OLIVER MACHINERY. Revised 5/2017 $ Catalog 2017 Oliver Machinery

Transcription

1 OLIVER MACHINERY $2.00 i Revised 5/2017

2 table of contents OLIVER HISTORY Tradition and Innovation... 1 MACHINES Classic Lathe Table Saw Table Saw Table Saw Jointer Jointer Jointer Jointer Jointer Parallelogram Jointer Planer Planer Planer Planer Band Saw Band Saw Band Saw Band Saw Band Saw & 4685 Horizontal Band ReSaw Shaper Straight Line Ripsaw Multiple Blade Ripsaw Cutoff Saw Cutoff Saw Automatic Cutoff Saw Boring Machine Boring Machine Boring Machine Double-Sided Planer Wide Belt Sander Wide Belt Sander Double Wide Belt Sander Double Wide Belt Sander Double Wide Belt Sander Heavy-Duty Double Wide Belt Sander Heavy-Duty Double Wide Belt Sander Heavy-Duty Double Wide Belt Sander Tilting Edge Sander Oscillating Edge Sander Single Spindle Manual Dovetail Single Spindle Automatic Dovetail Disc Sander Oscillating Spindle Sander Round Rod Milling Machine Through Feed End Matcher Dust Collection Stock Feeders Robland Specialized Machines Warranty Info For more information about Oliver Machinery products, or to find an authorized dealer nearest you, visit us online at or call toll free All efforts have been made to ensure that the information in this catalog is accurate. However Oliver Machinery does not guarantee the accuracy of this information and reserves the right to change information in this catalog without notification. ii

3 Parallelogram Jointer No Jointer our tradition Oliver Machinery can trace its roots all the way back to 1890 in Grand Rapids, Michigan. The company, founded by Joseph W. Oliver, originally designed and manufactured wood trimmers that reduced labor time from 15 minutes to only a few seconds, winning Oliver a gold medal for merit at the 1900 World s Fair in Paris. In 1908 Oliver introduced the round cutterhead, a much safer alternative to the standard square cutterhead. The new safety feature was so apparent that many states soon began requiring their installation. In 1923 Oliver introduced the Straitoplane, a combination planer and jointer that could plane a warped board perfectly flat and straight on both surfaces in one pass. In 1929 Oliver sold over 9000 of these machines. Today Oliver s 5235 double-sided planer is a direct descendant of the classic straitoplane. Over the span of the twentieth century, Oliver adapted to the ever-changing American economy, manufacturing bread-slicers during the depression, saws for cutting aluminum, brass, copper, steel and titanium during World War II, and packaging and printing machinery during the 1950 s and 60 s. By 1994, Oliver had produced over 150,000 machines, 75,000 of which were still in operation on a daily basis worldwide. Today, Oliver machines represent the absolute finest in heavy duty woodworking machines. Read on to browse our innovation and our current lineup. r our innovation Oliver Machinery has a long tradition of innovation. Even since the turn of the century when Oliver introduced the round cutterhead, they have been consistently improving and modernizing their machines to give the user the best product. In the spirit of American ingenuity, Oliver machines improve on existing technology by utilizing features such as helical cutterheads, spiral cutterheads, computerized controls and sensors, segmented infeed rollers, and advanced safety features. In addition to their technological determination, Oliver remains true to the traditions of woodworking machinery. This means their machines are consistently rugged, heavyduty, and better designed than the competition, which means that your wood comes out straighter, more precise, and better crafted than with any other machine. Oliver s machines consistently utilize cutting-edge materials, precision engineering, and innovative features to put them above and beyond the competition. Look inside to see what we mean.r 1

4 2018 Classic Lathe All cast iron construction reduces vibration. Sliding headstock allows outboard turning. Safety guard included. Digital readout of spindle speed for accurate adjustment. Frequency inverter drive includes a wide range of spindle speeds. Reversible motor allows a variety of operations. Comparator included to allow easy replicate spindle projects. Optional bed extension mounts in two positions. Built-in spindle index features 36-positions. Model No Power Requirement 220V (6 AMPS) Main Motor 2HP, 1Ph, 220V only Swing Over Bed 18 Distance Between Centers 42 (57 w/extension) Variable Speed 50-3,200 RPM Speed Range ,200 RPM Speed Range ,200 RPM Spindle 1-1/4-8 TPI RH headstock Indexer Up to 36 Flutes Spindle & Tailstock Tapers MT2 Spindle Bore 9/16 Face Plate OD 6 Centerline of Spindle to Floor 42-1/2 Footprint 69 x 19 Overall Dimension 74 L x 22 W x 55 H 600 lbs THE OPTIONAL OUTBOARD SUPPORT and tool rest allow a huge 35 swing. A FREQUENCY INVERTER DRIVE gives a wide range of RPMs from 50 to A COMPARATOR JIG included with the lathe, makes for easy duplication. 2

5 Table Saw, 5HP Model No Blade Diameter 10 Arbor Diameter 5/8 Maximum Width of Dado 13/16 Maximum Depth of Cut at 90 3 Maximum Depth of Cut at / (5HP, 1Ph) (5HP, 3Ph) Maximum Cut to the Right of Blade 36 / 52 with side table Maximum Cut to the Left of Blade 12 Dust Port Diameter 4 Ø Table Dimensions 27 D x 33 1/3 W w/extensions Wing Size 27 x 12 Table Height 36 Blade Tilt Left Arbor Speed 3,450 RPM Motor (1Ph) 5HP, 220V Only (18 Amps) Motor (3Ph) 5HP, 220V or 440V* Prewired 220V (12 Amps 220V, 6 Amps 440V) Overall Dimensions 74 L x 32-½ W x 40 H 650 lbs Large precision ground table provides a stable work surface. Cast iron base offers a steady platform. Fully enclosed cabinet and blade dust shroud for better dust management. Precision ground 1 arbor. Wide stance trunnion features a left tilt blade. Poly V-belt drive smoothly transfers power to the blade. Hydraulic assisted blade lift mechanism for easy movement. Large chrome hand wheels allow easy adjustments. Includes digital readout of blade tilt. Riving knife splitter for added safety against kick-back. Optimus T-square fence available in 36 or 52 capacity. 36 includes (2) cast iron wings. Optional 52 includes wood side table and (1) cast iron wing. Optional rear support table available. Magnetic controls with emergency off switch. Powerful TEFC motor available in single or three-phase. Miter gauge included. Blade not included. Pictured with optional 52 rail, side and rear tables. A BLADE ENCOMPASSING DUST shroud joined with the standard 4 outlet. *Optional 440/460 volt available special order only. Additional cost/parts may apply. THE 4016 comes standard with a blade guard and a riving knife. A HYDRAULICALLY assisted worm/pinion gear, blade lift mechanism. 3 MITER GAUGE included. A DIGITAL ANGLE METER takes the guess work out of mitre cuts.

6 Table Saw Pictured with optional 52 rail, side and rear tables. Model No Blade Diameter 12 Arbor Diameter 1 Maximum Width of Dado 13/16 Maximum Depth of Cut at 90 4 Maximum Depth of Cut at /3 Maximum Cut to the Right of Blade Maximum Cut to the Left of Blade 12 Dust Port Diameter Table Dimensions w/extensions (5HP, 1Ph) (7.5HP, 3Ph) 36 / 52 with side table 4 Ø 30-3/4 D x 48-1/2 W Wing Size 30-3/4 x 12 Table Height 36 Blade Tilt Arbor Speed Motor (1Ph) Left 3,450 RPM 5HP, 220V Only Motor (3Ph) 7.5HP, 220V/440V* Prewired 220V Overall Dimensions 75 L x 45 W x 41 H 772 lbs *Optional 440/460 volt available special order only. Additional cost/parts may apply. Large precision ground table provides a stable work surface. Cast iron base offers a steady platform. Fully enclosed cabinet and blade dust shroud for better dust management. Precision ground 1 arbor. Wide stance trunnion features a left tilt blade. Poly V-belt drive smoothly transfers power to the blade. Hydraulic assisted blade lift mechanism for easy movement. Large chrome hand wheels allow easy movement. Includes digital readout of blade tilt. Riving knife splitter for added safety against kickback. Optimus T-square fence available in 36 or 52 capacity. 36 includes (2) cast iron wings. Optional 52 includes wood side table and (1) cast iron wing. Optional rear support table available. Magnetic controls with emergency off switch. Powerful TEFC motor available in single or three-phase. Miter gauge included Blade not included. A BLADE ENCOMPASSING DUST shroud joined with the standard 4 outlet. THE 4045 COMES standard with a blade guard and a riving knife. A DIGITAL ANGLE METER takes the guess work out of mitre cuts. HYDRAULICALLY ASSISTED worm/pinion gear, blade lift mechanism. MITER GAUGE included. 4

7 Pro Table Saw Large precision ground table provides a stable work surface. Extra wide cast iron base offers a steady platform. Fully enclosed cabinet for better dust management. Precision ground 1 arbor. Wide stance trunnion features a right tilt blade. Matched 4 V-belt drive smoothly transfers power to the blade. Large chrome hand wheels allow easy adjustments. Optimus T-square fence features 52 rip capacity. Magnetic controls for safer operation. Powerful TEFC 10 HP three-phase motor. Massive twelve-pound miter gauge included. Blade not included. Model No (10HP, 3Ph) Blade Diameter Arbor Diameter 1 Maximum Depth of Cut at /2 Maximum Depth of Cut at /4 Maximum Cut to the Right of Blade 52 Dado Capacity (Optional) 1 Dado Max Depth of Dado (Optional) 1.5 Dado Diameter (Optional) 8 Dust Port Diameter 4 Ø Table Dimensions w/extensions 38 D x 48 W Wing Size 38 x 10 Table Height 36 Blade Tilt Right Arbor Speed 3,750 RPM Motor (3Ph) 10HP, 3Ph 230/460* (230V 30 AMPS) Footprint 38 x 29-1/2 Overall Dimensions 54 D x 85-1/2 W x 42-1/2 H 1,120 lbs *Optional 440/460 volt available special order only. Additional cost/parts may apply. TWELVE POUND MITRE GAUGE MASSIVE, WELL DESIGNED trunnion assembly. 5

