FLOOR PLAN 125" 3" " 23" 36" " S3S6 CVC212 27" 125" 27" 48" 2010 MASCO Retail Cabinet Group All Rights Reserved

Size: px

Start display at page:

Cynthia McKinney
5 years ago
Views:

1 36" " S3S6 CVC212 S3S6 CVC " 3" " S3S6 CVC212 23" WF3.57 WFOL3.18 WFOL PHOTOGRAPHY - HERITAGE HAWTHORNE MAPLE / ONYX 125" WSK1284 (2) RD12 18NH.W RD12 30NH.W WSK1284 (2) RD12 18NH.W RD12 30NH.W WBCST3348L-FPEB (2) OPWBC30 W18 30R.SR W3618 WAG R-MIP -1BIS1 -* CVGB WHCC P WHCP3619V EZR33R.WSS-VTK BPP S21 -KSCC 21 -FPEB -VTK BPP W1818L S21 WAG1812-WTCD 48L-MIP 21-1BIS1 -* CVGB -FPEB -VTK B36BUTT.DXFWT -STDW -FPEB -VTK W3618 WFS1296 / SBE8 BSS36.RPR-VTK WF6.42/RSP536 WF6.42/RSP536 WF3.30 BFOL3 W3618 B36BUTT.FH-VTK 3DXFWROT36 * B33BUTT.FH -FPEB-RTKL ROTDK33.24 WST18 48R -FPEB B18R.FH -VTK WF3.30 BFOL3 * RD3330NH.B * RD3330NH.B * RD3030NH.B * B33.FH -FPEB-RTKR * IECDR5020VG.RSP 27" *HAWTHORNE MAPLE CARDINAL W/ ONYX GLAZE HARDWARE: TBD (30) DOORS (8) DRAWERS TOP MOLDING: (4) STR8 (4) CCM8.NG LIGHT RAIL: (2) LCVLR8 TOE KICK: (5) WMTK8 ONYX FOR ALL LIGHTING: (3) LVLK.2.B (2) EXTN (2) FLLSWM.11 (1) FLLSWM.17 (1) FLC.1 (2) FLC.4 (2) FLLSHWB.AL MISCELLANEOUS: (2) VGSK18 (2) SM8 (2) * SM8 (1) TUKON (1) * TUKCARDINAL WF3.30 WFOL3.18 WF3.57 WFOL3.30 WFOL " FLOOR PLAN 48" 2010_HERITAGE_HAWFLOOR PLAN

2 W18 30R.SR EZR33 R.WSS BSS36.RPR 3DXFWROT36 WAG R BPPS 21 KSCC 21 HARMONY INSTALLATION 1 - ROTDK33.24 ROLLOUT TRAY DIVIDER KIT. REMOVE ONE OF THE WOOD SHELVES THAT COMES WITH CABINET. INSTALL THE TRAY DIVIDER KIT AT FLOOR OF CABINET. POSITION THE REMAINING WOOD SHELF ABOVE THE TRAY KIT. DXFWROT36 1-ROTDK WAG L BPPS 21 WTCD 21 HARMONY DETAILS 2010_HERITAGE_HAWHARMONY

3 FLLSHWB.AL TRANSFORMER LIGHTING LEGEND TRANSFORMER TRANSFORMER LVLK.2.B (LVLK.2.B) FLLSWM.11 FLLSWM.17 LVLK.2.B LVLK.2.B WF3.30 BFOL3 FLLSWM.11 EZR33R.WSS (1) LVLK.2.B: CENTER ONE FIXTURE INSIDE EACH GLASS DOOR CABINETS. SURFACE MOUNT TO CEILING. TRANSFORMER FOR THE ABOVE LIGHTS. LINK WITH FIRST LIGHT USING EXTN EXTENTION CORD PROVIDED. IF CORD IS NOT LONG ENOUGH - HARDWARE. POSITION TRANSFORMER ABOVE THE W1818L, FAR LEFT CORNER. (2) LVLK.2.B ATTACH FIXTURES TO UNDERSIDE OF WFS1296. SURFACE MOUNT. CENTER EACH FIXTURE ON EACH W3618 DOOR. TRANSFORMER FOR THE ABOVE LIGHTS: LINK WITH FIRST LIGHT USING EXTN EXTENTION CORD PROVIDED. POSITION TRANSFORMER ABOVE THE WBCST3348, AT BACK LEFT CORNER. FLLSWM'S: SNAP EACH FIXTURE INTO BACK GROOVE OF LIGHT RAIL. USE FLC.4 CORDS TO CONNECT LIGHTING TO TRANSFORMER. USE FLC.1 CORD TO CONNECT LIGHING IN CORNER. (2) FLLSHWB.AL: TRANSOFRMERS FOR THE ABOVE LIGHT STRIPS. POSITION ONE ABOVE THE WST1848R-BACK RIGHT CORNER. POSITION THE OTHER ABOVE THE W3618-BACK LEFT CORNER. LIGHTING DETAILS REFER TO MANUFACTURER'S INSTRUCTIONS FOR ADDITIONAL INFORMATION. 2010_HERITAGE_HAWLIGHTING

