Brochure For T739. Description. Features. Sydney: (02) Brisbane: (07) Melbourne: (03) Perth: (08)
ITB-S3 - Industrial Tool Box Set (30", 36", 48") Package Deal 1 x Gas Strut on 36", 2 x Gas Struts 48" (762 x 356 x 254mm) + (915 x 432 x 540mm) + (1220 x 615 x 720mm) Ex GST Inc GST $590.00 $649.00 ORDER
More informationAmerican Auctioneers Group
American Auctioneers Group AMADA SHEET METAL FABRICATION FACILITY - MFG OF CUSTOM OUTDOOR LIGHTING 8629 BRADLEY AVE SUN VALLEY California 91352 United States Started Feb 04, 2016 11am PST Lot Description
More informationSheet Metal Tools. by:prem Mahendranathan
Sheet Metal Tools by: SHEET METAL TOOL KIT SHEET METAL TOOLS Rivet Gun 3/32, 1/8, 5/32, 3/16",Cupped Set Mini Bucking Bar Footed Heel-Toe Bucking Bar Air Tool Oil Mechanics Tool Bag High-Speed Air Drill
More informationAuction Catalog. Lot# Quantity Description 1 1 WHEELBARROW WHEEL 2 1 BOX OF GAUGES 3 1 BOX OF GAUGES pc WOOD CHISEL SET pc WOOD CHISEL SET
M. R. JUTZI AUCTIONS Auction of -- Metal, Woodworking, Construction & Shop Equip for: Waterloo Region School Board & Others Saturday, August 17, 2013 @ 9:00 am On site @ 5100 Fountain St N, Breslau, ON
More informationLARGE CAPACITY PRECISION CNC MACHINING, TURNING, BORING & MACHINE SHOP FACILITY
PUBLIC WEBCAST AUCTION LARGE CAPACITY PRECISION CNC MACHINING, TURNING, BORING & MACHINE SHOP FACILITY AUCTION: THURSDAY, APRIL 28 AT 10:00 AM CDT INSPECTION: WEDNESDAY, APRIL 27 FROM 8:00 AM TO 4:00 PM
More informationArchitecture and Construction Plumbing and Pipefitting Revised 8/30/2012 Item Number Price Per Piece Total
Architecture and Construction Plumbing and Pipefitting Revised 8/30/2012 Item Number Price Per Piece Total 2ft. Level 3 $7.00 $21.00 4ft. Level 2 $14.00 $28.00 Pipe Rack 2 $300.00 $600.00 Adjustable Pipe
More informationLOT QTY DESCRIPTION NOTE 2 CONTENTS WORKSHOP OFFICE INCLUDING FITTINGS, PICTURES, HORNBY RACE CAR SET, ETC
1 CONTENTS LOFT OFFICE INCLUDING P.C, DESKS, CHAIRS, ETC 2 CONTENTS WORKSHOP OFFICE INCLUDING FITTINGS, PICTURES, HORNBY RACE CAR SET, ETC 3 TURNED TIMBER BALUSTRADE, METAL BALUSTRADE & TIMBER STOCKS 4
More information15 WESTERN ARCTRONICS 30KVA SPOT WELDER 16 CUSTOM BUILT BEAD ROLLER
Item SOUTHERN MECHANICAL CONTRACTOR Description (LOCATED IN REAR BUILDING) 1 (2) MITUTOYO DIGITAL 6" CALIPERS, MITUTOYO 6" CALIPER 2 8" JAW VISE 3 (3) ELECTRIC NIBBLERS 4 MILWAUKEE MAGNETIC DRILL 5 RIDGID
More informationIWB-40 - Industrial Work Bench
IWB-40 - Industrial Work Bench 1800 x 750 x 900mm 1000kg Load Capacity On Sale Ex GST Inc GST $398.00 $343.48 $457.70 $395.00 ORDER CODE: A420 MODEL: Type: IWB-40 Steel with Laminated Top Table Top Load
More informationLOT QTY DESCRIPTION NOTE (APPROX) x BLACK & GALV SHEET STEEL, 1 x BAY, UP TO 1800 x 1200mm, VARIOUS GAUGES, APPROX mm
1 PIGEON HOLE STORAGE RACK, 240 x 180cm, 58 x NESTS, WALL MOUNT 2 3 & SINGLE PHASE CIRCUIT BREAKERS, 2-100AMP 3 FABRICATED HAND PRESS, SUIT BENCH TOP MOUNT 4 QUANTITY NYLON INSULATION, 30-100mm DIAMETER
More informationA M Supply Co. Metalworking Machinery. Drill Presses Jet Tools J-2221VS 20" Variable Speed Drill Press 115/230V 1Ph
Drill Presses J-2221VS 20" Variable Speed Drill Press 115/230V 1Ph Part # Style Drills to Center Drilling Cap. Cast Drilling Cap. Mild Distance Column Circle Iron Steel to Spindle 354221 Variable 20" 1-1/4"
More informationMaynards Industries (1991) Inc.