8 Jointer w/ Byrd Cutterhead SLIDE FENCE IS EASY to position and adjust. GENUINE BYRD cutterhead comes standard. Model No (1HP, 1Ph, Byrd) Infeed Table Travel 1/2 Cutterhead Speed 5,000 RPM, V-Belts Cutterhead Type Byrd Number of Knives 36 Inserts Rabbeting Capacity 1/2 Max. Cutting Width 6 Max. Cutting Depth 1/2 Fence Dimension 29 x 4 Fence Tilts +/- 90 and 45 Positive Stops 90 and 45 Table Dimensions 45.7 L x 6 W Dust Port Diameter 4 Footprint 36 x 14-3/4 Motor (1Ph only) 1HP 110V (10 AMPS) Overall Dimensions 47.5 L x 20 W x 37 H 250 lbs REINFORCED TABLES ensure rigidity and table flatness. Extra-long precision ground tables provide a stable work surface. Authentic BYRD Shelix cutter head allows smooth cuts. Carbide inserts are indexed for quick changing. Large infeed table hand wheel allows easy adjustment. Built-in chute and 4 port for better dust management. Extra-long precision ground fence tilts 45 degrees both directions with stops. On-off switch can be locked. Powerful TEFC 1HP single-phase motor. CSA Listed 6

9 Jointer Extra-long precision ground tables provide a stable work surface. Cast iron base offers a steady platform. Fully enclosed cabinet for better dust management. Helical cutter head includes German-made carbide inserts. Carbide inserts are indexed for quick changing. Front mounted hand wheels for quick precise adjustments. Extra-long precision ground fence tilts 45 degrees both directions with stops. Large emergency stop switch can be locked. Powerful TEFC 1.5HP single-phase motor. STANDARD helical cutterhead with GERMAN CARBIDE inserts is included with jointer. Model No (1.5HP, 1Ph, Helical) Infeed Table Travel (in.) 1/2 Cutterhead Speed (RPM) 5500 RPM, V-Belts Number of Knives 35 (Helical) Inserts Rabbeting Capacity 1/2 Dust Port Diameter 4 Table Dimensions 66-1/2 L x 7-1/4 W Fence Dimensions 38 L x 4 H Fence Tilts Positive Stops 90 and 45 Footprint 36 x 14-3/4 Motor (1Ph Only) 1.5HP, 110V Plug (13 AMPS) Overall Dimensions 67 L x 24 W x 32 H 480 lbs REINFORCED TABLES ensure rigidity and table flatness SLIDE FENCE IS EASY to position and adjust. 7

10 Jointer Parallelogram w/byrd REINFORCED TABLES ensure rigidity and table flatness. GENUINE BYRD cutterhead comes standard. Model No (2HP, 1Ph, Byrd) Infeed Table Travel 1/2 Cutterhead Speed 5,500 RPM, V-Belts Cutterhead Type Byrd Number of Knives 40 Inserts Rabbeting Capacity 1/2 Max. Cutting Width 8 Max. Cutting Depth 1/2 Fence Dimension 38 x 4-1/64 Fence Tilts +/- 45 and 90 Positive Stops 135,90 and 45 Table Dimensions 72 L x 8 W Dust Port Diameter 4 Footprint 36 x 14-3/4 Motor (1Ph only) 2HP 110V (8 AMPS) Overall Dimensions 83 L x 23 W x 44-1/2 H 473 lbs SLIDE FENCE IS EASY to position and adjust. Extra-long precision ground tables provide a stable work surface. Authentic BYRD Shelix cutterhead allows smooth cuts. Carbide inserts are indexed for quick changing. Parallelogram design produces smooth accurate cuts. Fully enclosed cabinet for better dust management. Built-in casters with locks for easy mobility. Extra-long precision ground fence with pad tilts 45 degrees both directions with stops. Large emergency stop switch can be locked. Powerful TEFC 2HP single-phase motor. CSA Listed. 8

11 Jointer STANDARD helical cutterhead with GERMAN CARBIDE inserts is included with jointer. RACK & PINION FENCE assembly gives superior support and adjustments Model No (2HP, 1Ph, Helical) Infeed Table Travel (in.) 1/2 Cutterhead Speed (RPM) 5500 RPM, 2 V-Belts Number of Knives (Helical) 54 Rabbeting Capacity 1/2 Dust Port Diameter 4 Table Dimensions 74-7/8 L x 9-1/4 W Fence Dimensions 38 L x 4 H Fence Tilts Positive Stops 90 and 45 Footprint 39 x 19 Motor (1Ph only) 2HP, 1Ph only (12 AMPS) Overall Dimensions 78 L x 31 W x 46 H 655 lbs Extra-long precision ground tables provide a stable work surface. Cast iron base offers a steady platform. Fully enclosed cabinet for better dust management. Helical cutterhead includes German-made carbide inserts. Carbide inserts are indexed for quick changing. Large infeed and outfeed table hand wheels allow easy adjustment. Extra-long precision ground fence tilts 45 degrees both directions with stops. Rack and pinion fence adjustment for quick easy set-up. High mounted controls include emergency stop and keyed lock. Powerful TEFC 2HP single-phase motor. 9

12 Jointer 5HP OR 3HP MOTOR WITH TRIPLE V-BELT DRIVE delivers ample power to the cutterhead GENUINE BYRD TOOL cutterhead also available. Model No (3HP, 1Ph, Straight) (29/14.5 AMPS) (5HP, 3Ph, Straight) (11.8/5.9 AMPS) (3HP, 1Ph, Spiral) (29/14.5 AMPS) (5HP, 3Ph, Spiral) (11.8/5.9 AMPS) (3HP, 1Ph, Byrd) (29/14.5 AMPS) (5HP, 3Ph, Byrd) (11.8/5.9 AMPS) Infeed Table Travel (in.) 5/8 Cutterhead Speed (RPM) 6,000 RPM, 3 V-Belts Number of Knives (Straight) 4 Number of Knives (Spiral) 3 Number of Knives (Byrd) 64 Rabbeting Capacity 5/8 Dust Port Diameter 6 Table Dimensions 84 L x 11 W Fence Dimensions 45 L x 4-3/4 H Fence Tilts Positive Stops 90 and 45 Footprint 44-1/4 x 14-3/4 Motor (1Ph) 3HP, 220V Only Motor (3Ph) 5HP, 220V/440V* Prewired 220V Overall Dimensions 84 L x 30 W x 42 H 1,000 lbs *Optional 440/460 volt available special order only. Additional cost/parts may apply. 10 ERGONOMIC CONTROLS & MAGNETIC switch promote usability and safety Extra-long precision ground tables provide a stable work surface. Cast iron base offers a steady platform. Fully enclosed cabinet for better dust management. Available with three styles of a cutter head, straight, spiral, or authentic BYRD. BYRD Shelix carbide inserts are indexed for quick changing. Large infeed and outfeed table hand wheels allow easy adjustment. Extra-long precision ground fence tilts 45 degrees both directions with stops. Slide type fence. High mounted controls include emergency stop and keyed lock. Triple V-belt drive smoothly transfers power to the cutter head. Powerful Baldor TEFC motor available in single or three-phase.

13 Parallelogram Jointer MASSIVE RIBBED cast iron construction ensures flatness, stability & longevity. Model No (Helical) S (3HP, 1Ph) (Helical) S (5HP, 3Ph) Infeed Table Travel 3/4 Cutterhead Speed 6000 RPM Rabbeting Capacity 3/4 Dust Port Diameter 6 Table Dimensions 88 L x 12-1/8 W Table Height 34 Fence Dimensions 60-1/4 L x 5-3/8 W Fence Tilts 135, 90 & 45 Positive Stops 90 and 45 Footprint - Base 21-1/2 x 50-1/2 Footprint - with Table 88 x 50-1/2 Motor (1Ph) 3HP, 220V Motor (3Ph) 5HP, 220V/440V* Prewired 220V (11.6 Amps 220V, 5.8 Amps 440V) Overall Dimensions 88 L x 40 W x 41 H 1,020 lbs *Optional 440/460 volt available special order only. Additional cost/parts may apply. FENCE Rack & pinion fence allows for quick & precise adjustments. 11 STANDARD helical cutterhead with GERMAN CARBIDE inserts is included with jointer. LARGE HAND WHEEL FOR EASY DEPTH ADJUSTMENTS Extra-long precision ground tables provide a stable work surface. Fully enclosed cabinet for better dust management. Helical cutter head includes German-made carbide inserts. Carbide inserts are indexed for quick changing. Parallelogram design produces smooth accurate cuts. Front mounted hand wheels for quick precise adjustments. Extra-long precision ground fence tilts 45 degrees both directions with stops. Rack and pinion fence adjustment for quick easy set-up. High mounted controls include emergency stop. Powerful Baldor TEFC motor available in single or threephase.

14 Planer with Byrd Cutterhead SERRATED STEEL infeed roller. BUILT-IN mobile base. Model No (3HP, 1Ph, Byrd) Maximum Stock Width 15 Maximum Depth of Cut 1/8 Maximum Stock Thickness 6 Minimum Stock Thickness 1/8 Minimum Stock Length 6 Dust Port Diameter 4 Infeed Roller Diameter Feed Speeds Bed Rollers 2 Table Size Table Size w/extension Wings Table Height 30 Cutterhead Diameter 3 Cutterhead Speed Cutterhead 2 - Solid Serrated Steel 16/30 FPM 15 L x 20 W 15 L x 60 W 5,000 RPM Byrd Number of Byrd Inserts 75 Infeed Extension Table Size 20 Outfeed Extension Table Size lbs Motor (1Ph) 3HP, 1Ph 230V Only (13 AMPS) 430 lbs GENUINE BYRD cutterhead comes standard. Authentic BYRD Shelix cutter head allows smooth cuts. Carbide inserts are indexed for quick changing. Heavy cast iron construction throughout. Foldable metal extension wings with built-in rollers. Four-post design ensures head alignment regardless of stock height. Large hand wheel allows easy height adjustment. Serrated steel infeed roller provides smooth feeding. 2-speed gear box provides the perfect feed rate. Polished built-in table roller assists movement of rough stock. Table remains at the same height allowing extension support to be easily added. Top mounted motor includes magnetic controls for added safety. Built-in casters with locks for easy mobility. 4 dust chute easily handles chip removal. Matched 3 V-belt drive smoothly transfers power to drive train and cutter head. Powerful TEFC 3HP single-phase motor. CSA listed. 12

