AVK PNEUMATIC TOOLS PROFILE

Transcription

1 VK PNUMTI S PROIL VK has selected the RO rand Pneumatic Tool for its ergonomic design and outstanding dependability. The rocker style forward and reverse trigger is easy and comfortable to use. The VK pneumatic tool features a Quickhange thread adaption kit. This patented* feature allows for easy access to the thread size component parts. VK s Pneumatic tools provide the highest RPM for the thread size selected resulting in optimum installation speed. THR PTION *Patent No. 4,121,444 HOW TH VK WORKS The operator quarter turns an VK threaded insert onto the tool mandrel and places it into the hole in the parent material. The top trigger is depressed and the tool mandrel spins into the insert. The head of the threaded insert is gripped by the knurling at the nose piece preventing it from spinning as the threaded area of the insert walks up the mandrel. s this occurs, the VK insert expands within the hole wall providing hole fill and then forms a secondary flange against the backside of the parent material. The tool continues to torque the insert s threads causing the knurling to bite into the backside edge of the parent material. The tool then stalls when it reaches its predetermined stall torque. This occurs even if the parent material varies in thickness. The tool needs no adjustment to install VK s products in variable thickness materials. The operator then presses the lower reverse trigger and the mandrel spins out of the installed part. SIN NITS The VK RO tool uses torque to install the VK product. It needs no adjustment to install the product in variable thickness material. The ergonomic design of the VK RO tool makes it feel comfortable to the operator and weighs in at 3 lbs. (6 kg). The rocker style trigger is easy to use & minimizes operator fatigue. The knurled nose assembly eliminates any torque kick during installation. Preventative maintenance is quick and easy with VK s patented* quickchange thread adaption kit. No tools are required. The rugged design of the tool casing, its components and the VK thread adaption kit provides you with reliability. ITIONL SIN TYPS SPIL SINS VK can design a thread adaption kit nose assembly to fit your particular application needs. RIHT NL SIN The Right ngle Inline Style Tool is designed for limited access applications. H ORMIN THR PTION Head orming T..K. is available to contour the VK insert s head to the radius of a tube to increase torque capability. INLIN SIN The Inline Style Tool is designed for vertical installations.

2 VK PNUMTI SPIITIONS The tool shown on this page has been specifically designed to install the L, K, H, P and O Series Inserts. I. I. I. Once you have selected the type of insert and thread size select the appropriate RPM tool from the chart below. IMNSIONL T / UP RQUIRMNTS WIHT LS. (Kg) 3.25 (1.46) RPM 5.37 (136,3) (212,5) I (38,10) I (36,06) I. MX. (12,7).640 (16,25). (22,86) N (N) PROPR IR SUPPLY UP RQUIRS: PSI ( RS) dynamic (tool running) air pressure at 25 S...M. ir pressure gauge and regulator 5/16 or 7,92 mm minimum hose I 5/16 or 7,92 mm minimum fittings I SPIL TUR The KPT nose cone design incorporates a special pilot/serrated tip that is essential to proper insert installation. The K prefix in the tool part number designates this feature THR PTION IR SLTION / SPR PRTS THR SIZ OMPLT PRT NUMR THR PTION HX RIV MNRL 10 PR RIN ON YNMI IR TINS PSI RS This chart designates the tool, spare parts and dynamic (tool running) air pressure requirements for our most popular steel product. onsult the VK tool catalog or contact an VK Sales Representative for tool RPM and air pressure settings for aluminum, brass and monel product. 632 UN 832 UN 1024 UN 1032 UN 1/420 UN 5/1618 UN 3/816 UN 1/213 UN M12 x 1,75 ISO KPT30P632 KPT30P832 KPT15P1024 KPT15P1032 KPT9P420 KPT6P518 KPT6P616 KPT3P813 KPT30P470 KPT15P580 KPT9P610 KPT6P8125 KPT6P1015 KPT3P12175 KPT632TK KPT832TK KPT1024TK KPT1032TK KPT420TK KPT518TK KPT616TK KPT813T KPT470TK KPT580TK KPT610TK KPT8125TK KPT1015TK KPT12175T 29NPT22 29NPT23 29NPT26 29NPT24 29NPT10 29NPT27 3SH632 3SH832 3SH SH SH420 3SH SH SH SH SH SH SH SH SH PT1 32PT2 32PT7 32PT3 32PT6 32PT7 32PT10 77KPT6 77KPT8 77KPT10 77KPT10 77KPT250 77KPT KPT375 77KPT500 77KPT470 77KPT580 77KPT610 77KPT KPT KPT NOT: UN IN THR OMPONNTS R VILL. PRVNTTIV MINTNN RQUIRMNTS: The bearing set must be kept in a WT lubricated condition to assure proper tool operation. VK suggests the use of high temperature grease such as LURIPLT RN 930. The tool mandrel should be inspected for thread wear or damage and replaced. To test the condition of the mandrel, thread an VK insert onto the mandrel backwards until it touches the pilot. If any drag is still felt, replace the mandrel with a new socket head cap screw.