Maynards Industries (1991) Inc. Alpha Tool & Automation Webcast-Online Only Auction of Alpha Tool & Automation, Inc 2089 Heide Drive Troy Michigan 48084 United States Apr 20, 2016 11am EDT (8am PDT) Lot
More informationBLADES ENTERPRISES, LLC Trans X Drive Novi, MI Tel: Fax:
CAGE CODE: 59V92 DUNS# 826846284 JCP Cert# 0051780 NAICS: 332116, 332212, 332213, 332710, 332721, 332722, 332999, 333512, 333513, 333514,333515, 333518, 333613, 333992, 336992 FSC: 1005, 1010, 1015, 1020,
More informationTCW Industrial Tooling Cabinet
TCW-1200 - Industrial Tooling Cabinet 881 x 653 x 1200mm 100kg per Drawer Ex GST Inc GST $1,070.00 $1,230.50 ORDER CODE: MODEL: T772 TCW-1200 Number of Drawers (No.): 7 Drawer Load Capacity (kg): 100 Maximum
More informationALLENAIR FLUID POWER DAY 1 BIDDING ENDS AUGUST 8 TH AT 10AM EDT
1 ENERPAC PORTA POWER WITH (3) SMALL JACKS 2 HEATHKIT MODEL C1-1080 EXHAUST GAS ANALYZER 3 HEATHKIT MODEL CM-11551 DIGITAL ENGINE ANALYZER 4 EDELMANN 97 VACUUM SYSTEM ANALYZER 5 SEARS CRAFTSMAN TIMING
More informationPUBLIC AUCTION ANTHOS ENGINEERING. Let Our Experience Be Your #1 Asset TM Tranmere Drive, Unit 4 Mississauga, Ontario L5S 1N4 DATE TIME LOCATION
PUBLIC AUCTION ANTHOS ENGINEERING 1999 programmable coolant hyd clamp & feed HAAS VF3 CNC vertical machining center 6 X 6 X 1/2 100 ton HYD-MECH H-12 horizontal band saw 2001 5000 hrs EDWARDS hydraulic
More informationIWB-12P2 - Industrial Work Bench Package Deal 1200 x 750 x 1725mm 1000kg Load Capacity
IWB-12P2 - Industrial Work Bench Package Deal 1200 x 750 x 1725mm 1000kg Load Capacity On Sale Ex GST Inc GST $599.13 $565.22 $689.00 $650.00 Package Contents - SAVE $148.10 (Inc) 1x 1x 4x 4x 1x 1x 1x
More informationStone Auctioneers & Appraisers
Stone Auctioneers & Appraisers ONLINE ONLY AUCTION! Machine Shop Closed by Order of Secured Lender! **Lots 134-137 are consigned & located in Columbus, Mississippi! Everything must be sold and building
More informationAbsolute Public Auction!!!
PUBLIC AUCTION Alan Industries Complete Liquidation MANY OTHER ITEMS TOO NUMEROUS TO MENTION TERMS CASH MARK THIS DATE ON YOUR CALENDAR TERMS: Everything is sold as is, where is without any guarantee or
More informationTUESDAY, APRIL 28, 2015 *** 10:30 A.M. EDT *** WELCOME TO THE AUCTION SALE OF
TUESDAY, APRIL 28, 2015 *** 10:30 A.M. EDT *** WELCOME TO THE AUCTION SALE OF Surplus to the Ongoing Needs of DEC INDUSTRIES INC. 2240-43rd AVENUE LACHINE, QC, H8T 2J8 TERMS & CONDITIONS FINAL PAYMENT
More informationAlpen Machine & Tool Ltd.