15 Planer with Helical Cutterhead MASSIVE CAST IRON extension wings to support heavy stock. DIGITAL READOUT takes the guess work out of thickness settings. HELICAL CUTTERHEAD with 4-sided carbide inserts eliminates tear-out and runs quiet. SERRATED STEEL Infeed roller. Helical cutter head includes German-made carbide inserts. Carbide inserts are indexed for quick changing. Heavy cast iron construction including extension wings support heavy stock. Table and extension wings are precision ground allowing smooth operation. Top rollers allow easy return of stock. Four-post design ensures table alignment regardless Feed Speeds of stock height. Bed Rollers Large hand wheel allows easy height adjustment. Serrated steel infeed roller provides smooth feeding. 2-speed gear box provides the perfect feed rate. Polished built-in table roller assists movement of rough stock. Magnetic controls for safer operation. Digital readout allows precise thickness settings. Built-in casters with locks for easy mobility. Table Support 4 dust chute easily handles chip removal. Motor (1Ph) Matched 3 V-belt drive smoothly transfers power to drive train and cutter head. Powerful TEFC motor available in single or threephase. 13 Model No (5HP, 1Ph, Helical) Maximum Stock Width 16 Maximum Depth of Cut 1/8 Maximum Stock Thickness 6 Minimum Stock Thickness 1/8 Minimum Stock Length 6 Dust Port Diameter 4 Infeed Roller Diameter 3 16/20 FPM 2, Adjustable Table Size 16 L x 20 W Table Size w/extension Wings 16 L x 44 W Cutterhead Diameter 2-7/8 Cutterhead Speed Number of Knives 90 4,800 RPM Footprint - Base 24 x 21 Footprint - with Table 30 x 44 2-Column 5HP, 220V Only (25 AMPS) Overall Dimensions 45 x 35 x lbs

16 Planer EASY ACCESS TO CUTTERHEAD keeps maintenance time to a minimum. POWERFUL 7.5HP MOTOR & OIL GEARBOX WITH 2 SPEED is easy to access. Model No (7.5HP, 1Ph, Straight) (10HP, 3Ph, Straight) (7.5HP, 1Ph, 30mm) (10HP, 3Ph, 30mm) (7.5HP, 1Ph, Byrd) (10HP, 3Ph, Byrd) Maximum Stock Width 22 Maximum Stock Thickness S S B B Minimum Stock Thickness 1/8 Minimum Stock Length 10 Dust Port Diameter 5 Minimum CFM Required Infeed Roller Diameter CFM Outfeed Roller Diameter 3-5/16 Feed Speeds Bed Rollers Table Size 20 and 30 FPM 2, Adjustable 32-1/4 L x 23-3/4 W Footprint 44 L x 22 W Overall Dimensions 45 W x 32 D x 50 H Cutterhead Diameter 3 Number of Knives (straight) 4 Number of Knives (helical) Cutterhead Speed Table Support Motor (1Ph) Motor (3Ph) 90 (30mm) 110 (Byrd) 5,000 RPM 2-Column 7.5HP, 220V Only 10HP, 240V/440V*, Prewired 220V (26/13 AMPS) 1,568 lbs GENUINE BYRD TOOL cutterhead also available. Available with three styles of a cutter head, straight, helical, or authentic BYRD. BYRD Shelix and helical carbide inserts are indexed for quick changing. Massive cast iron construction throughout. Polished built-in table roller assists movement of rough stock. Segmented infeed roller and sectional chip breaker easily handle rough stock. 2-speed gear box provides the perfect feed rate. Magnetic controls with emergency off switch for safer operation. Digital readout allows precise thickness settings. Hinged access to cutter head and feed rollers for quick set-up. Easy access to motor, drive train, and gearbox assist in maintenance and adjustment. 5 dust chute easily handles chip removal. 3 V-belt drive smoothly transfers power to drive train and cutter head. Powerful TEFC motor available in single or threephase. *Optional 440/460 volt available special order only. Additional cost/parts may apply. 14

17 Planer POWERFUL MOTOR and 3-speed oil bath gear box is easily accessible DIGITAL THICKNESS CONTROL & EASY BED ROLLER ADJUSTMENT make for quick adjustments and setup. Model No (10HP, 1Ph, Straight) (15HP, 3Ph, Straight) (10HP, 1Ph, Helical) S (15HP, 3Ph, Helical) S (10HP, 1Ph, Byrd) B (15HP, 3Ph, Byrd) B Maximum Stock Width 25 Maximum Stock Thickness 9-1/4 Minimum Stock Thickness 1/8 Manual 15/64 Automatic Minimum Stock Length 10 Dust Port Diameter 5 Minimum CFM Required 900 CFM Infeed Roller Diameter 3 Steel Outfeed Roller Diameter 3 (x2) Feed Speeds 20, 25 and 30 FPM Bed Rollers 2, Adjustable Table Size 32 L x 26 W Footprint 47-1/2 L x 21 W Cutterhead Diameter 3-3/8 Number of Knives (Straight) 4 Number of Knives (Byrd) 125 Byrd Number of Knives (Helical) 174 (4-Side) 102 (30mm) Cutterhead Speed 4,800 RPM Table Support 2-Column Motor (1Ph) 10HP, 240V Only (43 AMPS) Motor (3Ph) 15HP, 240V/440V* Prewired 220V (22 AMPS) 1,837 lbs Overall Dimensions 46 L x 23 W x 56 H HELICAL CUTTERHEAD Long lasting four sided solid carbide knives greatly reduce cutterhead noise. SECTIONAL INFEED ROLLER/CHIP BREAKER, THREE FEED ROLLERS AND TWIN BED ROLLERS make sure your stock feeds accurately and comes out true, no matter what kind of stock you are running. Available with three styles of a cutter head, straight, helical, or authentic BYRD. Helical carbide inserts are indexed for quick changing. Massive cast iron construction throughout allows up to a 1/4 cut. Polished built-in table roller assists movement of rough stock. Segmented infeed roller and sectional chip breaker easily handle rough stock. Dual outfeed rollers assist with heavy stock. 3-speed gear box provides the perfect feed rate. Magnetic controls with emergency off switch for safer operation. Control panel with digital readout allows precise thickness settings. Power assisted table makes for quick, accurate, adjustments. Hinged access to cutter head and feed rollers for quick set-up. 5 dust chute easily handles chip removal. Easy access to motor, drive train, and gearbox assist in maintenance and adjustment. Powerful TEFC motor available in single or three-phase. *Optional 440/460 volt available special order only. Additional cost/parts may apply. GENUINE BYRD TOOL cutterhead also available. 15

18 4620, 4630 & , 18 & 22 Band Saws Steel frame design provides ridged, stable support. Large cutting capacity allows many operations including resaw. Massive trunnion support holds the table in place. Large cast iron precision ground table provides a solid work surface. Balanced cast-iron wheels with rubber tire helps keep vibration at a minimum and 4650 feature a cast iron base giving a steady platform to work and 4630 feature micro-adjust ball bearing blade guides are easy to adjust features anodized aluminum bracket with Bakelite and ball bearing blade support. Easy to use blade tracking adjustments. Rack and pinion upper blade guide adjustment for quick setup and 4630 include 3 blade speeds for more cutting options and 4630 feature a quick release blade tensioning allowing quick set-up and longer blade life. All models include a rip fence as standard equipment as an added value includes a foot brake for added convenience. Controls include an emergency off switch for safer operation and 4650 feature magnetic controls features a TEFC 1.5 HP single phase motor and 4650 features powerful TEFC motor available in single or three-phase. Model No (1.5HP, 1Ph) (2HP, 1Ph) (2HP, 3Ph) (5HP, 1Ph) (5HP, 3Ph) Blade Speed FPM 1,480/2,300/3,240 1,480/2,300/3,240 4,900 Wheel Diameter Table Dimension 16 W x 20 L 18 W x 18 L 30-1/4 W x 23 L Throat Distance 13-5/8 17-1/2 21-1/2 Max. Stock Height Blade Length Blade width Cap. 1/4 to 1 1/4 to 1-1/4 1/4 to 1-1/4 Table Height at /2 37 Table Tilt Limits -10 to to 45 0 to 45 Dust Port Motor (1Ph) 1.5HP, 110/220V 2HP, 220V Only 5HP, 220V Only Motor (3Ph) N/A 2HP, 220V Only 5HP, 220V Only 305 lbs 500 lbs 1,054 lbs BLADE GUIDES anodized aluminum blade guides support both bakelite & roller bearings for extra blade support. BALANCED CAST IRON WHEELS WITH RUBBER TIRES keep vibration to a minimum as they guide and propel the blade *Optional 440/460 volt available special order only. Additional cost/parts may apply. 16

19 4640 & & 24 Band Saws THE FULLY ADJUSTABLE blade guide system provides consistent and accurate support. Two bearings on either side of the blade encompass the entire blade width to ensure no wandering. As well, the back-up thrust bearing not only prevents the blade from pushing back but it is grooved thereby allowing the back of the blade to be supported on all three sides. Massive steel frame design provides ridged, stable support. Large cutting capacity allows many operations including resaw. Massive trunnion support holds the table in place. Large cast iron precision ground table provides a solid work surface. Balanced cast-iron wheels with rubber tire helps keep vibration at a minimum. Micro-adjust ball bearing blade guides are easy to use. Easy to use blade tracking adjustments including a viewing window. Rack and pinion upper blade guide adjustment for quick set-up. Table tilts 45 degrees by means of an easy to use hand wheel. Extra-large fence side plate can be used in the vertical or horizontal position. Heavy-duty miter gauge is included as an added value. A foot brake is featured for added convenience. Magnetic controls for safer operation. Two blade speeds gives more cutting options. Dual dust chutes allow efficient collection. Powerful TEFC motor available in single or three-phase. Model No (3HP, 1Ph) (5HP, 1Ph) Cutting Capacity Height Cutting Capacity Width (5HP, 3Ph) (7.5HP, 3Ph) Min. Blade Width 1/8 1/8 Max. Blade Width 1-1/2 1-1/2 Blade Speed 2,000/4,000 FPM 2,000/4,000 FPM Blade Length Table Dimension 24 x x 24 Table Tilt 45 Right to 10 Left 45 Right to 10 Left Table Height Wheel Diameter 20-1/2 24-1/2 Dust Chute 4 x 2 Pieces 4 x 2 Pieces Base Dimensions 33-3/4 x /4 x 24 Motor Speed 1,725 RPM 1,725 RPM Motor (1Ph) 3HP, 220V Only 5HP, 220V Only Motor (3Ph) 5HP, 220V/440V Prewired 220V 869 lbs 975 lbs 7.5HP, 220V/440V Prewired 220V 17 *Optional 440/460 volt available special order only. Additional cost/parts may apply. THE TABLE CAN BE quickly and easily adjusted to any angle through the use of a handwheel. A convenient, easy to read angle gage displays the correct angle. An adjustable stop allows the table to be returned to 90 degrees without measuring.