4 WF3.30 WFOL3.18 WF3.57 WFOL3.30 WFOL " " " 18" 48" 48" 18" " " 30" 2" 125" " " 18" 2 " 18" WSK1284 RD1218NH.W W1818L WAG L -MIP -1BIS1 -* CVGB VGSK18 BPPS21 -WTCD21 -FPEB -VTK B WHCC P WHCP3619V " (2) RD1218NH.W (2) RD1230NH.W B36BUTT.DXFWT -FPEB-STDW-VTK WSK1284 RD1218NH.W WAG R -MIP -1BIS1 -* CVGB VGSK18 BPPS21 -KSCC21 -FPEB -VTK A W3618 W1830 R.SR 33" WBCST 3348L -FPEB FILLER (2) OPWBC 30 C EZR33R.WSS-VTK INSTALLATION INSTRUCTIONS: WF3.30/WFOL3.18: CUT FILLER TO FIT (APPROX. 2"W X 18"H). CUT OVERLAY 3/16" LESS IN WIDTH THAN FILLER, ATTACH TO FILLER FACE FROM BEHIND AND INSTALL ALL TO LEFT FRAME OF W1818L. WF3.57/WFOL3.30/WFOL3.18: CUT FILLER TO FIT (APPROX. 2"W X 48"H). CUT OVERLAYS 3/16" LESS IN WIDTH THAN FILLER, ATTACH TO FILLER FACE WITH WFOL3.30 LINING UP WITH UPPER DOORS AND WFOL3.18 BELOW. SECURE FROM BEHIND. INSTALL ALL TO LEFT FRAME OF WAG181248L. (2) WSK1284: CUT TO 66" HIGH AND INSTALL AT SIDES AS SHOWN. (4) RD1218NH.W/(2)RD1230NH.W: INSTALL TO SKINS IN THE FOLLOWING ORDER. ONE SET OF RD1218NH.W AT TOP, ALIGNING W/ W1818 CABINET DOORS. RD1230NH.W SET IN MIDDLE, ALIGNING W/ UPPER DOORS OF WAG'S. FINAL SET OF RD1218NH.W AT BOTTOM, ALIGNING WITH LOWER DOORS OF WAG'S. SECURE DOORS FROM INSIDE CABINETS. (2) VGSK18: INSTALL SHELF KIT INSIDE GLASS DOOR CABINETS. USE SHELF POSTS PROVIDED. DISCARD WOOD SHELVES THAT COME WITH CABINETS. FILLER/(2)OPWBC30: CUT FILLER THAT COMES WITH WALL BLIND TO FIT. APPROX. 3"W X 48"H. CUT ONE OPWBC30 TO 17 5/8" HIGH. CUT INTO NEEDED WIDTHS TO COVER FILLER AND PULLED AREA OF WALL BLIND ON ELEVATION 2. MAINTAIN 3/16" MARGINS AND MITER AT CORNER. ATTACH AT TOP PART OF FILLER, ALIGNING W/ W3618 DOORS. CUT THE OTHER OPWBC30 INTO NEEDED WIDTHS TO COVER FILLER AND PULLED AREA OF WALL BLIND ON ELEVATION 2. MAINTAIN 3/16" MARGINS AND MITER AT CORNER. ATTACH TO LOWER PART OF FILLER, ALIGNING W/ W1830R.SR DOOR. WF3.30/BFOL3: CUT FILLER TO FIT (+/- 2" WIDE). CUT OVERLAY TO 3/16" LESS IN WIDTH THAN FILLER AND ATTACH TO FILLER FACE FRON BEHIND. INSTALL ALL TO LEFT FRAME OF LEFT BPPS21. PULL CASE OF THE B36BUTT.DXFWT CABINET TO 27" DEEP. WF3.30 BFOL3 5" 2" 21" ONYX WMTK8 (2) WF6.42 (2) RSP536 6" 6" 36" 21" D 33" (2) WF6.42: CUT TO 35"HIGH AND INSTALL EACH AT 23" DEEP, AT EACH SIDE OF THE PULLED B36BUTT CABINET. (2) RSP536: CUT TO 35'"HIGH, CUTTING EQUALLY FROM BOTH ENDS. INSTALL IN FRONT OF THE WF6.42'S SO FRONT OF LEGS ARE FLUSH WITH CABINET DOORS. DOOR BUFFER NOTE: INSTALL (1) ONE DOOR BUFFER PER DOOR. INSTALL ON HINGE SIDE, IN UPPER AREA OF DOOR ELEVATION 2010_HERITAGE_HAWEl 1