Due to Owner Retiring Alpen Machine & Tool Ltd. State of the Art CNC Precision Component Manufacturer 41A Buttermill Avenue, Concord, ON APPROX. $1.3M REPLACEMENT (6) PALLET CHANGER 2,480 HRS 1,173 HRS
More informationHEAVY DUTY BENCH GRINDERS
HEAVY DUTY BENCH GRINDERS BGC-6 (240153) / BGC-8 (240154) Heavy duty construction for maximum service life CSA electrics for safety and reliability All ball bearing construction Steel wheel covers with
More informationALL IS SOLD "AS-IS,WHERE-IS"-NO WARRANTIES EXPRESSED/IMPLIED
Page 1 This catalogue is meant merely as a guide. The auctioneer does not warrant the genuineness, accuracy or count of any items described herein. 1 LOT: Victor Welding & Cutting Set, with Accessories
More informationWORKSHOP EQUIPMENT. TIGER 2000S Ø200 x 40mm K 220 grinder stone 120W / 240V motor. Order Code: W859 $220 RRP JIG 60. Order Code: W8642 $38 50 RRP
WORKSHOP EQUIPMENT NOV-DEC 2018 JAN 2019 INDUSTRIAL BENCH GRINDER WITH LINISHER & MITRE TABLE X8-PLUS 200mm medium grade wheel 750W / 1hp 240V motor Disc Mitre Table with Guide WETSTONE GRINDER TIGER 2000S
More informationNATIONAL CERTIFICATE (VOCATIONAL) NOVEMBER
MARKING GUIDELINE NATIONAL CERTIFICATE (VOCATIONAL) NOVEMBER 2009 NQF LEVEL 2 This memorandum consists of 7 pages. MARKING GUIDELINE -2- NC930(E)(N25)V QUESTION 1: GENERAL. 1.1 TRUE OR FALSE 1.1.1 1.1.2
More informationRoyal Corporation, Chennai
+91-8071676709 Royal Corporation, Chennai https://www.indiamart.com/royalcorporation/ We are the trader of measuring instruments, cutting tools, lifting tools and magnetic tools. All our products find
More information535A. Main Components. Pipe and Bolt Threading Machine. Printed in U.S.A. Ridge Tool Company/Elyria, Ohio, U.S.A.
Pipe and Bolt Threading Machine A Main Components 0 Screw, Button Head /" - 0 x /" () Washer, Flat /" ()" Top Cover 0 Base Bottom Cover Screw, Pan Head # - x " () Carriage Assembly 0 Front Support Bar
More informationLot 2 - Mobile Battery Boost Pack. Lot 4 - Zanrosso 280 Crankshaft Grinding Machine with Bench & Tools. Lot 6 - Assorted Cranks with Stands
2018 Voluntary Closure of Palm Motor Engineering Onsite Auction Thursday, 15 November @ 10h30 Venue: 36 Geduld Rd, Geduld Ext 1, Springs, 1559 Lot 1 - Assorted Battery Chargers Lot 2 - Mobile Battery Boost
More informationSCOPE DOCUMENT DATE OF DISTRIBUTION VIA WEBSITE. No other documents will be produced prior to the competition
SCOPE DOCUMENT Competition Year 2013 Competition location Vancouver, BC Trade Number 91 Trade Name Aircraft Maintenance Level Post- Secondary 1. INTRODUCTION 1.1 Purpose of the Challenge. To assess the
More informationPlant Closed EXCEL TOOL, INC. 162 Tabor Ave Falls Mills, Virginia Northwest of Bluefield, West Virginia
Complete CNC and Conventional Machine Shop Including CNC Flat Bed Lathes, CNC VMC, CNC Turning Center, Boring Mills, Conventional Toolroom Machinery, Tooling and Shop Equipment Plant Closed EXCEL TOOL,
More informationSolutions AGRICULTURAL LABORATORY & CLASSROOM FURNITURE. Education to Industry. Solutions for Your Workspace & Storage Needs
AGRICULTURAL LABORATORY & CLASSROOM FURNITURE Education to Industry for Your Workspace & Storage Needs www.ageducationalsolutions.com 864-256-0621 info@ageducationalsolutions.com Workbenches Potting Benches