20 4680 & 4685 Horizontal Band ReSaw 4685: Band wheels are machined from solid steel and precision balanced afterwards. Driven by a 30HP motor the momentum created by the solid steel wheels allows for the cleanest cut with no bogging down on even the hardest of materials : The massive solid steel saw wheels are precision balanced to eliminate vibration. The saw wheels are designed heavy to increase momentum and allow clean cuts for even the toughest conditions. Model No (20HP, 3Ph) (30HP, 3Ph) Max. Workpiece Size 12 x x 9.5 Distance Blade to 7/64-5 5/32-12 Conveyor Table Conveyor Belt Size 11-1/4 x 215-3/4 15-1/4 x 215-3/4 Saw Wheel Diameter Ø 28 x 1 W Ø 28 x 1 W Feed Rate 16~92 FPM 13~82 FPM Saw Blade Size 168 x x 1 Saw Wheel Motor 20HP, 3Ph 220/440V* Prewired 220V 30HP, 3Ph 220/440V* Prewired 220V Hydraulic Motor 3HP 3HP Elevation Motor 1/4HP 1/4HP Dust Hood Diameter Ø 4 x 3 Pieces Ø 4 x 2 Pieces Weight 2,200 lbs 3,748 lbs *Optional 440/460 volt available special order only. Additional cost/parts may apply Heavy steel frame construction throughout provides optimum performance. Solid steel wheels are precision balanced for smooth operation. Multiple dust ports for efficient dust management. Convenient mounted control panel provides easy set-up and adjustment. Digital readout quickly controls the thickness adjustment. Variable feed rate speed is controlled by a hydraulic drive system. Automatic blade tension allows a quicker set-up and correct tension during operation. Fully adjustable oil mist system keeps the blade cool for longer life. Multiple pressure rollers provide safe steady cutting. Extra-long infeed conveyor provides more support of stock includes a head elevation motor for quick adjustment features steel blade guides, 4685 features ceramic blade guides. Magnetic controls for safer operation. Powerful TEFC main, hydraulic, and elevation three phase motors.

21 4705 Shaper MICRO-ADJUSTABLE FENCE WITH FULL SAFETY FEATURES AN INNOVATIVE dovetail system raises and lowers the quill assembly ensuring accuracy and longevity. THE THREE INCLUDED TABLE inserts allowing for various cutter diameters. Model 4705 (5HP, 1Ph) (7.5HP, 3Ph) Table Dimensions Table Height 36-1/2 39 L x 31-1/2 W T-Slot 3/4 x 3/8 Vertical Spindle Travel 4 Spindle Direction Spindle Speed Maximum Tool Diameter Spindle Diameter Dust Port Diameter 4 Minimum CFM 800 Footprint Motor (1Ph) Motor(3Ph) Reversible 5,000, 7,000, 10,000 RPM 7 Below Table, 8 Above Table 1-1/4 and 3/4 Interchangeable 28-1/2 L x 24-3/4 W 5HP, 220V only 7.5HP, 220/440V*, Prewired 220V Machine Dimensions 39 L x 31 W x 45 H ERGONOMIC CONTROL PANEL includes a digital readout with set table reference point for spindle height. 870 lbs *Optional 440/460 volt available special order only. Additional cost/parts may apply. 19 Massive cast iron precision ground table provides a solid work surface. Cast iron base provides a steady platform. 3/4 and 1-1/4 interchangeable spindles are included for added versatility. Three spindle speeds allow more choices to produce a better finish. Reversing spindle gives more options for each set-up. Innovative dovetail design accurately raises and lowers the spindle. Fence is independent and features micro adjustments for quick set-up. Top mounted control panel includes a digital readout for spindle height. Large hand wheel for quick spindle height adjustment. Mitre gauge included. Magnetic controls with emergency off switch for safer operation. Powerful TEFC motor available in single or three-phase.

22 4920 Straight Line Rip Saw Heavy cast-iron construction provides a solid work station. Precision ground cast iron fence with micro adjust for easy adjustment. Blade arbor is heat treated and precision ground for accurate cuts. Conveniently located central controls allow quick set-up and adjustment. Variable feed rate for better control of the work piece. Feed chain blocks are heat treated and precision ground. Conveyor chain features an auto-oiler for longer life. Large hand wheel provides easy blade adjustment. Seven pressure rollers and two antikickback mechanisms for safer operation. Built-in 4 dust port allows efficient dust management. Optional laser guide available allowing very precision work. Magnetic controls for safer operation. Powerful three phase 15HP TEFC main and 2HP TEFC feed motor. Model No (15HP, 3Ph) Arbor Diameter 1 Blade Diameter 12 Blade Speed 4,500 RPM Feed Speed FPM Variable Max Cutting Depth 3-3/8 Minimum Board Length 8 Maximum Ripping Width 18 Pressure Rollers 7 Anti-Kickback Devices 2 Table Size 35 W x 54-1/4 L Table Height 32 Dust Collection Port 4 Minimum CFM Required 600 CFM Feed Motor 2HP, 3Ph 230/460V Control Soft Start Motor(3Ph) 15HP, 3Ph 230/460V* Prewired 230 Overall Dimensions 61 L x 45 W x 64 H 2,290 lbs OPTIONAL laser attachment. PRECISION MACHINED CAST- IRON MICRO ADJUSTABLE FENCE is quick and easy to adjust and guides the stock securely. SEVEN PRESSURE ROLLERS hold material securely to the conveyor chain. TWO SETS OF anti-kickback fingers ensure operator protection and safety. *Optional 440/460 volt available special order only. Additional cost/parts may apply. 20

23 4930 Multiple Blade Rip Saw Heavy cast-iron construction provides a solid working surface. Precision ground cast iron fence with micro adjust for easy adjustment. Blade arbor is heat treated and precision ground for accurate cuts. Conveniently located central controls allow quick set-up and adjustment. Variable feed rate for better control of the work piece. Conveyor system features an adjustable auto-oiler for longer life. Four solid steel pressure rollers with upper and lower anti-kickback mechanisms for safer operation. Includes laser guide allowing very precision work. Short stock cutting device includes for added versatility Magnetic controls for safer operation. Powerful three phase 50HP TEFC main and 2HP TEFC feed motor. Model No (15HP, 3Ph) Max. Cutting Thickness 4-3/4 Max. Cutting Thickness (w/short Stock Device) 3-3/4 Max. Cutting Width 12 Distance from Column to Link 14 Chain Center Min. Working Length 20 Min. Working Length 12 (w/short Stock Device) Max. Sawblade Diameter 14 Min. Sawblade Diameter 10 Sawblade Bore 70 mm Saw Arbor Diameter 50 mm Saw Arbor Speed 3,800 RPM Saw Arbor Motor 50 HP, 3Ph 220/440V* Variable Feed Speed 24 ~ 98 /Min. Variable Feed Speed (for Electrical 8 ~ 79 /Min. Amp Display) Feed Motor 2 HP Hold Down Roller Elevating Motor.5 HP Table Area 60 x 30 Packing Dimensions 74 x 67 x 67 Net Weight 4,510 lbs. 5,060 lbs. *Optional 440/460 volt available special order only. Additional cost/parts may apply. ADJUSTABLE AUTO-LUBE provides constant oil to rails and chain. Low level light and stop feature prevents wear and damage. CONTROL PANEL INCLUDED AMPERAGE display and overload protection. Feed rate will automatically be reduced if rating is exceeding. THE NICKEL CHROME STEEL SAW ARBOR uses a quick change 70mm saw sleeve with double keyways. This set-up allows for multiple set-ups and quick changeovers if additional sleeves are purchased. 21

24 Cutoff Saw EASY ACCESS for blade removal. OPTIONAL ACCESSORIES 1. Optional 3 infeed and 3 outfeed roller conveyors are equipped with a graduated gauge bar with a swing stop for identical length of cut. 2. Optional dual palm switch ensures the safe operation that will shut off the machine in 0.1 second Model No (7-1/2HP, 3Ph) Arbor Speed 4,100 RPM Arbor Size 1 Blade Size 14 Cutting Capacity (Thickness x Width) 1 x 10, 2 x 9, 3 x 8 Cycle Operation Air Table Size 25 x 23-1/4 Maximum Cycles Per Minute 95 Dust Port 4 Minimum Dust Removal 600 CFM Main Motor(3Ph) 7.5 HP, 3Ph 220/440V* Prewired 220V 530 lbs 640 lbs (Roller Table Set Infeed/Outfeed) Overall Dimensions 31 L x 30 W x 51 H *Optional 440/460 volt available special order only. Additional cost/parts may apply. Up-cut saw design provides fast and accurate cuts. Fast cut rate allows up to 95 strokes per minute. Stroke speed adjustable to fit your cutting requirements. Large precision ground table and heavy gauge cabinet provide a stable work surface. Precision ground arbor is supported by high quality bearings. Conveniently positioned foot-switch allows handsfree operation. Easy cabinet access for adjustments and quick blade changing. Saw blade included. High quality blade included as an added value. Built-in 4 dust port allows efficient dust management. Magnetic controls for safer operation. Powerful TEFC motor available in three-phase. Optional in feed and out feed tables with stops and optional dual palm switch complete the high production package. 22

25 Cutoff Saw Left model, feeds right to left. Up-cut saw design provides fast and accurate cuts. Fast cut rate allows up to 60 strokes per minute. Stroke speed adjustable to fit your cutting requirements. Quick adjusting workpiece clamp adds to your productivity. Large precision ground table and heavy gauge cabinet provide a stable work surface. Cast iron precision ground fence allows for a quick and accurate set up. Precision ground arbor is supported by high quality bearings. Conveniently positioned foot-switch allows hands-free operation. Full coverage guard includes an automatic kill switch for safety. Easy cabinet access for adjustments and quick blade changing. Saw blade included. High quality blade included as an added value. Built-in 4 dust port allows efficient dust management. Magnetic controls for safer operation. Powerful TEFC motor available in single or three-phase. Optional in feed and out feed tables with adjustable stops. Model No (7-1/2HP, 1Ph) (7-1/2HP, 3Ph) (10HP, 3Ph) Arbor Speed Arbor Size 1 Blade Size RPM Cutting Capacity at Maximum Height 4-1/4 x 9-3/4 Cutting Capacity Width 1 x 13-3/8 Table Size 26-1/4 x 27-1/2 Table Height 32-3/4 Air Supply Required Maximum Cycles Per Minute 60 Dust Port 4 Minimum Dust Removal 15 / 70 (CFM/PSI) 600 CFM Main Motor(1Ph) 7-1/2HP, 220V Only (37.5 AMPS) Main Motor(3Ph) 7-1/2HP, 220/440V* Prewired 220V Main Motor(3Ph) 10HP, 220/440V* Prewired 220V 800 lbs 200 lbs (Roller Table Set Infeed/Outfeed) Overall Dimensions 30 L x 32 W x 44 H *Optional 440/460 volt available special order only. Additional cost/parts may apply. OPTIONAL ROLLER TABLES WITH ADJUSTABLE STOPS make repetitive cuts quick and accurate. 23 CUTTING CAPACITY SHOWN WITH optional 6 roller table assembly. FULL COVERAGE GUARDS help keep workers safe and productivity high. 4 DUST PORT AND PNEUMATIC FOOT PEDAL allow for efficient dust collection and quick cutting. RIGHT-HAND MODEL 5035 (feeds left to right) not pictured, available on special order only.