5 7/8" 114" " 2 " " 18" 48" " 5" 30" " 18" WINDOW 33" 36" OPWBC30 WBCST 3348L -FPEB OPWBC30 S3S3 EZR33R.WSS-VTK 36" " 125" 3" 36" " 3" 3" CVC212 WINDOW W3618 BSS36.RPR-VTK A CVC212 S3S3 ONYX WMTK8 WINDOW W3618 WFS1296 SBE8 B36BUTT.FH-VTK 3DXFWROT36 CVC212 S3S3 18" 23" WF3.57 WFOL3.18 WFOL3.30 WST18 48R -FPEB C B18R.FH -VTK 2" WF3.30 BFOL3 INSTALLATION INSTRUCTIONS: WF3.57/WFOL3.18/WFOL3.30: CUT FILLER TO FIT. (+/- 2"W X 48"H). CUT EACH OVERLAY 3/16" LESS IN WIDTH THAN FILLER. INSTALL THE WFOL3.18 AT TOP FACE OF FILLER, SECURING FROM BEHIND. ALIGN WITH TOP DOOR OF CABINET. INSTALL THE WFOL3.30 BELOW, SECURING FROM BEHIND AND ALIGNING WITH BOTTOM DOOR OF CABINET. WFS1296/SBE8: CUT SHELF TO 11 1/2" DEEP X 72" LONG. APPLY/CENTER SBE8 MOLDING TO FRONT EDGE AND INSTALL ALL UNDER THE W3618'S. (3) S3S3: CUT EACH TO FIT HEIGHT FROM UNDERSIDE OF WFS1296 TO COUNTERTOP. (+/- 47 1/8" HIGH). (3) CVC212: CENTER ON EACH S3S3, BUTTING TOPS TO UNDERSIDE OF WFS1296 SHELF. USE SMALL BRADS TO ATTACH. WF3.30/BFOL3: CUT FILLER TO FIT (+/- 2" WIDE). CUT OVERLAY TO 3/16" LESS IN WIDTH THAN FILLER AND ATTACH TO FILLER FACE. INSTALL ALL TO RIGHT FRAME OF B18R.FH. DOOR BUFFER NOTE: INSTALL (1) ONE DOOR BUFFER PER DOOR. INSTALL ON HINGE SIDE, IN UPPER AREA OF DOOR 33" 36" 36" 18" D 2" ELEVATION 2010_HERITAGE_HAWEl 2

INSTALLATION INSTRUCTIONS: 1 1 2 " (2) * RD3330NH.B / * RD3030NH.B: APPLY TO CABINET SIDES AS SHOWN, SPACING EQUALLY ON 48" WIDTH. ALIGN WITH DRAWER/DOOR OF B33'S. SECURE FROM INSIDE CABINETS.

6 INSTALLATION INSTRUCTIONS: " (2) * RD3330NH.B / * RD3030NH.B: APPLY TO CABINET SIDES AS SHOWN, SPACING EQUALLY ON 48" WIDTH. ALIGN WITH DRAWER/DOOR OF B33'S. SECURE FROM INSIDE CABINETS. CENTER DOOR WILL HIDE SEAM OF CABINETS " * * RD3330 RD3030 NH.B NH.B * RD3330 NH.B DOOR BUFFER NOTE: INSTALL (1) ONE DOOR BUFFER PER DOOR. INSTALL ON HINGE SIDE, IN UPPER AREA OF DOOR ONYX WMTK8 48" E ISLAND CABINETS IN MAPLE CARDINAL W/ ONYX GLAZE ELEVATION 2010_HERITAGE_HAWEl 3

(2) * RD3330NH.B * RD3030NH.B * IECDR5020VG.RSP INSTALLATION INSTRUCTIONS: 1 1 2" 34 1 2 " * B33BUTT.FH -FPEB-RTKL ROTDK33.24 DOOR BUFFER NOTE: INSTALL (1) ONE DOOR BUFFER PER DOOR.

