2008 MASCO Retail Cabinet Group, LLC All Rights Reserved

Transcription

1 27" 27" 264" 237" WF3.39 S3S3 WC RD12 3/4 W CFO WC RD12 3/4 WF3.39 WHMCP4221V APDW (42"W X 23 1/2"H) W3039 W3039 (2) WFS2148 W3039 W3039 OC272493C (2) WFS2148 DTER.24 S3S6 BPPS42.2 SDO30 SDO30 SDO30 STDW PDO30 PDO30 27" 2009 PHOTOGRAPHY SET 2 KRAFTMAID CABINETRY MANDOLAY CHERRY - COGNAC STANDARD CONSTRUCTION HARDWARE: (39) # - DOORS (52) # - DRAWERS TOP MOLDINGS: (5) ACM8.VMS (5) STR8 BOTTOM MOLDINGS: (3) MLR8 (2) AWE8 TOE MOLDINGS: (11) " 48" 48" BC627- PSD24 W/ DISHWASHER DRAWER RDW2416 B36.FH V36C PSD24 W/ DISHWASHER DRAWER RDW2416 BC627- BF3 S3S3 (2) BC627 - FD BPPS24.2 BPPS24.2 BPPS24.2 WFS2448 WSK4848 FD B24L.FH B24L.FH B24R.FH BF3 FD WFS2448 WSK4848 FD TC62793 (2) WSK3684 WTH3615 ID24 WTH3615 ID24 216" 42" 90" MISCELLANEOUS: (3) TUKCG (6) SM8 (2) WSK2434 (5) MCS7 36" 36" BC627- B24L.FH 120" TC " 27" " 120" 72" " " BC627- (2) TC RD12 3/4 B36.FH - RD12 - WRK (4) WFS1236 (2) V36C 15" " " 42" 21" " 2 36" 36" 7 W ID24 FD PSD36 PSP3X3.30 (2) WPL9648 W3630-ID24 FD PSD36 PSP3X3.30 RD2430NH.W (2) RDW2412 WSK " WPL9634 WPL4834 BPPS36.2.DBER - RTKPR BPPS36.2 RTKP BPPS36.2.DBEL - RTKPL BC327 BC327 BC327 BC327 BC327 BC327 WC RD12 3/4 B21L (2) W21.FH 15L V24C MIP WC31530-RD12 3/4 B21R (2) W21.FH 15R MIP WC31530-RD12 3/4 (2) W21 B21R 15R.FH MIP WC31530-RD12 3/4 (2) W21 B21L 15L.FH MIP WC31530-RD12 3/4 (2) W21 B21R 15R.FH MIP (4) TC31596-RD12 3/4 WC31539 RD12 3/4 180" 27" 6 Printed: LAST REVISED:11/19/08 11/19/2008 PAGE 1 OF 19 FLOOR PLAN Scale : 0 3/16" = 1'

2 " 36" 36" " 48" 48" 27" 60" 6" INSTALLATION NOTES: (2) BC627-: INSTALL BC627- ON BOTH SIDES OF B24L.FH. (2) BC627-: INSTALL (1) BC627-RD24 TO THE LEFT OF PSD24 & DISH- WASHER DRAWER (ON RIGHT) & (1) TO THE RIGHT OF BSD24 & DISHWASHER DRAWER (ON RIGHT) 102" B36.FH - V36C: TRIM V36C TO 3W & INSTALL INSIDE B36.FH AGAINST TOP RAIL TO COVER PLUMBING, LINE UP WITH FACE FRAME OF CABINET " 2 " BC627 B24L.FH BC627 BC627 RDW2416 WSK2434 PSD24 B36.FH V36C RDW2416 WSK2434 PSD24 BC627 (2) RDW (2) WSK2434: TRIM WSK2434 AS NEEDED TO COVER FRONT OF DISHWASHER DRAWER TRIM KIT. SEE MANUFACTURER'S INSTRUCTIONS FOR PANEL SIZE. ATTACH RDW2434 TO FRONT OF WSK2434 FROM BEHIND AND INSTALL ON FRONT OF DISHWASHER DRAWERS. : INSTALL IN TOE KICK SPACE OF CABINETS. 24" 6" 36" 6" 24" 36" 24" ELEVATION 1 6" Printed: LAST REVISED:11/19/08 11/18/2008 PAGE 2 OF 19 El 1 Scale : 0 3/8" = 1'