26 Automatic Cutoff Saw Ideal for finger jointing and other high production applications. Fully automatic with an industrial grade 32-bit floating point DSP system computer that features flash and battery back-up. Superior to conventional PC based controls as it eliminates down time and damage due to unstable voltage, high temperatures, sawdust, and other poor environmental conditions. Touch screen panel makes programming quick and easy. Comprehensive safety guards with interlocks allow maximum protection for the operator. Four different cut modes allow defect cutting as well as fixed length cuts or a combination of both. Cutting rate can be set up to 80 cuts per minute. Variable feed rate with a maximum speed of 240 feet per minute. Highly accurate Servo drive system produces cuts ±1mm. Unique defect blowing system is logically controlled for time and length of cut. This feature provides efficient defect removal avoiding the defect from hitting the blade reducing damage and down time. Built-in 4 dust ports (2) allows efficient dust management. Magnetic controls for safer operation and motor protection. Powerful three phase 10HP TEFC blade and 2HP TEFC feed motor. Model No (10HP, 3Ph) Saw Motor 10HP, 3Ph 220/440V Prewired 220V Feed Motor 2HP Saw Spindle Speed 3,200 RPM Max. Feed Speed Variable to 240 Ft/Min Circular Saw Diameter 18 Saw Spindle Diameter 30mm Height of Bed 35.5 Minimum Distance of Marks 20mm Minimum Cutting Size 12 x 2.5 x.4 Minimum Cutting Length 6 Dust Outlet 2 x 4 Air Pressure for Machine PSI Air Pressure for Defect Blowing System 100~128 PSI Machine Net Weight 1,980 lbs. 2,204 lbs Overall Dimensions 30 L x 32 W x 44 H Four Cut Modes: 1. Defect cutting by chalk mark 2. Fixed cut to length 3. Cut list (10 sets) 4. Defect and fixed cut to length 5. Defect and fixed cut to length without loss (perfect for finger joint operations) *Optional 440/460 volt available special order only. Additional cost/parts may apply. POWERFUL FEED ROLLERS assure a constant feed rate. HEAVY DUTY AND high precision arbor. 24 SAFETY INTERLOCK.

27 Spindle Single Unit Line Boring Large table provides an excellent work surface. Can be used in the horizontal or vertical position. Quick connect drill chucks assist in quick tool changes. 3M rule gauge with 4-adjustable stops is included. Two guide pins are provided for repetitive operations. Mechanical DRO for precise boring head adjustment. Central control panel allows quicker operation. Convenient foot pedal controls the entire boring cycle. Adjustable drilling depth includes 6-positions for added convenience. Drill speed stabilizer allows smooth initial contact for a better finish. Powerful 2.5HP single phase motor. STEEL GEARS IN an aluminum housing provide longer life. Quick change chucks allow easy bit change. Model No Table Size 34-1/4 x 19-1/4 Max. Drilling Depth 3 Spindle Speed 2800 RPM Distance Between Center 32mm Compress Air Required 6-8 kg/cm2 Number of Spindles Per Boring Head 21 Quick Chuck 21 Pieces Boring Head Adjustment 0-90 O Motors 2.5 HP, 1 Ph 950 lbs Overall Dimensions 30 L x 32 W x 48 H ACCURATE ADJUSTMENT OF BORING UNIT and speed stabilizer provides smooth feeding against the workpiece. THE BORING UNIT CAN be adjusted from horizontal to vertical drilling by pneumatic setting. 25

28 Spindle Line Boring A MASSIVE AIR cylinder easily provides the drilling force needed for the 21 spindle gear head. TWO GUIDE PINS are mounted into the boring head for repetitive operation. TWO SPRING LOADED pressure feet keep the material firmly planted throughout the drilling operation. Large table provides an excellent work surface. Durable phenolic table prevents scratching of the work surface. Large air cylinder provides ample force for all boring needs. Quick connect drill chucks assist in quick tool changes. Convenient foot pedal controls the entire boring cycle. Spring loaded pressure feet securely clamps the work piece is place. Two guide pins are provided for repetitive operations. Mechanical DRO for precise boring head adjustment. Rear fence includes multiple stops for quick set-up. Powerful 2.5HP single phase motor. Model No (2 HP, 1 Ph) Table Size 19 x 47-1/4 Max. Drilling Depth 3 Max. Distance Between Center 32mm Compress Air Required PSI Number of Spindles Per Boring Head 21 Quick Chuck 21 Pieces Motors 2.5 HP, 1 Ph (9 AMPS) Footprint 34-1/2 L x 25 W 440 lbs Overall Dimensions 88 L x 52 W x 62 H OPTIONAL REAR FENCE extended for added capacity. 26

29 Spindle Twin Line Boring ACTUATING VALVES are operated by the foot pedal to engage the clamping system and begin drilling. EACH HEAD IS AFFIXED with a six position adjustable boring depth selector. Simply rotate the device to the desired setting in seconds. A SPEED STABILIZER has been added to offer smooth drilling into the workpiece. A TOTAL OF SIX wide stance hold down cylinders are non-marring and automatically conform to the work surface. Model No (2.5 HP x 2, 3 Ph) Table Size x Max. Drilling Depth 2-3/4 Max. Distance Between Center 1-1/4 Number of Spindles Per Boring Head Number of Clamps 3 (x2) Quick Chuck 50 Pieces Distance Between Boring Head 6-1/4 to 24-1/2 Motors 2.5 HP (x2), 3 Ph 1,433 lbs Overall Dimensions 53 L x 47-1/4 W x 51 H Two rows of 25-spindle vertical boring bits provide high production capacity. Quick connect drill chucks assist in quick tool changes. 3M rule gauge with 4-adjustable stops is included. Two guide pins are provided for repetitive operations. Mechanical DRO for precise boring head adjustment. Central control panel allows quicker operation. Convenient foot pedal controls the entire boring cycle. Adjustable drilling depth includes 6-positions for added convenience. Drill speed stabilizer allows smooth initial contact for a better finish. Powerful 2.5HP single phase motor. 27

30 Jointer-Planer Heavy cast-iron and steel construction allow heavy consistent cuts. Twin 25HP TEFC motors independently power the large cutter heads. 5HP TEFC feed motor easily handles heavy stock during each pass. Universal joint drive delivers smooth powerful stock feeding. Matched 6 V-belt drive smoothly transfers power to the cutter heads. Central control panel allows quicker set up and operation. Digital thickness control assist in producing outstanding results. Variable speed control provides a feed rate up to 90 feet per minute. Segmented feed fingers move up to 3/4 and are adjustable Helical heads are easy to access for quicker maintenance. Each cutter head features 105 inserts for rapid smooth stock removal. Fine adjustment of Infeed table is easily done with a large hand wheel. Magnetic controls for safer operation. Special order 4-sided insert cutter head available Model No Maximum Stock Width 24 Maximum Stock Thickness 8 Minimum Stock Length 12 Minimum Stock Thickness 1/4 Feed Speed Number of Knives Per Cutter Head Knife Size (2-Sided) Knife Size (4-Sided) Cutterhead Diameter 5.3 Cutterhead Speed 20 ~ 90 FPM 105 (2-side) 180 ( 4-side) 30mm x 12mm x 2.5mm 15mm x 15mm x 2.5mm 4,600 RPM CFM 4,200 Table Surface Dust Port Diameter 6 Motor (Bottom Cutterhead) Motor (Top Cutterhead) Motor (Feed) Motor (Table Elevation) Overall Dimensions *Optional 440/460 volt available special order only. Additional cost/parts may apply. Hardened Chrome 25HP, 3Ph, 220V/440V* Prewired 220V 25HP, 3Ph, 220V/440V* Prewired 220V 7.5HP, 3Ph, 220V/440V* Prewired 220V 1HP, 3Ph, 220V/440V* Prewired 220V 115 L x 75 W x 77 H 9,700 lbs 28 LARGE DIAMETER HELICAL CUTTERHEADS house the carbide inserts. Each cutterhead holds 105 knives. The helical cutterheads aggressively remove material while at the same time run quiet and provide a good finish even on figured woods. The bottom cutterhead as shown here, can be slid out of the machine and laid back on a perch for easy knife changes. LARGE HORSEPOWER motors drive the helical cutterheads via a 6 V-belt pulley drive system. THE CARPET FEED, top feed rollers, and table feed rollers are all sequentially driven through a universal joint drive system. The advantage of this over a chain drive system is very positive feeding.

31 5355 & & 37 Single-Head Wide Belt Sanders 75 belts give you longer life and less loading. Central control panel feature digital control for accurate stock height and removal. Heavy precision ground table gives a solid working surface. Power table height adjustment provides for a quick set-up. Variable speed feed motor allows precise adjustment for optimum results. Four post lift design assures accurate consistent results. Oscillating belt is controlled by an air sensor to prevent sanding lines. Platens are fully adjustable and can be removed. Multiple dust ports for efficient dust management. Independent motors run the sanding belt, feed conveyor, and table elevation for maximum power to each operation. Model No (15HP, 3Ph) Maximum Stock Width Maximum Stock Thickness 5 5 Minimum Stock Thickness 1/8 1/8 Air Requirements 80 PSI 80 PSI Exhaust Value Required 800 CFM 1,600 CFM Dust Port 5 (x2) 5 (x3) Abrasive Belt Dimensions 25 W x 75 L 37 W x 75 L Main Motor 15HP, 3Ph, 220/440V* Prewired 220V (36.7 AMPS) DIGITAL CONTROLS allow for accurate and quick thickness settings. 20HP, 3Ph, 220/440V* Prewired 220V Conveyor Motor 1HP, 3Ph 220/440V Prewired 220V 1HP, 3Ph 220/440V Prewired 220V Table Raising Motor 1/4HP 1/4HP 1,985 lbs 2,425 lbs Overall Dimensions 53 L x 46 W x 85 H 53 L x 58 W x 85 H POWERFUL VARIABLE speed drive with reduction gear box. FOUR ELEVATING SCREWS eliminate table pivoting and ensure accuracy. *Optional 440/460 volt available special order only. Additional cost/parts may apply. 29