More informationDrive Sockets Wrenches Axle Stands Torches Sealants Electric Hand Tools Sealers Page 33
Tools Drive Sockets Wrenches Axle Stands Torches Sealants Electric Hand Tools Sealers Page Battery Charger Page Torch Page Compressor Page Jacks Page Sockets Page 0 Socket Tester Page Contents Page Tools:
More informationBMG METALS PRODUCT & SERVICE GUIDE TOTAL METALS SINCE 1963
BMG METALS PRODUCT & SERVICE GUIDE BMG is proud to have been serving the mid-atlantic region for over 50 years by supplying carbon steel, stainless steel, aluminum, as well as rebar fabrication, plasma
More informationEVOLUTIONS TOOL & DIE Tool & Die Shop - Complete Liquidation
Thompson Auctioneers EVOLUTIONS TOOL & DIE Tool & Die Shop - Complete Liquidation VIPER Model VMC-1230 AG Vertical Machining Ctr, Lagunmatic CNC Vertical Knee Mill, Kent Model SGS618M Hand Feed Surface
More informationMarch weeks. surcharge for
March weeks valid until 31.03.2012 all quoted prices are incl. 19% VAT for deliveries in the EU countries to customers with a valid VAT-no. and for deliveries in not EU member countries the VAT is not
More informationMOVING AUCTION Saturday, June 10:00 AM
MOVING AUCTION Saturday, June 20 @ 10:00 AM (Alternate date in case of weather cancellation is Sunday, June 21 @ 12:00 Noon) Owners: Karl & Sue Venneberg Location: 800 79 th Ave NE, Bismarck, ND Directions:
More informationASSIGNMENT 4. Textbook Assignment: The point, edge, face, heel, and tang are the five parts of which of the following tools?
ASSIGNMENT 4 Textbook Assignment: "Files," "Grinders and Sharpening Stones," "Scrapers," "Awls," "Bolt and Cable Cutters," "Glass Cutters," "Knives,' 'Pipe Cutting and Threading Tools," "Tube Cutting and
More informationComplete Sellout of Bay Area Metal Fabricator
Complete Sellout of Bay Area Metal Fabricator Auction Opens: Tue, Mar 5 10:00am Auction Closes: Thu, Mar 7 11:00am 0100 Verson 90 Ton Electric Steel Press Brake 0100A (400+) Press Brake Dies on Steel Rack
More information2018 Facilities List
08 Facilities List 0 DOOSAN LYNX 00 0" CHUCK CNC TURNING CNC LATHE CENTER HIGH SPEED VERTICAL MILLING 00 MATSUURA RA IIG CENTER WITH PALLET CNC MILL CHANGER HIGH SPEED VERTICAL MILLING 999 DAEWOO DMV-400
More informationQuaker City Auctioneers
Quaker City Auctioneers ALLIANCE REMANUFACTURING Specializing in Diesel Engine Parts Ended Nov 17, 2017 1:49pm EST 620 East Erie Avenue Philadelphia Pennsylvania 19134 United States Lot Description 1 6
More informationAUT 107 Mechanical Systems I 3 Credits College Now/CTE Student Outcomes Checklist cocc.edu/departments/college-now Student s Name
3 Credits College Now/CTE Student Outcomes Checklist cocc.edu/departments/college-now Student s Name Student s Signature Completion Date High School Teacher s Signature Recommended Grade High School COCC
More informationAuction Catalog. Lot# Quantity Description 1 1 FLOOR JACK & STANDS SET 2 1 BOX OF BOTTLE JACK, WRENCHES & GREASE GUNS 3 4 PIPE WRENCHES
Auction Catalog M. R. JUTZI AUCTIONS Construction, Shop & Woodworking Equip Auction Saturday, March 21, 2015 @ 9:00 am On-site @ 5100 Fountain St N, Breslau, ON N0B 1M0 Lot# Quantity Description 1 1 FLOOR
More informationCHAMTEK MFG., INC. PROTOTYPE THROUGH PRODUCTION. Sheet metal Fabrication. CNC and General Machining. Assembly. Tooling CAD/CAM.