3 INSTALLATION NOTES: 27" 264" 237" BF3 - S3S3: TRIM BF3 TO 1 1/2"W. TRIM S3S3 TO 1 5/16"W. ATTACH S3S3 TO THE FRONT OF BF3 FROM BEHIND & INSTALL BETWEEN STONE COLUMN ON LEFT & ON LEFT " 30" 30" 6" 42" 6" 30" 30" 3 4 " 27" " (2) BC627-: INSTALL ON BOTH SIDES OF BPPS " " " 18" 36" 12" W3039 WF S3S3 BF3 - S3S3 SDO30 W3039 SDO30 PDO " 30" 30" W CFO WHMCP4221V APDW (42"W X 23 1/2"H) (2) WFS2148 (2) WFS S3S6 (2) WC61539 RD12 3/4 (2) BC627- BPPS42.2 STDW B W3039 SDO30 PDO30 W3039 WF3.39 6" 42" 6" 30" 30" 3 4 " BF3 A OC272493C DTER24 27" " WF S3S3: TRIM WF3.39 TO 1 1/2"W. TRIM S3S3 TO 1 5/16"W. ATTACH S3S3 TO FRONT OF WF3.39 FROM BEHIND. INSTALL BETWEEN STONE COLUMN ON LEFT & W3039. (2) WC31539-RD12 3/4: INSTALL ON BOTH SIDES OF 12 3/4"D. W4224-CFO - WHMCP4221V - APDW (2) WFS2148: CENTER W4224-CFO OVER BPPS42.2 & 18" OUT FROM BACK WALL. USE (2) WFS2148 TO CREATE THE SIDES OF HOOD. TRIM WFS2148 TO 18"W X 23 1/2"H INSTALL WHMCP4221V INSIDE WHMM4231. ATTACH APDW TO FRONT OF WHMM4231 FROM BEHIND. (2) WFS S3S6: INSTALL ONE WFS2148 DIRECTLY UNDER W4224, 21"DEEP, NOTCHING AROUND & OVERLAPING WC61539-RD12 3/4. INSTALL THE SECOND 61 3/4" AFF. INSTALL S3S6 BETWEEN THE (2) WFS2148'S RETURNING BACK TO OVERLAP THE WC61539'S ON EACH SIDE OF HOOD. : INSTALL IN TOE KICK BOTTOM OF BASE CABINETS. ELEVATION 2 Printed: LAST REVISED:11/19/08 11/19/2008 PAGE 3 OF 19 El 2 Scale : 0 5/16" = 1'