32 5360, 5390 & , 37 & 43 Double-Head Wide Belt Sanders DOUBLE HEAD design. 75 belts give you longer life and less loading. Double head design allows removal and finish sanding in a single pass. Belt tracking is controlled by photo sensors for superior performance. Central control panel feature digital control for accurate stock height and removal. Heavy precision ground table gives a solid working surface. Power table height adjustment provides for a quick set-up. Variable speed feed motor allows precise adjustment for optimum results. Four post lift design assures accurate consistent results. Oscillating belt is controlled by an air sensor to prevent sanding lines. Platen is fully adjustable. Multiple dust ports for efficient dust management. Independent motors run the sanding belt, feed conveyor, and table elevation for maximum power to each operation. Model No (15HP, 3Ph) (20HP, 3Ph) (25HP, 3Ph) Maximum Stock Width Maximum Stock Thickness Minimum Stock Thickness 1/8 1/8 1/8 Air Requirements 80 PSI 80 PSI 80 PSI Dust Port Diameter 5 (x4) 5 (x6) 5 (x8) Exhaust Value Required 800 CFM 1,600 CFM 1,900 CFM Abrasive Belt Dimensions 25 W x 75 L 37 W x 75 L x 43 W x 75 L Feed Speed Variable, FPM Variable, FPM Variable, FPM Main Motor 15HP, 3Ph, 220/440V* Prewired 220V Conveyor Motor 1HP, 3Ph 220/440V Prewired 220V 30 20HP, 3Ph, 220/440V* Prewired 220V 1HP, 3Ph 220/440V Prewired 220V 25HP, 3Ph, 220/440V* Prewired 220V 1HP, 3Ph 220/440V Prewired 220V Table Height Motor/Digital Readout 1/4HP 1/4HP 1/4HP 2,755 lbs 3,637 lbs 4,078 lbs Overall Dimensions 63 L x 45.5 W x 86.5 H 52 L x 80 W x 75 H 63 L x 65 W x 86.5 H *Optional 440/460 volt available special order only. Additional cost/parts may apply.

33 5392 & & 43 Double-Head Wide Belt Sanders 75 belts give you longer life and less loading. Double head design allows removal and finish sanding in a single pass. Belt tracking is controlled by photo sensors for superior performance. Central control panel feature digital control for accurate stock height and removal. Heavy precision ground table gives a solid working surface. Power table height adjustment provides for a quick set-up. Variable speed feed motor allows precise adjustment for optimum results. Four post lift design assures accurate consistent results. Oscillating belt is controlled by an air sensor to prevent sanding lines. Platens are fully adjustable and can be removed. Multiple dust ports for efficient dust management. Independent motors run the sanding belt, feed conveyor, and table elevation for maximum power to each operation. BACK VIEW DIGITAL CONTROLS allow for accurate and quick thickness settings. Model No (20/15HP, 3Ph) (30/20HP, 3Ph) Maximum Stock Width Maximum Stock Thickness 6 6 Minimum Stock Thickness 1/8 1/8 Table Height 37-1/2 37-1/2 Brush Roller Motor (One Set) 1/2HP 1HP Dust Ports 5 x 2 5 x 2 Air Requirements 80 PSI 80 PSI Abrasive Belt Dimensions 36 W x 75 L 43 W x 75 L Main Motor (x2) 20HP/15HP, 3Ph, 220/440V * Prewired 220V Conveyor Motor 2HP, 3Ph 220/440V Prewired 220V Table Height Motor/Digital Readout 1/2HP 1/2HP Net Weight 5,732 lbs 6,614 lbs *Optional 440/460 volt available special order only. Additional cost/parts may apply HP/20HP, 3Ph, 220/440V* Prewired 220V 3HP, 3Ph 220/440V Prewired 220V HEAVY DUTY double head design.

34 Double-Head Wide Belt Sander DOUBLE HEAD DESIGN with photocell sensors. Easy to access the electrical components. Model No (40/30HP, 3Ph) Maximum Stock Width 52 Maximum Stock Thickness 5 Minimum Board Length 12 Minimum Stock Thickness 1/8 Air Requirements 90 PSI (0.35 M 3 /min) Dust Port Diameter 6 x x 2 (Panel Cleaning Brush Roller) Exhaust Value Required 5,360 CFM (9,100 M 3 /hr) Abrasive Belt Dimensions 75 L x 52 W Feed Speed Variable, FPM Main Motor 40/30HP, 3Ph, 230/460V* Prewired 230V Conveyor Motor 5HP, 3Ph 230/460V* Prewired 230V Table Height Motor/Digital Readout 1HP, 3Ph 230/460V* Prewired 230V 6,944 lbs Overall Dimensions 96 L x 86 W x 83 H *Optional 440/460 volt available special order only. Additional cost/parts may apply. PANEL CLEANING BRUSH ROLLER A separate dust hood for panel cleaning brush allows for effective dust collection. Designed for continuous duty applications. 75 belts give you longer life and less loading. Double head design allows removal and finish sanding in a single pass. Each head is independently operated by its own heavy duty motor. Belt tracking is controlled by photo sensors for superior performance. Conveyor belt also features an automatic tracking device. Central control panel feature digital control for accurate stock height and removal. Heavy precision ground table gives a solid working surface. Power table height adjustment provides for a quick set-up. Variable speed feed motor allows precise adjustment for optimum results. Four post lift design assures accurate consistent results. Oscillating belt is controlled by an air sensor to prevent sanding lines. Platens are fully adjustable and can be removed. Multiple dust ports for efficient dust management. A panel cleaning brush is included with dedicated dust collection. Independent motors run the sanding belt, feed conveyor, and table elevation for maximum power to each operation. 32

35 6305 Tilting Edge Sander CAN BE USED in horizontal position. ADJUSTABLE END TABLE for contour applications. Can be used with the belt in the horizontal or vertical position or any angle in between. Precision ground steel platen is graphite covered to reduce heat. Cast iron table is vertically adjustable allowing full use of belt. Belt tracking and tension are easy to adjust. Full access to the belt allows quick replacement. Adjustable end table is included allowing contour sanding applications. Miter gauge is included for added value and increased versatility. Full cabinet design provides a stable work station. Built-in 4 dust port allows efficient dust management. Industrial push button controls are located for easy control. Powerful TEFC 1.5HP single phase motor. Model No Table Length 27 Table Width 10 Table Material Cast Iron Belt Size 6 x 89 Belt Speed 3,900 FPM Front Table Size 27 x 9.8 Table Tilt 90 to 180 Table Height 37-1/2-40-1/2 Dust Port Diameter 4 Overall Dimensions (L x W x H/in.) 48 x 21 x 48 Motor (1Ph) 1.5 HP, 1Ph 115/220V Prewired 115 (lbs.) 233 lbs 33

36 6310 Oscillating Edge Sander EASILY ACCESSIBLE tilt & lock adjustments. MITER GAUGE comes standard. CONVENIENT FULLY ADJUSTABLE end table for contour sanding. Graphite is on platen. Model No Table Material Cast Iron Belt Size 6 x 108 Belt Speed Oscillation 3,224 FPM 55~60 Per Min Front Table Size (Platen) 36 x 12 Table Tilt 45 Table Height 32 Dust Port Diameter 4 (x2) Overall Dimensions (L x W x H/in.) 64-1/2 x 28-1/4 x 48-1/2 Motor (1Ph) (lbs.) 2 HP, 220V, Only 527 lbs 6 x 108 belt features an oscillating action. Cast iron front table adjust to 0 to 45. Heavy cast iron end table provides a large surface for contour sanding. Both tables adjust up and down for full use of belt. Platen features a graphite pad to reduce heat and provide longer belt life. Precision machined and dynamically balanced pulleys provide smooth operation. Easy to install and adjust belt tracking. Approximate 1-1/2 oscillation provides a better finish and extends the belt life. Built in 4 exhaust ports allow efficient dust management. Magnetic controls for added safety and motor protection. Powerful TEFC 2HP single phase motor. 34

37 6505 & Single Spindle Automatic Dovetail Features fully-automatic functions to increase productivity. Central control panel features all functions and an emergency stop. Single pass or continuous operation mode available. Cast iron and steel construction provides a stable work station. High performance spindle cuts all types of wood with optimum results. Automatic lubrication function ensures long life with less maintenance. Four pneumatic clamping post will hold the work panel firmly in place. Precision carriage bearings are sealed for long trouble free operation. Three cycle rates allow precision set up to match the material. Independent micro depth adjustment is simple and produces tight fitting joints. HEAVY DUTY cylinder hold downs. Includes one 1/2 cutter top. Model No Dovetail Centers 1, 1-1/2, 2, 2-1/2 1 Minimum Workpiece 7-7/8 x 2-3/8 7-7/8 x 2-3/8 Maximum Workpiece 59 x x 17 Minimum Dovetail Height 3/16 3/16 Maximum Dovetail Height 3/4 3/4 Minimum Front Thickness 9/32 9/32 Maximum Front Thickness 2-3/8 2-3/8 Minimum Side Thickness 3/8 3/8 Maximum Side Thickness 1-3/16 1-3/16 Spindle Speed 18,500 RPM 21,500 RPM Dust Port Size 2-1/2 Front & 4 Rear 2-1/2 Front & 4 Rear Spindle Motor 1HP 1Ph, 220V Only 2HP 3Ph, 220V Only Feed Motor N/A 2HP 3Ph, 220V Only Air Pressure Required 60 PSI 71 PSI Overall Dimensions 39 L x 27 W x61 H 55 L x 35 W x 55 H 540 lbs. 1,212 lbs Single Spindle Manual Dovetail Model 6505 not pictured, special order only. Cast iron and steel construction provides a stable work station. Pneumatic clamping is easy to use for a quick set up. Spring loaded carriage assist in smooth manual operation. Visible stylus and template assist in guiding the cutter for a superior finish. High performance spindle cuts all types of wood with optimum results. Four separate centerlines 1, 1-1/2, 2, & 2-1/2 give a wide range of use. Precision carriage bearings are sealed for long trouble free operation. Magnetic controls for safer operation 35

38 6750 Disc Sander TABLE TILE IS ACHIEVED through a solid cast iron gear rack system. THE 4 STEEL COLUMN supports the sanding head over a solid cast iron base. The table height is easily adjusted through a counter balanced rack and pinion gear box. THE 20 SOLID STEEL DISC has been precision balanced and machined. Over the disk shroud swings back out of the way for quick and easy paper changes. A FOOT PEDAL IS PROVIDED Model No Table Material Cast Iron Table Size 10-1/2 x 27-1/2 Table Tilt 45 to Front 30 to Back Table Height (Floor to Top) 49 Disc Size 20 Disc Work Area 18-1/2 Dust Port Diameter (in.) 2 Overall Dimensions (L x W x H/in.) 10-1/2 x 27-1/2 x 49 Motor (1Ph) 2 HP, 1Ph Only 220V (lbs.) 463 lbs Precision balanced steel disc provides a superior finish. Heavy cast iron table is adjustable in height with rack and pinion control. Motor is reversible for more versatile applications and longer abrasive life. Foot brake provides a safe and convenient stopping feature. Rack and pinion controlled table tilts 45-degree front & 30-degree back. Disc cover swings back for easy abrasive replacement. Built-in 2 dust port allows efficient dust management. Miter gauge is included for added value and increased versatility. Heavy cast iron base and 4 steel column provides a stable work station. Magnetic controls for safer operation. Powerful TEFC 2HP single phase motor. 36