7 (2) * RD3330NH.B * RD3030NH.B * IECDR5020VG.RSP INSTALLATION INSTRUCTIONS: 1 1 2" " * B33BUTT.FH -FPEB-RTKL ROTDK33.24 DOOR BUFFER NOTE: INSTALL (1) ONE DOOR BUFFER PER DOOR. INSTALL ON HINGE SIDE, IN UPPER AREA OF DOOR ONYX WMTK8 E 3 4 " 33" /4" 7 8 " /2" 1 8 " ISLAND CABINETS IN MAPLE CARDINAL W/ ONYX GLAZE. ELEVATION 2010_HERITAGE_HAWEl4

1 1 2 " 34 1 2 " * IECDR5020VG.RSP INSTALLATION INSTRUCTIONS: DOOR BUFFER NOTE: INSTALL (1) ONE DOOR BUFFER PER DOOR.

8 1 1 2 " " * IECDR5020VG.RSP INSTALLATION INSTRUCTIONS: DOOR BUFFER NOTE: INSTALL (1) ONE DOOR BUFFER PER DOOR. INSTALL ON HINGE SIDE, IN UPPER AREA OF DOOR ONYX WMTK8 4948" 1/2" ELEVATION ISLAND CABINETS IN MAPLE CARDINAL W/ ONYX GLAZE. 2010_HERITAGE_HAWEl 5

(2) * RD3330NH.B * RD3030NH.B * IECDR5020VG.RSP 1 1 2 " 34 1 2 " B33-FH -FPEB-RTKR INSTALLATION INSTRUCTIONS: DOOR BUFFER NOTE: INSTALL (1) ONE DOOR BUFFER PER DOOR.

9 (2) * RD3330NH.B * RD3030NH.B * IECDR5020VG.RSP " " B33-FH -FPEB-RTKR INSTALLATION INSTRUCTIONS: DOOR BUFFER NOTE: INSTALL (1) ONE DOOR BUFFER PER DOOR. INSTALL ON HINGE SIDE, IN UPPER AREA OF DOOR ONYX WMTK /2" 1 8 " 33" 3 4 " E ISLAND CABINETS IN MAPLE CARDINAL W/ ONYX GLAZE /4" 7 8 " ELEVATION 2010_HERITAGE_HAWEl6

10 2010_HERITAGE_HAWTHORNE.FINAL01 FLOOR PLAN

11 2010_HERITAGE_HAWTHORNE.FINAL01 FLOOR PLAN

12 2010_HERITAGE_HAWTHORNE.FINAL01 MOLDING 2

13 2010_HERITAGE_HAWTHORNE.L MOLDING 2

14 2010_HERITAGE_HAWTHORNE.FINAL01 MOLDING 2

15 TOP MOLDING A TOP MOLDING B CCM8.NG 4 13/16" 1 1/2" 3 5/16" ALIGN STR8 4 13/16" 1 1/2" 3 5/16" CCM8.NG STR8 DOOR CABINET FRAME 1/4" HOOD CHIMNEY BOTTOM MOLDING C FRONT BOTTOM MOLDING C SIDE DOOR CABINET FRAME CABINET FRAME ALIGN 1/8" 2" 2" LCVLR8 LCVLR8 MOLDING DETAIL NOT TO SCALE 2010_HERITAGE_HAWTHORNE.FINAL01 MOLDING

16 CABINET FRAME TOE BASE MOLDING D CABINET FRAME TOE BASE MOLDING E DOOR DOOR 5 3/4" 5" FLOOR WMTK8 TOE PLATFORM (BY OTHER) 5 1/4" 4 1/2" FLOOR WMTK8 TOE KICK 3 1/8" 3 1/8" MOLDING DETAIL NOT TO SCALE 2010_HERITAGE_HAWTHORNE.FINAL01 MOLDING 2

17 25" 125" 100" 25" TOP #1 28" NOTE: THIS DRAWING IS FOR CONCEPT USE ONLY. ALL DIMENSIONS NEED TO BE FIELD VERIFIED FROM THE INSTALLED CABINETRY. IT IS THE RESPONSIBILTY OF THE COUNTERTOP FABRICATOR TO FIELD VERIFY ALL DIMENSIONS. 125" 50" COOKTOP CUTOUT PER MANUFACTURER'S SPECIFICATIONS " TOP #2 55" 22" 25" 3" COUNTERTOP DETAILS 2010_HERITAGE_HAWCOUNTERTOP

2015 MASCO Cabinetry, LLC. All Rights Reserved

2015 MASCO Cabinetry, LLC. All Rights Reserved 144" 37 1 2" 24" 6" 24" 52 1 2 " 66" 57" WALL TO BE MOBILE PHOTOGRAPHY THE SINGLE PARENT KITCHEN (3) 2412 CORNER FLOATING SHELVES (3) LCVCS8 DISHWASHER *SB27.CG *BWBB15.AO (WASTE) *BWBB15.AO (RECYCLE)