4 INSTALLATION NOTES: 102" " " 18" 36" 12" 27" " 264" 237" 30" 30" 6" 42" 6" 30" 30" W3039 WF S3S3 BF3 - S3S3 SDO30 W3039 SDO30 PDO30 W CFO WHMCP4221V APDW (42"W X 23 1/2"H) (2) WFS2148 (2) WFS S3S6 (2) WC61539 RD12 3/4 (2) BC627- BPPS42.2 STDW B W3039 SDO30 PDO30 W3039 WF3.39 BF3 3 4 " 27" " A OC272493C DTER24 BF3 - S3S3: TRIM BF3 TO 1 1/2"W. TRIM S3S3 TO 1 5/16"W. ATTACH S3S3 TO THE FRONT OF BF3 FROM BEHIND & INSTALL BETWEEN STONE COLUMN ON LEFT & ON LEFT. (2) BC627-: INSTALL ON BOTH SIDES OF BPPS42.2. WF S3S3: TRIM WF3.39 TO 1 1/2"W. TRIM S3S3 TO 1 5/16"W. ATTACH S3S3 TO FRONT OF WF3.39 FROM BEHIND. INSTALL BETWEEN STONE COLUMN ON LEFT & W3039. (2) WC31539-RD12 3/4: INSTALL ON BOTH SIDES OF 12 3/4"D. W4224-CFO - WHMCP4221V - (2) WFS2148: CENTER W4224-CFO OVER BPPS42.2 & 18" OUT FROM BACK WALL. USE (2) WFS2148 TO CREATE THE SIDES OF HOOD. TRIM WFS2148 TO 18"W X 23 1/2"H INSTALL WHMCP4221V INSIDE WHMM4231. (2) WFS S3S6: INSTALL ONE WFS2148 DIRECTLY UNDER W4224, 21"DEEP, NOTCHING AROUND & OVERLAPING WC61539-RD12 3/4. INSTALL THE SECOND 61 3/4" AFF. INSTALL S3S6 BETWEEN THE (2) WFS2148'S RETURNING BACK TO OVERLAP THE WC61539'S ON EACH SIDE OF HOOD " 30" 30" 6" 42" ELEVATION 2 6" 30" 30" 3 4 " 27" " : INSTALL IN TOE KICK BOTTOM OF BASE CABINETS. DESIGNED:11/14/08 Designed: 11/18/2008 LAST Printed: REVISED:11/19/08 11/19/2008 PAGE 3 OF 19 El 2 Scale : 0 5/16" = 1'

5 27" 216" 42" 90" 42" 15" 78" 6" 36" 36" 6" 60" 102" 9 9" TC62793 WTH ID24 WTH ID24 A TC62793 WSK3684 INSTALLATION NOTES: (2) TC62793: TRIM TO FIT THE DEPTH OF REF. INSTALL ON BOTH SIDES OF BOTH REF. AND (2) WTH ID24'S. (2) WTH ID24: 9 AFF. AND ABOVE THE (2) REF. AND BETWEEN THE (2) TC62793'S. (2) WSK3684: TRIM WSK3684 TO FIT THE FRONT OF THE (2) REF. SEE MANUFACTURER'S INSTRUCTIONS FOR ACTUAL CUT OUT DIMENSIONS. WSK " 6" 2" 36" 36" ELEVATION " 6" 60" Printed: LAST REVISED:11/19/08 11/18/2008 PAGE 4 OF 19 El 3 Scale : 0 3/8" = 1'

6 INSTALLATION NOTES: (2) WSK4848: TRIM BOTH WSK4848 TO 34 1/2"H. ATTACH TO LEFT SIDE OF BPPS24.2 (ON LEFT) & LEFT SIDE OF B24L.FH IN E6. ATTACH SECOND WSK4848 TO RIGHT SIDE OF BPPS24.2 (ON RIGHT) & RIGHT SIDE OF B24R.FH IN E6. : CUT INTO (2) PIECES; 4 1/2"H, INSTALL IN TOE KICK SPACE UNDER BPPS24.2 ON LEFT & BPPS24.2 ON RIGHT. INSTALL ON FRONT OUTSIDE CORNERS OF CABINETS, LINING UP WITH FACE FRAME OF CABINET. (2) : ATTACH TO THE LEFT SIDE OF FD FROM E5. INSTALL BEHIND THE IN 21" SPACE REMAINING. ATTACH TO RIGHT SIDE OF RD FROM E7 IN 21" REMAIN- ING SPACE " " 6" " BPPS24.2 BPPS24.2 BPPS24.2 WSK4848 WSK4848 WFS2448 WFS " 24" 24" 24" 120" ELEVATION " (2) : INSTALL 21" OUT FROM BPPS24.2 ON LEFT & RIGHT SIDES, ATTACHING TO FD IN E5 AND E7. (2) WFS2448: INSTALL WFS2448 NOTCHED AROUND (ON BOTH LEFT AND RIGHT 4 1/2" AFF. ATTACH TO THE LEFT & RIGHT SIDES OF BPPS24.2 (ON TOP OF WSK4848) FOR ADDITIONAL SUPPORT. : INSTALL ALONG THE BOTTOM FRONT OF (3) BPPS24.2 CABINETS, CONT UNDER WFS2448 ON BOTH SIDES. ADDITIONAL SUPPORT IS NEEDED UNDER WFS2448. Printed: LAST REVISED:11/19/08 11/18/2008 PAGE 5 OF 19 El 4 Scale : 0 1/2" = 1'