3 VK PNUMTI SPIITIONS The tool shown on this page has been specifically designed to install the T, W, L and H Series Inserts. Once you have selected the type of insert and thread size select the appropriate RPM tool from the chart below. I. I. I. IMNSIONL T / UP RQUIRMNTS PROPR IR SUPPLY UP RQUIRS: PSI ( RS) dynamic (tool running) air pressure at 25 S...M. ir pressure gauge and regulator 5/16 or 7,92 mm minimum hose I 5/16 or 7,92 mm minimum fittings I WIHT LS. (Kg) 3.25 (1.46) RPM (212,5) I (38,10) I (36,32) I. MX.. (8,89). (15,24).625 (15,87). (22,86) N (N) SPIL TUR The NPT nose cone design incorporates a special serrated tip that is essential to proper insert installation. The N prefix in the tool part no. designates this feature. THR PTION IR SLTION / SPR PRTS THR SIZ OMPLT PRT NUMR THR PTION HX RIV MNRL 10 PR RIN ON YNMI IR TINS PSI RS This chart designates the tool, spare parts and dynamic (tool running) air pressure requirements for our most popular steel product. onsult the VK tool catalog or contact an VK Sales Representative for tool RPM and air pressure settings for aluminum, brass and stainless product. 440 UN 632 UN 832 UN 1024 UN 1032 UN 1/420 UN 5/1618 UN 3/816 UN 1/213 UN M3 x 0,5 ISO M12 x 1,75 ISO NPT30P440 NPT30P632 NPT30P832 NPT15P1024 NPT15P1032 NPT15P420 NPT6P518 NPT6P616 NPT3P813 NPT30P NPT30P470 NPT15P580 NPT15P610 NPT6P8125 NPT6P1015 NPT3P12175 NPT440TK NPT632TK NPT832TK NPT1024TK NPT1032TK NPT420TK NPT518TK NPT616TK NPT813T NPTTK NPT470TK NPT580TK NPT610TK NPT8125TK NPT1015TK NPT12175T 29NPT1 29NPT2 29NPT3 29NPT26 29NPT8 29NPT9 29NPT10 29NPT27 3SH SH SH SH1024 3SH1032 3SH SH SH SH SH20 3SH SH SH SH SH SH NPT4 30NPT6 30NPT8 30NPT10 30NPT10 30NPT250 30NPT NPT375 30NPTM3 30NPTM4 30NPTM5 30NPTM6 30NPTM8 32PT10 77NPT4 77NPT6 77NPT8 77NPT10 77NPT10 77NPT250 77NPT NPT375 77NPT500 77NPTM3 77NPTM4 77NPTM5 77NPTM6 77NPTM8 77NPT NPTM NOT: UN IN THR OMPONNTS R VILL. PRVNTTIV MINTNN RQUIRMNTS: The bearing set must be kept in a WT lubricated condition to assure proper tool operation. VK suggests the use of high temperature grease such as LURIPLT RN 930. The tool mandrel should be inspected for thread wear or damage and replaced. To test the condition of the mandrel, thread an VK insert onto the mandrel backwards until it touches the knurled nose cone. If any drag is still felt, replace the mandrel with a new socket head cap screw.