CHAMTEK MFG., INC. PROTOTYPE THROUGH PRODUCTION Sheet metal Fabrication CNC and General Machining Assembly Tooling CAD/CAM Stamping 123 Louise St. Rochester, NY 14606 TEL (585) 328-4900 FAX (585) 328-2938
More information1500HD Assembly & Operation Manual 1500 lb. Capacity Motorcycle Lift
1500HD Assembly & Operation Manual 1500 lb. Capacity Motorcycle Lift 1500HD Assembly Instructions Assembly 1. Remove the lift and all parts from the wooden crate 2. Remove the pump from the cardboard box
More informationAuction Catalog. Auction Date:
Auction Catalog Arizona Engineering Auction Date: Tuesday, March 4, 2014 Bidding Starts: 10:00 AM (MST) KD Auctions 7918 E.McClain Dr. Suite 101 Scottsdale, AZ 85260 Phone: (480) 455-3910 Email: service@kdauctions.com
More informationBID ONLINE: Thursday, March 29 thru Thursday, April 5
ONLINE AUCTION Fabrication & Machining Company Closing By Order of Secured Lender: 160 Chicago Street Cary, Illinois 60013 BID ONLINE: Thursday, March 29 thru Thursday, April 5 INSPECTION DATE: Wednesday,
More informationWagons & Chests. Tool Sets. (FA Series) Modular Storage Tray Sets. Full-extension ball bearing drawer slides open and close easier
Wagons & Chests Modular Storage Tray Sets Tool Sets (FA Series) Full-extension ball bearing drawer slides open and close easier Anti-shock protection on all four corners Central locking with two reversible
More informationno mm no Dividers with scriber 150 mm NEW Square wedge-shaped knife edges on the length side
Summer Promotion valid until 30.06.2013 all quoted prices are incl. VAT for deliveries to EU countries to customers with valid VAT-no. and for deliveries in non EU member countries the VAT is not applicable
More informationASSIGNMENT 3. Textbook Assignment: 3-5. Which of the following types of hammers is used for driving and pulling nails?
ASSIGNMENT 3 Textbook Assignment: "Clamps," "Jacks," Hammers, Mallets, and Mauls," "Screwdrivers," "Manual Drills," "Screw and Tap Extractors," "Wrenches," "Chisels," and "Punches," chapters 19 through
More informationAuction Catalog. Lot# Quantity Description 1 1 BOX OF SCREWDRIVERS & TOOLS 2 1 TOOL BOX & TOOLS N/R. 3 1 BLUE BIN c/w TOOLS, N/R
Auction Catalog M. R. JUTZI AUCTIONS Saw Sharpening, Woodworking, Auto & Shop Equipment Auction Saturday, January 10, 2015 @ 9:30am On Site @ 5100 Fountain St N, Breslau, ON N0B 1M0 Lot# Quantity Description
More informationAzmeera & Sons.
+91-8071681915 Azmeera & Sons https://www.indiamart.com/azmeerasons/ We have garnered a distinct position in the market as wholesaler, retailer and trader of a range of Industrial Tools & Accessories.
More informationWORKSHOP FURNITURE. Rugged, Heavy Duty, Quality Steel Construction. Optional drawer. Lower shelf same length as worktop
Designed For Todays Technical Workspace Environment Rugged, Heavy Duty, Quality Steel Construction Bench tops are 29" deep, not 24" as with most common benches Superb powder coat finish Modern design Optional
More informationTHURSDAY JULY 10, 2014 *** A.M. *** WELCOME TO THE AUCTION SALE OF LENS TOOL AND MOULD LTD KEW DRIVE WINDSOR, ON N8T 3C6
THURSDAY JULY 10, 2014 *** 10.30 A.M. *** WELCOME TO THE AUCTION SALE OF LENS TOOL AND MOULD LTD. 2882 KEW DRIVE WINDSOR, ON N8T 3C6 TERMS & CONDITIONS FINAL PAYMENT IN FULL IMMEDIATELY AFTER THE AUCTION
More informationKIT DAD OUT FOR THE SEASON
ON SALE 1st Aug - 31st Oct 14 KIT DAD OUT FOR THE SEASON 213PC TOOL KIT 6 Drawer Toolchest with BBS Multiple inserts for organised tools 30PC Hexagon Key AF 24PC Comb Spanner 54PC Bit PC ¼ & 3/8 DR Socket
More informationInspection. Assembly Install the springs. 1. Discard the 0-rings. 2. Clean all parts in cleaning solvent.