7 INSTALLATION NOTES: (2) : ATTACH TO RIGHT SIDE OF FD ON LEFT, BEHIND THE. ATTACH TO THE LEFT SIDE OF FD ON RIGHT, BEHIND THE " 6" (2) WSK4848: TRIM (2) WSK4848 TO 34 1/2"H & ATTACH TO THE LEFT EXPOSED SIDE OF B24L.FH AND RIGHT EXPOSED SIDE OF BPPS24.2 (IN E4) AND RIGHT EXPOSED SIDE OF B24R.FH AND LEFT EXPOSED SIDE OF BPPS24.2 (IN E4) " WFS2448 B24L.FH B24L.FH B24R.FH WSK4848 WSK4848 WFS2448 : CUT INTO (2) PIECES: 4 1/2"H INSTALL (1) PSP3X3 UNDER B24L.FH IN FRONT LEFT CORNER IN TOE KICK SPACE. INSTALL (1) PSP3X3 UNDER B24R.FH IN FRONT RIGHT CORNER IN TOE KICK SPACE. 21" 24" 24" 24" 21" 120" ELEVATION 6 (2) : ATTACH TO FD ON BOTH LEFT & RIGHT SIDES, LINE UP WITH FACE FRAME OF CABINET. (2) WFS2448: NOTCH WFS2448 AROUND THE ON BOTH SIDES AND 4 1/2" AFF. ATTACH TO THE EXPOSED SIDES OF B24L.FH & B24R.FH AND (2) BPPS24.2'S IN E4 FOR ADDITIONAL SUPPORT. : INSTALL IN TOE KICK SPACE OF CABINETS AND UNDER THE WFS2448 ON BOTH SIDES TO FINISH. Printed: LAST REVISED:11/19/08 11/18/2008 PAGE 6 OF 19 El 6 Scale : 0 1/2" = 1'

8 Drawing 1 Drawing #: 0 INSTALLATION NOTES: (2) FD (2) : INSTALL BOTH FD212406'S SIDE BY SIDE & ATTACHED TO THE SIDES OF BPPS24.2 & B24L.FH (ON TOP OF WSK4848) REMOVE DRAWER FRONTS ON FD & REPLACE W. GIVING THE DRAWERS A DETAILED DRAWER FRONT. 6" " 24" " RDW2406 (2) FD (2) WSK4848 WFS2448 ELEVATION 5 (2) : ATTACH TO THE LEFT SIDE OF FD (ON LEFT) & TO THE RIGHT SIDE OF FD (ON RIGHT) BEHIND THE (2). (2) : ATTACH PXP3X3.34 TO THE LEFT SIDE OF FD ON LEFT AND THE RIGHT SIDE OF FD ON RIGHT. ANCHOR TO FLOOR AND COUNTERTOP. WFS2448: NOTCH WFS2448 AROUND THE ON BOTH SIDES AND ATTACH TO THE SIDES OF BPPS24.2 & B24L.FH(ON TOP WSK4848) 4 1/2" AFF. : INSTALL UNDER WFS2448 TO FINISH THE TOE KICK SPACE. RECESS 3 1/8" ALL THE WAY AROUND. INSTALLATION NOTES: (2) FD (2) : INSTALL BOTH FD212406'S SIDE BY SIDE & ATTACHED TO THE SIDES OF BPPS24.2 & B24L.FH (ON TOP OF WSK4848) REMOVE DRAWER FRONTS ON FD & REPLACE W. GIVING THE DRAWERS A DETAILED DRAWER FRONT. 7 8 " " 2 6" " PSP 3X3.34 (2) FD (2) WSK4848 WFS " 21" ELEVATION 7 (2) : ATTACH TO THE LEFT SIDE OF FD (ON LEFT) & TO THE RIGHT SIDE OF FD (ON RIGHT) BEHIND THE (2). (2) : ATTACH PXP3X3.34 TO THE LEFT SIDE OF FD ON LEFT AND THE RIGHT SIDE OF FD ON RIGHT. ANCHOR TO FLOOR AND COUNTERTOP. WFS2448: NOTCH WFS2448 AROUND THE ON BOTH SIDES AND ATTACH TO THE SIDES OF BPPS24.2 & B24L.FH(ON TOP WSK4848) 4 1/2" AFF. : INSTALL UNDER WFS2448 TO FINISH THE TOE KICK SPACE. RECESS 3 1/8" ALL THE WAY AROUND. Note: This drawing is an artistic interpretation of the general appearance of the design. It is not meant to be an exact rendition. DESIGNED:11/14/08 Designed :11/18/2008 LAST REVISED:11/19/08 Printed: 11/18/2008 PAGE 7 OF 19