39 6910 Oscillating Spindle Sander QUICK CHANGE SPINDLES keep downtime low and productivity high. OUT OF THE WAY SPINDLE STORAGE TEFC MOTOR COUPLED WITH oil bath gear box gives perfect transmission of power to the spindle Model No Table Material Cast Iron Table Size 25-1/4 x 27-1/4 Table Tilt 0 to 45 Table Height (Floor to Top, in.) 42-1/2 Number of Table Inserts 3 Spindle Speed (RPM) 1,720 RPM Oscillation Travel (in.) 1-1/2 Oscillations Per Minute 75 Included Spindle Sizes (dia. x length, in.) 1/4 x 5 3/8 x 6 1/2 x 6 5/8 x 6 3/4 x 9 1 x 9 1-1/2 x 9 2 x 9 3 x 9 4 x 9 Dust Port Diameter (in.) 4 Oil 90 Weight Gear Oil Footprint 19-1/2 L x 18-1/2 W Overall Dimensions (L x W x H/in.) 25-1/4 x 27-1/4 x 50 Motor (1Ph) 2 HP, 1Ph 115/230V Prewired 115V Plug (16 AMPS) (lbs.) 320 lbs Precision ground table provide a stable work surface. Table tilts 45 degrees for added versatility. Unique corner cut table design allows better operator position. 1-1/2 Spindle oscillation provides greater capacity. 75-oscillations per minute lowers heat build-up providing a better finish. 10-spindle sizes are included with built-in storage for easy access. Spindles are tapered and end-threaded allowing a quick change. Three table inserts are included to match the spindle choices. Heavy-gauge steel cabinet is uniquely designed for operator convenience. Oscillation mechanism runs in an oil bath for long life. Built-in 4 dust port allows efficient dust management. Industrial push button controls are located for easy control. Powerful TEFC 2HP single phase motor 37

40 7660 Round Rod Milling Machine Highly efficient design for maximum production. Independent cutter head and feed motor provide unmatched performance with a maximum feed rate of 52 feet per minute. 4-feed rates allow greater versatility of material and applications. Feed can be reversed for quick stock removal in the case of a jam. Fully guarded hood provides a safe work station. Wide range of capacity from 3/8 to 2-3/8 with optional cutter sets. Includes 1 and 2 cutter. Built-in 4 dust port allows efficient dust management. Magnetic controls for safer operation. Powerful three phase 5HP TEFC cutter head and 2HP TEFC feed motor. THE UNITS ARE DESIGNED FOR THE PERFECT PRODUCTION of round rods from square stock. Model No Cutting Capacity 3/8-2-3/8 Cutter Set 1 & 2 Minimum Length of Stock 12 Cutterhead Drive Motor 5HP Feed Motor 2HP Cutterhead Speed 3,000 RPM Feed Speeds 20, 30, 43, 53 FPM Overall Dimensions (L x W x H/in.) 36-1/4 x 30 x 39-1/2 Main Motor 5HP, 3Ph 220V 805 lbs INCLUDES 1 & 2 cutter sets. 3/8, 3/4, 7/8, 1-1/4, 1-3/4, 2-1/4, 2-3/8 HSS Cutterheads available as optional. 38

41 9130 Through Feed End Matcher BOARDS ARE MACHINED perfectly square. Heavy steel construction allows heavy consistent cuts. Table is chrome plated to reduce wear and allow smooth material passing. Convenient PLC control features touchsensing screen. Feed rate and cutting speed can be adjusted to optimize performance. Photocell sensors control board position for superior results. Powerful 10HP motors independently run each cutter head. Cutter tips are easily and quickly changed. Length of work piece is unlimited for a wide variety of applications. Eleven-foot powered infeed and seven-foot outfeed tables included. Fully enclosed cutting area provides a safe work station. Single 6 port provides efficient dust management. Magnetic controls with emergency off switch for safer operation. Model No Width Capacity 1-1/2 ~12 Thickness Capacity 3/8 ~1-3/8 Min Wood Length 10-5/8 Max. Wood Length Unlimited Feed Speed Up to 295 FPM Cutting Speed Up to 78 FPM on 6 Board Cutterhead Motor 10HP 3Ph, 230/440V* (x2) Feed System Motor 1HP, 3Ph Cutter Drive Motor 1/2HP, 3Ph Control Voltage 24 VDC Connected Load 9.2 kw Clamping Clamp on top and side Spindle Diameter 40mm Knives TCT Disposable CFM Required 3,500 Operation Control Manual or Automatic Min. Air Requirement 12 CFM Overall Dimensions 90-1/2 L x 51-1/4 W x 63 H (lbs.) 2,535 lbs *Optional 440/460 volt available special order only. Additional cost/parts may apply. 39 A POWERED infeed roller system aids the operator in feeding timber into the machine. The steel rollers are skewed to keep the material up against the fence prior to entering the machine. A SOLID PLATE steel clamping system presses the timber flat to the table and hard up against the fence while counter rotating cutterhead machine the tongue and groove. THE INTUITIVE TOUCH SCREEN control panel is conveniently located next to the operator and allows the operator to read and adjust cut, feed and clamping parameters, view error messages, and operate the machine manually.

42 Dust Collection 7120 Portable Dust Collector 1HP Powerful TEFC 110V 1HP single phase motor. 550 CFM and high static pressure produces optimum performance. Single stage design provides efficient quiet operation. Steel impeller will give years of trouble free use. 5-micron filter bag allows superior dust collection. Includes four casters for full mobility. 4 Inlet faces down for easy hose attachment. Clear collector bag attached with steel strap for easy emptying Portable Dust Collector 3HP Powerful TEFC 3HP single phase motor. Magnetic controls for safer operation. 2,170 CFM and high static pressure produces optimum performance. Single stage design provides efficient quiet operation. Two 5-micron O filter bag allows superior dust collection. Steel impeller will give years of trouble free use. Includes four casters for full mobility. Three 4 Inlets can face up or down for easy hose attachment. Model No Motor Air Flow Static Pressure Inlet Diameter 4 Bag Diameter 14 Sound Rating (Noise@10 ft) 1HP, 1Ph - 110V 550 CFM 4.86 in. H 2 O 68 db Overall Size 30 x 15 x 73 Clear 21.5 O collector bag attached with steel strap for easy emptying. Model No Motor Air Flow Static Pressure 79 lbs 3HP, 1Ph - 220V 2,170 CFM Inlet Diameter 4 x 3 Bag Diameter 20 Sound Rating (Noise@10 ft) 8.43 in. H 2 O 70 db Overall Size 66 x 23 x lbs 7140 Dust Collector 2HP Powerful TEFC 110V 2HP single phase motor CFM and high static pressure produces optimum performance. Single stage design provides efficient quiet operation. Steel impeller will give years of trouble free use. 5-micron filter bag allows superior dust collection. Optional 1-micron canister available for even better results. Includes four casters for full mobility. Two 4 inlets for easy hose attachment. Clear collector bag attached with steel strap for easy emptying. 40 Model No Motor Air Flow Static Pressure 2HP, 1Ph 1,550 CFM 11 in. H 2 O Inlet Diameter 6 or 4 x 2 Bag Diameter 20 Sound Rating (Noise@10 ft) Overall Size db 39 x32 x lbs Optional Canister Filter Available.

43 7150 & & Stage cyclone design provides high air flow performance. Heavy duty design provides a solid stable base. Multiple 4 inlets or large single outlet for several set-up options. 5-micron filter bag allows superior dust collection (7150 & 7160) 1-micron canister provides even better results (7155 & 7165). Automatic actuator cleans the canister when system is shut-off. Quick release lever allows easy cleaning of drum. Optional remote control available for all models. Magnetic controls for safer operation & 7155 features a powerful TEFC 3HP single phase motor & 7165 features a powerful TEFC 5HP motor. Model No Motor 3HP, 1Ph 230V Only 5HP, 1Ph 230V Only Air Flow 2,000 CFM 3,500 CFM Static Pressure 13 in. H 2 O 16 in. H 2 O Inlet Diameter 8 or 4 x 3 10 or 4 x 4 Bag Diameter 19-5/8 23-5/8 Drum Capacity 60 Gallon 60 Gallon Sound Rating db db (Noise@10 ft) Overall Size 67 x45 x91 71 x51 x lbs 405 lbs UPGRADE TO A REMOTE CONTROL SYSTEM! (Available for the 7155, 7165, 7150 & 7160) Automatically turn the dust collector on or off from anywhere in the shop. HANDY SITE GLASS lets you see when the drum is getting full. Model No (1Ph) N/A (3Ph) Motor 3HP, 1Ph 230V Only 5HP, 1Ph or 3Ph 230V/440V* Air Flow 2,100 CFM 3,600 CFM Static Pressure 13 in. H 2 O 16 in. H 2 O Inlet Diameter 8 or 4 x 3 10 or 4 x 4 Bag Diameter 19-5/8 23-5/8 Drum Capacity 60 Gallon 60 Gallon Sound Rating db db (Noise@10 ft) Overall Size 67 x45 x91 71 x51 x lbs 500 lbs *Optional 440 volt available special order only. Additional cost/parts apply. QUICK RELEASE LEVER lifts the lid from the drum allowing it to be quickly rolled out and dumped. 41

44 Dust Collection 7106 Model No Motor 5HP, 3Ph 220/440V* Prewired 220V Air Speed Air Flow Inlet Diameter Bag Filter Collection Bag Overall Size Shipping Weight 5,118 FPM 3,979 CFM 12 and 5 x 5 Inlets 5 Micron x 24 Pieces Plastic x 2 Pieces 66 L x 23 W x 110 H 440 lbs Model No Motor Air Speed Air Flow Inlet Diameter Bag Filter Collection Bag Overall Size Shipping Weight 7.5HP, 3Ph 220/440V* Prewired 220V 6,496 FPM 6,021 CFM 13 and 5 x 6 Inlets 5 Micron x 36 Pieces Plastic x 3 Pieces 115 L x 39 W x 121 H 638 lbs. Powerful TEFC three phase motor. Magnetic controls for safer operation. Single stage design provides efficient quiet operation. 5-micron filter bags allow superior dust collection. Steel impeller will give years of trouble free use. Single large inlet or multiple 5 Inlets to fit your set up. Clear collector bag attached with steel strap for easy emptying. Model No Motor 10HP, 3Ph 220/440V* Prewired 220V 7110 *Optional 440/460 volt available special order only. Additional cost/parts may apply. Air Speed 6,299 FPM Air Flow 7,630 CFM Inlet Diameter 15 and 5 x 8 Inlets Bag Filter 5 Micron x 48 Pieces Collection Bag Plastic x 4 Pieces Overall Size 389 L x 39 W x 121 H Shipping Weight 990 lbs. Model No Motor 7.5HP, 3Ph 220/440V* Prewired 220V Air Speed 6,102 FPM Air Flow 4,750CFM Inlet Diameter 12 and 5 x 5 Inlets Bag Filter 5 Micron x 3 Pieces Collection Bag Plastic x 3 Pieces Overall Size 119 L x 98 W x 124 H Shipping Weight 792 lbs. 42