4 VK PNUMTI SPIITIONS I. I. The tool shown on this page has been specifically designed to install the S Series Stud. Once you have selected the type of stud and thread size refer to the chart below for air tool selection. I. IMNSIONL T / UP RQUIRMNTS WIHT LS. (Kg) RPM (196,85) (196,85) (212,6) I. I. I. MX. (12,7).640 (16,25) PROPR IR SUPPLY UP RQUIRS: PSI ( RS) dynamic (tool running) air pressure at 25 S...M. ir pressure gauge and regulator 5/16 or 7,92 mm minimum hose I 5/16 or 7,92 mm minimum fittings I SPIL TUR This tool nose cone design incorporates a special serrated tip that is essential to proper installation. THR PTION IR SLTION / SPR PRTS THR SIZ OMPLT PRT NUMR THR PTION THR RIV RIN ON YNMI IR TINS PSI RS 632 UN 832 UN 1024 UN 1032 UN 1/420 UN 5/1618 UN 3/816 UN SPT30P632 SPT30P832 SPT15P1024 SPT15P1032 SPT9P420 SPT6P518 SPT6P616 SPT30P470 SPT15P580 SPT9P610 SPT6P8125 SPT6P1015 SPT632TK SPT832TK SPT1024TK SPT1032TK SPT420TK SPT518T SPT616T SPT470TK SPT580TK SPT610TK SPT8125T SPT1015T 29SPT632 29SPT832 29SPT SPT SPT420 29SPT518 29SPT616 29SPT470 29SPT580 29SPT610 29SPT SPT SPT8 77SPT8 77SPT10 77SPT10 77SPT4 77SPT SPT SPT8 77SPT10 77SPT4 77SPT SPT NOT: ir pressure settings are specified dynamic (tool running). PRVNTTIV MINTNN RQUIRMNTS: The bearing set must be kept in a WT lubricated condition to assure proper tool operation. VK suggests the use of high temperature grease such as LURIPLT RN 930.

5 VK PNUMTI SPIITIONS The tool shown on this page has been specifically designed to install the R Series Inserts. VK recommends that trial installations be performed to determine the optimum tool for the fastener selected using actual application materials and hole sizes. Tool RPM and parent material density will affect the grip range of the fastener. See the chart below for guidelines. IMNSIONL T / UP RQUIRMNTS I. I. I. PROPR IR SUPPLY UP RQUIRS: PSI ( RS) dynamic (tool running) air pressure at 25 S...M. ir pressure gauge and regulator 5/16 or 7,92 mm minimum hose I 5/16 or 7,92 mm minimum fittings I WIHT LS. (Kg) RPM I. I. I. MX. (12,70) SPIL TUR The NPT nose cone design incorporates a special serrated tip that is essential to proper insert installation. The N prefix in the tool part number designates this feature. THR PTION IR SLTION / SPR PRTS VK PRT NUMR RS RS RS RS RS RS RS RS RS RS PRNT MTRIL STL, LUMINUM LOW, ROTTIONL IRLSS SML SOT PLSTIS RIP RN RIP RN ,1 12, NOT: UN IN THR OMPONNTS R VILL. PRVNTTIV MINTNN RQUIRMNTS: OMPLT PRT NUMR RPT15P RPT9P RPT15P RPT9P RPT9P RPT9P RPT6P RPT15P RPT9P RPT15P RPT9P RPT9P RPT9P RPT6P THR PTION RPT420280TK RPT420500TK RPT518280TK RPT518500TK RPT616280TK RPT6107.1TK RPT TK RPT TK RPT TK RPT TK HX RIV SRW MNRL RIN ON YNMI IR TINS PSI RS 3SH NPT SH NPT SH NPT SH NPT SH NPT SH PT6 77NPTM SH PT6 77NPTM SH PT7 77NPTM SH PT7 77NPTM SH PT10 77NPT This chart designates the tool, spare parts and dynamic (tool running) air pressure requirements for our most popular steel product. The bearing set must be kept in a WT lubricated condition to assure proper tool operation. VK suggests the use of high temperature grease such as LURIPLT RN 930. The tool mandrel should be inspected for thread wear or damage and replaced. To test the condition of the mandrel, thread an VK insert onto the mandrel backwards until it touches the pilot. If any drag is still felt, replace the mandrel with a new socket head cap screw.