9 9" 6 36" A WFS1236 V36C INSTALLATION NOTES: (2) TC31593-RD12 3/4: INSTALL (2) TC31593-RD12 3/4" COLUMNS ON EITHER SIDE OF B36.FH -RD " " " WFS1236 (2) TC31593 RD 12 3/4" WFS1236 WFS1236 B36.FH RD12 - WRK C C (4) WFS1236: INSTALL ONE SHELF ON TOP OF B36.FH AND ONE SHELF 9H, LINING UP WITH THE TOP OF THE (2) TC31593-RD12'S.THE TOP WFS1236 WILL NEED TO BE TRIMMEDIN DEPTH TO FIT BEHIND THE V36ST.M. EQUALLY SPACE THE REMAINING (2) WFS1236 BETWEEN THE (2) TC31593'S. V36C: 9H, BETWEEEN THE (2) TC31593'S LINE UP THE TOP OF V36SC WITH THE TOP OF THE (2) TC31593'S. V36C: TRIM V36C TO 4 1/2" ATTACH TO THE BOTTOM WRK ON B36.FH TO FINISH. V36C 21" 36" ELEVATION 8 Printed: LAST REVISED:11/19/08 11/18/2008 PAGE 8 OF 19 El 8 Scale : 0 1/2" = 1'

10 180" INSTALLATION NOTES: 26" 21" 21" 21" 21" 21" 37" (2) BC327-: INSTALL BC327- ON THE OUT- SIDE ENDS OF BASE CABINET RUN. 102" 9" 15" 15" " 21" W2115L WC3 MIP 1539 RD12 3/4 W2115L MIP TC32596-RD12 W2115R MIP W2115R MIP W2115R MIP (2) TC31596-RD12 W2115R MIP TC31596-RD12 W2115L MIP W2115L MIP (4) WC RD12 3/4 (4) BC327- W2115R MIP W2115R MIP WC RD12 3/4 V24C: TRIM V24C TO 18"W AND INSTALL IN- TOP, FLUSH W/ TOP RAIL OF THE B21L.FH / SINK CABINET & BETWEEN (2) SIDE RAILS ON LEFT TO COVER THE PLUMBING. (4) BC327-: TRIM (4) BC327'S TO 30"H INSTALL BC327'S BETWEEN EACH CABINET AS 4 1/2"AFF (2) WC31539-RD12 3/4: INSTALL ON BOTH LEFT & RIGHT OUTSIDE ENDS OF WALL CABINET RUN. (4) WC31530-RD12 3/4: CUT EACH WC31530-RD12 3/4 INTO (2) PIECES 15"H. INSTALL BETWEEN THE WALL CABINETS ON UPPER & LOWER RUN AS SHOWN. 54" " BC327 B21L.FH V24C B21R.FH B21R.FH B21L.FH B21R.FH 21" 21" 21" 21" 21" ELEVATION DE1 BC327 (4) TC31596-RD12 3/4: TRIM ONE OF THE TC31596'S INTO (3) PIECES ALL 21"H. INSTALL (1) TC31596-RD12 3/4 HORIZONTALLY ACROSS THE TOP OF THE CABINETS AND (1) OF THE 21"H PIECES HORIZONTALLY BUTTING AS TIGHT AS POSSIBLE. DO THE SAME FOR THE SECOND TC31596-RD12 3/4 INSTALL HORIZONTALLY BETWEEN THE UPPER CABINETS AND LOWER CABINETS. DO THE SAME FOR THE THIRD TC31596 AND INSTALL BELOW THE WALL CABINETS AS SHOWN. DESIGNED:11/14/08 Designed: 11/18/2008 LAST Printed: REVISED:11/19/08 11/19/2008 PAGE 9 OF 19 DE1 Scale : 0 3/8" = 1'