45 Stock Feeders Joint-Buddy Ideal for Jointers 12 & Up Designed for specific use with a jointer. Patented spiked roller grips firmly hold the work piece each pass. 4-speeds allow the optimum feed rate for each application. Uniquely designed arched support allows perfect placement of feeder. Rollers are self-adjusting for use on uneven material without adjustment. Powerful TEFC motor available in single or three-phase. Model No. APF0114 APF /4 HP 1Ph, 220V APF /4 HP 3Ph, 220V Spike Roller 4-3/4 x 11 Feed Speed 4 Speeds, 23/36/43/75 FPM Shipping Weight 96 lbs. Uni-Buddy 3 3-Roller, 8-Speed - Universal Applications Model No. Roller Feed Speed Shipping Weight APF0038 APF HP 1Ph, 220V APF HP 3Ph, 220V 4-3/4 x 2-3/8 x 3 pc 8 Speeds, 6.5/13/18/22/36/43/55/108 FPM 148 lbs. For use in a wide variety of applications including table saws and shapers. Polyurethane covered rollers provide excellent grip while protecting the work surface Eight feed speeds and choice of three or four rollers fit Uni-Buddy 4 any application. Versatile stand allows adjustment of 10 in height and 18 4-Roller, 8-Speed - Universal Applications in reach. Powerful TEFC motor available in single or three-phase. Model No. Roller Feed Speed Shipping Weight APF0048 APF HP 1Ph, 220V APF HP 3Ph, 220V 4-3/4 x 2-3/8 x 4 pc 8 Speeds, 6.5/13/18/22/36/43/55/108 FPM 158 lbs. 43

46 Stock Feeders Saw-Buddy Ideal for Table Saws Designed for specific use with a table saw. Features anti-kickback fingers for additional safety. Unique wheels are split allowing a saw blade to clear up to a height of 3. Polyurethane covered rollers provide excellent grip while protecting the work surface. Split wheels allow positioning directly above the blade for better performance. 4-speeds allow the optimum feed rate for each application. Powerful TEFC motor available in single or three-phase. Model No. Roller Feed Speed Shipping Weight APF0024 APF /2 HP 1Ph, 220V APF /2 HP 3Ph, 220V 7 x 3/4 x 3 pc 4 Speeds, 10/20/24/48 FPM 159 lbs. The Ultimate Buddy Universal Applications Model No. Dual Roller Diameter Feed Speed Shipping Weight APF0300 APF /4 HP 3Ph, 220V Only 4 x 1 x 6 pcs Variable Speed, 6-56 FPM 192 lbs. For use in a wide variety of applications including table saws and shapers. Polyurethane covered rollers provide excellent grip while protecting the work surface. Variable feed rate allows easy adjustment after set-up. Dual row provides excellent grip and are split to allow blade or cutter clearance. Specially designed locks allow repeat positioning without additional adjustment. Powerful TEFC 3/4HP three phase motor Model No. Dual Roller Diameter Feed Speed Shipping Weight APF0400 APF /4 HP 3Ph, 220V Only 4 x 1 x 8 pcs Variable Speed, 6-56 FPM 200 lbs. 44

47 Band Saw Buddy I Model No. Roller Diameter APF0120 Max Height of Roller 7-7/8 Swing Rotation 30 O Blade to Roller Clearance Max. 8-1/4 Fence to Blade Clearance Max. 8-1/4 APF /2 HP 1Ph, 220V (2.55 AMPS) APF /2 HP 3Ph, 220V 9-1/2 1 piece Feed Size 15-3/4 x 7-7/8 Feed Speed Variable 2~ lbs. Call for table size compatibility. Pneumatic sensor will automatically adjust to workpiece width. Variable feed rate allows easy adjustment after set-up. Single cast steel roller positively grips the work surface. Large scaled roller fence included. Powerful TEFC motor available in single or three-phase Band Saw Buddy III Model No. Roller Diameter APF0019 Max Height of Roller 7-7/8 Swing Rotation APF /2 HP 1Ph, 220V (2.55 AMPS) APF /2 HP 3Ph, 220V 7 Split in 2 pcs at 1-1/2 each 30 O Blade to Roller Clearance Max. 8-1/4 Fence to Blade Clearance Max. 8-1/4 Feed Size 15-3/4 x 7-7/8 Feed Speed 10 Speeds, 3.5/6/7/10/12/19/20/25/38/50 FPM 239 lbs Call for table size compatibility. Spring loaded head applies the correct pressure to the workpiece. 10-speeds allow the optimum feed rate for each application. Two piece Large scaled roller fence included. Powerful TEFC motor available in single or three-phase. 45

48 E2800 Model No. E 2800 Rear Table Size (Fixed) Side Table Size (Fixed) Main Table Size (Cast Iron) Max. Horsepower Main Spindle RPM 4500 Main Sawblade Diameter Main Spindle Diameter Main Dust Outlets Scoring Saw Diameter Scoring Saw Arbor Scoring Saw Horsepower 448 mm x 724 mm x mm x 780 mm 20 x mm x 510 mm 37 x HP, 3 Ph (Optional 4.8 HP, 1Ph ) 300 mm/12 30 mm mm 120 mm/ mm 0.9 HP Scoring Saw RPM 6500 Rip Capacity Sliding Table size (LxW) Height of Worktable Max. Length of crosscut with Scoring Saw Depth of Cut 90 O /45 O Net Weight 1270 mm/ mm x 310 mm x mm/ mm mm/70 mm 467 kg/1030 lbs High quality European design, fit, and finish. Material used is the finest available for each component, CNC machined parts made to an extremely high tolerance. Precision SKF brand bearings used throughout the saw. Automated robotic welding assures perfect welds and long life. Laser cut parts assure an exact fit. Automated bending machines allow for repetitive and accurate panels. Aluminum extruded parts are carefully examined before assembly. Full functional overhead guard for added safety. Miter fence and clamp on sliding table are included. Motor controls are centrally located for ease of use. Standard 30mm blade arbor allows for a variety of blade choices. Scoring saw arbor is 20mm and easily accessible. Parallel fence features micro-adjustments for precise setup. Aluminum fence profile can be lowered for narrow tilted blade cuts. High efficiency motors deliver high output and low energy draw 46

49 Z3200 Model No. Z 3200 Rear Table Size (Fixed) Side Table Size (Fixed) Main Table Size (Cast Iron) Max. Horsepower 450 mm x 725 mm x mm x 645 mm 27.5 x mm x 707 mm 34.8 x HP, 3 Ph Main Spindle RPM 3000/4000/5000 Main Sawblade Diameter Main Spindle Diameter Main Dust Outlets Scoring Saw Diameter Scoring Saw Arbor Scoring Saw Horsepower 400 mm/16 30 mm mm 120 mm/ mm 0.9 HP Scoring Saw RPM 8200 Rip Capacity Sliding Table size (LxW) Height of Worktable Max. Length of crosscut with Scoring Saw Depth of Cut 90 O /45 O Net Weight 1380 mm/ mm x 420 mm 126 x mm/ mm mm/100 mm 859 kg/1894 lbs High quality European design, fit, and finish. Material used is the finest available for each component, CNC machined parts made to an extremely high tolerance. Precision SKF brand bearings used throughout the saw. Automated robotic welding assures perfect welds and long life. Laser cut parts assure an exact fit. Automated bending machines allow for repetitive and accurate panels. Aluminum extruded parts are carefully examined before assembly. Full functional overhead guard for added safety. Telescoping cross cut fence assures square cuts. Miter fence and clamp on sliding table are included. Front control of saw blade tilt includes an angle meter. Standard 30mm blade arbor allows for a variety of blade choices. Scoring saw arbor is 20mm and easily accessible. Parallel fence features micro-adjustments for precise set-up. Sliding table features 8 hardened steel rods inserted in the table extrusion for smooth wear-free operation. Load lock feature of the table assures it will not move when new panels are loaded. High efficiency motors deliver high output and low energy draw. 47

50 T120 BM3000 NXSD HX 310 PRO NZ 3200 Exclusive US Dealer 48 NLX TZ

51 Specialized Machines warranty liver is proud of our machines O and we stand by their quality and durability. If something does go wrong with your machine, we want to make sure it is made right. That s why Oliver s standard warranty is one of the best in the industry. Warranty: Oliver makes every effort possible to assure that its equipment meets the highest possible standards of quality and durability. All products sold by Oliver are warranted to the original customer to be free from defects for a period of 2 (two) years on all parts, excluding electronics and motors, which are warranted for 1 year. Oliver s obligation under this warranty shall be exclusively limited to repairing or replacing (at Oliver s option) products which are determined by Oliver to be defective upon delivery F.O.B. (return freight paid by customer) Oliver, and on inspection by Oliver. This warranty does not apply to defects due, directly or indirectly, to misuse, abuse, negligence, accidents, unauthorized repairs, alterations, lack of maintenance, damages caused in shipping, acts of nature, or items that would normally be consumed or require replacement due to normal wear. In no event shall Oliver be liable for death, personal or property injury, or damages arising from the use of its products. Oliver Machinery reserves the right to effect at any time, without prior notice, those alterations to parts, fittings, and accessory equipment which they may deem necessary for any reason whatsoever. All specifications in this catalog are subject to change without notice. All photos Oliver Machinery Company. Further warranty details are available by ing info@olivermachinery.net. r All efforts have been made to ensure that the information in this catalog is accurate. However, Oliver Machinery does not guarantee the accuracy of this information and reserves the right to change information in this catalog without notification. 49

52 For more information about Oliver Machinery products, or to find an authorized dealer nearest you, visit us online at or call toll free ph: fax: Oliver Machinery 6902 S. 194th St., Kent, WA All efforts have been made to ensure that the information in this catalog is accurate. However, Oliver Machinery does not guarantee the accuracy of this information and reserves the right to change information in this catalog without notification. V1 50