6010-34 Inspection 3. Install the springs. 1. Discard the 0-rings. 2. Clean all parts in cleaning solvent. 3. If spring test equipment is available, check the tension of each spring according to the specifications
More information1822-I. Spindle Assembly. Pipe and Bolt Threading Machine. Ridge Tool Company/Elyria, Ohio, U.S.A. 2* 3 4 5* * *
-I Pipe and Bolt Threading Machine Spindle Assembly * * * 0 * * * 0 * * 0* * * Rear Cover * Screw () * Washer () Top Cover w/clips (Includes,, ) * J Clip () Front Cover * Screw () Pivot Rod Support ()
More informationHYDRAULIC CONTROL DETAILS PARTS LIST
Always give model number, serial number and part number when ordering repair parts. HYDRAULIC CONTROL DETAILS PARTS LIST REF NO. PART NUMBER DESCRIPTION 1 101939 Hydraulic Tank 2 101940 Hydraulic Tank
More informationDainichi CNC Tuning Center, Mdl B45, X=9.1, Z=24.4, 17.3 Swing, 24.2 Max Turn, 32 DBC, 8 Chuck,
CMC Corporation Real Estate: 2760 Pawnee Road 1.36 Acres Birmingham, AL 2000 sq. ft. Offices, 17,180 Shops August 11 @ 10:30 am CNC MACHINING & TURNING: Fadal VMC6030 Machining Center, Mdl 907 1, X = 60,
More informationDK Mechanical Auction Lot List
1 2 Dewalt D28110 4 1/2 inch Electric Angle Grinders 2 3 Dewalt D28110 4 1/2 inch Electric Angle Grinders 3 4 Assorted Makita,Milwaukee,Chicago Elec and Drill Master 4 1/2 inch Electric Angle Grinders
More informationCross Peen Hammer. Introduction. Lesson Objectives. Assumptions
Introduction In this activity plan students will develop various machining and metalworking skills by building a two-piece steel hammer. This project will introduce basic operations for initial familiarization
More informationHOME WORKSHOP HANDBOOK Rugged BENCH GRINDER. By JOEL B. LONG
6 HOME WORKSHOP HANDBOOK Rugged BENCH GRINDER W By JOEL B. LONG ITH this bench grinder you can keep your cutting tools sharp and do general offhand grinding, and can, with the aid of various attachments,
More informationB.E Mini Projects
B.E Mini Projects 2017-2018 S.NO CMP001 CMP002 CMP003 CMP004 CMP005 CMP006 CMP007 CMP008 CMP009 CMP010 CMP011 CMP012 CMP013 CMP014 CMP015 CMP016 CMP017 CMP018 CMP019 CMP020 CMP021 CMP022 CMP023 CMP024
More informationAuction Catalog. Lot# Quantity Description 1 1 SHOVELS & HOES 2 1 SHOVEL SET 3 1 HOE & BROOM SET. 4 1 ALUMINUM 4' STEP LADDER
Auction Catalog M. R. JUTZI AUCTIONS Construction, Shop, Sharpening & Woodworking Equipment Auction Saturday, May 23, 2015 @ 9:00 am On-site @ 5100 Fountain St N, Breslau, ON Lot# Quantity Description
More informationDIE CAST MACHINERY, LLC Hermel Die Casting Corporation - Online Auction Starts Oct. 06, :00am First Lot Ends Oct. 21, :00 am CDT
Lot 1 Milwaukee Electro Magnetic Drill Press, With 3MT Motor Cat.No.4292-1,1/2" Capacity S/N 0050025983 (Inventory Number 3764) Lot 2 Magnetic tool Company Magnetic Base Drill Press, Model 3,90 Watt,5/8"
More informationBuild a Drill Press Vise
Youth Explore Trades Skills Introduction This activity plan will develop the student s machining and metalworking skills as they fabricate a multi-piece steel vise. The project will encompass basic lathe
More informationIndustrial Machinery Auction
Industrial Machinery Auction Auction Opens: Tue, Jun 20 8:00am ET Auction Closes: Tue, Jun 27 3:00pm ET Lot Title 0001 Acer Mill Model 3VS 0002 Milling Machine Head Fixture 0003 Harig Model 612 Surfacer
More information