11 1 1 2 " " BPPS36.2.DBEL - RTKPL BPPS36.2 RTKP BPPS36.2.DBER - RTKPR INSTALLATION NOTES: : RUN ALONG THE BOTTOM, FRONT, SIDE AND BACK OF THE BPPS36.2'S. 36" 36" 108" 36" ELEVATION DE2 Printed: LAST REVISED:11/19/08 11/18/2008 PAGE 10 OF 19 DE2 Scale : 0 1/2" = 1'

12 (2) INSTALLATION NOTES: " 1 4 " WPL WPL " 108" ELEVATION DE3 WPL WPL4834: TRIM WPL4834 TO 12"W.APPLY PANELS TO THE BACK OF THE CABINETS IN DE2. (2) PXP3X3.34: INSTALL LEGS 12" OUT FROM BACK OF CABINETS IN DE2 LINING UP OUTSIDE EDGES ON BOTH ENDS OF CABINET RUN. Printed: LAST REVISED:11/19/08 11/18/2008 PAGE 11 OF 19 DE3 Scale : 0 1/2" = 1'

13 INSTALLATION NOTES: INSTALLATION NOTES CONT " 2 36" 7 36" " (2) PSD36: INSTALL PSD36'S TO LEFT & RIGHT OF FIREPLACE. PULL FACE FRAME FLUSH WITH FRONT OF FIREPLACE SURROUND. WSK2484: TRIM WSK2484 TO 54"H & APPLY TO LEFT EXPOSED SIDE OF STACKED CABINETS; W3030-ID24 FD362412, PSD36 FROM INSIDE OF CABINETS. 102" 16 12" 1 2 " 12" 30" 6" " RD24 30NH.W WSK2484 RDW 2412 RDW " 36" " MCS7 W ID24 FD PSD36 (2) WPL9648 STONE FIREPLACE SURROUND ELEVATION DE4 MCS7 W ID24 FD PSD36 36" " (2) : TRIM (2) INTO (4) PIECES; 4 1/2"H INSTALL (4) PSP'S IN FRONT RIGHT & LEFT CORNERS OF PSD36'S ON BOTH SIDES OF FIREPLACE, LINE UP FOOT W/ FACE FRAME ON FRONT AND ON SIDES OF PSD36. (2) FD362412: INSTALL ON TOP OF PSD36, LINING UP THE FACE FRAMES. INSTALL ON BOTH LEFT & RIGHT SIDES OF FIREPLACE. (2) W ID24: INSTALL W3630-ID24 ON TOP OF FD362412, LINING UP THE FACE FRAMES ON BOTH SIDES OF FIREPLACE. (2) WPL9648: TRIM (2) WPL9648 INTO (3) SECTIONS; (1) 7W X 37 1/2"H (FROM ONE PANEL) (2) 24"W X 37 1/2"H (FROM SECOND PANEL) APPLY FIRST PANEL TO THE FRONT OF THE SECTION ABOVE THE MANTEL. APPLY THE (2) SMALLER PANELS TO THE SIDES OF THE FIRST SECTION, RETURNING BACK TO THE WINDOWS TO FINISH. RD2430NH.B: ATTACH TO LEFT EXPOSED SIDE OF W3030-ID24 (ON TOP OF WSK2484) FROM INSIDE OF CABINET. ALIGN TOP & BOTTOM OF DECO DOOR W/ TOP & BOTTOM OF CABINET DOORS. RDW2412: ATTACH TO THE LEFT EXPOSED SIDE OF FD (ON TOP OF WSK2484) FROM INSIDE OF CABINET. ALIGN TOP & BOTTOM OF RDW WITH CABINET DRAWER. RDW2412: ATTACH TO THE LEFT EXPOSED SIDE OF PDS36 (ON TOP OF WSK2484) FROM INSIDE OF CABINET. ALIGN TOP & BOTTOM OF RDW WITH CABINET DRAWER. MCS7: TRIM TO FIT AROUND BOTH WINDOWS TO FINISH AS TRIM. DESIGNED:11/14/08 Designed: 11/18/2008 LAST Printed: REVISED:11/19/08 11/18/2008 PAGE 12 OF 19 DE4 Scale : 0 3/8" = 1'

14 Note: This drawing is an artistic interpretation of the general appearance of the design. It is not meant to be an exact rendition. Printed: LAST REVISED:11/19/08 11/18/2008 PAGE 13 OF 19 FLOOR PLAN

15 Note: This drawing is an artistic interpretation of the general appearance of the design. It is not meant to be an exact rendition. Printed: LAST REVISED:11/19/08 11/18/2008 PAGE 14 OF 19 FLOOR PLAN

16 Note: This drawing is an artistic interpretation of the general appearance of the design. It is not meant to be an exact rendition. Printed: LAST REVISED:11/19/08 11/18/2008 PAGE 15 OF 19 FLOOR PLAN

17 Note: This drawing is an artistic interpretation of the general appearance of the design. It is not meant to be an exact rendition. Printed: LAST REVISED:11/19/08 11/19/2008 PAGE 16 OF 19 FLOOR PLAN

18 MOLDING DETAILS TOP MOLDING CABINET FRONT DETAIL - A TOP MOLDING CABINET SIDE DETAIL - A ACM8.VMS 2 5/8" ACM8.VMS 2 5/8" STR8 2" STR8 2" ALIGN DOOR WALL CABINET 1/4" MOLDINGS: (5) ACM8.VMS (3) MLR8 (2) AWE8 BOTTOM MOLDING CABINET SIDE DETAIL - B DOOR WALL CABINET BOTTOM MOLDING CABINET FRONT DETAIL - B MLR8 1/4" WALL CABINET 2" ALIGN MLR8 2" WOOD FURNITURE SHELF DETAIL - C WFS1236 AWE8 7/8" 1 9/16" Printed: LAST REVISED:11/19/08 11/18/2008 PAGE 17 OF 19 MOLDING Scale : 0 3/8" = 1'

19 CABINET HARDWARE PLACEMENT (39) # - DOORS (52) # - DRAWERS Centerline of bottom rail WALL CABINETS WTH3615-ID24 7" Centerline of stile Centerline of bottom rail Centerline of top rail 7" Centerline of top rail W3630-ID24 (FIREPLACE CABINETS) DRAWERS (27" OR LARGER) Centerline of top rail BASE CABINETS DRAWERS (24" OR SMALLER) Designed: DESIGNED:11/14/08 11/13/2008 Printed: LAST REVISED:11/19/08 11/16/2008 PAGE 18 OF _PHOTO_SET2_FINAL HARDWARE Scale : 0 1/2" = 1'

20 COUNTERTOP DETAILS " 25" COOKTOP JOBSITE 24" MUST HAVE A 1" CLIP ON THIS END OF C-TOP TO MATCH DEPTH OF PANTRY " 1" " SINK JOBSITE 50" 25" 122" " THIS DRAWING IS FOR CONCEPT USE ONLY. ALL DIMENSIONS NEED TO BE FIELD VERIFIED FROM THE INSTALLED CABINETRY. IT IS THE RESPONSIBILITY OF THE COUNTER TOP FABRICATOR TO FIELD VERIFY ALL DIMENSIONS. 25" 25" SINK JOBSITE 110" 125" 38" Designed: DESIGNED:11/14/08 11/13/2008 Printed: LAST REVISED:11/19/08 11/13/2008 PAGE 19 OF _PHOTO_SET2_FINAL COUNTERTOPS Scale : 0 3/16" = 1'